So i've tried a few ways to root my galaxy s4 running 4.4.2 but when i try it will say flash failed or in odin 3 it says
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-jflte-jfltexx-gti9505.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Any ideas what to do from here?
Rooted my S4 successfully using Geohot's Towelroot. Took less than 10 seconds.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
You need to study up on the threads:
All things ATT, MK2 etc in General
Hashcodes SafeStarp in Dev section
:good::good:
Related
Ok. So I've run Odin3 v3.07 on my device, and got a successful pass. I've downloaded root checker and Titaniu Backup.
Root Checker has sat on "Please wait for Root Check to complete. System appears to be running very slowly" For about 10 minutes. Titanium Backup is stuck on trying to get root permissions.
Any Ideas?
edit:
If it helps, I have the logs from Odin here:
<ID:0/003> Added!!
<ID:0/003> Removed!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-d2att-d2uc-samsungsghi747.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img.ext4
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/003> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
ryno9100 said:
Ok. So I've run Odin3 v3.07 on my device, and got a successful pass. I've downloaded root checker and Titaniu Backup.
Root Checker has sat on "Please wait for Root Check to complete. System appears to be running very slowly" For about 10 minutes. Titanium Backup is stuck on trying to get root permissions.
Any Ideas?
edit:
If it helps, I have the logs from Odin here:
<ID:0/003> Added!!
<ID:0/003> Removed!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-d2att-d2uc-samsungsghi747.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img.ext4
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/003> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
What firmware are you running? I've never used CF auto-root..i've always done MOTOCHOPPER and it's worked great. (I'm on MDL). Also I noticed that the "<OSM> CF-Auto-Root-d2att-d2uc-samsungsghi747.tar.md5 is valid." says d2att <--- thats the Galaxy S3 not S4...not sure if that matters. (again i've never used CF Auto Root).
Questions go in q&a
Thread moved
Either you have an S3 and are posting in the wrong forums or you have an S4 and are playing around with the wrong software. That's a dangerous game.
What are you try to do? serious, if you are trying to brick your phone, you are going to if you complete this little task. From what you posted it is a att g3 image.
he's right.
Hello everyone,
I used QBKing to root my phone then I tried to do the hotspot mod, and more then likely used the incorrect odex file and have tried 4 different sprint ROM's to reset the firmware with Odin but to no avail.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUAMDC_L720SPTAMDC_L720VPUAMDC_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Is what Odin keeps saying, I can't get past here!
I appreciate all help and thank you in advance.
Flash this. You must be on MJA
http://www.rwilco12.com/downloads.php?dir=Files/Devices/Samsung Galaxy S4 (SPH-L720)/Stock ROMs/MJA
Sent from my SPH-L720 using Tapatalk
So i've tried a few ways to root my galaxy s4 running 4.4.2 but when i try it will say flash failed or in odin 3 it says
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-jflte-jfltexx-gti9505.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Any ideas what to do from here?
darksmite653 said:
Any ideas what to do from here?
Click to expand...
Click to collapse
Yeah. Go to S4 forum and ask there because your problem has nothing to do with Omni.
chasmodo said:
Yeah. Go to S4 forum and ask there because your problem has nothing to do with Omni.
Click to expand...
Click to collapse
ok sorry, i couldent find it at the time, its my first post
darksmite653 said:
So i've tried a few ways to root my galaxy s4 running 4.4.2 but when i try it will say flash failed or in odin 3 it says
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-jflte-jfltexx-gti9505.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Any ideas what to do from here?
Click to expand...
Click to collapse
By doing this method, you run the risk of tripping knox 0x1 which will definitely void your warranty. If you want to root without triggering it, try towelroot.
I was rooting the new 5.0.2 update and as i was doing it there a error i think the code was 1 but i am not 100% sure. as soon as i started the odin process and then it froze and i cant get the tablet to go out of Odin mode and i tried flashing the orignal rom and it didnt work.
the processes:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T530NUOVU1BOJ2_T530NUBNN1BOJ2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i have no idea why this is happening and i need to get out of odin very fast (because need the info on it)
can someone help please
Hi,
Thanks for using XDA assist.
Your thread will be moved to the Galaxy Tab 4 Q&A, Help & Troubleshooting forum for specialized help. There are experts there who can help you out.
Good Luck! - gsstudios
Your firmware might be corrupted, try redownloading the 4.4.2 version then update it to 5.0.2. I also guess twrp method does not work on 5.x.x firmwares on tab 4
sup people, so i've been trying to root my s5 using this file "CF-Auto-Root-klte-kltexx-smg900f.tar" and whenever i try i get the same message which is:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-klte-kltexx-smg900f.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
any idea how to fix this?
Follow these instructions
http://forum.xda-developers.com/gal...ow-to-root-t3300316/post64961009#post64961009