This is latest KK flashable zip via CWM over jelly bean, so don't worry if you can't download FOTA, just flash cwm recovery on your JB and flash this, You can also flash it if you are already on FOTA KK just in case you messed it up by deleting some system file, in other words, it's a stock KK rom flashable on both stock JB and stock KK[-fota only] :victory:
INSTRUCTIONS TO FLASH CWM-
1.See my ROOT MODS EVERYTHING THREAD
2.See CWM recovery for JB in recovery secion here :fingers-crossed:
REMOVED APPLICATIONS-
1.Frog Burst
2.Crome
3.Google Maps
4.Google Drive
5.Hangouts
6.Youtube
7.Fukrey Run
INSTRUCTION TO FLASH ROM-
1.You must have CWM, as I said above
2.If you have already flashed CWM then only proceed
3.Place ROM in your sdcard
4.Wipe data/factory reset
5.Wipe dalvik cache
6.Flash ROM from sdcard
7.Reboot and enjoy
DOWNLOAD-
MEDIAFIRE
I was not able to flash FOTA...AND u made it very easier.
I will flash it tomorrow.
U won my heart...
And One question, is it pre rooted.?
Sent from my Micromax A120 using XDA Premium 4 mobile app
Have you deodexed this?
umangleekha said:
This is latest KK flashable zip via CWM over jelly bean, so don't worry if you can't download FOTA, just flash cwm recovery on your JB and flash this, You can also flash it if you are already on FOTA KK just in case you messed it up by deleting some system file, in other words, it's a stock KK rom flashable on both stock JB and stock KK[-fota only] :victory:
INSTRUCTIONS TO FLASH CWM-
1.See my ROOT MODS EVERYTHING THREAD
2.See CWM recovery for JB in recovery secion here :fingers-crossed:
REMOVED APPLICATIONS-
1.Frog Burst
2.Crome
3.Google Maps
4.Google Drive
5.Hangouts
6.Youtube
7.Fukrey Run
INSTRUCTION TO FLASH ROM-
1.You must have CWM, as I said above
2.If you have already flashed CWM then only proceed
3.Place ROM in your sdcard
4.Wipe data/factory reset
5.Wipe dalvik cache
6.Flash ROM from sdcard
7.Reboot and enjoy
DOWNLOAD-
MEDIAFIRE
Click to expand...
Click to collapse
I Am Using Jellybean 4.2.2 c2c 8GB I am getting Update of kitkat from software update in about my phone is rooted And cwm is Installed ITs Safe?? Flash This Rom via CWM?
I m in stock kitkat version flashed via sp flash tools,(501mb file)
I want to try darkl or cleankat ROM
What I have to do shift to custom
Rom
Sent from my AO5510 using XDA Free mobile app
It freezed my phone
umangleekha said:
This is latest KK flashable zip via CWM over jelly bean, so don't worry if you can't download FOTA, just flash cwm recovery on your JB and flash this, You can also flash it if you are already on FOTA KK just in case you messed it up by deleting some system file, in other words, it's a stock KK rom flashable on both stock JB and stock KK[-fota only] :victory:
INSTRUCTIONS TO FLASH CWM-
1.See my ROOT MODS EVERYTHING THREAD
2.See CWM recovery for JB in recovery secion here :fingers-crossed:
REMOVED APPLICATIONS-
1.Frog Burst
2.Crome
3.Google Maps
4.Google Drive
5.Hangouts
6.Youtube
7.Fukrey Run
INSTRUCTION TO FLASH ROM-
1.You must have CWM, as I said above
2.If you have already flashed CWM then only proceed
3.Place ROM in your sdcard
4.Wipe data/factory reset
5.Wipe dalvik cache
6.Flash ROM from sdcard
7.Reboot and enjoy
DOWNLOAD-
MEDIAFIRE
Click to expand...
Click to collapse
Hey, flashing this rom soft bricked my phone when i rebooted for the second time, so i had to restore back to JB. But then i again installed KK FOTA and before rebooting for the second time i flashed CleanKat into it. Its been working fine since then.
Related
Hey everybody .
I'm new with the Nexus 4 and I just rooted it . I'm currently running Android 4.3 .
and I would Like to istall the latest PA 3.92 , and I saw that there somethings called RADIO and Bootlaoder to Flash .
How to actually flash them ? just by the recovery or some other method ?
by WHAT order should I flash ? Rom first or Radio or Bootloader ?
Thanks . :good:
Cin0 said:
Hey everybody .
I'm new with the Nexus 4 and I just rooted it . I'm currently running Android 4.3 .
and I would Like to istall the latest PA 3.92 , and I saw that there somethings called RADIO and Bootlaoder to Flash .
How to actually flash them ? just by the recovery or some other method ?
by WHAT order should I flash ? Rom first or Radio or Bootloader ?
Thanks . :good:
Click to expand...
Click to collapse
If you are already running Android 4.3, you have the latest bootloader and radio installed. Make sure your battery is charged to at least 50%, perform a nandroid backup, and wipe cache and Dalvik cache. Next install ParanoidAndroid from the zip file, install the latest Gapps from the zip file, wipe cache and Dalvik cache, and reboot.
If you are not running Android 4.3, you should use Clockworkmod or TWRP to install the latest bootloader and radio from the zip files available from ParanoidAndroid before flashing the ParanoidAndroid ROM and Gapss.
BobWalker said:
If you are already running Android 4.3, you have the latest bootloader and radio installed. Make sure your battery is charged to at least 50%, perform a nandroid backup, and wipe cache and Dalvik cache. Next install ParanoidAndroid from the zip file, install the latest Gapps from the zip file, wipe cache and Dalvik cache, and reboot.
If you are not running Android 4.3, you should use Clockworkmod or TWRP to install the latest bootloader and radio from the zip files available from ParanoidAndroid before flashing the ParanoidAndroid ROM and Gapss.
Click to expand...
Click to collapse
Ok Thank you ! :good::good:
I Did the normal OTA update (Ofiicial 4.3) So I have the latest Radio and bootloader is that Right . and I'm good to go flash the PA 3.92 .
Cin0 said:
Ok Thank you ! :good::good:
I Did the normal OTA update (Ofiicial 4.3) So I have the latest Radio and bootloader is that Right . and I'm good to go flash the PA 3.92 .
Click to expand...
Click to collapse
That's right: The OTA installs the .84 radio and makoz20i bootloader, so you are ready to flash ParanoidAndroid 3.92 and Gapps for Android 4.3.
Thanks
Thank You :good::good:
I'm currently running CM10.2 by Engle_Mars but I would like to try MS2Ginger 5. ( http://forum.xda-developers.com/showthread.php?t=1931968 )
I've read the thread but can't really find some concrete information as to the installation steps. Do I need to install both the rom and the kernel listed in that thread?
I have the latest kernel: SPKernelR6+UP.7z (16.05 - New Revision! <Rev6>) and the v5 Rom.
In cm10.2 Do I just reboot to recovery, install the kernel, install the rom, wipe data/cache, reboot?
Thanks.
norgar00 said:
I'm currently running CM10.2 by Engle_Mars but I would like to try MS2Ginger 5. ( http://forum.xda-developers.com/showthread.php?t=1931968 )
I've read the thread but can't really find some concrete information as to the installation steps. Do I need to install both the rom and the kernel listed in that thread?
I have the latest kernel: SPKernelR6+UP.7z (16.05 - New Revision! <Rev6>) and the v5 Rom.
In cm10.2 Do I just reboot to recovery, install the kernel, install the rom, wipe data/cache, reboot?
Thanks.
Click to expand...
Click to collapse
You dont need to install kernel from MSGinger thread. It is working with stock one without any problem
0. Extract rom to /sdcard/clockworkmod/backup
1. you must format data and cache to ext3 - you can do that from bootmenu
2. boot to recovery and flash this recovery: http://www.mediafire.com/?i1rcie7tf4y6rmu
because CM10.2 has TWRP recovery and it cant recover CWM nandroid backups
3. Boot to CWM based Recovery.
4. Restore the ROM.
5. Reboot , boot again to CWM
6. Now Wipe Data & Cache.
Thank you!
Hi everyone,
I'm planning on upgrading my Nexus 4 to KitKat.
Currently I'm using PA 3.69 (4.2.2) with Franco Kernel and CWM Recovery.
1. What files do I need to flash for the upgrade, possibly with links? (I'm going for Purity ROM)
2. In what order should I do the flashing process?
3. Should I upgrade CWM before flashing, and if yes, which is the latest version that supports 4.4 and how does upgrading work?
Thanks in advance
If you want to install stock KK, you can download the factory Occam images and install via fastboot.
If you want to install a custom rom, you may need to update your recovery to the latest version and flash a KK rom that includes an updated radio and boot img.
So you think I can:
1. Upgrade CWM to 6.0.4.5 here: http://forum.xda-developers.com/showthread.php?t=2198942
2. Flash this: http://forum.xda-developers.com/showthread.php?t=2545838, since it includes Bootloader and Radio.
3. Flash this: http://forum.xda-developers.com/showthread.php?t=2281607 (Purity ROM)
4. Flash any desired Kernel (e.g. Franco) and use Titanium backup to restore my apps?
U just have to download the Rom. Install it. Set it up. Then boot back into recovery and install the kernel
I don't think u have to update CWM. So just steps 3 and 4
I'm asking cause I am coming from 4.2.2 with old radio and bootloader and I want the most up-to-date ones.
And I am sure that just flashing the rom will cause problems... What do I need to wipe prior to flashing?
BarbaxX said:
I'm asking cause I am coming from 4.2.2 with old radio and bootloader and I want the most up-to-date ones.
And I am sure that just flashing the rom will cause problems... What do I need to wipe prior to flashing?
Click to expand...
Click to collapse
I checked the links. Your method seems to be OK.
As for wiping, you need to wipe data, cache and dalvik cache from the recovery when you flash the Purity Rom
Everything has worked flawlessly. Thanks!
This is XOLO KITKAT ROM for our A120 ported by me from Q1011, you can try it to experience xolo power and secure apps, camera is also different, you can hit thanks if you like my works :victory:
You must flash Rio's Kitkat OR Stock kitkat with spflash tools before trying my ROM, then you must flash CTR recovery attached below using sptools
RIO'S KITKAT- Flash with sptools
STOCK KITKAT- Flash with sptools(replace recovery with the one attached below)
INSTRUCTIONS TO FLASH CTR-
1.Download recovery.img from below, replace the recovery in KK SP files with this one
2.In sptools, select scatter file, then untick everything below except recovery
3.Click downlaod
4.Now you have sucessfully updated your recovery :fingers-crossed:
ROM FEATURES-
1.Working xolo power saver app and secure app
2.Camera quality better than mmx
3.No funky mmx store icon on lock screen
4.Kernel is same as stock mmx
5.Xolo bootanimation and launcher
6.Longpress home is recents
7.No file manager delete/copy bugs
8.Much lighter and cleaner than stock, 207mb only :victory:
INSTRUCTION TO FLASH ROM-
1.You must have installed stock KK/RIO KK and CTR, as I said above
2.If you are already on stock/RIO KK, just flash CTR
3.If you have already flashed CTR then only proceed
4.Place ROM in your sdcard
5.Wipe data/factory reset
6.Wipe dalvik cache
7.Flash ROM from sdcard
8.Flash root zip attached below
9.Reboot and enjoy
DOWNLOAD-
http://www.mediafire.com/?hxd3fi19a57s519
screenshots please
Please add screenshots! Thanks
I have installed Twrp recovery since long time. Now i want to flash KK custom roms but in many KK roms required CWM recovery. So plz help me how can i downgrade Twrp to CWM recovery.
D TheThWr said:
I have installed Twrp recovery since long time. Now i want to flash KK custom roms but in many KK roms required CWM recovery. So plz help me how can i downgrade Twrp to CWM recovery.
Click to expand...
Click to collapse
Download cwm IMG file. Gobto twrp itself. There install go. U have to change zip file install to image file install option. Select that cwm IMG. Flash. Reboot to cwm. But this will happen for KitKat baserom. I think so....
So pls use base switcher of lollipop to KitKat then do dis
Bro i don't have Base roms. I used Nougat Roms.