[Q] Bricked NG2 - Sprint Samsung Galaxy S 4 Q&A, Help & Troubleshoot

Obviously, I'm a noob.
I have the L720VPUFNG2.
Can someone please tell me which stock ROM to download and possibly provide a link? I rooted and while doing the hotspot tweak changed the services files. I made a backup of both, seems kind of useless when it bricked to the sprint splash and I cannot access them to switch to the original files. I wasn't sure what version of the services files to get and must have gotten the wrong ones.
Help would be greatly appreciated.

You need to post more information. Can you boot into recovery? If not, have you tried to boot into download mode? If you can get into recovery, mount your usb in recovery, flash a nandroid (backup) to get your phone working again. If you do not have a backup, connect your phone to your computer, mount your usb in recovery and trasnfer a rom to your phone and flash it.
If you cannot get into recovery, I would download Odin and the NG2 tar file. Boot into download mode and Odin the tar file to get back to stock. I want to say I have seen a few experimental tar files on here. This is what I would do, no guarantees.
I do not mean to kick you while you are down but if you do not know what you are doing, don't do it. You have to read read read and read some more before you do any of this.

cconrad12 said:
Obviously, I'm a noob.
I have the L720VPUFNG2.
Can someone please tell me which stock ROM to download and possibly provide a link? I rooted and while doing the hotspot tweak changed the services files. I made a backup of both, seems kind of useless when it bricked to the sprint splash and I cannot access them to switch to the original files. I wasn't sure what version of the services files to get and must have gotten the wrong ones.
Help would be greatly appreciated.
Click to expand...
Click to collapse
You should have made a nandroid backup of the newly installed NG2 rom....if you did, just boot to recovery and reflash that nandroid.
If you didn't make a backup, download one of the 2 roms from this post http://forum.xda-developers.com/showpost.php?p=54807917&postcount=36 made by mxmr and flash through recovery. They are both stock rooted NG2 roms....one odexed and one deodexed.
This is your only options at this point as there is not yet an Odinable NG2 tar file. Only a tar for the NG2 modem.

Related

So I think I (soft bricked) my phone

I just bought a T-Mobile variant of the SGS3. I then successfully rooted it with the Toolkit from here:
http://forum.xda-developers.com/showthread.php?t=1746682
Then, when I used to toolkit to remove the boot animations. This is when trouble starts. Now the phone flashes the Samsung Logo when I try and turn it on, but nothing else happens. I can get into download mode still.
What should I do next? I tried re flashing through Odin the insecure boot, but that hasn't work. I'm in the proscess of downloading the stock firmware tarball (from here: http://forum.xda-developers.com/showthread.php?t=1737855 ) but its PAINSTAKINGLY slow. Do you expect flashing back to stock via Odin to unbrick me?
I'm used to flashing roms and whatnot but I'm not a dev... this caught me totally off guard since I thought I was using the S3 toolkit properly (and yes, it is the correct toolkit. I rooted successfully).
I made a nandroid right off the bat, but I can't boot into recovery and I don't think I can access the files any other way.
Thanks for any help. I'm in a panic right now
andham95 said:
I just bought a T-Mobile variant of the SGS3. I then successfully rooted it with the Toolkit from here:
http://forum.xda-developers.com/showthread.php?t=1746682
Then, when I used to toolkit to remove the boot animations. This is when trouble starts. Now the phone flashes the Samsung Logo when I try and turn it on, but nothing else happens. I can get into download mode still.
What should I do next? I tried re flashing through Odin the insecure boot, but that hasn't work. I'm in the proscess of downloading the stock firmware tarball (from here: http://forum.xda-developers.com/showthread.php?t=1737855 ) but its PAINSTAKINGLY slow. Do you expect flashing back to stock via Odin to unbrick me?
I'm used to flashing roms and whatnot but I'm not a dev... this caught me totally off guard since I thought I was using the S3 toolkit properly (and yes, it is the correct toolkit. I rooted successfully).
I made a nandroid right off the bat, but I can't boot into recovery and I don't think I can access the files any other way.
Thanks for any help. I'm in a panic right now
Click to expand...
Click to collapse
Btw, I have the original build.prop backed up
Try this. http://forum.xda-developers.com/showthread.php?t=1762204
Should get you back to stock rooted. Grab file, put on desktop, extract here, fire Odin up, click pda an find the .tar file and hit start. Should get you back to stock rooted.
EDIT: OPPS! I just noticed this is for tmobile.. anyhow just grab a stock rooted .img/.tar file and run it in Odin. should get you back to stock rooted.
eastwood1 said:
Try this. http://forum.xda-developers.com/showthread.php?t=1762204
Should get you back to stock rooted. Grab file, put on desktop, extract here, fire Odin up, click pda an find the .tar file and hit start. Should get you back to stock rooted.
EDIT: OPPS! I just noticed this is for tmobile.. anyhow just grab a stock rooted .img/.tar file and run it in Odin. should get you back to stock rooted.
Click to expand...
Click to collapse
Thanks for the reply, but I already got it working! I got it back in to recovery after I flashed the insecure boot image via Odin again (the one that came with the S3 toolkit) and restored my nandroid.
And (to all) sorry for the newb post, I was in total panic mode, heart pounding, adrenalin rushing, it was intense haha. Its hard to think straight like that.

curious about a few things

So I'm kinda a newbie to flashing ROMs I just got a galaxy s4 back in November and the official kit kat update killed my expirence with the s4 so I got a refurbished s4 with mk2 baseband and from what I've read the bootloader was locked. I'm on sprint but I've been flashing away like no tomorrow and yes I've been making nandroid backups and everything incase something goes wrong. (I've soft bricked my phone 4 times) but I'm just curious on how to get back to my stock mk2 rom? I've tried restoring my backup from twrp and can't get it to boot it just get stuck in a bootloop. Any help would be really nice.
how to get back to my stock mk2 rom?
Click to expand...
Click to collapse
Use the MK2 tar found in these forums.
leaderbuilder said:
Use the MK2 tar found in these forums.
Click to expand...
Click to collapse
Thing is I only have access to my phone. I don't have a PC I use my phone and my gfs phone to do stuff. Is there anyway to download a flashable zip and install through twrp
poopet22 said:
Thing is I only have access to my phone. I don't have a PC I use my phone and my gfs phone to do stuff. Is there anyway to download a flashable zip and install through twrp
Click to expand...
Click to collapse
If you REALLY want a complete wiped stock phone you'll need a PC (or Mac if you use Heimdall).
If you want to try something (with NO garuantees that'll work and not brick your phone!) you can try Mobile Odin Pro. It'll flash .tars BUT it will not flash the modem. And, like I said it may not work or worse.
So...
Find a PC, download PC Odin 3.07 (or 3.09), Downlaod the tar. Run Odin as administrator and then flash phone. DONE.

[Q] Need help flashing stock firmware back to 900A via Odin

Basically I attemped to flash my phone to a custom rom. Now the phone only boots into safestrap and will not accept any roms I am trying to flash at all.
I downloaded ODIN but I am having a heck of a time trying to find the proper files for flashing back to stock firmware. If anyone could provide some insight it would be greatly appreciated
Need a working link to N900AUCUCNC2_N900AATTCNC2_N900AUCUCNC2_HOME.tar.md
B.rick said:
Basically I attemped to flash my phone to a custom rom. Now the phone only boots into safestrap and will not accept any roms I am trying to flash at all.
I downloaded ODIN but I am having a heck of a time trying to find the proper files for flashing back to stock firmware. If anyone could provide some insight it would be greatly appreciated
Click to expand...
Click to collapse
I came to the conclusion that i need to flash N900AUCUCNC2_N900AATTCNC2_N900AUCUCNC2_HOME.tar.md via AP in odin, but I cant find a working download link anywhere

[Q] Need stock rom and flashing method i9506

Hello there..
I have a Galaxy s4 lte qualcomm 4g.
Flashed cm11 4.4.4
CyanogenMod Version : 11-20150102-unofficial-ks01lte
Base-band : i9506XXUCNJ1
Recovery : Philz touch recovery 6.x.x.x
I want to revert back to stock android touch-wiz 4.4.2 but unable to find the Odin flash-able file or cwm flash file.
Can anyone give some clear instruction on how to go back to stock and download sources ????
Any help would be greatly appreciated.
born_high said:
Hello there..
I have a Galaxy s4 lte qualcomm 4g.
Flashed cm11 4.4.4
CyanogenMod Version : 11-20150102-unofficial-ks01lte
Base-band : i9506XXUCNJ1
Recovery : Philz touch recovery 6.x.x.x
I want to revert back to stock android touch-wiz 4.4.2 but unable to find the Odin flash-able file or cwm flash file.
Can anyone give some clear instruction on how to go back to stock and download sources ????
Any help would be greatly appreciated.
Click to expand...
Click to collapse
Download Sources and flashing procedure are here thanks to @DeHAWK
http://forum.xda-developers.com/showthread.php?t=2597058
next time search in the forums before creating new threats its against xda rules
bryanfeanor said:
Download Sources and flashing procedure are here thanks to @DeHAWK
http://forum.xda-developers.com/showthread.php?t=2597058
next time search in the forums before creating new threats its against xda rules
Click to expand...
Click to collapse
Well i kind of know the rules of XDA.
But here's the catch, i have tried that method mentioned above.
Downloaded the .tar file and flashed via Odin. And now my phone is stuck on Samsung logo forever.
That's why posted here.
Here's some screenshots of odin
born_high said:
Well i kind of know the rules of XDA.
But here's the catch, i have tried that method mentioned above.
Downloaded the .tar file and flashed via Odin. And now my phone is stuck on Samsung logo forever.
That's why posted here.
Here's some screenshots of odin
Click to expand...
Click to collapse
Hey
You are only flashing a kernel...not a full 4.4.2 original image.
And that's why you're stock on the boot logo.
Regards.
born_high said:
Well i kind of know the rules of XDA.
But here's the catch, i have tried that method mentioned above.
Downloaded the .tar file and flashed via Odin. And now my phone is stuck on Samsung logo forever.
That's why posted here.
Here's some screenshots of odin
Click to expand...
Click to collapse
For the complete image, you can get from here:
http://samsung-updates.com/device/?id=GT-I9506
or here:
http://www.sammobile.com/firmwares/database/GT-I9506/
born_high said:
Well i kind of know the rules of XDA.
But here's the catch, i have tried that method mentioned above.
Downloaded the .tar file and flashed via Odin. And now my phone is stuck on Samsung logo forever.
That's why posted here.
Here's some screenshots of odin
Click to expand...
Click to collapse
As mentioned you are flasing only kernel, i use odin 1.85
stock 5.0.1 roms mega mirrors http://forum.xda-developers.com/gal...06-lolipop-official-samsung-firmware-t3023794 thanks to @Mar10
and tar files from 4.4.2 open nordic countries thanks to @DeHAWK
XXUCNJ11 https://mega.co.nz/#!cNE3nDSB!zjPWcM7OI-ltonzAuMKDdREinHr6ilm-ZBg0oqxD2k8
XXUCNI1 https://mega.co.nz/#!1EtAWTQB!zHVAwXe3odz6ipvhZmpdSXUnTKy1w_oYRpRlRMRa6DQ
take the battery out wait 5-10 secs and enter to download mode to avoid modem issues.
its not recomendable but if you have a backup of a pit file for your phone select it and thick re-partition, this is dangerous but may help with bootloop only if flashing the firmware with no repartition work, repartition with out a pit file may brick your device.
bryanfeanor said:
As mentioned you are flasing only kernel, i use odin 1.85
stock 5.0.1 roms mega mirrors http://forum.xda-developers.com/gal...06-lolipop-official-samsung-firmware-t3023794 thanks to @Mar10
and tar files from 4.4.2 open nordic countries thanks to @DeHAWK
XXUCNJ11 https://mega.co.nz/#!cNE3nDSB!zjPWcM7OI-ltonzAuMKDdREinHr6ilm-ZBg0oqxD2k8
XXUCNI1 https://mega.co.nz/#!1EtAWTQB!zHVAwXe3odz6ipvhZmpdSXUnTKy1w_oYRpRlRMRa6DQ
take the battery out wait 5-10 secs and enter to download mode to avoid modem issues.
its not recomendable but if you have a backup of a pit file for your phone select it and thick re-partition, this is dangerous but may help with bootloop only if flashing the firmware with no repartition work, repartition with out a pit file may brick your device.
Click to expand...
Click to collapse
Thank you for the reply
I will give it a try and let you know the results.
One more noob question..
I did a back up of my touchwiz before converting to CM.
And i got the back up file as normal file folder instead a zip file.
I wonder if there is a way to restore it.
I already tried zipping it and restoring from philz recovery...but it says bad file.
Screenshots of Backup :
born_high said:
One more noob question..
I did a back up of my touchwiz before converting to CM.
And i got the back up file as normal file folder instead a zip file.
I wonder if there is a way to restore it.
I already tried zipping it and restoring from philz recovery...but it says bad file.
Screenshots of Backup :
Click to expand...
Click to collapse
you´re welcome.
did you do the backup from philz recovery? i never did a backup from recovery, only with titanium, so i really dont know, but to restore a backup needs to be done from the same source that the backup was created. for the screen shots looks like a CWM recovery backup good luck.
bryanfeanor said:
you´re welcome.
did you do the backup from philz recovery? i never did a backup from recovery, only with titanium, so i really dont know, but to restore a backup needs to be done from the same source that the backup was created. for the screen shots looks like a CWM recovery backup good luck.
Click to expand...
Click to collapse
sLIGHTLY RE-eDIT OF PREVIOUS POST :
yes its a cwm backup file created with philz..
And i was able to restore it via the recovery under restore oiption.
but after the first samsung screen (samsung galaxy s4) and a blue T logo, it gets struck on the third screen with only samsung written on it with a solid blue led.
(( what the heck am i doing wrong.
Anyway i flashed the full image with odin..(taken from your link).
And back to touchwiz again.
Thanks a lot.
One more thing is, it changed my baseband version a bit.
Build number : I9506XXUCNJ1
bASEBAND vERSION : I9506XXUCNF3
IS THAT A PROBLEM ?
BEST REGARDS.
born_high said:
sLIGHTLY RE-eDIT OF PREVIOUS POST :
yes its a cwm backup file created with philz..
And i was able to restore it via the recovery under restore oiption.
but after the first samsung screen (samsung galaxy s4) and a blue T logo, it gets struck on the third screen with only samsung written on it with a solid blue led.
(( what the heck am i doing wrong.
Click to expand...
Click to collapse
T logo?
well the backup is from another build xxucnj2 from the screen shots,try restoring only data in adavance restore option or reflash this
http://www.sammobile.com/firmwares/download/39412/I9506XXUCNJ2_I9506TELCNJ1_TEL.zip/ and try again, you may have to create an account to download the file is free,
bryanfeanor said:
T logo?
well the backup is from another build xxucnj2 from the screen shots,try restoring only data in adavance restore option or reflash this
http://www.sammobile.com/firmwares/download/39412/I9506XXUCNJ2_I9506TELCNJ1_TEL.zip/ and try again, you may have to create an account to download the file is free,
Click to expand...
Click to collapse
Sorry to bother you again.
But i am facing a new kinda problem now with custom recoveries.
After flashing NEE-I9506XXUCNJ1-20141114075501 yesterday it got auto updated to 5.0.1 lollipop .
Now i am stuck with stock recovery.
Tried to flash philz 6.x.x.x as before with odin. The odin process completes itself and reboots the phone.
But when i try to get into recovery still its booting in stock recovery.
Any solution on how can i flash custom recovery on this ?
Additional info
Baseband version : I9506XXUDOA6
bUILD NUMBER : LRX22C. I9506XXUDOA6
Flash your Favorite Custom Recovery with Odin 3.xx and put it to AP. Check that Auto Reboot isn't marked. After successful flashing your Phone won't to reboot. USB Cable out and put your Battery out and wait few seconds. Put your Battery in and reboot it to Recovery. The Stock Recovery can't now overwrite the Custom Recovery.
born_high said:
Sorry to bother you again.
But i am facing a new kinda problem now with custom recoveries.
After flashing NEE-I9506XXUCNJ1-20141114075501 yesterday it got auto updated to 5.0.1 lollipop .
Now i am stuck with stock recovery.
Tried to flash philz 6.x.x.x as before with odin. The odin process completes itself and reboots the phone.
But when i try to get into recovery still its booting in stock recovery.
Any solution on how can i flash custom recovery on this ?
Additional info
Baseband version : I9506XXUDOA6
bUILD NUMBER : LRX22C. I9506XXUDOA6
Click to expand...
Click to collapse
in lollipop i used TWRP recovery (TWRP_2.8.4.0_ks01lte_20150207.tar.md5)https://www.mediafire.com/folder/p3rwwfm7xn76x/TWRP flashed with odin 1.85 no problems.
but after rooting with cf autoroot http://download.chainfire.eu/502/CF-Root/CF-Auto-Root/CF-Auto-Root-ks01lte-ks01ltexx-gti9506.zip( extract and flash with odin in pda) because cf autorrot flash stock recovery after rooting.
Important after rooting flash immediately custom recovery, if you boot in stock recovery after root all apps will force close and you will need to wipe data (stock recovery wipe data will delete internal memory as well), so do not boot in stock recovery.
bryanfeanor said:
in lollipop i used TWRP recovery (TWRP_2.8.4.0_ks01lte_20150207.tar.md5)https://www.mediafire.com/folder/p3rwwfm7xn76x/TWRP flashed with odin 1.85 no problems.
but after rooting with cf autoroot http://download.chainfire.eu/502/CF-Root/CF-Auto-Root/CF-Auto-Root-ks01lte-ks01ltexx-gti9506.zip( extract and flash with odin in pda) because cf autorrot flash stock recovery after rooting.
Important after rooting flash immediately custom recovery, if you boot in stock recovery after root all apps will force close and you will need to wipe data (stock recovery wipe data will delete internal memory as well), so do not boot in stock recovery.
Click to expand...
Click to collapse
You are a life saver man, you know that .
I will give it a shot and let you know the results.
Phew finally its done...
Thank you guys for keeping up with my noob questions.
happy Androiding
born_high said:
Phew finally its done...
Thank you guys for keeping up with my noob questions.
happy Androiding
Click to expand...
Click to collapse
You´re welcome, we all were noobs, and in somethings we still are, thats the best part of this, something new comes everytday so much to learn and do.

New $600 paper weight

So my brand new SD care went corrupt while I had a lot of programs running from it... By means of Link2SD app I put system files on there too and now I get
E:failed to mount /system (Invalid argument)
I can't seem to fix this problem and it doesn't seem that this problem arises very often because I have found nothing in searching. Any help would be great... I don't want to have to put a hammer to it and then call Asurion for a replacement..... but that does sound fun lol.
I have tried to Odin everything I have in my backups but not sure if any of those are actually the original rom. I have been trying to figure out how to Odin CM or TWRP on to it... or get them install in some form with out the APK. I saw something about them being able to fix the issue.
Have you tried using ODIN and flashing back to a fresh, stock ROM?
I forgot to put all that. I have tried to Odin everything I have in my backups but not sure if any of those are actually the original rom. I have been trying to figure out how to Odin CM or TWRP on to it... or get them install in some form with out the APK. I saw something about them being able to fix the issue.
Our phones do not support CM or TWRP because we have a locked bootloader. You are on a Verizon G900V, right?
Here's a link to a post with stock ROMs you can Flash via Odin. Choose the appropriate one for the version you want and Flash. Make sure you back up anythibg you want to save.
http://forum.xda-developers.com/showthread.php?t=2784880
It doesn't matter what I flash I get the same error. The other things I have found say that the system and/or EFS needs to be re-made so to speak. TWRP has a command that does it and CM allows you to go in though ADB and do it..... That is the best I have found for answers so far. I don't see anything for FlashFire or SuperUser.
Flash using ODIN not FlashFire or anything else.
I have flashed with Odin.... I get no where.... doesn't matter what kernel I use or ROM or anything.... I was saying that the people that have solved this porblem before are using CW or TWRP to access the ADB to send commands for the phone to re-setup the system/EFS
Did you Flash the pit file on the page I linked earlier? That should repartition everything.
Still the same problem
So I just kept flashing tar files from the post above and finally the NI2 took along with the pit file. Thanks for your help @btonetbone
Eventually the NI2 + .pit file being flashed together fixed the problem.

Categories

Resources