Samsung galaxy s4 i337 NC1 room help - AT&T Samsung Galaxy S 4 Q&A, Help & Troubleshootin

Ok so I have s4 i337 att version on nc1 build. I'm rooted and have safestrap 3.72 boot loader. My problem is that I can't find a damn rom that will work. Maybe I'm doing it wrong out don't have the right rom. So far I've tried the cyenogenmod and liquidsmooth and when I do the steps then reboot, nothing happens it reboots super slow. So if someone could point me in the right direction that will be cool. Also once I do this how could I get all my apps back to what they were and what willi lose when I flash a new room I.e. contacts, apps, pictures.?

tshaulis said:
Ok so I have s4 i337 att version on nc1 build. I'm rooted and have safestrap 3.72 boot loader. My problem is that I can't find a damn rom that will work. Maybe I'm doing it wrong out don't have the right rom. So far I've tried the cyenogenmod and liquidsmooth and when I do the steps then reboot, nothing happens it reboots super slow. So if someone could point me in the right direction that will be cool. Also once I do this how could I get all my apps back to what they were and what willi lose when I flash a new room I.e. contacts, apps, pictures.?
Click to expand...
Click to collapse
You have a locked bootloader which prevents the recovery and stock kernel from being replaced. That means that AOSP/AOKP ROMS will not work.
Only TouchWiz based ROMs work. We also have a working Google Play Edition ROM. All information about the phone is available in All Things AT&T thread.
Your contacts would be backed up by Google if you have set it to. Your data in the internal (pictures/video/music) etc is not lost in typical cases. It would be wiped out in case of Odin flash to stock. Your data in external storage is never touched.
Your apps are also backed up by google. If the ROM changes build.prop resulting in phone type being seen by google as being different, then apps would have to be manually installed or restored from backup. People have used Titanium Backup to backup and restore apps. You could backup all apps but I would recommend restoring apps selectively. Also, be careful restoring apps data. There could be incompatibilities resulting in force closes.

jmjoyas said:
You have a locked bootloader which prevents the recovery and stock kernel from being replaced. That means that AOSP/AOKP ROMS will not work.
Only TouchWiz based ROMs work. We also have a working Google Play Edition ROM. All information about the phone is available in All Things AT&T thread.
Your contacts would be backed up by Google if you have set it to. Your data in the internal (pictures/video/music) etc is not lost in typical cases. It would be wiped out in case of Odin flash to stock. Your data in external storage is never touched.
Your apps are also backed up by google. If the ROM changes build.prop resulting in phone type being seen by google as being different, then apps would have to be manually installed or restored from backup. People have used Titanium Backup to backup and restore apps. You could backup all apps but I would recommend restoring apps selectively. Also, be careful restoring apps data. There could be incompatibilities resulting in force closes.
Click to expand...
Click to collapse
Ok thank you very much. That is a lot of help and I will check out the link you provided. So why is my bout loader locked is it because I updated to far or specific model apply. Also what's the deal with nc1, seemed there's not much info about it and not very popular among the modders.

tshaulis said:
Ok thank you very much. That is a lot of help and I will check out the link you provided. So why is my bout loader locked is it because I updated to far or specific model apply. Also what's the deal with nc1, seemed there's not much info about it and not very popular among the modders.
Click to expand...
Click to collapse
The bootloader on ATT S4 has always been locked. In the initial 2 releases (MDB and MDL), there was a bug that was exploited using Loki which allowed for custom recovery and kernel. That loophole has been fixed since MF3 release.
NC1 is the latest firmware. There are probably none modding the ATT firmware. All our ROMs are mostly based on the international variant of S4.
Read the thread. We do have a long list of ROMs that work on our phone.

jmjoyas said:
Read the thread. We do have a long list of ROMs that work on our phone.
Click to expand...
Click to collapse
Ok thank you. I've been looking at it and I was wondering would any of the rooms work even though they say i9505 I have the i337 or does that not matter?

tshaulis said:
Ok thank you. I've been looking at it and I was wondering would any of the rooms work even though they say i9505 I have the i337 or does that not matter?
Click to expand...
Click to collapse
All the ROMs listed in that thread are guaranteed to work. I myself have tested many of them.

jmjoyas said:
All the ROMs listed in that thread are guaranteed to work. I myself have tested many of them.
Click to expand...
Click to collapse
Ok cool I'm gonna test out hyperdrive that one seems pretty cool. So for future reference on roms when I look for them what should I keep in mind. With my att nc1 i337 phone.

tshaulis said:
Ok cool I'm gonna test out hyperdrive that one seems pretty cool. So for future reference on roms when I look for them what should I keep in mind. With my att nc1 i337 phone.
Click to expand...
Click to collapse
Subscribe to the All Things AT&T thread. It gets updated with all the latest info.

Related

[Q] Noob needing help updating and backing up

Hi all...sorry if this is very noob but hope someone can help me out...
i got my galaxy s4 for att and its been great so far...i did root it and got rid of all the junk stuff on the phone which was nice to do... but a little issue now..there is an OTA update and its trying to apply it by rebooting but it goes to my console screen i guess and i know even if it applies it it would get rid of root.... is there a way to apply this without having to reinstall all my emails (5 emails) and my apps and keep the root ability on it? I would love to get the feature to send apps to my SD thats the only reason i really want it.
again im sorry if this is very noobish to some of u but would like a nice guide if possible how to do it.
Thanks in advance
What device? Thats important, and DO NOT let it do the update. if you are rooted, you could freeze the samsung updater.
I would get off stock and flash a custom rom.
TheAxman said:
What device? Thats important, and DO NOT let it do the update. if you are rooted, you could freeze the samsung updater.
I would get off stock and flash a custom rom.
Click to expand...
Click to collapse
im on a samsung galaxy s4 as mentioned above....which rom would u suggest that is not bugged? i want all the features to work just as it stock would..and the battery life now is great.
thanks
nxtstep said:
im on a samsung galaxy s4 as mentioned above....which rom would u suggest that is not bugged? i want all the features to work just as it stock would..and the battery life now is great.
thanks
Click to expand...
Click to collapse
hehe I know you stated galaxy s4, but I needed to make sure, US version right?
Use my rom, mine is totally stock, with a few modifications, and FAST!
or you can go any TW rom.
here is mine..
[ROM] ViSiON-X v1.0|AROMA|4.2.2|MGA|TW|[08-03]
http://forum.xda-developers.com/showthread.php?t=2391142
then you will not have to worry about an update, until someone finds a patch for the update...
TheAxman said:
hehe I know you stated galaxy s4, but I needed to make sure, US version right?
Use my rom, mine is totally stock, with a few modifications, and FAST!
or you can go any TW rom.
here is mine..
[ROM] ViSiON-X v1.0|AROMA|4.2.2|MGA|TW|[08-03]
http://forum.xda-developers.com/showthread.php?t=2391142
then you will not have to worry about an update, until someone finds a patch for the update...
Click to expand...
Click to collapse
is there anything running 4.3??? and yes its US version
nxtstep said:
is there anything running 4.3??? and yes its US version
Click to expand...
Click to collapse
No 4.3 just yet. Google only.
Questions and help issues go in Q&A and Help section
Thread moved
FNM
I am using KANGABEAN Rom 4.2.2 v all Samsung goodies works plus better performance and some kool tweaks
http://forum.xda-developers.com/showthread.php?t=2349077
Infamous S4 is great rom as well I go back and forth between those 2 All Samsung goodies works plus some kool modes.
http://forum.xda-developers.com/showthread.php?t=2304792
Try either one you will love it!
Backup and Restore
maxshah912 said:
I am using KANGABEAN Rom 4.2.2 v all Samsung goodies works plus better performance and some kool tweaks
http://forum.xda-developers.com/showthread.php?t=2349077
Infamous S4 is great rom as well I go back and forth between those 2 All Samsung goodies works plus some kool modes.
http://forum.xda-developers.com/showthread.php?t=2304792
Try either one you will love it!
Click to expand...
Click to collapse
I use Infamous S4 as well, I love it. It's pretty stock feeling.
When it comes to the backing up part, I suggest Titanium Backup. Get the pro version and you can batch install all of your apps from a backup, otherwise you have to do it one by one. It also saves all app data and system data and accounts, so you can do a full wipe when installing an update or a new ROM (always a good idea,) then just let it completely restore the phone from a backup. You can use it to back-up everything, except for the home-screen layout (android limitation apparently.) Plus you can backup right to the phone if you have space so you don't have to wory about using the computer. I recomment getting a microSD card for 10 bucks at Staples and backing up to that. When you're restoring, make sure that you check what you're restoring. Most of the stuff in red are system apps that don't need to be restored (as newer or the same versions may already be installed from the update.)
For restoring root priviledges, CWM and TWRP custom rrecoveries have a tool for this.

Why no Clean loki flashable official 4.3 ROMs?

I still have a MDL bootloader and have been running clean GE ROMs since they came out. I really want to try out AT&T's latest MK2 4.3 official ROM, but it seems no one has just released a clean flashable in CWM rom like I have seen in past releases.
Is it because most people have to use Safestrap now with the newer bootloaders and have no use for flashable MK2 ROMs anymore?
I don't want to upgrade my bootloader by just putting on MK2 the normal way, I want to keep the ability to flash ROMS, but really want to try out a stock MK2 so I can try out the Samsung stuff again.
Sure there are a ton of MK2 ROMs in the forums here, but they are heavily modded with stuff I really don't want. I just want a clean ROM without anyone's MODs except for the usual of removal of the protections that would prevent me from reflashing a different ROM in the future.
Can anyone please point me in the right direction?
chocodough said:
I still have a MDL bootloader and have been running clean GE ROMs since they came out. I really want to try out AT&T's latest MK2 4.3 official ROM, but it seems no one has just released a clean flashable in CWM rom like I have seen in past releases.
Is it because most people have to use Safestrap now with the newer bootloaders and have no use for flashable MK2 ROMs anymore?
I don't want to upgrade my bootloader by just putting on MK2 the normal way, I want to keep the ability to flash ROMS, but really want to try out a stock MK2 so I can try out the Samsung stuff again.
Sure there are a ton of MK2 ROMs in the forums here, but they are heavily modded with stuff I really don't want. I just want a clean ROM without anyone's MODs except for the usual of removal of the protections that would prevent me from reflashing a different ROM in the future.
Can anyone please point me in the right direction?
Click to expand...
Click to collapse
It's mostly because we already got a root method, so nobody's seen a purpose in putting together a flashable one to experiment on. I'm sure it can be done using the same method which the MF3 stock ROM was made, but someone just has to be willing to flash back to completely stock and run some terminal commands.
EDIT: Found a system dump, just nobody has compiled it into a flashable zip. http://forum.xda-developers.com/showpost.php?p=47943805&postcount=760
Maybe someone could look at it.
EDIT2: StockUp has a rebloat addon if you want AT&T apps, and comes with all the normal Samsung things. It's probably your best bet. http://forum.xda-developers.com/showthread.php?t=2498244
DeadlySin9 said:
It's mostly because we already got a root method, so nobody's seen a purpose in putting together a flashable one to experiment on. I'm sure it can be done using the same method which the MF3 stock ROM was made, but someone just has to be willing to flash back to completely stock and run some terminal commands.
EDIT: Found a system dump, just nobody has compiled it into a flashable zip. http://forum.xda-developers.com/showpost.php?p=47943805&postcount=760
Maybe someone could look at it.
EDIT2: StockUp has a rebloat addon if you want AT&T apps, and comes with all the normal Samsung things. It's probably your best bet. http://forum.xda-developers.com/showthread.php?t=2498244
Click to expand...
Click to collapse
Hopefully a DEV has their original laying around somewhere.
Of course I would prefer to have the KNOX stuff removed. I'm not sure what files to remove to do it myself.
I've seen some ROMs similar to what I am looking for in the Tmobile section here, but they still have stuff like modded or replaced kernels and of course all the Tmobile stuff in them. Would be nice to have the actual AT&T version without KNOX.
Hopefully that wouldn't be asking too much.
DeadlySin9 said:
It's mostly because we already got a root method, so nobody's seen a purpose in putting together a flashable one to experiment on. I'm sure it can be done using the same method which the MF3 stock ROM was made, but someone just has to be willing to flash back to completely stock and run some terminal commands.
EDIT: Found a system dump, just nobody has compiled it into a flashable zip. http://forum.xda-developers.com/showpost.php?p=47943805&postcount=760
Maybe someone could look at it.
EDIT2: StockUp has a rebloat addon if you want AT&T apps, and comes with all the normal Samsung things. It's probably your best bet. http://forum.xda-developers.com/showthread.php?t=2498244
Click to expand...
Click to collapse
Ok thanks, I'll look into that.
chocodough said:
Hopefully a DEV has their original laying around somewhere.
Of course I would prefer to have the KNOX stuff removed. I'm not sure what files to remove to do it myself.
I've seen some ROMs similar to what I am looking for in the Tmobile section here, but they still have stuff like modded or replaced kernels and of course all the Tmobile stuff in them. Would be nice to have the actual AT&T version without KNOX.
Hopefully that wouldn't be asking too much.
Click to expand...
Click to collapse
StockUp has KNOX removed and is based off the AT&T version, and like i said has that rebloat zip with AT&T apps. All you have to do from there is get a 4.3 kernel
This one? have you read it?
MF3 system and boot images, no bootloader so you are safe. Need custom kernels, due to mf3 rom expecting mf3 bootloader and kernel.
http://forum.xda-developers.com/showthread.php?t=2378946
Personal suggestion, don't try the MF3 and stay with GE, update it to 4.3 or 4.4 if you want, because you won't be losing anything going touchwiz and instead will be adding a ton of crap. Even after debloating you will still end up with a ton of crap.
ps. lovely edit system the forum has...
chocodough said:
I still have a MDL bootloader and have been running clean GE ROMs since they came out. I really want to try out AT&T's latest MK2 4.3 official ROM, but it seems no one has just released a clean flashable in CWM rom like I have seen in past releases.
Is it because most people have to use Safestrap now with the newer bootloaders and have no use for flashable MK2 ROMs anymore?
I don't want to upgrade my bootloader by just putting on MK2 the normal way, I want to keep the ability to flash ROMS, but really want to try out a stock MK2 so I can try out the Samsung stuff again.
Sure there are a ton of MK2 ROMs in the forums here, but they are heavily modded with stuff I really don't want. I just want a clean ROM without anyone's MODs except for the usual of removal of the protections that would prevent me from reflashing a different ROM in the future.
Can anyone please point me in the right direction?
Click to expand...
Click to collapse
Upgrade bootloader? It seems like a downgrade if it restricts what you can flash. Have you tried the international roms? Sure it won't have the at&t stuff which most people don't want but it'll have the samsung stuff you seem to want. Make sure to flash lokidoki after installing international rom or install an at&t kernal.
gb.sn said:
This one? have you read it?
MF3 system and boot images, no bootloader so you are safe. Need custom kernels, due to mf3 rom expecting mf3 bootloader and kernel.
http://forum.xda-developers.com/showthread.php?t=2378946
Personal suggestion, don't try the MF3 and stay with GE, update it to 4.3 or 4.4 if you want, because you won't be losing anything going touchwiz and instead will be adding a ton of crap. Even after debloating you will still end up with a ton of crap.
ps. lovely edit system the forum has...
Click to expand...
Click to collapse
He was looking for MK2, not MF3.
crash822 said:
Upgrade bootloader? It seems like a downgrade if it restricts what you can flash. Have you tried the international roms? Sure it won't have the at&t stuff which most people don't want but it'll have the samsung stuff you seem to want. Make sure to flash lokidoki after installing international rom or install an at&t kernal.
Click to expand...
Click to collapse
He said he doesn't want to upgrade bootloader, that's why he's looking for a loki 4.3 stock.

Flash ROM & some crazy nintendo graphics

Hi guys, I'm wondering if anyone can shed some light on a few things for me.
I have an ATT SGH i-337 MK2 with SafeStrap 3.71
Today I tried to flash PAC ROM and Dirty Unicorn into ROM Slot-1, and upon reboot when the ROM's logo should appear the whole screen just looked like when a nintendo cartridge isn't working. It was just a few crazy colors with some blocks and lines here and there.
Then I tried AOKP with it's Loki'd Kernel being part of the ROM. The nintendo screen came back again, but then the AOKP logo popped up clear as day for a second. Then went back to the lines and colors.
So could this be a problem with Safestrap compatibility? If so, how can I uninstall it? (I did read the dev's thread, and it just says use .APK and IDK what that means)
Or could it be that I also need to use Loki Doki with the other two? (Didn't see anything about that in PAC or DU threads)
Thanks!
Same issues apon using The Samsung Galaxy S4 for Verizon (jfltevzw) Build MK2 rooted using vRoot (English) and using safestrap. if needed I can upload the safestrap apk or version. If I install any type of AOSP ROM the boot logo is either missng or baby blue with wierd static lines. AOKP is the only AOSP ROM that eventually boots (with static boot logo) but no wireless works, and this is the same wether MK2 and/or MJ7 modules are installed or not. the only rom I can successfuly install and use daily that has no bootloader based issues is Hyperdrive ROM For jfltevzw & jflteatt. Any info would be much apreciated!
Sent from my SCH-I545 using xda app-developers app
^ Interesting. I didn't expect anyone else to have this issue. I never read about it before. I really feel like it has something to do with SafeStrap.
Heath Cliff said:
Hi guys, I'm wondering if anyone can shed some light on a few things for me.
I have an ATT SGH i-337 MK2 with SafeStrap 3.71
Today I tried to flash PAC ROM and Dirty Unicorn into ROM Slot-1, and upon reboot when the ROM's logo should appear the whole screen just looked like when a nintendo cartridge isn't working. It was just a few crazy colors with some blocks and lines here and there.
Then I tried AOKP with it's Loki'd Kernel being part of the ROM. The nintendo screen came back again, but then the AOKP logo popped up clear as day for a second. Then went back to the lines and colors.
So could this be a problem with Safestrap compatibility? If so, how can I uninstall it? (I did read the dev's thread, and it just says use .APK and IDK what that means)
Or could it be that I also need to use Loki Doki with the other two? (Didn't see anything about that in PAC or DU threads)
Thanks!
Click to expand...
Click to collapse
If you would have read 1st, then you would know that you can NOT flash any non TW rom on MK2. This is stated over & over on XDA. Safestrap is NOT the problem it is a Godsend from Hashcode for us to be able to flash custom roms onto our locked boot loader devices. Please read before flashing, bricking & then bashing the developers. Follow the directions posted on how to restore your phone, or better yet make a trip to Best Buy & they'll do it for you. Good Luck.
REEEEEEAAAAADDDD!!!!
It's been very well documented that AOSP does not work with safestrap. Neither does loki. There currently is no way/fix to flash AOSP.
So
1. No AOSP or GPE
2. No loki
3. No flashing custom kernels
Sent from my GT-I9505 using Tapatalk
John The Rhino said:
If you would have read 1st, then you would know that you can NOT flash any non TW rom on MK2. This is stated over & over on XDA. Safestrap is NOT the problem it is a Godsend from Hashcode for us to be able to flash custom roms onto our locked boot loader devices. Please read before flashing, bricking & then bashing the developers. Follow the directions posted on how to restore your phone, or better yet make a trip to Best Buy & they'll do it for you. Good Luck.
Click to expand...
Click to collapse
I did read first. I've been reading this forum for quite a while actually. But there is so much information it's hard to keep it all straight. This ATT stuff is a lot different then my VZW Razr was. That phone was just flash and forget. There are so many different ROM's for this phone now that are 4.3 or KitKat I guess I just didn't realize that, that Android version came with the ROM and was originally something more mod-able stock.
Any way I wasn't bashing SS or Hashcode. I clearly said "compatibility issue" i.e. some programs just don't play well together hence the existence of compatibility mode, virtual machines, and x86 processors. So maybe you should read before bashing novice community members and making yourself look like a big asshole.
And I don't need best buy to fix anything I have a NANDroid, backup on Kies3, and Google+. Besides, I did all of this flashing I on a separate partition so the stock ROM was never altered. Thanks for absolutely nothing at all.
For anyone else that feels like they can move on with me, I would really like to try to install TWRP in place of SS. I'd appreciate any help with how to go about doing that. TIA
Heath Cliff said:
I did read first. I've been reading this forum for quite a while actually. But there is so much information it's hard to keep it all straight. This ATT stuff is a lot different then my VZW Razr was. That phone was just flash and forget. There are so many different ROM's for this phone now that are 4.3 or KitKat I guess I just didn't realize that, that Android version came with the ROM and was originally something more mod-able stock.
Any way I wasn't bashing SS or Hashcode. I clearly said "compatibility issue" i.e. some programs just don't play well together hence the existence of compatibility mode, virtual machines, and x86 processors. So maybe you should read before bashing novice community members and making yourself look like a big asshole.
And I don't need best buy to fix anything I have a NANDroid, backup on Kies3, and Google+. Besides, I did all of this flashing I on a separate partition so the stock ROM was never altered. Thanks for absolutely nothing at all.
For anyone else that feels like they can move on with me, I would really like to try to install TWRP in place of SS. I'd appreciate any help with how to go about doing that. TIA
Click to expand...
Click to collapse
Well stating Safestrap may have a compatibility issue is offensive to the developer, especially since you did not read the instructions or posts from other members who did as you. If you would follow the directions it's perfect. I have 4 different roms on my phone + stock to choose from! How cool is that? I understand the overwhelming urge to flash a rom, as I too have been flashing on my Skyrocket since the factory warranty expired last year, and flashing roms is a breeze on that device. However, this S4 is more complicated since the introduction of the KNOX & the LOCKED boot loader. These phones are expensive so unless you really want a $700.00 brick, read, read some more, then read it all again. Safestrap uses TWRP to flash the roms, but TWRP alone is not compatible with MK2 nor is CWM. If you want to flash roms on your ATT MK2 S4 Safestrap is the only way to do that at this writing.
John The Rhino said:
Well stating Safestrap may have a compatibility issue is offensive to the developer, especially since you did not read the instructions or posts from other members who did as you. If you would follow the directions it's perfect. I have 4 different roms on my phone + stock to choose from! How cool is that? I understand the overwhelming urge to flash a rom, as I too have been flashing on my Skyrocket since the factory warranty expired last year, and flashing roms is a breeze on that device. However, this S4 is more complicated since the introduction of the KNOX & the LOCKED boot loader. These phones are expensive so unless you really want a $700.00 brick, read, read some more, then read it all again. Safestrap uses TWRP to flash the roms, but TWRP alone is not compatible with MK2 nor is CWM. If you want to flash roms on your ATT MK2 S4 Safestrap is the only way to do that at this writing.
Click to expand...
Click to collapse
Okay, well thank you for that. I just see so many ATT S4's in here with other ROMs and Recoverys I thought I could get something to happen. Anyway, sorry for the poor thread and response. I appreciate the plain blunt fact that SS and the ROMs that work with it are my choices for now. And don't worry about me. The worst that I'd probably get is a soft brick and I've recovered from that before Thanks again
Heath Cliff said:
Okay, well thank you for that. I just see so many ATT S4's in here with other ROMs and Recoverys I thought I could get something to happen. Anyway, sorry for the poor thread and response. I appreciate the plain blunt fact that SS and the ROMs that work with it are my choices for now. And don't worry about me. The worst that I'd probably get is a soft brick and I've recovered from that before Thanks again
Click to expand...
Click to collapse
Hey man I totally understand. It's hard to watch all these other roms pop up for the original S4 & we can't flash them. But we no longer have to suffer with only the stock rom option since Hashcode's brilliant Safestrap was released. Once you get use to it, the ability of being able to multi-boot roms really kind of makes up for the locked boot loader. Soon though, we will have 4.4 Kit Kat & then we can start this process of getting off the stock rom all over again. Right? It could be worse, we could have I-phones. We do have a ever growing number of great custom TW based roms available to us here for our device. So try them, you'll be surprised how much better your phone performs. Glad I made sense & forgive my bluntness that's just how us Rhinos roll.

[Q] Need Help Updating AT&T S.Galaxy 4 V. 4.2.2 Rooted to Newest Version AT&T

Hey guys,
I ran a search but I don't understand half the things people are writing. I would greatly appreciate it if someone could please explain to me my options. In layman's terms, as I do not understand half the abbreviations and jargons here.
I rooted my phone over a year ago and really don't remember much about the process. I can't download important apps from Google Play anymore as they require newer versions than 4.2.2... So I'm stuck on this old version and need to update ASAP.
I have ONLY rooted the phone. I haven't done any mods or installed any ROMS. It's on stock AT&T Rom. (sometimes I wonder why I even bothered in the first place).
Can someone please point me in the right direction, I want a regular STOCK AT&T newest version, whether it stays rooted or not that's fine, but a newer version, KitKat preferably. What are my options? The simplest method would help me the most.
Things I really need backed up: My Text Messages, Voicemail, Call Logs, Whatsapp Messages etc. What is the best way to back that up? If I use Titanium Backup, and I don't have root after I update, Titanium Backup would be obsolete. So what would my other option?
Please help.
Much appreciated,
Are you sure you want to update from 4.2.2. You probably have the option to flash custom roms on your phone. There are many custom roms that that'll put 4.4.4 on your phone. Since you're rooted get terminal emulator from the play store. In it type
getprop ro.bootloader
If the last three characters are mdb or mdl you have a lot of options. I can help walk you through on how to get a custom rom on your phone.
You can update your firmware and bootloader to 4.4.4 too but you'll lose the option to flash most custom roms.
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Are you sure you want to update from 4.2.2. You probably have the option to flash custom roms on your phone. There are many custom roms that that'll put 4.4.4 on your phone. Since you're rooted get terminal emulator from the play store. In it type
getprop ro.bootloader
If the last three characters are mdb or mdl you have a lot of options. I can help walk you through on how to get a custom rom on your phone.
You can update your firmware and bootloader to 4.4.4 too but you'll lose the option to flash most custom roms.
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks bud,
I got I337UCUAMF3
I'll be honest, I haven't really messed with any custom ROMS before. I just use the stock AT&T one. But I would like to upgrade to KitKat so my phone is faster and can download / upgrade the latest Apps. Lollipop isn't out for the AT&T Samsung S4 right?
Kepela523 said:
Thanks bud,
I got I337UCUAMF3
I'll be honest, I haven't really messed with any custom ROMS before. I just use the stock AT&T one. But I would like to upgrade to KitKat so my phone is faster and can download / upgrade the latest Apps. Lollipop isn't out for the AT&T Samsung S4 right?
Click to expand...
Click to collapse
Will the phone Not download the latest 4.4.4 from the phone settings?? Settings/More/About Device/Software Update. It must be connected to WiFi to download!!! Or you can get the AT&T S4 i337 to Stock 4.4.4 NJ4 Kit Kat Scroll down this page, easy to do. http://forum.xda-developers.com/galaxy-s4-att/general/guide-odin-to-stock-updating-rooting-t2926642
tailgunner9 said:
Will the phone Not download the latest 4.4.4 from the phone settings?? Settings/More/About Device/Software Update. It must be connected to WiFi to download!!!
Click to expand...
Click to collapse
No. My phone is rooted... Is it supposed to download to 4.4? And also couldn't there be issues with that?
I found this post. So I know this is ONE option: But I'll lose my Root. Which is fine if that's my only option.
http://forum.xda-developers.com/showthread.php?t=2728462
As the OP says, I will lose ROOT. So my question would be, If I back up using Titanium Backup, how can I restore my backup if Titanium Backup works only on ROOT? This is very important.
@ jd1639 - He had mentioned there were several other options, so I will wait to hear them, and I can make a decision from there. Otherwise, I may have to fork out another $150 - $200 Bucks on a Samsung Galaxy S5 or S6. depending which suits my needs.
Many thanks for the replies!
Kepela523 said:
I found this post. So I know this is ONE option: But I'll lose my Root. Which is fine if that's my only option.
http://forum.xda-developers.com/showthread.php?t=2728462
As the OP says, I will lose ROOT. So my question would be, If I back up using Titanium Backup, how can I restore my backup if Titanium Backup works only on ROOT? This is very important.
@ jd1639 - He had mentioned there were several other options, so I will wait to hear them, and I can make a decision from there. Otherwise, I may have to fork out another $150 - $200 Bucks on a Samsung Galaxy S5 or S6. depending which suits my needs.
Many thanks for the replies!
Click to expand...
Click to collapse
You're on mf3 bootloader which doesn't really allow you to flash any roms anyway. You'd have to use safestrap.
What I'd do is flash the nb1 tar file in Odin. That'll update you to 4.4 and the device should then ota update itself from there. You will lose root, you can root it again if you want. See this http://forum.xda-developers.com/showthread.php?p=50912149
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
You're on mf3 bootloader which doesn't really allow you to flash any roms anyway. You'd have to use safestrap.
What I'd do is flash the nb1 tar file in Odin. That'll update you to 4.4 and the device should then ota update itself from there. You will lose root, you can root it again if you want. See this http://forum.xda-developers.com/showthread.php?p=50912149
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks JD, do you know if this wipes my phone? In other words, does it factory reset my phone?
Yes Flash the NB1 Stock file as he said. But you are going to loose Root and any pictures etc. stored on phone memory, so copy them to your PC or SD card. I always like to take SD card out just in case when I flash just in case it may erase it. But after you flash NB1 Stock or the Stock Root it is like a phone and have to set it up. Then it should Update to 4.4.4 itself from the settings/ Software update. Good luck. Any problem let us now.
Ah cheers,
Last question: Do you recommend the First or second option?
I337UCUFNB1_4.4_Stock_Odin_tar
I337UCUFNB1_4.4_Rootable_Stock_Odin_tar
Just a bit confusing as why he would post two separate links? I'm interpreting the first cannot be rooted ever.
Thanks again to the both of you for helping with this.
Kepela523 said:
Ah cheers,
Last question: Do you recommend the First or second option?
I337UCUFNB1_4.4_Stock_Odin_tar
I337UCUFNB1_4.4_Rootable_Stock_Odin_tar
Just a bit confusing as why he would post two separate links? I'm interpreting the first cannot be rooted ever.
Thanks again to the both of you for helping with this.
Click to expand...
Click to collapse
It's possible to root even the 4.4.4. It just gets a little trickier to do it and you have to flash modules in Odin. In the general forum see "all things at&t....." by guut13
Sent from my Nexus 5 using XDA Free mobile app
Kepela523 said:
Ah cheers,
Last question: Do you recommend the First or second option?
I337UCUFNB1_4.4_Stock_Odin_tar
I337UCUFNB1_4.4_Rootable_Stock_Odin_tar
Just a bit confusing as why he would post two separate links? I'm interpreting the first cannot be rooted ever.
Thanks again to the both of you for helping with this.
Click to expand...
Click to collapse
Yep I think you are correct. So if you want to root again use the Rootable to flash in Odin. Once you go from Jelly Bean to Kit Kat bootloaders are Locked for some .tar Same for Lollipop, they have not been able to root and unlock bootloader as yet. Just follow the steps and take your time and all will be good. Have done it several times on mine with Odin.
Hey guys, I just wanted to take the time and thank you both for the help. I finally updated today. After backing up all my data and making sure everything was safe to go. Bam! I did exactly as you suggested and had zero issues... I am now on 4.4.2
There were a couple hiccups along the way, but I figured them out without too much of a hassle.
Cheers again and best of luck to the both of you!

Trying to Upgrade to Lollipop and Keep Root - Please Point Me to the Correct Guide

I've been reading various guides here on upgrading to Lollipop and keeping root access and I'm so confused. Every time I think I have it figured out, I read something that just confuses me again.
I have an AT&T Galaxy S4 running 4.2.2, with baseband version I337UCUAMDL, which I rooted successfully using motochopper back in 2013. I haven't tried to load any custom ROMs. I'm fine with the stock ROM -- I just wanted root to remove bloatware, back-up apks, etc. OTA updates attempted to install themselves at various times but always failed. I finally froze the auto-update modules using Titanium Backup Pro so I've been stuck at 4.2.2 for a long time now. I was OK with that, but now there are more and more apps that don't work on 4.2.2 so I'd like to update to Lollipop but retain root for the same reasons. Again, I don't really care about installing custom ROMs -- unless it's a necessary step to do the upgrade and keep root.
So I was looking at this guide:
[GUIDE]Odin to Stock, Updating, Rooting, and Installing Safestrap
http://forum.xda-developers.com/galaxy-s4-att/general/guide-odin-to-stock-updating-rooting-t2926642
But it specifically says that if you have an MDL bootloader, do not use this guide.
So then I found this guide:
[HOW-TO] The ULTIMATE All-In-One Guide - I337M & MDL - MF3 - MK2
http://forum.xda-developers.com/showthread.php?t=2314494
But it appears to be quite long (lots of steps) and doesn't specifically refer to upgrading to Lollipop.
So what is the best way for me to get to Lollipop and keep root?? And keep the MDL bootloader, I guess? (I don't know if I even care about the bootloader if I'm not going for custom ROMs.)
Thank you!
So Confused
Please Choose This Method :
http://forum.xda-developers.com/gal...-to-update-to-i337oc3-5-0-1-keeproot-t3075814
Thank you so much Jack! I was looking at that guide also, but it says it's for "any 4.4.x Build/ROM" and since I'm on 4.2.2, I wasn't sure if it would work for me. Will it also for for 4.2.2?
One final question: I know this will wipe the phone. I assume it won't touch the card. All my photos, music and videos are on the card. All my contacts are in the cloud/Google. I can re-install my apps. Is there anything on the phone that I might want to think about backing up? And what's the best way to do this? I read that Titanium isn't reliable when switching OS versions.
One more final question: Will that process by muniz_ri touch my MDL bootloader? Or should I even care?
Thank you!
paleG said:
Thank you so much Jack! I was looking at that guide also, but it says it's for "any 4.4.x Build/ROM" and since I'm on 4.2.2, I wasn't sure if it would work for me. Will it also for for 4.2.2?
One final question: I know this will wipe the phone. I assume it won't touch the card. All my photos, music and videos are on the card. All my contacts are in the cloud/Google. I can re-install my apps. Is there anything on the phone that I might want to think about backing up? And what's the best way to do this? I read that Titanium isn't reliable when switching OS versions.
One more final question: Will that process by muniz_ri touch my MDL bootloader? Or should I even care?
Thank you!
Click to expand...
Click to collapse
@paleG It Will Wipe Only Internal Memory ... You Need Re-Install All Apps .. If You Need Just Take Backup .. For Me Titanium Backup Always I Am Using So Please Use It
jack_ssl said:
@paleG It Will Wipe Only Internal Memory ... You Need Re-Install All Apps .. If You Need Just Take Backup .. For Me Titanium Backup Always I Am Using So Please Use It
Click to expand...
Click to collapse
Thank you Jack! I'm going to give it a shot!
Worked like a charm! I went from rooted 4.2.2 directly to rooted 5.0.1. Woot!
Thank you Jack! :good:
paleG said:
Worked like a charm! I went from rooted 4.2.2 directly to rooted 5.0.1. Woot!
Thank you Jack! :good:
Click to expand...
Click to collapse
ENJOY :fingers-crossed:

Categories

Resources