Hey there,
Has anyone here replaced a dead LCD screen (not digitizer)? IF you have could you tell me the symptoms you were getting. I'm going to try to replace mine but I'd like to be sure that it's the screen causing the problem and not something else.
Thanks!
GG
also, could you let me know where you got your LCD from?
You can get them from ebay for about $100, that all i know of though.
Google lms283gf01 and see if you can find some
Actually, I picked one up on eBay for $28. Yes, that was a new LCD, not the digitizer. It even came with the tools to open the phone. There are good instructions around for a complete dis-assemble and it was relatively painless.
I broke the original LCD, so there was no question whether it "failed" or not.
Well I can't see any cracks or anything in the LCD. I think I'm just going to get a Diamond. Unfortunately, no NFSFAN...
GG
lcd screen
Hey, you wanna get rid of your broken vogue? [email protected]. get back with me if you're interested. Or maybe I can advise you on how to repair your vogue...I've done several myself.
Good luck.
Hi all,
I have a HD2 and some numpty decided running a shopping trolley into my leg would be fun... the result, I have a broken screen.
The actual damage appears to only be superficial, I can still use the touch screen and the phone is in full working order but the glass has cracked.
I've been looking online and all I can find is a replacement digitizer... I am wondering if anyone know that this is what I need or not?
Regards
Ben
If the touchscreen still works then you don't need to replace the digitizer. You only need the glass part, but separating the digitizer from the glass and replacing it is a very difficult process and you would probably be better off getting a whole new screen assembly instead.
if the touch screen still works then in theory you just need a new piece of glass, not a digitizer (which is a thin plastic sheet).
problem is whether or not you can get the old digitizer off thee broken glass without damaging it.
mZimm said:
If the touchscreen still works then you don't need to replace the digitizer. You only need the glass part, but separating the digitizer from the glass and replacing it is a very difficult process and you would probably be better off getting a whole new screen assembly instead.
Click to expand...
Click to collapse
Do you know of anywhere that sells the full set up?
B
Anyone know anything about this? I really need to get it fixed quickly
Found something on Mobilefun (check google cant paste links)
Would that be suitable?
Its the glass display and digitizer?
If you want to try to do it yourself these official HTC repair videos may help.
Disassemble - http://www.youtube.com/watch?v=cL-jnUKufC4&feature=player_embedded
Reassemble - http://www.youtube.com/watch?v=t8Q7mXdcJ54&feature=channel
I suppose I could do it myself but I'm really looking at prices of parts before I take it to some phone shop, I would have my insurance cover it but my bank are being arses about it...
That way if they say its 150.00 then I can say ahhhh na....
ba0987 said:
I would have my insurance cover it but my bank are being arses about it...
Click to expand...
Click to collapse
You have a premium debit account that insures your phone?
yeh, however they claim I never registered it even though I have provided them proof of my telephone call...
Not impressed but I would rather put that behind me closing the account with them and moving banks
and how far into the process do you have to go before you take off the glass section of the phone I can see it seperate at the end but I didnt see whem it was taken off
ta B
this is not really related to repairing your own broekn hd2, but it's for sure youtube gave it to me as a related video to the HD2 reassemble:
http://www.youtube.com/watch?v=Db7pKjUrNXQ
I loved it, every bit of it.
I have a Natwest Premium account and I wouldn't trust them with my phone insurance as far as I could throw them. The £10 I spend a month on my O2 insurance is worth it, i've claimed 2-3 times in the last 4 years, and they have bought the new one to my door and taken the pieces of my old ones away, job's a goodun!
And as for your question I haven't a clue if I am honest, I have never disassembled a HD2 before. Thank God.
Hi all, I cracked the screen on my HD2 a few days ago and have been eagerly reading the reports of how to replace the digitiser, etc. I'm working up the courage (and getting the tools) to do it, but in the meantime the digitiser and screen are perfectly functional, if a little bit unsightly. I thought I'd get hold of a screen protector in the meantime so I don't end up with bits of glass in my fngers, etc. Any recommendations of a form fitting protector (or form fitting case) that would fit the bill? Ideally it would cover the bezel around the buttons too, because one corner of it is quite chipped. The pics on ebay are kind of hard to tell from. Any advice much appreciated!
I might be too late as you mentioned that you already getting the tools to fix it yourself. There are specialty repair shops that fix screens, I heard they are not too expensive. I don't know the exact price, but someone with a broken nexus one got his phone fixed this way. Do you mind telling how you cracked your screen, was it your negligence or is it too fragile?
I'm not looking for info about how to repair - I've read those threads. I'm interested in the best temporary fix for the meantime.
The cracked screen is largely due to negligence... dropped it outside. Woulda been nice if the phone was a little more sturdy, but can't expect much better. And thank God it still works just fine as far as I can tell. Gonna be more careful now...
Hey guys,
Just got out the car, fell over the cat and my HD2 has slipped from my top pocket and slammed screen down into the concrete driveway, doh! The screen is obliterated with cracks ... however
1. The picture is 100% clear/fine
2. The touchscreen works 100%
Can I just replace the top glass cover/screen, or is it an all in one combined unit? Im confident with electronics, just wish to know the answer before part hunting and stripping the device.
Cheers
Mike
Vapourmike said:
Hey guys,
Just got out the car, fell over the cat and my HD2 has slipped from my top pocket and slammed screen down into the concrete driveway, doh! The screen is obliterated with cracks ... however
1. The picture is 100% clear/fine
2. The touchscreen works 100%
Can I just replace the top glass cover/screen, or is it an all in one combined unit? Im confident with electronics, just wish to know the answer before part hunting and stripping the device.
Cheers
Mike
Click to expand...
Click to collapse
I would call HTC. They are good on their prices when it comes to fixing stuff that is out of warranty. A guy I knew got his Nexus One screen replaced for $90.
ap3604 said:
I would call HTC. They are good on their prices when it comes to fixing stuff that is out of warranty. A guy I knew got his Nexus One screen replaced for $90.
Click to expand...
Click to collapse
Problem is, I cannot afford to be without my phone, the phone is still usable its just difficult to read through the cracks, the image and touchscreen still work perfect, it's as if another layer of glass sits overtop.
Im 100% confident in stripping electronics etc, was just after a quick answer as to whether anyone knew if this was likely to be an entire screen or just a digitizer, if no one knows I will just strip it down tomorrow when I can get to my T drivers.
check out this vid on dissembling the hd2 - you might find your answer there..hope it helps
http://www.crunchgear.com/2010/03/02...g-the-htc-hd2/
look on craigslist. a lot of shady places replace your broken screens for cheap
Moschino02 said:
check out this vid on dissembling the hd2 - you might find your answer there..hope it helps
http://www.crunchgear.com/2010/03/02...g-the-htc-hd2/
Click to expand...
Click to collapse
http://www.crunchgear.com/2010/03/02/official-htc-step-by-step-video-for-disassembling-the-htc-hd2/
mrroey said:
look on craigslist. a lot of shady places replace your broken screens for cheap
Click to expand...
Click to collapse
I'm happy to repair myself as I see no reason to pay someone money when I work with electronics daily and I can locate parts easily, just need to know if its the digitizer or the LCD that's broken without pulling the device apart.
Also, thank you for the link above, will give that a look now, I really think it's just the top digitizer as the screen still shows a crystal clear image, the backlight works fine and the touchscreen works too, its just badly cracked.
This happened to me (apart from the cat), however it seems you got lucky, the LED screen decided to break, has all funny white lines over it but the glass is perfect.
^^ As far as going to fix it your self is concerned, I would have tried myself, however I just know with my luck that something would go wrong and it wouldnt work D:
I usually go via the DIY route but I've seen too many stories where HD2 repairs have gone horribly wrong. It seems that replacing one part is fairly straightforward but avoiding damage to others is not. I'm sure that as miniaturization continues repairs, even by talented amateurs, will become impossible.
It's your digitizer. It's available online. Just make sure you get the right one for your country. TMO-US uses a different one than everywhere else, I believe. Also, watch the video linked above. The digitizer removal I hear is somewhat tricky. Good luck!
Hi there and hello from Croatia!well,i must say changing digitizer on hd2 aint easy.lcd is glued with some special glue type and after you glue them up u need to glue digitizer for housing,for that im using ebay double sided iphone 3m tape but it is not strong enough.as for the hardware inside u ned to be 100% concentrated on this cuz flat for keypad is 30$...digitizer around 50$...chinese resellers with good quality.good luck!
Unfortunately my screen broke, the LCD is working fine, and recognizes touches.
Is it possible to change only the glass and digitizer? Eg
I'm afraid of LCD panels from eBay. The service said that warranty is void at all events (even if they repair it).
I'm currently in the same situation. Any update on your phone's screen?
A local repair shop can't fix it unless I buy a panel myself and let them fix it for me. I want to know what I need if the glass is broken, but touches and LCD are fine: just glass or a complete screen replacement, like this one: https://www.aliexpress.com/item/Rau...Panel-Replacement-for-Xiaomi/32835465822.html .
I will order a complete LCD panel with frame and try to replace myself. But I don't know if they are the same quality as original.
erikieperikie said:
I'm currently in the same situation. Any update on your phone's screen?
A local repair shop can't fix it unless I buy a panel myself and let them fix it for me. I want to know what I need if the glass is broken, but touches and LCD are fine: just glass or a complete screen replacement, like this one: https://www.aliexpress.com/item/Rau...Panel-Replacement-for-Xiaomi/32835465822.html .
Click to expand...
Click to collapse
Let us know when you do! Please also specify which replacement you bought. It's a good idea to document these things, because in the coming years many more people will break their screens, unfortunately, but we can help them finding out what screens are worth buying.
I'm especially interested in touch performance and LCD similarity to the original. If you could pay attention to those properties and comment on them when you know, that would be really helpful.
Never try replacing one yourself, no matter how tempting and easy it looks on youtube videos, without proper gears and experience, you will end up damaging the whole panel. I know because I tried and failed myself and ended up buying the whole front panel with the LCD.
It will be much cheaper to buy it off ebay and let a experienced guy do it.
Did you tried with LCD+frame kit? It looks much easier that way. What happened exactly?
billysam said:
Never try replacing one yourself, no matter how tempting and easy it looks on youtube videos, without proper gears and experience, you will end up damaging the whole panel. I know because I tried and failed myself and ended up buying the whole front panel with the LCD.
It will be much cheaper to buy it off ebay and let a experienced guy do it.
Click to expand...
Click to collapse
Sec0nd said:
Did you tried with LCD+frame kit? It looks much easier that way. What happened exactly?
Click to expand...
Click to collapse
I was trying the glass with digitizer which was pretty much cheap, which needs to be removed with proper gears and lot of patience with a heat gun(I have seen local shop guys doing it without them with ease), It was an old samsung s3 which I kept to experiment on, ended up buying the whole front assembly which I did installed successfully(made me feel a lot better). That looks easy and there is less of chance of any breaking, unless you are very careful in removing all the tiniest sensors and wire and put them accordingly, but then you have to carefully pick the whole assembly there are plenty of low quality ones around, where you might get one that gives issues. for instance on Samsung s3 it was an original amoled display. but I got one that was an LCD panel display and there were issues where brightness sensor didn't worked at all.
Your best bet would be an original LCD+frame kit, I don't know if you really can get one off ebay.
So my three advices.
1. try to get only the glass with digitizer off ebay(If your Display works), then let a local expert change it. much cheaper and let you avoid getting a low quality LCD panel.
2. If it's your first time, I would suggest doing it on a cheaper phone to test your skills, I wouldn't recommend doing it for first timers who have no experience of doing it. there is high possibility that you might break a sensor or a wire.
3. if you want to go ahead with a whole new kit from ebay, make sure you check it without removing any sticker, and connect that display with the motherboard and see if the display is really good and make sure you check the brightness and touch. only if you are satisfied then go ahead, or return the product.
Thank you for the advices!
I couldn't find anybody, who can replace only the glass and digitizer.
The screen and digitizer work fine, only the glass is broken.
billysam said:
I was trying the glass with digitizer which was pretty much cheap, which needs to be removed with proper gears and lot of patience with a heat gun(I have seen local shop guys doing it without them with ease), It was an old samsung s3 which I kept to experiment on, ended up buying the whole front assembly which I did installed successfully(made me feel a lot better). That looks easy and there is less of chance of any breaking, unless you are very careful in removing all the tiniest sensors and wire and put them accordingly, but then you have to carefully pick the whole assembly there are plenty of low quality ones around, where you might get one that gives issues. for instance on Samsung s3 it was an original amoled display. but I got one that was an LCD panel display and there were issues where brightness sensor didn't worked at all.
Your best bet would be an original LCD+frame kit, I don't know if you really can get one off ebay.
So my three advices.
1. try to get only the glass with digitizer off ebay(If your Display works), then let a local expert change it. much cheaper and let you avoid getting a low quality LCD panel.
2. If it's your first time, I would suggest doing it on a cheaper phone to test your skills, I wouldn't recommend doing it for first timers who have no experience of doing it. there is high possibility that you might break a sensor or a wire.
3. if you want to go ahead with a whole new kit from ebay, make sure you check it without removing any sticker, and connect that display with the motherboard and see if the display is really good and make sure you check the brightness and touch. only if you are satisfied then go ahead, or return the product.
Click to expand...
Click to collapse
Sec0nd said:
Thank you for the advices!
I couldn't find anybody, who can replace only the glass and digitizer.
The screen and digitizer work fine, only the glass is broken.
Click to expand...
Click to collapse
I saw MiA1 LCD panel, Touchscreen and digitizer which is around $39-$46 on ebay, while I couldn't find just the glass with Digitizer. I think the best bet right now would be with the full kit with LCD. as they aren't selling without the LCD at the moment.
Although I would suggest you keep the original LCD panel with broken glass,(don't try to remove it yet, let the glue wear off itself until then) in case they do start to sell in future the glass with digitizer only. There could be a next time(who knows? or you can just sell that to someone), where you will at least have an original LCD, these things break very easily. be sure to keep them safe, and if you feel confident enough, you can try it yourself, just be careful with the glue, and the pins. go gentle, it's a surgery. best of luck!
I found several glass with digitizer on eBay: https://www.ebay.com/sch/i.html?_fr...RS0&_nkw=Xiaomi+A1+touchscreen+glass&_sacat=0
billysam said:
I saw MiA1 LCD panel, Touchscreen and digitizer which is around $39-$46 on ebay, while I couldn't find just the glass with Digitizer. I think the best bet right now would be with the full kit with LCD. as they aren't selling without the LCD at the moment.
Although I would suggest you keep the original LCD panel with broken glass,(don't try to remove it yet, let the glue wear off itself until then) in case they do start to sell in future the glass with digitizer only. There could be a next time(who knows? or you can just sell that to someone), where you will at least have an original LCD, these things break very easily. be sure to keep them safe, and if you feel confident enough, you can try it yourself, just be careful with the glue, and the pins. go gentle, it's a surgery. best of luck!
Click to expand...
Click to collapse
billysam said:
I saw MiA1 LCD panel, Touchscreen and digitizer which is around $39-$46 on ebay, while I couldn't find just the glass with Digitizer. I think the best bet right now would be with the full kit with LCD. as they aren't selling without the LCD at the moment.
Although I would suggest you keep the original LCD panel with broken glass,(don't try to remove it yet, let the glue wear off itself until then) in case they do start to sell in future the glass with digitizer only. There could be a next time(who knows? or you can just sell that to someone), where you will at least have an original LCD, these things break very easily. be sure to keep them safe, and if you feel confident enough, you can try it yourself, just be careful with the glue, and the pins. go gentle, it's a surgery. best of luck!
Click to expand...
Click to collapse
I love advices like that.U r smart.
I've also cracked my screen.... happened yesterday when I accidentally dropped it on concrete. Touch is working fine, only glass is broken.
So would be buying only the digitizer like this one: goo.gl/ZDPoFd do its job if I let it do at the local repair shop or buy the whole LCD as mentioned above?
Roykooiman said:
I've also cracked my screen.... happened yesterday when I accidentally dropped it on concrete. Touch is working fine, only glass is broken.
So would be buying only the digitizer like this one: goo.gl/ZDPoFd do its job if I let it do at the local repair shop or buy the whole LCD as mentioned above?
Click to expand...
Click to collapse
You're going to need to ask your local repair shop. Some shops will be able to replace the digitzers, others only do the full LCD assembly. Again others will not even accept repairs where you bring in the parts, they'll source the parts themselves.
Localhorst86 said:
You're going to need to ask your local repair shop. Some shops will be able to replace the digitzers, others only do the full LCD assembly. Again others will not even accept repairs where you bring in the parts, they'll source the parts themselves.
Click to expand...
Click to collapse
I've contacted a local repair shop and said they couldn't do only the digitizer, but they can do the whole LCD repair which will cost me 25 euro. Now I have to find the right one..... as you have so much variant on Ebay and Alie. U have a suggestion on which one to choose?
My MI A1 display is craked .but display is working and phone functions are working .just I ask you if I using the craked display for long time is it problem come.phone sold 3 days ago so I cannot want to repair the lcd. .Plz advice
I bought this one: https://www.aliexpress.com/item/Ori...izer-Display-For-Xiaomi-MiA1/32831902856.html
I let a local phone repair shop do the repair for me. They did a great job. The screen itself is also great. I think it could be an original, as I can't tell any difference. The colours seem the same, it measures up to 10 simultaneous touches (like the original), the performance feels identical. I recommend this screen! I've also left a review with pictures on Ali Express, but it's still being processed.
I ordered a white screen for my black Mi A1, so now I have a stormtrooper! (or panda, whatever you want...)
Screen plus repair in total about €60, well worth it IMO. It's quite a fraction of the original purchase price, but hey, I shouldn't have dropped the phone after a month. I've also ordered a plain black back cover to help me better grip the device.
erikieperikie said:
I bought this one: https://www.aliexpress.com/item/Ori...izer-Display-For-Xiaomi-MiA1/32831902856.html
I let a local phone repair shop do the repair for me. They did a great job. The screen itself is also great. I think it could be an original, as I can't tell any difference. The colours seem the same, it measures up to 10 simultaneous touches (like the original), the performance feels identical. I recommend this screen! I've also left a review with pictures on Ali Express, but it's still being processed.
I ordered a white screen for my black Mi A1, so now I have a stormtrooper! (or panda, whatever you want...)
Screen plus repair in total about €60, well worth it IMO. It's quite a fraction of the original purchase price, but hey, I shouldn't have dropped the phone after a month. I've also ordered a plain black back cover to help me better grip the device.
Click to expand...
Click to collapse
Do buttons light work ?
NITRO_100 said:
Do buttons light work ?
Click to expand...
Click to collapse
Yes! See attached images. The LED also works, but isn't on in the pictures.
erikieperikie said:
Yes! See attached images. The LED also works, but isn't on in the pictures.
Click to expand...
Click to collapse
You are lucky then, because it's common for Xiaomi that the buttons won't lite when replacing screen.
NITRO_100 said:
You are lucky then, because it's common for Xiaomi that the buttons won't lite when replacing screen.
Click to expand...
Click to collapse
I didn't know that! It wouldn't have been bad, because I don't like the button backlight at all: it's on for too short, it's too bright, it's not like I can't find the buttons and it's not like I don't know what functions the buttons have... I hope we can turn it down or off in the stock ROM in the future!