I'm a nurse and need seconds displayed on my watch for when I perform vitals. I know there are watch faces that display seconds, but they go away once the screen dims. Any third party watch faces that would fit the bill?
BTW loving my gear live! Picked it up this morning.
Sent from my Nexus 7 using XDA Free mobile app
tu3218 said:
I'm a nurse and need seconds displayed on my watch for when I perform vitals. I know there are watch faces that display seconds, but they go away once the screen dims. Any third party watch faces that would fit the bill?
Click to expand...
Click to collapse
I haven't seen any. That'd be a massive drain on the battery; the watch would be constantly redrawing the display instead of sitting idle and updating only once a minute. I'm not sure you'd even get through a shift before it were to die...
johnus said:
I haven't seen any. That'd be a massive drain on the battery; the watch would be constantly redrawing the display instead of sitting idle and updating only once a minute. I'm not sure you'd even get through a shift before it were to die...
Click to expand...
Click to collapse
Yeah true good point. Well maybe there's an app I can load that just gives me seconds for when I go into a patients room. I guess I could load like a timer or something too. Or maybe I'll just have to use a regular watch during my shifts. Thanks for the input.
Sent from my XT1060 using XDA Free mobile app
tu3218 said:
Yeah true good point. Well maybe there's an app I can load that just gives me seconds for when I go into a patients room. I guess I could load like a timer or something too. Or maybe I'll just have to use a regular watch during my shifts. Thanks for the input
Click to expand...
Click to collapse
I'm sure someone could whip up an accurate watchface app that stays alive while open. Not sure if one exists already. But it shouldn't be hard to do at all.
johnus said:
I'm sure someone could whip up an accurate watchface app that stays alive while open. Not sure if one exists already. But it shouldn't be hard to do at all.
Click to expand...
Click to collapse
Yeah I would only need it active for the 5-10 min I'm in the room than switch back to a normal clock face. I would gladly donate for this too. Hopefully some Dev see's this.
Sent from my XT1060 using XDA Free mobile app
tu3218 said:
Yeah I would only need it active for the 5-10 min I'm in the room than switch back to a normal clock face. I would gladly donate for this too. Hopefully some Dev see's this.
Sent from my XT1060 using XDA Free mobile app
Click to expand...
Click to collapse
https://play.google.com/store/apps/details?id=jp.collamo.wear.richwatchfaceconcrete
Also any thing using configurable app like "wear picture watch" since you actually can just configure it to show seconds even while dimmed. There are a few nice wear picture skins out there,this guy has a whole bunch
TjPhysicist said:
https://play.google.com/store/apps/details?id=jp.collamo.wear.richwatchfaceconcrete
Also any thing using configurable app like "wear picture watch" since you actually can just configure it to show seconds even while dimmed. There are a few nice wear picture skins out there,this guy has a whole bunch
Click to expand...
Click to collapse
Hey that url is no good...Also I went to that guys page but its just zip files, not actual apks. He has some amazing designs. Wish I could actually download them. thanks for the info.
I'm learning that app but can't figure out the seconds part. Under clock draw interval, I figure that's where I need to be. I've tried sec always but seconds still don't pop up. Any ideas?
tu3218 said:
Hey that url is no good...Also I went to that guys page but its just zip files, not actual apks. He has some amazing designs. Wish I could actually download them. thanks for the info.
Click to expand...
Click to collapse
It's amazing how little people read.
i linked you to an app called "wear picture watch". Download and install that. Open it, it's a watch designer. Download the zip file from that guys page now open "wear picture watch" app. Goto the side menu scroll down you'll see "import/export" click on it. Now select the zip file and click "refresh" on top. There are other settings here on this app where you can adjust what shows up and what doesn't. One of those options can be tuned to have the seconds hand show up even when dimmed. Furthermore there is "update interval" which can be changed do the second hand moves even when dimmed.
TjPhysicist said:
It's amazing how little people read.
i linked you to an app called "wear picture watch". Download and install that. Open it, it's a watch designer. Download the zip file from that guys page now open "wear picture watch" app. Goto the side menu scroll down you'll see "import/export" click on it. Now select the zip file and click "refresh" on top. There are other settings here on this app where you can adjust what shows up and what doesn't. One of those options can be tuned to have the seconds hand show up even when dimmed. Furthermore there is "update interval" which can be changed do the second hand moves even when dimmed.
Click to expand...
Click to collapse
Actually you originally linked me to a play google link first. Which did NOT work. Which is why I said url did not work. Than I did go to that G+ link. I originally didn't see the instructions within the posts on G+, so my bad. Maybe I was distracted by the nice designs. As for the "update interval" section, there is none. There is a "clock draw interval" but not a update interval. I only saw that under weather settings.
I got it working. It is in fact the "clock draw interval", not "update interval". Just had to change that to sec. always(wake lock). Now just need to figure out how to get some numbers in there displayed around the clock.
tu3218 said:
Actually you originally linked me to a play google link first. Which did NOT work. Which is why I said url did not work. Than I did go to that G+ link. I originally didn't see the instructions within the posts on G+, so my bad. Maybe I was distracted by the nice designs. As for the "update interval" section, there is none. There is a "clock draw interval" but not a update interval. I only saw that under weather settings.
I got it working. It is in fact the "clock draw interval", not "update interval". Just had to change that to sec. always(wake lock). Now just need to figure out how to get some numbers in there displayed around the clock.
Click to expand...
Click to collapse
o my bad then . Glad to know you got it working. I think that one app should solve your issues.
TjPhysicist said:
o my bad then . Glad to know you got it working. I think that one app should solve your issues.
Click to expand...
Click to collapse
No worries, got it working exactly how I want it! So glad you pointed this out. So now I can just switch to this clock temporarily when I go in to see patients. I will post the file(assuming I can, and of course giving credit to where its due) that I used with the adjustments I made to allow seconds be displayed even while dim. So if future medical personal come along, they have a way to use their smart watch at work. thanks again.
Help getting a face
Hi
As an EMT this is exactly what I'm looking for! Downloaded wear picture watch app, but am having a hard time getting faces imported. Went to the G+ page and got the box link to download a face. It downloads a .face file. Question is where do I go from there. I do not see an import/export option in the app.
Thanks a lot
Related
i've tried both i-nigma and mobiletag, but they crash/lock up.
any suggestions?
nick2k said:
i've tried both i-nigma and mobiletag, but they crash/lock up.
any suggestions?
Click to expand...
Click to collapse
Mobiletag works fine on my HD2.... at what point does it crash for you?
that screen that tells me to take a photo of the code. it sends me to 'camera mode'. after taking the photo, i'll hit return and it brings up a "ARM 11 error" screen. then it crashes out. i'm running energy rom. i downloaded the app thru the developer's website, rather than microsoft marketplace.
nick2k said:
that screen that tells me to take a photo of the code. it sends me to 'camera mode'. after taking the photo, i'll hit return and it brings up a "ARM 11 error" screen. then it crashes out. i'm running energy rom. i downloaded the app thru the developer's website, rather than microsoft marketplace.
Click to expand...
Click to collapse
I've never gotten anything from ms marketplace either... no point. Anyways, with that app, when it takes you to camera mode, you are not suppose to take the picture yourself. As soon as it can read the bar code properly and it focuses, the program snaps the picture automatically. Just try to get the barcode in the middle of the screen and keep it still so it focuses. Don't push anything to take the pic yourself.... that's probably whats throwing the program off. It has trouble reading the barcode in low light settings sometimes, too.
I hope that helps.
zarathustrax said:
I've never gotten anything from ms marketplace either... no point. Anyways, with that app, when it takes you to camera mode, you are not suppose to take the picture yourself. As soon as it can read the bar code properly and it focuses, the program snaps the picture automatically. Just try to get the barcode in the middle of the screen and keep it still so it focuses. Don't push anything to take the pic yourself.... that's probably whats throwing the program off. It has trouble reading the barcode in low light settings sometimes, too.
I hope that helps.
Click to expand...
Click to collapse
ahhhh. yep. i didn't position the code correctly in the middle and i kept trying to take photos of it. once i let the code appear like the size of a postage stamp, it finally worked. thanks.
does it force you to use IE too? i googled for a work around so it would use opera instead...but no go.
nick2k said:
ahhhh. yep. i didn't position the code correctly in the middle and i kept trying to take photos of it. once i let the code appear like the size of a postage stamp, it finally worked. thanks.
does it force you to use IE too? i googled for a work around so it would use opera instead...but no go.
Click to expand...
Click to collapse
Not sure. I thought it used opera for me, but I'm not positive. I haven't installed it again since I last changed roms. I'll install it again later and see what I can figure out.
nick2k said:
ahhhh. yep. i didn't position the code correctly in the middle and i kept trying to take photos of it. once i let the code appear like the size of a postage stamp, it finally worked. thanks.
does it force you to use IE too? i googled for a work around so it would use opera instead...but no go.
Click to expand...
Click to collapse
Is opera set as your default browser?
keepzero said:
Is opera set as your default browser?
Click to expand...
Click to collapse
It could be...it is on my HD2, and I still can't get mobiletag to use that instead of IE
any answer for this? would prefer to use opera
mr1ncred1ble said:
any answer for this? would prefer to use opera
Click to expand...
Click to collapse
If you open Quickmark, then tap "Options" (on the bottom right in the HD2), then tap "Settings", then tap "Settings" again, you should see an option to choose "Opera Browser" instead of IE. If you don't, then this feature might be disabled in your registry. With a registry editor, search for "Quickmark" and you will find a value called "Choice_Browser". Make sure this is set to "1".
When browsing the marketplace, installing an app and then going back my scrolled position in the marketplace is lost. This is very frstrating and makes browsing and installing from the marketplace a pain.
Am I missing something?
Cheers, John
Same here. Another issue: I can search and find apps to install (for instance "Root Explorer" that I wanted to use to replace wpa_supplicant) but when I click the link to view the details and install it, I get a dialog that says the detailed view can't be found. If I click OK, it goes back to the search results. If I instead click back, I can read the detailed view, but clicking "Install" results in it telling me the application can't be found. Looks like Google is blocking the app.
+1 same problem here! (Using the tablet outdoors and I must say the feeling is great but....the screen is awful!!!! I can see my every detail reflected in the screen ...lol)
By the way is there no way to comment or rate an app from the market app???
Is there perhaps a way of installing the gingerbread marketplace app?
John
cybermage1 said:
Same here. Another issue: I can search and find apps to install (for instance "Root Explorer" that I wanted to use to replace wpa_supplicant) but when I click the link to view the details and install it, I get a dialog that says the detailed view can't be found. If I click OK, it goes back to the search results. If I instead click back, I can read the detailed view, but clicking "Install" results in it telling me the application can't be found. Looks like Google is blocking the app.
Click to expand...
Click to collapse
I've been having the same problem today. Lots of Apps in the market seem to be giving this response but if you try and see the details of and install a featured app then there's no problem. I think the Android Market may be having a few issues today. Try using the Android Market website instead, worked for me.
Sent from my A500 using XDA Premium App
I'll give that a go, thanks
yeah I noticed the same thing
I would also like to know where to rate and comment on apps
I hate it loses position on back. I like to browse through the app list to what is available for us honeycomb users but the fact that it goes back to the start makes this a pain in the *ss.
i agree, this is horrible, especially when browsing a long list. The marketplace is pretty average all round really.
Would it be too much to ask for a dedicated tablet section?
Just chiming in agreeing that this is a real pita.
Another +1 for the position loss on back being a pain in the ass, especially if you've just scrolled through 400 or so apps only to have to scroll through them again.
+1 here as well. I'd also love to see a section in the market just for the newest apps. I still can't figure out how to comment or rate anything there either. Some of the stuff I have tried and had to just uninstall I would love to be able to comment on. Any suggestions?
I use the online site
Regarding rating apps, here's what I've found:
Menu + Purchase History
Click the name - pick to open with browser
Rate it from the browser.
Yeah, it sucks. Honeycomb fail.
+1 on losing position in the marketplace when going back to it from an app page - very frustrating. I've also had numerous occasions when an app wouldn't properly download or install - the animated bar would continue but no notifications would show up and/or the install would fail leading to the animated bar on the app page continuing to animate but no progress. Going back then finding the app again then going into the app page and clicking install again seems to be the only way to kick start it.
The original Navigation (The blue arrow) app was awesome. It had live traffic updates and would re-route automatically and never dropped signal!
Now Google forced this new app on us, Navigation is no more but has now merged into Google Maps (it's a good thing but it's in beta)
Why the hell would I want to use a beta app?
BUGS ENCOUNTERED:
- If you manually press the power button to turn off the screen (whilst using the navigation), the route guidance will reset back to 'Select Destination' when you turn the screen back on!
That's so annoying and dangerous for me especially when you're on the motorway doing 70mph!!!
- Once you enter your destination and select 'Start' on the bottom right, there's a 50% chance the app will force the shutdown of the app.
This has happened often to me 50/50. Worst thing about it is, you can't just re-open the app or disable/enable GPS to fix this bug, you have to reboot your bloody phone!
- Map Orientation view messes up
Even though the original Navigation app had this bug, it was not as common as it is now. Also, there's a bigger delay in automated view change (when you turn direction, etc) This causes problems which forces you to zoom out of the route guide just to see ahead because the app is so stupidly slow to change direction at your pace.
- Stupid places of interest that you don't give a @~!* about!
Why can't I choose what I want to see on my map! I don't care about the best bars and shops in town when I'm on a mission!
Orientation bug is the worst and most annoying for me. Its never the constant behind the back POV... which is ANNOYING!
However, when I press the power button (while in navigation) so I can turn off the screen, and subsequently turn back on the screen, Maps FCs. Always. Once again, ANNOYING.
I felt like Google took 2 steps forward and 3 steps back with this one (while trying to hard to compete with Apple Maps).
Powering off the screen whilst navigating doesn't FC for me, but when I turn the screen back on, I have to click on maps to get navigation back, annoying
Sent via TCP/IP
So I guess all you guys have provided feedback to Google?!........
slaphead20 said:
So I guess all you guys have provided feedback to Google?!........
Click to expand...
Click to collapse
I did, I told them to give me back the old version and go beta test it on people who actually want to beta test it..
Remove new version and search for the old apk and don't update it .
jje
MazingerZed said:
I did, I told them to give me back the old version and go beta test it on people who actually want to beta test it..
Click to expand...
Click to collapse
That's very helpful feedback. They can take that right there and use it to improve the app. Not that stuff in the first post. That's useless information. Nope. The most useful information you can give them is a good whinge and a demand the old stuff back. Pfft, feedback, what's that?
Guys, it's this simple
Settings/application manager/maps/uninstall updates.......navigation comes back as separate app
So simple
MazingerZed said:
I did, I told them to give me back the old version and go beta test it on people who actually want to beta test it..
Click to expand...
Click to collapse
slaphead20 said:
Guys, it's this simple
Settings/application manager/maps/uninstall updates.......navigation comes back as separate app
So simple
Click to expand...
Click to collapse
But Slappy, do you really think someone who gave this as feedback on how to improve the app has the intelligence to know that?
Also the app will have passed Google's in house testing, they however don't have every single Android device, and every single stock and custom rom in existence therefore there could be device specific problems, have you asked people using other devices if they see the same problems?
After a large scale update most apps have teething problems, but they will fix them very soon.
slaphead20 said:
Guys, it's this simple
Settings/application manager/maps/uninstall updates.......navigation comes back as separate app
So simple
Click to expand...
Click to collapse
That's how I did it. Then used Titanium backup to detach maps from the market. No more updates
Sent from my GT-I9300 using xda premium
I've had a look around for answers for this and have found a few people asking about it on different sites but not on xda and no answers anywhere.
I've a moto 360, and want to know if there's a way to either keep the screen on indefinitely and/or stay within an application when the screen goes to sleep.
The best way to describe this is to use an example; when I go grocery shopping I like to use google keep on my watch to tick off items on my shopping list, the problem is every 10 seconds or so I find myself having to wake the watch, navigate to the keep app and open it. I appreciate this doesn't take long, but its a pain in the backside when you have to do it every 5 minutes (with my awful memory!)
Does anyone know a way to make this happen?
Thanks in advance.
orangejuice43 said:
I've had a look around for answers for this and have found a few people asking about it on different sites but not on xda and no answers anywhere.
I've a moto 360, and want to know if there's a way to either keep the screen on indefinitely and/or stay within an application when the screen goes to sleep.
The best way to describe this is to use an example; when I go grocery shopping I like to use google keep on my watch to tick off items on my shopping list, the problem is every 10 seconds or so I find myself having to wake the watch, navigate to the keep app and open it. I appreciate this doesn't take long, but its a pain in the backside when you have to do it every 5 minutes (with my awful memory!)
Does anyone know a way to make this happen?
Thanks in advance.
Click to expand...
Click to collapse
Wear mini launcher now has an option to force the app to stay open (and the watch stays lit) until you manually close it.
Bubble launcher has a "lock app" option. The the watch will go to sleep as normal, but that app will immediately reload when you wake the watch. (Keep goes right back to same place you were.)
"Pin An App for Android Wear" does the same as bubble launcher, without the launcher function.
Great stuff, thank you!
I couldn't get mini launcher to work, but pin an app works like a dream! thank you!
orangejuice43 said:
Great stuff, thank you!
I couldn't get mini launcher to work, but pin an app works like a dream! thank you!
Click to expand...
Click to collapse
I realized later that the stay-on ability is only in the beta release for now. If you go to the "wear mini launcher" community on google+, you can join the beta program. Or just wait, I guess.
So if anybody else like me is coming from the G2 and 3 you might be missing smart screen.. That little feature that detects your face while looking at the screen to keep the screen awake instead of fading out. I personally felt it a real convenience. I would like to get it back, I pulled the app from my G3 titled wise screen. I installed it like a normal app with success. I used activity launcher to try and launch it, but it fc's. So I'm guessing we'll need root to get it functional. When we do get root is there anyone else interested in joining me on this quest? I would really like to get this one up and running. I can't for the life of me understand why they left it off. I feel like I'm back on ics or jb with out it..
Try kinScreen from the playstore
It works great
whiskeybro said:
Try kinScreen from the playstore
It works great
Click to expand...
Click to collapse
Well on that note... Thanks lol
Swizzle82 said:
So if anybody else like me is coming from the G2 and 3 you might be missing smart screen.. That little feature that detects your face while looking at the screen to keep the screen awake instead of fading out. I personally felt it a real convenience. I would like to get it back, I pulled the app from my G3 titled wise screen. I installed it like a normal app with success. I used activity launcher to try and launch it, but it fc's. So I'm guessing we'll need root to get it functional. When we do get root is there anyone else interested in joining me on this quest? I would really like to get this one up and running. I can't for the life of me understand why they left it off. I feel like I'm back on ics or jb with out it..
Click to expand...
Click to collapse
I have to agree with you. I am so surprised they took it out. I spent 30 min on the phone trying to find it. I tried the app the other post recommended, not as good, it will never turn the phone off in the car when the phone is mounted and the car is moving.
I, too, was looking for the smartscreen settings. Was surprised that LG decided to remove it. Will try the above mentioned kinscreen later
Anyone know if Samsung removed it from the S6? They started the feature and it was one of the more useful features they added to Touchwiz. I was glad when LG copied it. Most of the other stuff was junk, but that was actually useful.
That sucks. I wonder if they removed smart screen to keep the screen from running down the battery.
Sent from my LG-E980 using XDA Free mobile app
You can try Smart Screen from the play store
https://play.google.com/store/apps/details?id=com.vjt.app.magicscreen
And iseeyou
https://play.google.com/store/apps/details?id=com.iseeyoulite
What's really weird is that the Smart Screen app is installed on the phone. Go to app manager, and check out the "All" list and there's Smart Screen. There's just no way to activate it.
ED2O9 said:
What's really weird is that the Smart Screen app is installed on the phone. Go to app manager, and check out the "All" list and there's Smart Screen. There's just no way to activate it.
Click to expand...
Click to collapse
I don't have the app at all on mine.. 811.
I don't show it listed on my sprint version.
Sent from my LGLS991 using Tapatalk
Here it is on the Verizon variant. Wow... this is the first time the Verizon version actually has something the others don't!
It's on the phone but doesn't seem to work. I don't see any place to enable it and creating an activity to open the app causes it to crash.
Never really worked for me on G2/3.
I miss this and have found an app on the play store that mimics it. It worked well for me on the G3.
Verizon has this. I disabled it though. It worked great on my G2 for the time I tested it. For me, I am typically using my phone while in the middle of doing something else. So it is a waste.
ED2O9 said:
What's really weird is that the Smart Screen app is installed on the phone. Go to app manager, and check out the "All" list and there's Smart Screen. There's just no way to activate it.
Click to expand...
Click to collapse
Not on mine H810. I am wondering if maybe they built something into the package? As since I have had mine, and if I'm using it or just looking at it the screen doesn't shut off.
ED2O9 said:
Here it is on the Verizon variant. Wow... this is the first time the Verizon version actually has something the others don't!
Click to expand...
Click to collapse
Droid_Junky said:
It's on the phone but doesn't seem to work. I don't see any place to enable it and creating an activity to open the app causes it to crash.
Click to expand...
Click to collapse
player911 said:
Verizon has this. I disabled it though. It worked great on my G2 for the time I tested it. For me, I am typically using my phone while in the middle of doing something else. So it is a waste.
Click to expand...
Click to collapse
On Verizon, you can see the service - it is not an app - BUT there are no Settings I can find or know of that actually allow you to activate it or interact with it in anyway. So it is "there" but seems to do nothing and cannot be setup.
EDIT: I used the hidden Verizon menu and found this "smart screen" but when you click on it, it forecloses and crashes. So, it is as if that first part of the services is there BUT the actual functionality is not as using the hidden Verizon menu I cannot activate it and access settings or turn it on to work - and I would think from that hidden menu, we should.
Lock-N-Load said:
On Verizon, you can see the service - it is not an app - BUT there are no Settings I can find or know of that actually allow you to activate it or interact with it in anyway. So it is "there" but seems to do nothing and cannot be setup.
EDIT: I used the hidden Verizon menu and found this "smart screen" but when you click on it, it forecloses and crashes. So, it is as if that first part of the services is there BUT the actual functionality is not as using the hidden Verizon menu I cannot activate it and access settings or turn it on to work - and I would think from that hidden menu, we should.
Click to expand...
Click to collapse
So is there no smart screen setting under display settings on verizon?
Swizzle82 said:
So is there no smart screen setting under display settings on verizon?
Click to expand...
Click to collapse
There is not