Related
I had the older version of pacman and now trying to flash the new one. I downloaded pac_jfltetmo-nightly-20131018.zip and gapps-jb-20130813-signed.zip. I reboot to recover, restore my phone, flash the ROM then Gapps. I reboot my phone and when i get to the welcome page to setup my phone i click one start and instantly a message pops up saying, "Unfortunately, Setup Wizard has stopped. Blame Tyler." I tried a dozen times and the same thing. Can anyone help please.
Ninjaipod said:
I had the older version of pacman and now trying to flash the new one. I downloaded pac_jfltetmo-nightly-20131018.zip and gapps-jb-20130813-signed.zip. I reboot to recover, restore my phone, flash the ROM then Gapps. I reboot my phone and when i get to the welcome page to setup my phone i click one start and instantly a message pops up saying, "Unfortunately, Setup Wizard has stopped. Blame Tyler." I tried a dozen times and the same thing. Can anyone help please.
Click to expand...
Click to collapse
Same.
Same.
:crying:
Same.
Edit. I tried flashing the ROM by itself then booting the device. Then reboot into recovery and flash the gapps. It worked for me and I have seen others say it is hit or miss. It is worth a try though.
ernieb4768 said:
Same.
Edit. I tried flashing the ROM by itself then booting the device. Then reboot into recovery and flash the gapps. It worked for me and I have seen others say it is hit or miss. It is worth a try though.
Click to expand...
Click to collapse
This doesn't work for me... anyone got a solution? That's annoying..
Ninjaipod said:
I had the older version of pacman and now trying to flash the new one. I downloaded pac_jfltetmo-nightly-20131018.zip and gapps-jb-20130813-signed.zip. I reboot to recover, restore my phone, flash the ROM then Gapps. I reboot my phone and when i get to the welcome page to setup my phone i click one start and instantly a message pops up saying, "Unfortunately, Setup Wizard has stopped. Blame Tyler." I tried a dozen times and the same thing. Can anyone help please.
Click to expand...
Click to collapse
Did you try a clean install?
-wipe data/factory reset
-flash ROM
-flash gapps
-restart
no "restore"
If you say you had an "Older" version, does this mean you were on PAC23 (with android version 4.2.2)?
If you are on a pre-android 4.3 version of PAC, you need to do a full wipe. If you are already on a 4.3 version of PAC and you have "blame tyler" issues, try factory reset, if the problem persists, try a different nightly
Just a little curious...is the Blame Tyler error a specific error or set of errors, or does Tyler get blamed for everything?
Also, can we get Tyler's xda username, so he can get the blame he deserves :laugh:
Ninjaipod said:
I had the older version of pacman and now trying to flash the new one. I downloaded pac_jfltetmo-nightly-20131018.zip and gapps-jb-20130813-signed.zip. I reboot to recover, restore my phone, flash the ROM then Gapps. I reboot my phone and when i get to the welcome page to setup my phone i click one start and instantly a message pops up saying, "Unfortunately, Setup Wizard has stopped. Blame Tyler." I tried a dozen times and the same thing. Can anyone help please.
Click to expand...
Click to collapse
try redownloading the rom zip! and check its md5 code before flashing!!
also do a clean flash! all wipes!
if it doesnt work then even try fix permissions option !
Sent from my C6603 using Tapatalk 4
'Blame Tyler' error is just a generic message displayed when some component crashes/throws an unhandled exception, etc. It's not related to a bad ROM d/l or MD5 code. Telling people to do a full wipe b/c of an undiagnosed error condition doesn't help much. There are far too many little brokens with this ROM that need to be addressed and given more developer support, if this ROM is get more adoption.
Since RC1, nightlies have been dropping for 2 months now - no log of what's fixed or added, unless you are a dev who can wade thru the build change logs and understand what that means. It's ridiculous that we've gone this long since RC1 with a new stable release and documented fixes. Maybe this info is buried somewhere, but it's not in the Spring GS4 forum and the Pac-Man website forum is dead.
These errors are not specific to any one nightly and have been going on for months.
the tyler message is just a replacement of the force close messages. It is meant as a joke as he is one of our devs and we all take turns being blamed for breaking stuff.
If your coming from the old stable and flashing the newest nightile...comming from 4.2.2. to 4.3.1 then a full wipe is required due to the different databases and newer code that isnt compatable with the old version. This should fix your issues.
Also please dont post tylers username as its not nice to go and troll him...
I flashed the rom successfully after a full wipe this weekend. Amazeballs. I blame Tyler for making all my friends jealous of my phone.
I want to keep up with nightlies. The only thing not working for me is the wifi tether. If I have the US snapdragon quad-core variant do I want the pac-jfltetmo.zip?
Sent from my SGH-M919 using xda app-developers app
experienced the same problem and would be greatful for help
vedhed21 said:
I flashed the rom successfully after a full wipe this weekend. Amazeballs. I blame Tyler for making all my friends jealous of my phone.
I want to keep up with nightlies. The only thing not working for me is the wifi tether. If I have the US snapdragon quad-core variant do I want the pac-jfltetmo.zip?
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
Yes, if you have the T-Mobile variant of the S4.
keyboard not working.....
Papa Smurf151 said:
the tyler message is just a replacement of the force close messages. It is meant as a joke as he is one of our devs and we all take turns being blamed for breaking stuff.
If your coming from the old stable and flashing the newest nightile...comming from 4.2.2. to 4.3.1 then a full wipe is required due to the different databases and newer code that isnt compatable with the old version. This should fix your issues.
Also please dont post tylers username as its not nice to go and troll him...
Click to expand...
Click to collapse
i have flashed your pac man rom to my galaxy sl everything went right but its keyborad was not working then i manually flashed another JB keyboard in recovery mode... then it worked ... and i flashed blackgapps(JB 4.2.2) from ENHDROIX developers and it is working quite well...
the only problem i had was keyboard stuff..
so devs should fix that issue...
GUYS THIS IS VERY STRANGE.. The nav bar at the bottom overlaps half of the dock of next launcher which makes the dock completely unusable and ugly.. the same problem persist in 50% of the other apps notably go sms, quick pic, go launchers and many others.. I have tried the milestone releases and a few latest nightlies but its still not fixed..
Its hard to believe there are many discussions of issues about pac rom going on but I didn't find this preety obvious and significant one anywhere..
I have waited like 3 months since I started with pac, updated about 5 nightlies along the way hoping it will be fixed but no luck everytime..
This one is serious.. It has forced me not to use some of my fav apps and use pie navigation at times..
No problem with all the minor bugs but this one is frustrating..
ANY IDEA GUYS??
PS. pac ver 4.3.1 on sg tab p3100 and sg3
Sent from my GT-P3100 using XDA Premium 4 mobile app
Do you know how to enable navigation bar? I saw all the settings in PAC settings>navigation bar but found no option to enable it.
Sent from my GT-P3100 using XDA Premium 4 mobile app
So I had my i9500 s4 for like 5 months now.. never had a problem, but now.. It restarts randomly and a lot of items there is no sound at all or very low sound, I never messed with it!
That was on stock rom + Preseus kernel.. I installed custom rom with latest preseus kernel and no success, same problem
LegendJo said:
So I had my i9500 s4 for like 5 months now.. never had a problem, but now.. It restarts randomly and a lot of items there is no sound at all or very low sound, I never messed with it!
That was on stock rom + Preseus kernel.. I installed custom rom with latest preseus kernel and no success, same problem
Click to expand...
Click to collapse
Update ur phone with the new Firmware MJ8 ->- DOWNLOAD HERE - . This will be Android 4.3. When finish u can try change the STOCK KERNEL for the one u wish :highfive:
Joku1981 said:
Update ur phone with the new Firmware MJ8 ->- DOWNLOAD HERE - . This will be Android 4.3. When finish u can try change the STOCK KERNEL for the one u wish :highfive:
Click to expand...
Click to collapse
I was already full stock and faced that problem, will try again though, thanks a lot
I hope you don't experience any of the below things to otherwhise you have to replace your battery
do you have only battery drains or also random reboots?
the fact is that samsung shipped out a bad serie of batteries (which is confirmed by Samsung) their serial starts with BD
the symptoms of a bad battery are:
Huge battery drain
random reboots
while rebooting the phone hangs at samsungs logo
battery is swelling
phone shutting down while you have an incomming call/sms
when you are the "lucky one" to experience one of the above symptoms please replace your battery asap under warranty
if you don't do this you risk a phone exploding in the pocket of your pants this is not only painfull for your phone but also for "everything else" whats in there
LegendJo said:
I was already full stock and faced that problem, will try again though, thanks a lot
Click to expand...
Click to collapse
I know but this is latest firmware for ur zone . I think will work perfect for ya :highfive:
Hello,
I installed the official MIUI 4.7.4 build on my Note 3 N9005, all I get is a black screen after a reboot. I can get to Downloadmode and CWM recovery, so I got that going at least ^^
Things I have done:
- Flash via CWM
- I did the regular wipes and clearups
- I waited about an hour for the first boot, but nothing
- 2 restarts with 30 minutes waiting time for boot each, but nothing
- Installed it again after wiping a second time
The version is for N9005 (which I have), so this couldn't be the problem either. The downloaded file is also complete and not corrupted or anything. What did go wrong?
Edit: Solved. Philz Recovery was required for install.
Pumå said:
Hello,
I installed the official MIUI 4.7.4 build on my Note 3 N9005, all I get is a black screen after a reboot. I can get to Downloadmode and CWM recovery, so I got that going at least ^^
Things I have done:
- Flash via CWM
- I did the regular wipes and clearups
- I waited about an hour for the first boot, but nothing
- 2 restarts with 30 minutes waiting time for boot each, but nothing
- Installed it again after wiping a second time
The version is for N9005 (which I have), so this couldn't be the problem either. The downloaded file is also complete and not corrupted or anything. What did go wrong?
Click to expand...
Click to collapse
I read you need phillz recovery.
Where did you download it? I can't find a link
Sent from my SM-N9005 beast of a phone.
Sammath said:
I read you need phillz recovery.
Where did you download it? I can't find a link
Sent from my SM-N9005 beast of a phone.
Click to expand...
Click to collapse
Yeah, I read that too somewhere. I will report later if it worked with Philz Recovery
Edit: Awesome, it worked!
To anyone encountering the same issue: Replace your CWM recovery with Philz Recovery, and install MIUI with Philz Recovery...then it should work!
You will be stuck in the bootanimation after the MIUI install, wait 10-15 minutes first, if nothing happens, just press and hold the Power-off button until the phone shuts down and restarts again. Then MIUI shouldn't be stuck anymore.
First impressions: Bloody brilliant! Everyone loving a beautiful lightweight Android should get MIUI!
Everything seems to work fine. Make sure you install Google Apps alongside MIUI.
Samsung features: S Pen works perfectly, you just won't see the floating pointer indicating where you are. As it is the first version, it will be only a matter of time seeing MIUI builds with that kind of adjustments for the Note 3 So exited!
Pumå said:
Yeah, I read that too somewhere. I will report later if it worked with Philz Recovery
Edit: Awesome, it worked!
To anyone encountering the same issue: Replace your CWM recovery with Philz Recovery, and install MIUI with Philz Recovery...then it should work!
You will be stuck in the bootanimation after the MIUI install, wait 10-15 minutes first, if nothing happens, just press and hold the Power-off button until the phone shuts down and restarts again. Then MIUI shouldn't be stuck anymore.
First impressions: Bloody brilliant! Everyone loving a beautiful lightweight Android should get MIUI!
Everything seems to work fine. Make sure you install Google Apps alongside MIUI.
Samsung features: S Pen works perfectly, you just won't see the floating pointer indicating where you are. As it is the first version, it will be only a matter of time seeing MIUI builds with that kind of adjustments for the Note 3 So exited!
Click to expand...
Click to collapse
to have S pen and all it´s glory we need a ported version of MIUI in a TW base.. ( PLEASE IF ANYONE COULD DO THIS)
this one for sure is CM base...
btw tried it very good rom
Battery impression
@btimeh
The battery life is amazing in MIUI - it was one of the things I was watching first.
I seem to get about 1 to 2 hours more of battery life compared to any of my previous TouchWiz ROMs like X-Note or Omega...well it is obvious because MIUI is very lightweight and isn't filled with junk or features noone uses. MIUI is also faster than anything you have seen.
I am using the stock Kernel and get these good results. And that with the first MIUI version ever, who knows how even better it can get in the future.
Yes, there are some bugs for now, but these things will be fixed soon. For being the first version, it amazes me how good everything is already
Great,will test asap.
I tested the rom and put back my backup. This is close to daily use but for some reason I can't use whatsapp. It will fc and Google playstore does fc as well after you've installed it. Also I keep getting that my system storage is full (even though it's not) still as smooth as ever tho, just not rdy for daily use yet. We'll at least not for me
Sent from my SM-N9005 beast of a phone.
Sammath said:
I tested the rom and put back my backup. This is close to daily use but for some reason I can't use whatsapp. It will fc and Google playstore does fc as well after you've installed it. Also I keep getting that my system storage is full (even though it's not) still as smooth as ever tho, just not rdy for daily use yet. We'll at least not for me
Sent from my SM-N9005 beast of a phone.
Click to expand...
Click to collapse
Yeah, WhatsApp isn't working. But they will fix it soon.
All Google Apps do work though, which version did you install? I installed the gapps-stock 4.4.2 (20140608), everything works fine.
Your system storage shows to be full? That is strange, I don't know what could have been the cause. I had something like that on some other ROM in the past, I wiped the internal SD card and formatted /system with CWM, then installed again (make sure keeping the .zip files on external SD ^^). It had worked for me.
I did wipe everything. I installed the rom 3 times just to try. I'll wait till whatsapp works in the following update and I'm ready to use this baby daily
Sent from my SM-N9005 beast of a phone.
Sammath said:
I did wipe everything. I installed the rom 3 times just to try. I'll wait till whatsapp works in the following update and I'm ready to use this baby daily
Sent from my SM-N9005 beast of a phone.
Click to expand...
Click to collapse
Yeah, in this case it would be better to wait. They released an OTA update today (4.7.4 to 4.7.6), but it did not fix WhatsApp yet
I just installed another version from another maintainer and whatsapp works! Also the rest works now, no problems with anything anymore!
Sent from my SM-N9005 beast of a phone.
Sammath said:
I just installed another version from another maintainer and whatsapp works! Also the rest works now, no problems with anything anymore!
Sent from my SM-N9005 beast of a phone.
Click to expand...
Click to collapse
I updated to 4.7.6 and whatsapp and whatsapp+ still didnt work....prove it
Sent from my SM-G900F using XDA Premium 4 mobile app
This OK?
Sent from my SM-N9005 beast of a phone.
@Sammath, can you provide a link
Sure, slow as hell like the other link tho hahaha. Took me 2 hours to dl http://miuirom.xiaomi.com/rom/u10091389/4.7.5/miui_9005_ws008_4.7.5_02028d1f4e_4.4.zip
Sent from my SM-N9005 beast of a phone.
Sammath said:
I just installed another version from another maintainer and whatsapp works! Also the rest works now, no problems with anything anymore!
Sent from my SM-N9005 beast of a phone.
Click to expand...
Click to collapse
do you have S pen features and multiwindow working??
Is there any way to change the language?
camaxa said:
do you have S pen features and multiwindow working??
Click to expand...
Click to collapse
no, this rom doesn't have any of that.
fertippt said:
Is there any way to change the language?
Click to expand...
Click to collapse
You can change it to English and that's it.
Sent from my SM-N9005 beast of a phone.
My whatsapp doesnt work. Plus doesnt work too.
Should i load the rom from your link? whats the dieffernts?
First of all I'd like to thank the following forum members for their contributions:
@Zackptg5 and @megaghostgamer for their basic steps
@xdabbeb for his bootstack
Major thanks to @Cloudyfa for his amazing ports!
I've compiled their steps into a very user friendly guide with all downloads in one place.
I recommend TWRP for the procedure. Any version 2.7.0.0 or above should do.
First of all, you need these files:
Dorimanx 3.9.2 kernel vs980 (Make sure you download the kernel for the VS980)
Aroma Patch Fix
CloudyG2 3.3
xdabbeb's vs980 39a bootstack
Then, follow the steps carefully. I am not responsible if this didn't work for you as it did for me.
Backing up is recommended, nandroid or data backups.
Boot your phone into TWRP. (Recommended method is going to recovery after turning off the device)
Wipe everything except internal storage.
Flash Xdabebbeb's VS980 39A bootstack.
Reboot the device into recovery (there should be an option for this in the reboot section of TWRP).
Flash CloudyG2 3.3 and make sure you select your variant as VS980. Make sure you uncheck the reboot option at the end of the installation.
Flash the Aroma Patch Fix zip, and select your variant as VS980. Make sure you uncheck the reboot option at the end of the installation.
Flash the VS980 39A bootstack once more.
Flash the Dorimanx 3.9.2 kernel zip.
Wipe cache/dalvik cache.
Reboot the device to system.
Notes:
First boot usually takes awhile. The pulsing LED will show up for a long time with the LG Logo.
Mobile Data does not work unless you enable data roaming.
Please hit that thanks button if this guide helped any of you! Any questions, just post down below.
I have followed everything as it has been mentioned in the guide.
When i rebooted the system in the end, LG logo appeared for a second and then black screen with [880] Fastboot mode started.
now what should i do ? its just stuck here.
Shujja Haider said:
I have followed everything as it has been mentioned in the guide.
When i rebooted the system in the end, LG logo appeared for a second and then black screen with [880] Fastboot mode started.
now what should i do ? its just stuck here.
Click to expand...
Click to collapse
You flashed the kernel for the wrong variant. Flash the one for the vs980, its towards to bottom of the download page. You can still boot into recovery by following this guide: http://forum.xda-developers.com/showthread.php?t=2534981
Zackptg5 said:
You flashed the kernel for the wrong variant. Flash the one for the vs980, its towards to bottom of the download page. You can still boot into recovery by following this guide: http://forum.xda-developers.com/showthread.php?t=2534981
Click to expand...
Click to collapse
oh yes.. my bad.. the kernel was mistakenly downloaded from LS980 instead of VS980. again followed the process and it is starting up.
lets hope reception problem is fixed.
Shujja Haider said:
oh yes.. my bad.. the kernel was mistakenly downloaded from LS980 instead of VS980. again followed the process and it is starting up.
lets hope reception problem is fixed.
Click to expand...
Click to collapse
Easy mistake to make (I did that too once). It'll say you're roaming, but that's just a weird bug. Go into networks setting and enable data while roaming and it'll work fine. You're not actually roaming so you won't get charged for it.
Oh well. Added an extra precaution next to the download link.
Zackptg5 said:
Easy mistake to make (I did that too once). It'll say you're roaming, but that's just a weird bug. Go into networks setting and enable data while roaming and it'll work fine. You're not actually roaming so you won't get charged for it.
Click to expand...
Click to collapse
I did everything correctly now .. even the enable data while roaming is checked.
I am receiving a few bars of reception but neither i am able to receive calls or make calls .. first time there was message emergency calls only but now .. nothing ..
very rarely calls or messages are received while most of the time .. just nothing .. no incoming or outgoing
Shujja Haider said:
I did everything correctly now .. even the enable data while roaming is checked.
I am receiving a few bars of reception but neither i am able to receive calls or make calls .. first time there was message emergency calls only but now .. nothing ..
very rarely calls or messages are received while most of the time .. just nothing .. no incoming or outgoing
Click to expand...
Click to collapse
These things also happened to me
My phone is unusable now
Even after i restored my backup from twrp
Please anyone
How you cell is unusable now?
I am not able to access to network.. No data connection at all.. Other than that.. Charging is seriously slow...
Sent from my VS980 4G using XDA Free mobile app
Shujja Haider said:
How you cell is unusable now?
I am not able to access to network.. No data connection at all.. Other than that.. Charging is seriously slow...
Sent from my VS980 4G using XDA Free mobile app
Click to expand...
Click to collapse
Flash xdabbebs rom: http://forum.xda-developers.com/showthread.php?t=2715408
It is stock with some tweaks, g3 ported apps and such. If you still have these issues, it's likely a hardware issue
You mean I should not use cloudyG2 3.3?
But if it is hardware issue then why I was not facing it other ROMs?
Sent from my VS980 4G using XDA Free mobile app
Shujja Haider said:
You mean I should not use cloudyG2 3.3?
But if it is hardware issue then why I was not facing it other ROMs?
Sent from my VS980 4G using XDA Free mobile app
Click to expand...
Click to collapse
Im saying that the hardware issue could have just developed and an easy way to test that is with flashing a stockish rom. If it's a software issue, than you'll have no problems with it. I've never had signal issues with Cloudys rom on my vs980
Zackptg5 said:
Im saying that the hardware issue could have just developed and an easy way to test that is with flashing a stockish rom. If it's a software issue, than you'll have no problems with it. I've never had signal issues with Cloudys rom on my vs980
Click to expand...
Click to collapse
No i had signals issues before and in this room the issue seemed to have worsen but i think its okay .
but the real issue now is .. extremely extremely slow charging .. even tweaking the kernel with fast charging at 2000mAH.. its such a lazy charging .. you can imagine .. for more than 2.5 hours, the charging has just been moved from 12% to 34%.
not using at all .. only charging .. how to resolve this issue ??
Shujja Haider said:
No i had signals issues before and in this room the issue seemed to have worsen but i think its okay .
but the real issue now is .. extremely extremely slow charging .. even tweaking the kernel with fast charging at 2000mAH.. its such a lazy charging .. you can imagine .. for more than 2.5 hours, the charging has just been moved from 12% to 34%.
not using at all .. only charging .. how to resolve this issue ??
Click to expand...
Click to collapse
Try uninstalling the apps installed with dormant kernel (color changed, synapse, dorimanx kernel settings) forget the names for them but you'll figure it out. Then flash xdabbebs stock kernel (permissive): http://forum.xda-developers.com/verizon-g2/development/vs98039a-stock-fw-t3051560
If the slow charge is still present, then it's likely a hardware issue. Sounds like you need a new phone with all of the problems you're having. Have you tried cleaning out the charging port with compressed air?
Zackptg5 said:
Im saying that the hardware issue could have just developed and an easy way to test that is with flashing a stockish rom. If it's a software issue, than you'll have no problems with it. I've never had signal issues with Cloudys rom on my vs980
Click to expand...
Click to collapse
Zackptg5 said:
Try uninstalling the apps installed with dormant kernel (color changed, synapse, dorimanx kernel settings) forget the names for them but you'll figure it out. Then flash xdabbebs stock kernel (permissive): http://forum.xda-developers.com/verizon-g2/development/vs98039a-stock-fw-t3051560
If the slow charge is still present, then it's likely a hardware issue. Sounds like you need a new phone with all of the problems you're having. Have you tried cleaning out the charging port with compressed air?
Click to expand...
Click to collapse
you probably are right that i might need a new phone but i had just got this one and charging was okay with kitkat based ROMS.. like i was using CloudyFlex before and no issue but only with this rom i had this issue. and I had not tried compressed air cleaning at all .. i think i must consider changing the kernel .. it might save the issue..
Zackptg5 said:
You flashed the kernel for the wrong variant. Flash the one for the vs980, its towards to bottom of the download page. You can still boot into recovery by following this guide: http://forum.xda-developers.com/showthread.php?t=2534981
Click to expand...
Click to collapse
Where did you get that version of Dorminax or can you use a later version of that Kernel
Shujja Haider said:
you probably are right that i might need a new phone but i had just got this one and charging was okay with kitkat based ROMS.. like i was using CloudyFlex before and no issue but only with this rom i had this issue. and I had not tried compressed air cleaning at all .. i think i must consider changing the kernel .. it might save the issue..
Click to expand...
Click to collapse
I'm thinking that the first install of the wrong kernel did some stuff.
Try backing up your stuff, using LG Tool to restore back to stock, and retry the procedure. I'm coming straight off of Resurrection Remix 5.1.1 and I've had no issues with this ROM. Data works without enabling Roaming too.
TheSkilledPlaya said:
I'm thinking that the first install of the wrong kernel did some stuff.
Try backing up your stuff, using LG Tool to restore back to stock, and retry the procedure. I'm coming straight off of Resurrection Remix 5.1.1 and I've had no issues with this ROM. Data works without enabling Roaming too.
Click to expand...
Click to collapse
LG Tool doesnt take me back to stock.. i have to manually flash stock ROM for this ..
actually I had mentioned before, i was already facing severe signals issues and not to forget, GPS is also faulty.
so might be hardware issue that is continued in this ROM too.
But what has been added is .. extremely slow charging .. charging is totally dead.
Using Dorimanx Kernel v 4.6.
even enabled fast charging at 1800 but no effect at all ..
Shujja Haider said:
LG Tool doesnt take me back to stock.. i have to manually flash stock ROM for this ..
actually I had mentioned before, i was already facing severe signals issues and not to forget, GPS is also faulty.
so might be hardware issue that is continued in this ROM too.
But what has been added is .. extremely slow charging .. charging is totally dead.
Using Dorimanx Kernel v 4.6.
even enabled fast charging at 1800 but no effect at all ..
Click to expand...
Click to collapse
I thought my guide mentioned version 3.9.2..
Well if this ROM doesn't work out for you, stay on CloudyG2 2.2. It's the most stable ROM we have for our VZW G2 out there.
TheSkilledPlaya said:
I thought my guide mentioned version 3.9.2..
Well if this ROM doesn't work out for you, stay on CloudyG2 2.2. It's the most stable ROM we have for our VZW G2 out there.
Click to expand...
Click to collapse
I think so its not working out well .. though i have loved it .. its interface and everything but i have faced so many issues and now i am observing videos are not being played at all ..even tried installing MX Player but same issue..
tonight i am going to flash debloated Stock lollipop cuz i want to use LP .. if it doesn't work out .. then i will revert back to CloudyFlex cuz that was working fine too ..
CloudyG2 and CloudyFlex.. are they the same or different .. i am sorry for my ignorance but these both roms were downloaded by one of my friend so I didn;t keep a check..
Hi, i really have big problem.
my phone has random reboots after trying to turn the screen on when its locked.
I can use the lockscreen around 30 times until i get a reboot. The screen doesnt even turn on. The phone vibrates and reboots.
On Lollipop everything worked fine,no random reboots or else.
I've got the newest BL and modem,otherwise i wouldnt have the chance to use the rom correctly.
I'm currently using Alexandrs rom , v3.2.
Can anyone help me?
Greets
Does this also happens on stock rom?
tapatalked
For me it works great with the same rom.
I also tried the ported version of MM on my G900F (G900M Marshmallow) and had the same problems.
Currently i am using alexandrs rom v3.2. I didnt try another MM rom.
Isnt there anyone who could help me? :'(
...
007gamer said:
I also tried the ported version of MM on my G900F (G900M Marshmallow) and had the same problems.
Currently i am using alexandrs rom v3.2. I didnt try another MM rom.
Isnt there anyone who could help me? :'(
Click to expand...
Click to collapse
I had the same issue with this ROM then I update to 3.3 version and I change my recovery to TWRP 3.0.2.2 test2. https://idlekernel.com/twrp/klte/testing/
And now this issue disappeared.
Sent from my SM-G900F using XDA-Developers mobile app
pepe100 said:
I had the same issue with this ROM then I update to 3.3 version and I change my recovery to TWRP 3.0.2.2 test2. https://idlekernel.com/twrp/klte/testing/
And now this issue disappeared.
Sent from my SM-G900F using XDA-Developers mobile app
Click to expand...
Click to collapse
I still have this problem with twrp 3.0.2.2 test2 and last alexndr rom CPD7
I've also this problem with stock CPD7 rom an no modding.
I still have this problem on cpe2 any fix??? Thanx
Hi,
I also have the problem. There is one thing that looks like related: It only happens if you have the fingerprint reader enabled for unlocking. Is this the same for others?
I also tried latest CPEA ROM by alexandr -> no change. I did not update TWRP because this should be unrelated to lockscreen.
---------- Post added at 07:40 AM ---------- Previous post was at 07:37 AM ----------
igorescu04 said:
For me it works great with the same rom.
Click to expand...
Click to collapse
Do you have fingerprint unlocking enabled? For me it only happens when it is enabled (e.g., when I am not at home). At home my phone unlocks automatically and I can unlock it as often as I want. When I need to use the fingerprint reader it reboots every 10 to 30 times.
I had random reboots on my device after updating from kitkat to marshmallow (stock, no root, over ota)
I didn't wipe after updating (I would suggest to wipe as the first step)
I came back to kitkat because I didn't like the new marshmallow ui (especially the white settings menu!) and because of the reboots. however after reverting to kk I don't have any reboots anymore. so i would suggest just to wipe everything and if it doesn't work go back to kitkat
Sent from my SM-G900F using XDA-Developers mobile app
It is a mm bug so we have to wait for a fix from Samsung
I am now trying CPF3 ROM (by Alexndr)
I have the same problem with 6.01 update
I made full wipe
&no solution
Abo_Moaaz said:
I have the same problem with 6.01 update
I made full wipe
&no solution
Click to expand...
Click to collapse
Which ROM version?
lets send samsung some emails about this problem, maybe they'll fix these bugs soon.
I am on stock CPEM and no problems any more flashed via odin over alexndr rom and it is fixed all CPXX roms caused reboot on lockscreen for me I will stick with stock
cheaterel said:
I am on stock CPEM and no problems any more flashed via odin over alexndr rom and it is fixed all CPXX roms caused reboot on lockscreen for me I will stick with stock
Click to expand...
Click to collapse
For me stock ROM has the same problem! This is why I went back to Alexndr ROM.
I just checked CPF3 release today. I was able to make it reboot on lockscreen again, but only when fingerprint reader is enabled. Does never happen without!
thetaphi said:
For me stock ROM has the same problem! This is why I went back to Alexndr ROM.
I just checked CPF3 release today. I was able to make it reboot on lockscreen again, but only when fingerprint reader is enabled. Does never happen without!
Click to expand...
Click to collapse
Ask Alexndr to make a CPEM rom I have 3 days with fingerprint enabled and no reboots
Ps :
Here it is the link http://www.sammobile.com/firmwares/download/75351/G900FXXU1CPEM_G900FROM1CPE3_ROM/ first firmware that works for me without random reboots
cheaterel said:
Ask Alexndr to make a CPEM rom I have 3 days with fingerprint enabled and no reboots
Ps :
Here it is the link http://www.sammobile.com/firmwares/download/75351/G900FXXU1CPEM_G900FROM1CPE3_ROM/ first firmware that works for me without random reboots
Click to expand...
Click to collapse
Stock firmware on unbranded fone is no option for me, because it does not have enabled VOLTE in Germany. The one with right CSC is still on Android 5.
I just tested stock ROM for a day, but gave up after doing a loop of "lock - unlock - fingerprint - lock- unlock - fingerprint - ...". Very easy to reproduce, you just need to do it about 20 times. So it has nothing to do with Alexndr.
The firmware version you mentioned is the same kernel and changelist as the recent Alexndr one.
Interestingly the reboots were slightly different with CPF3: Instead of just rebooting with only the button lights on but dark screen, in CPF3 it woke up partially, but screen stayed black, button lights on. But it did not reboot. To make it reboot you had to try to wake it up again. Before that it was rebooting after 2 seconds automatically.