Hello everyone ... Can someone help me please... I have my s5 for a few days ... And now I saw that my proximity sensor Is always on, I can see the red light even if my phone is locked... And I'm worried that is using my battery I got 5 or 6 h display max with 1 day of usage
Proximity sensor doesn't utilize a red light. Maybe you have a malfunctioning notification light?
Notification light is on the left. Proximity and light sensors are on the right.
mediumsteak said:
Proximity sensor doesn't utilize a red light. Maybe you have a malfunctioning notification light?
Notification light is on the left. Proximity and light sensors are on the right.
Click to expand...
Click to collapse
It is on the right side... I barrely see it... But it s there and I know when is not on..... And trust me I'm not a NOOB
U can see it just in very low light.... At night )
Yup! Have noticed that with other phones too. It will be a very faint glow that you can see in the dark. I've seen it on at times too but it hasn't affected function so I never gave it a second thought
terrorblade23 said:
And now I saw that my proximity sensor Is always on, I can see the red light even if my phone is locked... And I'm worried that is using my battery I got 5 or 6 h display max with 1 day of usage
Click to expand...
Click to collapse
This is not a concern. The proximity sensor is an infra red sensor and emits a faint amount of visible red light. All of the S5's do that, it's normal and it is no barrier to great battery life.
If you did a forum search you would find existing threads where this has been asked and answered before. The glow probably represents the average bias current as the sensor periodically polls it's environment every x ms. In any event it's normal and expected behaviour.
.
fffft said:
This is not a concern. The proximity sensor is an infra red sensor and emits a faint amount of visible red light. All of the S5's do that, it's normal and it is no barrier to great battery life.
If you did a forum search you would find existing threads where this has been asked and answered before. The glow probably represents the average bias current as the sensor periodically polls it's environment every x ms. In any event it's normal and expected behaviour.
.
Click to expand...
Click to collapse
Thank you man... I was just worried because after I restart, it doesn't remain on and it s ok for some time (I think) ... And I can't see that infrared light... But after some time it stay on always )
After a fresh reboot, there may not be any apps using the proximity sensor. But a lot of apps do make use of it, so as soon as you use an app that does, the sensor will start monitoring and there will be that glow.
I don't think that the sensor uses much battery in most apps as mine is usually on. Even my screensaver makes use of the sensor and I still get great battery life.
.
fffft said:
After a fresh reboot, there may not be any apps using the proximity sensor. But a lot of apps do make use of it, so as soon as you use an app that does, the sensor will start monitoring and there will be that glow.
I don't think that the sensor uses much battery in most apps as mine is usually on. Even my screensaver makes use of the sensor and I still get great battery life.
.
Click to expand...
Click to collapse
please can you tell me name of these apps who are using proximity sensor becoz in my case i haven't installed any app that will use it
[/COLOR]
amolmk said:
please can you tell me name of these apps who are using proximity sensor becoz in my case i haven't installed any app that will use it
Click to expand...
Click to collapse
finally i solved it.... it was Smart remote software and that software using air gesture.... i disabled "use air gestures" option from setting in smart remote app and problem solved :good:
i hope this information helpful for everyone....
Related
This may be a total noob question, but I was just curious to know the exact location of the light sensor because I cant seem to figure out where it is located.
EricSS619 said:
This may be a total noob question, but I was just curious to know the exact location of the light sensor because I cant seem to figure out where it is located.
Click to expand...
Click to collapse
That dot that looks like a front facing camera (FFC) - that is your sensor there that controls screen on/off on calls and the auto brightness.
riggsandroid said:
That dot that looks like a front facing camera (FFC) - that is your sensor there that controls screen on/off on calls and the auto brightness.
Click to expand...
Click to collapse
Are you sure, because when I ran sensor test that dot did change the proximity sensor values, but the light values wouldnt change even if I covered it completely.
The only way I was able to change the light value was to move the whole phone into a darker or brighter location, but not by finding a pinpoint sensor on the phone.
Edit 2: When I cover the proximity sensor dot (the obvious one) with my finger and shine a light at the phone, nothing happens, and when I remove my finger from the dot and shine a light right on it, the screen gets brighter. I suspect both sensors are in the same spot (the plastic dot you see probably transmits ambient light to the light sensor as well as housing the proximity sensor, in the way many computers use a little clear/frosted plastic piece to indicate the status of an LED that is buried in the chassis.
Try it with a flashlight and see if you get different results.
If you are interested in disabling the light sensor go into settings and manually set your brightness.
I have to say the proximity sensor works much better than on my Hero.
Sent from my HTC Evo Shift 4G
i noticed the proximity sensor responds much faster than the one on my Evo
The light sensor is just to the right of the proximity sensor under the speaker grill. Turn on auto-brightness and test it with your finger.
Sent from my PG06100
BrandoKC said:
If you are interested in disabling the light sensor go into settings and manually set your brightness.
I have to say the proximity sensor works much better than on my Hero.
Sent from my HTC Evo Shift 4G
Click to expand...
Click to collapse
thats because i dont believe there is a proximity sensor on the hero.
karnoff said:
thats because i dont believe there is a proximity sensor on the hero.
Click to expand...
Click to collapse
I guess that's why it would be working better!
hello
my sgs2 have a problem he brings a light by my camera the proximity sensor.
and he brings red light what is this is this a wetness warning or what?
my olde sgs2 hes in the water falls. and i have a new sgs2. only he gives to red light in the sensor and he was wet.
is that the problem or what?
Ehh.. What?
Sent from my GT-I9100 using XDA Premium App
My sensor gives red light the proximity sensor. Sorry for my english. Id this normal?
Sent from my GT-I9100 using XDA App
He is saying his proximity sensor is red. Mine is red too. I think its normal. I can only see it when its dark though
Sent from my GT-I9100 using XDA App
Yep, very weak red light is normal. That's because it rather bright near infrared light.
Okay i can see i call and sometime when my phone is in standby have anyone this problem?
And when i test the sensor with AndroSensor than can i see rhe redlight. Some people says on a forum that the sensor cans see of the phone wet is with water...
Sent from my GT-I9100 using XDA App
rvosde1993 said:
hello
my sgs2 have a problem he brings a light by my camera the proximity sensor.
and he brings red light what is this is this a wetness warning or what?
my olde sgs2 hes in the water falls. and i have a new sgs2. only he gives to red light in the sensor and he was wet.
is that the problem or what?
Click to expand...
Click to collapse
when you are making call or sensor is activated somehow it' became red.
thats normal. dont panic.
It has nothing to do with water.
Okay. I will thank our now i can good sleep have a nice night or day!
Sent from my GT-I9100 with (Litening Rom 5.0) using XDA App
My proximity sensor will lit up the red light whenever I open up TalkBox app, I don't understand why as that app doesn't even use proximity sensor, maybe a bug or coding error in the program.
xsaintzx said:
My proximity sensor will lit up the red light whenever I open up TalkBox app, I don't understand why as that app doesn't even use proximity sensor, maybe a bug or coding error in the program.
Click to expand...
Click to collapse
Most probably .. contact the maker ..
rvosde1993 said:
hello
my sgs2 have a problem he brings a light by my camera the proximity sensor.
and he brings red light what is this is this a wetness warning or what?
my olde sgs2 hes in the water falls. and i have a new sgs2. only he gives to red light in the sensor and he was wet.
is that the problem or what?
Click to expand...
Click to collapse
i guess its a wetness sensor.. as i just experienced this issue some time back...
i had just taken a bath n my cell starting ringing, i went ahead n received the call without drying myself. As soon as i ended the call my screen went off, there was this red light coming out of one of the sensors, and the phone wasn't even switching on. I had to remove the batteries and place them back after which it started like normal.
xsaintzx said:
My proximity sensor will lit up the red light whenever I open up TalkBox app, I don't understand why as that app doesn't even use proximity sensor, maybe a bug or coding error in the program.
Click to expand...
Click to collapse
Talkbox uses the proximity sensor to determine how you are listening to your messages. If you hold the phone up to your ear then it will play the message through the earpiece. If you hold it away from your face then it will use the speaker.
karakemal said:
when you are making call or sensor is activated somehow it' became red.
thats normal. dont panic.
Click to expand...
Click to collapse
thx bro. i almost freaked out wen it happened again. and then i noticed that it only turns red wen m making a call ^_^
I have a problem with my proximity sensor too...
whenever im playing games/smsing/browsing with the phone...pretty much anything...
the red light is up...the only time its off is when lock...i used lcd test...it works fine(except ppl's proximity is 'null'...mine was '0')...anyone had this type of problem?
thx...=)
xWishx said:
I have a problem with my proximity sensor too...
whenever im playing games/smsing/browsing with the phone...pretty much anything...
the red light is up...the only time its off is when lock...i used lcd test...it works fine(except ppl's proximity is 'null'...mine was '0')...anyone had this type of problem?
thx...=)
Click to expand...
Click to collapse
null = 0 -.-
then any idea why is my proximity sensor light always on?i don think its normal...=)
xWishx said:
then any idea why is my proximity sensor light always on?i don think its normal...=)
Click to expand...
Click to collapse
It may be a bug or something... Did you try updating your phone, or flashing a new stock/custom ROM to see if the problem remains ?
Proximity sensor which is located beside the front facing camera will always be activated whenever you're in a call. It's slightly red in colour, and more noticable in a dark room. To see the proximity sensor in action you can go to the phone dialer and key in *#0*# and it will bring up the LCD test. Select sensor and you can see the red light of the proximity sensor being lit up. Hover your finger or an object over the proximity sensor (need not to be covering the sensor) and the phone will vibrate and so will the background change to green.
SGS-II said:
Proximity sensor which is located beside the front facing camera will always be activated whenever you're in a call. It's slightly red in colour, and more noticable in a dark room. To see the proximity sensor in action you can go to the phone dialer and key in *#0*# and it will bring up the LCD test. Select sensor and you can see the red light of the proximity sensor being lit up. Hover your finger or an object over the proximity sensor (need not to be covering the sensor) and the phone will vibrate and so will the background change to green.
Click to expand...
Click to collapse
Lol at you... Did you even bother reading the first page of the thread ? Guess not, since you're just repeating what we already told the guy
Found this on Engadget, and wanted to let you know, in case you haven't seen it. the HD2 is supa!
http://forum.xda-developers.com/showthread.php?t=1236027
http://www.engadget.com/2011/08/28/htc-hd2-keeps-spry-with-mango-rtm-and-custom-rom-looks-to-clear/
Okay, now I might start thinking about Dual-boot and forget about Android's Single-boot .
if you see the video on engadget, there is something "flickering" next to the orange charging light...WTF is that? seems like the proximity sensor or ambient light sensor is emitting a flickering light! WTF?
great development though, shows the HD2 and its devs still have a lot of oomph left, go go go!!!
have the solved the cloud problem? kinda sucks if you can't use a vast majority of the OS services that run in the cloud.
ASCIIker said:
if you see the video on engadget, there is something "flickering" next to the orange charging light...WTF is that? seems like the proximity sensor or ambient light sensor is emitting a flickering light! WTF?
Click to expand...
Click to collapse
It's the infrared LED that the proximity sensor uses. Digital cameras can pick up on it but the naked eye cant. If your proximity setting is on, then the LED will constantly be sending out IR pulses to gauge your distance as you use it.
Just as the title says-
I am not able to locate the light ambient sensor on my A500 tab- My previous A500 got replaced by acer because the speakers were defective in some way-
I have read that the light sensor is located below the volume rocker and rotation switch on the black glass and can be seen under bright light- i tried every way to find it no success.
I tried "proximityscreenoff" and "sensorlist" from the market. Both of the freewares listed an ambient light sensor on my device as -"Lite-on al3000a Ambient Light sensor"-
BOTH THE APPS COULD NOT GET ANY DATA FROM THE SENSORS :O-
DO we even have a sensor? or is it just me without it?
Can someone please use the apps and tell me if any data is being collected from the sensors?
Highly appreciated- thanks you
I tried with Sensor List and it does indeed show up the sensor, but doesn't seem to be getting any data from it. So it's not just your tablet.
Same thing with "AndroSensor", it shows it but no data change in it either. Hopefully we can figure out what the issues is? Are both of you using the factory install rom? Or a rooted one with a tweaked kernel?
sda.171 said:
Just as the title says-
I am not able to locate the light ambient sensor on my A500 tab- My previous A500 got replaced by acer because the speakers were defective in some way-
I have read that the light sensor is located below the volume rocker and rotation switch on the black glass and can be seen under bright light- i tried every way to find it no success.
I tried "proximityscreenoff" and "sensorlist" from the market. Both of the freewares listed an ambient light sensor on my device as -"Lite-on al3000a Ambient Light sensor"-
BOTH THE APPS COULD NOT GET ANY DATA FROM THE SENSORS :O-
DO we even have a sensor? or is it just me without it?
Can someone please use the apps and tell me if any data is being collected from the sensors?
Highly appreciated- thanks you
Click to expand...
Click to collapse
I got Sensorlist and tried it and I do get data from it.
xhz/xxxx or xxxxxms and a red line. The upper limit is 227 and lower limit is -227 and the red checked number changes. It's nowhere as quickscrolling as the other sensors but I get a jagged red line moving across.
okay guyz i think i figured this whole thing out most probably-
I just came back from this electronic store, i closely examined the iconia on display- a500 - noticed the black glass under the volume rocker and rotation lock and THE LIGHT SENSOR WAS THERE! :O - looking like just any ordinary light sensor-
This made me come up to the following conclusions- since i have had another iconia before i returned it for warranty- i was able to identify the following differences-
1st variant-model
Light sensor present
Mic volume low
Volume locker button hard to push
Power button sorta pushed inside
2nd variant model -( the one i currently have)
Light sensor absent? Or hidden under black glass? (Manufacturing defect?)
Loose rotation lock (hardware) toggle
Mic volume high (as in proper)
-(i faced these additional problems)-> glass over the camera came off and the glossy label on the side slipped out.
So if u have the first variant, the one i previously had and the one i examined in the shop today- that should give u data from the light sensor, and the 2nd variant with hidden/absent light sensor won`t.
These are my findings. Feel free to point out and discuss-
What should we do? I m considering a second replacement now -_____-
With AndroSensor app open, try to put some direct light above the sensor and see if it shows some readings. I noticed that the sensor is in a sort of sleep status until it sees some light; after then it kinda wakes up and works properly.
I appear to have what you call the second variant model. I just checked with Androsensor, and the light sensor does appear to be present beneath the black glass, just under the volume up rocker. I agree it does appear to sleep until it senses a light source.
cm0901 said:
With AndroSensor app open, try to put some direct light above the sensor and see if it shows some readings. I noticed that the sensor is in a sort of sleep status until it sees some light; after then it kinda wakes up and works properly.
Click to expand...
Click to collapse
I just downloaded andro sensor-
Under light sensor it sed-waiting for event-
I took my hd2, turned on the flash! Pointed it right above the sensor and no response, it just kept saying waiting for event- so does this mean i have a defective sensor?
Can this be a kernel/rom related issue?
Pls someone try this and let us all noe.
Thanks
It's a long shot but you might attempt flipping the check mark a few times under the brightness setting and "auto adjust" as that probably toggles the sensor as well, though these apps are supposed to do it. Or close and start the app a few times and then check the sensor. I don't know what activates it but I can confirm that it has some kind of threshold where it sleeps or isn't active and another where it is, so you might want to try various things to, as others have mentioned, wake it up.
Are you using any ROMS by any chance or are you on stock? Have you done any sort of modification of the system - rooted and removed things or replaced kernels, etc?
If you are on a ROM or have done any modifications, you may want to try going back to full stock 3.2 or 3.1 and seeing if that helps before you decide it's actually defective.
Just double checked mine running a 3.2 rooted with thor's kernel. The sensor is working fine. But i did have to uncheck the box for the auto screen brightness to wake it up. Then i used a led maglight on the senor.
Readings from Androsensor:
Light (0.5mA)
55.0 lux
With the maglight cut on it.
65790.0 lux.
Please note with the maglight cut on you can see the light sensor hole then.
KILLER_K said:
Just double checked mine running a 3.2 rooted with thor's kernel. The sensor is working fine. But i did have to uncheck the box for the auto screen brightness to wake it up. Then i used a led maglight on the senor.
Readings from Androsensor:
Light (0.5mA)
55.0 lux
With the maglight cut on it.
65790.0 lux.
Please note with the maglight cut on you can see the light sensor hole then.
Click to expand...
Click to collapse
Same as Killer, seems to be working, rooted 3.2, couldnt see until bright light on it.
Anyone have any idea where the mic(s) are, not really important just wanna know which end to scream into when doing voice search
Mic is located directly in the top center of the front face, in the space between the glass and the bezel. You should be able to see it with just a small amount of light shining on it.
FINALLY!
after various non stop auto brightness toggle on and offs - waiting for event went and 1 lux came xD - i shone light the reading increased - and stopped working agen :|
I dunnu maybe the apps are not fully compatible.
I can say it is working because i changed my brightness to full manually and then turned auto on and the brightness level set itself automatically.
So will we have to wake up the sensor from a state of sleep all the time or is it just for the apps xP - last confusion.
Thanks every1 for ur responses, the mystery is finally coming to an end xD!
Hi guys, i have a big problem on my phone Mi A1, is the always active proximity sensor.... Drain battery, does anyone find my same problem? Take a test with a camera, you can not see with the naked eye! Thanks
I have attached the video!!
BUG OR FAULTY?
my video, search on youtube: Proximity Sensor always on Xiaomi Mi A1 BUG?
THANKS
https://www.youtube.com/watch?v=zdONFH0B6xg
UPDATE VIDEO: https://www.youtube.com/watch?v=H09kbi4-DCM
Mr.Oscar said:
Hi guys, i have a big problem on my phone Mi A1, is the always active proximity sensor.... Drain battery, does anyone find my same problem? Take a test with a camera, you can not see with the naked eye! Thanks
I have attached the video!!
BUG OR FAULTY?
my video, search on youtube: Proximity Sensor always on Xiaomi Mi A1 BUG?
THANKS
https://www.youtube.com/watch?v=zdONFH0B6xg
Click to expand...
Click to collapse
Unfortunately it looks like a bug in newest February stable stock ROM.....
This is how it looks like on my phone:
https://www.youtube.com/watch?v=0SO34GCD8Pg
ves626 said:
Unfortunately it looks like a bug in newest February stable stock ROM.....
This is how it looks like on my phone:
https://www.youtube.com/watch?v=0SO34GCD8Pg
Click to expand...
Click to collapse
Thanks, i have oreo patch january and on my xiaomi, when the screen is off, stops flashing
Yep! It is blinking when the screen is on. (I'm on February Patch.)
I'm on February patch and not facing this behaviour. Maybe you have an app making phone work like this? Hope you solve it.
carmeloamg said:
I'm on February patch and not facing this behaviour. Maybe you have an app making phone work like this? Hope you solve it.
Click to expand...
Click to collapse
No, I don't have any application which does this. Check it by a camera ( I think it is infrared) and when the screen is ON.
My proximity sensor test
Same here also
Mr.Oscar said:
Hi guys, i have a big problem on my phone Mi A1, is the always active proximity sensor.... Drain battery, does anyone find my same problem? Take a test with a camera, you can not see with the naked eye! Thanks
I have attached the video!!
BUG OR FAULTY?
Click to expand...
Click to collapse
I think it's a bug in new February Patch Stable Update
First of all, I can't reproduce it (used my work iPhone's camera, and yes iPhone sucks but it's for my job, no choice here ).
Second, are you sure it's a bug? Did you do similar check before Feb update?
I'm not a pro of phone hardware, but it seems normal to me that the sensor will be always working. I'm even using an app to wake the phone with the sensor (https://play.google.com/store/apps/details?id=com.jarsilio.android.waveup) so the sensor is working all the time, even with screen off.
It's not a bug, it's the same for a lot of phones, don't worry
N1ck474 said:
It's not a bug, it's the same for a lot of phones, don't worry
Click to expand...
Click to collapse
thanks, many mi1 owners do not have this bug
BtB said:
First of all, I can't reproduce it (used my work iPhone's camera, and yes iPhone sucks but it's for my job, no choice here ).
Second, are you sure it's a bug? Did you do similar check before Feb update?
I'm not a pro of phone hardware, but it seems normal to me that the sensor will be always working. I'm even using an app to wake the phone with the sensor (https://play.google.com/store/apps/details?id=com.jarsilio.android.waveup) so the sensor is working all the time, even with screen off.
Click to expand...
Click to collapse
thanks bro, I'm not sure it's a bug, however the sensor should only be activated for calls
It's not a bug. The proximity sensor is also used for auto brightness control.
When the proximity sensor is tripped, values from the light sensor is ignored, which means that screen brightness won't change even when the light sensor detects changes in ambient light.
This is useful for e.g. when you play a game or watching a movie in landscape and your hand covers the light sensor. The screen won't go dark, but stays at the same brightness. Without the proximity sensor activated, your screen would go dark every time you accidentally cover the light sensor with your hand.
Try turning off adaptive brightness and see if it's still on. It shouldn't be necessary to have the proximity sensor on all the time if you set the screen to a fixed brightness.
quetzalcoatl2435 said:
It's not a bug. The proximity sensor is also used for auto brightness control.
When the proximity sensor is tripped, values from the light sensor is ignored, which means that screen brightness won't change even when the light sensor detects changes in ambient light.
This is useful for e.g. when you play a game or watching a movie in landscape and your hand covers the light sensor. The screen won't go dark, but stays at the same brightness. Without the proximity sensor activated, your screen would go dark every time you accidentally cover the light sensor with your hand.
Try turning off adaptive brightness and see if it's still on. It shouldn't be necessary to have the proximity sensor on all the time if you set the screen to a fixed brightness.
Click to expand...
Click to collapse
Thanks for reply, I deactivated ambient display, and automatic brightness.
But it still does!
If can help someone I mock value with sensor disable xposed module.
My set is 2.5 (half of total value)
But my phone is a redmi 4a