Hi there,
wondering if anyone has good settings for handbrake?
machina2 said:
Hi there,
wondering if anyone has good settings for handbrake?
Click to expand...
Click to collapse
In for this as well.
Also want to start using it for the TV too.
For HD videos in the best quality with the best compression:
Destination: Make sure you set the file format as MKV.
Container: MKV
Size: Original (auto-set)
Anamorphic: Loose(default)
Modulus: 2 (default)
Cropping: auto/0x0x0x0
Filters: All off.
De-interlace: Only if using a US file in a Non-US device (Better to turn it off and set this in the video player.)
Video:
x264 preset: Set this to the slowest possible setting your PC and patience can handle. Slower = higher quality & smaller files.
Video Codec: H.264 (x264)
Framerate: Same as source. (NTFS (USA) = 29.97 fps, PAL(Worldwide) = 24/25 fps.)
Leave the rest on default.
Audio:
Codec: MP3 or AAC. For best compatibility, pick MP3. Most videoplayers have cut out AC3 and DTS support due to licensing issues. (And Stock never supported DTS anyway.) AAC is also an option.
Bitrate: For best sound quality, 192 and above.
Sample Rate: Auto.
Mixdown: Depends on what's originally included in the file. You can't force a 2:1 onto a 5:1. (The audio track should say what it is.) If unsure, use default.
DRC: Leave alone
Gain: If you find the sound too quiet, add 1-5 points.
Subtitles:
If you've got a .srt file you want to bake into the video file, add here. If you prefer to use a separate .srt file (same name as the video = auto detect by most players), skip.
Chapters:
If you want to make chapters, do so here. If not, skip.
Don't know if Stock plays MKV, but you're better off using another app anyway. VLC, Dice, MXplayer, BSplayer. Any of those.
"Don't know if Stock plays MKV, but you're better off using another app anyway. VLC, Dice, MXplayer, BSplayer. Any of those."
MKV won't play in my stock SM-P900 but MXplayer will play those MKV files. Haven't tried the others mentioned.
Related
Hello everyone,
I have seen a number of different posts about the best settings to encode videos for the Droid X, and I have found a method that I am extremely happy with. I use these settings to encode HD MKV files for playback on the Droid X. These encodings play without a hitch, and only suffer slight sync issues that occur when changing volume, and skipping forwards/backwards into the video. This is not a huge problem, as the sync issues only last for 1-2 seconds maximum. I have tested a large variety of Video players, and I have found that RockPlayer offers the smoothest playback available (in my experience). These settings will also work for many other file types, just make sure your Source resolution is higher than that of your output and you will be pleased!
Software Required: MediaCoder (Free, can be downloaded HERE)
Settings
Video Tab:
Format: H.264
Mode: Constant Bitrate (1400)
Source: Auto Select
Encoder: Auto Select (If your video card supports CUDA, select CUDA Encoder for faster encoding).
x264 Tab (On the right when selecting the Video Tab):
Profile: Baseline (This is extremely important!)
Sound Tab:
Encoder: FAAC
Format: LC-AAC
Average Bitrate: 160
MPEG Version: MPEG4
Container: AAC
Container Tab:
Container: MP4
Picture Tab:
Resize: 848x480
Aspect Ratio: Keep Display AR
Crop: Disabled
Frame Rate: 25
Effects: Filter by Encoder
I hope these settings will come in handy for others. I have spent a lot of time testing different settings and Encoders, but I can honestly say I have gotten the best results using these!
Let me know how these settings work for you, I hope some of you can help me find a video player that will not show any issues when changing volume and skipping forward/backwards through videos.
Hello all I just got my E Pad and looking to load some movies onto it.
Can anyone tell me the best format to use for quality. I have an 8Gig Micro to use for videos. I also use DVDFab for converting.
Thanks
Diverwes
I'm wondering this as well. I've seen a few threads on here regarding 720p settings, but how about non-hidef? What would people recommend using? I copied some movies over to my TF when I first got it and the playback was horrible, regardless of what player I used.
abeln2672 said:
I'm wondering this as well. I've seen a few threads on here regarding 720p settings, but how about non-hidef? What would people recommend using? I copied some movies over to my TF when I first got it and the playback was horrible, regardless of what player I used.
Click to expand...
Click to collapse
Anything works for non-HD, just make sure you play it with something like Mobo Player, the default player doesn't support that many formats, nor does it play it as smoothly. In terms of HD, just look at the handbrake preset or install Mediainfo to check what profile your h264 video is at (Baseline, Main, High), it usually is Main/High. If it is 720p High, you may try playing it, but anything with more than 3 reference frames will lag.
something weard is i converted some movies they play but only at 2x they fly through.
diverwes said:
something weard is i converted some movies they play but only at 2x they fly through.
Click to expand...
Click to collapse
I had this issue too. The file was an MP4 H.264 encoded file but the audio codec was not in stereo.
I re-encoded the movie using AVS Video Converter with these settings:
Frame Size: 1280x 720 (depending on movie format)
Video Codec: H.264/AVC
Frame rate: 24fps or match source video
Bitrate: 1500KBs video
Video Advanced: Multi-pass (first pass fast)
Audio Codec: MPEG-2/4 Audio 192KBS Stereo not 5.1
File type: MP4 PSP
With these settings, high def videos play awesome on my Transformer both on stock player and Rock Player with hardware decoding setting.
http://www.freemake.com/free_video_converter/?from=app
Extremely simple and easy to use Video converter handling almost any video format known to man.
It even has a built in android preset for making videos work with android devices.
---------------------------------------------------------------------------------------
For anyone who is curious, this is my custom general purpose android preset (Based of the 800x480 Android Preset)
Under the advanced config settings:
1. Framesize: Custom 720x400 (For 16x9 content) 640x480 (for 4x3 content)
2. Choose Video Codec as H.264
3. Custom bitrate as 700 kbps (or 1400 kbps for higher quality but bigger filesize)
4. Leave everything else as default.
Audio:
128k AAC Stereo audio
Thanks for this. I've been using Freemake for quite sometime. Always works great.
Is this preset android video player ready? I'm all for software players like MX player or Mobo player on android, but I'm EXTREMELY curious why a standard mp4 file I d/l from the internet cannot be played by the default android (gallery / video??) player.
I want to know what the video spec the tegra2 can play at hardware level, maximum video dimensions, bit rate etc.... Anyone know?
veer01_42 said:
http://www.freemake.com/free_video_converter/?from=app
Extremely simple and easy to use Video converter handling almost any video format known to man.
It even has a built in android preset for making videos work with android devices.
---------------------------------------------------------------------------------------
For anyone who is curious, this is my custom general purpose android preset (Based of the 800x480 Android Preset)
Under the advanced config settings:
1. Framesize: Custom 720x400 (For 16x9 content) 640x480 (for 4x3 content)
2. Choose Video Codec as H.264
3. Custom bitrate as 700 kbps (or 1400 kbps for higher quality but bigger filesize)
4. Leave everything else as default.
Audio:
128k AAC Stereo audio
Click to expand...
Click to collapse
nexgenasian said:
I want to know what the video spec the tegra2 can play at hardware level, maximum video dimensions, bit rate etc.... Anyone know?
Click to expand...
Click to collapse
Max. 720p H.264 high-profile and 1080p baseline-profile do play with HW acceleration. There was some limit on bitrate, but it's so high that you shouldn't need to worry about that.
I'm wanting to put a few videos on for my sons, I cannot get the audio codec right, so far I've tried ac3 and aac in mp4 container with avc video, the video plays back fine but never plays audio. Tried a couple of different players (dice player just force closes) but they part without audio too. Any one know what audio codec the default video player accepts?
I can stream from my pc using plex and it works fine but would rather play from local sd card
Sent from my LG-P920 using XDA App
Have you tried Mobo Player? Works fine for me and i play all types, mkv, avi, mp4
Plus they have lots of codec packages to add if havng any trouble,
Worth a try.
foxguard said:
Have you tried Mobo Player? Works fine for me and i play all types, mkv, avi, mp4
Plus they have lots of codec packages to add if havng any trouble,
Worth a try.
Click to expand...
Click to collapse
Thank you for the suggestion! I have been wondering the same.
I wish there was a simple way to side-load codecs onto Android so the default video player supports more
Sent from my VegaComb using Tapatalk
No probs.
Let me know how you get on.
Try this from modaco.
Afternoon all
As mentioned in a few threads, I've been tinkering with encoding settings in Handbrake in order to get the optimal settings for converting video. After spending a few hours with this last night and this morning - what a fun Friday night, huh? - I think I have nailed it. This profile will allow you to watch files using the native video player - you don't need anything like RockPlayer, or VPlayer. This means that they should be hardware accelerated. You can use something like RockPlayer, but framerates will suffer if you're using HD videos. I tested this using the 1080p MP4 version of Big Buck Bunny as the input file and it works very well - I'm going to give this a shot on some of my other videos today.
I have attached the profile in question.
EDIT: Rename the file to "Vega.plist" before importing (take off the .txt extension) - I've only just realised that modaco will not let me upload PLIST files...
Don't try to double click this, as it might try to open in Quicktime - no idea what it will do on a Mac! To import it open Handbrake, go to "Presets" and click "Import". The profile export feature is experimental, so I'll list the detailed settings that I used in case it does not work.
Firstly though, if you're not sure what you're doing in the "Picture" tab, have a read of this quick primer on Anamorphic video. If you want to scale down a 720p or 1080p video to match the Vega's resolution, set Anamorphic to loose, modulus to 16, and set the video width to 1024. For any videos that are not HD, or if you're not sure, just set this to "Strict": this will make sure that the video always displays in the correct aspect ratio, but you won't be able to scale the video down. Don't mess with the "Cropping" settings unless you know what you're doing.
I'd highly recommend scaling 720p or 1080p HD videos down to match the Vega's resolution - it drastically reduces the output size:
The original version of Big Buck Bunny (1920*1080): 885MB
Strict anamorphic - no scaling (1920*1080): 388MB
Scaled down to 1024*576 with loose anamorphic: 128MB
The Vega will play 720 or 1080 files, but you won't see that extra detail so there's no point in wasting the extra space on your SD card, IMO.
Detailed settings - in case the attachment fails. If anyone finds any optimisations for this, please let me know!
Output Settings:
Container: MP4 File
Large file size: Unchecked
Web optimised: Unchecked
iPod 5G support: Checked
Video Filters Tab:
Detelecine: Default
Decomb: Default
Deinterlace: Off
Denoise: Off
Deblock: Off
Grayscale Encoding: Off (Unchecked)
Video Tab:
Video Codec: H.264 (x264)
Framerate: Same as source
Quality: Constant Quality, set slider to RF:20
Audio Tab:
This is going to vary, depending on the audio tracks in the source video (for example, a DVD may have multiple languages and each of these will be a different audio track) - I have not yet tested multiple audio channels on the Vega, so I highly recommend only adding one audio track to your output file. The following drop-downs must be set:
Audio Codec: AAC (faac)
Mixdown: Stereo (no point having multi-channel audio if you can't play it on the Vega)
Samplerate: Auto
Bitrate: 160
Subtitles:
This will depend entirely on whether you want to include the subtitles from the source video. This can get a bit more complicated, so I'm not going to cover it here; if your source has subtitles as a separate track (i.e., soft subs not hard subs), you may need to take some extra steps - do some research on this over at afterdawn.com or doom9.org.
Chapters:
If your source video has chapters - like a DVD - you can replicate those chapters in the output video; if there are no chapter markers in the source, the checkbox is greyed out.
Advanced:
There's quite a lot in here, so bear with me...
Reference Frames: Default (3)
Maximum B-Frames: Default (3)
CABAC Entropy Encoding: Checked
8x8 Transform: Checked
Weighted P-Frames: Unchecked
Pyramidal B-Frames: Default (Normal)
No DCT-Decimate: Unchecked
Adaptive B-Frames: Optimal
Adaptive Direct Mode: Default (Spatial)
Motion Estimation Method: Default (Hexagon)
Subpixel ME & Mode Decision: Default (7)
Adaptive Quantisation Strength: slider set to middle
Psychovisual Rate Distortion: slider set to middle
Psychovisual Trellis: slider set fully to the left
Partition Type: Default
Trellis: Default
Deblocking: Both drop-downs set to Default (0)
For those that are interested in the more nerdy side, I started off by copying Handbrake's built in "High Profile" x264 settings. I found this page, which mentions that the Xoom only supports the baseline x264 profile, so I turned off the advanced x264 stuff. However I realised that even though the hardware is the same, the Xoom is not the Vega. So started re-enabling the advanced options one by one to see if any caused a problem. The only one I found that caused any issue was weighted P-Frames, which seemed to make videos judder slightly.
Attached File(s)
Vega.plist.txt (3.52K)
Number of downloads: 521
This post has been edited by blcollier: 26 March 2011 - 01:44 PM
Cheers but I shouldn't have to convert for my Optimus 3D as well as the Vega, one video should be able to work on both
kenfisher said:
Afternoon all
As mentioned in a few threads, I've been tinkering with encoding settings in Handbrake in order to get the optimal settings for converting video. After spending a few hours with this last night and this morning - what a fun Friday night, huh? - I think I have nailed it. This profile will allow you to watch files using the native video player - you don't need anything like RockPlayer, or VPlayer. This means that they should be hardware accelerated. You can use something like RockPlayer, but framerates will suffer if you're using HD videos. I tested this using the 1080p MP4 version of Big Buck Bunny as the input file and it works very well - I'm going to give this a shot on some of my other videos today.
I have attached the profile in question.
EDIT: Rename the file to "Vega.plist" before importing (take off the .txt extension) - I've only just realised that modaco will not let me upload PLIST files...
Don't try to double click this, as it might try to open in Quicktime - no idea what it will do on a Mac! To import it open Handbrake, go to "Presets" and click "Import". The profile export feature is experimental, so I'll list the detailed settings that I used in case it does not work.
Firstly though, if you're not sure what you're doing in the "Picture" tab, have a read of this quick primer on Anamorphic video. If you want to scale down a 720p or 1080p video to match the Vega's resolution, set Anamorphic to loose, modulus to 16, and set the video width to 1024. For any videos that are not HD, or if you're not sure, just set this to "Strict": this will make sure that the video always displays in the correct aspect ratio, but you won't be able to scale the video down. Don't mess with the "Cropping" settings unless you know what you're doing.
I'd highly recommend scaling 720p or 1080p HD videos down to match the Vega's resolution - it drastically reduces the output size:
The original version of Big Buck Bunny (1920*1080): 885MB
Strict anamorphic - no scaling (1920*1080): 388MB
Scaled down to 1024*576 with loose anamorphic: 128MB
The Vega will play 720 or 1080 files, but you won't see that extra detail so there's no point in wasting the extra space on your SD card, IMO.
Detailed settings - in case the attachment fails. If anyone finds any optimisations for this, please let me know!
Output Settings:
Container: MP4 File
Large file size: Unchecked
Web optimised: Unchecked
iPod 5G support: Checked
Video Filters Tab:
Detelecine: Default
Decomb: Default
Deinterlace: Off
Denoise: Off
Deblock: Off
Grayscale Encoding: Off (Unchecked)
Video Tab:
Video Codec: H.264 (x264)
Framerate: Same as source
Quality: Constant Quality, set slider to RF:20
Audio Tab:
This is going to vary, depending on the audio tracks in the source video (for example, a DVD may have multiple languages and each of these will be a different audio track) - I have not yet tested multiple audio channels on the Vega, so I highly recommend only adding one audio track to your output file. The following drop-downs must be set:
Audio Codec: AAC (faac)
Mixdown: Stereo (no point having multi-channel audio if you can't play it on the Vega)
Samplerate: Auto
Bitrate: 160
Subtitles:
This will depend entirely on whether you want to include the subtitles from the source video. This can get a bit more complicated, so I'm not going to cover it here; if your source has subtitles as a separate track (i.e., soft subs not hard subs), you may need to take some extra steps - do some research on this over at afterdawn.com or doom9.org.
Chapters:
If your source video has chapters - like a DVD - you can replicate those chapters in the output video; if there are no chapter markers in the source, the checkbox is greyed out.
Advanced:
There's quite a lot in here, so bear with me...
Reference Frames: Default (3)
Maximum B-Frames: Default (3)
CABAC Entropy Encoding: Checked
8x8 Transform: Checked
Weighted P-Frames: Unchecked
Pyramidal B-Frames: Default (Normal)
No DCT-Decimate: Unchecked
Adaptive B-Frames: Optimal
Adaptive Direct Mode: Default (Spatial)
Motion Estimation Method: Default (Hexagon)
Subpixel ME & Mode Decision: Default (7)
Adaptive Quantisation Strength: slider set to middle
Psychovisual Rate Distortion: slider set to middle
Psychovisual Trellis: slider set fully to the left
Partition Type: Default
Trellis: Default
Deblocking: Both drop-downs set to Default (0)
For those that are interested in the more nerdy side, I started off by copying Handbrake's built in "High Profile" x264 settings. I found this page, which mentions that the Xoom only supports the baseline x264 profile, so I turned off the advanced x264 stuff. However I realised that even though the hardware is the same, the Xoom is not the Vega. So started re-enabling the advanced options one by one to see if any caused a problem. The only one I found that caused any issue was weighted P-Frames, which seemed to make videos judder slightly.
Attached File(s)
Vega.plist.txt (3.52K)
Number of downloads: 521
This post has been edited by blcollier: 26 March 2011 - 01:44 PM
Click to expand...
Click to collapse
I am comparing encodes of MP4 and MKV based video files using Handbrake as the encoder and x264 as the compression type.
I am using a Samsung Galaxy S and Samsung Galaxy Tab 10.1 and the results are less than inspiring.
Using the default Video player on the Tab, MKV's stutter. Anamorphic MKV's also do not display in the correct aspect ratio. Non-Anamorphic videos are larger and display correctly but stutter.
MP4's have no such problem.
Using the default Video player on the Galaxy S, both MKV's and MP4s play without stuttering however Anamorphic videos do not display in the correct aspect ratio, but non-anamorphic videos play fine - as expected.
Dice looks like it has received an update which now actually plays correctly all formats and aspect ratios.
I'd rather find a solution to get MKV's play correctly in the correct aspect ratio without stuttering using the stock video player on both Samsung Galaxy Tab 10.1 and Samsung Galaxy S.
Any thoughts?
Thanks
Simon
Just fork out the cash for Dice player. It plays everything correctly and can be used on both devices under your account.
I think you may want to look at encoding settings.
Saw your post and it intrigued me because normally I don't use MKV files but given the fact that I sometimes watch my rips in loud areas I thought that it might be useful to have subtitles along with my rips.
So I did a little experiment taking a rip of my Cars 2 bluray that I did for my GT in MP4 format that already played well on the tab and applying an SRT to it using MKVMerge. The resulting MKV file plays well in Dice player with subtitles showing up just fine.
What settings do you use in handbrake?
For me I'm using max width of 1280 (720p), no video filters, AAC audio with a bitrate of 160, and advanced settings tab settings of 3 reference frames, 0 b-frames, CABAC off, 8x8 tranform off, p-frames off, psychovisual off and all other settings to the right at defaults.
Im using a max height of 576 and strict anamorphic (so actual width is never more than 720 but displayh size is max 1024), no cropping, no filters, x264, 160 bitrate aac audio. Im using Default settings as per the Regular > Normal profile, but bumped reference and max b frames to 3, and subpixel me & mode detection to seven.
Encode the same video, one in an MP4 container and one in MKV results in only the MKV stuttering. Same settings for both though.
Just tried that MKVMerge to Mux the MP4 to MKV and the resultant file still stutters using the stock video player app.
Dice however works flawlessly! course Im annoyed that I have to fork out £3.50 for an app that works when it should really be part of Android.
The stock player for the 10.1 doesn't support mkv (not listed as a supoprted container in the specs) that's why you get the stutter. Dice is the best and well worth your purchase. Bs player is free and is almost as good as dice but it has problems seeking during playback on mkv 's.
Thanks songmeesay - best answer I've heard. I like technical limitations like that. It's a finite answer!
So MP4 is a preferred choice on the Tab plus it handles anamorphic videos.
Do you guys have any knowledge of the Galaxy S and why that doesn't handle Anamorphic videos correctly?
Im still guessing my three choices are:
Convert to MKV Anamorphic- smaller files but need to use Dice
Convert to MP4 Anamorphic- smaller files, plays well on Tab, but will need Dice on Galaxy S
Convert to MP4 non anamorphic- larger files, but larger scope for support on the Tab, S and will of course play back in Dice...
Tricky decision. What would you guys go with?
How to Ideal way to convert MKV files to MP4 format ?
sjdean said:
I am comparing encodes of MP4 and MKV based video files using Handbrake as the encoder and x264 as the compression type.
I am using a Samsung Galaxy S and Samsung Galaxy Tab 10.1 and the results are less than inspiring.
Using the default Video player on the Tab, MKV's stutter. Anamorphic MKV's also do not display in the correct aspect ratio. Non-Anamorphic videos are larger and display correctly but stutter.
MP4's have no such problem.
Using the default Video player on the Galaxy S, both MKV's and MP4s play without stuttering however Anamorphic videos do not display in the correct aspect ratio, but non-anamorphic videos play fine - as expected.
Dice looks like it has received an update which now actually plays correctly all formats and aspect ratios.
I'd rather find a solution to get MKV's play correctly in the correct aspect ratio without stuttering using the stock video player on both Samsung Galaxy Tab 10.1 and Samsung Galaxy S.
Any thoughts?
Thanks
Simon
Click to expand...
Click to collapse
MKV to MP4 Converter is a professional conversion program with powerful functions & friendly interface. It not only can convert mkv files to mp4 format with a few clicks, but also supports converting to MPG, MPEG, MPEG2, SWF, FLV, VOB, MOD, MP4, H.264, M4V, AVI, WMV, 3GP, 3GPP, MOV, DivX, XviD, Quciktime Video, & extracting M4A, MP3, AC3, AAC, WMA, WAV, OGG from videos.
You can try this function is very powerful MKV to MP4 Converter software, there are those functions that you say, you can learn from it and see that you have no help.
More useful software introduction, please visit the following URL:
mkvtomp4 .com
.mkv container should only be used for DTS audio encodes.
Else you better off with mp4 and h.263 .xvid for compatibility reasons.
Sent from my SCH-I905 using xda app-developers app