As we know D802T does not support TWRP it goes into bootloop. Any one here from Australia with model D802T tried flashing with any other KDZ? if yes can u tell me which one and if there were any issues with it like baseband etc??
I want to install roms and not able to since i cant install recoveries on it..also is there a chance to sideload rom from adb?
Any suggestions are appreciated.
Thanks
Ash19_87 said:
As we know D802T does not support TWRP it goes into bootloop. Any one here from Australia with model D802T tried flashing with any other KDZ? if yes can u tell me which one and if there were any issues with it like baseband etc??
I want to install roms and not able to since i cant install recoveries on it..also is there a chance to sideload rom from adb?
Any suggestions are appreciated.
Thanks
Click to expand...
Click to collapse
What carrier are you on?
Sent from my LG-VS980 using XDA Free mobile app
Ash19_87 said:
As we know D802T does not support TWRP it goes into bootloop. Any one here from Australia with model D802T tried flashing with any other KDZ? if yes can u tell me which one and if there were any issues with it like baseband etc??
I want to install roms and not able to since i cant install recoveries on it..also is there a chance to sideload rom from adb?
Any suggestions are appreciated.
Thanks
Click to expand...
Click to collapse
The kdz flash will just fail. A lot of people have tried doing that, it just doesn't work. Also, the problem with autorec is that it flashes a patched kernel that doesn't work with your d802t firmware and will end up bricking it. The recovery does work though. So theoretically, if you flashed a custom rom right after flashing the recovery it should work. I don't have a d802t though so I can't test it.
NBreunig3 said:
What carrier are you on?
Sent from my LG-VS980 using XDA Free mobile app
Click to expand...
Click to collapse
Mine is unlocked and its a prepaid sim..I can use any carrier, though i am using Telstra..
Art Vanderlay said:
The kdz flash will just fail. A lot of people have tried doing that, it just doesn't work. Also, the problem with autorec is that it flashes a patched kernel that doesn't work with your d802t firmware and will end up bricking it. The recovery does work though. So theoretically, if you flashed a custom rom right after flashing the recovery it should work. I don't have a d802t though so I can't test it.
Click to expand...
Click to collapse
Well i have tried doing this as well installed a rom through it but still it wont boot up. Stuck on Lg logo..
is there any possibiltiy with adb sideloading?
is there any possibility with adb sideloading and installing new rom??
If yes, can anyone tell me how?
Ash19_87 said:
is there any possibility with adb sideloading and installing new rom??
If yes, can anyone tell me how?
Click to expand...
Click to collapse
That requires a custom recovery and flashing twrp through adb would require Loki which doesn't work on kit kat. It's disappointing that you couldn't flash a rom directly. Maybe you should try flashing an aosp rom like cm after autorec and then go from there. Otherwise, downgrading to jelly bean through a kdz flash is your only option. You just need to find some jb firmware first.
Art Vanderlay said:
That requires a custom recovery and flashing twrp through adb would require Loki which doesn't work on kit kat. It's disappointing that you couldn't flash a rom directly. Maybe you should try flashing an aosp rom like cm after autorec and then go from there. Otherwise, downgrading to jelly bean through a kdz flash is your only option. You just need to find some jb firmware first.
Click to expand...
Click to collapse
Another failed attempt i installed CM from TWRP and also flashed gapps..but its still stuck at bootloop Now i shall again install the original kdz again to use my phone..
Only option left now is finding a jelly bean kdz..and installing it..
Ash19_87 said:
Another failed attempt i installed CM from TWRP and also flashed gapps..but its still stuck at bootloop Now i shall again install the original kdz again to use my phone..
Only option left now is finding a jelly bean kdz..and installing it..
Click to expand...
Click to collapse
any luck finding the 4.2.2 kdz file? a link would be the best...
LG G2 no LTE in India
I have been searching xda forums like crazy for enabling lte on my lg g2 D802 in india.
I have flashed D802T india stock rom kdz (For working with band 40 in india) however getting only 3g signal and no 4G.
My phone model also shows as D802T instead of D802. The network settings is showing as GSM/WCDMA/ Lte (Auto) but no luck. Any help would be greatly appreciated
LG D-802T firmware issue
Tried flashing custom rom (CM13) after flashing recovery (TWRP) on my LG D-802T (Australian); it started off fine but then ended up bricking the phone: "Continuous LG logo"
Tried flashing it with UK open ROM, failed again.
Did The Australian D-802T stock ROM, worked...
So concluded that it doesn't support others.
ahsen101 said:
Tried flashing custom rom (CM13) after flashing recovery (TWRP) on my LG D-802T (Australian); it started off fine but then ended up bricking the phone: "Continuous LG logo"
Tried flashing it with UK open ROM, failed again.
Did The Australian D-802T stock ROM, worked...
So concluded that it doesn't support others.
Click to expand...
Click to collapse
By any chance do you still have Autorec apk for D802T ?
Related
Hey everyone, sorry if this question has been answered already. I have sifted through pages and pages in this forum and haven't found a solution for my D800.
My G2 is rooted, with TWRP installed. I was successful in flashing Paranoid Android v4 beta 4, and 5. The problem arises when I try to flash LG Stock based ROMS. After TWRP says flashing was successful and I try to reboot, the screen shows LG logo for a second and turns blank!! That's it just a clear black screen, and the ROM doesn't boot at all.
The ROMs I tried and failed to boot:
1. Aeon
2. Korean stock based rom
3. Scott's CleanROM
4. Rayglobe 3.2
5. Rayglobe Flex ROM v4
Now, I know that sometime ROMs take time to boot on the first run, so I even tried leaving it at the blank screen for 15-20 mins with no result. Since it has been the same result for multiple ROMs, it definitely isn't a bad install or a bad ROM download either. I hope not
Is there anything I am missing in the steps? All ROMs were installed after factory resetting through TWRP (no dirty flash). I am baffled with this, please let me know if I need to revert to software version "d" for these ROMs to work?
TIA
vish9 said:
Hey everyone, sorry if this question has been answered already. I have sifted through pages and pages in this forum and haven't found a solution for my D800.
My G2 is rooted, with TWRP installed. I was successful in flashing Paranoid Android v4 beta 4, and 5. The problem arises when I try to flash LG Stock based ROMS. After TWRP says flashing was successful and I try to reboot, the screen shows LG logo for a second and turns blank!! That's it just a clear black screen, and the ROM doesn't boot at all.
The ROMs I tried and failed to boot:
1. Aeon
2. Korean stock based rom
3. Scott's CleanROM
4. Rayglobe 3.2
5. Rayglobe Flex ROM v4
Now, I know that sometime ROMs take time to boot on the first run, so I even tried leaving it at the blank screen for 15-20 mins with no result. Since it has been the same result for multiple ROMs, it definitely isn't a bad install or a bad ROM download either. I hope not
Is there anything I am missing in the steps? All ROMs were installed after factory resetting through TWRP (no dirty flash). I am baffled with this, please let me know if I need to revert to software version "d" for these ROMs to work?
TIA
Click to expand...
Click to collapse
Did you factory reset after as well? If I recall correctly Paranoid Android is AOSP. What kernel are you running?
sounds like you are onn the 10o update. You will need to flash back to stock 10d with lg flash tool and then root and install recovery again. Then you should be good to go on flashing roms. I know that some of the newest versions of TWRP and Philz have issues flashing some roms too so that may also be the cause. If you downgrade the recovery you have to the version right before it may fix your issue also
joebob296 said:
Did you factory reset after as well? If I recall correctly Paranoid Android is AOSP. What kernel are you running?
Click to expand...
Click to collapse
Exactly, AOSP ROMs are booting up fine but not the Stock based ones.. I am not flashing any kernels, just the ROM, so I'm assuming it will run on either the stock kernel or the kernel included in the ROM zip?
Have you been successful in installing such ROMs? Am I missing something in the wiping part? Only been doing the factory reset in TWRP before installing any ROM.
Check m
And make sure that you are running the stock kernel. Are you on the 10o update?
Sent from my LG-D801 using Tapatalk
rquiett said:
sounds like you are onn the 10o update. You will need to flash back to stock 10d with lg flash tool and then root and install recovery again. Then you should be good to go on flashing roms. I know that some of the newest versions of TWRP and Philz have issues flashing some roms too so that may also be the cause. If you downgrade the recovery you have to the version right before it may fix your issue also
Click to expand...
Click to collapse
Oh, I hadn't thought about anything being wrong with the recovery.. Always assumed it gets the work done
How do I find previous versions of TWRP compatible with D800?
joebob296 said:
Check m
And make sure that you are running the stock kernel. Are you on the 10o update?
Sent from my LG-D801 using Tapatalk
Click to expand...
Click to collapse
Yes I am on 10o.. Does it have issues with installing other Stock ROMs? If yes, I'll try to follow the thread on using LGFlash tools, I've never done that before. Hopefully its not much difficult to follow the instructions.
That is one of the easiest guides to follow. Be sure to follow the correct set of instructions(depends on carrier) and download the the 10d version.
Sent from my LG-D801 using Tapatalk
joebob296 said:
That is one of the easiest guides to follow. Me sure to follow the correct set of instructions(depends on carrier) and download the the 10d version.
Sent from my LG-D801 using Tapatalk
Click to expand...
Click to collapse
Thanks.. I'll try to do it tonight and post my results here.
joebob296 said:
Be sure to follow the correct set of instructions(depends on carrier) and download the the 10d version.
Sent from my LG-D801 using Tapatalk
Click to expand...
Click to collapse
I'm stuck in the process! Can't change the com port number to 41. The guide is pretty easy to understand. But when I put my phone is download mode and try to change the com port number, it says I don't have the write privileges for this device's setting. I've tried it on both Win 7 and Win 8 laptops, with LG mobility drivers installed.
Is there something in the phone settings I need to enable so that I get the write privileges to change com port number?
Do you have administrator privileges?
Sent from my LG-D801 using Tapatalk
SOLVED!
joebob296 said:
Do you have administrator privileges?
Sent from my LG-D801 using Tapatalk
Click to expand...
Click to collapse
Yay!!! Finally did it!
Issue 1: If faced with write privileges for com port (tried successfully in Win 8)
Solution: After going in to com port properties, click "change settings" and there is the option to change com port number.
Issue 2: Once the port number was changed to 41, rest of the instructions are easy to follow on this thread http://forum.xda-developers.com/showthread.php?t=2633150
Once on D80010d, I rooted with ioroot22, and installed recovery using FreeGee. Just installed Rayglobe 3.2 minutes ago, and it finally booted up!!!
So, the bottomline is that go back to D80010d if you wanna play with Stock based ROMs! I flashed with TWRP 2.6.3.3, so the fault is not with the recovery. That much I can confirm
Thanks for the suggestions guys. Thread solved I guess.
Great. Glad to hear it.
Sent from my LG-D801 using Tapatalk
rquiett said:
sounds like you are onn the 10o update. You will need to flash back to stock 10d with lg flash tool and then root and install recovery again. Then you should be good to go on flashing roms. I know that some of the newest versions of TWRP and Philz have issues flashing some roms too so that may also be the cause. If you downgrade the recovery you have to the version right before it may fix your issue also
Click to expand...
Click to collapse
Thanks for the input. Before I flashed back to D80010d today, I installed older versions of Philz and TWRP but neither helped. So downgrading was sort of a compulsion, in my case at least.
and the moral of the story is, unless you are getting an android version upgrade in the update, do not take the update.
So, a while back I installed the KitKit ROM for ATT before any custom ones were out.
I'm trying to flash the stock back onto my device with LG Flash Tool but it keeps telling me I have the wrong device for the .tot file and .dll file. It seems like my D800 is recognized as a D802 international G2. How can I fix this?
In settings > about phone it shows it as D800, but under software it shows D80220a. I also tried to install a custom recovery but that didn't work out. Gave me a certificate error.
brswattt said:
So, a while back I installed the KitKit ROM for ATT before any custom ones were out.
I'm trying to flash the stock back onto my device with LG Flash Tool but it keeps telling me I have the wrong device for the .tot file and .dll file. It seems like my D800 is recognized as a D802 international G2. How can I fix this?
In settings > about phone it shows it as D800, but under software it shows D80220a. I also tried to install a custom recovery but that didn't work out. Gave me a certificate error.
Click to expand...
Click to collapse
it sounds like you have a custom rom like poweruser anyways if your device is d800 but shows d802 then you can try the dll in the poweruser thread which ignores model check for d800 only
brswattt said:
So, a while back I installed the KitKit ROM for ATT before any custom ones were out.
I'm trying to flash the stock back onto my device with LG Flash Tool but it keeps telling me I have the wrong device for the .tot file and .dll file. It seems like my D800 is recognized as a D802 international G2. How can I fix this?
In settings > about phone it shows it as D800, but under software it shows D80220a. I also tried to install a custom recovery but that didn't work out. Gave me a certificate error.
Click to expand...
Click to collapse
Use the DLL file posted in this thread. Its universal and should solve our problem.
Hit thanks when done:good:
http://forum.xda-developers.com/showpost.php?p=46454430&postcount=1
daraj said:
Use the DLL file posted in this thread. Its universal and should solve our problem.
Hit thanks when done:good:
http://forum.xda-developers.com/showpost.php?p=46454430&postcount=1
Click to expand...
Click to collapse
Thanks so much!
So after I do this, and want to install a KitKat Rom such as : http://forum.xda-developers.com/showthread.php?t=2728703
what are the proper steps?
do I have to update to KitKat somehow again? Or can I just root / install custom recovery and flash and be good to go?
brswattt said:
Thanks so much!
So after I do this, and want to install a KitKat Rom such as : http://forum.xda-developers.com/showthread.php?t=2728703
what are the proper steps?
do I have to update to KitKat somehow again? Or can I just root / install custom recovery and flash and be good to go?
Click to expand...
Click to collapse
Yup install official att stock rom then acheive root using ioroot25 or ioroot23 after that install Autorec(by cloudyf) this will adjust your bootloader and install a custom recovery. after that install any custom rom you want.
daraj said:
Yup install official att stock rom then acheive root using ioroot25 or ioroot23 after that install Autorec(by cloudyf) this will adjust your bootloader and install a custom recovery. after that install any custom rom you want.
Click to expand...
Click to collapse
Thanks so much
daraj said:
Yup install official att stock rom then acheive root using ioroot25 or ioroot23 after that install Autorec(by cloudyf) this will adjust your bootloader and install a custom recovery. after that install any custom rom you want.
Click to expand...
Click to collapse
Let it be known that I did NOT install the official stock KitKat ROM it was the other one,4.2.2. Will AutoRec still work?
EDIT: Scratch that, all went smoothly. Thanks!!!
daraj said:
Use the DLL file posted in this thread. Its universal and should solve our problem.
Hit thanks when done:good:
http://forum.xda-developers.com/showpost.php?p=46454430&postcount=1
Click to expand...
Click to collapse
Don't say it's universal that's false information, it's only for d800 and all it does is ignore the model check
Sent from my LG-D800 running stock kk, rooted with philz using XDA app
XxZombiePikachu said:
Don't say it's universal that's false information, it's only for d800 and all it does is ignore the model check
Sent from my LG-D800 running stock kk, rooted with philz using XDA app
Click to expand...
Click to collapse
I know its for D800, what I meant is whatever version his phone got changed to, this DLL will bypass model check; therefore allowing him to flash back the ATT stock. Maybe I should have worded differently.
daraj said:
I know its for D800, what I meant is whatever version his phone got changed to, this DLL will bypass model check; therefore allowing him to flash back the ATT stock. Maybe I should have worded differently.
Click to expand...
Click to collapse
Yea when you put it like that it makes more sense
Sent from my LG-D800 running stock kk, rooted with philz using XDA app
XxZombiePikachu said:
Yea when you put it like that it makes more sense
Sent from my LG-D800 running stock kk, rooted with philz using XDA app
Click to expand...
Click to collapse
I'm glad i passed the quality control check.
Hi,
I have a LG G2 D802 (European version) which is on KOT49i.D80220d. I believe this is the latest firmware released by LG so far. I rooted it today, but now it won't allow me to flash a custom recovery.
Used IOroot25 to root, and it's working.
Tried flashing CWN through ROM Manager, no luck.
Tried TWRP too, but it goes back into the stock recovery.
It just won't allow me to flash a custom recovery. What's more, it seems its not a supported device in FreeGee. PFA the screenshot.
Anyone has a solution?
Evo911 said:
Hi,
I have a LG G2 D802 (European version) which is on KOT49i.D80220d. I believe this is the latest firmware released by LG so far. I rooted it today, but now it won't allow me to flash a custom recovery.
Used IOroot25 to root, and it's working.
Tried flashing CWN through ROM Manager, no luck.
Tried TWRP too, but it goes back into the stock recovery.
It just won't allow me to flash a custom recovery. What's more, it seems its not a supported device in FreeGee. PFA the screenshot.
Anyone has a solution?
Click to expand...
Click to collapse
You need to use AutoRec - the bootloader in KK will not allow Recovery to be flashed.
^^ This is why I love XDA! Thanks!
Evo911 said:
^^ This is why I love XDA! Thanks!
Click to expand...
Click to collapse
Good
Should have posted a question in Q and A by the way... future reference.
A few days ago I had the same problem. When I received my LG-D802 last week, I have performed as a first upgrade to 4.4. A mistake I now know. The rooting I finally managed with iroot25. But I did not managed to install a custom recovery. Then I finally came across AUTOREC. So it went quite easily and without problems. Thanks to the developer for this easy to use tool! Great work!
Hi! Im new here in xda so im not sure if im posting in the right place. I would like to ask for help on how to backup my G2 D802T Australia version, My g2 is currently 4.4.2 KitKat stock Rooted, is there a way to backup my Stock rom before messing with it? so incase something happens I would have a starting point again. here are some software info about my phone:
Android Version 4.4.2
Kernel version 3.4.0
Build No. KOT49I.D802T20b
Software Version: D802T20b-VDA-AU
Thanks in advance for any help!
Mrikz said:
Hi! Im new here in xda so im not sure if im posting in the right place. I would like to ask for help on how to backup my G2 D802T Australia version, My g2 is currently 4.4.2 KitKat stock Rooted, is there a way to backup my Stock rom before messing with it? so incase something happens I would have a starting point again. here are some software info about my phone:
Android Version 4.4.2
Kernel version 3.4.0
Build No. KOT49I.D802T20b
Software Version: D802T20b-VDA-AU
Thanks in advance for any help!
Click to expand...
Click to collapse
Yes there is a way, theres an app you can install called Autorec, this application will automatically set up a Custom Recovery for you to backup your files, here's a Link to get started.
http://www.droidviews.com/install-twrp-recovery-on-lg-g2-running-android-4-4-2-kitkat/
Sent from my LG-LS980 using Tapatalk
TechGirl90 said:
Yes there is a way, theres an app you can install called Autorec, this application will automatically set up a Custom Recovery for you to backup your files, here's a Link to get started.
Sent from my LG-LS980 using Tapatalk
Click to expand...
Click to collapse
Thanks for the fast reply, well i read this comment on the link you game me, im just curious and also worried that i might brick my phone, cause im a total noob when it comes to these things,
Here's some of the comments i read about D802T
"Please note you cannot install custom recovery in stock KK via any method for the D802T Australian variant and get it to boot. LG has not released kernel source code for Aussie variant, for KK, so Loki exploit does not work. If you want a custom recovery under KK you will have to install a custom ROM with already patched kernel. If you plan to stay on JB 4.2.2, however, you can indeed root and/or install TWRP without hassle on stock."
"u cant use this on the Australian version D802T.
It will soft brick your phone."
Now what should i do? im just very confused.
Mrikz said:
Thanks for the fast reply, well i read this comment on the link you game me, im just curious and also worried that i might brick my phone, cause im a total noob when it comes to these things,
Here's some of the comments i read about D802T
"Please note you cannot install custom recovery in stock KK via any method for the D802T Australian variant and get it to boot. LG has not released kernel source code for Aussie variant, for KK, so Loki exploit does not work. If you want a custom recovery under KK you will have to install a custom ROM with already patched kernel. If you plan to stay on JB 4.2.2, however, you can indeed root and/or install TWRP without hassle on stock."
"u cant use this on the Australian version D802T.
It will soft brick your phone."
Now what should i do? im just very confused.
Click to expand...
Click to collapse
there is a way to do it. Follow the guide and root kk but before you install autorec, make sure you have a custom rom zip ready to go on your phone sdcard and whilst still in TWRP (dont try to boot into kk yet), simply flash your custom rom, and then the phone will boot normally.
Please help! I've went through every single page on the rom thread with no answer. No one responds to my posts either.
I'm running this rom: http://forum.xda-developers.com/lg-g2/general/rom-custom-stock-lp-g2-d800-d801-d803-t3025479/page42
I tried to restore my cloudy g2 backup but just get stuck on the LG logo. I've also tried the TOT thing to go back to stock, but it just stays on 0% in download mode when I go to flash it. I don't know what to do.
You flashed the KK bootloader right? Then you must return to JB bootloader to can boot on CloudyG2 or other ROMs.
raulx222 said:
You flashed the KK bootloader right? Then you must return to JB bootloader to can boot on CloudyG2 or other ROMs.
Click to expand...
Click to collapse
I didn't flash any bootloader. When I bought the phone it was already on kit kat so I don't know if that makes a difference?
brian85 said:
I didn't flash any bootloader. When I bought the phone it was already on kit kat so I don't know if that makes a difference?
Click to expand...
Click to collapse
When you rooted your phone and installed TWRP you didn't used Autorec?
What steps you followed to install that ROM?
AbdulrahmanAmir said:
flash the jb boot loader http://www.dorimanx.com/LG/default-kernels/JB-10A-D802-BOOT-LOADER.zip then reflash the recovery again
Click to expand...
Click to collapse
how do i reflash recovery?
AbdulrahmanAmir said:
flash the jb boot loader http://www.dorimanx.com/LG/default-kernels/JB-10A-D802-BOOT-LOADER.zip then reflash the recovery again
Click to expand...
Click to collapse
brian85 said:
how do i reflash recovery?
Click to expand...
Click to collapse
We think you have to change to JB bootloader in order to make other ROMs to work, like CloudyG2.
But you need to flash the bootloader for your G2 variant, @AbdulrahmanAmir gave you a link for D802 bootloader but if you don't own a D802 then don't use that bootloader, you need one for your g2 variant.
EDIT: I see you have D800, here you can download the JB bootloader for D800 http://blastagator.ddns.net/bootloader.php