Database Users

[REF] HowTo Install a Custom ROM on Liquid

New(bie) here ?
You just have received your liquid, and would like to install a custom rom, but don't know where to begin ? This is for you.
(Note : Mostly inspired from the LCR's wiki page : http://code.google.com/p/acer-liqui...cker/wiki/HowToRootAndFlashLiquidCommunityROM)
Tools Needed :
- Acer Liquid drivers : http://www.megaupload.com/?d=E5PTHL3O
- Acer Flash Tool : http://www.megaupload.com/?d=EF2QNANO
- SuperBoot : http://acer-liquid-community-rom-bugtracker.googlecode.com/files/Superboot.zip
Extract all in separates folders.
1. Install an official BIN
The first thing to do, is to get the latest official 2.1 bin for Liquid. Well, it's not really official as they are leaked bin for the moment, and not yet available on the Acer's website.
Acer_LiquidE_1.100.05_EMEA_GEN1 --> European Version.
Alternatives mirrors : LCR's wiki page
Acer_LiquidE_1.100.15_AAP_FET --> Only contain English + Asiat langs.
Once your bin downloaded :
1) Unpack the drivers.
If you have a 32-Bit version of Windows, go to the folder x86, if you have a 64-Bit version, go to the x64 folder.
Then run the setup.exe and follow the instructions.
2) Unpack the Acer A1 Tool.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Important : under windows Vista / 7 : choose Windows XP compatibility mode and "run as administrator"
Run the ACER Download Tool. Click "Browse" and select the downloaded ACER_LiquidE...bin. Attach your Acer Liquid and press Start. It should start flashing the stock Éclair image.
Don't interrupt this process!! In case of communication error during flash process. You can unplug and replug usb, don't power off the phone.
You now have a standard 2.1 rom. But, even if you just want to run the stock rom without a custom rom beside, you should install a recovery software, in case of problems.
A custom recovery is program software which will help you install customs roms, root your roms, backup and restore a rom, etc... This is the start point to custom Liquid rom.
2. Install a Custom Recovery Image
1.) To do this, go here : http://code.google.com/p/acer-liquid-malez-recovery/ and download malezRecovery_0.5.3.img (or newer version if there is one off course).
2.) Put this image in your extracted Superboot folder, delete the old recovery.img in it, and rename malezRecovery_0.5.3.img to recovery.img
3.) Enable USB Debug in your phone --> Settings --> Applications --> USB Debug.
4.) Run install-recovery-windows.bat to install the recovery.
You should see something like this : sending 'recovery' (4876 KB)... OKAY writing 'recovery'... OKAY
5. After the flash, your phone should reboot.
6. To enter the recovery, use reboot-recovery.bat
To know more information about it,go to the malezRecovery project page.
3. Install a Custom ROM
1. To install a custom rom, just download the zip file, put it on your sd, then reboot on recovery (You can download QuickBoot from the market to reboot in recovery easily, but your rom have to be rooted).
2. Chosse Wipe Data (This will do a factory reset, please backup before if you need it).
3. Navigate to "flash/test menu" / "apply any .zip from SD" and push the menu key, and then choose the ROM and press menu again. Press home to start flashing
4. Wait for the installation to finish.
5. Reboot
6. You're done

please help my.am. I followed all the steps to install-recovery-windows.dupa I did that, could not turn on the phone, nor can it bring en recovery mode

Thanks alot
it really helped......

Thx.. it's very usefully..

kidoucorp said:
1. To install a custom rom, just download the zip file, put it on your sd, then reboot on recovery (You can download QuickBoot from the market to reboot in recovery easily, but your rom have to be rooted).
Click to expand...
Click to collapse
Dont understand this part, the reboot to recovery.bat or reboot-recovery-windows.bat (in Superboot folder) wont let me in the recovery mode to browse for the zip file in the SD card, actually those files wont execute
There is nothing like "Wipe Data" as you said

Ok that's fine now, I need to move the newest img file to superboot folder instead of using the exe tool provided here
http://code.google.com/p/acer-liqui...tail?name=installMalezRecovery_0.5.4_FULL.exe

OK, so from now on everytime I want to install a custom ROM, the first thing I need to do is flashing the OFFICIAL Acer Rom again and then following step 2 and 3?

No, from now you can just flash the .zip without reflashing the bin each time.
Some roms are based on a certain BIN version, so it's better to flash the bin they advise to get the rom working as it should.
If you already have the bin version advised, you don't need to flash the bin again, maybe a "Wipe data" before flashing the new zip is all needed

kidoucorp said:
No, from now you can just flash the .zip without reflashing the bin each time.
Some roms are based on a certain BIN version, so it's better to flash the bin they advise to get the rom working as it should.
If you already have the bin version advised, you don't need to flash the bin again, maybe a "Wipe data" before flashing the new zip is all needed
Click to expand...
Click to collapse
yes, but now I can not access the Recovery mode anymore, when I double click the reboot-recovery-windows.bat (superboot) or reboot to recovery.bat (Malez), the phone restarts with Acer logo and then a black screen, sometimes Acer logo without back-light, and I have to remove the battery to restart again

Go to the Market and download an app called Quickboot. It allows you to reboot into Recovery without a computer.
If that does not work:
-Make sure there is no file named "update.zip" on your SD Card
-Remove and replace battery
-Hold down Power+Volume Down+Camera. Phone should vibrate 3-4 times
-Hold down Power+Camera
-Phone will reboot into Recovery

I have the same sort of problem. Rooted with recovery and installed a new ROM but then in reboot i get the splash page but then just a black screen. Tried a couple of ROM's but all the same result?
Just really want to get my CUS2 Donut version up to eclair....
Please help!
[update]
Ok, so i finally understand what went wrong. The acer support section wasn't that clear for me. Now just grabbed the 2.1 CUS2 bin from the liquid e section and that solved the problem! Now running eclair with Malez Recovery and ready for some custom ROM's
[update 2]
So i also found out that i can forget the CUS2 bin story. That's only when using official acer updates. With the ACER Download Tool [Single] i've now managed to install the leaked alpha version of froyo!

htc desire user.......
Hi
I m htc desire user n my friend is buying liquid e ferrari edition but he want me to get sense rom on it he doesnt like d stock acer eclair rom,
So is it possible to install cooked SENSE roms on this phone ??

[GUIDE] Perka´s And flip360´s Clean Install Guide And Package

Perka´s And flip360´s Clean Install Guide And Package.
Warning!
If you do not follow the guide exactly you might brick your phone!
This guide is only for Samsung Galaxy S GT-I9000
If you do not know what 3 button combo or recovery is, read this please.
If you have Captivate Here you have a guide.
We are not responsible for bricking anybody’s phone!
If it happens we will try to help you, but remember we are doing this for free!
You do not have to do all Sections, please read what each Section is for.
IMPORTANT! – You need to read the guide before doing it, and use the files provided.
​
Section A If you have 2.1, 2.2, 2.2.1
Section B is for flashing stock 2.1, to get a fresh clean install.
Section C is for flashing our update.zip from 2:e recovery (It is a renamed Kitchen Rom) Log here.
Section D Another way to get to Kitchen Rom from stock 2.1 with 2e recovery, does not work with Stock Froyo 2.2 or 2.2.1.
Section E is a guide to Magical Rom Kitchen.
Section F is a How to CWM update.zip guide, (to get CWM, only works in 2e recovery 2.1 Eclair)
​
Before you begin with the flashing process, make sure that you:
Samsung drivers installed on your computer.
Have backups.(When you restore your backups, DO NOT restore system settings.)
Do not have any lag fix applied.(If you are going to flash stock with pit, no need to disable lag fix)
Phone battery is fully charged.
You don´t have Kies running.
We strongly urge you to read through the whole guide first before attempting any of this,
and sticking to our reference, here is the files that you will need before attempting to flash your Samsung Galaxy S GT-I9000.
​
Download Section.
Odin v 1.3
Samsung USB Drivers.
Driver x64
Driver x86
For Section A
Speedmod Kernel K13b
For Section B
GT-I9000_I9000XWJM8_I9000XXJM4_CODE-MODEM_Odin_Csc_Pit.512.zip
or
GT-I9000_I9000XWJM9_I9000XXJM4_CODE-MODEM_Odin_Csc_Pit.512.zip
For Section C
The renamed Kitchen Rom (update.zip) Log file This is used if you get stuck on GT screen.
For Section D
Z4Root
Sgs Kernel Flasher
Speedmod Kernel choose the CWM.
Qr codes in Post 2
For Section E
Cook your favourite Kitchen Rom in Magical ROM Kitchen
For Section F
ClockWorkMode update.zip
​
Preparations
To begin with, download and extract all these files mentioned above to a convenient location, preferably on your desktop. Once you have all the files in place, launch Odin as administrator. On your device end, make sure that you have disabled any lag fix, if applied earlier.
Ensure that the drivers for your SGS are installed on your computer.
If you have Kies already installed on your machine, the drivers are already in place. If Kies is running shut it down.
Power off your phone.
Put your Galaxy S in download mode by pressing and holding the Volume Down + Home + Power keys at the same time.
You will see a yellow symbol and the words ‘Downloading’ once the phone has gone into download mode. That’s it, we’re ready to begin the flashing sequence.
​
Section A
Before flashing the Speedmod Kernel, put your Kitchen Rom on your internal sd card.
Flashing a Speedmod Kernel Guide here.
When flashing on 2.1, you get stuck on GT-screen, dont worry its normal, just pull battery and enter recovery.
Now go to Section E
​
Section B
Flashing stock firmware
Make sure you don´t have Kies running, and your phone is off, do not connect it now.
1.Start Odin
2.In PIT, load the 512.PIT file.
3.For PDA, select the CODE file.
4.For PHONE, select the MODEM file.
5.For CSC select the CSC file.
6.Make sure that the Re-partition box is checked.
7.Put your phone in download mode. (Volume down + power button + home button )
8.Connect your phone to your PC via the USB cable. It will install the drivers, or if they are already installed, you will see ‘Added’ in Odin’s message box . A COM port will also become visible.
9.Again make sure that all the selections in Odin’s interface are correct. Press the Start button when verified.
The flashing sequence will begin, and you will see several messages in Odin. Make sure that the phone does not disconnect during this time, as it may brick your device permanently. Once the flashing sequence has completed, Odin will give a ‘Completed’ message in the Message box, and a green PASS will appear on top.
Your device will automatically reboot at this point.
Congratulations! You have successfully completed stage one of the process, and now you’re running the XWJM8 or JM9 2.1 Éclair firmware.
Section A is useful if you just want to revert back to factory stock 2.1 (warranty, repairs, etc.)
Now you can do Section A ,D or F
​
Section C
Flashing the update.zip, this is used if you have problems installing your Kitchen Rom
Copy the update.zip (it is a renamed Kitchen Rom Log) to your Internal Sd card.
Shut off the phone and reboot to recovery (Volume UP + Home + Power) and do a FACTORY RESET.
Then choose Install update.zip from the recovery, let it install and reboot. When the phone has booted, shut the phone off and enter recovery (Volume UP + Home + Power) and then choose Install update.zip from the recovery, let it install and reboot.
It´s not a typo you need to do it twice.
All done! Now you have a basic Kitchen Rom containing CWM and all you need to flash a custom ROM.
If you want to stay with this Rom, you can enter the Magical ROM Kitchen and make a update.zip with the apps you want to add, and flash it in cwm. If you want to uninstall something you can do it with Titanium.
Now you can go to Section E
​
Section D
Another way to get to Kitchen Rom from stock 2.1 with 2e recovery, does not work with Stock Froyo 2.2 or 2.2.1.
When you have the apps and the Kernel needed for this Section,
1.Install the apps.
2.Cook your Kitchen Rom and put it on your internal sd card. (see section E how to do that)
3.If you did not download the kernel with your phone,(qr codes in post 2) put it on your internal sd card.
4.Root with Z4Root.
5.Flash the Speedmod Kernel with Sgs Kernel Flasher (only v1.5.9 or newer)(Atm you will get stuck on GT screen due to mismatch between kernel/firmware versions if you try normal booting)
6.Enter recovery
7.Factory reset
8.Install zip from sd card
9.Choose zip from sd card
10.Install the Kitchen Rom
11.Reboot
​
Section E
Flashing a Kitchen Rom if/when you have clockworkmode
Here you have a app guide made by marcedli Xda
And here you have a nice Kitchen walk-trough with screens: Link.
This is the steps you need to do.
1.Place Kitchen Rom on internal sd card
2.Enter recovery
3.Factory reset (if you install new base Rom OR the previous Rom had a voodoo kernel AND you want to wipe)
4.Install zip from sd card
5.Choose zip from sd card
6.Install the Kitchen Rom
7.Reboot
​
Section F
How to get CWM with CWM update.zip (only works in 2e recovery 2.1 Eclair)
1.Place your Kitchen Rom on your internal sd card, that you generated in the Kitchen
2.Place the CWM update.zip on your internal sd card that you downloaded from download Section
3.Power down your phone and enter recovery (Volume up + power button + home button )
4.Choose apply sdcard:update.zip, now you will end up in recovery again, so choose apply sdcard:update.zip and you will have CWM.
5. Now go to Section E step nr 3.
​
If you still have any questions please log in to Kitchen`s Irc support channel. (in irc type !help)
Webchat!
​
Please rate or comment.
​
This guide was made and tested by,
flip360 Xda
Perka Xda
Beerfund
​​

Links and QR codes.
Do you need a file? Perka´s File Stash!
Black Android Theme by Pele78 (imo the best out there!)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you need help with modem, csc, and other stuff, please go to Doc´s Irc channel and type !help and you will find what you are looking for, Click this text.
Guide in PDF
Perka´s File Stash
Adobe Reader
Z4Root
Sgs Kernel Flasher
Speedmod Kernel
Credit Goes To The Doc Team!
Do you want free dropbox cloud space? Use this link to sign up and you get 2gig + 250mb space for free (and I get 250mb) Thx.

gday.. just to clarify...does this suggest therefore to flash back to jm8 2.1 prior to flashing to a Doc Rom??
i have asked this in another post, but say for example you are already running another ROM that comes with all the bells & whistles (eg cwm, optional lagfix, root, sgs tools themes etc)..
would the user need to go back to jm8?
cheers

skuzy said:
gday.. just to clarify...does this suggest therefore to flash back to jm8 2.1 prior to flashing to a Doc Rom??
i have asked this in another post, but say for example you are already running another ROM that comes with all the bells & whistles (eg cwm, optional lagfix, root, sgs tools themes etc)..
would the user need to go back to jm8?
cheers
Click to expand...
Click to collapse
If you have problems flashing, use this guide, if you already have cwm recovery and can flash custom roms you dont need to do this guide.

thanks for confirming.!

Can this be used to flash all modded CWM ROMs? I think so. You can check & modify the topic accordingly.

ragin said:
Can this be used to flash all modded CWM ROMs? I think so. You can check & modify the topic accordingly.
Click to expand...
Click to collapse
i think so. We will test this out and give feedback

flip360 said:
i think so. We will test this out and give feedback
Click to expand...
Click to collapse
You mention 502 pit. Did you mean 512 or 503?

ragin said:
You mention 502 pit. Did you mean 512 or 503?
Click to expand...
Click to collapse
yes 512pit file. sorry typo

Huh? Isn't Doc's rom a CWM Rom? You can't flash those as a update.zip can you?

snapper.fishes said:
Huh? Isn't Doc's rom a CWM Rom? You can't flash those as a update.zip can you?
Click to expand...
Click to collapse
Yes Doc`s rom is coupled with CWM yes, but stock 2.1 also. try it

There´s an update coming to you soon from me and flip360
Teaser
http://www.swedroid.se/forum/showthread.php?p=428217#post428217

Updated enjoy.

Sorry, but to quote DocRambone's words:
"Wrong Section to post".
Edit: Thread reported.

Nice guide, thanks!
Is it also valid if you want to upgrade from an older Froyo rom like Doc 6.0 ?
If you start directly from stage 2 beeing on a stock rom, you have recovery 3e which won't let you flash unsigned packages (like the renamed DocRom "update.zip".
Or as I missing something ?

-Loom- said:
Nice guide, thanks!
Is it also valid if you want to upgrade from an older 2.1 rom like Doc 6.0 ?
In Docs own installation guide he stated to install a clean JP9 base before, do the usual CWM install through update.zip etc ..
And if you start directly from stage 2 beeing on a stock rom, you have recovery 3e which won't let you flash unsigned packages (like the renamed DocRom "update.zip".
Or as I missing something ?
Click to expand...
Click to collapse
If you are on a Doc rom do stage 3.
2.1 has 2:e recovery so it can flash unsigned zips.
Does not work if you have 3e recovery.

Doc advised to install a clean JM9 base rom before upgrading to a romkitchen rom.
But in stage 3 you wrote to just install the kitchen rom from CWM. Regardless what DocRom was in use before ?

-Loom- said:
Doc advised to install a clean JM9 base rom before upgrading to a romkitchen rom.
But in stage 3 you wrote to just install the kitchen rom from CWM. Regardless what DocRom was in use before ?
Click to expand...
Click to collapse
yes my good man

flip360 said:
[FONT=Book Antiqua, serif]For Stage 2[/FONT]
[FONT=Book Antiqua, serif]The renamed Doc Rom [/FONT][FONT=Book Antiqua, serif](update.zip) [/FONT][FONT=Book Antiqua, serif]Log file[/FONT]
[FONT=Book Antiqua, serif]Samsung USB Drivers.[/FONT]
[FONT=Book Antiqua, serif]Driver x64[/FONT]
[FONT=Book Antiqua, serif]Driver x86[/FONT]
Click to expand...
Click to collapse
Got these drivers package ... But which one is used for my SGS on W7 x64 please ? It doesn't find it by istself ?

Wendigogo said:
Got these drivers package ... But which one is used for my SGS on W7 x64 please ? It doesn't find it by istself ?
Click to expand...
Click to collapse
the x64 one, i think it does throught win driver management.

Micromax Canvas Knight A350 Stock ROM OFFICIAL KITKAT

Thread Removed

>-MKG-< said:
Here is the Micromax Canvas Knight A350 Official Stock Firmware/Rom KITKAT :
LINK : https://drive.google.com/uc?id=0B9cSshs70JG0bjRyTWVCRU5LZ00
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Key Features
OS : Android Jelly bean 4.4.2
Screen Size : 12.7cms(5)
Camera Resolution : 16 MP AF (3456*4608) REAR, 8 MP(2448*3264) FF Front
Chip set : MT6592T
Processor : 2GHz Octacore
Battery Capacity : 2350mAh
Connectivity Options : Bluetooth 4.0/USB/Wi-Fi
Drivers:
https://www.adrive.com/public/uVCr85/Mobistel_Cynus_T1_Drivers_x86.exe
X64 Drivers : https://www.adrive.com/public/5mMCQJ/Micromax_A350_Drivers_x64.exe
https://www.adrive.com/public/TWKhBN/driver9401.rar
How to Flash :?
You can use https://www.adrive.com/public/tyrfC7/SP_Flash_Tool_v5.1348.00.rar
A. Install USB driver
B. Switch off the mobile.
The maximum downloading speed can be up to 921600bit/s when using USB-Serial cable.
The driver needs to be installed before using the USB cable.
1. computer eject hardware installation instruction and choose following item and then click’’next step’’.
2. click ‘’browser’’ and choose the driver saved path’’ USB VCOM-Driver’’ and then click confirm and next step".
Choose usb driver
3. USB driver is now installing.
4. Open software upgrading platform’’ SP_Flash_Tool_v5.1343.01
5. Click” Download Agent”，choose right MTK*ALLInOne*DA.bin file
6. Click Scatter/loading. Choose right MTXXXX_Android_scatter.txt file.
7. Click Download then connect the smartphone（keep close），would show yellow color processing bar. Eventually, show “download ok”. Upgrade finished.
Here is a Tutorial on how to use SP Flash Tool by DR_MOOSAVI : http://forum.xda-developers.com/show....php?t=1982587
And as always :
Use this at Your own Peril. I will not take any responsibility on whatever may happen with your Canvas Knight.
Click to expand...
Click to collapse
Why are you making a simple looking process too hard.
The simple process is to....
1.) Install the drivers. (make sure you keep your phone disconnected while installing from executable file)
2.) Start SP Flash tool and locate the scatter file. (Do not connect phone.)
3.) Select download only in droop down and click download. (Do not connect phone.)
4.) Switch off your phone. Make sure you switch it off completely as it will vibrate strongly when it will go off. (Do not connect phone.)
5.) Now finally it is the time to connect your phone. Connect you phone now
6.) You will see the process starting to download the flash to the phone.
7.) Wait for the process to finish and then start your phone.
Note: This process works best with x86 versions of windows as the drivers for the x64 versions do not detect this phone.
If possible use the tutorial on Windows 7 x86 only.
I have tested the kikat rom on this phone.
The only benefit of the rom was that it improved the camera quality. But this rom made the phone very slow. On 4.2.2 the Antutu score was 32520 while on Kikat the same score felt down to 23252.
The UI was very slow to use. So i switched back to 4.2.2 Stock.

Canvas Knight Kitkat CWM Recovery TWRP Recovery
Root in kitkat
Download links
1.) Recovery Image CWM
https://dl.dropboxusercontent.com/u/45270941/A350/recovery.img
2.) Recovery Image TWRP
http://goo.gl/K8Qcua
3.) Kitkat Rom download
http://goo.gl/Cp5zqR
4.) SP Flash Tool
https://dl.dropboxusercontent.com/u/45270941/A350/SP_Flash_Tool_v5.1348.00.rar
See the video to Update the Kitkat on your Knight. After that Go To CWM recovery and flash the Super SU zip and the phone will be rooted.
Press all three button all together to go to the Recovery mode and then press Volume UP+ to get the recovery.
5.) Super SU Zip download Link
http://goo.gl/lDKVFm
Enjoy the video and Reply back for more support or any problem.

Many thanks dear!!!!
rakesh.aggarwal said:
Canvas Knight Kitkat CWM Recovery TWRP Recovery
Root in kitkat
Download links
1.) Recovery Image CWM
https://dl.dropboxusercontent.com/u/45270941/A350/recovery.img
2.) Recovery Image TWRP
http://goo.gl/K8Qcua
3.) Kitkat Rom download
http://goo.gl/Cp5zqR
4.) SP Flash Tool
https://dl.dropboxusercontent.com/u/45270941/A350/SP_Flash_Tool_v5.1348.00.rar
See the video to Update the Kitkat on your Knight. After that Go To CWM recovery and flash the Super SU zip and the phone will be rooted.
Press all three button all together to go to the Recovery mode and then press Volume UP+ to get the recovery.
5.) Super SU Zip download Link
http://goo.gl/lDKVFm
Enjoy the video and Reply back for more support or any problem.
Click to expand...
Click to collapse
Many many thanks for the new updates!!!!

Please Hit thanks button if you like my stuff
Sent from my Micromax A350 using XDA Free mobile app

Please hit thanks as this motivate us to discover more
Sent from my Micromax A350 using XDA Free mobile app

Praful Pradhan said:
Many many thanks for the new updates!!!!
Click to expand...
Click to collapse
Thanks for watching
Sent from my Micromax A350 using XDA Premium HD app

MIUI Jelly Bean for Knight A350
Guys there is a Good News for everyone that the MIUI has been ported for Canvas Knight A350 and this is working fine with my phone.
http://tinyurl.com/MIUI4Knight
Procedure:
1. Make sure you have Jellybean Installed on the device. If not then install the JB on the device.
2. If you have installed JB just now then start the device and go through the setup.
3. Make sure you have CWM based recovery. If you do then go to the CWM recovery and
i. Wipe Cache​ii. Wipe Dalvik Cache​iii. Wipe DATA/Factory Reset​4. Flash the MIUI rom and then restart the phone.
If you have Any problems then please reply here on the thread. I am using the MIUI for a long time on Knight and I am very happy from the results. I will be more then happy to help you if you find any problems.
Hit Thanks if you find this helpful.

Moto G2 XT1068 OFFICIAL Marshmellow 6.0 Stock ROM Backup with TWRP v3.3.1-0

Moto G2 XT1068 OFFICIAL Marshmellow 6.0 Stock ROM Backup with TWRP v3.3.1-0 + New BootLoader v48.87
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Description
View attachment 4025737
View attachment 4025738​
What's Working
. Everything!
What's Not Working
. You tell me!
Instructions All Links NO Mirror Plz....
Update Ur Moto G2-XT1068 BootLoader Version 48.87 + Latest Modem Flashing Through PC
1. This will only update your Bootloader and Modem. Your System and Recovery won't be touched.....
2. Download & Install Motorola device manager 2.5.4.exe for correct Usb drivers (choose repair if already installed) LINK
3. Download & Extract it to PC LINK
4. Switch off the phone, after that press & hold [Volume Down & Power Button] release after 5 seconds now ur Bootloader Screen will appear
5. Connect phone to PC , Now will see "USB Connected" on ur phone Bootloader Screen.
6. Open the Folder
7. Click / Open install.bat...........thats it.
FLASHING TWRP
1. Download & Install Motorola device manager 2.5.4.exe for correct Usb drivers (choose repair if already installed) LINK
2. Download TWRP Recovery LINK
3. Download & Extract Fastboot + ADB Folder LINK
4. Copy the TWRP Recovery file inside Fastboot + ADB Folder.
5. Switch off the phone, after that press & hold [Volume Down & Power Button] release after 5 seconds now ur Bootloader Screen will appear
6. Connect phone to PC , Now will see "USB Connected" on ur phone Bootloader Screen.
7. Go inside the Fastboot + ADB Folder Hold "Shift" key & right click inside the folder & click on "Open Command Window Here".
8. Type "fastboot flash recovery TWRP v3.3.1-0 titan.img" & press "Enter" Key.
9. After flashing is complete, Disconnect your Phone.
10. Use Volume Down to scroll to Recovery Option & then press Volume Up to Select Recovery to boot into TWRP Recovery
11. Now u have successfully flashed TWRP Recovery in ur Phone
RESTORE TWRP BACK FILES : [keep phone charge above 70%]
1. After flashing TWRP completely
2. Download TWRP Backup file MEGA LINK
3. Extract in PC then COPY the file in SD Card
4. Go to Recovery by sliding "Swipe to Allow Modification"
5. click on "Wipe" then "advanced wipe"
6. then select [Dalvik/ART Cache,Data,Internal Storage,Cache,System] after that swipe to wipe then click on home button
7. after that select Restore then click on Select Storage
8. select MicroSD Card then press OK now u will see a folder of M Stock ROM TWRP..........click on it
9. after that u will see two option selected then select swipe to RESTORE
10. after that click on Reboot System
11. NOW Reboot will take 10 to 15 min.
Reversed Audio Channel Issue
1. Those who are facing Reversed Audio Channel Issue follow this Guide Others just Ignore it if u r not facing any problem
2. Download the file then extract it and open READ ME file LINK
How to Root
1. Download and Flash Magisk v20.3 from TWRP LINK
2. Install as apk after flashing (Magisk.zip) Magisk Manager v7.5.1 = LINK
Version Information
BootLoader Version : 48.87
Build Number : MPB24.65-34-3
System Version : 24.81.3.titan_retaildsds.retaildsdsall.en.03 retin
ROM OS Version: 6.0 Marshmallow
Based On: Stock Marshmellow Motorola OS
Status: Stable

Enable Multi Window In Stock ROM
1. Just edit build prop file with build prop tweaker as in pic
2. Change build prop edit ro.build.type from 'user' to 'userdebug'

Reserved

it's the final version of marshmallow or the soak from january? How it's working with fb, messenger and chrome? thanks

ditoparlo said:
it's the final version of marshmallow or the soak from january? How it's working with fb, messenger and chrome? thanks
Click to expand...
Click to collapse
yes its Final Version.......

gourabpa said:
yes its Final Version.......
Click to expand...
Click to collapse
tried to restore but selecting my sd card doesn't show the folder twrp. It shows nothing

ditoparlo said:
tried to restore but selecting my sd card doesn't show the folder twrp. It shows nothing
Click to expand...
Click to collapse
1st Open TWRP then connect ur phone into PC copy the folder in sd card then reboot TWRP rECOVERY NOW IT WILL SHOW

i have already installed twrp version 2.8.6.0
will it overwrite it and install 3.0.0.0 instead of 2.8.6.0

please provide a google drive link for the os plzzzzzzzzz
is it different from soak test zip??
i am on soak test zip of mm... installing with mentioned method is ok?

gourabpa said:
roooooot
Click to expand...
Click to collapse
have you tried to root official build >??????
yes or no ???????
if yes than tell is it working or not !!?

shubham1358 said:
i have already installed twrp version 2.8.6.0
will it overwrite it and install 3.0.0.0 instead of 2.8.6.0
Click to expand...
Click to collapse
if u flash through PC then old version will be deleted and instead of new version will take its place.....so dont worry at all
instruction r given above

jkorade said:
please provide a google drive link for the os plzzzzzzzzz
is it different from soak test zip??
i am on soak test zip of mm... installing with mentioned method is ok?
Click to expand...
Click to collapse
i dont about SOAK test but this is OFFICIAL FINAL Build........
yes it will work with the mentioned method above

gourabpa said:
enable multi window in stock rom
1. Just edit build prop file with build prop tweaker as in pic
2. Change build prop edit ro.build.type from 'user' to 'userdebug'
if u dont understand clearly then then video guide is here link
Click to expand...
Click to collapse
bro give me some credits it's my video link
thank's in advanvce
---------- Post added at 05:23 PM ---------- Previous post was at 05:09 PM ----------
gourabpa said:
OFFICIAL PURE FINAL Build Moto G Indian XT1068 Marshmellow 6.0 Stock ROM Backup with TWRP v3.0.0.0
FLASHING TWRP
1. Download & Install Motorola device manager 2.5.4.exe for correct Usb drivers (choose repair if already installed) LINK
2. Download TWRP Recovery Uploaded View attachment 3642705
3. Extract the file and 1st READ Flashing Method given inside the folder
RESTORE TWRP BACK FILES [keep phone charge above 70%]
1. After flashing TWRP completely
2. Download TWRP Backup file via MEGA LINK
3. Extract in PC then COPY the file in SD Card
4. Go to Recovery by sliding "Swipe to Allow Modification"
5. click on "Wipe" then "advanced wipe"
6. then select [Dalvik/ART Cache,Data,Internal Storage,Cache,System] after that swipe to wipe then click on home button
7. after that select Restore then click on Select Storage
8. select MicroSD Card then press OK now u will see a folder of M Stock ROM TWRP..........click on it
9. after that u will see two option selected then select swipe to RESTORE
10. after that click on Reboot System
11. NOW Reboot will take 9 to 10 min.
How to Root
1. Don't flash SuperSU from recovery, it will cause bootloop!
2. Connect your phone in Bootloader mode to PC
3. Download the modified file uploaded View attachment 3642838
4. Extract the file after that open the folder and Run the ROOT.bat file
5. Reboot your phone
6. Download and Flash SuperSU from TWRP LINK
Follow the steps correctly.......then only it will work
Additional Files
Motorola + Cyanogen Boot Animations LINK
Motorola + Cyanogen Boot Logo LINK
Stock M ROM Recovery Image + TWRP v3.0.0.0 Coustom Recovery Image LINK
enjoy
@gourab
Click to expand...
Click to collapse
Root Moto G2 running on 6.0 VIDEO TUTORIAL
https://www.youtube.com/watch?v=hQbx_-QMKm8

sure thanks..........

Whenever I try rooting my device It gets into Boot loop after flashing Super user.
Sent from my XT1068 using Tapatalk
---------- Post added at 11:05 PM ---------- Previous post was at 11:04 PM ----------
I have also flashed the modified img file.
And then only I flashed Super user but then boot loop occurs.
Random reboots.
Help me guys
Sent from my XT1068 using Tapatalk

manojkumar8552 said:
have you tried to root official build >??????
yes or no ???????
if yes than tell is it working or not !!?
Click to expand...
Click to collapse
Root Moto G2 running on 6.0 WORKING
https://youtu.be/hQbx_-QMKm8

mandar91 said:
Root Moto G2 running on 6.0 WORKING
https://youtu.be/hQbx_-QMKm8
Click to expand...
Click to collapse
But I'm unable to.
Coz everytime I do.
My phones goes to boot loop

sura14 said:
but i'm unable to.
Coz everytime i do.
My phones goes to boot loop
Click to expand...
Click to collapse
you are using br retail moto g 2014?

mandar91 said:
you are using br retail moto g 2014?
Click to expand...
Click to collapse
Nope Indian Moto G 2014 aka XT1068

sura14 said:
But I'm unable to.
Coz everytime I do.
My phones goes to boot loop
Click to expand...
Click to collapse
same problem here.

SP FLASH TOOL Tutorial to install TWRP / Custom Recovery in Lenovo K3 Note

UPDATE: Hi. This is just to notify everyone that I am not maintaining or replying to comments in this thread anymore.
K3 note was one of my most favorite phone of all time, and will always be, but it's way too old now. I am using and doing 'research' on other devices now.
So please pardon me for not replying to you. But you can always find help regarding issues on tons of other places!
:highfive:
​
Installing custom recovery on K3 Note using SP Flash Tool
(COMPLETE TUTORIAL)​
NOTE:
This post helps you if you need to:
1. Fix a bricked device
2. Install custom recovery to install custom rom later
3. Make your device bricked (if you do not follow this post correctly)
You will find the necessary files related to this post in the attachments
First, get your PC ready:
Download and Install "LenovoUsbDriver_v1.1.13.exe", then Restart pc.
Download and extract "SP_Flash_Tool" zip (I used v5.1820_Win, but you may try latest versions)
Link to download : https://spflashtools.com/category/windows
Open SP Flash Tool (Double click on flash_tool.exe from inside the SP Flash Tool folder)
Go to Options > Option... > Download > Tick "DA DL All with Checksum" > Close the options box
Close SP Flash Tool
Now, the flashing part:
Download and Extract "TWRP_v3.0.0-3_for_SP_Flash_Tool.zip" *
Open SP Flash Tool, and From "Download" Tab click on "Scatter-Loading"
Browse the TWRP v3.0.0-3 folder and select the "MT6752_Android_scatter.txt" file > Ok **
Click on "Download" icon
Completely turn off your phone (BUT DO NOT REMOVE BATTERY) and connect it to PC using usb cable.
Wait till the Process completes and a "Download ok" box will appear with a green tick. Disconnect the phone from cable.
Done!
Now press and hold VolumeUp+VolumeDown+PowerButton all three buttons at one untill you see the "TWRP" logo.
The phone will boot into custom recovery you just installed.
Check this screenshot for illustrated steps:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
* The provided folder has TWRP v3.0.0-3 recovery in it
To flash other custom recoveries (Like CWM, or other TWRP versions), follow this:
i. Rename your recovery image file to "recovery.img"
ii. Replace the "recovery.img" file inside the folder from TWRP_v3.0.0-3_for_SP_Flash_Tool.zip with your "recovery.img"
iii. Continue from Step 7
** You can also flash ROW/CUSTOM roms (which are made ready for SP FLASH TOOL) using this method. For that, Just select the scatter file inside the ROM folder (IN STEP 8)
*** REMEMBER If you have a MARSHMALLOW (Android OS 6.0) rom: Marshmallow roms need to be flashed with patched boot image for custom recoveries. Go to the index thread of k50 note for the patched boot images.
And by the way, there's a thanks button below if you find this post helpful! :highfive:

Anyone tried this out?

Anyone....? @stone_henge are the drivers Windows 10 x64 compatible?

bigb0bby said:
Anyone tried this out?
Click to expand...
Click to collapse
Almost everyone who regularly flashes various roms frequently is familiar to this method i suppose.
bigb0bby said:
Anyone....? @stone_henge are the drivers Windows 10 x64 compatible?
Click to expand...
Click to collapse
Please run a check for us.

stone_henge said:
Almost everyone who regularly flashes various roms frequently is familiar to this method i suppose.
Please run a check for us.
Click to expand...
Click to collapse
bigb0bby said:
Anyone....? @stone_henge are the drivers Windows 10 x64 compatible?
Click to expand...
Click to collapse
Windows 10 x64 compatible

If I flash TWRP in this way, am I going to destroy ROM that is currently installed?

Since, I am not born with knowledge of flashing custom recoveries/ROMs, is anyone willing to answer?

drakula1000 said:
If I flash TWRP in this way, am I going to destroy ROM that is currently installed?
Click to expand...
Click to collapse
No, it won't be destroyed.
drakula1000 said:
Since, I am not born with knowledge of flashing custom recoveries/ROMs, is anyone willing to answer?
Click to expand...
Click to collapse
Sorry for being late.

Thanks anyway! I took a risk and flashed it. Luckilly, ROM is untouched.
Sorry for beeing cynical.
I am new in this, trying to learn something.

Hi!! Yesterday I received my lenovo k3 note. I bought it from TinyDeal and i saw that the chinese rom is installed so I can't update my phone to the new version. Can someone please tell me how to flash the row rom for Greece?? And if anyone knows if the row rom is multilingual?? Thank you all for your time!

Need to clear up my mind...
Can we take nandroid backup of a STOCK Firmware???
Im asking cause i have learnt from my old galaxy fit that we can't backup stock one...
Sent from my Lenovo K50a40 using XDA-Developers mobile app

Grigoris0r20r said:
Hi!! Yesterday I received my lenovo k3 note. I bought it from TinyDeal and i saw that the chinese rom is installed so I can't update my phone to the new version. Can someone please tell me how to flash the row rom for Greece?? And if anyone knows if the row rom is multilingual?? Thank you all for your time!
Click to expand...
Click to collapse
Please refer to these two links. There are multiple roms for k3 note. Different roms have slightly different installation processes.
INDEX Thread for K3 Note
Needrom page for K3 note
Rockstar.garvit said:
Need to clear up my mind...
Can we take nandroid backup of a STOCK Firmware???
Im asking cause i have learnt from my old galaxy fit that we can't backup stock one...
Click to expand...
Click to collapse
You can backup any rom you want.
PS> sorry for late reply. I have a lot going on so can't visit here often.

My K3 Note does not boot anymore
Hello,
I installed TWRP then did a Backup (Boot, Data, Systel, Nvram).
Then I choose Reboot System, installed Root.
And the phone does not boot !
What can I do ?
Thank you.

working great with Windows 10 x64

Can I flash the twrp from flashify directly or do I need PC? Thx.

ChrisDG said:
Hello,
I installed TWRP then did a Backup (Boot, Data, Systel, Nvram).
Then I choose Reboot System, installed Root.
And the phone does not boot !
What can I do ?
Thank you.
Click to expand...
Click to collapse
You probably has a marshmallow rom. Marshmallow roms need to flash patched boot image for custom recoveries. Go to the index thread of k50 note for the patched boot images.
----------------------------------------------------------------------------------------------------
Blablablaaah said:
Can I flash the twrp from flashify directly or do I need PC? Thx.
Click to expand...
Click to collapse
If you are rooted, you can do that. Without root this tutorial is the only way.

Only works for me when USB is plugged while holding volume up, else SP flashtool won't start and not responding.

I'm on ROW S327 at the moment. Will this method work for me? Thank you!

stone_henge said:
You probably has a marshmallow rom. Marshmallow roms need to flash patched boot image for custom recoveries. Go to the index thread of k50 note for the patched boot images.
----------------------------------------------------------------------------------------------------
.
Click to expand...
Click to collapse
I want to install twrp with stock marshmallow firmware so do i need to do this too ?
---------- Post added at 12:14 AM ---------- Previous post was at 12:11 AM ----------
Do i need to unlock bootloader before flashing recovery? If so,
How to unlock bootloader (marshmallow stock firmware).

Dear all,
I have done these steps but my lenovo doesn't turn on. It only shows the welcome page of Lenovo. Please, could you help me?
best regards