Database Users

[Q] [I9500] Have generic IMEI and not able to connect to network

Hi,
I had installed the CyanogenMod 10.2 available in the original android development section on my I9500. I flashed it in the morning. everything was working fine except camera till afternoon. Suddenly on afternoon i observe that my phone has entered into emergency signals mode and was not connected to my mobile network. First i thought it was signal problem but upon reading found out that it is IMEI getting changed problem. I have installed Stock ROM again to try if it solves the problem but sadly it doesnt .
Anyone out there faced the same issue and can help me?
Thanks

parvezthepop said:
Hi,
I had installed the CyanogenMod 10.2 available in the original android development section on my I9500. I flashed it in the morning. everything was working fine except camera till afternoon. Suddenly on afternoon i observe that my phone has entered into emergency signals mode and was not connected to my mobile network. First i thought it was signal problem but upon reading found out that it is IMEI getting changed problem. I have installed Stock ROM again to try if it solves the problem but sadly it doesnt .
Anyone out there faced the same issue and can help me?
Thanks
Click to expand...
Click to collapse
What is the firmware you are using before flashing cm rom?
Sent from my GT-I9500 using xda app-developers app

parvezthepop said:
Hi,
I had installed the CyanogenMod 10.2 available in the original android development section on my I9500. I flashed it in the morning. everything was working fine except camera till afternoon. Suddenly on afternoon i observe that my phone has entered into emergency signals mode and was not connected to my mobile network. First i thought it was signal problem but upon reading found out that it is IMEI getting changed problem. I have installed Stock ROM again to try if it solves the problem but sadly it doesnt .
Anyone out there faced the same issue and can help me?
Thanks
Click to expand...
Click to collapse
Hi,
Have you tried flashing a previous modem?
List is HERE
Choose the correct version for your phone.

malybru said:
Hi,
Have you tried flashing a previous modem?
List is HERE
Choose the correct version for your phone.
Click to expand...
Click to collapse
I have an Indian model I9500 . I tried flashing Omega Rom before trying CM. For Omega ROM i flashed XXUBMG9. After that i flashed back the Stock firmware I9500XXUAMDE_I9500ODDAMDC_INU. Then i flashed CM. CM worked fine for half a day. Then it failed connecting to my network.
With the method you are telling i flashed my stock firmware modem first, but it didnt work. Now i flashed XXUBMG9 and it worked.
Can't i go back to my stock firmware modem now? Am I stuck with this modem ?

same
parvezthepop said:
I have an Indian model I9500 . I tried flashing Omega Rom before trying CM. For Omega ROM i flashed XXUBMG9. After that i flashed back the Stock firmware I9500XXUAMDE_I9500ODDAMDC_INU. Then i flashed CM. CM worked fine for half a day. Then it failed connecting to my network.
With the method you are telling i flashed my stock firmware modem first, but it didnt work. Now i flashed XXUBMG9 and it worked.
Can't i go back to my stock firmware modem now? Am I stuck with this modem ?
Click to expand...
Click to collapse
same here I am also having same problem phone works fine on xxubmg9 modem but not on stock modem as it gives generic imei,
is there any way to revert back to stock rom completely?

naanireddy said:
same here I am also having same problem phone works fine on xxubmg9 modem but not on stock modem as it gives generic imei,
is there any way to revert back to stock rom completely?
Click to expand...
Click to collapse
parvezthepop said:
I have an Indian model I9500 . I tried flashing Omega Rom before trying CM. For Omega ROM i flashed XXUBMG9. After that i flashed back the Stock firmware I9500XXUAMDE_I9500ODDAMDC_INU. Then i flashed CM. CM worked fine for half a day. Then it failed connecting to my network.
With the method you are telling i flashed my stock firmware modem first, but it didnt work. Now i flashed XXUBMG9 and it worked.
Can't i go back to my stock firmware modem now? Am I stuck with this modem ?
Click to expand...
Click to collapse
you still on the first old firmware for India (MDE).
you can take ota update and then the modem will be replaced. or flash latest Indian firmware (MG5) and you will be on full stock.
PS. i guess that modem does not affect warranty.

state
samersh72 said:
you still on the first old firmware for India (MDE).
you can take ota update and then the modem will be replaced. or flash latest Indian firmware (MG5) and you will be on full stock.
PS. i guess that modem does not affect warranty.
Click to expand...
Click to collapse
thanks for the suggestion but I am doing the same I hope...I am trying to flash I9500XWUBMG5_I9500ODDBMG5_I9500DDUBMF8_HOME.tar firmware but I am getting generic imei when I do this then I have to flash xxubmg9 modem to get my imei and I don't have any back up of efs folder.

naanireddy said:
thanks for the suggestion but I am doing the same I hope...I am trying to flash I9500XWUBMG5_I9500ODDBMG5_I9500DDUBMF8_HOME.tar firmware but I am getting generic imei when I do this then I have to flash xxubmg9 modem to get my imei and I don't have any back up of efs folder.
Click to expand...
Click to collapse
flash old indian firmware, and see if it can take ota update.
or flash MF8 modem alone twice on MG5 firmware and see if it will work

flash old firmware
samersh72 said:
flash old indian firmware, and see if it can take ota update.
or flash MF8 modem alone twice on MG5 firmware and see if it will work
Click to expand...
Click to collapse
I tried by flashing I9500XXUBMEA_I9500ODDBMEA_INS and I got same generic imei and I count get connected to server to get OTA update as it say connection failed and I have same problem is there any older firmware available other than that.

naanireddy said:
I tried by flashing I9500XXUBMEA_I9500ODDBMEA_INS and I got same generic imei and I count get connected to server to get OTA update as it say connection failed and I have same problem is there any older firmware available other than that.
Click to expand...
Click to collapse
MEA firmware came with DDUBMEA modem. try to flash this modem alone as "phone" twice http://d-h.st/c9i
any way these are all INS firmwares http://www.sammobile.com/firmwares/1/?model=GT-I9500&pcode=INS#firmware

I tried flashing MEA modem twice all other Indian Modems twice and nothing worked. It is only working on XXUBMG9 modem. I am really stuck on this modem.
Does anyone has a theory of why this is happening? Omega ROMv14 wanted flashing this modem as a prerequisite. I had flashed this modem before flashing Omega. Then i went back to my stock and flashed CM over my stock ROM. CM wasworking fine till sometime , then it started to drop the signals and later i realized i lost my imei. If i flash back the MG9 modem the i get the proper my phones imei and network connects. But for all other modem of india it just shows the generic imei and doesnt connect to network.
Can anyone help me postmortem this case and tell what went wrong where?

all failed
samersh72 said:
MEA firmware came with DDUBMEA modem. try to flash this modem alone as "phone" twice http://d-h.st/c9i
any way these are all INS firmwares http://www.sammobile.com/firmwares/1/?model=GT-I9500&pcode=INS#firmware
Click to expand...
Click to collapse
two modems failed samaresh I think probably only mg9 modems and higher only might work.
wat if I flash stock ware and again flash it with stock ware, while doing that I shall interrupt the flashing and take it to service center then is there any possibility of them recovering my imei in stock ware

Solution for soft-bricked N9005 after flashing Hong Kong's TGY firmware

I am posting this to help people who ran across the same problem I did the past 24 hours, which drove me crazy and it was quite difficult to find any info on it.
I bought my N9005 on eBay from a Hong Kong seller. I just updated it with Kies and noticed that sammobile.com has a newer MJ8 firmware, so I figured I'd just download it and flash it via Odin.
Kies shows my mobile as XME (Malaysia region), but I guessed it should work just fine, and boy was I wrong.
Moments after trying to flash it, it failed, but it did manage to flash the beginning of the firmware, which was the new MJ bootloader. That newer bootloader does not allow any other firmware with older bootloader be flashed on the phone. Not even Kies's emergency recovery was able to revive my phone which was stuck in emergency download mode.
When trying to flash I got all sorts of errors, such as:
invalid ext4 image
and
CHECK FAIL : fused : 2 , Binary : 1. (when trying to install the older XME Malaysian Firmware on top of the new bootloader)
To make a very long story short, after almost giving up and start waiting for a Malaysian firmware with the new bootloader to be released, I ran across the UK MJ6 BTU rom which does have the new bootloader too and decided to try flashing it. To my amazement - this worked and my phone is back to life! phewwwww!
This is a download link to the BTU MJ6 firmware:
http://www.hotfile.com/dl/252753467/b379b8f/N9005XXUDMJ6_N9005OXADMJ4_BTU.zip.html
Hope this helps others!
P.S. If this information helped you, please click the "THANKS" button below. It's free of charge.

doclucas said:
I am posting this to help people who ran across the same problem I did the past 24 hours, which drove me crazy and it was quite difficult to find any info on it.
I bought my N9005 on eBay from a Hong Kong seller. I just updated it with Kies and noticed that sammobile.com has a newer MJ8 firmware, so I figured I'd just download it and flash it via Odin.
Kies shows my mobile as XME (Malaysia region), but I guessed it should work just fine, and boy was I wrong.
Moments after trying to flash it, it failed, but it did manage to flash the beginning of the firmware, which was the new MJ bootloader. That newer bootloader does not allow any other firmware with older bootloader be flashed on the phone. Not even Kies's emergency recovery was able to revive my phone which was stuck in emergency download mode.
When trying to flash I got all sorts of errors, such as:
invalid ext4 image
and
CHECK FAIL : fused : 2 , Binary : 1. (when trying to install the older XME Malaysian Firmware on top of the new bootloader)
To make a very long story short, after almost giving up and start waiting for a Malaysian firmware with the new bootloader to be released, I ran across the UK MJ6 BTU rom which does have the new bootloader too and decided to try flashing it. To my amazement - this worked and my phone is back to life! phewwwww!
This is a download link to the BTU MJ6 firmware:
http://www.hotfile.com/dl/252753467/b379b8f/N9005XXUDMJ6_N9005OXADMJ4_BTU.zip.html
Hope this helps others!
P.S. If this information helped you, please click the "THANKS" button below. It's free of charge.
Click to expand...
Click to collapse
Thanks buddy for helping me, got me up and running again :good:

You're welcome, mate!

Softbrick
Thank you thank you thank you thank you .
I always liked Hong Kong roms on note one and two and I thought I can continue the tradition .
Softbricked it , and no solution anywhere . I installed this and voila . Back in business . I also installed MJ7 on top now all is good .
Have I said thank you ?
Well thank you !

budalica said:
Thank you thank you thank you thank you .
Have I said thank you ?
Well thank you !
Click to expand...
Click to collapse
You're welcome. Did you press the "Thank you" button?

Thanks a lot. Without your post, my phone will still be bricked.

hh
That day! ! Me too

Useful info, I'm sure this will be of use in many situations.
Thankyou.
Sent from my GT-I9100 using Tapatalk 4

uscool said:
Thanks buddy for helping me, got me up and running again :good:
Click to expand...
Click to collapse
could someone please upload that firmware again on some other hoster? because hostfile isnt working anymore. couldnt find the file on any other server by myself.

lalahamid said:
could someone please upload that firmware again on some other hoster? because hostfile isnt working anymore. couldnt find the file on any other server by myself.
Click to expand...
Click to collapse
Here is the newer version from UK BTU: N9005XXUDMJ7_N9005OXADMJ4_BTU.zip
http://terafile.co/29f621508415

doclucas said:
I am posting this to help people who ran across the same problem I did the past 24 hours, which drove me crazy and it was quite difficult to find any info on it.
I bought my N9005 on eBay from a Hong Kong seller. I just updated it with Kies and noticed that sammobile.com has a newer MJ8 firmware, so I figured I'd just download it and flash it via Odin.
Kies shows my mobile as XME (Malaysia region), but I guessed it should work just fine, and boy was I wrong.
Moments after trying to flash it, it failed, but it did manage to flash the beginning of the firmware, which was the new MJ bootloader. That newer bootloader does not allow any other firmware with older bootloader be flashed on the phone. Not even Kies's emergency recovery was able to revive my phone which was stuck in emergency download mode.
When trying to flash I got all sorts of errors, such as:
invalid ext4 image
and
CHECK FAIL : fused : 2 , Binary : 1. (when trying to install the older XME Malaysian Firmware on top of the new bootloader)
To make a very long story short, after almost giving up and start waiting for a Malaysian firmware with the new bootloader to be released, I ran across the UK MJ6 BTU rom which does have the new bootloader too and decided to try flashing it. To my amazement - this worked and my phone is back to life! phewwwww!
This is a download link to the BTU MJ6 firmware:
http://www.hotfile.com/dl/252753467/b379b8f/N9005XXUDMJ6_N9005OXADMJ4_BTU.zip.html
Hope this helps others!
P.S. If this information helped you, please click the "THANKS" button below. It's free of charge.
Click to expand...
Click to collapse
my brick story in short is------ brought note 3 sm-n9005 from ebay from a Hong Kong based seller. pics of ap, cp and csc are attached. rooted with chainfire's and installed cwm6 by chenglu. A few days back, flashed bobcat rom version 2(mj7) and later 3( mk2 ) without problems. Was looking for different themes .yesterday flashed balckchrome from s4 forum that also went smooth. Unfortunatly flashed another theme for s4 which was not meant for andriod version 4.3. Pretty stupid .went into bootloop. Had nandroid backup tried to restore but couldn't.
Flashed another rom mk2 from cwm. again bootloop .took the odin route and flashed stock deodesk mj7 by Djembey from this thread.
http://forum.xda-developers.com/show....php?t=2461929
Failed again. Then downloaded latest mk2 from sammobile website. The same error (invalid ext4 img) in short failed on all ccounts. Have run out of options. The last thing in mind is to wait for some new bootloader after mk2 which might rescue me as mentioned in this thread that new bootloaders might help... Any guidance will be appreciated. Thanks

@pyarajaani
Try this:
1) Get X-Note v6 custom rom.
2) Use Odin to install CWM recovery.
3) boot the phone into CWM recovery and copy the X-NOTE rom (MK2 based) to your phone or card.
4) Do a complete wipe/factory-reset from CWM
5) Install the X-NOTE rom from CWM
And let me know how it went

doclucas said:
@pyarajaani
Try this:
1) Get X-Note v6 custom rom.
2) Use Odin to install CWM recovery.
3) boot the phone into CWM recovery and copy the X-NOTE rom (MK2 based) to your phone or card.
4) Do a complete wipe/factory-reset from CWM
5) Install the X-NOTE rom from CWM
And let me know how it went
Click to expand...
Click to collapse
Why did you suggest X-Note but not another ROM?

3 reasons:
- It's MK2 based
- I am using it
- It's excellent
And besides, if the method I suggested works, he can always replace a ROM later on if he wishes.

doclucas said:
3 reasons:
- It's MK2 based
- I am using it
- It's excellent
And besides, if the method I suggested works, he can always
replace a ROM later on if he wishes.
Click to expand...
Click to collapse
Thanks for the suggestion. ..tried twice with both stock n Civato kernels.. didn't go beyond Samsung logo screen....With Civato there appears some error above the logo...pics i m attaching. .Thanks again.

doclucas said:
3 reasons:
- It's MK2 based
- I am using it
- It's excellent
And besides, if the method I suggested works, he can always replace a ROM later on if he wishes.
Click to expand...
Click to collapse
Nope, I didnt mean what is the best rom to use.
The problem is that how to bypass the bootloop issue.

pyarajaani said:
Thanks for the suggestion. ..tried twice with both stock n Civato kernels.. didn't go beyond Samsung logo screen....With Civato there appears some error above the logo...pics i m attaching. .Thanks again.
Click to expand...
Click to collapse
No need to mess with kernels.
Were u able to install cwm via odin and then boot into cwm?

doclucas said:
No need to mess with kernels.
Were u able to install cwm via odin and then boot into cwm?
Click to expand...
Click to collapse
yes...I did that n installed X note rom from cwm. BUT I suspect that cwm is not fully functional. Why I m saying this is that I have a nandroid backup of bobcat mj7 rom...which cwm isn't able to detect even. ..nevertheless. .cwm is installed.

1) Which CWM version do you have installed?
2) Did you do a full wipe/factory-reset?
3) Did you try also advanced formatting (of system partition together with the full wipe) and then install the ROM?
4) Did you try all the above with the latest TWRP recovery instead of CWM?
http://forum.xda-developers.com/showthread.php?t=2467255

Try to flash this file by cwm first and then flash any rom after you want
https://www.dropbox.com/s/bibytggk2m8npw8/Brick_Loop_FIX_Fix.zip
Sent from my SM-N9005 using Tapatalk

32g sm-n9005 baseband unknown/imei null/sound and camera not working

After flashing the sm-n9005 to N9005DXUENE4 the phone is not function at all. Though I can still boot into the system it becomes very laggy, baseband unknown, imei null sound and camera not working. Did try to flash Sweetrom V7 still the same. Anyway if there's a way I can bring it back to life?

Try to flash back stock rom..or restore thru kies 3 will be much better..
Sent from my GT-S7500 using XDA Free mobile app

Did try the stock rom already, still the same.

at217 said:
Did try the stock rom already, still the same.
Click to expand...
Click to collapse
IMEI NULL/NULL is modem or hardware problem
My guess is that it is due to a modem/firmware mismatch. Start flashing a modem for same fw version.

did that already, one more thing the phone keyboard and the swipe to unlock is not responsive at all.repair.

did you find any solution and fixed your phone ?

ohayyam said:
did you find any solution and fixed your phone ?
Click to expand...
Click to collapse
that's a modem problem
flash ir with odin

rayman95 said:
that's a modem problem
flash ir with odin
Click to expand...
Click to collapse
I tried different stock rom and different modem files for LTE but still same... what is correct combination to fix this problem.
my CSC EUR, it was XSI changed due to custom rom ???
I have 6 LTE modem from indie omega rom and fount on xda 2 more MJI6 and MI6 ... I tried all with FNF2 , latest and older xsi stock roms and some combination of rom and modem. but could not fixed yet.
i tried your rom too )
i tried mirek190 methods but could not find a mmsblk0P11 file or edit mine on phone to write imei ...
still nothing ...

ohayyam said:
I tried different stock rom and different modem files for LTE but still same... what is correct combination to fix this problem.
my CSC EUR, it was XSI changed due to custom rom ???
I have 6 LTE modem from indie omega rom and fount on xda 2 more MJI6 and MI6 ... I tried all with FNF2 , latest and older xsi stock roms and some combination of rom and modem. but could not fixed yet.
i tried your rom too )
i tried mirek190 methods but could not find a mmsblk0P11 file or edit mine on phone to write imei ...
still nothing ...
Click to expand...
Click to collapse
When arrive the problem and which rom and modem do you have before?
You need to go back on this... you Don t have efs backup?????
Otherwise try to put NF2 modem with NF4 rom. Bootloader is not important.
But check if modem well installed because odin says PASS but still on old modem

Try to flash latest NG2 firmware after whipe cache and factory reset. It did the job for me.

rayman95 said:
When arrive the problem and which rom and modem do you have before?
You need to go back on this... you Don t have efs backup?????
Otherwise try to put NF2 modem with NF4 rom. Bootloader is not important.
But check if modem well installed because odin says PASS but still on old modem
Click to expand...
Click to collapse
how can i check the modem with baseband unknown imei null phone ? Even phone info samsung application shows nothing !!!

try khizar method to flash NF2 or NG2 modem

Thank you
rayman95 said:
try khizar method to flash NF2 or NG2 modem
Click to expand...
Click to collapse
I have been already try KHIZAR'S METHOD*to install different LTE Modems on my phone with different stock roms. No matter finally i gave my phone to local repair shop. Samsung Official repair center's do not care about my phone due to it is N9005 and it is not for my country selling phone.
And another question my first N9005 slept in water during almost whole night. When i wake up in the morning i found my phone in water since many hours. I give it repair shop to check also but seems to main board needs to be replaced. Connection sockets damaged badly like melted half of them. is it possible to only change the connection sockets instead of whole mainboard ? Any idea ? and Where can i get only the connection sockets ? from samy ? ))
And i am starting the googled to find N9005 mainboard sockets

You re the terminator of N9005.? ....... no idea about motherboard or connector sorry....

I am having the same issue,
I'm new to the site been cool so far learned a lot and done a lot with my Note 3 since being here.
I recently rooted and install a custom rom (N900_NF3_INU_Dr.Ketan Custom ROM K11) that works great, I tried flashing back to stock but encountered a major problem. after flashing to stock my IMEI is unknown and also my base-band from reading it seem as if my EFS got corrupted tried a ton of different thing and still I cant get this to work on stock. Only way my IMEI and base-band comes back is whenever I reinstall the custom rom (N900_NF3_INU_Dr.Ketan Custom ROM K11) and restore the EFS that was backed up during the first installation of this rom
Thanks in advance all help is greatly appreciated. :good::good:

juniorbb2201 said:
I am having the same issue,
I'm new to the site been cool so far learned a lot and done a lot with my Note 3 since being here.
I recently rooted and install a custom rom (N900_NF3_INU_Dr.Ketan Custom ROM K11) that works great, I tried flashing back to stock but encountered a major problem. after flashing to stock my IMEI is unknown and also my base-band from reading it seem as if my EFS got corrupted tried a ton of different thing and still I cant get this to work on stock. Only way my IMEI and base-band comes back is whenever I reinstall the custom rom (N900_NF3_INU_Dr.Ketan Custom ROM K11) and restore the EFS that was backed up during the first installation of this rom
Thanks in advance all help is greatly appreciated. :good::good:
Click to expand...
Click to collapse
So you are lucky , you can use your phone with custom ROM. I tried many custom and stock and different modems ..Still imei null and unkown basband (
Hopefully Samsung will fix this .ucking useless problem with 4.4.3 ROM...
sign: N9005 Terminator )

ohayyam said:
I tried different stock rom and different modem files for LTE but still same... what is correct combination to fix this problem.
my CSC EUR, it was XSI changed due to custom rom ???
I have 6 LTE modem from indie omega rom and fount on xda 2 more MJI6 and MI6 ... I tried all with FNF2 , latest and older xsi stock roms and some combination of rom and modem. but could not fixed yet.
i tried your rom too )
i tried mirek190 methods but could not find a mmsblk0P11 file or edit mine on phone to write imei ...
still nothing ...
Click to expand...
Click to collapse
Here mmsblk0P11

worked for me
goodoane said:
Try to flash latest NG2 firmware after whipe cache and factory reset. It did the job for me.
Click to expand...
Click to collapse
You are a gent. My phone is alive and well again thanks to your advice. Much appreciated

UNCNOWN IMEI,
I ALSO HAVE BEFORE
AND I INSTAL
Phronesis N7 v7.0.zip
AND IMEI IS OK,
BUT I THINK MY NOTE3
PROBLEM HARDWARE,
IT WORK ONLY WHEN
NETWORK GSM,
AND IT NO WORK IF
LTE/3G/2G AUTO,
IT NOTIFY "NO REGISTERED
InUNCNOWN IMEI,
I ALSO HAVE BEFORE
AND I INSTAL
Phronesis N7 v7.0.zip
AND IMEI IS OK,
BUT I THINK MY NOTE3
PROBLEM HARDWARE,
IT WORK ONLY WHEN
NETWORK GSM,
AND IT NO WORK IF
LTE/3G/2G AUTO,
IT NOTIFY "NO REGISTERED
IN NETWORK"
*
I THINK MAYBE NEED UPDATE MODEM WITH Odin, I UPDATE
MODEM NORDIC,
IT NOT HELP,
I UPDATE ANOTHER, AGAIN AND AGAIN, EVEN
I UPDATE OFFICIAL FIRMWARE,
ONE FILE AND FOUR WITH PIT
AND NOTHING BETTER THAN
Phronesis N7 v7.0.
I TRY INSTAL
ANOTHER FEW VERSIONS OF Phronesis
BUT IT BRICKS
AND ONLY v7.0
NO BRICKS.

Difficult understand your post .
Suggest flashing latest stock rom for your model and test .Check IMEI correct . Back up EFS .

[q] help please note 3 no imei or baseband

hi basically i have a note 3 which was working fine i then done a factory reset in settigs and now it says baseband UNKNOWN and imei UNKOWN
ive read up on it and says i need to flash a stock rom via odin ?
im pretty new to this and i belive the rom i need is
EVR-N9005XXUGNG1-20141015154736.zip
as im in the uk ?
i cannot download it anywhere ive tried everywhere a link or some help would be very appricated
thanks very much

Just flash a xxuene1.zip modem from recovery or flash a stock rom with xxuene1 baseband.
it worked for me.

N910g unresponsive after flashing Dr.Ketan ROM I N5 Port seandroid error

Hello,
I tried flashing my n910g with "Dr.Ketan ROM I N5 Port I Full Theme store support I S6 Edge features L12" ROM.
After flashing, I also flashed the bootloader and modem mentioned by Dr.Ketan. The phone is stuck at the bootscreen with an error seandroid.
RECOVERY BOOTING Recovery is NOT SEANDROID ENFORCING Set Warrenty Bit. I used cwm recovery before flashing my ROM and my phone was already rooted with cf autoroot before flashing this rom.
I wanted to try this rom in my phone and I'm a noob. Can somebody please help me with this ? It'd be a great favor.
I'm a noob, please help me with the appropriate files/instructions so that I can start using my phone. As of now, my phone is still stuck at the boot screen with that error.

Download Stock firmware from sammobile for your phone and flash it with ODIN.

dork997 said:
Download Stock firmware from sammobile for your phone and flash it with ODIN.
Click to expand...
Click to collapse
Does it mean I would not be able to use the N5 port rom?

I see many people using this rom for N910G in India. I've shared much detailed info about my issue. Somebody please help.

Funny Sykes said:
I see many people using this rom for N910G in India. I've shared much detailed info about my issue. Somebody please help.
Click to expand...
Click to collapse
i have no idea about note 5 port as i have never used it.

dork997 said:
i have no idea about note 5 port as i have never used it.
Click to expand...
Click to collapse
Alright, now that my n910g is stuck with that I tried installing some nameless rom and the screen doesn't really work. I need to use Spen always even to click on the dial button.
Can you suggest any good rom for Note 4 N910g?
I really need to give my phone a fresh start as this will be my first time to flash my phone.
Please help!!

Listen, Dr. Ketan's note 5 port L12 with S6 edge features is based on android 5.1.1 Australian "COH4" baseband version. So first download and install that stock firmware having COH4 baseband version using odin. Here's the link for that: www.sammobile.com/firmwares/download/56424/N910GDTU1COH4_N910GXSA1COH4_XSA/
And after installing this, root your phone, then install CWM recovery and install dr. Ketan's L12 version rom which you have downloaded. Your phone will work fine after that.
Baseband version of your phone plays a very important role in determining which rom you can install on your phone. For example if u liked and downloaded a samsung stock modified custom rom that has baseband version say "PQR" and suppose if your phone has baseband version "XYZ" then you cannot install that rom on your phone. To install that rom you will first need to flash the stock rom of PQR baseband version in Odin. To check which baseband version your phone is running, go to (settings >> about phone/device >> baseband version). Look at the last 3 or 4 alphabets.

Shane_Picardo said:
Listen, Dr. Ketan's note 5 port L12 with S6 edge features is based on android 5.1.1 Australian "COH4" baseband version. So first download and install that stock firmware having COH4 baseband version using odin. Here's the link for that: www.sammobile.com/firmwares/download/56424/N910GDTU1COH4_N910GXSA1COH4_XSA/
And after installing this, root your phone, then install CWM recovery and install dr. Ketan's L12 version rom which you have downloaded. Your phone will work fine after that.
Baseband version of your phone plays a very important role in determining which rom you can install on your phone. For example if u liked and downloaded a samsung stock modified custom rom that has baseband version say "PQR" and suppose if your phone has baseband version "XYZ" then you cannot install that rom on your phone. To install that rom you will first need to flash the stock rom of PQR baseband version in Odin. To check which baseband version your phone is running, go to (settings >> about phone/device >> baseband version). Look at the last 3 or 4 alphabets.
Click to expand...
Click to collapse
Alright, downloading the stock firmware and then will try flashing it with the kd.Ketan's L12 rom. I hope it works.

Funny Sykes said:
Alright, downloading the stock firmware and then will try flashing it with the kd.Ketan's L12 rom. I hope it works.
Click to expand...
Click to collapse
downloaded the mentioned stock rom and then tried flashing the dr.ketan rom.
It always kept saying android media stopped working and when i click ok, again the same pop up and nothing works.
No icons are displayed but the edge+ feature was showing.
What is the best way to have this rom ?

Funny Sykes said:
Alright, downloading the stock firmware and then will try flashing it with the kd.Ketan's L12 rom. I hope it works.
Click to expand...
Click to collapse
Did you try my method? Did it work?

Used coh4 baseband which you said. But could not find the proper root file. Please help with the root and cwm files for 910g which work. Then i will try flashing dr.ketan rom

Yes I tried, now I am using the same baseband you have mentioned which is Australian, now the touch doesn't work well but with s pen it works fine. What to do ?>

Shane_Picardo said:
Did you try my method? Did it work?
Click to expand...
Click to collapse
"Shane_Picard"
Downloaded the stock from from sammobile and my phone was able to boot successfully. But the problem is that ever since, I tried flashing twrp recovery to flash dr.ketan rom which did not work. My phone's touch is really not working well. I have enabled touches in developer options and confirm that my s-pen works fine but when I touch the phone, it gets detected 1 cm below where I actually touch. This problem might have been created when I flashed twrp recovery because that was the first time I saw this issue.
Please help how to fix this ?