Related
I was getting bored with my standard s4 rom, so in my rush to move forward I flashed http://forum.xda-developers.com/showthread.php?t=2544474 (►►[AOSP] Official 4.4.2 - S4 Google Edition - v10 - Feel the Experience of Nexus◄◄) thinking I was on a i9505 and not bothering to check and also not bothering to make a backup.
anyway it works but I was getting random reboots (known on this rom) and mad battery drain (what previously was 50% at the end of the day now is flat).
So i decided to go back to stock. It was then that I realised that when I do a system check, my phone actually is a i9505g.
I downloaded a couple of i9505g images from http://forum.xda-developers.com/showthread.php?t=2569510 and http://forum.xda-developers.com/showthread.php?t=2544056 however when I try and flash, ODIN come up with a fail. I have tried changing to stock recovery from http://forum.xda-developers.com/showthread.php?t=2442882 but still no luck.
Interestingly when I try flashing the modems from http://forum.xda-developers.com/showthread.php?t=2452034 these won't flash either.
I'm a bit flummoxed as I can flash other modems to it via odin.
I haven't uninstalled drivers and odin or tried other ports as when i flash modems they do work (they don't all actually work but i can change them) and i can change custom recovery too.
Any suggestions???
jonallwright said:
I was getting bored with my standard s4 rom, so in my rush to move forward I flashed http://forum.xda-developers.com/showthread.php?t=2544474 (►►[AOSP] Official 4.4.2 - S4 Google Edition - v10 - Feel the Experience of Nexus◄◄) thinking I was on a i9505 and not bothering to check and also not bothering to make a backup.
anyway it works but I was getting random reboots (known on this rom) and mad battery drain (what previously was 50% at the end of the day now is flat).
So i decided to go back to stock. It was then that I realised that when I do a system check, my phone actually is a i9505g.
I downloaded a couple of i9505g images from http://forum.xda-developers.com/showthread.php?t=2569510 and http://forum.xda-developers.com/showthread.php?t=2544056 however when I try and flash, ODIN come up with a fail. I have tried changing to stock recovery from http://forum.xda-developers.com/showthread.php?t=2442882 but still no luck.
Interestingly when I try flashing the modems from http://forum.xda-developers.com/showthread.php?t=2452034 these won't flash either.
I'm a bit flummoxed as I can flash other modems to it via odin.
I haven't uninstalled drivers and odin or tried other ports as when i flash modems they do work (they don't all actually work but i can change them) and i can change custom recovery too.
Any suggestions???
Click to expand...
Click to collapse
I'm going to start by saying you're damn lucky you haven't totally bricked your phone.
You really need to slow down and understand what you're doing.
It sounds like you do have an i9505, otherwise the GE ROM you flashed would of giving you an error 7.
Anyway because you have flashed a Google Edition ROM onto your i9505 it has changed the build prop so now your device says it's an i9505G.
You should be fine to flash any stock firmware for an i9505 to restore your phone.
In future read instructions very carefully and make sure you actually know what you're doing before attempting to flash your phone.
Hope you can get it back up and running as an i9505
Obagleyfreer said:
I'm going to start by saying you're damn lucky you haven't totally bricked your phone.
You really need to slow down and understand what you're doing.
It sounds like you do have an i9505, otherwise the GE ROM you flashed would of giving you an error 7.
Anyway because you have flashed a Google Edition ROM onto your i9505 it has changed the build prop so now your device says it's an i9505G.
You should be fine to flash any stock firmware for an i9505 to restore your phone.
In future read instructions very carefully and make sure you actually know what you're doing before attempting to flash your phone.
Hope you can get it back up and running as an i9505
Click to expand...
Click to collapse
I thought I did, I've been flashing phones, for years now, to a lesser degree, and though I've got in deep water, I 've never drowned.
I presumed that regardless of what you flashed onto the phone, system info it would report back what it actually was - so when I checked and saw that it was listed a i9505g I didn't know you could change what it was reported back. Live and learn.
I will have a go with a i9505 ROM and see what happens...
Hello everyone, i'm a new member. I apologize if my english is not good enough.
After been driven insane by one pre-installed app from my Operator (Claro Peru) i decided that it was time to root my device to get rid from that pest. I'm a noob, so i started to investigate about the safest methods to not damage my phone. My Device's model is SGH I337m.
The plan was to update the FW from JB 4.3 that came with my phone to 4.4.2 and then proceed to root. I downloaded the Canadian 4.4.2 FW with build version I337MVLUFNC1 and installed manually with Odin. After the phone rebooted, my S4 was upgraded with 4.4.2 but Samsumg keyboard was going insane, so i went to the apps and solved that cleaning the cache/data. Then i noticed that the Wifi wasn't connected, i tried to turn it on, but then a message with a shield appeared saying that my device security stopped the operation. Beliving it was only a problem with KNOX, i installed autoroot (CF-Auto-Root-jfltecan-jfltevl-sghi337m) with Odin, open SuperSU and stopped it from working, but the Wifi still wouldn't connect.
So the first thing that crossed my mind was to unroot and do a factory reset, didn't work. The FW still was 4.4.2, so i´ve been searching solutions with this FW because i've read some cases of devices that stopped working completely after trying to do a downgrade. so i don't want to go to that route for now.
After a couple hours of search, some solutions i found on the forum were:
- Install Faux123 Kernel (Found on Youtube, this would be the thread i think http://forum.xda-developers.com/showthread.php?t=2273437http://forum.xda-developers.com/showthread.php?t=2273437
- Flash a modem for i337m
- Safestrap recovery and bypasslkm.zip
- Downgrade
I haven't tried any of this methods because i dont want to get into a deeper trouble. In the first solution i'm not sure what to do because this is the files the author recommends for canadian models (i337m), but when i enter here http://faux.romhost.me/jflteatt/jb42/http://faux.romhost.me/jflteatt/jb42/ only jflteatt appears, and that would be i337 model, isn't it? I thought that installing it may cause more troubles, so i didn't do it.
For the flashing modem method, i'm not really sure if installing a modem from another country would get me in trouble, so again i didn't proceed.
I found the Safestrap and recovery method on a downgrade thread for the i337, so again, didn't do it.
So, is there a way to get one of this methods working on i337m to get wifi working again, or is there any other better method to get back wifi.
I would really appreciate any help you can give me guys.
Copellius said:
... My Device's model is SGH I337m.
The plan was to update the FW from JB 4.3 that came with my phone to 4.4.2 and then proceed to root. I downloaded the Canadian 4.4.2 FW with build version I337MVLUFNC1 and installed manually with Odin. After the phone rebooted, my S4 was upgraded with 4.4.2 but Samsumg keyboard was going insane, so i went to the apps and solved that cleaning the cache/data. Then i noticed that the Wifi wasn't connected, i tried to turn it on, but then a message with a shield appeared saying that my device security stopped the operation. Beliving it was only a problem with KNOX, i installed autoroot (CF-Auto-Root-jfltecan-jfltevl-sghi337m) with Odin, open SuperSU and stopped it from working, but the Wifi still wouldn't connect.
So the first thing that crossed my mind was to unroot and do a factory reset, didn't work. The FW still was 4.4.2, so i´ve been searching solutions with this FW because i've read some cases of devices that stopped working completely after trying to do a downgrade. so i don't want to go to that route for now.
After a couple hours of search, some solutions i found on the forum were:
- Install Faux123 Kernel (Found on Youtube, this would be the thread i think http://forum.xda-developers.com/showthread.php?t=2273437http://forum.xda-developers.com/showthread.php?t=2273437
- Flash a modem for i337m
- Safestrap recovery and bypasslkm.zip
- Downgrade
I haven't tried any of this methods because i dont want to get into a deeper trouble. In the first solution i'm not sure what to do because this is the files the author recommends for canadian models (i337m), but when i enter here http://faux.romhost.me/jflteatt/jb42/http://faux.romhost.me/jflteatt/jb42/ only jflteatt appears, and that would be i337 model, isn't it? I thought that installing it may cause more troubles, so i didn't do it.
For the flashing modem method, i'm not really sure if installing a modem from another country would get me in trouble, so again i didn't proceed.
I found the Safestrap and recovery method on a downgrade thread for the i337, so again, didn't do it.
So, is there a way to get one of this methods working on i337m to get wifi working again, or is there any other better method to get back wifi.
I would really appreciate any help you can give me guys.
Click to expand...
Click to collapse
ok so you have the i337m canadian version... making anything related to safestrap and the att i337 irrelevant, completely different methods so don't get them confused lol
you were updating from stock 4.3 right? your best bet is to factiry reset and reflash stock fw for 4.4.2 before you brick your device... kitkat is very different from 4.3, maybe read up on it a bit too...
for ex, the "message with a shield appeared saying that my device security stopped the operation" isn't related to needing to root, it's an option under security settings.
to enable superuser on kitkat you need to enable developer options, then enable superuser. I prefer supersu so manually install that from play store afterwards. I recommend checking and/or enabling this as soon as the phone completes booting up after flashing.
also I think there's a known issue w/ 4.4.2 and wifi not turning on until after 2nd boot completed if I rememebr correctly, been using 4.4.4 for awhile now though so could be wrong...
good luck and check out the help section :angel:
Hi there. Very sorry to post about this - I've tried my best to solve the issue on my own and doing various searches, here and elsewhere, but to no avail. Long and short of it is that WiFi and Bluetooth both seem to have died on me.
I have a Canadian Bell Samsung Galaxy S4 (SGH-I337M). I have been installing Danvdh's Google Edition ROM for some time now, and so far, it's been great. After installing 4.4.4 (clean, after a full wipe), it seemed to work, but my phone froze up - completely unresponsive, including the power switch. Pulled the battery but then afterwards could not turn on WiFi or BT - just says "Turning Wifi On" but nothing ever happens - the message just stays there perpetually. Bluetooth same thing, except the message goes away after a few seconds.
I've tried all of the following to try to restore WiFi, none of which has worked:
- Odin reflash of modem.bin and NON-HLOS.bin, multiple times (from the most recent stock ROM for my device - I337MVLUFNE1, 4.4.2)
- Complete reversion to stock (I337MVLUFNE1, 4.4.2) using Odin - neither WiFi nor BT worked under stock either
- Factory reset while in stock
- After rooting stock, using an SQL editor to check the value of wifi_display_on - it was 0 but just to make sure I set it to 0 again
- After rooting stock, deleting wpa_supplicant.conf in both /data/misc/wifi/ and /etc/wifi/
- Reinstalling Danvdh 4.4.4 (clean), but this time with the Googy kernel rather than the KT kernel (in both cases it was the customized version, not the pure Nexus one)
- Also tried, just for the heck of it, switching to ART to see if that might make a difference - it didn't
- Ringing a bell, opening a book and lighting a candle
In other words, I am at my wits' end. If anyone might have any suggestions - even just a link to some other possible solution I would be most grateful. I have tried searching, both in XDA and elsewhere, for a possible solution and have tried everything I've found, but so far, nothing has worked. Any suggestions would be most appreciated.
Please note - I originally posted this in the thread for Danvdh's ROM. I didn't get any feedback there, so suspect I perhaps might be posting the question in the wrong place, so am trying here, in addition to the thread for Canadian S4s. I trust such cross-posting is OK (but if not please let me know).
not_su said:
Hi there. .....
- Ringing a bell, opening a book and lighting a candle
In other words, I am at my wits' end. If anyone might have any suggestions - even just a link to some other possible solution I would be most grateful. I have tried searching, both in XDA and elsewhere, for a possible solution and have tried everything I've found, but so far, nothing has worked. Any suggestions would be most appreciated.
Click to expand...
Click to collapse
To be honest, I have no idea if that could be related... on one of my I9300, directly after OTA, I lost the WiFi and BT. Problem was WiFi or/and BT, when I pressed to switch it on, was turning on, for maybe 0.5 sec, and then was turning itself off.
now the funny story: because I unrooted it and cleaned prior to OTA, it was immaculate, so I took it to Sammys hiTech local specialists.
They two times were returning phone to me, stating that they are unable to repeat the problem. So, I asked them to not send it back, and that I'll pick it from Service Centre. I used that opportunity, and asked another local master to show me how to use the WiFi on my 100% working phone. He itself packed it into same envelope and disappeard for half a time, after that itme I was informed that my phone will be sent to me after motherboard replacement.
now, the correlation: no (in theory) action which could affect hardware, obviously CAUSED damage. If I'd be you, I'd try to restore the clean condition, and I'd go to service centre.
spamtrash said:
now, the correlation: no (in theory) action which could affect hardware, obviously CAUSED damage. If I'd be you, I'd try to restore the clean condition, and I'd go to service centre.
Click to expand...
Click to collapse
Thanks very much - appreciate the suggestion, but the warranty on my phone ended last month, so I'd get hit for a bill for the repair.
You raise a good point - it may well be a simple hardware failure that happened, coincidentally, when I updated. Alas, I wouldn't know where to begin to try to figure out whether or not it is a hardware failure...
I have the same problem with WiFi (bluetooth works though) after upgrading to 4.4.2 today.
The only modification I had done before were CF-AutoRoot and TWR.
I unrooted from SuperSU's menu prior to upgrading to stock 4.4.2 with KIES, everything seemed to work, except now I can't turn on wifi.
Where can I get the modem.bin for a Canadian Bell Samsung Galaxy S4 (SGH-I337M)?
Thanks for any help!
Here's the about screen: (Shouldn't the Baseband version be the same as the build? What gives?)
Tsuushin said:
Where can I get the modem.bin for a Canadian Bell Samsung Galaxy S4 (SGH-I337M)?
Thanks for any help!
Click to expand...
Click to collapse
here....
Tsuushin said:
I have the same problem with WiFi (bluetooth works though) after upgrading to 4.4.2 today.
The only modification I had done before were CF-AutoRoot and TWR.
I unrooted from SuperSU's menu prior to upgrading to stock 4.4.2 with KIES, everything seemed to work, except now I can't turn on wifi.
Where can I get the modem.bin for a Canadian Bell Samsung Galaxy S4 (SGH-I337M)?
Thanks for any help!
Here's the about screen: (Shouldn't the Baseband version be the same as the build? What gives?)
Click to expand...
Click to collapse
I don't remember where I got mine but it was extracted from the latest stock rom. Googling the build led me to this page, which seems to have links to download the most recent stock for the S4.
Not sure about your other question. I know when I update a new custom rom, the baseband version doesn't change - that only changes when I update the modem or flash an updated stock rom using Odin. You might also want to try flashing the NON-HLOS.bin file - I read elsewhere that that has helped others. Of course, feel free to also try all the other options I've noted above.
In case it helps other people with the same problem, here's what I did that fixed the WiFi issue:
I flashed the latest modem.bin (twice) and NON-HLOS.bin, but it didn't fix the WiFi.
I flashed the latest stock ROM, and now WiFi works.
Cheers.
I just swapped from my Amaze 4g, to a used Note 3, and I'm a little lost as far as where I should start.
It says that it's on 4.4.2, and that I cannot update due to a modified system.
Basically, I would like to get updated to 5.1.1 (or as close as is official for the Note 3), and root it.
I'm afraid I'm not familiar with Samsung devices, and because I purchased this from ebay, I don't know how to tell the exact state that the former user put it in (I expected they would return it to stock prior to selling).
It's currently a T-Mobile branded, SM-N900T, on 4.4.2, build is KOT49H, security software MDF v1.0 release 2. Kernel is 3.4.0-660648.
It is supposedly unlocked for carriers, though I have not attempted a SIM card use yet, until I can tell that what I have is a valid device and the IMEI is checked out.
Any thoughts on how to validate the IMEI, and sort out how to get my new phone up to date would be appreciated. As I stated, I expected the vendor would have returned it to stock, but that is clearly not the case, so I don't want to accidentally boot loop it by doing something I shouldn't. I have not owned a Samsung before, so I want to be careful on how it differs from my Nexus 7, Amaze 4g, and Droid X, as they're all obviously very different in the OS area.
Thank you for the help1
Download tbe stock 4.4.2 rom and use odin to install. Then you will get the OTA updates.
Sent from my SM-N900P using Tapatalk
There is no stock 5.1.1 for note 3, only cm12.1/ aosp. Latest is 5.0 and you can use odin to flash. Maybe it's rooted that's why you can't update.
bladebarrier said:
I just swapped from my Amaze 4g, to a used Note 3, and I'm a little lost as far as where I should start.
It says that it's on 4.4.2, and that I cannot update due to a modified system.
Basically, I would like to get updated to 5.1.1 (or as close as is official for the Note 3), and root it.
...
Thank you for the help1
Click to expand...
Click to collapse
Some apps to install from Play Store...
Phone INFO Samsung - this will tell you all about your phone and the firmware etc.
Root Checker Basic - tells you if you are rooted or not.
SuperSU - this is so valuable you should buy the Pro licence. Chainfire does some great work for our phones.
TWRP - I have the zip version on my extSDCard and an Odin version on PC in case I have to rebuild from a Stock firmware. CWN works OK but most ROM builds seem to be for TWRP I think and a backup from one will not work on the other.
I don't know your previous phone so you probably need Odin v3.09 - this sits on PC and lets you flash firmware to the phone. (connected by USB)
For which you need Samsung USB drivers so the PC will recognise the phone. Install on PC before connecting phone.
Then do some browsing and find the processes to root your phone and install the ROM you want. If you just want Stock and access to all your phone, you can root it after flashing the original v5.0 download (from Sammobile or similar site - note on Sammobile you need a free account to DL) and then install Custom recovery (if wanted - it WILL trip the Knox flag but that may not matter given it's 2nd hand and might already be tripped anyway)
Read, make SURE you understand what is being said BEFORE you do anything - ask if you don't.
Good luck...
N9005 Lollipop brick
Hi All, just need a huge help here, a friend of mine has been using a N9005 which was auto restarting, she went online and downloaded this firmware...N900AUCUEOC1_N900AATTEOC1_N900AUCUEOC1_HOME.tar.md5....2.5GB in size...and flashed it, but the phone is stuck in boot loop even after recovery wiping data and cache, the phone can boot into download mode but re flashing the firmware always fails.....is there a solution for this.....please help
Thank you all for the info, especially the detailed info from Journyman16. I checked, and it is flagged as custom, which is fine, so I'm going to go ahead and try to return to mostly stock, update it, and root it.
Ok, everything went well. I had to do two attempts at rooting, but I think it's just one of those things where sometimes it doesn't restart into the process every time.
All seems good. I'm on 5.0, rooted, busyboxed, and smooth sailing.
Thank you all, again, for the tips. The Note 3 is running very well. Thank you to all of the devs that have made this process so refined. I've donated to you before, and did so again today. It's outstanding to have such well versed coders, on XDA, helping out the community.
mjmbirige said:
Hi All, just need a huge help here, a friend of mine has been using a N9005 which was auto restarting, she went online and downloaded this firmware...N900AUCUEOC1_N900AATTEOC1_N900AUCUEOC1_HOME.tar.md5....2.5GB in size...and flashed it, but the phone is stuck in boot loop even after recovery wiping data and cache, the phone can boot into download mode but re flashing the firmware always fails.....is there a solution for this.....please help
Click to expand...
Click to collapse
You have never learned not to ask in others posts? What does your problem has to do with this topic at all?
When you need help. Just click on Q&A then Create a new thread. How hard is it?
So I am really new to rooting/flashing roms (like just started experimenting 5 days ago). I (or rather my phone) have been through smart phone hell. I successfully rooted my device, and the first ROM I flashed was liquidsmooth (don't judge). At this point everything still worked. So (being the greedy person that I am) I decided to try a different one, this time cyanogenmod. It happened to be the latest version (the marshmallow-like one). Once this booted up, I realized I could no longer connect to the network, only WiFi. So I reset it back to liquidsmooth (using a restore I made with ClockworkMod), only now my data still didn't work. After trying several versions of cyangenmod and ultimately getting my binary counter up to 9, I finally decided to try and get back to the stock samsung version I had before (sprint). After a lot of messing around, I was finally successful in this respect and now am back to Android 5.0.1 (lollipop). STILL NO DATA. I looked at my APNs and they are all grayed out (I can't select one) and none are selected. I don't know too much about this, or if this is even causing the problem. Any help would be appreciated!
[Solved]
Well I ended up rooting it, using the "Triangle Away" app to reset the binary counter to 0, unrooted it, then took it to a sprint store. All they did was 'call' ##72786# and it reset the whole user account settings and after that the phone connected fine to the network, and now I am back to where I was when I started all of this. Samsung Galaxy S4 with Lollipop. I am extremely tempted to try all of this again, now that I sorta know what I am doing...