My 5 month old un-rooted Note 3 (SM-N9005) which i bought in Norway just out of nowhere re started and now just almost every app or processes stops and eventually it crashes and restarts.
Any ideas what's happening? I'm not in the country atm so am really hoping to fix it as i really need it.
It doesn't seem to have mobile network either, not that it stays on long enough to use it.
Knerten95 said:
My 5 month old un-rooted Note 3 (SM-N9005) which i bought in Norway just out of nowhere re started and now just almost every app or processes stops and eventually it crashes and restarts.
Any ideas what's happening? I'm not in the country atm so am really hoping to fix it as i really need it.
It doesn't seem to have mobile network either, not that it stays on long enough to use it.
Click to expand...
Click to collapse
Easiest way is to boot into recovery (Hold Volume Up, Home, Power before you see SAMSUNG GALAXY NOTE SM-N9005) and wipe cache. If that doesn't work, go back into recovery and perform a Factory Reset.
nicholaschum said:
Easiest way is to boot into recovery (Hold Volume Up, Home, Power before you see SAMSUNG GALAXY NOTE SM-N9005) and wipe cache. If that doesn't work, go back into recovery and perform a Factory Reset.
Click to expand...
Click to collapse
Damn, totally forgot to write that, but i've both wiped cache and factory reset it but get the same results.
Knerten95 said:
Damn, totally forgot to write that, but i've both wiped cache and factory reset it but get the same results.
Click to expand...
Click to collapse
Do you have access to a computer? If you do, you can try flashing stock using Odin in Download mode.
Download the Odin file here: http://www.sammobile.com/firmwares/
Flash it under AP.
I can try that. Will it void my warranty? Also how and where do i get the stock firmware from and which do i need? My ap is: N9005XXUEND5
Knerten95 said:
I can try that. Will it void my warranty? Also how and where do i get the stock firmware from and which do i need? My ap is: N9005XXUEND5
Click to expand...
Click to collapse
The Sammobile link, type in your firmware N9005XXUEND5 into the Firmware box, then it will search it for you. You also could just type N9005 and choose the latest based on your region.
No it will not void your warranty.
nicholaschum said:
The Sammobile link, type in your firmware N9005XXUEND5 into the Firmware box, then it will search it for you. You also could just type N9005 and choose the latest based on your region.
No it will not void your warranty.
Click to expand...
Click to collapse
I flashed it with a stock but it's no different
Knerten95 said:
I flashed it with a stock but it's no different
Click to expand...
Click to collapse
That's very weird.
Flashing stock should essentially fix the system files that are broken.
You could try root it, wiping all partitions, then reinstalling a ROM.
nicholaschum said:
That's very weird.
Flashing stock should essentially fix the system files that are broken.
You could try root it, wiping all partitions, then reinstalling a ROM.
Click to expand...
Click to collapse
But that'll void my guarantee wouldn't it? If not I'll try it, otherwise I'll just have to wait untill i get home and take it back to the shop :/
Knerten95 said:
But that'll void my guarantee wouldn't it? If not I'll try it, otherwise I'll just have to wait untill i get home and take it back to the shop :/
Click to expand...
Click to collapse
Yeah it will. I guess that's the only way around this for now.
nicholaschum said:
Yeah it will. I guess that's the only way around this for now.
Click to expand...
Click to collapse
Ok, thanks for your help. I guess i best wait until the shop takes it in and if they won't help (although it's under guarantee) then i'll root it
Related
Hi,
I've a big problem with my note 3 (SM-9005).
Root and under Foxhound Diamonds ROM 1.2
All worked perfectly during one month and I don't do any modifcation last month.
Just i flashed Faux's recovery 2 days ago.
After that, Note3 works perfectly. But I had needed to do a reboot. But after reboot I had many problems. PIN code was not query after reboot, I have no signal and after several seconds it's show me "system process doesn't respond" wait or close?. Then the phone reboot and reboot until I removed the battery.
I tried to reflash the rom but I had still the same problem. I also tried to reflash a Samsung firmware with ODIN. Flash was OK, but problem is still there. No signal, and reboot after system process crash...
Any idea? My Knox counter is at 0x1...
Sorry for my poor English.
pystolero said:
Hi,
I've a big problem with my note 3 (SM-9005).
Root and under Foxhound Diamonds ROM 1.2
All worked perfectly during one month and I don't do any modifcation last month.
Just i flashed Faux's recovery 2 days ago.
After that, Note3 works perfectly. But I had needed to do a reboot. But after reboot I had many problems. PIN code was not query after reboot, I have no signal and after several seconds it's show me "system process doesn't respond" wait or close?. Then the phone reboot and reboot until I removed the battery.
I tried to reflash the rom but I had still the same problem. I also tried to reflash a Samsung firmware with ODIN. Flash was OK, but problem is still there. No signal, and reboot after system process crash...
Any idea? My Knox counter is at 0x1...
Sorry for my poor English.
Click to expand...
Click to collapse
Hi, from the sounds of it you had the same problem I had, I followed what this guy said in this thread and it worked perfectly again: http://forum.xda-developers.com/showthread.php?t=2540822 Hope it works for you too
danielsf said:
Hi, from the sounds of it you had the same problem I had, I followed what this guy said in this thread and it worked perfectly again: http://forum.xda-developers.com/showthread.php?t=2540822 Hope it works for you too
Click to expand...
Click to collapse
Thank you for your answer. But Root was done Two month ago by myself. So...
And I had flashed a stock Rom with ODIN. But when we flash a stock ROM with ODIN, we lost the root. Why I Still had the same problems after flashing a stock rom?
pystolero said:
Thank you for your answer. But Root was done Two month ago by myself. So...
And I had flashed a stock Rom with ODIN. But when we flash a stock ROM with ODIN, we lost the root. Why I Still had the same problems after flashing a stock rom?
Click to expand...
Click to collapse
Because you corrupted your EFS partition flashing either a kernel that didn't like the phone or a ROM that had issues, (Samsung Note 3 is prone to EFS issues currently). And it needed rebuilt. Re-Flashing stock in most cases won't rebuild it but sometimes it does, then you have you use this to fix. No need to go back to stock or wipe or anything, just flash it and voila! fixed
radicalisto said:
Because you corrupted your EFS partition flashing either a kernel that didn't like the phone or a ROM that had issues, (Samsung Note 3 is prone to EFS issues currently). And it needed rebuilt. Re-Flashing stock in most cases won't rebuild it but sometimes it does, then you have you use this to fix. No need to go back to stock or wipe or anything, just flash it and voila! fixed
Click to expand...
Click to collapse
Really thanks. I'll try this soon! And thanks for the explication. I hope it will work!
Ok, I've not my note 3 with me. I tried to return it to after-sales services. But Samsung said that I had flashed the device and that warranty is broken...
I'm waiting the estimate but I think it will be too expensive. I want try to repair it by myself but they have not brought back the phone yet.
But the last solution :
radicalisto said:
Because you corrupted your EFS partition flashing either a kernel that didn't like the phone or a ROM that had issues, (Samsung Note 3 is prone to EFS issues currently). And it needed rebuilt. Re-Flashing stock in most cases won't rebuild it but sometimes it does, then you have you use this to fix. No need to go back to stock or wipe or anything, just flash it and voila! fixed
Click to expand...
Click to collapse
needs to have a custom recovery. But it seems to me that after i had flashed the stock firmware, I didn't have the custom recovery but only the stock... How I can flash the file? Is it possible with the stock recovery?
Grab TWRP or CWM recoveries and ODIN, boot the phone into download mode - when it is off. Load up one of your custom recoveries in to PDA - hit start and let it install. Once it's done your phone will still bootloop, so take the battery out. Put back in - hold volume up, power button and home button - it'll boot into recovery, then just flash your efs fix zip via the install button
Sent from my SM-N9005 using XDA Premium 4 mobile app
Great! I'll try as soon as they brought me back the phone.
I didn't knew how to flash custom recovery with ODIN.
THX!
radicalisto said:
Because you corrupted your EFS partition flashing either a kernel that didn't like the phone or a ROM that had issues, (Samsung Note 3 is prone to EFS issues currently). And it needed rebuilt. Re-Flashing stock in most cases won't rebuild it but sometimes it does, then you have you use this to fix. No need to go back to stock or wipe or anything, just flash it and voila! fixed
Click to expand...
Click to collapse
+1. This is because EFS partition is corrupted
Just flash that script radicalisto linked to, it will fix your phone
Ratata82 said:
+1. This is because EFS partition is corrupted
Just flash that script radicalisto linked to, it will fix your phone
Click to expand...
Click to collapse
I'm hopeful! I'll test it as soon as i've recover my phone from the after-service.
pystolero said:
I'm hopeful! I'll test it as soon as i've recover my phone from the after-service.
Click to expand...
Click to collapse
Did you manage to get your phone back up and running again?
Best regards
Ratata82 said:
Did you manage to get your phone back up and running again?
Best regards
Click to expand...
Click to collapse
I'm still waiting for the after-service.
Samsung refuse my device. Warranty is broken because I flashed it. They saw Knox's counter of course...
They asked 250€ ~ 340$ to repair it. I refused I prefer to try your solution and i'm waiting. The phone will be back in average the 15th january.
Ratata82 said:
Did you manage to get your phone back up and running again?
Best regards
Click to expand...
Click to collapse
radicalisto said:
Because you corrupted your EFS partition flashing either a kernel that didn't like the phone or a ROM that had issues, (Samsung Note 3 is prone to EFS issues currently). And it needed rebuilt. Re-Flashing stock in most cases won't rebuild it but sometimes it does, then you have you use this to fix. No need to go back to stock or wipe or anything, just flash it and voila! fixed
Click to expand...
Click to collapse
Some news!
I just recover my phone!
I have immediately flashed the recovery, and flash the file you got me. And.... it's running!!!! :laugh::laugh::laugh::laugh:
I'm so happy!!! What a shame for Samsung! They said in the estimate 340$ to repair it with a change of motherboard while just a little flash was enough.
If you have a paypal adress, radicalisto, I buy you a beer!
Glad you got sorted - I cannot take credit for that script I'm afraid.. If you head over to the thread it was posted in you can thank the guy who made it
Sent from my SM-N9005 using XDA Premium 4 mobile app
radicalisto said:
Glad you got sorted - I cannot take credit for that script I'm afraid.. If you head over to the thread it was posted in you can thank the guy who made it
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
It makes me happy, but you're right, i will thank the man who made the script!
My phone used to have Arrow rom installed. Now I am trying to flash the stock rom 4.2.2 back through odin, now stuck on Samsung Logo, does anyone how to fix that? There are many 4.2.2 roms for download from different country, I don't know which one will work.
benzso63 said:
My phone used to have Arrow rom installed. Now I am trying to flash the stock rom 4.2.2 back through odin, now stuck on Samsung Logo, does anyone how to fix that? There are many 4.2.2 roms for download from different country, I don't know which one will work.
Click to expand...
Click to collapse
did you wipe data and cache after flashing?
no, right after flash with odin, now it is stuck on Samsung screen. Should I goto recovery mode and wipe data and cache? Then see if it boots up ?
samersh72 said:
did you wipe data and cache after flashing?
Click to expand...
Click to collapse
benzso63 said:
no, right after flash with odin, now it is stuck on Samsung screen. Should I goto recovery mode and wipe data and cache? Then see if it boots up ?
Click to expand...
Click to collapse
yes
benzso63 said:
My phone used to have Arrow rom installed. Now I am trying to flash the stock rom 4.2.2 back through odin, now stuck on Samsung Logo, does anyone how to fix that? There are many 4.2.2 roms for download from different country, I don't know which one will work.
Click to expand...
Click to collapse
Why dont you flash a 4.2.2 from your country then ? Try this first . Remove ur battery for 10 sec and put it back . Then press and hold power+volumeup in order to reach recovery . Then wipe cache/factory reset then reboot. Have a nice day.
Sent from Hell ?
It works now! Thanks a lot.
samersh72 said:
yes
Click to expand...
Click to collapse
Do you know where I can find the 4.3.3 rom for United States?
samersh72 said:
yes
Click to expand...
Click to collapse
benzso63 said:
Do you know where I can find the 4.3.3 rom for United States?
Click to expand...
Click to collapse
4.3.3? Maybe is 4.3 or 4.4 u are asking for? Coz 4.3.3 dont exist
Joku1981 said:
4.3.3? Maybe is 4.3 or 4.4 u are asking for? Coz 4.3.3 dont exist
Click to expand...
Click to collapse
Omg sorry. Its 4.3
Do you know?
benzso63 said:
Omg sorry. Its 4.3
Do you know?
Click to expand...
Click to collapse
No. But for know ur zone code only u need conect it to Kies and take a look the 3 letters close to the CSC btw (). Knowing this we can take a look if u have any 4.3 firmware available for ya
Repulsa said:
Why dont you flash a 4.2.2 from your country then ? Try this first . Remove ur battery for 10 sec and put it back . Then press and hold power+volumeup in order to reach recovery . Then wipe cache/factory reset then reboot.
Click to expand...
Click to collapse
I have the same issue but my phone refuses to go into Recovery. I'm attempting to flash stock UK ROM via Odin. I didn't do a full factory wipe beforehand, didn't think I had to but wondering now whether I should have?.......have I bricked my S4? I can get into Download mode if I press Vol Up quickly or it reboots instantly, very strange.
Anyone got any thoughts how I might fix this?
Hello, i'm here for helping my friend. My friend's HH is Galaxy 4, bought at Guang Zhou China. Official Samsung China. After went to Mt.Bromo,may that's too cold, the problems are :
HH suddenly can't booting. Just appear until logo samsung and then suddenly off.
Can't launch stock recovery mode (vol up+home+power)
but CAN launch download mode (vol down+home+power).
HH can't appear status of charging when it's charge but maybe the battery is charging. Maybe.
All are still official. Maybe Android 4.2.2, but can't sure.
Anyone can help me fix this phone? Step by step please help...Thanks all
Please i alredy post on another room, but didnt get help
Running an Australian N9005.
I was running Temaseks unofficial CM11 build just fine. Got bored and wanted to go back to a more Samsung styled phone.
Decided to flash X-Note. As I'd used it before CM11. It worked fine then.
Attempted to flash X-Note but it wouldn't boot, stuck at initial screen with the Kernel warnings at the top of the screen. Was told it was because I hadn't got the new 4.4 bootloader.
I was told to follow the instructions here: http://forum.xda-developers.com/showpost.php?p=46223545&postcount=2
Which I did.
Using these download links and instructions: http://forum.xda-developers.com/showthread.php?p=49931269
That fixed the boot issue. I suppose I'm not on the 4.4 bootloader.
However when I booted up the stock Polish ROM, the initial Samsung Setup Wizard would crash at the end of the setup and force me back to the start of the setup. Tried ignoring it and just flashing the custom recovery and then XNote. Same issue, the setup wizard in XNote crashes as well.
Someone then told me I should try repartitioning the device using a PIT. I don't know what that is, but it was suggested.
Using this ROM: https://mega.co.nz/#!QVwlVDgJ!QyAxmDMcsIA-56cX_28Ua2aPZLcJATVvdM07LOs0V10
And this PIT: http://forum.xda-developers.com/showpost.php?p=50614669&postcount=77
Completes successfully.
Same issue............... That being a third separate ROM (official? at that)....
Samsung Setup Wizard crashes...
I even tried flashing XNote and removing the setup wizard just to get past it. That fixes it for about 10 minutes or so. After about 10 minutes of use the phone freezes and I have to hold the power button to force it to restart. If I leave the phone off, it still freezes, as soon as I try to unlock it it freezes and need to force restart.
I really don't know what to do now... Any help guys? I'm trying my best here...
Please, if you need any more information, please ask.
Might not help, but have you wiped your phone clean using custom recovery ( data,cache, dalvik, internal sd ) before flashing xnote or factory reset on recovery when on stock?
Do you have reactivation lock enabled?
Sent from my fingers to your face using my Samsung Galaxy Note 3!
hey_joe said:
Might not help, but have you wiped your phone clean using custom recovery ( data,cache, dalvik, internal sd ) before flashing xnote or factory reset on recovery when on stock?
Click to expand...
Click to collapse
Yes.
nicholaschum said:
Do you have reactivation lock enabled?
Click to expand...
Click to collapse
No.
This has puzzled me, not sure why it's still acting up especially after re-partitioning and flatlining everything.
radicalisto said:
This has puzzled me, not sure why it's still acting up especially after re-partitioning and flatlining everything.
Click to expand...
Click to collapse
Yes indeed. I'm very confused...
So... I don't want to get ahead of myself, but my phone seems to have sorted itself out...
I decided to just send it back to the carrier to get it replaced. So I decided to just flash the official Firmware again. (I accidentally left repartition ticked)
Once it started I thought... Oh ****... But I was sending it back anyway so who cares. (the carrier said they will just swap it for me if they can see it not working)
So I let it finish and turn it on to see what happens, run through the setup to make sure it still crashes at the same spot so I can show them... and it doesn't crash... wtf?
So I flash the custom recovery and XNote... And it seems to be working now. Now freezing, no nothing... I... I don't know...
Crazy, least it appears somewhat sorted lol
radicalisto said:
Crazy, least it appears somewhat sorted lol
Click to expand...
Click to collapse
So far, yeah... I think I got the runt of the litter or something... Haha
Reynbow said:
So far, yeah... I think I got the runt of the litter or something... Haha
Click to expand...
Click to collapse
Just out of curiosity, as I see you have an AU model, did you buy it from Kogan? -- Reason I ask is that they used HK firmware on some models and HK models have issues flashing normal firmware (similar to the issue you had)
radicalisto said:
Just out of curiosity, as I see you have an AU model, did you buy it from Kogan? -- Reason I ask is that they used HK firmware on some models and HK models have issues flashing normal firmware (similar to the issue you had)
Click to expand...
Click to collapse
Not from Kogan, no. From Optus. Pretty standard.
Hi,
Did a OTA upgrade to 4.4.2, and now ive got aloth of problems....
Is there a way to downgrade to 4.3, that firmware worked flawless for me.
Mgacool
mgacool said:
Hi,
Did a OTA upgrade to 4.4.2, and now ive got aloth of problems....
Is there a way to downgrade to 4.3, that firmware worked flawless for me.
Mgacool
Click to expand...
Click to collapse
Once you've upgraded to 4.4.2 there's no returning to 4.3 bud - sorry
Why what problems you encountering ?
11calcal said:
Once you've upgraded to 4.4.2 there's no returning to 4.3 bud - sorry
Why what problems you encountering ?
Click to expand...
Click to collapse
Dam :\
Phone freez up for no good reason.
It gets extreme hot when charging
programs will not start.
Takes long time to connect to wireless
cant send SMS
so this update is crap om this phone, it was my wifes phone and now she is pissed hehe
What i have tried to do, reset. uploded new version of the firmware from samfw, clear chashe, factory reset. nothing works...
I have a S4 also, and now im afraid to update my phone. I dont want to **** up mine also
Mga
mgacool said:
Dam :\
Phone freez up for no good reason.
It gets extreme hot when charging
programs will not start.
Takes long time to connect to wireless
cant send SMS
so this update is crap om this phone, it was my wifes phone and now she is pissed hehe
What i have tried to do, reset. uploded new version of the firmware from samfw, clear chashe, factory reset. nothing works...
I have a S4 also, and now im afraid to update my phone. I dont want to **** up mine also
Mga
Click to expand...
Click to collapse
that's strange... try flashing a firmware with another csc.. wipe everything and reflash it
ongbac said:
that's strange... try flashing a firmware with another csc.. wipe everything and reflash it
Click to expand...
Click to collapse
Done that to. Tried:
I9505XXUFNB8_I9505TENFNB1_I9505XXUFNB8_HOME.tar.md5
I9505XXUEML6_I9505TENEML1_I9505XXUEML6_HOME.tar.md5
Same problem with both of them :/
mgacool said:
Done that to. Tried:
I9505XXUFNB8_I9505TENFNB1_I9505XXUFNB8_HOME.tar.md5
I9505XXUEML6_I9505TENEML1_I9505XXUEML6_HOME.tar.md5
Same problem with both of them :/
Click to expand...
Click to collapse
Try this mate , boot into recovery do a factory reset/Wipe cache and then reboot and Quickly press and hold power+Voldown in order to boot into downloadmode , Flash the stock rom and once its done... the phone should reboot automatically , and then Hold and press Power+VolumeUP that should boot your phone into recovery mode... Now do a factory reset/wipe cache and reboot your phone.. .Before the initial setup, Just dont do anything to your phone for atleast 4 to 5 minutes, Let it settle and then proceed with the initial setup.
mgacool said:
Done that to. Tried:
I9505XXUFNB8_I9505TENFNB1_I9505XXUFNB8_HOME.tar.md5
I9505XXUEML6_I9505TENEML1_I9505XXUEML6_HOME.tar.md5
Same problem with both of them :/
Click to expand...
Click to collapse
Do a factory reset :highfive:
Joku1981 said:
Do a factory reset :highfive:
Click to expand...
Click to collapse
Done that to. Same problems after factory reset
Take it to Samsung service centre.
mgacool said:
Done that to. Tried:
I9505XXUFNB8_I9505TENFNB1_I9505XXUFNB8_HOME.tar.md5
I9505XXUEML6_I9505TENEML1_I9505XXUEML6_HOME.tar.md5
Same problem with both of them :/
Click to expand...
Click to collapse
hi hon
i used
BL_I9505XXUFNAD_481100_REV06_user_low_ship_MULTI_CERT.tar.md5
i did download
I9505XXUFNB9_I9505NEEFNB2_I9505XXUFNB9_HOME.tar.md5
but used the BL_I9505XXUFNAD_481100_REV06_user_low_ship_MULTI_CERT.tar.md5 instead and i had no probs with it
i was facing the same problems but when i did Wipe partition data and factory reset/Wipe cache every thing was good.
now it's fast and good
Hello, I came across this problem will restarting my phone after deleting some stock apps with Titanium backup. I might have messed up/deleted some important applications and caused this. could anyone help me with this ?
thanks
faurfaur said:
you will need to flash it with odin
Click to expand...
Click to collapse
Flash what ? sorry, i'm kinda a noob at this kinda stuff
David Blackbone said:
Flash what ? sorry, i'm kinda a noob at this kinda stuff
Click to expand...
Click to collapse
Find your firmware. If yours is G935A model, look for the PG1 fw.
Flash with Odin.
Literally only a few clicks away.
This will wipe everything so I'd suggest trying to see if you can save anything worth saving on your phone to a computer.
Sent from my SAMSUNG-SM-G935A using Tapatalk
David Blackbone said:
Flash what ? sorry, i'm kinda a noob at this kinda stuff
Click to expand...
Click to collapse
You'll need to either flash the stock firmware:
http://forum.xda-developers.com/att-s7-edge/how-to/stock-s7-edge-attg935aatt2apg1-firmware-t3431187
Or the "U-model" firmware:
http://forum.xda-developers.com/att-s7-edge/how-to/samsung-sm-935u-firmware-install-guide-t3411451
David Blackbone said:
Hello, I came across this problem will restarting my phone after deleting some stock apps with Titanium backup. I might have messed up/deleted some important applications and caused this. could anyone help me with this ?
thanks
Click to expand...
Click to collapse
Best is if you go back to AT&T and let them know about problem. They may replace your phone.
norbarb said:
Best is if you go back to AT&T and let them know about problem. They may replace your phone.
Click to expand...
Click to collapse
Don't listing to this guy. Your phone is rooted so your warranty is void and they won't do anything. Try a data factory reset in recovery first and wipe cache. It probly won't work but if it does it beats reflashing. Most likely won't work though. Your pretty much going to have to reflash it with Odin
I did this to mine as well deleting Samsung apps.
rob219 said:
Don't listing to this guy. Your phone is rooted so your warranty is void and they won't do anything. Try a data factory reset in recovery first and wipe cache. It problem won't work but if it does it beats refreshing. Most likely won't work though. Your pretty much going to have to refresh it with Odin
I did this to mine as well deleting Samsung apps.
Click to expand...
Click to collapse
yeah , doing the first option doesn't work. vie tried resetting it multiple times , never worked. ill try your next option out .
rob219 said:
Don't listing to this guy. Your phone is rooted so your warranty is void and they won't do anything. Try a data factory reset in recovery first and wipe cache. It problem won't work but if it does it beats refreshing. Most likely won't work though. Your pretty much going to have to refresh it with Odin
I did this to mine as well deleting Samsung apps.
Click to expand...
Click to collapse
InsertCleverUsernameHere said:
You'll need to either flash the stock firmware:
http://forum.xda-developers.com/att-s7-edge/how-to/stock-s7-edge-attg935aatt2apg1-firmware-t3431187
Or the "U-model" firmware:
http://forum.xda-developers.com/att-s7-edge/how-to/samsung-sm-935u-firmware-install-guide-t3411451
Click to expand...
Click to collapse
thanks for this link, i couldn't find this firmware anywhere
Well its fixed ! Just want to say thanks guys, you saved me $200 dollars and probably hours on the phone with the dumb at&t workers :silly:
rob219 said:
Don't listing to this guy. Your phone is rooted so your warranty is void and they won't do anything. Try a data factory reset in recovery first and wipe cache. It probly won't work but if it does it beats reflashing. Most likely won't work though. Your pretty much going to have to reflash it with Odin
I did this to mine as well deleting Samsung apps.
Click to expand...
Click to collapse
Hey my s7 edge got stuck on white logo screen and I did that data factory reset and wipe cache partion it worked but every root app says I don't have root yet my system say custom what do I do
Please Help
David Blackbone said:
Hello, I came across this problem will restarting my phone after deleting some stock apps with Titanium backup. I might have messed up/deleted some important applications and caused this. could anyone help me with this ?
thanks
Click to expand...
Click to collapse
Im having the same problem, S7 edge Smg935a is stuck on at&t boot screen, happened after deleting apps through titanium... ive done factory resets, cleared cache, literally everything, and ive even tried multiple flashes on the device..
---------- Post added at 01:47 AM ---------- Previous post was at 01:42 AM ----------
markied26 said:
Im having the same problem, S7 edge Smg935a is stuck on at&t boot screen, happened after deleting apps through titanium... ive done factory resets, cleared cache, literally everything, and ive even tried multiple flashes on the device..
Click to expand...
Click to collapse
when i try flashing with odin, i always come up model mistake error.. and when i tried and factory reset i always have dm-verity verifcation failed... im so lost!