Related
Hello...just wondering about an option in the Hermes if some one could tell me about the caller ID settings.
Does it have all 3 options suchs as the following:
Send caller ID to every one
Send only to Contact ( this is this the option I have seen in Smart phones but not in windows pocket pc smart phones)
Send to no one
If some one would be so kind enough to answer this it would be greatly apperciated
Hi Geek,
I don't think there are any settings in the phone to do this but it can be done manually.
There are 2 network enabled settings you can have setup by requesting them from your phone - CLIP and CLIR; CLIP is Calling Line Identity Presentation (show ID - also called CLI) and CLIR is Calling Line Identity Restriction (hide ID). These are done by sending *#30# and *#31# to the network respectfully. It's worth knowing not all network support CLIR.
So if you send *#30# to the network you will enable CLIP and everyone will see your ID. If you send *#31# to the network your ID will be hidden from everyone. your network should say 'accepted', 'enabled' or something similar if it accepts the request.
That covers 2 of your points. Now for the 3rd. If you have CLIP enabled (*#30# - everyone sees your ID) and you wish to hide your number from some people then you dial the number like #31#<number> SEND.
If you do it the other way and leave CLIR enabled (*#31# - no one sees your ID) then dial the number *31#<number> SEND.
Hope this helps.
Gav.
Hi,
I'm using often companies like justvoip or voipcheap to call abroad. First you call a landline number in UK and then you type in the number you want to call. For example first you dial 01617002727, then you dial 007123456789#. Would it be possible to dial the number from contacts and it would automaticaly dial 01617002727 before? Thanks in advance
best regards
you can try to use FRING, i'm just use this software with voipbuster and voipcheap and i call the contact directly from my sim card without type any other number before
Fring doesn't work without the internet connection. Do you use voipcheap over 3G or you dial a local landline number?
best regards
i use frig over 3g and over wi-fi
MagiCall will do it.
I've tried magicall but it doesn't work. Probably it has to wait until you hear "welcome bla bla" before you dial the number
Maby you can use WM client sip solution, but it works only on speaker.
I use it to connect via 3G to my Asterix Pbx from home.
I think you can find a cab somewhere , but be careful to take the one witch doesn't affect your gps.
You might be able to add 01617002727p007123456789# or 01617002727,007123456789# in your contacts where the p is a pause.
magicalls works perfectly for me. From FAQ:
Most calling cards work in this way:
1. Dial the access number
2. Listen to the voice instructions
3. Enter your card number
4. Wait for a while
5. Enter your PIN number
6. Wait for a while
7. Enter the destination number
You may create outgoing rules like the following in MagiCall to automatically apply calling cards to the destination number.
Rule type: Outgoing call
Filter type: Specific number (You may select any filter type you like)
Phone #: +* (I want to filter international calls)
Action1: Change number
Call to: 8000,,1234,,666,,{phone}#
In the rule above, my calling card's access number is 8000, card number is 1234, PIN is 666. Each comma ',' is used to pause for a second. {phone} is a placeholder which represents the destination number. If you need to pause longer, add more commas. (See attached pictures)
Hi All,
how to deactivate international call barring. I tried to deactivate it in HTC hero. But it asks a password. I asked my network operator O2 (Germany). They said, that the password is set by HTC. But I checked the HTC manual and googled, I have not the password yet.
Does anybody know this password?
Best regards from Munich
BS. theres no such password set by HTC, so it must be o2.
No bar on making international calls on my Uk Hero either. And at what Orange charge me for them I am sure they want me to make as many as I can
Or do you mean roamimg, i.e. using the phone when abroad? If so then often networks block that.
What steps did you take to try to activate international calling, because I have never even seen an option on my phone for doing that
peterc10 said:
What steps did you take to try to activate international calling, because I have never even seen an option on my phone for doing that
Click to expand...
Click to collapse
Settings > Call Settings > Call Barring > Outgoing International
Settings > Call Settings > Call Barring > Outgoing International Roaming
stanleyxu2005 said:
Settings > Call Settings > Call Barring > Outgoing International
Settings > Call Settings > Call Barring > Outgoing International Roaming
Click to expand...
Click to collapse
Is the "outgoing international" box got a green tick against it? If not then the outgoing international calls are NOT called barred. On mine the ones above headed "all outgoing" and the one below headed "all incoming" are the same - i.e. with no green tick in the box and "disable" underneath. So on mine there are no bars.
But when I click on it it asks me to provide a password so that I can set up call barring, not so that I can get rid of it.
If any of the boxes have a green tick and you did not put it there then somebody has probably barred the calls and put their own password in. Since this is something that the user can do I do not think it will be HTC who will have done it
if it asks for a password, this is usually limited by the PIN2 on the SIM. This is set by the network and not by HTC.
If this is what you have got, with the ticks and everything, ask the network for the PIN2 of your SIM. They should be able to provide it as most networks set it to a default value, just as they do the standard PIN.
if you can not work around it..
You can look at calling cards.. which will save you money in the long run.
The calls are considered local calls on Calling cards.
just an idea....
good luck
Ok, so just got my X2...
Video calling works great, however I noticed a new option/feature:
selecting a contact you can choose a) video call which initiates a video call
or b) Video Gateway call
I chose video gateway and it says I need to configure my video gateway, went into the options and it looks like its expecting an IP or DNS host?
Any idea what this is?
WHERE is that EXACTLY ?
I have only Multimedia Gateway and if selecting Settings, only a field to input a name comes up. Nothing else!
And in options field video call and video gateway is greyed out. When exactly do you get this on your end?
Are you in Canada and do you have 3G for videocall? I am in the U.S. of A. and here is no such thing. Perhaps that is the reason???
michaelthemage said:
WHERE is that EXACTLY ?
I have only Multimedia Gateway and if selecting Settings, only a field to input a name comes up. Nothing else!
And in options field video call and video gateway is greyed out. When exactly do you get this on your end?
Are you in Canada and do you have 3G for videocall? I am in the U.S. of A. and here is no such thing. Perhaps that is the reason???
Click to expand...
Click to collapse
Yes we have 3G video calling.
I can video call fine, but when I hold down and get the menu when selecting a contact, I can Video call, and Video Gateway call. when i hit Video gateway it tells me I need to configure the gateway, when the option opens, I beleive it's actually "Multimedia Gateway" (they probably screwed up on wording).
Wow, so cool! Canada much more advanced the the U.S. of A. ! Must be really cool to do videocall.
And yes, it is called Multimedia Gateway. But I cannot get into setting since it will connect to the Provider, in my case T-Mobile, and of course since we don't have here videocalling, nothing comes up but ERROR.
Too bad
But good luck to you and Happy VideoCalling
michaelthemage said:
Wow, so cool! Canada much more advanced the the U.S. of A. ! Must be really cool to do videocall.
And yes, it is called Multimedia Gateway. But I cannot get into setting since it will connect to the Provider, in my case T-Mobile, and of course since we don't have here videocalling, nothing comes up but ERROR.
Too bad
But good luck to you and Happy VideoCalling
Click to expand...
Click to collapse
Here (in Italy ) we have the video call service since AD 2003, but I never had that option in any [video]phone I tested
Yeah, in Europe there is videocalling a loooooooong time
I suspect that this 'gateway' option / setting is for somehow using WiFi for a videocall instead of the network provider!
We have here in the U.S. some phones coming out now with a 2nd cam for video calls but on a provider that does NOT offer 3G videocall. They have a gateway using WiFi hotspots for that. But again, just came out so I don't know if anyone here used it. VideoCall in the U.S. of A. is tooooo much Future!
Well after doing some research on the internet, it almost seems as if there are things called "Video Gateways" that allow Video calling to devices other than cellular networks.
Looks like these video gateyways actually take the voice and video codec and change it so that 2 way video calling between Mobile phone <===> SIP VoIP phone or ISDN video phones can talk.
Kinda cool!
I read a post by smachine detailing how to do this a few weeks back and it seemed so simple, I thought I'd try it. And it was! I wish I had done this months and months ago; unlimited calling over wifi and 3G, so easy! His original post is here: http://forum.xda-developers.com/showpost.php?p=8813244&postcount=18
This is so awesome I thought I'd start a new thread on this for others to see, and make a little guide out of it for easy reading / bulleted-format. The entire process should only take around 15 minutes. Here goes:
[Edit 11/23]: Added CSipSimple setup info and link for Sipgate setup
--------------------------------------------------
Get a SIP Account:
A) Purchase a Gizmo5 account (eBay around $5 to $10). (I purchased from buildfruitkit.)
B) [Edit 11/23]: Or try a free SipGate account (Note: I haven't tested this but might be worth a try before buying a Gizmo5 account.)
Log into https://my.gizmo5.com -> Change email -> Change password -> Write down your Sip Number
On PC: www.google.com/voice -> Voice Settings -> Add another phone
Name: SIP
Number: Your Sip Number (no "1" beforehand)
Phone Type: Gizmo
Save
Verify the number (click Connect, it will call, Sipdroid will ring, enter the two numbers)
You now have free incoming calls! Yay!
On phone: Download CSipSimple OR Sipdroid from the Android Market:
CSipSimple (Seems to be better than Sipdroid) [Added 11/23]:
Open app. Wait for files to download
"Easy Configuration" Screen:
"Integrate with Android": Leave checked
Availability Profile: Choose based on preference
"I'm allowed to use mobile": Check this if you want to call over 3G
Add Account:
Select Sipgate or Generic Wizards -> Basic
Account name: Anything (I put "Gizmo")
User: Your full sip number (including 1 beforehand)
Server: proxy01.sipphone.com
Password: Your Gizmo password
It should show up in the accounts list as Green and Registered
Sipdroid:
Open App -> Settings -> SIP Account
Authorization Username: Your Sip Number (including a "1" beforehand)
Password: Your Gizmo password
Server or Proxy: proxy01.sipphone.com
Username or Caller ID: Your Sip Number again (including a "1" beforehand)
Port: 5060
Settings -> Advanced Options
Use STUN Server: Check this box
STUN Server name: stun01.sipphone.com
STUN Server port: 3478
(Optional: if you find calls too quiet) Sipdroid -> Settings -> Audio/Video -> Earpiece Gain -> High or Highest
For outgoing calls, download "Google Voice Callback FREE" from the Android Market (no need to purchase Gizmo5 credit)
A) Sign in with your Google username/password.
B) Choose your callback number (select Gizmo), and select "Ask every time" or "Always (when possible)" based on your preference.
Calling:
A) Incoming calls: These should be routed through CSipSimple/Sipdroid (as long as the app is running).
B) Outgoing calls: Use the stock dialer. GV Callback Free should pop up -> Tell it to call you back. This will make it act as an incoming call just like A)
Hope this helps others out there.
Paul22000 said:
I read a post by smachine detailing how to do this a few weeks back and it seemed so simple, I thought I'd try it. And it was! I wish I had done this months and months ago; unlimited calling over wifi and 3G, so easy! His original post is here: http://forum.xda-developers.com/showpost.php?p=8813244&postcount=18
This is so awesome I thought I'd start a new thread on this for others to see, and make a little guide out of it for easy reading / bulleted-format. I've done this twice now (for my girlfriend -- we just got an Android phone yesterday ) so I wrote this down the second time around. The entire process should only take around 15 minutes. Here goes:
Get a Gizmo5 account (eBay around $5 to $10). (I bought both of mine from "buildfruitkit" and received an email with the account literally within seconds.)
Log into https://my.gizmo5.com -> Change email -> Change password -> Write down your Sip Number
On phone: Download Sipdroid from the Android Market. Open Settings -> SIP Account
A) Authorization Username: Your Sip Number (including a "1" beforehand)
B) Password: Your Gizmo password
C) Server or Proxy: proxy01.sipphone.com
D) Username or Caller ID: Your Sip Number again (including a "1" beforehand)
E) Port: 5060
Sipdroid -> Settings -> Advanced Options
A) Use STUN Server: Check this box
B) STUN Server name: stun01.sipphone.com
C) STUN Server port: 3478
(Optional: if you find calls too quiet) Sipdroid -> Settings -> Audio/Video -> Earpiece Gain -> High or Highest
On PC: www.google.com/voice -> Voice Settings -> Add another phone
A) Name: SIP
B) Number: Your Sip Number (no "1" beforehand)
C) Phone Type: Gizmo
D) Save
E) Verify the number (click Connect, it will call, Sipdroid will ring, enter the two numbers)
F) You now have free incoming calls! Yay!
For outgoing calls, download Google Voice Callback FREE from the Android Market
A) Sign in with your Google username/password.
B) Choose your callback number (Gizmo), and select "Ask every time" or "Always (when possible)" based on your preferences (I have it set to always).
Hope this helps others out there.
Click to expand...
Click to collapse
This is why your one of my favorite posters on the forum and I highly respect your opinion Paul. You always make great, detailed posts that really help the community here so thank you
Also check out this
http://n1blog.ed-pages.com/?p=17
If you want to drop voice altogether you can combine this with T-mobiles $40 Unlimited data/email plan: http://www.t-mobile.com/shop/plans/...l-phone-plan&WT.z_shop_plansLP=Internet_email
JCopernicus said:
If you want to drop voice altogether you can combine this with T-mobiles $40 Unlimited data/email plan: http://www.t-mobile.com/shop/plans/...l-phone-plan&WT.z_shop_plansLP=Internet_email
Click to expand...
Click to collapse
I used to have this plan before they even had a month-to-month version of this data only plan. If you sign up for a 2yr version of it you also can get a AAA 15% discount (you can't get this on a month to month plan) so that you only pay $34/mo data only.
Im im UK...can i get free calls over wifi/3g?
Sent from my Nexus One using XDA App
Hey Paul, Do I only have free incoming calls when someone calls my sip number only ? or is it my tmo number and google voice numbers also.
Glad the guide is helping out people. Feels good knowing I helped out on these threads, as I have learned so much stuff here over the past month.
I used GV call free app, however lately the program sometimes doesnt dial out. Has anyone found an alternate callback app that works almost 100% of the time? I say that there was another app called google voice callback free, I might give that a shot.
Lamar720 said:
Hey Paul, Do I only have free incoming calls when someone calls my sip number only ? or is it my tmo number and google voice numbers also.
Click to expand...
Click to collapse
Its only the google voice number. If you have an incoming call and are in a bad data connection area/ no wifi you can press the back button and you can take the call using the tmobile network (as long as you set up call forwarding of your google voice number to tmobile number). You should just start telling all your close contacts your new google voice number. This sipdroid setup has been great for when i go to my relatives house who has next to 0 tmobile reception, I can just connect to wifi, and my then gets full reception. I used to really want tmobile UMA wifi calling, but now there is no need with this setup.
one question ,does it work if u make international calls or just the local call or us only....
walliester said:
one question ,does it work if u make international calls or just the local call or us only....
Click to expand...
Click to collapse
US I believe, but im not 100% sure.
Paul22000 said:
I read a post by smachine detailing how to do this a few weeks back and it seemed so simple, I thought I'd try it. And it was! I wish I had done this months and months ago; unlimited calling over wifi and 3G, so easy! His original post is here: http://forum.xda-developers.com/showpost.php?p=8813244&postcount=18
This is so awesome I thought I'd start a new thread on this for others to see, and make a little guide out of it for easy reading / bulleted-format. I've done this twice now (for my girlfriend -- we just got an Android phone yesterday ) so I wrote this down the second time around. The entire process should only take around 15 minutes. Here goes:
Get a Gizmo5 account (eBay around $5 to $10). (I bought both of mine from "buildfruitkit" and received an email with the account literally within seconds.)
Log into https://my.gizmo5.com -> Change email -> Change password -> Write down your Sip Number
On phone: Download Sipdroid from the Android Market. Open Settings -> SIP Account
A) Authorization Username: Your Sip Number (including a "1" beforehand)
B) Password: Your Gizmo password
C) Server or Proxy: proxy01.sipphone.com
D) Username or Caller ID: Your Sip Number again (including a "1" beforehand)
E) Port: 5060
Sipdroid -> Settings -> Advanced Options
A) Use STUN Server: Check this box
B) STUN Server name: stun01.sipphone.com
C) STUN Server port: 3478
(Optional: if you find calls too quiet) Sipdroid -> Settings -> Audio/Video -> Earpiece Gain -> High or Highest
On PC: www.google.com/voice -> Voice Settings -> Add another phone
A) Name: SIP
B) Number: Your Sip Number (no "1" beforehand)
C) Phone Type: Gizmo
D) Save
E) Verify the number (click Connect, it will call, Sipdroid will ring, enter the two numbers)
F) You now have free incoming calls! Yay!
For outgoing calls, download Google Voice Callback FREE from the Android Market
A) Sign in with your Google username/password.
B) Choose your callback number (Gizmo), and select "Ask every time" or "Always (when possible)" based on your preferences (I have it set to always).
Hope this helps others out there.
Click to expand...
Click to collapse
I actually finally got around to setting this up on my phone on Thursday using pretty much the same setup - great minds must truly think alike and all that jazz. I also installed the hacked sipdroid client from the author of Google Voice Callback Free, which allows the callback to be automatically answered by sipdroid. I don't have a great need for voip calling over 3g, so I took it a step further and established a Tasker profile to automatically set the third-party callback setting to "always if internet available" when the wifi state is connected, and left the app's setting on "Never". The Google voice app is still set to handle all outgoing calls, so calls happen as standard gvoice voice calls over the cellular network unless I have an active wifi connection, in which case they are voip calls.
Super easy and fully automated, and completely transparent to the party on the other end.
codesplice said:
I actually finally got around to setting this up on my phone on Thursday using pretty much the same setup - great minds must truly think alike and all that jazz. I also installed the hacked sipdroid client from the author of Google Voice Callback Free, which allows the callback to be automatically answered by sipdroid. I don't have a great need for voip calling over 3g, so I took it a step further and established a Tasker profile to automatically set the third-party callback setting to "always if internet available" when the wifi state is connected, and left the app's setting on "Never". The Google voice app is still set to handle all outgoing calls, so calls happen as standard gvoice voice calls over the cellular network unless I have an active wifi connection, in which case they are voip calls.
Super easy and fully automated, and completely transparent to the party on the other end.
Click to expand...
Click to collapse
Where did you find the hacked sipdroid client? Same settings as the normal sipdroid version? What exactly is the difference of the hacked client, is it just so you avoid having to swipe up during the callback?
mohsin125 said:
Im im UK...can i get free calls over wifi/3g?
Click to expand...
Click to collapse
Google Voice is US / Canada only I'm afraid
Lamar720 said:
Hey Paul, Do I only have free incoming calls when someone calls my sip number only ? or is it my tmo number and google voice numbers also.
Click to expand...
Click to collapse
Free calls to your Google Voice number. Your GV # will forward to your SIP number (or your T-Mobile number if you want). Don't worry, you don't need to give out your SIP number to anyone.
smachine said:
Glad the guide is helping out people. Feels good knowing I helped out on these threads, as I have learned so much stuff here over the past month.
I used GV call free app, however lately the program sometimes doesnt dial out. Has anyone found an alternate callback app that works almost 100% of the time? I say that there was another app called google voice callback free, I might give that a shot.
Click to expand...
Click to collapse
Yeah, I def wouldn't have known about this. Thanks of course.
I tried the GV Call Free app and yeah, it would never connect for me. That's why I switched over to Google Voice Callback. That one worked right away for me.
smachine said:
Where did you find the hacked sipdroid client? Same settings as the normal sipdroid version? What exactly is the difference of the hacked client, is it just so you avoid having to swipe up during the callback?
Click to expand...
Click to collapse
The app says it on the Settings screen (screenshot attached).
The link is on the author's website: http://musingsfromtheunderground.blogspot.com/
Or more specifically: http://code.google.com/p/google-voice-callback-for-android/downloads/list
Paul22000 said:
The app says it on the Settings screen (screenshot attached).
The link is on the author's website: http://musingsfromtheunderground.blogspot.com/
Or more specifically: http://code.google.com/p/google-voice-callback-for-android/downloads/list
Click to expand...
Click to collapse
Yep, that's the one. The author says it was hacked to allow the Gvoice Callback app more access to the sip client under the hood. The main difference is the ability to auto-answer a callback from your Google voice number. It is based on an older version of sipdroid, but it seems to work beautifully for me.
codesplice said:
Yep, that's the one. The author says it was hacked to allow the Gvoice Callback app more access to the sip client under the hood. The main difference is the ability to auto-answer a callback from your Google voice number. It is based on an older version of sipdroid, but it seems to work beautifully for me.
Click to expand...
Click to collapse
Does the older hacked version of sipdroid cancel the default tmobile ringing when the call is answered (Google voice number is forwarded to ring standard tmobile network)? I believe that feature was added on the newer versions. It would be kind of annoying to answer a call on sipdroid with the stock tmobile dialer still ringing.
I'm not sure exactly what you're asking, but I haven't had any issues with redundant incoming calls - though I do often see missed calls registered when I answer with sipdroid. I'm not sure there's anything that can be done with that aside from changing the phone preferences under the Google voice web app. If it is set up to ring both numbers, both numbers will likely still ring.
codesplice said:
I'm not sure exactly what you're asking, but I haven't had any issues with redundant incoming calls - though I do often see missed calls registered when I answer with sipdroid. I'm not sure there's anything that can be done with that aside from changing the phone preferences under the Google voice web app. If it is set up to ring both numbers, both numbers will likely still ring.
Click to expand...
Click to collapse
The current setup i have right now is that I have both sipdroid on, along with google voice forwarding my gv number to ring my original tmobile number. When I get an incoming call the sipdroid comes up first and is ringing, if i take the call then sipdroid shuts off the google voice-tmobile forwarding ringer. With old versions of sipdroid there would be a dual ringer problem, meaning if i answer the call through sipdroid the phone would continue to ring because google voice forwarding to mobile number wouldnt recognize that the call has already been answered. The reason i keep the forwarding to mobile still on is that I can pick whether to do a voip call or a standard tmobile network call if im in a area with bad data coverage.