[Q] Professional ("hardcore") unbrick method(s) for N9005? - Galaxy Note 3 Q&A, Help & Troubleshooting

Hello.
Is there a professional "hardcore" unbrick method für a SM-N9005?
Status: The device start (after press the power button) in "download mode" ("ODIN MODE").
Could not do a normal boot
ODIN MODE
PRODUCT NAME: SM-N9005
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
REACTIVATION LOCK(KK): OFF
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
QUALCOM SECUREBOOT: ENABLE (CSB)
RP SWREV: S2, T2, A2, A3, P3
WRITE PROTECTION: ENABLE
UDC START
("Silver" is white, but I think, can not use white here on this site )
But KIES or ODIN can not "see" this device.
A handy (repair) shop has vainly tried to Flash this device with a "Octoplus".
But without opening the device.
Is there a better (more "invasive"?!) method?
For example with soldering wires to Pins on the Motherboard, and Flash directly the Memory Chips?
I have seen Videos with this method an a "Riff box". For example with a Galaxy Tab P1000.
I only need ONE method . ONE known apparatus that can do it successfully.
P.S.: Is there a better place for this question?
With "cracks" they know all methods?
Thanks.

Not sure if this will help but i'm posting it anyway
http://forum.xda-developers.com/showthread.php?t=2625332
Sent from my SM-N9005 using Tapatalk

Related

[Q] Samsung galaxy S4 gt-i9506 Could not do normal boot ODIN mode

hey everyone.
i have red hundreds of threads on this put when i start up my phone it says:
Could not do normal boot
ODIN MODE
PRODUCT NAME: GT-I9506
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
QUALCOMM SECUREBOOT: ENABLE
RP SWREV: S1, T1, R1, A1, P1
WRITE PROTECTION: ENABLE
UDC Start
i have tried to pull out the battery and the sim card. it didn't work
i have tried reinstalling the stock firmware with odin3 v1.85
i have tried the same with samsung kies 3 it doesn't even recognise (sorry if mispelled) the device
please help
last but not least. does this means my warranty wont work?

[Q] Trying to unroot

I have unrooted my galaxy s3 neo gt-9301, but i get something different in odin mode than that I see in videos. Odin mode on my phone:
ODIN MODE
PRODUCT NAME: GT-I9300I
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
QUALCOMM SECUREBOOT: ENABLE (CSB)
AP SWAEV: S1, T1, R1, A1, P1
UDC START
I want to repair my phone under warranty. So custom binary counter needs to be 0, but i dont see a custom binary counter.

Could not do normal boot.

I installed the with the newest ODIN version the newest Stock Firmware for my N910F.
Then i installed NOBLE ROM UX and i tried RAM ROM.
But with all two custom ROMS i have a boot problem.
The phone can't restart automatically. I must take out the battery an wait one minuten.
Then it comes the error message:
Could not do normal boot.
dd : mmc_read failed
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-N910F
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
REACTIVATION LOCK: OFF
KNOX WARRANTY VOID: 0x0
QUALCOMM SECUREBOOT: ENABLE (CSB)
AP SWREV: S1, T1, R1, A1, P1
SECURE DOWNLOAD : ENABLE
UDC START
Who can me help me with this error?

Softbricked sm-g901f and out of ideas

Hey there,
i probably bricked my device while trying to root it. Its an sm-g901f and right now it shows me the recovery screen with the message "Firmware upgrade encountered an issue. Please select recovery mode in Kies & and try again." Of course I tried but the Samsung download-page wants me to get "Smart Switch" which couldn't do anything noticeable.
In the left top corner it reads:
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-G901F
CURRENT BINARY: Custom
SYSTEM STATUS: Official
REACTIVATION LOCK: OFF
KNOX WARRANTY VOID: 0x0
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1 R1, A1, P1
SECURE DOWNLOAD: ENABLE
UDC START
Unsupported dev_type
Unsupported dev_type
Is there any hope? I am quite computer savvy but only a mere beginner with android. Can someone point me in the right direction to fix the device?

Problem with digitizer ?

Hello , xda-developers,
I have a SM-N910F, and "played" today with the ROM and recovery, trying to root and put a custom recovery.
The Odin part worked smoothly, changed a couple of times the ROM but not succeeding the part with recovery.
After a wrong file being flashed (n915f-cwm-recovery-6.0.5.1(1128)), the screen mistakes the position of my finger onto screen.
Tried flashing stock ROM for it (COA-N910FXXU1ANK4_N910FCOA1ANK1-20141117 -Android 4.4.4 and N910FXXU1DRI2_N910FCOA1DQI1_COA - Android 6.0.1 ),no luck.
Screen not recognise corectly whereis my finger on screen, but the stilus work perfect, also mouse with OTG seems to work fine.
What is to be done to revert this.
Can be fixable?
THX!
find the solution on "https://www.youtube.com/watch?v=eAyZAa8ck8U" sorry for bother, although I would like to resolve the problem with the custom recovery and rooted with Magisk, what are the RIGHT steps
In IDIN mode I have on screen:
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-N910F
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
REACTIVATION LOCK: OFF
KNOX WARRANTARY VOID: 0x1 (4)
QUALCOM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, R1, A1, P1
SECURE DOWNLOAD : ENABLE
UDC START
MasterMarius said:
find the solution on "https://www.youtube.com/watch?v=eAyZAa8ck8U" sorry for bother, although I would like to resolve the problem with the custom recovery and rooted with Magisk, what are the RIGHT steps
In IDIN mode I have on screen:
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-N910F
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
REACTIVATION LOCK: OFF
KNOX WARRANTARY VOID: 0x1 (4)
QUALCOM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, R1, A1, P1
SECURE DOWNLOAD : ENABLE
UDC START
Click to expand...
Click to collapse
Open dialer and Dial *#2663#
Press TSP FW UPDATE
Wait until it finished
Reboot device
Done.
This will recalibrate your touch as normal to default.

Categories

Resources