[Q] Bluetooth carkit problem om cm11 - Galaxy Note 3 Q&A, Help & Troubleshooting

I have the folowing problem when I pair my note3 with my bluetooth radio.
When I make a call it works. I can talk over bluetooth and everything is ok. I can hear the other party and the can here me (over bluetooth)
But when i end the call or the other party ends the call and i try again a next (second) call the problem occurs;
I cannot hear the other party nor they can hear me. Also if I choose for speaker or earpeace i hear nothing.
But when i shut off bluetooth (during the call) i can hear and the other party can hear me too again (but not over bluetooth because it is off)
Next, the third call I get the same, the fourth call same etc..
i have to reboot the phone and then it works again ONLY ONE time and than same problem.
I tried al lot of nigtly's, but same problem
Ik had the exactly the same problem on note 2. On TW rom it works fine.

Update..
Normally my bluetooth is off. When I get in the car I turn bluetooth on. I can make a call and that works great. Audio is good, no problem. But if the call is ended (It doesn't matter if I or the other party ends the call) and I try a second (and a third end so on) call I hear nothing and the other party doesn't hear me also.
I found out that when I turn bluetooth off and then on again before I make the second call, it works well again.
I even found out when I hear nothing during call and I turn bluetooth off and on it works all again.
Conclusion is. If I turn bluetooth off and on after each call I can use it.
I found a app in the playstore "bluetooth on call". This app automatically turns bluetooth off after a call en turns it on when you make a new call.
So for me it works this way

Related

Polaris bluetooth mute issues

I didn't want to open yet another Polaris bluetooth problems but none were like mine.
I have the O2 Orbit 2 and I had bluetooth mute problems which were usually resolved with soft reset, I think that ever since I installed HTC's official bluetooth mute fix the mute problems got worse.
Every couple of calls or when I plug something to the mini usb (ear phone, charging, data, etc') my bluetooth is muted, the connection is established and I think I do hear through it but with extremely low volume (less then a whisper, more like back ground noise) the mute almost never fixes itself, it goes on even if I flash with a different ROM!!, what fixes it is playing with turning on and off the connection to the headset while in call or, while in call pluging and removing the wired headset, once it's back, it usually stays ok until (randomly) when I plug something to the usb, at first I though it will never work again (flashing something like 10 different roms...) but this fix is less then convenient, again, sadly the official fix doesn't help.
Anyone knows the return policy to O2 from Germany? I live at Israel so I think it might be a problem...
Same problem for me.
After the original fix, my bluetooth headset is always mute.
I have ordered a new original HTC M200 headset. I hope it will work............
Original M200 arrived today.
Don't work. Always mute.
I have tried to uninstall the original fix without any resultate.
Did you get yours to work?
You can try the on/off trick, I usually call my voicemail when the mute starts and then goto options and turn handsfree off, then again turn it on, sometimes it works after 4-5 tries sometimes after 2-3 minutes...
Sometimes the voice comes back in slow motion!!, I thought at first that it was garbled, but once I have a voice mail of a woman who talked fast so when the voice came back in slow motion she sounded like a very low voice slow talking man.
no, don't work on any headset......
It's a hardware problem ??
Hey guys...just wondering if you guys found a solution to this problem. I have this problem with my touch pro. The A2DP works, but for some reason handsfree through bluetooth is muted and I can't unmute. Hope you guys found a fix and can help me out.

Topaz + BT hands free (Sony MEX-BT2500)

Hi there,
Can anyone help me solve this problem:
Ik have a Sony car radio with a BT hands free function (MEX-BT2500) in my car. When I make a call, the radio stops and I can speak hands free, hearing the conversation on the car-speakers. All nice, like it should be.
Problem is when I receive a call. The radio stops and I hear a ringtone (not my phone-tone though ). When I awnser the call, the caller can hear me, but I can't hear him, unless I take the phone in my hand and put it on my ear. The sound doesn't come through the car-speakers. So an incoming call can't be awnsered handsfree.
With my former phone (nokia 6230), it was no problem. Anyone knows how to solve this?
If it was the same as my problem, turn up the volume on the phone
My phone was the exact same, for some reason when it connected it was turning the volume right down!
Hope yours as as simple
todd69 said:
If it was the same as my problem, turn up the volume on the phone
My phone was the exact same, for some reason when it connected it was turning the volume right down!
Hope yours as as simple
Click to expand...
Click to collapse
Unfortunately my problem is not that simple. I got an incoming call yesterday when I was driving, but again no sound. When I called back, there were no problems. Does anyone else have a solution?
Well, I don't have the Sony-stereo, but I've got a Pioneer with BT. I have bumped into several issues with it, and the solution is the same every time:
-first, if you have a settings-option called something like "reset BT-memory", try that one, and pair phone again.
-If that doesn't work, next step is full reset of the stereo, meaning you pull it out and disconnect the power. Then plug it back in, and re-pair phone.
This at least did the trick for me, now voice-dial works perfectly, and I even have "BT Audio", meaning I can play my Topaz' music on my carstereo without hassle.
Could also be something else simple, you are using the stereo to answer and not the handset?
If I answer using the phone with my stereo then I get the same issue as you, answer using the stereo and all is well

[Q] Sound disappears from BT-Headset and goes (routes) to the phone while calling

Hello. Sorry my English.
Hardware: Samsung Galaxy S5 Duos (KitKat 4.4.2 ANJ1 stock rooted), Plantronics Voyager Bluetooth Headset, Jabra Clear BT Headset. From november 2014 to may 2015 all was great, but suddenly I got a problem with the BT on my phone.
The problem is: in outcoming call: 1) I dial a number and begin a call 2) the call's sounds routed to a headset 3) When I hear "Allo" , the sound in headset suddenly goes to a phone's voice speakerphone, and BT-headset loses sound 4) sometimes sound and voice goes to phone while dialing a number or after some words from my friend that I called. The problem occurs completely at random, it can happen on the 1st time I dial or the 10th time, for example, or just every call. In incoming calls: 1) I receive a call with BT-Headset (push a button on it), firstly voice comes to BT-Headset, but it can disappears after some words from me or my friend.
When the sound disappears, I find that the BT-connection stays alive , and my S5 obeys the headset buttons commands (when I pressed the button on headset, the call disconnects. So, Galaxy S5 obeys the command from BT-Headset and BT connection stays alive while calling, but sound may disappears suddenly, and I must take my phone to the ear to complete a call. Both mic and voice sound goes from BT-headset to the phone's speakerphone. But I finde a feature: After sound disappears - when I double pressed the BT-button in the call window (off and on again bluetooth audio call channel), the sound brings back to the headset!!! So, I think, that the call app loses the sound from BT-Headset and suddenly routes it to the phone, but why?
I used a stock ANJ1 rooted for 6 month ago and had no problem, my apps setup didn't change for 6 month I owned a phone. Something happens, but what? How can I trace or parse the app that causes this problem? I think, one app from my setup trying to control the voice, so it disappears. Any suggestion?
What I tried: wipe phone and write the ANJ1 from Odin (BT works on the stock without apps), after this I bring back my backups from Titanium Backup (just user apps and data). I have Smart Booster and AFWall+ (android firewall - with my own rules), and have the EnhancedSMS and Caller ID. Freezes AFWall+ and SmartBooster - no changes, sound disappears. Any saggestions, please?

S7 Edge - Microphone not working in calls

Please help,
Samsung have returned my phone twice saying no fault found, but every time I make or receive a call there is no sound on the other end. The mic works for google search, video recording, voice recorder app etc, but as soon as I make a call no one can hear me at all. Any ideas welcome please before I end up selling it as faulty. Gutted and tearing my hair out!
Hey!
I have a similar issue with my S7. Microphone does not work only during the calls. Turning on speakerphone does not help (as it should when you have a broken bottom microphone) and also if I connect headset then the microphone from the headset works. In all other aps both (botom, top) microphones work (I do have stereo in video recording etc.). Did it happen to you after system update or when?
Cheers
A small update:
I have found that the issue is even more silly for me.
So I make a call and the person to whom I am calling cannot hear me. Then I connect a headphones, but ones without a microphone. And suddenly the microphone in the phone starts working. But the moment I disconnect them it stops.
Can you confirm this happening for you?
its old, but i have same problem. Now, I am trying to flash stock rom and see if it will work. After restart, I microphone works only once in call app, that it dont work. But i can record audio with it and in any other app it works. Idk what is the problem, but i want to find out

When i call someone (or call me), he cannot listen me!

When i call someone (or call me), he cannot listen me!
I thing that i have this problem after using of sound recording.
I need to restart the smartphone to resolve the problem.
Any idea?
Cyanogen OS 13.1.5-znh2kas7ec-kipper
CyanogenMod API level: Elderberry
Hi.
It might not help, but I've got a very similar problem.
My car has integrated Bluetooth.
As soon as I get in the car, then get out again (with the Bluetooth being connected), then I "lose" the microphone.
If I make/receive a call, the person on the other end can't hear me. Voice recording app shows no microphone activity.
If I turn Bluetooth off, the microphone starts working again.
As far as I know, this has only started happening since the most recent Wileyfox update.
Hope this helps.
Pete.

Categories

Resources