Wifi stuck on "Turning on", even after reflash - Nexus 4 Q&A, Help & Troubleshooting

Greetinga, xda denizens!
So I tried the LTE Flasher App for my Nexus 4, flashing hybrid modem files in order to enable LTE on my phone, but since then everything seems to be broken about my phone and most importantly wifi is stuck in turning on.
I tried factory resetting and flashing new kernel (Cyanogen 10.2) but that didn't help.
Is there something else I can do? I thought that wiping and reflashing is the most brutal thing you can do to fix what's wrong with your device.
Thanks for any help,
Adam

liveangelic said:
Greetinga, xda denizens!
So I tried the LTE Flasher App for my Nexus 4, flashing hybrid modem files in order to enable LTE on my phone, but since then everything seems to be broken about my phone and most importantly wifi is stuck in turning on.
Adam
Click to expand...
Click to collapse
Flashing a kernel doesn't flash modem, you need to do that manually. Download a stock modem from xda/google and flash it using fastboot. I don't know if it's related to wifi or not, but it's worth a shot.

Yup. If the radio you flashed is faulty a factory reset/ROM reflash/kernel reflash won't change a thing. The radio is a separate partition and 99% of all Roms come without a radio partition. As mentioned above, download a stock radio from here and flash it. Should fix the issue.
Sent from my Nexus 4 using XDA Free mobile app

Related

Wifi stuck in an Infinite loop

So i went from Syndicate rom on EB13 and flashed over it with the new Frankenstein rom, when i got the rom working my wifi stopped working. Figureing this was just an issue with the rom its self i flashed the whole phone back to EB13 Stock. This didnt work so i re-flashed all the way back to DG27 using odin and my Wifi still isn't connecting to my network. It will see the network, then it will just hang saying Obtaining address. Some times it will get past obtaining adress and it will stop working by just saying out of range. I dont know what else to do. Anyone know what i should do?? I refuse to believe this is a hardware problem due to how fast it was messed up after tinkering with the software. Is there anything i can do to completely reset everything on the phone?
did u flash with odin? Did u wipe cache/data/delvick between each flash? I had this happen to my phone. I reinstalled original os (di18) with odin and it worked fine.
Sent from my SPH-D700 using XDA Premium App
I always Wipe everything before i flash anything onto my phone so yes...
I guess i could try takinng it all the way back to di18 rather than DG27
I figured just didn't want to assume. Try flashing back to original os with odin. Outside of that idk what else to tell ya. Good luck. If I come across anything I will pass it on to ya.
Sent from my SPH-D700 using XDA Premium App

[Help] Lost my 3G after flashing 3.2.2

All workt realy good with Tiamat 2.2
Then I got the less awesome ide of trying the new 3.2.2 update.
Now the crazy thing happend I lost all my 3G.
So I figured if I flash back to Tiamat it might solve the problem, but nope
and I tryed flashing back to stock and still no 3g.
Anyone have an ide of what I mest up and how to fix this.
Did you flash the stock rooted 3.2.2 that tells you that you will lose 3G if you do???
flash back to 3.2, and it should come back, but 3.2.2 is for the ones with the 4g chip installed.
yea I must have mist that, but when flashing back or to stock I dident get my 3g back, Gonna trye flashing some more (Got all day)
---------- Post added at 03:32 PM ---------- Previous post was at 03:19 PM ----------
yeay, ok after some flashing and some tvshow waching I finally got my 3g back
Now my Xoom feels compleete tnx all
Nandroids are your friend.
Sent from my Xoom using xda premium
I have no 3G now either.
I received my Xoom back fro the 4G upgrade yesterday, unlocked and right before pushing su and superuser files I started bootlooping.
I re-locked with instructions on Motorola's website which got me back to 3.0 but I cannot connect to 3G now (I'm not in a 4G area).
I've tried flashing nand backup after rooting 2nd time but got bootlooped again so re-locked again.
I did all the OTA upgrades and am at 3.2 now, but still have no connectivity. WiFi works fine...
Anyone have suggestions?
raw33 said:
I have no 3G now either.
I received my Xoom back fro the 4G upgrade yesterday, unlocked and right before pushing su and superuser files I started bootlooping.
I re-locked with instructions on Motorola's website which got me back to 3.0 but I cannot connect to 3G now (I'm not in a 4G area).
I've tried flashing nand backup after rooting 2nd time but got bootlooped again so re-locked again.
I did all the OTA upgrades and am at 3.2 now, but still have no connectivity. WiFi works fine...
Anyone have suggestions?
Click to expand...
Click to collapse
let me know if you ever get this resolved... exact same situation as you.
http://dl.dropbox.com/u/22648028/HLK75Csystemboot.7z password is "AceXMachine" without the quotes
Flash via fastboot same as stock images.
adb reboot bootloader
fastboot flash boot boot.img
fastboot flash system system.img
fastboot erase cache
fastboot reboot
May need to wipe data, don't forget to erase cache. 4G and WiFi working on my xoom with these images and it should already be rooted. Let me know if it works.
AceXMachine said:
http://dl.dropbox.com/u/22648028/HLK75Csystemboot.7z password is "AceXMachine" without the quotes
Flash via fastboot same as stock images.
adb reboot bootloader
fastboot flash boot boot.img
fastboot flash system system.img
fastboot erase cache
fastboot reboot
May need to wipe data, don't forget to erase cache. 4G and WiFi working on my xoom with these images and it should already be rooted. Let me know if it works.
Click to expand...
Click to collapse
i guess i should ask which rom did you flash from? did you go from the stock and rooted 3.2.2 rom from the dev thread? or from a complete stock factory image?
Does it have the lte/cdma with in networks? And do we need to have a custom recovery? If it is rooted can I go straight from stock 3.2.2?
Sent from my Xoom using xda premium
I just applied this and no LTE/CDMA option.
So under mobile networks there is no setting for you to switch? Then this is not the most up to date version.
Sent from my Xoom using xda premium
There is some version that the LTE devices ship back with labeled 3.2.2, but it does not look like what others have posted all over the net saying 3.2.2. Not sure what the deal is but I just got Verizon to do a warranty replacement on my Xoom LTE. If someone can explain to me how to export that Rom when I get the replacement device I will post that for everyone to have a look.
I'm too stuck in this boat as well.
I received my Xoom after the LTE Upgrade and flashed the 'Stock 3.2.2' Rom and started having all the wifi issues. I thought I remembered my 3g working with this ROM but I honestly don't know if I'm remembering right.
Anyway, I tried going back to stock but obviously, no one has the actual latest build. When I received my Xoom back, I absolutely had the option of choosing LTE/CDMA and none of the images and ROMs floating around right now have that.
The problem I'm having now is my 3g doesn't work with ANY ROM or or image I've tried. This includes stock 3.0 and all the updates, the Stock 3.2.2 ROM, Tiamat, the image in this thread of the nandroid and the Pilot 3.2.2 image going around.
gordon12393 said:
I just applied this and no LTE/CDMA option.
Click to expand...
Click to collapse
I flashed this same file myself and I have it so I do not know what is going on with yours. We have to be missing something simple here.
gordon12393 said:
There is some version that the LTE devices ship back with labeled 3.2.2, but it does not look like what others have posted all over the net saying 3.2.2. Not sure what the deal is but I just got Verizon to do a warranty replacement on my Xoom LTE. If someone can explain to me how to export that Rom when I get the replacement device I will post that for everyone to have a look.
Click to expand...
Click to collapse
As far as I know there are 2 versions. HLK42B and HLK75C. Both for the same 3G/4G VZW Xoom's, one is just an earlier build from the pilot group from what I can tell. I do not know what other differences there are between them.
aldouse said:
i guess i should ask which rom did you flash from? did you go from the stock and rooted 3.2.2 rom from the dev thread? or from a complete stock factory image?
Click to expand...
Click to collapse
What ROM I flashed from is irrelevant, but it was the earlier HLK42B biuld I mentioned before which was infact stock/rooted 3.2.2 to these HLK75C 3.2.2 images.
hammer4203 said:
Does it have the lte/cdma with in networks? And do we need to have a custom recovery? If it is rooted can I go straight from stock 3.2.2?
Sent from my Xoom using xda premium
Click to expand...
Click to collapse
It does on mine. Although after a factory reset it is having trouble connecting to 4G, I am working on that now, but it does still have the LTE/CDMA option.
Hey I just got updated to HLK75D. I am unrooted and locked, but if you want the files tell me how to get em and I will.
Sent from my Xoom using xda premium
I agree with AceXMachine's post above. I do believe that there is something wrong with my Xoom. The whole reason I'm having this ordeal is because I lost my 3G/4G connection all of a sudden and during troubleshooting with Verizon and Motorola things have gone down hill over the last 24 hours.
One question for AceXMachine I have is can you connect to 3G? I saw you posted you are having problems with 4G.
Same Problem with Connectivity as many
I sent my Xoom off for 4G upgrade and received it. Moto in its infinite wisdom sent me a new Xoom. So naturally, I started my Xoom and 3G/4G failed because I had a new MEID. Motor provided this new Xoom without syncing up with Verizon. So Verizon didn't have my MEID synced to my new 4G card. This explains the connectivity issues I had OOB.
I wish I new that before I went about a variety of flashing that failed in one way or the other. I did eventually get things to run with 3g/4g, and here s what I did.
1. Flash HRI66
2. Do a hard reset from Settings/Privacy
3. Reboot and fastboot flash recovery-Tiamat-R4c-100611-1150-cwm.img
4. Reboot into CWM and flash Android-HC-3.2.2-Stock+Rooted-1.1-SOLARNZ.zip
5. Flash HLK75C from this thread above as directed
Upon reboot both my WIFI and 3G/4G were restored.
When you reboot you should get prompted for HLK75D which is the market.
Peace & Joy
gordon12393 said:
I agree with AceXMachine's post above. I do believe that there is something wrong with my Xoom. The whole reason I'm having this ordeal is because I lost my 3G/4G connection all of a sudden and during troubleshooting with Verizon and Motorola things have gone down hill over the last 24 hours.
One question for AceXMachine I have is can you connect to 3G? I saw you posted you are having problems with 4G.
Click to expand...
Click to collapse
Sorry I missed your question. I lost 4G and 3G but it turns out it was because of a kernel I had installed and didn't realize it til later because I was using WiFi. Reflashed and I was good again until I tried installing that same kernel I was testing out...forget the name...Rogue/Arcturus or something.
AceXMachine said:
Sorry I missed your question. I lost 4G and 3G but it turns out it was because of a kernel I had installed and didn't realize it til later because I was using WiFi. Reflashed and I was good again until I tried installing that same kernel I was testing out...forget the name...Rogue/Arcturus or something.
Click to expand...
Click to collapse
I can confirm I had this same problem(Also flashed Rogue's Kernel and lost 3G/4G)! Thanks AceXMachine, you Images saves my bacon.

Wi-Fi not working

Have been enjoying epinter's ROM, but recently been having some issues.
Last week, everything suddenly started misbehaving, and then it rebooted and went into a boot loop. I restored to an older NANDROID backup and it worked fine. But since that event, it has been rebooting quite regularly at random times. Sometimes, it goes into a bootloop. Have realised that if I take out the battery and leave it to cool down for a few mins, it starts working fine. I suppose this is to do with overheating.
I deleted FastDormancy.apk as suggested by epinter. Doesn't seem to have made a difference.
Since day before, it isn't detecting any Wi-Fi networks. I flashed the 20120922 version of epinter's ROM too, but still have the same problem. Tried the WiFi settings, but that didn't help.
Today I cleared data and cache, and reinstalled 20120922 version of the ROM, but still got the problem.
I also upgraded radios to 37p. Didn't help.
Any suggestions on how to diagnose it? Is it possible that Wi-Fi (hardware) is bust?
Sent from my MB860 using xda app-developers app
No suggestions?
Maybe hardware!
Sent from my MB860 using xda premium
Might suggest a full -w in fastoot. Load a different recovery via fastboot then a stable rom just to test with like Joker CM9 or Fruitcake.
If that don't work start checking antenna connections and ribbon cables for damage.
Sent from my MB860 using xda premium
Cab121 said:
Might suggest a full -w in fastoot. Load a different recovery via fastboot then a stable rom just to test with like Joker CM9 or Fruitcake.
If that don't work start checking antenna connections and ribbon cables for damage.
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
What do you mean by 'Load a different recovery via fastboot'? I have used fastboot to wipe fully, but could you point me to the 'recovery' to be used?
Thanks
My phone is repeatedly rebooting now. It's not in a boot loop. It actually boots into ICS and then reboots after some time.
Really would appreciate any insights on this.
You can use fast boot to flash recovery files to the phone. You need to while recovery then use "fastboot flash recovery filename.img" for example. Assuming your file is in the same directory on your PC.
I only suggest out of practice. I typically find if any part of the hardware fails to boot or load with the rest of the phone I start with a clean cwm ,rom, and so on. Start at 0 essentially. If the problem goes away then its most certainly soft wear and you can trouble shoot from thwre
Sent from my MB860 using xda premium
Does Bluetooth work ?
Sent from my MB860 using Tapatalk 2
I've been using the 20120825 version of epinter's rom, and everything has been incredibly stable for me except wifi and bluetooth. Neither will turn on, and under advanced wifi settings my wifi chip is giving the mac address as not available.
I flashed CM7 a few weeks ago to see if that would fix it and CM7 gives an error when I try and turn wifi on, also showing not available for the wifi mac address.
I've seen around here a little bit that this might be a hardware issue that happens irrespective of what rom you use or if still on stock.
Has anyone found a fix for it?
EDIT: also using the 37P radio.
I also found this thread... http://forum.xda-developers.com/showthread.php?p=26163360

Nexus 7 Stock 4.2.2 - Signal Icon?

Hey guys. Recently got a new Nexus 7 and I love it! It had 4.1 installed so I flashed official 4.2.2 image and now, there is a signal icon in the taskbar. Is there a way to disable this? Whenever I go to auto-update an app, it also complains about auto-updating may incur charges over data.. but the Nexus I got is supposed to be a WiFi-only device?
Make sure you have installed a proper image, there is an images for WiFi model and 3g model.
why always me said:
Make sure you have installed a proper image, there is an images for WiFi model and 3g model.
Click to expand...
Click to collapse
Ah, I see that now. Is there a way to re-flash it without having to wipe the device?
If your bootloader still unlocked then yes flash any custom rom using any recovery like cwm without wipe data we call dirty flash but however do it on your own risk it may cause many problems after.
or if you want to stick with stock you may using fastboot to flash only system.img and boot.img.
With bootloader locked there is no way to re-flash without wipe all data.
Sent from my Nexus 7 using xda premium

[Q] Rooted, CM 10.1, clean rom, now stuck...need help!

Hey, I could really use some guidance here. I'll present the information as simply as I can:
I bought a Galaxy s4 AT&T a few days ago. I've been interested in rooting and flashing different roms, but I think I may have done a bit too much.
I rooted using the motochopper method - great, worked like a charm.
I made a backup of my original rom using CWM. I even took that backup and saved a copy of it on my Mac - perfect.
I thought I'd try Cyanogenmod 10.1, so I downloaded the latest nightly build and flashed it using CWM - so far so good.
Everything was working fine, but my LTE (or any data) was not working at all. I could use Wifi, but once I turned wifi off, I had no data, no gps, no 3g, no 4g, no LTE. I tried the *#*#4636*#*# method, the LTEOnOff app, and changing my APN based on the recommendations provided in this thread - I just couldn't get it to work.
I thought I'd try restoring my original backup, but when I went into CWM to do so, it said that my backup could not be found...(I still have a backup on my computer, just in case)
I needed my phone to work, and badly needed LTE to do so. So, I downloaded this rom: [ROM] CleanROM 1.0 -★| Clean and Smooth! | The Way Nature Intended! |★-
So far, this rom was working fine - it's just a debloated version of TouchWiz - which I like. But, here's my problem now - If my phone reboots, it stays frozen on the Samsung logo (with unlocked lock logo underneath), and I can't get past it. I'd have to go BACK into recovery, and flash the CleanROM all over again, and set my phone up as new with all data wiped.
I really need my phone to work again, and I don't know where to go from here. What options do I have left? What can I do to get out of that frozen Samsung loading screen? Can't I just reset my phone to the way it was? Can't the CM10.1 rom work with LTE?
Your help will be greatly appreciated.
Your best option is to flash the stock MDB firmware via odin . After you get the PASS on Odin go ahead and manually boot into stock recovery and wipe data factory reset again then reboot. You will have to re root and reinstall recovery but this will take care of any issues you had from a bad flash.
http://forum.xda-developers.com/showthread.php?t=2261573
Sent from my GT-I9505G using Tapatalk 2
mavverick said:
Hey, I could really use some guidance here. I'll present the information as simply as I can:
I bought a Galaxy s4 AT&T a few days ago. I've been interested in rooting and flashing different roms, but I think I may have done a bit too much.
I rooted using the motochopper method - great, worked like a charm.
I made a backup of my original rom using CWM. I even took that backup and saved a copy of it on my Mac - perfect.
I thought I'd try Cyanogenmod 10.1, so I downloaded the latest nightly build and flashed it using CWM - so far so good.
Everything was working fine, but my LTE (or any data) was not working at all. I could use Wifi, but once I turned wifi off, I had no data, no gps, no 3g, no 4g, no LTE. I tried the *#*#4636*#*# method, the LTEOnOff app, and changing my APN based on the recommendations provided in this thread - I just couldn't get it to work.
I thought I'd try restoring my original backup, but when I went into CWM to do so, it said that my backup could not be found...(I still have a backup on my computer, just in case)
I needed my phone to work, and badly needed LTE to do so. So, I downloaded this rom: [ROM] CleanROM 1.0 -★| Clean and Smooth! | The Way Nature Intended! |★-
So far, this rom was working fine - it's just a debloated version of TouchWiz - which I like. But, here's my problem now - If my phone reboots, it stays frozen on the Samsung logo (with unlocked lock logo underneath), and I can't get past it. I'd have to go BACK into recovery, and flash the CleanROM all over again, and set my phone up as new with all data wiped.
I really need my phone to work again, and I don't know where to go from here. What options do I have left? What can I do to get out of that frozen Samsung loading screen? Can't I just reset my phone to the way it was? Can't the CM10.1 rom work with LTE?
Your help will be greatly appreciated.
Click to expand...
Click to collapse
Factory Reset
Wipe Cache
Wipe Dalvik
Format /system
Flash ROM or ROM and gapps if AOSP
Reboot
KingKongDingDong said:
Factory Reset
Wipe Cache
Wipe Dalvik
Format /system
Flash ROM or ROM and gapps if AOSP
Reboot
Click to expand...
Click to collapse
Having the same issue so I figured I'd give these steps a shot. Followed them exactly and phone (AT&T S4, TWRP) would won't even reboot the first time into CleanROM. I'm stuck on the Samsung screen with the lock.
edit: I've noticed that now, when I reboot into TWRP, it prompts me for a password. Hitting cancel takes me to the regular home screen, but I had not been getting the password prompt before attempting to install CleanROM. A permissions issue, perhaps?
edit 2:
I've just spent some time trying a bunch of things with bits of good luck surrounded with tons of bad. Below are the steps I've taken to try to get CleanROM to boot (and reboot) without any issues. Hopefully they help figure out the issues we're having.
Wipe Cache
Wipe Dalvik
Wipe /system
Flash CleanROM
Reboot
---- Failed
Reboot into Recovery
Prompted for password, hit cancel
Fix permissions
---- Failed
Reboot to recovery
Prompted for password, hit cancel
Format data (type yes)
Reboot
---- Successfully booted to CleanROM
Ran through phone / account setup
Saw home screen
Powered off and then back on (not using reboot)
---- Failed
Reboot to Recovery
No longer prompted for password
Factory Reset
Attempt to Fix Permissions: failed
Restore default settings
Reboot system
---- Failed
Reboot to Recovery
Prompted for Password, hit cancel
Format Data (type yes)
Reboot System
--- Successfully booted to CleanROM
Ran through phone / account setup
Saw home screen
Reboot (using reboot, not power off / on)
---- Failed
Reboot to Recovery
Prompted for password, hit cancel
Factory Reset: failed
Restore Default settings
Prompted for password, hit cancel
Factory Reset: failed
* Internal Storage showing 0MB (as if it's not reading it correctly)
Fix Permissions
Prompted for password, hit cancel
Nothing has changed, my phone is currently chilling in TWRP
MJHawaii said:
Your best option is to flash the stock MDB firmware via odin . After you get the PASS on Odin go ahead and manually boot into stock recovery and wipe data factory reset again then reboot. You will have to re root and reinstall recovery but this will take care of any issues you had from a bad flash.
http://forum.xda-developers.com/showthread.php?t=2261573
Sent from my GT-I9505G using Tapatalk 2
Click to expand...
Click to collapse
This. You decided to ignore this post for some reason.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
cuffed zhesea
Cataligh said:
This. You decided to ignore this post for some reason.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
I can't speak for OP, but I was hoping there was another way to rectify what has already been done without flashing stock seeing as how I'm on OSX. If that's the only option, then so be it.
Hey. Thanks for the feedback in this thread. I flashed factory through Odin, and everything is working fine. I then factory reset my phone through factory recovery. I'm back to standard touchwiz with all the bloat lol.
I'm going to wait until there a more stable release of cm10.1 - that was a good rom.
Appreciate all the help people!
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Your best bet is do what "cataligh" mentioned... flash back to stock via odin...
Sent from my SAMSUNG-SGH-I337 using xda premium
When you flashed cm10 it probably wipe the internal sdcard, you should ALWAYS do you backups to the extsdcard...period.
TheAxman said:
When you flashed cm10 it probably wipe the internal sdcard, you should ALWAYS do you backups to the extsdcard...period.
Click to expand...
Click to collapse
Yeah, absolutely! I always backed up and flashed roms from my external SD.
mavverick said:
I'm going to wait until there a more stable release of cm10.1 - that was a good rom.
Click to expand...
Click to collapse
waiting is for simpletons. get aokp and transcend...
jaboles said:
I can't speak for OP, but I was hoping there was another way to rectify what has already been done without flashing stock seeing as how I'm on OSX. If that's the only option, then so be it.
Click to expand...
Click to collapse
As I mentioned before starting over is always the Best and Safe way to go. Shortcuts will only cause you headaches and possibly get you a brick that is why you see Odin stock threads. Do yourself a favor and start over I know it sucks but when your modifying your phones its gonna happen once in awhile.
Sent from my GT-I9505G using Tapatalk 2
MJHawaii said:
As I mentioned before starting over is always the Best and Safe way to go. Shortcuts will only cause you headaches and possibly get you a brick that is why you see Odin stock threads. Do yourself a favor and start over I know it sucks but when your modifying your phones its gonna happen once in awhile.
Sent from my GT-I9505G using Tapatalk 2
Click to expand...
Click to collapse
Wise words. Took your advice, installed Windows with boot camp, and got back to stock via odin.
I am going to say something about this thread, we are all giving advice on how to do this and that, and not once is it mentioned anywhere....in the OP
WHAT DEVICE WE ARE TALKING ABOUT! PLEASE STATE THE DEVICE WHEN NEEDING HELP!
The Ax says, I apologize if I missed what device.
TheAxman said:
I am going to say something about this thread, we are all giving advice on how to do this and that, and not once is it mentioned anywhere....in the OP
WHAT DEVICE WE ARE TALKING ABOUT! PLEASE STATE THE DEVICE WHEN NEEDING HELP!
The Ax says, I apologize if I missed what device.
Click to expand...
Click to collapse
My original question was for the AT&T version of the Galaxy S4 - i337.
xBeerdroiDx said:
waiting is for simpletons. get aokp and transcend...
Click to expand...
Click to collapse
Welllllll I just tried installing AOKP as well (Task650). Buttttttt, same issue with the LTE stuff. I tried reviewing all the APN settings, but didnt get any data connection on my phone except for wifi.
mavverick said:
Welllllll I just tried installing AOKP as well (Task650). Buttttttt, same issue with the LTE stuff. I tried reviewing all the APN settings, but didnt get any data connection on my phone except for wifi.
Click to expand...
Click to collapse
What APN settings were you using?
Sent from my SAMSUNG-SGH-I337 using xda premium
doktor buknasty said:
What APN settings were you using?
Sent from my SAMSUNG-SGH-I337 using xda premium
Click to expand...
Click to collapse
Yeah, data was enabled - and I was using ATT LTE apn settings that I found on these forums. I made sure to use the right now. Plus, when I rebooted my phone, it got stuck on the Samsung lock screen again...
Juuuuust ODINed back to factory right now for the second time :crying:
Was it these settings:
Sent from my SAMSUNG-SGH-I337 using xda premium
doktor buknasty said:
Was it these settings:
Sent from my SAMSUNG-SGH-I337 using xda premium
Click to expand...
Click to collapse
Yes, those were the exact settings that I used. Is it possible that I could have a defective phone or sim card?
Right now, I am on factory touchwiz with root enabled, and my phone is working perfectly fine. I can reboot, use LTE, everything. The problem starts when I load any CM or AOKP rom...

Categories

Resources