[Q] Samsung setup wizard stopped - Galaxy Note 3 Q&A, Help & Troubleshooting

G'day everyone,
For the first time I rooted my device to Omega and its not working properly(I might did something wrong). Then I downloaded the android version an did the process as per the website using odin v3.07. Its all good as per the application. When I tried to do all the setup on my phone, its displayed this message. I did atleast 10 times and its the same. I even reset and data wipe and nothing happening other than this message.
Can someone help me to overcome this problem.
TIA

Related

[Q] Galaxy tab factory setting modified

I have a Sprint tab.
And I have been using it normally.(meaning I only browse and play games with it)
After two days it runs out of battery, upon reboot it restored to when I have used it for like 30 minutes (downloaded a few apps and synced my gmail acc).
I didn't pay much attention to it until I restarted it again, guess what, it restored again, exactly like I have used for 30 minutes or so.
I thought there was something wrong with the setting so I used factory reset. However, it DIDN'T work, it still restores to the 30 minutes state, with my account synced and everything...
Lately I tried to flash it but it fails at the end.. with the msg "Complete(Write) operation failed."
Now I have problem booting the machine and it's verging on being a brick...can someone help out??
Need more info before anyone will be able to try and help you:
What ROM are you currently on?
What ROM are you trying to flash to?
Are you trying to flash with Odin or Hemidal?
How did you setup the flash (eg. re-partition or not etc)
What state is the Tab in now?
bdl1969 said:
Need more info before anyone will be able to try and help you:
What ROM are you currently on?
What ROM are you trying to flash to?
Are you trying to flash with Odin or Hemidal?
How did you setup the flash (eg. re-partition or not etc)
What state is the Tab in now?
Click to expand...
Click to collapse
sry 4 not being clear...
To your questions:
I'm not sure what ROM because it keeps failing so I tried almost all ROMs, even GSM ones... I flashed with Odin with re-partition and now I just want to get it back to normal
I can use the tab right now but there're lots of errors coming up and if I try to reboot, it goes back to the 30 minutes state...
not sure that clarifies things or not...
In essence, I guess some of the contents are locked and can't be replaced by flashing
You should give this a try if you haven't already. A lot of progress has been made on the sprint ROM since you stated this thread.
http://forum.xda-developers.com/showthread.php?t=869819
linuxkidd said:
You should give this a try if you haven't already. A lot of prophetess progress has been made on the sprint ROM since you stated this thread.
http://forum.xda-developers.com/showthread.php?t=869819
Click to expand...
Click to collapse
I did and the problem persists.
I'm officially done with the tab and hope Samsung will repair it for me.
Sorry to dig up an old thread.
Long time lurker of the forums first time poster.
I bought the Sprint tab while over in the States for Christmas and it has been running fine since then.
But 2 weeks ago i started gettting multiple fc's and battery was draining very quickly.
Since then i have tried factory resets on multiple occasions and flashing quite a few different ROMS all to no avail.
Did you end up getting anywhere with this issue at all?
I live in Australia and it is going to be a PITA to get this fixed through warranty with Samsung.

[Q] SGH-I337M Stuck on Boot Screen

I really hope someone here can help me. I'm running an SGH-1337M (Rogers). I rooted the device a number of months ago with Motochopper and installed Foxhound ROM GT-i9505 (which every guide says works with the SGH-1337M). I've been running this rom for quite a while without issues. Yesterday I I installed Cyanogenmod (cm-10.2-20131102-SNAPSHOT-M1-jfltecan) which worked, until I rebooted the device. When I reboot the phone gets stuck on the Samsung Galaxy S4 boot logo. I've booted into TWRP and tried to reinstall the Foxhound rom which was working but end up with the same results. I've used Kies Firmware upgrade to try and set everything back to default without sucess. Using Odin I tried to reinstall a factory image of my phone, which is sucessfull except nothing changes.
Currently, if using TWRP I do a full wipe of my phone and then install Cyanogenmod it'll work, so long as I don't reboot. If I reboot I need to do a full wipe, reinstall the rom and start all over.
I'm at a complete loss here. I've spent the last 5 hours looking for a solution to this problem without success. Any help is greatly appriciated.
Thanks
jer007 said:
I really hope someone here can help me. I'm running an SGH-1337M (Rogers). I rooted the device a number of months ago with Motochopper and installed Foxhound ROM GT-i9505 (which every guide says works with the SGH-1337M). I've been running this rom for quite a while without issues. Yesterday I I installed Cyanogenmod (cm-10.2-20131102-SNAPSHOT-M1-jfltecan) which worked, until I rebooted the device. When I reboot the phone gets stuck on the Samsung Galaxy S4 boot logo. I've booted into TWRP and tried to reinstall the Foxhound rom which was working but end up with the same results. I've used Kies Firmware upgrade to try and set everything back to default without sucess. Using Odin I tried to reinstall a factory image of my phone, which is sucessfull except nothing changes.
Currently, if using TWRP I do a full wipe of my phone and then install Cyanogenmod it'll work, so long as I don't reboot. If I reboot I need to do a full wipe, reinstall the rom and start all over.
I'm at a complete loss here. I've spent the last 5 hours looking for a solution to this problem without success. Any help is greatly appriciated.
Thanks
Click to expand...
Click to collapse
After you did odin, you must do a factory reset. This should clear up the problem. And, are you using the correct kernel for cyan?

[Q] Setup wizard as stopped

Hi guys,
Having issues with my Nexus.
Tried to root it earlier, which for some reason didn't work and get failed messages when installing zip.
Now I can't even use the tablet, getting the setup wizard as stopped working error literally everytime and can't get anywhere further.. I've tried connecting it to PC and doesn't read the Nexus so I have no idea what to do.
Tried factory reset and still the setup error occurs.
Any help would be appreciated.

[Q] trying to return to stock - tons of errors in the process

Up until now I had a Galaxy S4 running omega ROM with a custom kernel (can't remeber which) and every so often I experianced a SIM card remove and needed to reboot - the other day, my mom decided to switch cellular compeny, and I recieved a new SIM - It all worked fine, until the next day I got an invalid SIM error and the phone was not usable - So I decided I would return to stock incase it would help or atleast it will return the warranty and allow me to let someone else fix it.
I followed a certain guide in this forum in order to return it to stock, and when the phone booted up - I got a "process.android.acore has stopped working error" - constantly flashing - making the phone unusable.
I wiped the cache and dalvik cache and did a factory reset, and formated every mount on my galaxy - and reflahed the stock firmware - and it fixed it - but now I have a "Samsung keyboard has stopped working" error - making me unable to text ever (tried clearing the app cache and data -didn't work) - and it also shows up when I don't use the samsung keyboard.... and there is the invalid SIM thing... I am stuck and have no Idea how to fix this thing... so... any suggestions?
gilmishal said:
Up until now I had a Galaxy S4 running omega ROM with a custom kernel (can't remeber which) and every so often I experianced a SIM card remove and needed to reboot - the other day, my mom decided to switch cellular compeny, and I recieved a new SIM - It all worked fine, until the next day I got an invalid SIM error and the phone was not usable - So I decided I would return to stock incase it would help or atleast it will return the warranty and allow me to let someone else fix it.
I followed a certain guide in this forum in order to return it to stock, and when the phone booted up - I got a "process.android.acore has stopped working error" - constantly flashing - making the phone unusable.
I wiped the cache and dalvik cache and did a factory reset, and formated every mount on my galaxy - and reflahed the stock firmware - and it fixed it - but now I have a "Samsung keyboard has stopped working" error - making me unable to text ever (tried clearing the app cache and data -didn't work) - and it also shows up when I don't use the samsung keyboard.... and there is the invalid SIM thing... I am stuck and have no Idea how to fix this thing... so... any suggestions?
Click to expand...
Click to collapse
Hi,
I would recommend you to make a factory reset, flash another stock rom as your current one and then wipe again. Maybe your rom was damaged when you downloaded it.
Sent from my Galaxy S4 using Tapatalk
Update
Ok, I managed to download another keyboard and it fixed it... I still think it needs a better fix... I managed to get it to recognise the SIM, but it is not stable and stable - and goes away until I play with it - turning device on and off, wiping cache.

Contact Problem

Hello Bro.
I am using Galaxy S5 (SM-G900I) Official lollipop 5.0 firmware and rooted.
i have a weird problem with my phone. when i try to search a contact on dialler (screen shot attached). contact results stuck and take minimum 1-2 minutes to show the results and not even get back. the same problem at message app too
i have tried clearing data and rebooting
i have tried wipe data/cache. after reset phone it work fine for some days. but again same problem starts
but didn't help
PLEASE HELP ME.

Categories

Resources