Database Users

New O2 Exec ROM and OzVGA - Lovers or Enemies?

Has anyone else tried to run OzVGA with the new O2 Exec ROM recently released?
I've now tried twice and both times after rebooting into VGA mode it locks on the image with what looks like the sun. I can see the Select and Exit today buttons across the bottom but thats it.
Oh and the signal LED is flashing so at least something is working.
No response from the device at all.
Please tell me someone has seen this and has a fix - I dont think I could handle another hard rest again.
Didn't have these problems with the iMate ROM.
TIA
Jason

ozVGA does not work on the new EXEC/Dopod ROM.
Try another one as attached. I have tested it and it works great!

Bought my XDA Exec a week ago and had been struggling to install OzVGA via downloads from other threads here. Saw your posts here, gave it a go, worked first time. Thanks for the pointer.
Only a small number of font issues with the built-in monitor programs, but the main apps seem to display well. Only unexpected quirk for me is that I can no longer get a fingernail to the Close (red cross) button in the top-right-hand corner - the bezel gets in the way! Still, I'm prepared to sharpen my nails as per a recent thread!
Any clues as to the source - is it a variant of OzVGA, or a different product?

Will this work with the QTEK ROM or is this just specific for O2?

WM5 Changes
Start -> Settings -> Screen -> Text Size -> set to one before Largest (doesn't change much but it does help)
ozVGA settings
Fonts
MenuBar Font: Bold 900
System Font: 1200
Hor./Ver. Scrollbar, Min Scrl Thumb: 20
ozVGA: 750, 900, 975, 1200, 1500
Here is the file you need and the instructions. The only difference is that you should not use the files contained in the "Windows Folder Files" of the .rar but download the new and updated dll files for AKU2 from here:VGA files
Extra step: Create a shortcut to VJBigPhoneRes in \windows\startup
Notes:
1. Backup so you don't have to hard reset if anything goes wrong.
2. Before replacing the files in \windows with the ones contained in "vgasystemfiles" make sure you backup the originals.
3. WM5 do not allow overwriting ROM files from your PC. You can however move the files to your SD and do it from there.
4. You will get a new icon on the bottom right hand corner, for VJBigPhoneRes. If for any reason the phone app does not appear correctly just tap on it and "Load and fix phone".
5. The only phone buttons that do not appear correctly are on the PIN input screen but that's not really an issues since you can type the pin and hit enter.
Hope this helps.
Joanna

i've tried this on my O2 exec with what so far seems to be a large ammount of success here. (following the instructions in the last post).
I have reco explorer installed so it makes overwriting the rom based files (power.exe etc).
I recommend that you use something like spb backup to back the device up in its entirity before you do this!
Also it would be good if we had a revert application for the phone vbj stuff but for now , hey , it works if you have a spare 10 minutes to set it up.
I surfed to one of my regular sites via opera and it looks excellent on par with the Zaurus SL-3200 runing firefox.
Previously when i tried this alot of the GFX were mangled. so far i've only found a little bit of mangled GFX.
Hudsons IP Dashboard ends up getting a bit squished but its nothing that ruins the uses of the app. Also looks like the bottom right hand corner of active sync has a little bit of corruption. but its not as if it makes the device un-usable.
I'm looking at it now and it looks EXCELLENT! The one thing that concerns me is battery drain, i would have thought this will effect the battery with it having to draw more of a screen now but i'll keep a check on it.
I'm running the latest 02 rom so I can confirm a large ammount of success and if you use spb backup you can easily restore the device should you need to..
to be fair though, you need good eye sight, i've turned the font up to biggest and it still looks good (also helps a little with spacing).
have a bash, don't be scared!

Help
Hello Guys,
I'm a newbie here, so can you please walk with me step by step?
I read about it and I liked its features but when I downloaded it and ran it, installed it on my Universal (Orange), nothing has changed, and I didnt find where it was installed on my Universal, so can you please tell me why, what, how & where?
Thanx guyz
Cheerz

Re: Help
CerberuS said:
Hello Guys,
I'm a newbie here, so can you please walk with me step by step?
I read about it and I liked its features but when I downloaded it and ran it, installed it on my Universal (Orange), nothing has changed, and I didnt find where it was installed on my Universal, so can you please tell me why, what, how & where?
Thanx guyz
Cheerz
Click to expand...
Click to collapse
It works fine now, I had to go into the TEMP and install it
I am happy
thank you all
CerberuS

joannaex said:
WM5 Changes
Start -> Settings -> Screen -> Text Size -> set to one before Largest (doesn't change much but it does help)
ozVGA settings
Fonts
MenuBar Font: Bold 900
System Font: 1200
Hor./Ver. Scrollbar, Min Scrl Thumb: 20
ozVGA: 750, 900, 975, 1200, 1500
Here is the file you need and the instructions. The only difference is that you should not use the files contained in the "Windows Folder Files" of the .rar but download the new and updated dll files for AKU2 from here:VGA files
Extra step: Create a shortcut to VJBigPhoneRes in \windows\startup
Notes:
1. Backup so you don't have to hard reset if anything goes wrong.
2. Before replacing the files in \windows with the ones contained in "vgasystemfiles" make sure you backup the originals.
3. WM5 do not allow overwriting ROM files from your PC. You can however move the files to your SD and do it from there.
4. You will get a new icon on the bottom right hand corner, for VJBigPhoneRes. If for any reason the phone app does not appear correctly just tap on it and "Load and fix phone".
5. The only phone buttons that do not appear correctly are on the PIN input screen but that's not really an issues since you can type the pin and hit enter.
Hope this helps.
Joanna
Click to expand...
Click to collapse
i tried that, but it wone lest em copythe backlight files etc as the files are read only etc? hoe can i replace them?

anyone? i cant figure it out, or if the worst comes to the worst, how do you remove it? or is that hard reset time?

You can copy the files from the SD into the main memory with Resco Explorer. It will allow you to overwrite ROM files.

The file download now seems to be 404 for me. Please could someone else kindly upload the files so I can have some fun too :]
-EDIT-
Managed to find what was needed. Thanks

Wisbar Advance Deskyop HELP

Hu everyone,
i have installaed the latest wisbar Advance Desktop on a Tytn couse I love some desktop skin i've seen on the net.
But i'm totally new in this program so I don't know to make the skin.
I'd like to download packed just all done.... i would like to copy on the device and all is just done.
can someone help me in where to find this packages, how to install, where to copy and what operations i have to do to make it work?
thanks

http://www.lakeridgesoftware.com/forum/index.php

gerazzo said:
Hu everyone,
i have installaed the latest wisbar Advance Desktop on a Tytn couse I love some desktop skin i've seen on the net.
But i'm totally new in this program so I don't know to make the skin.
I'd like to download packed just all done.... i would like to copy on the device and all is just done.
can someone help me in where to find this packages, how to install, where to copy and what operations i have to do to make it work?
thanks
Click to expand...
Click to collapse
Gerazzo
Darky has given you a good link. Like me you're new to WAD and I found the following guide to WAD very useful in getting started.
http://www.lakeridgesoftware.com/downloads/wad.doc
Mike

Thanks for the link... it's very usefull. i will start to learn how to make my own skin but....
in the meanwhile i'd like to use some skin found on the forum.
i have downloaded it (for example Vistabetatwo). unpacked and copied in the
SD, set in wisbar the directory and in the theme page i can find it.
selected, but the only things changed are the upper and bottom bar.... and where are all the object on the desktop? the link? the meter?
in the preview image there so many things....
where am I making mistakes?
Thnaks

some might be from other programs like spb pocketplus /spb diary / pocket pc phone alarm ..etc, also to customize what's on your today screen go to star/settings/today/items and choose them from there

WAD is for advanced users ...

WAD
gravejoker said:
WAD is for advanced users ...
Click to expand...
Click to collapse
gravejoker
Not sure I agree with you. Yes it is a bit finicky to work out and it does help to know your way around basic directories and file structures but from knowing nothing about it two days ago I now have 5 today screens all looking different all with different plug ins and buttons set up to move from one page to another. Where I do agree is, that this is a Hermes board and not a general one and perhaps we don't want to clog it up with non hermes specific issues? There is plenty of help\ on other sites for WAD as shown in above posts.
I would say in relation to hermes that WAD is very useful due to its provision of multiple Today screens as hermes has a relatively small screen to fit all those lovely plugins. Also I was concerned it would really slow up my TyTn with all these pages and plugins but actually having the plugins on seperate pages rather than all on one has speeded up the device! I think the real advanced users like vijay for example probably write their own code/programmes for this sort of thing.
My advice with all these things is give it a try and see where you get to, just back-up what you can before starting and go for it - that's the joy of having the hermes in the first place - unless you're a business user in which case don't tell the boss!!
Mike
Mike

I see your pints of view...
but i'm wondering about some packages like themes that can be installed easly like executing an .exe
and all is set automaticaly.
Thnkas

WAD
gerazzo said:
I see your pints of view...
but i'm wondering about some packages like themes that can be installed easly like executing an .exe
and all is set automaticaly.
Thnkas
Click to expand...
Click to collapse
The point of Wisbar Advance and Wisbar Advance Desktop is that you can set them up and customise them and so you have to hunt down a nice theme download it / unzip and place it on your device in suitable directories. These do not in my experience come in nice exe or cab files but are files you put directly into the folders WA and WAD looks for it's themes. The following link has the popular Windows vista theme:
http://www.sbsh.net/forums/index.php?showtopic=11182
Download the qvga skin package. (can download the icons and wallpapers as well for later use.)
When you unzip there will be a lot of folders the most essential ones to put in your Wisbar Themes folder on your device are the ones named Windows Vista WA2, Windows Vista WAD, and Windows Vista Media Player.
The themes folder is likely to be on device or storage card in programme files>lakeridge>wisbar advance>Themes. Drop the files in there. Go to WA settings>my theme page and hopefully the theme will show up for you to select, If not you need to go to WA >settings>programme directories and tell it where to find the new files.
Sadly no programme that just does it all for you and as darky pointed out some of the fancy stuff on today screens posted in the forums:darkysome might be from other programs like spb pocketplus /spb diary / pocket pc phone alarm ..etc, also to customize what's on your today screen go to star/settings/today/items and choose them from there
So the look is coming from many different features all running together.
Cheers
Mike

Thnaks very much for you istrucions.
i've just done all the things you say. The upper bar is modified and the desktop come out but with no item on it.
HOW i can install desktop Themes?

Mmmmm..
gerazzo said:
Thnaks very much for you istrucions.
i've just done all the things you say. The upper bar is modified and the desktop come out but with no item on it.
HOW i can install desktop Themes?
Click to expand...
Click to collapse
gerazzo
This may take some time to explain. (a good general guide is the WAD.Doc link shown earlier).
1. Be sure Advance Desktop is active - go to windows symbol and give it a long press. This brings up a menu. Select Settings. Click arrow beside My Theme, this brings up another menu select plugins at the bottom, an item "Desktop" should appear and be ticked. (If not Wisbar Advance Desktop is not installed properly).
2. Get back to Desktop. Long Press on a free area on the desktop and a menu should appear. Select "new" (we'll add a RAM Meter) so select "meter". A screen appears, use drop down box at top of screen and select "Memory RAM". Leave storage set to "My Device".
3. In the Path to image box you must enter the path to an image. (If you downloaded the Icons file along with the vista theme and saved them on your device/storage card then use gray box on right to find your way tothe folder and select a nice icon. If you did not put the icons folder on your device then just use the gray box followed by down arrow top right to go to the My Device> "Windows" folder. A lot of icons should then appear. Pick one - (doesn't matter which one it's just so you see how it works), and click ok. Pressing ok again takes you back to desktop and your meter should be there. You can drag it to a suitable place.
It's very much the same procedure for adding new shortcuts other meters, new desktop pages etc. With practice you can change to new wallpapers font sizes etc etc.
Enough for now.
Mike

I know hot to build virtual pages, dock, and meter... but i'm not looking for guides to build my own theme but i'd like to download theme just done!
so i have only to copy files into the device; the wa2 folder and the wad folder,
but i need that in the wad folder there is the skin file that i can load throught ther theme manager
thanks

Itask Configuration and Answers for Mogul/XV6800/Titan Owners

I thought I'd start a thread for anyone else out there like me who thinks that rhov23's Itask application is fantastic but has yet to figure out all of his/her device's configuration. If we all collaberate, we can probably limit the repetetive questions rhov23 gets so that he can continue to focus on advancing Itask even further.
Anyway, I'll keep this updated with the latest answers and fixes. Post your own configuration questions and hopefully someone else has already found the answer and can help you out. It is also worth noting that it is usually necessary to restart iTask after making changes or modifications. Below is my modified input.txt file and descriptions of the changes I've made thus far. There is still a ton of work left to do:
***Make no mistake, all credit and donations go to rhov23, here ->>> <http://forum.xda-developers.com/showthread.php?t=364344> for this super piece of technology. ***

Input.txt (pt 1)
\\ iTask Modification File
\\Background picture
&backgroundpic=back.jpg&END
\\Clock on main screen. modern=24 hour clock, old= 12 hour-ampm
&timeformat=old&END (I'M USING THE OLD= 12 HOUR-AMPM FORMAT)
\\Analog Clock background
&clockback=analog.jpg&END
\\Change your weathercode from Yahoo Weather. Change degrees=c to f if you want fahrenheit
&degrees=f&END
&COUNTRY_ID=USIL0389&END
&COUNTRY_ID2=USMS0005&END
&COUNTRY_ID3=USCO0131&END
&COUNTRY_ID4=USAK0021&END (GO TO YAHOO WEATHER, SEARCH FOR THE CITY YOU WANT, COPY THE CODE PORTION FROM URL, LOOKS LIKE THIS->USIL0389<, PASTE AND REPLACE THE PRESET CITY CODES AND REMEMBER TO UPDATE THE WEATHER BY PRESSING BAR AT BOTTOM OF WEATHER SCREEN)
\\Main menu
\\ This is the text under the Main menu icons, do not use more than 8-9 charachters
&maintext1=Contacts&END
&maintext2=Calendar&END
&maintext3=Apps&END
&maintext4=Camera&END
&maintext5=Calc&END
&maintext6=Maps&END
&maintext7=iProgs&END
&maintext8=Weather&END
&maintext9=News&END
&maintext10=Games&END
\\These are the execute-buttons in the following order from top left. Lnk and exe files accepted.
&mainexec1=\Program%20Files\PocketCM\PocketCM.exe&END (changed to pocketcm)
&mainexec2=\windows\calendar.exe&END
&mainexec4=\windows\camera.exe&END
&mainexec6=\windows\Favorites\Google Search - Maps.url&END (able to use a favorite from internet explorer for this button. very cool)
&mainexec11=\windows\cprog.exe&END
&mainexec12=\windows\tmail.exe&END (changed to messaging)
&mainexec13=\windows\Start%20Menu\Opera.lnk&END (changed to operamini)
&mainexec14=\windows\wmplayer.exe&END (changed to windows media player)
&powerdown=\itask\keys.lnk&END
&devicelock=\Program%20Files\S2U2\s2u2.exe&END (changed device lock to S2U2)
\\Mainbutton images
&mainbutton01=main01.swf&END
&mainbutton02=main02.png&END
&mainbutton03=main03.png&END
&mainbutton04=main04.png&END
&mainbutton05=main05.png&END
&mainbutton06=main06.png&END
&mainbutton07=main07.png&END
&mainbutton08=main08.png&END
&mainbutton09=main09.png&END
&mainbutton10=main10.png&END
&mainbutton11=main11.png&END
&mainbutton12=main12.png&END
&mainbutton13=main13.png&END
&mainbutton14=main14.png&END
&mainbutton15=main15.png&END
\\Loading time for different programs.(How long the loadingimage will stay on-screen. Numbervalue is in milliseconds
&mainloadtime1=2000&END
&mainloadtime2=2000&END
&mainloadtime4=2000&END
&mainloadtime6=2000&END
&mainloadtime11=2000&END
&mainloadtime12=2000&END
&mainloadtime13=2000&END
&mainloadtime14=2000&END
\\Games menu
\\ This is the text under the Games menu icons, do not use more than 8-9 charachters
&gamestext1=1&END
&gamestext2=2&END
&gamestext3=3&END
&gamestext4=4&END
&gamestext5=5&END
&gamestext6=6&END
&gamestext7=7&END
&gamestext8=8&END
&gamestext9=9&END
&gamestext10=10&END
&gamestext11=11&END
&gamestext12=12&END
&gamestext13=13&END
&gamestext14=14&END
&gamestext15=15&END
&gamestext16=16&END
&gamestext17=17&END
&gamestext18=18&END
&gamestext19=19&END
&gamestext20=20&END
\\These are the execute-buttons in the following order from top left. Lnk and exe files accepted.
&Gamesexec1=\windows\calculator.exe&END
&Gamesexec2=\windows\calculator.exe&END
&Gamesexec3=\windows\calculator.exe&END
&Gamesexec4=\windows\calculator.exe&END
&Gamesexec5=\windows\calculator.exe&END
&Gamesexec6=\windows\calculator.exe&END
&Gamesexec7=\windows\calculator.exe&END
&Gamesexec8=\windows\calculator.exe&END
&Gamesexec9=\windows\calculator.exe&END
&Gamesexec10=\windows\calculator.exe&END
&Gamesexec11=\windows\calculator.exe&END
&Gamesexec12=\windows\calculator.exe&END
&Gamesexec13=\windows\calculator.exe&END
&Gamesexec14=\windows\calculator.exe&END
&Gamesexec15=\windows\calculator.exe&END
&Gamesexec16=\windows\calculator.exe&END
&Gamesexec17=\windows\calculator.exe&END
&Gamesexec18=\windows\calculator.exe&END
&Gamesexec19=\windows\calculator.exe&END
&Gamesexec20=\windows\calculator.exe&END
\\Gamesbutton images
&gamesbutton01=game01.png&END
&gamesbutton02=game02.png&END
&gamesbutton03=game03.png&END
&gamesbutton04=game04.png&END
&gamesbutton05=game05.png&END
&gamesbutton06=game06.png&END
&gamesbutton07=game07.png&END
&gamesbutton08=game08.png&END
&gamesbutton09=game09.png&END
&gamesbutton10=game10.png&END
&gamesbutton11=game11.png&END
&gamesbutton12=game12.png&END
&gamesbutton13=game13.png&END
&gamesbutton14=game14.png&END
&gamesbutton15=game15.png&END
&gamesbutton16=game16.png&END
&gamesbutton17=game17.png&END
&gamesbutton18=game18.png&END
&gamesbutton19=game19.png&END
&gamesbutton20=game20.png&END
\\Loading time for different programs.(How long the loadingimage will stay on-screen. Numbervalue is in milliseconds
&gamesloadtime1=2000&END
&gamesloadtime2=2000&END
&gamesloadtime3=2000&END
&gamesloadtime4=2000&END
&gamesloadtime5=2000&END
&gamesloadtime6=2000&END
&gamesloadtime7=2000&END
&gamesloadtime8=2000&END
&gamesloadtime9=2000&END
&gamesloadtime10=2000&END
&gamesloadtime11=2000&END
&gamesloadtime12=2000&END
&gamesloadtime13=2000&END
&gamesloadtime14=2000&END
&gamesloadtime15=2000&END
&gamesloadtime16=2000&END
&gamesloadtime17=2000&END
&gamesloadtime18=2000&END
&gamesloadtime19=2000&END
&gamesloadtime20=2000&END

Input.txt (pt 2)
\\ This is the text under the Apps menu icons, do not use more than 8-9 charachters
&appstext1=MemM&END (MemMaid)
&appstext2=Explore&END
&appstext3=Sling&END (Mobile Slingbox Player)
&appstext4=Media&END
&appstext5=TomTom&END
&appstext6=Word&END (Word .exe)
&appstext7=Ppoint&END
&appstext8=Excel&END
&appstext9=Reader&END
&appstext10=Mail&END
&appstext11=Photos&END
&appstext12=Paint&END
&appstext13=Music&END
&appstext14=Radio&END (using streamcenter radio streams as mobile favorite for this button)
&appstext15=Record&END
&appstext16=Messenger&END
&appstext17=QuickGPS&END
&appstext18=Registry&END
&appstext19=Manager&END
&appstext20=SkTools&END
&appstext21=None&END
&appstext22=None&END
&appstext23=None&END
&appstext24=None&END
&appstext25=None&END
&appstext26=None&END
&appstext27=None&END
&appstext28=None&END
&appstext29=None&END
&appstext30=None&END
&appstext31=None&END
&appstext32=None&END
&appstext33=None&END
&appstext34=None&END
&appstext35=None&END
&appstext36=None&END
&appstext37=None&END
&appstext38=None&END
&appstext39=None&END
&appstext40=None&END
\\These are the execute-buttons in the following order from top left. Lnk and exe files accepted.
&appsexec1=\Program%20Files\MemMaid\MemMaid.exe&END (changed to MemMaid)
&appsexec2=\windows\fexplore.exe&END
&appsexec3=\Program%20Files\Sling%20Media\SlingPlayer%20Mobile\SlingPlayer.exe&END (changed to Mobile Slingbox Player)
&appsexec4=\windows\wmplayer.exe&END
&appsexec5=\Programfiler\Navigator\TomTom%20Navigator.exe&END
&appsexec6=\Windows\pword.exe&END (Word .exe)
&appsexec7=\Windows\Startmeny\Programmer\Office%20Mobile\PowerPoint%20Mobile.lnk&END
&appsexec8=\Windows\Startmeny\Programmer\Office%20Mobile\Excel%20Mobile.lnk&END
&appsexec9=\Windows\Startmeny\Programmer\Adobe%20Reader%20LE%20.lnk&END
&appsexec10=\Windows\Startmeny\Programmer\Meldingsfunksjoner.lnk&END
&appsexec11=\Windows\Startmeny\Programmer\Kameraalbum.lnk&END
&appsexec12=\windows\calculator.exe&END
&appsexec13=\Windows\Startmeny\Programmer\Lydbehandling.lnk&END
&appsexec14=\Windows\Favorites\Radio.url&END (using streamcenter radio streams from internet explorer favorites)
&appsexec15=\Windows\Startmeny\Programmer\Taleopptak.lnk&END
&appsexec16=\Windows\Startmeny\Programmer\Messenger.lnk&END
&appsexec17=\Windows\Startmeny\Programmer\HurtigGPS.lnk&END
&appsexec18=\Windows\Startmeny\Programmer\Resco%20Registry.lnk&END
&appsexec19=\Windows\Startmeny\Programmer\Comm%20Manager.lnk&END
&appsexec20=\Windows\Startmeny\Programmer\SKTools.lnk&END
&appsexec21=\Programfiler\Resco%20Explorer\Explorer.exe&END
&appsexec22=\windows\fexplore.exe&END
&appsexec23=\Programfiler\CorePlayer\player.exe&END
&appsexec24=\windows\wmplayer.exe&END
&appsexec25=\Programfiler\Navigator\TomTom%20Navigator.exe&END
&appsexec26=\Windows\Startmeny\Programmer\Office%20Mobile\Word%20Mobile.lnk&END
&appsexec27=\Windows\Startmeny\Programmer\Office%20Mobile\PowerPoint%20Mobile.lnk&END
&appsexec28=\Windows\Startmeny\Programmer\Office%20Mobile\Excel%20Mobile.lnk&END
&appsexec29=\Windows\Startmeny\Programmer\Adobe%20Reader%20LE%20.lnk&END
&appsexec30=\Windows\Startmeny\Programmer\Meldingsfunksjoner.lnk&END
&appsexec31=\Windows\Startmeny\Programmer\Kameraalbum.lnk&END
&appsexec32=\windows\calculator.exe&END
&appsexec33=\Windows\Startmeny\Programmer\Lydbehandling.lnk&END
&appsexec34=\Windows\Startmeny\Programmer\FM-radio.lnk&END
&appsexec35=\Windows\Startmeny\Programmer\Taleopptak.lnk&END
&appsexec36=\Windows\Startmeny\Programmer\Messenger.lnk&END
&appsexec37=\Windows\Startmeny\Programmer\HurtigGPS.lnk&END
&appsexec38=\Windows\Startmeny\Programmer\Resco%20Registry.lnk&END
&appsexec39=\Windows\Startmeny\Programmer\Comm%20Manager.lnk&END
&appsexec40=\Windows\Startmeny\Programmer\SKTools.lnk&END
\\Appsbutton images
&appsbutton01=app01.png&END
&appsbutton02=app02.png&END
&appsbutton03=app03.png&END
&appsbutton04=app04.png&END
&appsbutton05=app05.png&END
&appsbutton06=app06.png&END
&appsbutton07=app07.png&END
&appsbutton08=app08.png&END
&appsbutton09=app09.png&END
&appsbutton10=app10.png&END
&appsbutton11=app11.png&END
&appsbutton12=app12.png&END
&appsbutton13=app13.png&END
&appsbutton14=app14.png&END
&appsbutton15=app15.png&END
&appsbutton16=app16.png&END
&appsbutton17=app17.png&END
&appsbutton18=app18.png&END
&appsbutton19=app19.png&END
&appsbutton20=app20.png&END
&appsbutton21=app21.png&END
&appsbutton22=app22.png&END
&appsbutton23=app23.png&END
&appsbutton24=app24.png&END
&appsbutton25=app25.png&END
&appsbutton26=app26.png&END
&appsbutton27=app27.png&END
&appsbutton28=app28.png&END
&appsbutton29=app29.png&END
&appsbutton30=app30.png&END
&appsbutton31=app31.png&END
&appsbutton32=app32.png&END
&appsbutton33=app33.png&END
&appsbutton34=app34.png&END
&appsbutton35=app35.png&END
&appsbutton36=app36.png&END
&appsbutton37=app37.png&END
&appsbutton38=app38.png&END
&appsbutton39=app39.png&END
&appsbutton40=app40.png&END
\\Loading time for different programs.(How long the loadingimage will stay on-screen. Numbervalue is in milliseconds
&appsloadtime1=4000&END
&appsloadtime2=3000&END
&appsloadtime3=7400&END
&appsloadtime4=3000&END
&appsloadtime5=3000&END
&appsloadtime6=3000&END
&appsloadtime7=3000&END
&appsloadtime8=3000&END
&appsloadtime9=3000&END
&appsloadtime10=3000&END
&appsloadtime11=3000&END
&appsloadtime12=3000&END
&appsloadtime13=3000&END
&appsloadtime14=3000&END
&appsloadtime15=3000&END
&appsloadtime16=3000&END
&appsloadtime17=3000&END
&appsloadtime18=3000&END
&appsloadtime19=3000&END
&appsloadtime20=3000&END
&appsloadtime21=4000&END
&appsloadtime22=3000&END
&appsloadtime23=7400&END
&appsloadtime24=3000&END
&appsloadtime25=3000&END
&appsloadtime26=3000&END
&appsloadtime27=3000&END
&appsloadtime28=3000&END
&appsloadtime29=3000&END
&appsloadtime30=3000&END
&appsloadtime31=3000&END
&appsloadtime32=3000&END
&appsloadtime33=3000&END
&appsloadtime34=3000&END
&appsloadtime35=3000&END
&appsloadtime36=3000&END
&appsloadtime37=3000&END
&appsloadtime38=3000&END
&appsloadtime39=3000&END
&appsloadtime40=3000&END

Input.txt (pt 3)
\\Settings menu
\\ This is the text under the Settings menu icons
&settingstext1=Memory&END
&settingstext2=Light&END (IF ANYONE HAS THIS ONE FIGURED OUT, PLEASE SHARE)
&settingstext3=Network&END
&settingstext4=Power&END
&settingstext5=Screen&END
&settingstext6=Today&END
&settingstext7=Remove&END
&settingstext8=Clock&END
&settingstext9=Buttons&END
&settingstext10=Input&END
&settingshead=Settings2&END
\\These are the execute-buttons in the following order from top left. Lnk and exe files accepted.
&settingsexec1=\itask\Memory.lnk&END
&settingsexec2=\itask\Backlight.lnk&END (IF ANYONE HAS THIS ONE FIGURED OUT, PLEASE SHARE)
&settingsexec3=\itask\Connections.lnk&END
&settingsexec4=\itask\Power.lnk&END
&settingsexec5=\itask\Screen.lnk&END
&settingsexec6=\itask\Today.lnk&END
&settingsexec7=\itask\Remove Programs.lnk&END
&settingsexec8=\itask\Clock.lnk&END
&settingsexec9=\itask\Buttons.lnk&END
&settingsexec10=\itask\Input.lnk&END
\\Settingsbutton images
&settingsbutton01=settings01.png&END
&settingsbutton02=settings02.png&END
&settingsbutton03=settings03.png&END
&settingsbutton04=settings04.png&END
&settingsbutton05=settings05.png&END
&settingsbutton06=settings06.png&END
&settingsbutton07=settings07.png&END
&settingsbutton08=settings08.png&END
&settingsbutton09=settings09.png&END
&settingsbutton10=settings10.png&END
\\Loading time for different programs.(How long the loadingimage will stay on-screen. Numbervalue is in milliseconds
&settingsloadtime1=2000&END
&settingsloadtime2=2000&END
&settingsloadtime3=2000&END
&settingsloadtime4=2000&END
&settingsloadtime5=2000&END
&settingsloadtime6=2000&END
&settingsloadtime7=2000&END
&settingsloadtime8=2000&END
&settingsloadtime9=2000&END
&settingsloadtime10=2000&END
\\This is the text under the Internal apps menu icons
&iprogtext1=Write&END
&iprogtext2=iSat&END
&iprogtext3=Timer&END
&iprogtext4=MiniCal&END
&iprogtext5=Draw&END
&iprogtext6=Tetris&END
&iprogtext7=Snake&END
&iprogtext8=PingPong&END
&iprogtext9=Puzzle&END
&iprogtext10=Breaker&END
&iprogtext11=Steveball&END
&iprogtext12=Solitaire&END
&iprogtext13=&END
&iprogtext14=&END
&iprogtext15=&END
&iprogtext16=&END
&iprogtext17=&END
&iprogtext18=&END
&iprogtext19=&END
&iprogtext20=Credits&END
\\iProgsbutton images
&iprogsbutton01=iprog01.png&END
&iprogsbutton02=iprog02.png&END
&iprogsbutton03=iprog03.png&END
&iprogsbutton04=iprog04.png&END
&iprogsbutton05=iprog05.png&END
&iprogsbutton06=iprog06.png&END
&iprogsbutton07=iprog07.png&END
&iprogsbutton08=iprog08.png&END
&iprogsbutton09=iprog09.png&END
&iprogsbutton10=iprog10.png&END
&iprogsbutton11=iprog11.png&END
&iprogsbutton12=iprog12.png&END
&iprogsbutton13=iprog13.png&END
&iprogsbutton14=iprog14.png&END
&iprogsbutton15=iprog15.png&END
&iprogsbutton16=iprog16.png&END
&iprogsbutton17=iprog17.png&END
&iprogsbutton18=iprog18.png&END
&iprogsbutton19=iprog19.png&END
&iprogsbutton20=iprog20.png&END
\\This is the update button on weather
&updateweatherbtn=updateweather.png&END
\\This is the background of news
&newsbackground=newsback.png&END
\\This is the background of settings
&settingsbackground=settingsback.png&END
\\This is the name of the Games apps menu that slides from right
&Gameshead=Games&END
\\This is the name of the internal apps menu that slides from right
&iprogshead=iProgs&END
\\This is the name of the Apps apps menu that slides from right
&Appshead=Apps&END
\\Parameter for retrieving unread sms and unanswered calls, operator
&unreadlaunch=\itask\unread.exe&END
&operatorlaunch=\itask\operator.exe&END
&settingslaunch=\itask\settings.exe&END

do i just copy and paste

Tried to change, need current ver.

jak3n3al said:
do i just copy and paste
Click to expand...
Click to collapse
This is an example of how some of the configuration should look. What exactly are you trying to set up?

well first of all im just now starting to understand this and i feel like a super genius
but my problem is most of the programs dont open it just shows a screenshot what do i do

rde34 said:
\\ This is the text under the Apps menu icons, do not use more than 8-9 charachters
\\These are the execute-buttons in the following order from top left. Lnk and exe files accepted.
&appsexec1=\Program%20Files\MemMaid\MemMaid.exe&END (changed to MemMaid)
&appsexec2=\windows\fexplore.exe&END
&appsexec3=\Program%20Files\Sling%20Media\SlingPlayer%20Mobile\SlingPlayer.exe&END (changed to Mobile Slingbox Player)
&appsexec4=\windows\wmplayer.exe&END
&appsexec5=\Programfiler\Navigator\TomTom%20Navigator.exe&END
&appsexec6=\Windows\pword.exe&END (Word .exe)
&appsexec7=\Windows\Startmeny\Programmer\Office%20Mobile\PowerPoint%20Mobile.lnk&END
&appsexec8=\Windows\Startmeny\Programmer\Office%20Mobile\Excel%20Mobile.lnk&END
&appsexec9=\Windows\Startmeny\Programmer\Adobe%20Reader%20LE%20.lnk&END
&appsexec10=\Windows\Startmeny\Programmer\Meldingsfunksjoner.lnk&END
&appsexec11=\Windows\Startmeny\Programmer\Kameraalbum.lnk&END
&appsexec12=\windows\calculator.exe&END
&appsexec13=\Windows\Startmeny\Programmer\Lydbehandling.lnk&END
&appsexec14=\Windows\Favorites\Radio.url&END (using streamcenter radio streams from internet explorer favorites)
&appsexec15=\Windows\Startmeny\Programmer\Taleopptak.lnk&END
&appsexec16=\Windows\Startmeny\Programmer\Messenger.lnk&END
&appsexec17=\Windows\Startmeny\Programmer\HurtigGPS.lnk&END
&appsexec18=\Windows\Startmeny\Programmer\Resco%20Registry.lnk&END
&appsexec19=\Windows\Startmeny\Programmer\Comm%20Manager.lnk&END
&appsexec20=\Windows\Startmeny\Programmer\SKTools.lnk&END
&appsexec21=\Programfiler\Resco%20Explorer\Explorer.exe&END
&appsexec22=\windows\fexplore.exe&END
&appsexec23=\Programfiler\CorePlayer\player.exe&END
&appsexec24=\windows\wmplayer.exe&END
&appsexec25=\Programfiler\Navigator\TomTom%20Navigator.exe&END
&appsexec26=\Windows\Startmeny\Programmer\Office%20Mobile\Word%20Mobile.lnk&END
&appsexec27=\Windows\Startmeny\Programmer\Office%20Mobile\PowerPoint%20Mobile.lnk&END
&appsexec28=\Windows\Startmeny\Programmer\Office%20Mobile\Excel%20Mobile.lnk&END
&appsexec29=\Windows\Startmeny\Programmer\Adobe%20Reader%20LE%20.lnk&END
&appsexec30=\Windows\Startmeny\Programmer\Meldingsfunksjoner.lnk&END
&appsexec31=\Windows\Startmeny\Programmer\Kameraalbum.lnk&END
&appsexec32=\windows\calculator.exe&END
&appsexec33=\Windows\Startmeny\Programmer\Lydbehandling.lnk&END
&appsexec34=\Windows\Startmeny\Programmer\FM-radio.lnk&END
&appsexec35=\Windows\Startmeny\Programmer\Taleopptak.lnk&END
&appsexec36=\Windows\Startmeny\Programmer\Messenger.lnk&END
&appsexec37=\Windows\Startmeny\Programmer\HurtigGPS.lnk&END
&appsexec38=\Windows\Startmeny\Programmer\Resco%20Registry.lnk&END
&appsexec39=\Windows\Startmeny\Programmer\Comm%20Manager.lnk&END
&appsexec40=\Windows\Startmeny\Programmer\SKTools.lnk&END
Click to expand...
Click to collapse
does anyone know what the english version of these paths are?

woodicw said:
does anyone know what the english version of these paths are?
Click to expand...
Click to collapse
For example, &appsexec4=\windows\wmplayer.exe&END refers to my windows media player. If you either look through the folders of your device from your computer or look through your file explorer on your device you can find the path to just about every program and link it correctly to the proper button. So, you insert the proper path aft this part, &appsexec4=

helppp dude i love this program i just need some help

jak3n3al said:
helppp dude i love this program i just need some help
Click to expand...
Click to collapse
You need to copy the input.txt file from the iTask folder on your phone and paste that copy somewhere on your computer to begin modifying.

Don't know why??
Don't know why, but this would not work for me:
\\These are the execute-buttons in the following order from top left. Lnk and exe files accepted.
&settingsexec1=\itask\Memory.lnk&END
&settingsexec2=\itask\Backlight.lnk&END
&settingsexec3=\itask\Connections.lnk&END
&settingsexec4=\itask\Power.lnk&END
&settingsexec5=\itask\Screen.lnk&END
&settingsexec6=\itask\Today.lnk&END
&settingsexec7=\itask\Remove Programs.lnk&END
&settingsexec8=\itask\Clock.lnk&END
&settingsexec9=\itask\Buttons.lnk&END
&settingsexec10=\itask\Input.lnk&END
But this does:
\\These are the execute-buttons in the following order from top left. Lnk and exe files accepted.
&settingsexec1=\windows\start%20menu\programs\links\Memory.lnk&END
&settingsexec2=\windows\start%20menu\programs\links\Backlight.lnk&END
&settingsexec3=\windows\start%20menu\programs\links\Connections.lnk&END
&settingsexec4=\windows\start%20menu\programs\links\Power.lnk&END
&settingsexec5=\windows\start%20menu\programs\links\Screen.lnk&END
&settingsexec6=\windows\start%20menu\programs\links\Today.lnk&END
&settingsexec7=\windows\start%20menu\programs\links\Remove%20Programs.lnk&END
&settingsexec8=\windows\start%20menu\programs\links\Clock.lnk&END
&settingsexec9=\windows\start%20menu\programs\links\Buttons.lnk&END
&settingsexec10=\windows\start%20menu\programs\links\Input.lnk&END

The first set starting with \itask work for me. The only one that doesn't is the link to backlight setting. The ones that work for you from the \windows\start%20menu don't work at all. Thanks for your input though.

rde34 said:
The first set starting with \itask work for me. The only one that doesn't is the link to backlight setting. The ones that work for you from the \windows\start%20menu don't work at all. Thanks for your input though.
Click to expand...
Click to collapse
Are you able to update the weather and news without being connected via active sync?

okay who here has itask completely working i have questions for them

rde first of all do you have an instant messanger name so you could help me figure this out quicker?
if not here are my issues i downloaded itask the other day and only a few programs worked the rest were screen shots how do i change it so it goes directly to the program?
i tried changing some things in input and saved but no changes occured

Some Help
This is a great application, which once you get used to is straight forward, if a little time consuming to set up. Half the fun for me is working out things that I don't really understand. I have the original input text file open alongside the one that I'm configuring. You just have to find the section in the input text relating to the icon your trying to link, and after the = add the path for the application you want that icon to open. The path can be found in Explorer (or better still Resco Explorer) on your device. Most applications are found in Windows, Start Menu, Programs. This is what you type into the input text file in itask, remembering a space has to be replaced by %20 and that the text has to be exactly the same as on your device.
So, if you want to assign a program (say File Explorer) on your device to the first icon on the Apps page of itask (ie when you launch itask, click the 3rd icon along which says Apps, the first button is in the top left of the new screen and has a smiley face on it) alter the text in the input.txt file of itask after &appstext1="\Windows\Start%20Menu\Programs\File%20Explorer.Ink&END" Don't use the " " I've included them to show what you should type. When you close input.txt and restart itask, the smiley face button in Apps will open File Explorer. And so on until you've linked an icon to each program you want to open.

Hello
If I start a program always comes shortly after another top ;-( (
How can I change that?
Orbit 2 (HTC) WM 6

max-es said:
Hello
If I start a program always comes shortly after another top ;-( (
How can I change that?
Orbit 2 (HTC) WM 6
Click to expand...
Click to collapse
The "another top" program you see is nothing but a screenshot, you can replace it by changing *loadpic*.jpg to any other picture you want, or if you want your application to open immediately, change your *loadtime configuration in input.txt to 0.

HD2 T-Mobile USA Photos, Videos and Customization Questions...

Hello everyone, I'm new to the Windows Mobile OS and had a few questions on it. I just picked up an HTC HD2 and I am LOVING this guy more and more since I found this site. I had a lot of fun customizing my iPhone, but I've been having a little trouble with my HD2. Here is what I was looking for:
1. Whenever I look into the Photos & Videos every photo and video on the device is show in the album. Is there a way to hide certain photos or folders so they don't show?
2. I have a set of videos I placed into one folder. Whenever I look into the folder, the videos all show as thumbnails. Is there a way to set it so I see the names of the videos and not the thumbs?
3. The T-MoUS version, has Transformers pre-installed. When I click Start, it has a Transformers icon that when selected, it opens a window with both movies lined up in a list type format. I found the Transformers.exe in the windows folder. Is there a way to create your own? (Kinda the same as question 2)
4. Can the "honeycomb" menu that shows when you click start, have the icons moved around freely? The only thing I've found is you hold an icon and you get the option to "Move to Top". I want to move them anywhere and not have to keep moving everything to top if I want something on the third row from the bottom.
Sorry for the long winded questions... any help would be greatly appreciated. Thanks in advance!
V-
PS-I tried using Search for these answers, but could not get anything.

you could move your pictures to a different folder...
I think you have to update to the version of WM where there start button is on bottom left not the top, (so changing ROM), although you can re-arrange using JWMD apps (icon changer) its on here.
use total commander to create shortcuts its nice & easy (google is your friend to download)
i use file explorer to view my file names
hope some of this helps

Is there a way to set the album cover for photos? I have a folder that has lots of photos. The one on the front is not the one I want showing.
When I put videos on my phone, they don't show up in the Albums for the HTC Sense. They show up in the WinMo Library. So how do I manually add a folder to the HTC Sense Library?
Also some of the game and windows files show up in the HTC Library. I'd like to remove them from it.

[Q] Changing incoming/outgoing calls default image

I want to change the default image that my WM 6.1 HTC Touch HD uses for the incoming/outgoing calls. I know you can add pictures for contacts, but i just want to replace the image i get for any call, be it a person from my contacts or an unknown number. I guess it's possbile to replace the image in the Windows directory, but i couldn't find it. If anyone can point me in the right direction, i'd appreciate it. Thanks

i guess, if it is a standard graphic file like .jpg or .png, the easiest way to find it would be to open Pictures & Videos (not Album!), the app is still present in most roms. then navigate to the windows folder and it will show you all the pictures in the windows folder and subfolders, look it up in the previews, click it and look for the file name (probably in properties).
it takes quite a while to load, since due to sense there are a lot of files present in the windows folder, and frankly, i'm not that interested in replacing that file, so i didn't finish it.
another, maybe faster, way might be to open a file explorer like resco explorer or total commander, sort the files in the windows folder by file type, then either open up the first picture and flick through the pictures in Album (or whatever your standard picture viewer is) until you found it OR copy all pictures to the sd card and look it up on the PC in disk drive mode (this might actually be the fastest way).

Found it in Windows folder with the help of Pictures & Videos application and the .png is called Default_person. Replaced it and now i got a decent default pic for incoming calls. Thank you very much. Topic can be closed.