Related
Pulling what little hair I haver left out at this point. 8 hours now, and Odin is stuck during factoryfs.rfs. Never makes it past this point.
I've tried every trick I've come across in XDA and elsewhere (re-starting odin / unplugging & replugging / device drivers / all versions of Odin / etc)
I even tried Heimdall (can't find boot loader files anywhere to plug in to Heimdall Frontend.
I'm lost now, with seemingly every idea tried and failed. Phone will not boot, as Odin fails without finishing.
Anyone faced similar and come through it?
I can get into DL mode just fine...I've googled everything I can think of.
I had that happened before with odin 1.2. Updated to 1.7 and everything worked afterward.
Sent from my SGH-T959 using XDA App
yeah used both versions
sometimes using a different computer solves the problem for me.
Had this happen too. In my case switching to a USB port in the back of my PC rather than one of the ports on the front of my PC case fixed the issue. Try Odin'ing with your other USB ports?
Finally got it working...had a corrupted JFD file...replaced and all is well. Thx for the help
having same problem
I'm having the same problem. What is a corrupted JFD file and how do I fix it?
Ran into the same issue. I checked "Phone Bootloader Update" in odin 1.82 and it finally worked. Not sure why, but I'll take it.
Bandage said:
Finally got it working...had a corrupted JFD file...replaced and all is well. Thx for the help
Click to expand...
Click to collapse
What file is that, and how did you fix it? I am stuck with the same problem and nothing seems to work...
^ check my signature for going back to stock thread. If you have an operational phone, you should be good with my guide.
ccole22653 said:
What file is that, and how did you fix it? I am stuck with the same problem and nothing seems to work...
Click to expand...
Click to collapse
Its the .tar file used for pda sometimes it gets damaged when you download it just need to redownload it
Sent from my SGH-T959 using XDA App
Bandage said:
Pulling what little hair I haver left out at this point. 8 hours now, and Odin is stuck during factoryfs.rfs. Never makes it past this point.
I've tried every trick I've come across in XDA and elsewhere (re-starting odin / unplugging & replugging / device drivers / all versions of Odin / etc)
I even tried Heimdall (can't find boot loader files anywhere to plug in to Heimdall Frontend.
I'm lost now, with seemingly every idea tried and failed. Phone will not boot, as Odin fails without finishing.
Anyone faced similar and come through it?
I can get into DL mode just fine...I've googled everything I can think of.
Click to expand...
Click to collapse
I finally found what the problem was, my stock tar file was not completely downloaded and was 180MB vs 291MB what it should have been. Redownloaded, tried again and it worked perfect. To those that still have the problem, try re downloading the files instead of trying the same one over and over, worked for me ;-)
hi i use to have the same problem. what i do is this.
1) Installed Odin and all the other files in a folder in the root directory of my computer (C:\). Don't know if this helps at all, just covering everything I've done.
2) Took battery out, SIM out and SDcard out.
3) put battery back in....leave phone off.
4) Start Odin using administrative
5) Now here is where I'm different: Hold down Volume up & down at the same time, don't press power.
6) While holding down the volume buttons together, plug the USB (already plugged into computer) into the Phone (Vibrant in my case). Should automatically go into Download mode, no fancy timing here.
7) Select your PIT and PDA (TAR) files
8) Click start....should immediately jump past cache.rfs
9) Leave it all alone until you get the green pass in Odin.
i really dont know if some of the points are important but it work.. i wish that can help you.
blemish31 said:
hi i use to have the same problem. what i do is this.
1) Installed Odin and all the other files in a folder in the root directory of my computer (C:\). Don't know if this helps at all, just covering everything I've done.
2) Took battery out, SIM out and SDcard out.
3) put battery back in....leave phone off.
4) Start Odin using administrative
5) Now here is where I'm different: Hold down Volume up & down at the same time, don't press power.
6) While holding down the volume buttons together, plug the USB (already plugged into computer) into the Phone (Vibrant in my case). Should automatically go into Download mode, no fancy timing here.
7) Select your PIT and PDA (TAR) files
8) Click start....should immediately jump past cache.rfs
9) Leave it all alone until you get the green pass in Odin.
i really dont know if some of the points are important but it work.. i wish that can help you.
Click to expand...
Click to collapse
I have been having the same problem here. I am only able to enter download mode, my phone won´t boot, not even cwm.
I have been trying to install a new rom via Odin but it gets stuck at factoryfs.rfs , I have tried everything even all said in this thread it still wont work. Also tried checked and downloaded several times the files as you mentioned.
Please, if anyone knows what else to try.
PS: I also tried installing other roms rather than darkys resurrection and they would all get stuck in some point during the installation via Odin, really wierd, please help!!!
Dude, you'd be better off starting a new thread in the Q&A section.
Secondly, do a lot more reading. You cannot flash custom ROMs with Odin. Odin is just used for flashing back to stock.
dpaul007 said:
Secondly, do a lot more reading. You cannot flash custom ROMs with Odin. Odin is just used for flashing back to stock.
Click to expand...
Click to collapse
Actually if you read up on DarkyRom, the Darky team makes Odin .tar's of their base roms. So yes you can Odin a custom rom. It's actually easy to make a Odin tar ball of any Samsung TWiz based rom on your phone.
Bandage said:
Pulling what little hair I haver left out at this point. 8 hours now, and Odin is stuck during factoryfs.rfs. Never makes it past this point.
I've tried every trick I've come across in XDA and elsewhere (re-starting odin / unplugging & replugging / device drivers / all versions of Odin / etc)
I even tried Heimdall (can't find boot loader files anywhere to plug in to Heimdall Frontend.
I'm lost now, with seemingly every idea tried and failed. Phone will not boot, as Odin fails without finishing.
Anyone faced similar and come through it?
I can get into DL mode just fine...I've googled everything I can think of.
Click to expand...
Click to collapse
What files are you flashing?? Are you flashing with or without a .pit?
Here is a guide from XDA for Flashing. Its easy to follow and ive never had an issue with it. Good Luck.
http://forum.xda-developers.com/showthread.php?t=1307637
I just plugged my usb into the back and i got past it. sat for the last 2 hours troubleshooting.....
So what if Odin doesnt work? what do you do to get your phone back operational? Ive tried 4 different md5 and tar files, the same pit file and still nothing. it fails either at recovey section or in the factoryrs section. is it time to get a new phone?
No, it's time to use a non-stock USB cable (try first, 85% of the time this is the problem) and/or a different USB port or PC.
ive tried 5 cables total. 3 didnt even register with pc something was plugged in. the other 2 work but they both share the same problem.
McBang2023 said:
ive tried 5 cables total. 3 didnt even register with pc something was plugged in. the other 2 work but they both share the same problem.
Click to expand...
Click to collapse
Sounds like most of them are bad - try a known-good one. Definitely try other USB ports, and then another PC. Also, drivers - reinstall them.
Is your phone sponged (stuck at Samsung) or just need to get back to stock?
Do you BONSAI?
kennyglass123 said:
Is your phone sponged (stuck at Samsung) or just need to get back to stock?
Do you BONSAI?
Click to expand...
Click to collapse
its shows the samsung logo and that is all. when trying to get into the recovery, it shows a phone - exlamation mark - and a computer. i figure Odin is the only thig i can do to respolve this at this point.
McBang2023 said:
its shows the samsung logo and that is all. when trying to get into the recovery, it shows a phone - exlamation mark - and a computer. i figure Odin is the only thig i can do to respolve this at this point.
Click to expand...
Click to collapse
In the dev section somone recently posted a computerless approach that will likely set you straight
Sent from my SPH-D700 using XDA App
Djinn23 said:
In the dev section somone recently posted a computerless approach that will likely set you straight
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
how can there be a computerless version if i cant get to recovery to install anything, and the only thing the phone does is go to download mode?
McBang2023 said:
how can there be a computerless version if i cant get to recovery to install anything, and the only thing the phone does is go to download mode?
Click to expand...
Click to collapse
So it goes into download mode but Odin doesn't recognize it...and you tried 5 cables and 3 PCs and all of their ports. You have also tried connecting without a battery, connecting to computer with Odin up and boot into download mode. No COM port shows up in Odin and no driver install errors on the computer. Still sounds like a bad cable or bad port on the phone.
kennyglass123 said:
So it goes into download mode but Odin doesn't recognize it...and you tried 5 cables and 3 PCs and all of their ports. You have also tried connecting without a battery, connecting to computer with Odin up and boot into download mode. No COM port shows up in Odin and no driver install errors on the computer. Still sounds like a bad cable or bad port on the phone.
Click to expand...
Click to collapse
NO NO NO. i think you understood me wrong. It goes to download mode and Odin does recognize it. i've tried 5 cables, only 2 of the 5 cables work. ive tried it on 2 pc's (one xp and the other vista) and havetried all the ports on both computers. vista wont see it period. xp sees it but fails during the process. so to my knowledge, ive tried everything.
McBang2023 said:
NO NO NO. i think you understood me wrong. It goes to download mode and Odin does recognize it. i've tried 5 cables, only 2 of the 5 cables work. ive tried it on 2 pc's (one xp and the other vista) and havetried all the ports on both computers. vista wont see it period. xp sees it but fails during the process. so to my knowledge, ive tried everything.
Click to expand...
Click to collapse
So you got 1 set of everything that works but it fails in the process. Have you tried another tar? You are using a tar right, if it says md5 at the end, remove that extension. Only autoreboot checked at top, got the tar in the PDA box and the pit in the PIT box?
kennyglass123 said:
So you got 1 set of everything that works but it fails in the process. Have you tried another tar? You are using a tar right, if it says md5 at the end, remove that extension. Only autoreboot checked at top, got the tar in the PDA box and the pit in the PIT box?
Click to expand...
Click to collapse
I didnt think to remove the md5 at the end. could be the problem. ironically, Odin recognizes the file and does a check for it. (im using odin3 v 1.0 and v 1.7). but it halts at the recovery screen. i shall try again tonight without the md5 as that seems to be the only thing i didnt do. everything else you mention has been set. ive tried 3 diff files. one for eco3, one for stock, and another for eb13 (i think). and none of them work.
McBang2023 said:
how can there be a computerless version if i cant get to recovery to install anything, and the only thing the phone does is go to download mode?
Click to expand...
Click to collapse
On my phone or I would dig up the link but they do a good job of explaining how in the thread that...well...tells you how to do it.
Edit... sorry I see you failed mid odin. This happens to me so frequently I don't even know what to say. I would keep trying. I think eventually I would try different files in different odin sections...different odins...all sorts of crap. Persistance was the key
Sent from my SPH-D700 using XDA App
Fixed!!!!!
Finally, i found a thred that helped me. in fact, it seems to help every one. Look HERE for the one that finally worked.
Thanks for all the help and suggestions guys.
McBang2023 said:
Finally, i found a thred that helped me. in fact, it seems to help every one. Look HERE for the one that finally worked.
Thanks for all the help and suggestions guys.
Click to expand...
Click to collapse
So what was the thing that got you going?
Turned out to be a bad pit file
Sent from my sizzling, crackling, on fire, Samsung Galaxy "Vibrant" using the XDA APP. (NOTE: Due to modding, some side effects may occur. Happy Flashing!)
McBang2023 said:
Turned out to be a bad pit file
Click to expand...
Click to collapse
The PIT that doesn't have "victory" in it doesn't work. That's why I host Odin 1.61, the proper PIT, and the EC05 TAR.
k0nane said:
The PIT that doesn't have "victory" in it doesn't work. That's why I host Odin 1.61, the proper PIT, and the EC05 TAR.
Click to expand...
Click to collapse
Links please? Then I can bookmark it and pass it on to those that need it. Thanks K.
Link is in my post
Sent from my sizzling, crackling, on fire, Samsung Galaxy "Vibrant" using the XDA APP. (NOTE: Due to modding, some side effects may occur. Happy Flashing!)
kennyglass123 said:
Links please? Then I can bookmark it and pass it on to those that need it. Thanks K.
Click to expand...
Click to collapse
http://tinyurl.com/epicfix They're linked here. Not my guide, but my files.
I tried installing Cyanogen Mod but it didn't work, I just got stuck at the boot screen and when I tired to flash back to stock something really went wrong.
Now all I see is an error saying "Firmware upgrade encountered an issue. Pleas select recovery mode in Kies & try again."
But I can still access download mode so from what I can tell I can fix this with the right files and right settings in Odin3.
I have the Sprint Galaxy S4 SPH-L720. I am currently running Odin3 v3.07.
I was trying to flash this in Odin3, qbking77.com/development/how-to-unroot-and-unbrick-the-samsung-galaxy-s4. I got as far as system.img.ext4 before it failed.
Any help would be greatly appreciated. I am still somewhat new to hacking my phone but an very tech savvy and feel comfortable following any directions you have for what to flash with odin3 and what options to use.
Thanks in advance.
Ryan990 said:
I tried installing Cyanogen Mod but it didn't work, I just got stuck at the boot screen and when I tired to flash back to stock something really went wrong.
Now all I see is an error saying "Firmware upgrade encountered an issue. Pleas select recovery mode in Kies & try again."
But I can still access download mode so from what I can tell I can fix this with the right files and right settings in Odin3.
I have the Sprint Galaxy S4 SPH-L720. I am currently running Odin3 v3.07.
I was trying to flash this in Odin3, qbking77.com/development/how-to-unroot-and-unbrick-the-samsung-galaxy-s4. I got as far as system.img.ext4 before it failed.
Any help would be greatly appreciated. I am still somewhat new to hacking my phone but an very tech savvy and feel comfortable following any directions you have for what to flash with odin3 and what options to use.
Thanks in advance.
Click to expand...
Click to collapse
Try these links from this post buddy
http://forum.xda-developers.com/showthread.php?p=46273175
The #1 misfit
of my crew of misfits
Ryan990 said:
I tried installing Cyanogen Mod but it didn't work, I just got stuck at the boot screen and when I tired to flash back to stock something really went wrong.
Now all I see is an error saying "Firmware upgrade encountered an issue. Pleas select recovery mode in Kies & try again."
But I can still access download mode so from what I can tell I can fix this with the right files and right settings in Odin3.
I have the Sprint Galaxy S4 SPH-L720. I am currently running Odin3 v3.07.
I was trying to flash this in Odin3, qbking77.com/development/how-to-unroot-and-unbrick-the-samsung-galaxy-s4. I got as far as system.img.ext4 before it failed.
Any help would be greatly appreciated. I am still somewhat new to hacking my phone but an very tech savvy and feel comfortable following any directions you have for what to flash with odin3 and what options to use.
Thanks in advance.
Click to expand...
Click to collapse
Been there (that screen is still odin mode). Should be recoverable through odin still. In my case, the problem was that I had a bad tar file. I'd start there, make sure you have the right file for your phone. If you have the right file, it may be a bad download. So I would try to re-download, or naybe try a different version.
Cheers.
Sent from my SGH-M919 using xda app-developers app
Oscar_david said:
Been there (that screen is still odin mode). Should be recoverable through odin still. In my case, the problem was that I had a bad tar file. I'd start there, make sure you have the right file for your phone. If you have the right file, it may be a bad download. So I would try to re-download, or naybe try a different version.
Cheers.
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
I had used the exact file before so I know its correct and uncorrupted. I did figure it out.
Successfully flashed using another computer. Best I can figure, following the CM installation instructions have a step "Run the included zadig.exe in the drivers folder of the Heimdall Suite."
That does something with drivers that odin must not like. I tried uninstalling, restarting my computer than reinstalling the Samsung drivers but that was not enough. A new computer was the answer.
Ryan990 said:
I had used the exact file before so I know its correct and uncorrupted. I did figure it out.
Successfully flashed using another computer. Best I can figure, following the CM installation instructions have a step "Run the included zadig.exe in the drivers folder of the Heimdall Suite."
That does something with drivers that odin must not like. I tried uninstalling, restarting my computer than reinstalling the Samsung drivers but that was not enough. A new computer was the answer.
Click to expand...
Click to collapse
Wow what one file can do to mess everything up and glad you got it working again buddy
The #1 misfit
of my crew of misfits
Bigger question here is:
Why are some phones experiencing corrupt partitions after flashing AOSP-based ROMs? Myself included....
Searched but and found similar posts but with different phones or different firmware, so the file references were of no help.
Basically I had safestrap working, had flashed google play edition ROM and it was working great with the exception of the play store not wanting to connect. I was in the process of messing with that and read (here) that I needed 4.3 edition of that app, I checked and I had 4.2, so I loaded 4.3 to the Sdcard and installed it..
Phone rebooted and just stays on the samsung custom splash screen indefinitely . I can get to ODIN on the phone, soI tried using https://builds.casual-dev.com/jodin3/ to get access and see what I could do, but it keeps telling me to unplug and plug in the phone, and gives an error that it cant mount the device.
So, im kinda stuck, I didn't use ODIN to do anything previously, But considering its the only thing I currently have access to, I guess its my only hope.
Been fighting this a few hours and getting pretty dejected, I had almost everything PERFECT.. and now back to WORSE than where I started.
Wingnutt said:
Searched but and found similar posts but with different phones or different firmware, so the file references were of no help.
Basically I had safestrap working, had flashed google play edition ROM and it was working great with the exception of the play store not wanting to connect. I was in the process of messing with that and read (here) that I needed 4.3 edition of that app, I checked and I had 4.2, so I loaded 4.3 to the Sdcard and installed it..
Phone rebooted and just stays on the samsung custom splash screen indefinitely . I can get to ODIN on the phone, soI tried using https://builds.casual-dev.com/jodin3/ to get access and see what I could do, but it keeps telling me to unplug and plug in the phone, and gives an error that it cant mount the device.
So, im kinda stuck, I didn't use ODIN to do anything previously, But considering its the only thing I currently have access to, I guess its my only hope.
Been fighting this a few hours and getting pretty dejected, I had almost everything PERFECT.. and now back to WORSE than where I started.
Click to expand...
Click to collapse
The 4.3 edition of SS doesn't work on 4.2. Does it stay on the splash or does it go to the actual boot animation? Also, you don't need to boot into the phone to use odin, it's a PC program. You can google "mf3 tar files" and you'll find the thread with the ODIN files, use them to get back to stock.
DeadlySin9 said:
The 4.3 edition of SS doesn't work on 4.2. Does it stay on the splash or does it go to the actual boot animation? Also, you don't need to boot into the phone to use odin, it's a PC program. You can google "mf3 tar files" and you'll find the thread with the ODIN files, use them to get back to stock.
Click to expand...
Click to collapse
It sits on the Samsung custom screen, that's it.
And how do I use the ODIN files.. When the ODIN program won't do anything except tell me over and over to in plug and plug in the phone?
How do I "use the Odin files" ??
Wingnutt said:
It sits on the Samsung custom screen, that's it.
And how do I use the ODIN files.. When the ODIN program won't do anything except tell me over and over to in plug and plug in the phone?
How do I "use the Odin files" ??
Click to expand...
Click to collapse
Did you install the Samsung USB Drivers? Google that and install them, then plug in the phone and run the program.
DeadlySin9 said:
Did you install the Samsung USB Drivers? Google that and install them, then plug in the phone and run the program.
Click to expand...
Click to collapse
I *think* I already have installed them but I'll double check just in case, I have android file transfer installed, it does the same, I'll try it under windows in instead of Mac as well.
Ok, ODIN sees the phone, under windows, Downloading a MF3 TAR file as seen here http://forum.xda-developers.com/showthread.php?t=2504311
(1.5gb?!) once thats done Ill see what we have![/QUOTE]
Well, im a little stuck
I downloaded a the MF3 TAR file from here:http://forum.xda-developers.com/show....php?t=2504311
Flashed the bootloader: BOOTLOADER_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.mp5
That went through properly, the phone rebooted..
No change..
what am i supposed to do next?
I flashed the CSC file: CSC_ATT_I337ATTAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5
That went through as well, after reboot no change.
Tried flashing the phone file: PLATFORM_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5
but nothing happens, no error message... it just doesent do anything :silly:
a little help?
Wingnutt said:
Well, im a little stuck
I downloaded a the MF3 TAR file from here:http://forum.xda-developers.com/show....php?t=2504311
Flashed the bootloader: BOOTLOADER_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.mp5
That went through properly, the phone rebooted..
No change..
what am i supposed to do next?
I flashed the CSC file: CSC_ATT_I337ATTAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5
That went through as well, after reboot no change.
Tried flashing the phone file: PLATFORM_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5
but nothing happens, no error message... it just doesent do anything :silly:
a little help?
Click to expand...
Click to collapse
You put platform tar in the PDA slot right? Also, you might have to restart between flashes or just load them in all at once.
There's a picture on this post with what options you should have: http://forum.xda-developers.com/showpost.php?p=46955352&postcount=7
DeadlySin9 said:
You put platform tar in the PDA slot right? Also, you might have to restart between flashes or just load them in all at once.
There's a picture on this post with what options you should have: http://forum.xda-developers.com/showpost.php?p=46955352&postcount=7
Click to expand...
Click to collapse
Yep, ive read that thread stem to stern, everything is in the correct slots, I can flash everything EXCEPT the platform file
have tried it by itself, and as added with the rest, either way it same result.
Wingnutt said:
Yep, ive read that thread stem to stern, everything is in the correct slots, I can flash everything EXCEPT the platform file
have tried it by itself, and as added with the rest, either way it same result.
Click to expand...
Click to collapse
Make sure the file you download was full and that it extracted the whole platform file. Other than that i'm not sure why it wouldn't work..
DeadlySin9 said:
Make sure the file you download was full and that it extracted the whole platform file. Other than that i'm not sure why it wouldn't work..
Click to expand...
Click to collapse
Ive downloaded it twice, Ive tried flashing it under windows 7 and OSX. Same result.
I would be happy to try a different platform file, but I cant find any others.
One oddity, the ONLY Odin program that can see the phone is Jodin3, the web based version.
Ive downloaded 1.85 and 3.07 (windows) have updated the samsung USB drivers, have updated the heimdall software... they cant see it.
Wingnutt said:
Ive downloaded it twice, Ive tried flashing it under windows 7 and OSX. Same result.
I would be happy to try a different platform file, but I cant find any others.
One oddity, the ONLY Odin program that can see the phone is Jodin3, the web based version.
Ive downloaded 1.85 and 3.07 (windows) have updated the samsung USB drivers, have updated the heimdall software... they cant see it.
Click to expand...
Click to collapse
Seems like it's not installing the drivers right. I'd try installing again: http://forum.xda-developers.com/showthread.php?t=2038555 or just manually go into device manager and point it to where you installed the drivers. Also, you might have to wait a while on any version of ODIN (even the we version) for it to finish checking the file.
OHHHH ****!
You were right, it was the USB drivers, I had to do it via method 3, I.E. manually select them.. for some odd reason the installer DID install the drivers but the device showed up as someting totally different than when doing it manually.
flashing now... will see what happens:laugh:
ITS ALLLLIIIVVVEEEE!!!!!!!
Ok. so, now I cant start over lol!
Thanks for all your help, everyone!!
I had no problem using QBKing77's guide to root my S3. I looked for the comparable thread when I got my S4.
I loaded up Odin but got an error saying there was no PIT partition. I put the phone into debug mode (not in the instructions?) and it seemed to work.
But then it failed half-way through. I was plugged into a USB port on the front of the computer.
Now I get the error "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
I searched and found other threads for the S3 and other phones but would appreciate some help with the S4. Thanks.
Edit: are these the steps I need to take?
Edit #2: Uh, I guess those steps won't work since they will prompt me for a serial number and there doesn't seem to be a way to get that from a Galaxy S4 if it won't boot.
Help?
Does the phone boot into download mode? Have you tried flashing the stock firmware through ODIN?
nxtech3 said:
Does the phone boot into download mode? Have you tried flashing the stock firmware through ODIN?
Click to expand...
Click to collapse
When it boots, it goes straight to the error. If I hold volume down + Home, it *will* go into download mode.
I didn't know what to flash with ODIN.
After the fiasco with the attempted rooting, I didn't want to chance flashing the wrong thing.
Thanks for the reply.
Edit: Can someone post step-by-step directions on how to flash stock firmware through Odin? (Or the link to the thread that probably already exists)
Preferably with a link to the exact ROM/firmware that I need?
Dougmeister said:
When it boots, it goes straight to the error. If I hold volume down + Home, it *will* go into download mode.
I didn't know what to flash with ODIN.
After the fiasco with the attempted rooting, I didn't want to chance flashing the wrong thing.
Thanks for the reply.
Edit: Can someone post step-by-step directions on how to flash stock firmware through Odin? (Or the link to the thread that probably already exists)
Preferably with a link to the exact ROM/firmware that I need?
Click to expand...
Click to collapse
Look for CF-Auto-Root for jfltespr. That will get you rooted but will trip your Knox counter.
garwynn said:
Look for CF-Auto-Root for jfltespr. That will get you rooted but will trip your Knox counter.
Click to expand...
Click to collapse
I have this file already downloaded: CF-Auto-Root-jfltespr-jfltespr-sphl720
I started Odin 3.07 ("Run as administrator") and loaded the file in the PDA slot. I waited for "<OSM> Leave CS.." to appear in the "Message" box. I hooked up the Galaxy S4 but the COM port will not show up... trying different cables now... (it is plugged into the back of the computer...)
Dougmeister said:
I have this file already downloaded: CF-Auto-Root-jfltespr-jfltespr-sphl720
I guess that's it?
Click to expand...
Click to collapse
That's it. Make sure it's the current one and flash in PDA slot using Odin.
Will reboot, apply root, reboot back to stock and voila!
garwynn said:
That's it. Make sure it's the current one and flash in PDA slot using Odin.
Will reboot, apply root, reboot back to stock and voila!
Click to expand...
Click to collapse
I can't get ODIN to recognize the S4 via the USB slot ("ID:COM" port stays blank). I even re-installed the S4 drivers. Any ideas?
I've tried 3 different cables, all plugged into the back.
Dougmeister said:
I can't get ODIN to recognize the S4 via the USB slot ("ID:COM" port stays blank). I even re-installed the S4 drivers. Any ideas?
I've tried 3 different cables, all plugged into the back.
Click to expand...
Click to collapse
Not to sound silly but did you reboot into download mode?
garwynn said:
Not to sound silly but did you reboot into download mode?
Click to expand...
Click to collapse
Not a silly question at all. I've been known to do that
But no, this time I was in "download mode". For some reason, it finally worked with one of the cables using a front USB port. (?)
Thanks for everyone's help. Crisis averted.
Dougmeister said:
Not a silly question at all. I've been known to do that
But no, this time I was in "download mode". For some reason, it finally worked with one of the cables using a front USB port. (?)
Thanks for everyone's help. Crisis averted.
Click to expand...
Click to collapse
I've had dicey situations using download mode just like you've described on 2 different gs4's. I use heimdall, not odin, but same flakey results. The gs4's download mode appears to be very finicky about the quality of the usb cable and port. I never had any issue with download mode with identical hardware when I used to flash my gs2. So it's not you, it's the gs4. I finally got some reasonably reliable and consistent flashing results by using the usb ports on the back, and a high quality blackberry usb cable. In my case, the "bad" ports on the front are usb1.1, while the ports on the back are usb 2.0. So it seems to matter when flashing the gs4. So I would say avoid using usb 1.1 ports if your computer is old enough to have them.