Database Users

[Q] 4.4.2 OTA update error "No Command"

Hi everyone,
I recently got the 4.4.2 OTA update from google and as soon as it restarts, it gets stuck in recovery with an error saying "No Command". I can successfully reboot into 4.4 without issues but it downloads it again and I get the same error.
Im running Stock 4.4 without ROOT or any mods,
Thanks for the help!

I would recomend all wipes available in recovery, but you will loose all data. APS will restore if you store aps data in google
tapped from ace

If you are fully 100% stock and not rooted, download the latest stock image here: https://dl.google.com/dl/android/aosp/mantaray-kot49h-factory-174ba74f.tgz
The site: https://developers.google.com/android/nexus/images#mantaraykot49h
the links are messed up but use the above as it works.
Then extract and apply via fastboot:
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash boot boot.img
fastboot flash cache cache.img
This should NOT cause you to lose any data and see if that fixes your issues.
good luck

planet_x69 said:
If you are fully 100% stock and not rooted, download the latest stock image here: https://dl.google.com/dl/android/aosp/mantaray-kot49h-factory-174ba74f.tgz
The site: https://developers.google.com/android/nexus/images#mantaraykot49h
the links are messed up but use the above as it works.
Then extract and apply via fastboot:
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash boot boot.img
fastboot flash cache cache.img
This should NOT cause you to lose any data and see if that fixes your issues.
good luck
Click to expand...
Click to collapse
After running"fastboot oem unlock" and restart the bootloader, it returns to locked all by itself...
Not sure whats wrong.

Not sure why you needed to unlock to begin with. If you are fully stock and run the unlock command it will do a factory wipe if it completes successfully.
Unlocking and updating are different things and not really related so I'm a bit lost with your response.

planet_x69 said:
Not sure why you needed to unlock to begin with. If you are fully stock and run the unlock command it will do a factory wipe if it completes successfully.
Unlocking and updating are different things and not really related so I'm a bit lost with your response.
Click to expand...
Click to collapse
I did try to update and it says its successful but after i restart the n10, im still on 4.4 with my data intact. I tried to unlock the bootloader to use the flash-all.bat command.
Its very weird, any pictures i delete or apps i remove, after a restart, they come back. It also freezes a lot randomly to a point where it becomes unusable.
I guess my tablet is dying but it sucks because its only been a week since my warranty expired...

I don't think you need to unlock to apply the factory image. It will wipe and replace all if you run it from your PC. The whole point of it is to completely wipe your tablet and replace it with a clean base OS.
I'd be surprised if its a hardware issue. At this point you should just extract the 4.4.2 factory image and run the batch file with no unlock commands before or after. This will wipe all data everywhere and should successfully restore your tablet to operation.

[Q] Slate 7 Extreme root,flash question

Hi, I am a happy owner of the HP Slate 7 Extreme which is basically the same device as you guys are using.I am still on the 4.2 Jelly bean since HP are not pushing over the air updates with our devices.I want to use the script from the development forum "[Script] [Utility] Nvidia Tegra Note 7 Kitkat Unlock BL, Restore, Recovery, & Root", I want to know if anyone has tried to use it with the Slate Extreme or if it simply should work on the Jelly Bean aswell. Thanks guys.

still have freeze/hang issue..
http://forum.xda-developers.com/showthread.php?t=2663449&page=2

mofared said:
still have freeze/hang issue..
http://forum.xda-developers.com/showthread.php?t=2663449&page=2
Click to expand...
Click to collapse
What about the 4.3+ ?

crazyhacker202 said:
What about the 4.3+ ?
Click to expand...
Click to collapse
i have not test that yet but i believe it should work because i have tested the 4.4.2 and 4.2.2 evga ROM from here using the cwm install from sdcard method..
http://forum.xda-developers.com/showthread.php?t=2627671
The only thing that puzzles me now is i am unable to perform a system recovery from HP update.zip using cwm.
http://h10025.www1.hp.com/ewfrf/wc/...en&cc=us&dlc=en&sw_lang=&product=6608632#N147
So right now i am stuck with 4.2.2 evga ROM all is good and functional.
I have read some post that by updating OTA fix issue in 4.4 but i have no idea on how to get the OTA update.
p/s: This is my first tablet and root attempt...
edit:
i found out that rootjunky has already released the 4.4.2 with 2.3 OTA i will give it a try and feedback later

mofared said:
i have not test that yet but i believe it should work because i have tested the 4.4.2 and 4.2.2 evga ROM from here using the cwm install from sdcard method..
http://forum.xda-developers.com/showthread.php?t=2627671
The only thing that puzzles me now is i am unable to perform a system recovery from HP update.zip using cwm.
http://h10025.www1.hp.com/ewfrf/wc/...en&cc=us&dlc=en&sw_lang=&product=6608632#N147
So right now i am stuck with 4.2.2 evga ROM all is good and functional.
I have read some post that by updating OTA fix issue in 4.4 but i have no idea on how to get the OTA update.
p/s: This is my first tablet and root attempt...
edit:
i found out that rootjunky has already released the 4.4.2 with 2.3 OTA i will give it a try and feedback later
Click to expand...
Click to collapse
First, nope, you'll still get freezing. I've tried all the ROMs.
Second, If you want to go back to HP's recovery, do the following:
Create a copy of update.zip and navigate to META-INF\com\google\android and open up updater-script
Delete the first three lines.
Transfer your new update.zip to your device and flash. Allow it to re-write the recovery partition.
NOTE THAT YOUR DEVICE WILL NOT ADVANCE PAST THE BOOT ANIMATION. THIS IS NORMAL.
Copy the original update.zip to a SD card and insert it into the device.
Now go to the HP recovery partition that now exists on your device and follow HP's restore instructions.
You're done, the stock 4.2.2 that came with your device is now installed.
Had to figure this out the hard way after I lost my original backup.
To the original poster, you can get it to work, but you need to make modifications to the script's fastboot commands (they will require "fastboot -i 0x03F0" before they will do anything) and you will need to setup your machine for ADB with the Slate 7 Extreme. It won't work out of the box, you can find support for that here: http://h30434.www3.hp.com/t5/Android-Tablets-e-g-HP-Slate-7/ADB-drivers/td-p/2574571

There was an individual who has received the 4.4.2 update from HP on his Slate Extreme over at the HP forums. I believe he stated he received 20 units donated directly from HP and was wondering why only 1 of them received the update. I believe the reason stated is that he most likely received a non-retail unit by accident. Not sure if he ever dumped the ROM or even knows how. I don't know either otherwise I'd try to contact him to get him to do so.

Re-write recovery partition?
Robo_Leader said:
First, nope, you'll still get freezing. I've tried all the ROMs.
Second, If you want to go back to HP's recovery, do the following:
Create a copy of update.zip and navigate to META-INF\com\google\android and open up updater-script
Delete the first three lines.
Transfer your new update.zip to your device and flash. Allow it to re-write the recovery partition.
NOTE THAT YOUR DEVICE WILL NOT ADVANCE PAST THE BOOT ANIMATION. THIS IS NORMAL.
Copy the original update.zip to a SD card and insert it into the device.
Now go to the HP recovery partition that now exists on your device and follow HP's restore instructions.
You're done, the stock 4.2.2 that came with your device is now installed.
Had to figure this out the hard way after I lost my original backup.
To the original poster, you can get it to work, but you need to make modifications to the script's fastboot commands (they will require "fastboot -i 0x03F0" before they will do anything) and you will need to setup your machine for ADB with the Slate 7 Extreme. It won't work out of the box, you can find support for that here: http://h30434.www3.hp.com/t5/Android-Tablets-e-g-HP-Slate-7/ADB-drivers/td-p/2574571
Click to expand...
Click to collapse
I did flash the modified update.zip but CWM doesn't give me the option to re-write the recovery partition. I go straight to "Install from sdcard complete". How is that re-write done?
*Update* All done - Had to select NO to questions on reboot (Replace recovery and root). Thanks so much - back to stock 4.2.2

Belmichel said:
I did flash the modified update.zip but CWM doesn't give me the option to re-write the recovery partition. I go straight to "Install from sdcard complete". How is that re-write done?
*Update* All done - Had to select NO to questions on reboot (Replace recovery and root). Thanks so much - back to stock 4.2.2
Click to expand...
Click to collapse
See my HP Slate 7 Extreme Root post: http://forum.xda-developers.com/showthread.php?t=2850893

What am I supposed to open updater-script with?
---------- Post added at 03:47 AM ---------- Previous post was at 03:31 AM ----------
Robo_Leader said:
First, nope, you'll still get freezing. I've tried all the ROMs.
Second, If you want to go back to HP's recovery, do the following:
Create a copy of update.zip and navigate to META-INF\com\google\android and open up updater-script
Delete the first three lines.
Transfer your new update.zip to your device and flash. Allow it to re-write the recovery partition.
NOTE THAT YOUR DEVICE WILL NOT ADVANCE PAST THE BOOT ANIMATION. THIS IS NORMAL.
Copy the original update.zip to a SD card and insert it into the device.
Now go to the HP recovery partition that now exists on your device and follow HP's restore instructions.
You're done, the stock 4.2.2 that came with your device is now installed.
Had to figure this out the hard way after I lost my original backup.
To the original poster, you can get it to work, but you need to make modifications to the script's fastboot commands (they will require "fastboot -i 0x03F0" before they will do anything) and you will need to setup your machine for ADB with the Slate 7 Extreme. It won't work out of the box, you can find support for that here: http://h30434.www3.hp.com/t5/Android-Tablets-e-g-HP-Slate-7/ADB-drivers/td-p/2574571
Click to expand...
Click to collapse
---------- Post added at 04:25 AM ---------- Previous post was at 03:47 AM ----------
I downloaded a script editor and deleted the first three lines of updater script but it still fails to flash.

Finally success!
Robo_Leader said:
First, nope, you'll still get freezing. I've tried all the ROMs.
Second, If you want to go back to HP's recovery, do the following:
Create a copy of update.zip and navigate to META-INF\com\google\android and open up updater-script
Delete the first three lines.
Transfer your new update.zip to your device and flash. Allow it to re-write the recovery partition.
NOTE THAT YOUR DEVICE WILL NOT ADVANCE PAST THE BOOT ANIMATION. THIS IS NORMAL.
Copy the original update.zip to a SD card and insert it into the device.
Now go to the HP recovery partition that now exists on your device and follow HP's restore instructions.
You're done, the stock 4.2.2 that came with your device is now installed.
Had to figure this out the hard way after I lost my original backup.
To the original poster, you can get it to work, but you need to make modifications to the script's fastboot commands (they will require "fastboot -i 0x03F0" before they will do anything) and you will need to setup your machine for ADB with the Slate 7 Extreme. It won't work out of the box, you can find support for that here: http://h30434.www3.hp.com/t5/Android-Tablets-e-g-HP-Slate-7/ADB-drivers/td-p/2574571
Click to expand...
Click to collapse
I have the 4450 extreme and one the things that was a little different- is that I had put the update zip on the sd card prior and it did the update on its own... WEIRD but acceptable! rooted and on 4.4.2- thanks man!

I didn't have any luck doing it this way. I ended up getting there by a slightly different avenue.
My s7e was totally non functional beyong fastboot and recovery mode being operational. I ended up downloading tegratools 2.2. Using the fastboot included in that I unlocked my boot loader with fastboot by the command
Code:
fastboot -i 0x03F0 oem unlock
(The '-i 0x03F0' is a code relating to the specific model, apparently without this the tablet will ignore your command. Please also remember that the unlock factory resets the tablet.)
It may be overboard again, but I also formatted all the system partitions
Code:
fastboot -i 0x03F0 erase boot
fastboot -i 0x03F0 erase system
fastboot -i 0x03F0 erase userdata
fastboot -i 0x03F0 erase cache
fastboot -i 0x03F0 erase preinstall
fastboot -i 0x03F0 reboot
I uploaded cwm recovery from the above version of tegratools to my s7e as it seems a bit more forgiving with signatures than the stock recovery. I used that to upload a version of update.zip with the "assert" lines removed from META-INF\com\google\android\updater-script. I also self signed the .zip to reduce the likelyhood of my upload being rejected by the tablet, it may not be needed, but I did it anyway.
Code:
adb sideload slate7update-signed.zip
when completing the firmware flash, apparently there is a common problem of the kernel not flashing correctly when recovery takes place and giving an "Error 7", this is the problem I think you solved by re-writing the unmodified firmware (but that didn't work for me)
Anyway I had to fix it by dropping back to fastboot and flashing it to "staging", which puts the kernel in a placeholder until the next boot, at which point the kernel will be written to the correct spot. Because of this writing to the correct partition, you will notice a quick double-boot as the updated kernel is written to the correct point in firmware.
Code:
fastboot -i 0x03F0 flash staging "c:\fastboot-s7e\blob"
I hope this helps.
Oh and to those curious, the beats version appears incompatible with the standard s7e, I tried modifying a rom in the same way as above and it just went to a blank screen. My guess is they've done some form of sanity check in the kernel, given that every "beats" version I've read about in tablets has been a software-only modification. I've not bothered trying to use the beats version rom with the s7e kernel, I'll leave that for someone else to try in greater depth as I'm just happy that I got everything working again.
references:
Fastboot (previously this): This is a copy of the twrp/cwm roms as well as fastboot & adb taken from tegratools 2.2 mentioned above.
SignApk (Previously this): The java files and self signing certificate I used to sign the .zip file. It was actually a bit of a pain to find a working signapk.jar that had the valid certificates included, most were broken in one way or another when trying to sign on ubuntu 12.04.
slate7update-signed.zip (previously this): A signed copy of update.zip with META-INF\com\google\android\updater-script modified to remove the assert validation lines sanity checks, be careful with this, you could nuke your tablet if you use it on an incompatible bit of hardware.
guide.txt (previously this): A full how-to with a number of things I've omitted from this response.
To those wondering, I collated the above procedure from a dozen different links on a good four or five websites, including a number of threads here on XDA. Thank you to anyone out there that contributed to the information I found, you really made my day so much better in being able to recover my tablet.

It Worked! But...
mike-s said:
I didn't have any luck doing it this way. I ended up getting there by a slightly different avenue.
My s7e was totally non functional beyong fastboot and recovery mode being operational. I ended up downloading tegratools 2.2. Using the fastboot included in that I unlocked my boot loader with fastboot by the command
Code:
fastboot -i 0x03F0 oem unlock
(The '-i 0x03F0' is a code relating to the specific model, apparently without this the tablet will ignore your command. Please also remember that the unlock factory resets the tablet.)
It may be overboard again, but I also formatted all the system partitions
Code:
fastboot -i 0x03F0 erase boot
fastboot -i 0x03F0 erase system
fastboot -i 0x03F0 erase userdata
fastboot -i 0x03F0 erase cache
fastboot -i 0x03F0 erase preinstall
fastboot -i 0x03F0 reboot
I uploaded cwm recovery from the above version of tegratools to my s7e as it seems a bit more forgiving with signatures than the stock recovery. I used that to upload a version of update.zip with the "assert" lines removed from META-INF\com\google\android\updater-script. I also self signed the .zip to reduce the likelyhood of my upload being rejected by the tablet, it may not be needed, but I did it anyway.
Code:
adb sideload slate7update-signed.zip
when completing the firmware flash, apparently there is a common problem of the kernel not flashing correctly when recovery takes place and giving an "Error 7", this is the problem I think you solved by re-writing the unmodified firmware (but that didn't work for me)
Anyway I had to fix it by dropping back to fastboot and flashing it to "staging", which puts the kernel in a placeholder until the next boot, at which point the kernel will be written to the correct spot. Because of this writing to the correct partition, you will notice a quick double-boot as the updated kernel is written to the correct point in firmware.
Code:
fastboot -i 0x03F0 flash staging "c:\fastboot-s7e\blob"
I hope this helps.
Oh and to those curious, the beats version appears incompatible with the standard s7e, I tried modifying a rom in the same way as above and it just went to a blank screen. My guess is they've done some form of sanity check in the kernel, given that every "beats" version I've read about in tablets has been a software-only modification. I've not bothered trying to use the beats version rom with the s7e kernel, I'll leave that for someone else to try in greater depth as I'm just happy that I got everything working again.
references:
Fastboot: This is a copy of the twrp/cwm roms as well as fastboot & adb taken from tegratools 2.2 mentioned above.
SignApk: The java files and self signing certificate I used to sign the .zip file. It was actually a bit of a pain to find a working signapk.jar that had the valid certificates included, most were broken in one way or another when trying to sign on ubuntu 12.04.
slate7update-signed.zip: A signed copy of update.zip with META-INF\com\google\android\updater-script modified to remove the assert validation lines sanity checks, be careful with this, you could nuke your tablet if you use it on an incompatible bit of hardware.
guide.txt: A full how-to with a number of things I've omitted from this response.
To those wondering, I collated the above procedure from a dozen different links on a good four or five websites, including a number of threads here on XDA. Thank you to anyone out there that contributed to the information I found, you really made my day so much better in being able to recover my tablet.
Click to expand...
Click to collapse
I was able to unlock my bootloader using the above method and it worked. My s7e rebooted and everything was working normally. I loaded the bootloader again to go in and do a cache wipe and my 3 year old bumped into me as I was holding down the volume+ and power buttons. Now I'm stuck in ADX mode (black screen but recognized by my pc, have tried connecting to charger, volume+ and power, volume - and power, nothing works) . I've read that Advent has released adx files for the Vega Note 7 and you can use Tegra Note 7 Super Tools to restore the Nvidia Note 7. I'm wondering if I can use the update.zip file and the nvflash files from Nvidia to restore my tablet from ADX mode.
Any suggestions?

Mike-S, Thanks for the in depth how-to. I tried to sell my Extreme 4450 and the guy that I sold it to said when he received it was in boot loop. I got it back and it is indeed the one I sent him, however, now I have a bricked tab that doesn't even allow fastboot. I have, like others tried calling HP, tried installing per you instruction and finally considered just throwing away or selling. I almost seems like the recovery was wiped... I can get to uploading from SD and have tried using your info to accomplish with no success. Any suggestions? I hate to smash it or try and sell if I can fix it.
Thank you in advance for anyone's help

som1special2 said:
however, now I have a bricked tab that doesn't even allow fastboot. I have, like others tried calling HP, tried installing per you instruction and finally considered just throwing away or selling.
Click to expand...
Click to collapse
Damn, I'm sorry to say that I'm unsure if i'll be able to help much or at all. All i can suggest is look and see if there is any pre-boot subsystem that connects to your pc via usb, similar to the mediatek "preboot mt65xx" which can sort of provide a last gasp chance of recovery.

help with ROM
Hi there,
Need desperate help. I followed the instructions here but ended up with no OS in the s7e. I kept on trying to install a signed ROM via ADB, it reaches 100% senidng but always failed inside TWRP. Not succesful even with CWM. I even tried installing from SD card but no success. Please help, thank you.

Anyone still around here?
Mike S ... not sure you (or anyone else) is paying any attention to this thread anymore (and the HP Slate 7 Extreme at this point is a fairly old device) ... but I can't get any of these methods to work and my S7E (model 4450) is basically useless right now. When cold (i.e. not booted up in prior 30mins or so), I can boot it normally, but within about 10mins, it will "crash" to the all-white HP splash screen and will never recover. Holding the power button just has it go through initial startup, get to the white HP splash screen, and sit there until the battery runs down. I haven't been able to root it yet, so the bootloader still shows "locked". What's ironic is that this device is really all I need -- I don't play high-end games and mostly just stream shows -- but now it's completely unusable. I'm not sure which is easier ... trying to get this to root or just buying something else?
So far, to root, I've tried towelroot and Cydia Impactor, but both of those returned errors as others have reported. I tried following the steps that Mike S put up here, but without my tablet being rooted, adb and fastboot don't even detect my device from the PC (though the PC detects it because I'm able to see it in Windows Explorer and drag files to the storage) ... so it seems like I can't even get to install CWM or anything further.
Maybe the right thing to do is just to dump the paperweight ... it used to work so well but about 6 months ago this stupid HP white screen crash started happening, and since then it's become a regular thing that only takes about 10 mins (at most) before it craps out. I can get to the bootloader and onboard recovery mode, but that doesn't let me load anything.
Not sure where to go next but any advice would be appreciated!
--AJ

MGrad92 said:
Mike S ... not sure you (or anyone else) is paying any attention to this thread anymore (and the HP Slate 7 Extreme at this point is a fairly old device) ... but I can't get any of these methods to work and my S7E (model 4450) is basically useless right now. When cold (i.e. not booted up in prior 30mins or so), I can boot it normally, but within about 10mins, it will "crash" to the all-white HP splash screen and will never recover. Holding the power button just has it go through initial startup, get to the white HP splash screen, and sit there until the battery runs down. I haven't been able to root it yet, so the bootloader still shows "locked". What's ironic is that this device is really all I need -- I don't play high-end games and mostly just stream shows -- but now it's completely unusable. I'm not sure which is easier ... trying to get this to root or just buying something else?
So far, to root, I've tried towelroot and Cydia Impactor, but both of those returned errors as others have reported. I tried following the steps that Mike S put up here, but without my tablet being rooted, adb and fastboot don't even detect my device from the PC (though the PC detects it because I'm able to see it in Windows Explorer and drag files to the storage) ... so it seems like I can't even get to install CWM or anything further.
Maybe the right thing to do is just to dump the paperweight ... it used to work so well but about 6 months ago this stupid HP white screen crash started happening, and since then it's become a regular thing that only takes about 10 mins (at most) before it craps out. I can get to the bootloader and onboard recovery mode, but that doesn't let me load anything.
Not sure where to go next but any advice would be appreciated!
--AJ
Click to expand...
Click to collapse
Get your device drivers right (try androidsdk if it's still not getting recognised) and fastboot the stock system images (fastboot is not root dependent). By the way why were you trying those weird rooting methods ??? Just flash supersu from cwm/twrp and be done with it.

Thanks ... I'll try androidsdk. I actually am a root n00b and so I was trying to figure out the simplest way to go. I guess I guessed wrong! But of course before I can get that working I need the right drivers ... So I'll try that first. I was thinking the drivers were OK since my PC recognized the S7E when Android loaded (before it crashed to the white screen).

Couldn't get androidsdk to work
Hello again... I never could get androidsdk to work. My computer never recognized the tablet to be able to fastboot. *sigh* As much as I hate to give up, I don't know what else to do.... I might try another PC?

Looking for update.zip for S7E
mike-s said:
I didn't have any luck doing it this way. I ended up getting there by a slightly different avenue.
My s7e was totally non functional beyong fastboot and recovery mode being operational. I ended up downloading tegratools 2.2. Using the fastboot included in that I unlocked my boot loader with fastboot by the command
Code:
fastboot -i 0x03F0 oem unlock
(The '-i 0x03F0' is a code relating to the specific model, apparently without this the tablet will ignore your command. Please also remember that the unlock factory resets the tablet.)
It may be overboard again, but I also formatted all the system partitions
Code:
fastboot -i 0x03F0 erase boot
fastboot -i 0x03F0 erase system
fastboot -i 0x03F0 erase userdata
fastboot -i 0x03F0 erase cache
fastboot -i 0x03F0 erase preinstall
fastboot -i 0x03F0 reboot
I uploaded cwm recovery from the above version of tegratools to my s7e as it seems a bit more forgiving with signatures than the stock recovery. I used that to upload a version of update.zip with the "assert" lines removed from META-INF\com\google\android\updater-script. I also self signed the .zip to reduce the likelyhood of my upload being rejected by the tablet, it may not be needed, but I did it anyway.
Code:
adb sideload slate7update-signed.zip
when completing the firmware flash, apparently there is a common problem of the kernel not flashing correctly when recovery takes place and giving an "Error 7", this is the problem I think you solved by re-writing the unmodified firmware (but that didn't work for me)
Anyway I had to fix it by dropping back to fastboot and flashing it to "staging", which puts the kernel in a placeholder until the next boot, at which point the kernel will be written to the correct spot. Because of this writing to the correct partition, you will notice a quick double-boot as the updated kernel is written to the correct point in firmware.
Code:
fastboot -i 0x03F0 flash staging "c:\fastboot-s7e\blob"
I hope this helps.
Oh and to those curious, the beats version appears incompatible with the standard s7e, I tried modifying a rom in the same way as above and it just went to a blank screen. My guess is they've done some form of sanity check in the kernel, given that every "beats" version I've read about in tablets has been a software-only modification. I've not bothered trying to use the beats version rom with the s7e kernel, I'll leave that for someone else to try in greater depth as I'm just happy that I got everything working again.
references:
Fastboot: This is a copy of the twrp/cwm roms as well as fastboot & adb taken from tegratools 2.2 mentioned above.
SignApk: The java files and self signing certificate I used to sign the .zip file. It was actually a bit of a pain to find a working signapk.jar that had the valid certificates included, most were broken in one way or another when trying to sign on ubuntu 12.04.
slate7update-signed.zip: A signed copy of update.zip with META-INF\com\google\android\updater-script modified to remove the assert validation lines sanity checks, be careful with this, you could nuke your tablet if you use it on an incompatible bit of hardware.
guide.txt: A full how-to with a number of things I've omitted from this response.
To those wondering, I collated the above procedure from a dozen different links on a good four or five websites, including a number of threads here on XDA. Thank you to anyone out there that contributed to the information I found, you really made my day so much better in being able to recover my tablet.
Click to expand...
Click to collapse
Hey Mike, you wouldn't still happen to have that signed update.zip since you've don't have it on Dropbox anymore?

[GUIDE]Nexus 9 back to stock guide - Unbrick - Restore factory firmware

The aim of this thread is to make an easy guide to flashing stock firmware. Owners of previous nexus devices already know all this stuff, this thread is aimed at making the process as simple as possible for new users. This will work regardless of what modifications you've done to your device. Remember to backup all your important data and do this with the knowledge that all flashing activity carries some risk.
Download
Factory image here
(for windows users) Minimal adb & fastboot
(for mac users) adb & fastboot for mac
Follow the instructions to install adb on your computer.
Prepare your tablet
Enable developer options in settings > about tablet and tapping build number 7 times
Open developer options and enable usb debugging. (If you haven't unlocked your bootloader yet, tick enable oem unlock)
Extract images
Place the downloaded factory image inside your adb folder and extract with 7zip.
A new folder will be there called something like volantis-lrx21. Open and extract "image-xxxxx-zip" to your adb folder. We are interested in these files:
bootloader-flounder-xxxxxx.img
boot.img
recovery.img
cache.img
system.img
vendor.img
Place these files directly into your adb folder.
# I recommend renaming the 'bootloader-flounder-xxxxxx.img' to just 'bootloader.img' to make it easier to type.
Now that everythings set up, we can start flashing
Plug in your device. Open the adb folder, hold shift and right click and select open command window here
(if your having driver issues try using Pdanet)
Run these commands one at a time
Code:
adb devices
adb reboot bootloader
if you haven't unlocked the bootloader yet run
Code:
fastboot oem unlock
and follow the instructions using the volume keys to scroll through the menu. This procedure will wipe all data.
Run the following commands one at a time
Code:
fastboot flash bootloader bootloader-flounder-xxxxxxx.img
[B] [I](replace 'bootloader-flounder-xxxxx.img' with full name of bootloader image[/I])[/B]
fastboot reboot-bootloader
fastboot -w
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash cache cache.img
fastboot flash system system.img
fastboot flash vendor vendor.img
(OPTIONAL) At this stage you can relock the bootloader if you want by running the command
Code:
fastboot oem lock
finally reboot the device by running
Code:
fastboot reboot
Thats it. Enjoy your tablet in factory condition

Great. Is it possible to make a batch file to run all the commands at once?

albsat said:
Great. Is it possible to make a batch file to run all the commands at once?
Click to expand...
Click to collapse
There is already a flash all batch script that comes with the firmware files but I've noticed that some people have problems with it so I decided not to include it. It should work fine most of the time.

i am long-time familiar with htc,but new to nexus. i was looking thru a couple downloaded factory image files and having noticed that "rebootRUU" is an oem command,and that "image-xxxxx-zip" contains an android info document,i am curious if anyone has tried flashing image-xxxxx-zip as a zip file,in ruu mode?

Cool, thanks for the information.

Thanks for creating this! Will come in handy. Saving this for later

This has been useful as the update from 5.0.1 to 5.0.2 kept failing on my rooted device. It was successful and educational.

scotty1223 said:
i am long-time familiar with htc,but new to nexus. i was looking thru a couple downloaded factory image files and having noticed that "rebootRUU" is an oem command,and that "image-xxxxx-zip" contains an android info document,i am curious if anyone has tried flashing image-xxxxx-zip as a zip file,in ruu mode?
Click to expand...
Click to collapse
I indeed tried this as a last chance hoping it would bypass bootloader lock protection. It didn't work since I think the factory image is not signed by HTC as RUU are . It also lead to a fastboot crash. Now sending my nexus 9 for RMA
Sent from my HTC One using XDA Free mobile app

remedya said:
This has been useful as the update from 5.0.1 to 5.0.2 kept failing on my rooted device. It was successful and educational.
Click to expand...
Click to collapse
Same here. The manual flash method worked very well. Here's hoping that Google doesn't muck 5.1

cant flash stock rom
I'm trying to downgrade my nexus 9 from DU rom 5.1.1 to stock for everything. I'm running the flash-all.sh on linux while my tablet is in bootloader mode. Tab makes and few checks and reboots automatically in bootloader mode. I reboot tablet and still has the DU rom. Any tips

nyasha1935 said:
I'm trying to downgrade my nexus 9 from DU rom 5.1.1 to stock for everything. I'm running the flash-all.sh on linux while my tablet is in bootloader mode. Tab makes and few checks and reboots automatically in bootloader mode. I reboot tablet and still has the DU rom. Any tips
Click to expand...
Click to collapse
The flash all script doesn't seem to work on linux. You shouldn't have a problem if you write the commands out manually.

nyasha1935 said:
I'm trying to downgrade my nexus 9 from DU rom 5.1.1 to stock for everything. I'm running the flash-all.sh on linux while my tablet is in bootloader mode. Tab makes and few checks and reboots automatically in bootloader mode. I reboot tablet and still has the DU rom. Any tips
Click to expand...
Click to collapse
Art Vanderlay said:
The flash all script doesn't seem to work on linux. You shouldn't have a problem if you write the commands out manually.
Click to expand...
Click to collapse
As indicated, the flash all script doesn't work very well on any system. Flash each .img separately via fastboot.

cam30era said:
As indicated, the flash all script doesn't work very well on any system. Flash each .img separately via fastboot.
Click to expand...
Click to collapse
Problem is that the tgz is too big for the device's buffer, so it craps out before it actually writes the images. Its been this way for a while over several different nexus devices. Kind of like nobody at google ever even bothered to test the process.

doitright said:
Problem is that the tgz is too big for the device's buffer, so it craps out before it actually writes the images. Its been this way for a while over several different nexus devices. Kind of like nobody at google ever even bothered to test the process.
Click to expand...
Click to collapse
I agree.

I also used Linux but I executed the commands individually rather than using the script. It worked.

remedya said:
I also used Linux but I executed the commands individually rather than using the script. It worked.
Click to expand...
Click to collapse
I cant flash system.img I get error
sending 'system' (1108544 KB)...
FAILED (remote: data length is too large)
finished. total time: 0.105s

nyasha1935 said:
I cant flash system.img I get error
sending 'system' (1108544 KB)...
FAILED (remote: data length is too large)
finished. total time: 0.105s
Click to expand...
Click to collapse
Update your Android SDK.

These instructions also worked with 5.1.1

im trying to install back to facctory i erased my system and recovery and data and now when i try to flash bootloader i get error cannot open bootloader someone please im stuck in bootloader mode

maxtcee said:
im trying to install back to facctory i erased my system and recovery and data and now when i try to flash bootloader i get error cannot open bootloader someone please im stuck in bootloader mode
Click to expand...
Click to collapse
Are you writing the full name and file path for the bootloader img?

Bricked while trying to install Full Android rom.. Now Boot loop into twrp. Pls help.

Well,
basically subject says all.
I tried to install zulu99 Full android rom 2.1.
basically 'fastboot flash system system.img worked' but 'fastboot -w' failed ('no space left' error).
So I rebooted hoping to reflash a nandroid backup but now the box keeps on rebooting into twrp trying to wipe cache and data but failing. after a while it stops and black screen appears.
I attach the screen it presents when reboots.
Please tell me I didn't trash 220 euros.
Thanks.

puppinoo said:
Well,
basically subject says all.
I tried to install zulu99 Full android rom 2.1.
basically 'fastboot flash system system.img worked' but 'fastboot -w' failed ('no space left' error).
So I rebooted hoping to reflash a nandroid backup but now the box keeps on rebooting into twrp trying to wipe cache and data but failing. after a while it stops and black screen appears.
I attach the screen it presents when reboots.
Please tell me I didn't trash 220 euros.
Thanks.
Click to expand...
Click to collapse
Theres a hardware method to boot into the bootloader, this i think you can test, just to see if you can at least get into bootloader.....nothing more
Details in the official nvidia link
http://nv-tegra.nvidia.com/gitweb/?...ob_plain;f=README_SHIELD;hb=rel-22r18-partner
There's a thread here on the "questions" thread with users reporting that the timing of the hardware method can be a pain in the you know where.............might be worth looking into that thread for their experiences in booting the bootloader using the hardware method
Disclaimer:If your brave enough to risk a brick, read on
I suspect this might be the 2.1 stock/twrp issue........current twrp, or current stock dont play nice
Its a good sign that SOMETHINGS loading, rather then NOTHING booting, but dont know if theirs a solution
My analysis of the situation, of what little i know, the -w (wipe) command was expecting a stock recovery but instead got twrp, which is why your in this situation.........maybe, i stress maybe, if you could reflash stock again, you might be able to boot into android stock again and try full android again, leaving out twrp, until a twrp fix is found
Edit
Saying that, if the bootloader is, as i suspect, now using twrp to flash things, then you might be boned....... im no expert on bootloaders, stock "recoveries" and how they work, so i might be wrong on that
Reports around here say that 1.3 stock firmware is the recommended back to stock firmware, apparently, flashing any other firmware versions, bring their own issues.............
From 1.3 stock, use nvidias official OTA to upgrade from 1.3 stock, to 2.1 stock, then try 2.1 full android again...........note, i dont think you can skip firmwares i.e. you have to upgrade to 1.4, then to 2.0, then to 2.1, alot of downloading.......the OTA does'nt give you any other choice
Before doing anything that ive suggested, wait till someone with more experience to come along........i dont want to be responsible for you fully bricking your shield..........just wanna give you an idea of what i think has happened
If worse comes to worse, if you have warrenty, get a replacement
Gd luck........remember, this is an analysis of your predicament of what i THINK might of happened, and what steps, i likely might of entertained.......after looking into it more thouroughly, knowing that i could get a replacement if it went downhill.........so your mileage might vary
Edits
Crappy grammer, further musings, clarifications

Thanks.[/QUOTE]
puppinoo said:
Well,
basically subject says all.
I tried to install zulu99 Full android rom 2.1.
basically 'fastboot flash system system.img worked' but 'fastboot -w' failed ('no space left' error).
So I rebooted hoping to reflash a nandroid backup but now the box keeps on rebooting into twrp trying to wipe cache and data but failing. after a while it stops and black screen appears.
I attach the screen it presents when reboots.
Please tell me I didn't trash 220 euros.
Thanks.
Click to expand...
Click to collapse
I had something similar about... shield goes booting in recovery and trying delete some cache and keeps repeat and repeat
Hardware boot in fastboot / bootloader mode
Accessing Bootloader via Hardware
Unplug power from the Shield Android TV. *
Wait a few seconds.
Hold down the power button.
Plug in power
Count to three
Release the power button
You should see the bootloader screen.
If you hold it down too long or not long enough, it simply doesn’t work.
Restore Shield Android TV to Stock
P.s. Personally me I followed this instructions and kind of magically got it in bootloader mode. First done by instruction and then just gave up and pressed randomly and fastboot screen appear. Thanks God I had to done only once, if I would do again I wouldn't had patients
Good luck with this, hope you will get sorted
Here will be link about where I got instructions about hardware boot
http://nvidiashieldzone.com/index.php/shield-android-tv/root-shield-android-tv/
Sent from my Nokia 3310 using free xda app

Thanks a lot fro your help.
I was able to put the box in fastboot mode.
Since I'm not that expert can you tell me where and which rom I have to download (I have a french 16gb version of the box).
Then I'd need to know exactly what commands to performs (even a link to a tutorial is fine).
I really appreciate your help. It seems I can (hopefully) save the box.
EDIT: The fastboot command gave me a (not enough space) when I bricked the box. Is there a risk it could happen again while flashing stock? No idea how much space I have left on the box really.
EDIT2: I found this page: https://developer.nvidia.com/shield-open-source
and I'm downloading this rom called nv-recovery-image-shield-atv-upgrade2_1.zip
and Intend to follow these instructions: http://developer.download.nvidia.co...TV/Upgrade-2.1/HowTo-Flash-Recovery-Image.txt
Can anyone please confirm I'm doing right?

EDIT with joy : I followed all the steps using that rom and it seems everything worked. I reconfiguring the box now. Thanks for help.
basically the procedure I intend to follow is this part (please confirm it's ok):
To flash this recovery image to your SHIELD, run the following commands from
the directory where you extracted the recovery image package. If this is the
first time you have done this procedure, you must unlock the bootloader. Get
DTB file name to use for flashing for your product(see below):
P.s. maybe Since past fastboot commands failed and I only flashed system from zulu99 I could skip the 'fastboot flash boot boot.img' command so if it fails again I still can attempt the fastboot process again?
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash userdata userdata.img
fastboot flash staging blob
fastboot flash dtb <DTB file name>

puppinoo said:
Thanks a lot fro your help.
I was able to put the box in fastboot mode.
Since I'm not that expert can you tell me where and which rom I have to download (I have a french 16gb version of the box).
Then I'd need to know exactly what commands to performs (even a link to a tutorial is fine).
I really appreciate your help. It seems I can (hopefully) save the box.
EDIT: The fastboot command gave me a (not enough space) when I bricked the box. Is there a risk it could happen again while flashing stock? No idea how much space I have left on the box really.
EDIT2: I found this page: https://developer.nvidia.com/shield-open-source
and I'm downloading this rom called nv-recovery-image-shield-atv-upgrade2_1.zip
and Intend to follow these instructions: http://developer.download.nvidia.co...TV/Upgrade-2.1/HowTo-Flash-Recovery-Image.txt
Can anyone please confirm I'm doing right?
Click to expand...
Click to collapse
You are on the right way with those links
P.s. You can do manual one by one entering or paste and copy those commands or (I'm doing) drag and drop file "flash-all.bat" on cmd previous opened there where you have abd/fastboot etc files and extracted RIGHT FIRMWARE (like shift and right click mouse "open command prompt here"
And after this all sit down and relax
Anyway you are on the right way.
P.s. Hope you download adb fastboot drivers somewhere from Internet !?!
Sent from my Nokia 3310 using free xda app

Help help help with a hard bricked 6P

Hello guys,
I had my phone rooted with latest twrp. I flashed stock+ rom with Franco Kernel 25r and the A.R.I.S.E file for better sound. I've done the same set up minus the ARISE file and never had an issue.
well to my luck it kept bootlooping and I wasn't able to get back into my custom recovery. When I got home and got my hands on a pc I did a factory reset by manually flashing stock google img . I even used a couple tools since I ran out of ideas and still no luck.
I'm able to do anything through fastboot but I can't seem to get into my recovery at all.
Any ideas or tips of where I should go next?

Not a Hardbrick
As long as you can get to the bootloader mode, you haven't hard bricked your device. Hardbricking is a point where you cant boot your device and in to bootloader so there is no way to flash your device to a useable state.
Now as you can boot to the bootloader, just fastboot boot twrp.img and if you have a factory image zip, copy it in your device internal storage and flash it. Its that simple, provided you are already using an unencrypted boot.img in your current setup. Or else the next step is to flash an decrypted boot.img(you will loose all your userdata and internal storage data.). There are ways to mount the the encrypted filesystem if you are using a pin or password combo with your fingerprint. But without it its a bit more trickier so just for ease and if you dont have any inseparable data in your device now just flash a decrypted boot.img and then you can easily mount your internal storage to your pc and copy the factory image and the rest you already know..

At this point, I'd recommend a full reset.
Flash all the images in the latest Android M factory image (don't flash DP5 or similar N based ROMs): Recovery, Boot, System, Bootloader, Radio, everything.
Once you get stabilized and back into a working phone, then start rooting and messing around with kernels and what not.
To be completely honest, I've flashed nearly every ROM for the 6p, as well as my other Nexus devices, Galaxy phones, Sony phones, and no-name brands and none of those ultra modified kernels did any noticeable change. I tried the F2FS, NTFS, etc file system changes, tweaks to the governors and IO's, all of that, and found the stock kernel was the best. If a kernel with a different IO Scheduler worked even 10% better than the current implementation, and was just as stable, don't you think the Google/Android Engineers would've pushed that to live?
Currently running Pure Nexus July 23rd Update, everything stock that comes with it, Systemless Root/XPosed, and Viper4Android and have never had a performance or stability issue. I'd recommend you do the same.

leninmon said:
As long as you can get to the bootloader mode, you haven't hard bricked your device. Hardbricking is a point where you cant boot your device and in to bootloader so there is no way to flash your device to a useable state.
Now as you can boot to the bootloader, just fastboot boot twrp.img and if you have a factory image zip, copy it in your device internal storage and flash it. Its that simple, provided you are already using an unencrypted boot.img in your current setup. Or else the next step is to flash an decrypted boot.img(you will loose all your userdata and internal storage data.). There are ways to mount the the encrypted filesystem if you are using a pin or password combo with your fingerprint. But without it its a bit more trickier so just for ease and if you dont have any inseparable data in your device now just flash a decrypted boot.img and then you can easily mount your internal storage to your pc and copy the factory image and the rest you already know..
Click to expand...
Click to collapse
First of all thank you for the response.
I've tried flashing the most current twrp and it seems to go through fine on fast boot but when I actually try to get into recovery from the device it will boot loop and just keep doing that.
How can I get into the phones storage through fastboot?
Where can I get the factory zip?
it feels as if everything seems to go good through fastboot but when I actually try to boot the phone nothing seems to work.

Wiltron said:
At this point, I'd recommend a full reset.
Flash all the images in the latest Android M factory image (don't flash DP5 or similar N based ROMs): Recovery, Boot, System, Bootloader, Radio, everything.
Once you get stabilized and back into a working phone, then start rooting and messing around with kernels and what not.
To be completely honest, I've flashed nearly every ROM for the 6p, as well as my other Nexus devices, Galaxy phones, Sony phones, and no-name brands and none of those ultra modified kernels did any noticeable change. I tried the F2FS, NTFS, etc file system changes, tweaks to the governors and IO's, all of that, and found the stock kernel was the best. If a kernel with a different IO Scheduler worked even 10% better than the current implementation, and was just as stable, don't you think the Google/Android Engineers would've pushed that to live?
Currently running Pure Nexus July 23rd Update, everything stock that comes with it, Systemless Root/XPosed, and Viper4Android and have never had a performance or stability issue. I'd recommend you do the same.
Click to expand...
Click to collapse
Thanks for the reply.
I've done the manual flashing already and flashed everything single item the most current factory image. Everything seemed to have gone through okay but when I rebooted the phone it was back to 0.
I'm actually considering getting rid of the phone now since it is my daily =/

Format each partition before flashing.
fastboot format <partition>
wait until it's done, then
fastboot flash <partition> <image>
Some partitions can't be formatted, which there are ways around, but try this first.

Just get to bootloader mode and try booting the twrp.img
fastboot boot twrp.img
From the twrp ui, go to advanced wipe and format your storage.
To mount the internal storage on your PC, enable mtp from twrp screen.
If U are using a decrypted boot.img, it will easily mount ur internal storage. Or try flashing a decrypted boot.img
fastboot flash boot boot.img
Then try the above again..

leninmon said:
Just get to bootloader mode and try booting the twrp.img
fastboot boot twrp.img
From the twrp ui, go to advanced wipe and format your storage.
To mount the internal storage on your PC, enable mtp from twrp screen.
If U are using a decrypted boot.img, it will easily mount ur internal storage. Or try flashing a decrypted boot.img
fastboot flash boot boot.img
Then try the above again..
Click to expand...
Click to collapse
I flashed the twrp.img and it went through successfully at least on the computer it did but when the phone actually tries to get into recovery (twrp) it will start to boot loop and keep on doing that. I tried both an encrypted and decrypted boot img but it still made no difference.
I'm really going crazy over this

Wiltron said:
Format each partition before flashing.
fastboot format <partition>
wait until it's done, then
fastboot flash <partition> <image>
Some partitions can't be formatted, which there are ways around, but try this first.
Click to expand...
Click to collapse
I just tried this and had no luck =/....the phone wont get past the google boot screen

You need to explain more on what you actually tried here.
Just download the latest factory image and try to flash the latest bootloader using fastboot.
Then boot to the bootloader and try formating the device. Not wiping
Then you have to
fastboot boot twrp.img
I believe you have only tried wiping not formating. I faced similar issue before. But once I flashed a decrypted boot.img, it cleared the user data and then I was able to get to twrp.
Maybe your twrp img is corrupted if this didn't work.

leninmon said:
You need to explain more on what you actually tried here.
Just download the latest factory image and try to flash the latest bootloader using fastboot.
Then boot to the bootloader and try formating the device. Not wiping
Then you have to
fastboot boot twrp.img
I believe you have only tried wiping not formating. I faced similar issue before. But once I flashed a decrypted boot.img, it cleared the user data and then I was able to get to twrp.
Maybe your twrp img is corrupted if this didn't work.
Click to expand...
Click to collapse
i just flashed the latest bootloader from the most recent factory image and i did the command format user data and then tried the fastboot boot twrp and the phone will then try to get into recovery, the google logo comes up lasts a couple seconds and boot loops all over to where is says my phone cant be check for corruption
By now i should have been able to get into recovery and it wont go through

edgarted said:
i just flashed the latest bootloader from the most recent factory image and i did the command format user data and then tried the fastboot boot twrp and the phone will then try to get into recovery, the google logo comes up lasts a couple seconds and boot loops all over to where is says my phone cant be check for corruption
By now i should have been able to get into recovery and it wont go through
Click to expand...
Click to collapse
download a factory image and run the flash all file...... it should reboot your phone after 5 minutes and the issue should be resolved.. a hard brick would be a device that does nothing.... in this case i believe that you just didnt do something right.

Then download the latest factory image and extract it
fastboot flash radio.img
fastboot flash bootloader.img
& do a fastboot update the rest archive file as it is
This will flash the rom via fastboot& U don't have to rely on TWRP or CWM

i42o said:
download a factory image and run the flash all file...... it should reboot your phone after 5 minutes and the issue should be resolved.. a hard brick would be a device that does nothing.... in this case i believe that you just didnt do something right.
Click to expand...
Click to collapse
I was really really hoping this would help. I erase/formated everything before flashing anything. I then ran the flash-all file and it took a couple of minutes and it said finished on the command box and my phone restarted and went into the white google logo and rebooted again with a bootloop. I waited around 15 minutes hoping it would start but it didn't.
It honestly feels as if the phone is not processing the full commands but on the pc it seems to go through successfully
is there a way to force an install of a rom and see if maybe a dirty flash over the stock one will allow it to start up?

leninmon said:
Then download the latest factory image and extract it
fastboot flash radio.img
fastboot flash bootloader.img
& do a fastboot update the rest archive file as it is
This will flash the rom via fastboot& U don't have to rely on TWRP or CWM
Click to expand...
Click to collapse
i know how to flash the radio and bootloader but how do i do a fastboot update?

edgarted said:
i know how to flash the radio and bootloader but how do i do a fastboot update?
Click to expand...
Click to collapse
Just unzip the factory image and there U can see the flash shell script files too. Open them in a text editor & U could see the exact command. In a factory img, they also do the same thing via script files. Flashing the radio & bootloader & updating the rest archive

so this is what I've done
I've manually flashed every file needed for the factory image from google.
I also tried wugfresh tool kit which is great but didn't help me much. I flashed stock recovery and treid to boot into to and nothing. I flashed a customer recovery and nothing.
It always does the same thing
the screen that says my phone can't be checked for corruption and then the google sign comes up stays on for a couple seconds and then it bootloops to the can't be checked for corruption.
I try to get into recovery using fastboot commands and the phone does the same exact thing.
I was even able to lock and relock the bootloader and I was able to successfully flash everything at least that is what it showed on the computer
so ive read almost every thread that had to do with bricking and I feel like an expert now but im starting to think it is done =/

edgarted said:
so this is what I've done
I've manually flashed every file needed for the factory image from google.
I also tried wugfresh tool kit which is great but didn't help me much. I flashed stock recovery and treid to boot into to and nothing. I flashed a customer recovery and nothing.
It always does the same thing
the screen that says my phone can't be checked for corruption and then the google sign comes up stays on for a couple seconds and then it bootloops to the can't be checked for corruption.
I try to get into recovery using fastboot commands and the phone does the same exact thing.
I was even able to lock and relock the bootloader and I was able to successfully flash everything at least that is what it showed on the computer
so ive read almost every thread that had to do with bricking and I feel like an expert now but im starting to think it is done =/
Click to expand...
Click to collapse
Hey there. First off make sure to unlock again your bootloader. Then you may follow post # 10 of @Heisenberg 's flashing guide for our device.
First images to flash would be bootloader and radio. First flash bootloader, then make sure to issue the command adb reboot-bootloader. Then afterwards once the phone has rebooted back to bootloader, flash radio, then again do the adb reboot-bootloader again.
Once the phone is again back to bootloader flash the rest of the images except userdata. For the boot.img and recovery.img, flash the stock ones-don't use the decrypted boot.img and don't flash the twrp.img yet. Once all necessary images have been flashed issue the reboot-booloater command one more time, then on the bootloader screen choose the reboot option. Wait anywhere from 3-10 minutes for the phone to load. Let us know how it goes for you.

blitzkriegger said:
Hey there. First off make sure to unlock again your bootloader. Then you may follow post # 10 of @Heisenberg 's flashing guide for our device.
First images to flash would be bootloader and radio. First flash bootloader, then make sure to issue the command adb reboot-bootloader. Then afterwards once the phone has rebooted back to bootloader, flash radio, then again do the adb reboot-bootloader again.
Once the phone is again back to bootloader flash the rest of the images except userdata. For the boot.img and recovery.img, flash the stock ones-don't use the decrypted boot.img and don't flash the twrp.img yet. Once all necessary images have been flashed issue the reboot-booloater command one more time, then on the bootloader screen choose the reboot option. Wait anywhere from 3-10 minutes for the phone to load. Let us know how it goes for you.
Click to expand...
Click to collapse
Hello and thank you for helping.
I tried this method a couple of minutes ago. I flashed them this same way
fastboot flash bootloader C:\angler\images\bootloader-angler-angler-xx.xx.img
fastboot reboot-bootloader
fastboot flash radio C:\angler\images\radio-angler-angler-xx.xx.img
fastboot reboot-bootloader
fastboot flash boot C:\angler\images\boot.img
fastboot erase cache
fastboot flash cache C:\angler\images\cache.img
fastboot flash recovery C:\angler\images\recovery.img
fastboot flash system C:\angler\images\system.img
fastboot flash vendor C:\angler\images\vendor.img
It does the same exact thing it will try and restart the phone, the message that says it can't be checked for corruption the google logo comes up and it repeats it self non stop.
This is what doesn't make sense to me.
This is the file that I had flashed through twrp when it was working fine
Leviticus 1.3 - http://forum.xda-developers.com/android/software/r-s-e-sound-systems-auditory-research-t3379709

edgarted said:
Hello and thank you for helping.
I tried this method a couple of minutes ago. I flashed them this same way
fastboot flash bootloader C:\angler\images\bootloader-angler-angler-xx.xx.img
fastboot reboot-bootloader
fastboot flash radio C:\angler\images\radio-angler-angler-xx.xx.img
fastboot reboot-bootloader
fastboot flash boot C:\angler\images\boot.img
fastboot erase cache
fastboot flash cache C:\angler\images\cache.img
fastboot flash recovery C:\angler\images\recovery.img
fastboot flash system C:\angler\images\system.img
fastboot flash vendor C:\angler\images\vendor.img
It does the same exact thing it will try and restart the phone, the message that says it can't be checked for corruption the google logo comes up and it repeats it self non stop.
This is what doesn't make sense to me.
This is the file that I had flashed through twrp when it was working fine
Leviticus 1.3 - http://forum.xda-developers.com/android/software/r-s-e-sound-systems-auditory-research-t3379709
Click to expand...
Click to collapse
This is weird. What version of the stock factory images did you flash? I've been using leviticus 1.3 since it came out and when i was still on stock rom. I switched over to cm builds and have been flashing every nightly since the 7/24th build, and in the process repeatesly reflashing the aound mod along, and i've had zero issues with the phone booting afterwards.