Related
I am not the real developer of insertions. Simply wanted to show that it is possible. Very much it would be desirable to see the new MIUI version on our smartphone
For developers only
MIUI4.0.4 2.7.20 failed to start on the basis of [ROM] [Early pre-alpha] AOSP ICS 4.0.4_r2.1 for DS5.kibuuka
The new wersion MIUI 4 2.7.20 hir:http://filestore.com.ua/?d=B3B5A9749
Russian is added. Stability of a.kamer is improved doesn't work
The big request to all who can finish this insertion, make it efforts
Sorry for bad english, thanks to online translation
For an insertion it is used Google Nexus One rom :http://roms.miui.us/passion/MIUI.us_passion_v4_2.6.22_Eng_Deo_ZipA_Signed_buildbot.zip
The new version works almost everything:to look the 34 th post
USB Mass Storage for ICS (that doesn't have native UMS support (yet))version 1.2:http://forum.xda-developers.com/showthread.php?t=1389375
new
Following version of an insertion:http://uafile.com.ua/get/33295/
speed is increased,the new basis and the new MIUI version, Is rut
I will download and flash to let everyone how it runs. Thanks, Liwais.
Liwais said:
Following version of an insertion:http://uafile.com.ua/get/33295/
speed is increased,the new basis and the new MIUI version, Is rut
Click to expand...
Click to collapse
The first build hv no phone.apk, wifi not work and no data, how then this build ? Can you provide more changelog details ? It is good hv MIUI v.4 running on our device. Thank you
Sent from my PC36100 using Tapatalk 2
Still running 2.4.20 MIUI... was tempted to try ICS but now seems everyone is looking toward to Jelly bean. Only feature I care about in Jelly Bean was the voice actions.
Other than that I'll take MIUI any day.
nom051205 said:
The first build hv no phone.apk, wifi not work and no data, how then this build ? Can you provide more changelog details ? It is good hv MIUI v.4 running on our device. Thank you
Sent from my PC36100 using Tapatalk 2
Click to expand...
Click to collapse
In this version speed and graphics not to be strewed is better. Thanking new build from kibuuka
In this version too there is no phone, but the Wi-Fi works at both versions that the Wi-Fi would work it is necessary to include it in settings and to press to scan in the bottom of page, and I have to work with data, phone it is possible to establish from a market for example TouchPal Contacts.В to an assembly basis new буилд [ROM] [Early pre-alpha] of AOSP ICS 4.0.4_r2.1 for DS5. (dell_streak-ota-eng.den.070212) and new MIUI Google Nexus One MIUI.us_passion_v4_2.6.29_Eng_Deo_ZipA_Signed_buildbot version.This version already with рут the rights .Who can force to work apk and launcher apk phone a request to help!!
Excuse for my English and thanks to all
For shutdown of illumination of keys and brightness control of the screen to use the appendix:https://play.google.com/store/apps/details?id=mobi.pruss.superdim&hl=ru
streak4m3 said:
I will download and flash to let everyone how it runs. Thanks, Liwais.
Click to expand...
Click to collapse
Please. Write the opinion) I won't refuse any help in MIUI construction
The new version works almost everything
The new version works almost everything, phone, a native launcher, subjects, a market, and is a lot of another, we test and we write responses
download:http://uafile.com.ua/get/33693/
MIUI4.0.4 2.6.29 Dell Streak-Hot thing
http://narod.ru/disk/55304535001.9765abc6af956166f4cc913155ba2318/MIUI.us_DELL%20STREAK%205_v4_2.6.29.zip.html
Liwais said:
The new version works almost everything, phone, a native launcher, subjects, a market, and is a lot of another, we test and we write responses
download:http://uafile.com.ua/get/33693/
MIUI4.0.4 2.6.29 Dell Streak-Hot thing
Click to expand...
Click to collapse
How about mobile data and camera?
sinan33 said:
How about mobile data and camera?
Click to expand...
Click to collapse
the camera doesn't work, Wi-Fi works, Data works for me
ı can not download the file
When i click on download it begins to download a file called "download.bin"
sinan33 said:
ı can not download the file
When i click on download it begins to download a file called "download.bin"
Click to expand...
Click to collapse
put a tick slightly below the button to download
added the reference still
Thank you!
I am downloading now.
Looks good! Seems to have the same bugs as the other ICS ROM, but a great start nonetheless!
Liwais,
Good work, man. This latest ROM is definitely better than previous ones. Aside from the typical things that are not working, like camera, for example, the transitions and response is considerably better but obviously not ready for extensive daily use just yet. I will provide more detailed report later on. But just wanted to say "thank you" for your hard work.
Hello
Hello guys... i wanna know how to install this rom. via streakmod recovery ? or what ? pls tell me step by step procedure to make a flashing on this DS 5.
Yes, using StreakMod recovery.
1) Do a Nandroid backup.
2) Clear Dalvik, Cache and Factory Reset from StreakMod.
3) Factory reset from main recovery menu. This step isn't always necessary, but doesn't hurt.
4) Flash this zip. Also flash gapps and superuser.zip from the other ICS thread for Google Apps and root.
5) Reboot and enjoy ICS MIUI!
Sent from my Dell Streak using Tapatalk 2
Edrill said:
Yes, using StreakMod recovery.
1) Do a Nandroid backup.
2) Clear Dalvik, Cache and Factory Reset from StreakMod.
3) Factory reset from main recovery menu. This step isn't always necessary, but doesn't hurt.
4) Flash this zip. Also flash gapps and superuser.zip from the other ICS thread for Google Apps and root.
5) Reboot and enjoy ICS MIUI!
Sent from my Dell Streak using Tapatalk 2
Click to expand...
Click to collapse
Also don't forget to flash the correct version of radio and baseband if you are coming from Froyo..
???
ncik said:
Also don't forget to flash the correct version of radio and baseband if you are coming from Froyo..
Click to expand...
Click to collapse
where to download ???
Thanks Mate !
Edrill said:
Yes, using StreakMod recovery.
1) Do a Nandroid backup.
2) Clear Dalvik, Cache and Factory Reset from StreakMod.
3) Factory reset from main recovery menu. This step isn't always necessary, but doesn't hurt.
4) Flash this zip. Also flash gapps and superuser.zip from the other ICS thread for Google Apps and root.
5) Reboot and enjoy ICS MIUI!
Sent from my Dell Streak using Tapatalk 2
Click to expand...
Click to collapse
Thanks for ur reply.
I got a DS 5 from my bro yesterday and i want to flash ROMs on it.
But i still don't know after i've finished ROMs on Ds 5 , is it easy to downgrade or move back to the official ROMs?
Firstly i got this one in 2.2 and now i got updated to 2.3.3 from other xda thread. So Pls answer me whether i should try flashing these ROMs or not ? Any help appreciated..! :laugh:
(I havn't been here since 24/09 build) This might be a noob question .. I searched / read and after reading and reading it start to get confusing.
my question is .. how do I upgrade from 24/09 to lastest 2ndboot(I'm confusing about 2ndboot)
Thank you : )
Infinity02 said:
(I havn't been here since 24/09 build) This might be a noob question .. I searched / read and after reading and reading it start to get confusing.
my question is .. how do I upgrade from 24/09 to lastest 2ndboot(I'm confusing about 2ndboot)
Thank you : )
Click to expand...
Click to collapse
it seems to me you didn't read so much, or enough..
flash last unified build as always, then install the v4 update
moly82 said:
it seems to me you didn't read so much, or enough..
flash last unified build as always, then install the v4 update
Click to expand...
Click to collapse
Just like the way to upgrade nightly builds ?
Thread Move
Thread moved to the Q&A section
1. Go to Stable recovery
2. Make a Nandroid backup (highly recommended, need at least 1.4 GB free space on SD)
3. Wipe data (recommended), cache and dalvik
4. Install zip from sdcard > 18.10 ROM
5. Install zip from sdcard > update for 18.10.zip
6. Install zip from sdcard > Gapps
7. Reboot twice
Sent from my MB526 using xda app-developers app
I'm already running CM jelly bean... this is just the new updated stable one....
I guess my real question is what's the best way about flashing this rom
1) Reboot into recovery
2) Wipe data
3) Install ROM
4) Install GAAPS
5) Clear cachse/dalvik/etc.
6) reboot
?
(my volume up key doesn't work but i can get into recovery np)
yep.....seems about right.
dligon said:
yep.....seems about right.
Click to expand...
Click to collapse
Well bricked my phone (sort of)
I got the (Status 7)
installation aborted error
I used the att CM file which is compatible with the Bell version in Canada.
Can someone please help ?
Funkadelick said:
I'm already running CM jelly bean... this is just the new updated stable one....
I guess my real question is what's the best way about flashing this rom
1) Reboot into recovery
2) Wipe data
3) Install ROM
4) Install GAAPS
5) Clear cachse/dalvik/etc.
6) reboot
?
(my volume up key doesn't work but i can get into recovery np)
Click to expand...
Click to collapse
Im surprised you haven't been roasted yet for posting this in development...
Sent from my GT-I9505 using Tapatalk 2
2Tone5 said:
Im surprised you haven't been roasted yet for posting this in development...
Sent from my GT-I9505 using Tapatalk 2
Click to expand...
Click to collapse
Should be. Especially considering he posted it in q&a too
jd1639 said:
Should be. Especially considering he posted it in q&a too
Click to expand...
Click to collapse
^^THIS^^
Hi I am new to android. I decided to install CyanogenMod on my Indian sgy rooted and had stock rom with Touchwiz and android 2.3.6. So I got some instructions from here . Then I downloaded the file of around 120MB.I booted into recovery mode. I selected update from SD card and then selected CWM.zip I got from XDA thread. It entered the CWM and then I selected Format system, Clear cache and clear Dalvik cache. Then I selected the update from SD card and then selected the CM zip file of 120MB I had in my phone. It installed and then it showed no errors. After conformation I rebooted the phone. It showed Samsung Galaxy Y and then turned black with no Samsung logo. I thought it was doing something and then after 3 minutes I touched the screen it began to draw circles wherever I touched. I thought I bricked the phone. After two minutes I turned it off and then again got into recovery mode and then to CWM mode and got my phone back with Nandroid backup I had.
Was the phone installing and I interrupted it by touching it?
Is there any error on my installation steps?
Kindly reply me how to install this CM and tell me if you get the same and give me the link you used for installing CM
Apologies for poor english if you find any.
you installed cm9
to use cm9 you need to install whitexp kernel else you will have the track pad which you experienced
you should also know cm9 is not stable in this device - no network wifi data etc - all it does is boot
marcussmith2626 said:
you installed cm9
to use cm9 you need to install whitexp kernel else you will have the track pad which you experienced
you should also know cm9 is not stable in this device - no network wifi data etc - all it does is boot
Click to expand...
Click to collapse
Thank you. Could you please guide me through any other ROM or thread that could
help me to install another rom. I am not asking for a best ROM. I am just asking a more
appropriate ROM that I could use as galaxy y is not officially supported by Cyanogenmod.
Also the developer of mod said to install kernel if I restore nandroid backup using CWM will I get stock kernel back.
please don't mistake me that I am asking the best rom.
Xtreak said:
Thank you. Could you please guide me through any other ROM or thread that could
help me to install another rom. I am not asking for a best ROM. I am just asking a more
appropriate ROM that I could use as galaxy y is not officially supported by Cyanogenmod.
Also the developer of mod said to install kernel if I restore nandroid backup using CWM will I get stock kernel back.
please don't mistake me that I am asking the best rom.
Click to expand...
Click to collapse
no you will not get stock kernel back by restoring nandroid backup
to go back to stock rom/kernel you need to flash stock rom firmware via odin
This is because the kernels that support cm will format your system to ext - stock kernel does not support ext so your phone will not boot so you need to flash stock rom via odin to go back to stock
all roms including stock based cm7 and aosp are found in the dev section - read the op - full instructions are given there - if you flash a cm7 or aosp rom you will need to flash percys kernel first and reboot to recovery and format system data cache to remove mount errors
choose one that works best for you
marcussmith2626 said:
no you will not get stock kernel back by restoring nandroid backup
to go back to stock rom/kernel you need to flash stock rom firmware via odin
This is because the kernels that support cm will format your system to ext - stock kernel does not support ext so your phone will not boot so you need to flash stock rom via odin to go back to stock
all roms including stock based cm7 and aosp are found in the dev section - read the op - full instructions are given there - if you flash a cm7 or aosp rom you will need to flash percys kernel first and reboot to recovery and format system data cache to remove mount errors
choose one that works best for you
Click to expand...
Click to collapse
I will try them . Thanks for helping me out. The stock ROM are in hotfile which was shutdown I think. Any other mirrors or links to get the stock kernel and ROM?
Xtreak said:
I will try them . Thanks for helping me out. The stock ROM are in hotfile which was shutdown I think. Any other mirrors or links to get the stock kernel and ROM?
Click to expand...
Click to collapse
my sticky thread at the top of the dev section has them - please look through the dev section
here is link to my firmware thread
http://forum.xda-developers.com/showthread.php?t=2568853
marcussmith2626 said:
my sticky thread at the top of the dev section has them - please look through the dev section
here is link to my firmware thread
http://forum.xda-developers.com/showthread.php?t=2568853
Click to expand...
Click to collapse
Ok I will see them . Great work. Happy hacking
Xtreak said:
Thank you. Could you please guide me through any other ROM or thread that could
help me to install another rom. I am not asking for a best ROM. I am just asking a more
appropriate ROM that I could use as galaxy y is not officially supported by Cyanogenmod.
Also the developer of mod said to install kernel if I restore nandroid backup using CWM will I get stock kernel back.
please don't mistake me that I am asking the best rom.
Click to expand...
Click to collapse
I recomand you to install MiniRom Touchwiz http://forum.xda-developers.com/showthread.php?t=2385686
or Hyperion 8
http://forum.xda-developers.com/showthread.php?t=2457022
imElectronica said:
I recomand you to install MiniRom Touchwiz http://forum.xda-developers.com/showthread.php?t=2385686
or Hyperion 8
http://forum.xda-developers.com/showthread.php?t=2457022
Click to expand...
Click to collapse
I found the final build. I think its discontinued a few days ago correct me if I am wrong. I heard it has some wifi problems. Can we install it with stock kernel?
imElectronica said:
I recommend you to install (rest of quote removed)
Click to expand...
Click to collapse
please dont turn this thread into a best rom style recommend roms thread - whats best for you maybe not best or recommended to someone else
marcussmith2626 said:
please dont turn this thread into a best rom style recommend roms thread - whats best for you maybe not best or recommended to someone else
Click to expand...
Click to collapse
Sorry. Guess I can stop here. I downloaded hyperion 8 . Waiting for my phone to get charged.
marcussmith2626 said:
please dont turn this thread into a best rom style recommend roms thread - whats best for you maybe not best or recommended to someone else
Click to expand...
Click to collapse
I'm not telling about best....I express my opinion.....its depends upon u to use this..
---------- Post added at 11:24 AM ---------- Previous post was at 11:19 AM ----------
Xtreak said:
I found the final build. I think its discontinued a few days ago correct me if I am wrong. I heard it has some wifi problems. Can we install it with stock kernel?
Click to expand...
Click to collapse
Yes use mini rom with stock kernel....I use it for 6 month n no prob found....i use it with hellsfusion kernel n found wifi prob but it works smooth with stock kernel.....this is a stable one. this is my fav. rom i ever use.
Sorry, this thread is now closed.
I would suggest you to move this thread to the General Disucssion section
Moved.
well I think I found a bug so twrp thinks there is no os installed and the browser doesnt work and when you try to flash gapps for 7.1 it doesnt work how do we fix this
williambright80 said:
well I think I found a bug so twrp thinks there is no os installed and the browser doesnt work and when you try to flash gapps for 7.1 it doesnt work how do we fix this
Click to expand...
Click to collapse
For which ROM u talking about?? Aosp espressos'
Kunal Gautam said:
For which ROM u talking about?? Aosp espressos'
Click to expand...
Click to collapse
yes
TWRP :-OK it isn't that severe to be called a bug
GApps:- I know its a problem with the ROM that it doesn't deal with opengapps but still you can try PA GApps they are working fine with the ROM.
Thanks
Kunal Gautam said:
TWRP :-OK it isn't that severe to be called a bug
GApps:- I know its a problem with the ROM that it doesn't deal with opengapps but still you can try PA GApps they are working fine with the ROM.
Thanks
Click to expand...
Click to collapse
which gapps
link me to 7.1 ROM you promised, ty.
Boscep said:
link me to 7.1 ROM you promised, ty.
Click to expand...
Click to collapse
here is the link to 7.1 https://builds.unlegacy-android.org/aosp-7.1/espresso/ua_espresso-7.1.1-20170227.zip
Is this for pad 2 gt-p5100
JPSimon said:
Is this for pad 2 gt-p5100
Click to expand...
Click to collapse
Yes but to avoid confusion please call it by galaxy tab 2 10.1
hello @CCD
how are you?
comeback pls
tab 2 needs more dev, ty.
UPDATE 2.0
Builds are almost ready CM 14.1 once my exams are completed will start to test them.... Dont know why but still camera bug carry on almost no lags..... + CyanogenMod Features....
JPSimon said:
Is this for pad 2 gt-p5100
Click to expand...
Click to collapse
It could be but right now i haven't updated my device tree
For P3100's right now but i will do it soon but it could be faster if you could help me updating
williambright80 said:
which gapps
Click to expand...
Click to collapse
Sorry my mistake PA Gapps are now discontinued instead of them you could download dynamic gapps
Link-https://forum.xda-developers.com/android/software/gapps-dynamic-gapps-t3487192
Kunal Gautam said:
Introduction
At the end of 2016 I started to seek nougats for Tab 2, found AOSP by Ziyan and Android - Andi
flashed it, examined it, Discontinued it......
Here we gonna discuss it.
What is the need?
Tab 2 was released in 2012 and in mid 2014 was discontinued by Samsung thus resulted to get this to be called OLD but in my eyes its still new with great potential and great reliability so I just want to keep this device alive till 2019. So that's the reason....
CURRENT STATE
Nougat development is doing well and with the help of you I can or all devs can make it better.....
So just because of this learned porting and started porting, successfully ported 4 out 5 ROMs will upload them all......
DEVELOPING CIRCLE
Roms that are being supported by me are :-
AOSP
Lineage OS
AICP
Resurrection Remix
Thanks To @[email protected]
SlimKat Roms
CyanogenMod
LineageOS
You
Me of course
Click to expand...
Click to collapse
So hey, i'm nee to this forum and rooting in general but i will glad if some of you could help me out of this, here's the deal: i saw that AOSP roms are the best for performance (right?) and i also want the lastet version of android so that rom fit perfectly my needs, where i can download it? And is compatibile with my tab 2 10.1 WiFi only? Also where the hell is the guide to root that Device, i saw it once and i never found it back... (yeah i'm probably stupid)
LordReaperIV said:
So hey, i'm nee to this forum and rooting in general but i will glad if some of you could help me out of this, here's the deal: i saw that AOSP roms are the best for performance (right?) and i also want the lastet version of android so that rom fit perfectly my needs, where i can download it? And is compatibile with my tab 2 10.1 WiFi only? Also where the hell is the guide to root that Device, i saw it once and i never found it back... (yeah i'm probably stupid)
Click to expand...
Click to collapse
No need for guide
Steps
1. Download KingRoot.
2. Install it.
3. Root your device with it.
4. Enjoy
TO INSTALL CUSTOM RECOVERY TO INSTALL CUSTOM ROMS
1. Download official TWRP app from the Play Store.
2. Install recovery using the information on the screen.
INSTALL THE MODDED RECOVERY PLZ IF YOU DONT WANT TO GET YOU DEVICE BRICKED
1. Go to google search andi github
2. Open it
3. Go to the recovery section and then in TWRP download the common recovery and install the downloaded recovery using the current TWRP recovery
And AOSP are good but actually for Tab 2 it is really unstable right now. But if you really want to install it
Just go in the Tab 2 Development section
The AOSP must on top there will be links to the website
Just go to directory when you visit downloading website
AOSP 7.1/espresso/Download the latest one
And just copy to you device
Then go to the recovery (Power + Volume Up)
Then go into wipe/anvanced
Select
1. DALVIK
2. CACHE
3. SYSTEM
4. DATA
Then wipe
Then install the Rom
TADA Done than just reboot.
Kunal Gautam said:
No need for guide
Steps
1. Download KingRoot.
2. Install it.
3. Root your device with it.
4. Enjoy
TO INSTALL CUSTOM RECOVERY TO INSTALL CUSTOM ROMS
1. Download official TWRP app from the Play Store.
2. Install recovery using the information on the screen.
INSTALL THE MODDED RECOVERY PLZ IF YOU DONT WANT TO GET YOU DEVICE BRICKED
1. Go to google search andi github
2. Open it
3. Go to the recovery section and then in TWRP download the common recovery and install the downloaded recovery using the current TWRP recovery
And AOSP are good but actually for Tab 2 it is really unstable right now. But if you really want to install it
Just go in the Tab 2 Development section
The AOSP must on top there will be links to the website
Just go to directory when you visit downloading website
AOSP 7.1/espresso/Download the latest one
And just copy to you device
Then go to the recovery (Power + Volume Up)
Then go into wipe/anvanced
Select
1. DALVIK
2. CACHE
3. SYSTEM
4. DATA
Then wipe
Then install the Rom
TADA Done than just reboot.
Click to expand...
Click to collapse
Awesome dude, thanks for the tips, i'll wait that my tabet charge will be over 80% (just for safety) and the i'll root it. I downloaded both ".tar.md5" and ".zip" file but when i go to choose the file with TWRP in the directory that i put them, the app explorer don't see them... -> update, the TWRP app let me see only the 2..8.5.0 version of recovery, while the site on github start from 3.x.x.x. also i tried to flash the img files extracted from the 3.x.x.x. recoveries and it told me "flash failed".
Also my Galaxy Tab 2 just crashed while rooting with Kingroot (it was trying the could method) -> EDIT: i reset it and when i open the kingroot app it start from where it left , it was a "crash" because the stock rom have not the reboot function?
BTW i thought, you said that galaxy tab 2 is unstable, but i remember that the first stock rom was very well optimized with no lag, then i updated it via samsung and then it come to lag and IT IS VERY SLOW. so you mean that installing a custom rom will not solve the problem?
[b]"need alpha testers for cm 14.1"[/b]
Alpha testers wanted for CM 14.1
1st Build releasing today.. Stay Tuned!!!