I live in Dubai, UAE. I used to get LTE with the default OS but when I flash custom or other country's ROMs I don't get LTE, at most just 3G. What number should I write in ro.telephony.default_network in build prop? Or is there any other way to fix this?
Please help.
I see the general consensus is that the tmobile note 4 cannot be used on verizon. Is the radio purely software controlled? Could I just flash another baseband and modem?
I did notice when I installed cm12 and inserted my verizon sim I was able to get 4g and data access but not on the stock tmo rom. Voice did not work as well. Is there anything I can do? I dont really want to have to shell out for the verizon version with an unlocked bootloader.
Thanks
I am having signal issues with the n9100 (china mobile). Currently I am in Canada on Rogers network. I have rooted the phone and currently using a custom Rom (Aurora). The firmware is on 5.1.1 and baseband is on the latest. I do get 4G signal but it gets weak when I am inside my house and usually is in Edge mode. The signal was decent when I was in China. I am sure its a modem issue, but is it possible to install a rogers modem onto this without bricking (probably lose dual sim but thats ok)? If not, is there a fix? Can I force my phone to use a certain frequency/band that Rogers uses and see if that helps?
Hi all,
I own a SM-A500M phone. The phone has unlocked stock rom (original rom is not modified by carrier) and updated trough OTA to android 5.0.2. I know 4g does work in my phone because I could use it with my prior carrier, but I recently changed to CLARO and with this new provider I don't have 4g acces, only H+ and it is really slow and laggy connection.
I know the following:
1) Sim card is a compatible 4g nano sim
2) The carrier CLARO has 4g coverage where I live
3) The phone is not the problem
4) I have tried all the usual FAQS (APN's, select LTE in config, reboot) with no success.
5) The phone's variant is right (latinoamerican brand), so It can't be due to frequencies or bands problems.
I asked for help in CLARO and told me that this has happened amongst users with unlocked phones (that is, rom not modified with CLARO's bloatware), and the solution is to flash CLARO's rom. But the problem with this solution is that CLARO hasn't released android 5.0.2 update (and I think it will never update) and I really like android 5 and wouldn't want to return to 4.4.
So, is it true? Is there a chance to fix this problem with minor tweaks? What is the problem here?
Since I recently acquired this phone, I would prefer not lossing warranty, so rooting and custom roms might not be an option.
Thanks in advance. Kind regards!
You could try to flash their rom and check if it works. Then you can be 100% sure that hardware/chip/network provider are fine. I have the same phone on since last week, but still did not go to get the chip at a movistar office. Maybe you need to activate the chip and they refuse to do it unless you get their rom. Maybe just getting their rom, and then flashing back the updated stock one or a CM or whatev would be enough.
I've purchased an unlocked Verizon S7 Edge, model SM-G935V, but haven't received it yet. I'm an AT&T customer. The phone should work on AT&T's network since it's unlocked, but I just realized it'll probably still have Verizon-ified firmware, and might not work with certain AT&T-specific features like HD voice, video calling, or voicemail. How will the Verizon firmware behave when it's on the AT&T network? Can I install the latest AT&T firmware on this phone instead, using a similar method to what people are doing for the 935U firmware? I prefer a stock AT&T firmware rather than a beta or rooting. Thanks in advance!
There's another thread in this forum "Stock Firmware for SM-935A (AT&T)". Should I just flash that to my unlocked SM-935V, and essentially turn it into a 935A? I believe the hardware of all S7 Edge models is identical, so I'm hoping that will work.
I did this and applied the 7.0 update - and now I can't seem to revert to any other software. If I were you, I'd flash the U update and forget about carrier-specific garbage.
raduque said:
I did this and applied the 7.0 update - and now I can't seem to revert to any other software. If I were you, I'd flash the U update and forget about carrier-specific garbage.
Click to expand...
Click to collapse
Thanks. Did you have any problems getting LTE data to work with your 935V once it was on the AT&T network? I saw a few mentions from people saying they could only get slower data connections, until they called AT&T to "provision LTE for their SIM" or something. I get the impression it's not enough just to have an AT&T SIM card - like the AT&T network has a registry of phone IDs, and non-AT&T branded phones won't be in it, and so won't get LTE data.
From browsing the 935U thread, it sounds like that firmware is receiving updates much more slowly than the carrier-specific firmwares. The U firmware also wouldn't provide the missing AT&T-specific features I was looking for, like HD voice or WiFi calling, so I'm not convinced it would really be an improvement over just keeping the Verizon fw. But maybe I'll feel differently once I actually get my hands on the phone and play with it - all I'm doing now is reading forum threads and checking my mailbox.
Honestly couldn't tell you. I'm on Verizon with my main device (S7e on U FW). I only flashed the AT&T FW (PK1) so I could flash the unreleased Nougat files.
Now, I can't seem to flash anything but an AT&T rom.
Also FWIW, the U firmware is getting updates slower than carrier roms, but it's still the better rom - untouched by the carrier's bumbling idiot of a dev team, no pre-loaded carrier junk you can't get rid of (only disable), better battery life and better performance.
More FWIW, I don't care about HD Voice or Wifi calling - both those are irrelevant to me.
At&t release today on 2/17/17 official update to Nougat 7.0 build BQA6 with February security.
Clicking from Edge of Galaxy.
I want to do the opposite - flash G935V onto G935A, with the intention of eventually being able to flash back G935A. Not sure if I could do this, though.
Sent from my SM-G930V using Tapatalk
I've got my phone working now. The short answer is yes, as far as I've found, you can flash any carrier's firmware to your S7 Edge. There may be some limitations if the bootloader version on your phone is different from the new firmware's bootloader version, but fortunately I didn't run into that. I went from the Verizon firmware to the AT&T firmware and then to the unbranded 935U firmware.
But for best results, a branded S7 Edge should be used with the same branded firmware, and on the same network. Otherwise you may run into some problems, or certain carrier-specific features won't work. In my case, my Verizon-branded S7 Edge is unable to get Wifi calling and HD Voice (aka VoLTE) on the AT&T network with an AT&T SIM card, no matter what firmware version I use.
s.chamberlin said:
I've got my phone working now. The short answer is yes, as far as I've found, you can flash any carrier's firmware to your S7 Edge. There may be some limitations if the bootloader version on your phone is different from the new firmware's bootloader version, but fortunately I didn't run into that. I went from the Verizon firmware to the AT&T firmware and then to the unbranded 935U firmware.
But for best results, a branded S7 Edge should be used with the same branded firmware, and on the same network. Otherwise you may run into some problems, or certain carrier-specific features won't work. In my case, my Verizon-branded S7 Edge is unable to get Wifi calling and HD Voice (aka VoLTE) on the AT&T network with an AT&T SIM card, no matter what firmware version I use.
Click to expand...
Click to collapse
Really? That's strange. I successfully flashed V firmware on my A and HD voice & WiFi Capping are active
Sent from my SM-G935V using Tapatalk
So you did the opposite direction of what I did? I've read that AT&T is more restrictive about these features than some other carriers, which is maybe why it didn't work for me. I can't find it now, but there was an AT&T community forums thread in which a rep straight-out said that those features won't work on a non-AT&T-branded phone or other unlocked "bring your own device" phone.
To be fair, I'm not certain HD Voice isn't working, since there doesn't seem be a definitive way to test for it. With the AT&T firmware, attempting to turn on wifi calling would give me an error saying it couldn't be activated on my device. With the unbranded 935U firmware and an AT&T SIM card installed, I don't even see an option for turning on wifi calling.