[Q] Please help! Boot loop and recovery error! - G2 Q&A, Help & Troubleshooting

Hi. I have a Verizon LG G2 VS980, which I rooted a few days ago. I had some trouble flashing TWRP and that has caused some issues now. When my phone is turned on, it just recycles the Verizon animation. When I try to do a hard reset, I get a "secure booting error" and then the phone turns off. When I go into download mode to possibly download firmware updates it just sits at 0%. I'm completely lost and can't seem to find any help that is unique to my problem. If you can help, please leave very detailed instructions. Thank you.

Victim22 said:
Hi. I have a Verizon LG G2 VS980, which I rooted a few days ago. I had some trouble flashing TWRP and that has caused some issues now. When my phone is turned on, it just recycles the Verizon animation. When I try to do a hard reset, I get a "secure booting error" and then the phone turns off. When I go into download mode to possibly download firmware updates it just sits at 0%. I'm completely lost and can't seem to find any help that is unique to my problem. If you can help, please leave very detailed instructions. Thank you.
Click to expand...
Click to collapse
Follow this thread to flash stock firmware. Look for VS980 and do whats told.
And dont forget to change COM port to COM41 from device manager of pc. Its very important.
This thread is detailed enough. Still if u dont understand anything feel free to ask.
http://forum.xda-developers.com/showthread.php?p=45293512

Te$la said:
Follow this thread to flash stock firmware. Look for VS980 and do whats told.
And dont forget to change COM port to COM41 from device manager of pc. Its very important.
This thread is detailed enough. Still if u dont understand anything feel free to ask.
http://forum.xda-developers.com/showthread.php?p=45293512
Click to expand...
Click to collapse
thanks for the reply. will try this.

Te$la said:
Follow this thread to flash stock firmware. Look for VS980 and do whats told.
And dont forget to change COM port to COM41 from device manager of pc. Its very important.
This thread is detailed enough. Still if u dont understand anything feel free to ask.
http://forum.xda-developers.com/showthread.php?p=45293512
Click to expand...
Click to collapse
Which method should I do? KDZ or TOT? What's the difference? Thanks in advance.

Te$la said:
Follow this thread to flash stock firmware. Look for VS980 and do whats told.
And dont forget to change COM port to COM41 from device manager of pc. Its very important.
This thread is detailed enough. Still if u dont understand anything feel free to ask.
http://forum.xda-developers.com/showthread.php?p=45293512
Click to expand...
Click to collapse
I did the KDZ method, but the LG Mobile Support Tool stops and says "lost connection to server". Then I click retry and it stops at 2% and says "Upgrade stopped due to an error". I've retried many times. Also, I made sure to download the KDZ file under Verizon. I don't understand.

Victim22 said:
I did the KDZ method, but the LG Mobile Support Tool stops and says "lost connection to server". Then I click retry and it stops at 2% and says "Upgrade stopped due to an error". I've retried many times. Also, I made sure to download the KDZ file under Verizon. I don't understand.
Click to expand...
Click to collapse
Kdz should be fine.
LG Mobile Support Tool?? You should be using LG FLASH TOOL mentioned in the post.
Did u download all the files and drivers needed?
To enter Download Mode press and holding vol up key insert the usb cable.
If Normal flash doesnt work try CSE flash located at the bottom of the tool.

Te$la said:
Kdz should be fine.
LG Mobile Support Tool?? You should be using LG FLASH TOOL mentioned in the post.
Did u download all the files and drivers needed?
To enter Download Mode press and holding vol up key insert the usb cable.
If Normal flash doesnt work try CSE flash located at the bottom of the tool.
Click to expand...
Click to collapse
During the process, the LG Flash Tool opens up the LG Mobile Support Tool. Yes, I downloaded the verizon kdz file and both drivers. I followed the guide but no luck.

Victim22 said:
During the process, the LG Flash Tool opens up the LG Mobile Support Tool. Yes, I downloaded the verizon kdz file and both drivers. I followed the guide but no luck.
Click to expand...
Click to collapse
Strange problem!!
Try uninstalling LG Mobile Support Tool and try again every step very carefully.
If that also fails, hope u got warranty, so take it to service center and i think its the best option as of now.

Te$la said:
Strange problem!!
Try uninstalling LG Mobile Support Tool and try again every step very carefully.
If that also fails, hope u got warranty, so take it to service center and i think its the best option as of now.
Click to expand...
Click to collapse
The same thing was happening to mine! All I did to fix it was....
1. Make sure its turned off by holding the power button until the lg logo stops popping up
2. Hold down Power button+Volume down at the same time
3. Let go of both when you see the lg logo come up and quickly hold down on the power button again
4. From here a white screen will come up saying something like (to factory reset press the power button)
5. After you press it TWRP or Clockwork revovery will come up depending on what you installed
6. Recover your backup
I really hope this helped you!

Related

Unbrick lg optimus l3 using kdz updater

To Anyone who gets problem to unbrick your LG Optimus L3 e400
It Really works for me.
How to instal LG Firmware using KDZ Updater
1. Download and Install USB driver for Lg L3 e400 from LG website or here
2.Download and install MSXML 4.0 SP3. here.
3.Download KDZ Updater here then extract it to your computer.
4. Download KDZ file according to your country or any compatible KDZ file. Download here
How to use KDZ:
1. Detach your external SD from your phone.
2. Remove your phone battery and wait for a few seconds.
3. Put your battery back to the phone.
4. Press volume - and + (or just in the middle of volume button) and power button at the same time.
5. wait till the phone screen turns to yellow (emergency mode) then release all the buttons.
6. Connect your phone to PC by using USB cable (your LG cable).
7. Stop or disable your antivirus or antimalware.
8. Run KDZ Updater as administrator.
9. Choose the following options in KDZ Updater:
Type: 3GQCT
Phone Mode: DIAG
and browse KDZ file is the one you downloaded, browse where you put this file and then select.
9. Click on “Launch Software Update”
10. If everything goes well, you will see “Finished” on KDZ Updater screen. Your phone will restart itself. You'll see the opening screen.
If something wrong happen it's usually because of the wrong download of KDZ file, broken KDZ Updater, or your antivirus.
I hope this could unbrik your LG L3 phone.
How to Root it.
After doing all the above now you can root your device again with this. Extract the file you just downloaded to your root of your computer.
Connect your device to the computer, then double click run.bat and wait till the device restart.
Now your device is rooted again
How to get CWM
Download from Google Play Rom Manager and download your CWM with this apk while online.
Good Luck
Hi, im a l5 user but the process, im new with this device, but if i flash a rom by kdz i'll need do root,install cwm, and unlock bootloader again?
AfonsoADR said:
Hi, im a l5 user but the process, im new with this device, but if i flash a rom by kdz i'll need do root,install cwm, and unlock bootloader again?
Click to expand...
Click to collapse
Yes, You do need to root and install cwm again.
afonsoadr said:
hi, im a l5 user but the process, im new with this device, but if i flash a rom by kdz i'll need do root,install cwm, and unlock bootloader again?
Click to expand...
Click to collapse
Yes. You do need to root and reinstall cwm because it's very safe.
I have 4.0.4 ICS (cm9) on my LG L3 (e400), I tried to flash to stock since official 4.4 (kitkat) is coming soon but it does nothing, just reboots normally after flashing (no errors reported with kdz flasher) with my wallpaper and everything, and it says that my battery is charging but it's not connected to charger or computer. Any ideas?
I did everything from the guide, step by step, and I'm stuck on this error: Upgrade Error: Wparam: 100 LParam :1010
I especially looked ower firmware, and I'm positive that I downloaded the right one.
I tried several times, and every time I get this error. Also, phone now boots to Emergency mode, and can't boot to something else.
Don't know what to do? Anyone help?
Just reinstall driver, reboot pc after instalation and run kdz as admin.
Sent from my LG-E400 using XDA Premium 4 mobile app
konjkonjkonj said:
I did everything from the guide, step by step, and I'm stuck on this error: Upgrade Error: Wparam: 100 LParam :1010
I especially looked ower firmware, and I'm positive that I downloaded the right one.
I tried several times, and every time I get this error. Also, phone now boots to Emergency mode, and can't boot to something else.
Don't know what to do? Anyone help?
Click to expand...
Click to collapse
You can only enter emergency mode because you haven't finished installing_KDZ. If I were you I would try download and install another KDZ file.
It will only work when you get the right KDZ file for your device. Don't worry to try another KDZ file.
Try another KDZ updater,
Unable antivirus and firewall.
Keep on trying. I hope these will unbricked your phone.
Sent from my LG-P705 using XDA Premium 4 mobile app
mr_techno said:
I have 4.0.4 ICS (cm9) on my LG L3 (e400), I tried to flash to stock since official 4.4 (kitkat) is coming soon but it does nothing, just reboots normally after flashing (no errors reported with kdz flasher) with my wallpaper and everything, and it says that my battery is charging but it's not connected to charger or computer. Any ideas?
Click to expand...
Click to collapse
Try hard reset
Sent from my LG p705 using XDA Dev Soft.
george brown said:
Try hard reset
Sent from my LG p705 using XDA Dev Soft.
Click to expand...
Click to collapse
I can't turn it off completely without removing the battery. When I place back the battery it turns on immediately, so I don't have time to hold button combo..... :/
Download Quick Boot Reboot from play store. Run it select recovery then it should hard reset your device.
Sent from my LG p705 using XDA Dev Soft.
mr_techno said:
I can't turn it off completely without removing the battery. When I place back the battery it turns on immediately, so I don't have time to hold button combo..... :/
Click to expand...
Click to collapse
After removing battery wait about 15 seconds and put it back. If it still fails, remove battery and wait for longer time.
Just keep on trying.
Sent from my LG-P705 using Tapatalk
Delete
help me
please help me... why after i press start upgrade at kdz updater. it says phone was not found even says it Finnish and nothing happen next? either i am connected to pc and already have needed drivers? please can you help me. i installed cyanoid14 standard and my phone goes boot loop like blinking white background infinitely
Have you tried entering into CWM?
If so, then you should do factory reset, wipe cache, and go to advance then wipe dalvik cache then restart your phone.
Sent using Tapatalk
george brown said:
After removing battery wait about 15 seconds and put it back. If it still fails, remove battery and wait for longer time.
Just keep on trying.
Sent from my LG-P705 using Tapatalk
Click to expand...
Click to collapse
Tried that, tried flashing another roms, tried KDZ, tried multiple stock roms....nothing works.... It says it's charging without cable being connected.
stuck with cm9
For those you stuck and cannot flash back to stock ROM. enter to CWM, and leave it there. Connect to PC and flash with EMERGENCY mode (not DIAG)
Works perfectly, tested in Windows 8
Thanks!
Unable to download kdz
Maybe I'm doing something wrong, but when I try click on the link for the kdz I'm looking for it takes me to a tny.cz page and nothing else happens.
What am I missing?
petriedave said:
Maybe I'm doing something wrong, but when I try click on the link for the kdz I'm looking for it takes me to a tny.cz page and nothing else happens.
What am I missing?
Click to expand...
Click to collapse
Nothing wrong with the links. I''ve checked them several times.

I bricked my G2 D802

I edited the build.prop and it got bricked then when i plugged the phone in to the computer it says drive need to be formatted and a bunch of disks gets shown up.After that i tried flashing the .kdz firmware and it got stuck @49% and then it gets stopped due to an error.After trying some flashing now my G2 is hard bricked.Now in download mode when i try to flash the .kdz file it didn't shows the COMXX thing..I am really worried about this.
now i cant flash .kdz firmware using downloaded mode it always gets stopped due to an error.I can boot in to recovery mode(i can reset my mobile)but no use plz help me i am a noob... when i turn on the phone the lg logo appears and disappears then a black screen and the led is also lightning.
Sorry for my bad english
U can either try to push a rom into ur mobile via adb or USB otg and flash it
Sent from my LG-D802 using XDA Premium 4 mobile app
jaidev.s said:
U can either try to push a rom into ur mobile via adb or USB otg and flash it
Sent from my LG-D802 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
but it is not possible for me.there is no other option except reset then how it is possible:crying:
PRASOON.R said:
but it is not possible for me.there is no other option except reset then how it is possible:crying:
Click to expand...
Click to collapse
This other guy is in the same boat as you.
Follow this thread, you might find answers here LINK
PRASOON.R said:
I edited the build.prop and it got bricked then when i plugged the phone in to the computer it says drive need to be formatted and a bunch of disks gets shown up.After that i tried flashing the .kdz firmware and it got stuck @49% and then it gets stopped due to an error.After trying some flashing now my G2 is hard bricked.Now in download mode when i try to flash the .kdz file it didn't shows the COMXX thing..I am really worried about this.
now i cant flash .kdz firmware using downloaded mode it always gets stopped due to an error.I can boot in to recovery mode(i can reset my mobile)but no use plz help me i am a noob... when i turn on the phone the lg logo appears and disappears then a black screen and the led is also lightning.
Sorry for my bad english
Click to expand...
Click to collapse
Dear u haven't hard bricked ur phone. U just soft bricked it, don't panic it's just a part of learning process. Follow the offline method,enter into download mode by plugging the phone while pressing volume up, install the tot file everything will be all right.
I personally soft bricked it as same as you and recovered using offline method or u can recover ur phone using lg mobile support tool it will install custom OS back.
ingoljosh said:
This other guy is in the same boat as you.
Follow this thread, you might find answers here LINK
Click to expand...
Click to collapse
yea.i have the same problem.
i am also getting the same error
Page_Error ºÎºÐÀÔ´Ï´Ù
¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù)
nikilsahil said:
Dear u haven't hard bricked ur phone. U just soft bricked it, don't panic it's just a part of learning process. Follow the offline method,enter into download mode by plugging the phone while pressing volume up, install the tot file everything will be all right.
I personally soft bricked it as same as you and recovered using offline method or u can recover ur phone using lg mobile support tool it will install custom OS back.
Click to expand...
Click to collapse
but i am getting some errors while using LG Flash tool(using .tot file) it is saying wrong .dll file but the .dll is right
PRASOON.R said:
but i am getting some errors while using LG Flash tool(using .tot file) it is saying wrong .dll file but the .dll is right
Click to expand...
Click to collapse
there is a 2ndary dll file you can download if having issues. Follow directions exactly here
If you can still access download mode you have not HARD BRICKED
**************EDITED at 10:53am Pacific Standard Time**************
Here is the link for the 2nd DLL if having trouble.
Straight Download
ingoljosh said:
there is a 2ndary dll file you can download if having issues. Follow directions exactly here
If you can still access download mode you have not HARD BRICKED
**************EDITED at 10:53am Pacific Standard Time**************
Here is the link for the 2nd DLL if having trouble.
Straight Download
Click to expand...
Click to collapse
k. i will try...
PRASOON.R said:
k. i will try...
Click to expand...
Click to collapse
ok. let us know what happens.
nikilsahil said:
I personally soft bricked it as same as you and recovered using offline method or u can recover ur phone using lg mobile support tool it will install custom OS back.
Click to expand...
Click to collapse
I think LG tool only allows Stock OS not custom.
ingoljosh said:
I think LG tool only allows Stock OS not custom.
Click to expand...
Click to collapse
Yesss....

STUCK at LG Logo, NO Download mode..Please HELP!!

hi all,
I have posted my G2 problem in another thread but was hoping more people can see it and help me...
PHONE Stuck at LG Logo after power up.
NO Download Mode,
here goes..
Believed I was conned... and this could be what happened to my LG G2 'D802':
my mobile is actually a D801 phone (motherboard) NOT D802 but loaded with D802 ROM
Phone was flashed (by me) with D802 ROM to remove error "Unfortunately, the process com.android.systemui has stopped" caused by corrupted Build.Prop system file during some editing.
touch screen error after new ROM was flashed (tried many diff roms), likely due to incompatible phone settings.
unable to flash D801 kdz since the phone was configured to 'D802', incorrect model detected while trying to flash.
managed to get a D801 TOT file that can resolved the incompatible model issue
Flash completed, phone rebooted..STUCKED at LG LOGO!
pressed Vol+ and USB cable, cannot enter download mode...stucked..
Factory reset using hardware keys, same problem..
please help ! any suggestion/s would be greatly appreciated!! thank you!!
TEDET123 said:
hi all,
I have posted my G2 problem in another thread but was hoping more people can see it and help me...
PHONE Stuck at LG Logo after power up.
NO Download Mode,
here goes..
Believed I was conned... and this could be what happened to my LG G2 'D802':
my mobile is actually a D801 phone (motherboard) NOT D802 but loaded with D802 ROM
Phone was flashed (by me) with D802 ROM to remove error "Unfortunately, the process com.android.systemui has stopped" caused by corrupted Build.Prop system file during some editing.
touch screen error after new ROM was flashed (tried many diff roms), likely due to incompatible phone settings.
unable to flash D801 kdz since the phone was configured to 'D802', incorrect model detected while trying to flash.
managed to get a D801 TOT file that can resolved the incompatible model issue
Flash completed, phone rebooted..STUCKED at LG LOGO!
pressed Vol+ and USB cable, cannot enter download mode...stucked..
Factory reset using hardware keys, same problem..
please help ! any suggestion/s would be greatly appreciated!! thank you!!
Click to expand...
Click to collapse
use flashtool with another *dll
His download mode is not functional.
When in factory reset - connect to pc(does it throw errors or add a new device?)
If yes..then - read this
If no then still read it.
bender_007 said:
His download mode is not functional.
When in factory reset - connect to pc(does it throw errors or add a new device?)
If yes..then - read this
If no then still read it.
Click to expand...
Click to collapse
thanks for replying guys..appreciate it!
yes..download mode is not functional.
When connect to pc at 'Factory hard reset mode' screen (vol- and pwr pressed, letgo and pressed)..nothing happens on either PC or Mobile..
After Hard reset, phone continue stuck at LG LOGO.. PC detected mobile as "LGE AndroidNet USB Serial Port (COM41)", see attached.
I have tried the method in the link above but the PC seems cannot detect phone during cmd "ls /dev/sd*" and "gdisk -l /dev/sdb" .
someone please help..
TEDET123 said:
someone please help..
Click to expand...
Click to collapse
Hey,
I'm currently having some issue too but not the same it seems ..
Have you tried this: http://forum.xda-developers.com/showthread.php?t=2656275 ?
Hope it will help!
shark_max said:
Hey,
I'm currently have some issue too but not the same it seems ..
Have you tried this: http://forum.xda-developers.com/showthread.php?t=2656275 ?
Hope it will help!
Click to expand...
Click to collapse
hey thanks!
i have tried the method in the link but mobile cannot get into download mode...:crying::crying:
TEDET123 said:
hey thanks!
i have tried the method in the link but mobile cannot get into download mode...:crying::crying:
Click to expand...
Click to collapse
But you did in one of your screenshot ...
Anyway, when you let the phone continue to boot, what happend? lot of force close?
Edit : Antoher solution : have you tried to use the official LG Support tool? I did once when my device was completely f****ed up and it restored it by itself!
TEDET123 said:
hey thanks!
i have tried the method in the link but mobile cannot get into download mode...:crying::crying:
Click to expand...
Click to collapse
Just plug your cable to usb. Turn off phone and inmediately hold the button up and ull be in download mode.
Or If U have 801 rom try to root your phone and do recovery as 801 phone, after flash 802 rom !
shark_max said:
But you did in one of your screenshot ...
Anyway, when you let the phone continue to boot, what happend? lot of force close?
Edit : Antoher solution : have you tried to use the official LG Support tool? I did once when my device was completely f****ed up and it restored it by itself!
Click to expand...
Click to collapse
the screenshot stays forever (trying to get into download mode) and did not enter the actual download screen.
if continue to boot, the phone will just hang at LG Logo.
shark_max said:
But you did in one of your screenshot ...
Anyway, when you let the phone continue to boot, what happend? lot of force close?
Edit : Antoher solution : have you tried to use the official LG Support tool? I did once when my device was completely f****ed up and it restored it by itself!
Click to expand...
Click to collapse
LG Support tool was unable to detect my phone..
patriky said:
Just plug your cable to usb. Turn off phone and inmediately hold the button up and ull be in download mode.
Or If U have 801 rom try to root your phone and do recovery as 801 phone, after flash 802 rom !
Click to expand...
Click to collapse
I did this but phone just stays at the 2nd screenshot...
before it was bricked, I have no problem get it into download mode with vol+ and usb cable.
TEDET123 said:
LG Support tool was unable to detect my phone..
Click to expand...
Click to collapse
Wait so what can you do? Hard reset? Download mode? Nothing?
Can you plug your phone and check that your phone is not detected in device manager?
All the drivers are installed?
Same issue
I am having the same exact issue as TEDET123. !!! installed ubunto in one of my PC, tried the same procedure as explain at
http://forum.xda-developers.com/showthread.php?t=2582142&highlight=even+disconnect+lg+phone.
the ubuntu doesn't show any SDB !! need help!!! went to the famous lg software guy in my town. He said MMC chip needs to be replaced ! I knw he doesn;'t have its solution and trying to demotivate me thats it! I knw there must be a solution to this issue!
I would try to force the phone into qhsusb mode then flash only laf.img,aboot.img and boot.img
In qhsub mode you should be able to see the SDB partition
http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
FaseehUllah said:
I am having the same exact issue as TEDET123. !!! installed ubunto in one of my PC, tried the same procedure as explain at
http://forum.xda-developers.com/showthread.php?t=2582142&highlight=even+disconnect+lg+phone.
the ubuntu doesn't show any SDB !! need help!!! went to the famous lg software guy in my town. He said MMC chip needs to be replaced ! I knw he doesn;'t have its solution and trying to demotivate me thats it! I knw there must be a solution to this issue!
Click to expand...
Click to collapse
Same problem.
Same problem
now can i go back to fast boot mode?
someone please help..
Same problem, please helpp
Same Problem ...... flashing unknown rom and now stuck on LG logo and not entering to download mode please help !! Experts ??

LG G2 - D802 - Bricked... need urgent help...

Hi,
I was installing MIUI v6, it did got install but many things were not working.
So i did the stupid thing and changed the kernal through twrp.
And NOW:
My phone is bricked, it stays on the LG logo.
I tried to go into downloading mode but it does not detect the usb to computer connection.
So I am unable to to use LG tool to install stock rom kdz.
because it does not detects the usb in downloading mode....
please help me around this problem.
my warrenty is over too.
qam47 said:
Hi,
I was installing MIUI v6, it did got install but many things were not working.
So i did the stupid thing and changed the kernal through twrp.
And NOW:
My phone is bricked, it stays on the LG logo.
I tried to go into downloading mode but it does not detect the usb to computer connection.
So I am unable to to use LG tool to install stock rom kdz.
because it does not detects the usb in downloading mode....
please help me around this problem.
my warrenty is over too.
Click to expand...
Click to collapse
I got the same problem here after using MIUI and trying to get out of it.
Stuck in bootloop, no recovery, download mode stuck at first screen, phone not being detected by pc and no flashing led anymore.
Anyone help us please, my phone is out of warranty too
http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
everything you need is here.
check again if you don't have USB connection of any kind. If you do have something in the PC responding to the G2 being connected, it isn't a hard brick and you can fix it with this: http://forum.xda-developers.com/showthread.php?t=2582142
Otherwise you just have to do this short the caps thing. Be careful and renember that this is always a better option than staying with a bricked device. You can also try to give the phone to some experienced repaired and tell him about the method and how will it cost.
Rayaxe said:
http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
everything you need is here.
check again if you don't have USB connection of any kind. If you do have something in the PC responding to the G2 being connected, it isn't a hard brick and you can fix it with this: http://forum.xda-developers.com/showthread.php?t=2582142
Otherwise you just have to do this short the caps thing. Be careful and renember that this is always a better option than staying with a bricked device. You can also try to give the phone to some experienced repaired and tell him about the method and how will it cost.
Click to expand...
Click to collapse
Thanks for the reply.
But it says:
http://forum.xda-developers.com/showthread.php?t=2582142
VERY IMPORTANT!!!!!!!
You must use the img files that correspond to the ROM you have installed before getting the problem to avoid breaking your phone. The link above is for 10b_EUR_16G firmware version. So don't use those files if your firmware version was not that one. Instead you should look for img files corresponding to the current version installed in your phone. If you don't know what version you've installed then don't use this method because you will break your phone.
Click to expand...
Click to collapse
and i dont know which one to download.
Here is the link to Miui 6, I did install before crashing
http://forum.xda-developers.com/lg-g2/development/kk-miui-6-lg-g2-variants-based-stock-lg-t3106569.
...
You have to know which model your phone is.
Do you know your phone's IMEI? http://www.lgkdz.com/ Go here and it will get the file you need to download via your IMEI (even though it is risky to put the IMEI in the internet).
Otherwise you can just search for your kdz file by knowing what model you have and what stock rom you had last time. You can always revert to that.
Mine is D802 32GB, has V30b-EUR software. That is enough for me to get the correct kdz file even by searching in the links provided in the tutorials I mentioned in my last message
Rayaxe said:
You have to know which model your phone is.
Do you know your phone's IMEI? http://www.lgkdz.com/ Go here and it will get the file you need to download via your IMEI (even though it is risky to put the IMEI in the internet).
Otherwise you can just search for your kdz file by knowing what model you have and what stock rom you had last time. You can always revert to that.
Mine is D802 32GB, has V30b-EUR software. That is enough for me to get the correct kdz file even by searching in the links provided in the tutorials I mentioned in my last message
Click to expand...
Click to collapse
My phone is bootlooping and recognized as "LGE Android MTP Device" only,
I can't back to stock using kdz, can't ADB sideload
Any ideas how to solve it?
GoPogoOreo! said:
My phone is bootlooping and recognized as "LGE Android MTP Device" only,
I can't back to stock using kdz, can't ADB sideload
Any ideas how to solve it?
Click to expand...
Click to collapse
Do you have access to download mode? Since your PC recognizes the phone as MTP Device, I'm not sure but I think that's only possible if you have /system/ working since the other partitions don't have MTP support originally.
If you have that, go there: http://forum.xda-developers.com/showthread.php?t=2432476
Flash with the tot method and you should be good to go.
But wait for someone who can confirm what I'm saying since I'm no expert.
Rayaxe said:
Do you have access to download mode? Since your PC recognizes the phone as MTP Device, I'm not sure but I think that's only possible if you have /system/ working since the other partitions don't have MTP support originally.
If you have that, go there: http://forum.xda-developers.com/showthread.php?t=2432476
Flash with the tot method and you should be good to go.
But wait for someone who can confirm what I'm saying since I'm no expert.
Click to expand...
Click to collapse
I can access download mode, but when i connect my phone (on download mode) to my PC nothing happened, and my phone is not detected even as MTP device
GoPogoOreo! said:
I can access download mode, but when i connect my phone (on download mode) to my PC nothing happened, and my phone is not detected even as MTP device
Click to expand...
Click to collapse
samething with me please help

URGENT HELP!! Not able to boot my LG G2

Hello everyone,
I have a rooted LG G2 D802. I have very less technical knowledge about stuff.
Today i had done following things:
1- Downloaded Autorec
2- Installed TWRP recovery through Autorec
3- Installed Flashify
4- Rebooted to recovery
After this phone turned off and is completely died. It is showing no sign of life. Guys please help me i cannot afford a new phone now so i need this phone ver badly.
Thanks in advance.
Try to use srktool to unbrick you phone.
http://forum.xda-developers.com/lg-g2/development/tools-srk-tool-useful-toos-lg-root-twrp-t3079076
dumbrose said:
Hello everyone,
I have a rooted LG G2 D802. I have very less technical knowledge about stuff.
Today i had done following things:
1- Downloaded Autorec
2- Installed TWRP recovery through Autorec
3- Installed Flashify
4- Rebooted to recovery
After this phone turned off and is completely died. It is showing no sign of life. Guys please help me i cannot afford a new phone now so i need this phone ver badly.
Thanks in advance.
Click to expand...
Click to collapse
If you can go download mode there'll be no problem. Use flash tot method.
Hiyaslalabs said:
If you can go download mode there'll be no problem. Use flash tot method.
Click to expand...
Click to collapse
No man i cant even go to download mode. The phone screen turns on when i connect it to laptop. after some time it starts turning on-off rapidly. and rarely red led is also flashed.
Ok so what you are going to do is to press the volume up button and connect your usb cable. After that you should be in download mode. Follow the instructions of http://forum.xda-developers.com/showthread.php?t=2432476 and i suggest you would choose the kdz method. Good luck
dumbrose said:
No man i cant even go to download mode. The phone screen turns on when i connect it to laptop. after some time it starts turning on-off rapidly. and rarely red led is also flashed.
Click to expand...
Click to collapse
Please follow the procedures carefully on the flash kdz/tot method if nothing happens then seek help here.
Hiyaslalabs said:
Please follow the procedures carefully on the flash kdz/tot method if nothing happens then seek help here.
Click to expand...
Click to collapse
Thank you so much for being there to help.
Sorry but i cannot het into download mode.. Through study on other xda forums i can find you that i have
"QUALCOMM HS-USB 9006 " problem.
dumbrose said:
Thank you so much for being there to help.
Sorry but i cannot het into download mode.. Through study on other xda forums i can find you that i have
"QUALCOMM HS-USB 9006 " problem.
Click to expand...
Click to collapse
Holding volume up and power doesn't go download mode? You can try the SRK tool just download it. If it doesn't work you need the boarddiag method just search it here. I hope it'll be fixed soon.
I killed my 802 flashing CM13 onto it.
LG logo would flash up, no download mode but I could boot into recovery. However the phone wasnt seen in windows and did the multiple partitions thing a few have mentioned.
SRKtool fixed it, theres also a guide on youtube on how to use the software.
nine0nine said:
I killed my 802 flashing CM13 onto it.
LG logo would flash up, no download mode but I could boot into recovery. However the phone wasnt seen in windows and did the multiple partitions thing a few have mentioned.
SRKtool fixed it, theres also a guide on youtube on how to use the software.
Click to expand...
Click to collapse
can you share the link to the guide please? i am currently downloading srk tool
Hello everyone. i want to confirm that SRK Tool saved me. now my phone is back to normal. I didn even needed to flash the stock firmware.
http://forum.xda-developers.com/lg-g2/development/tools-srk-tool-useful-toos-lg-root-twrp-t3079076
Thanks to xda community!

Categories

Resources