Need Help to restore build.prop on i337 NC1 firmware - AT&T Samsung Galaxy S 4 Q&A, Help & Troubleshootin

Well, this is my problem: Last day I was trying to delete carrier name from top left notifications bar, so I found a thread that shows how to do it, specifically modifying 3 lines of build.prop system file. After doing this my phone won't boot up anymore. It shows Samsung Galaxy S4 logo an then stays black.
My phone has stock firmware i337UCUFNC1, and rooted with towelroot.
Actually I am only able to get to stock recovery and download mode.
I've tried some options but getting no results since bootloader its locked I guess.
I made a backup of the original build.prop, but unfortunately I had no external sdcard at that moment, so the backup its on internal memory.
Any ideas where to get this solutions? Adb? Flashing bootloader?

There's always Odin. You're not going to be able to use adb with the stock recovery.
Sent from my Nexus 5 using XDA Free mobile app

jd1639 said:
There's always Odin. You're not going to be able to use adb with the stock recovery.
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks for your answer.
Well, I bet I did'nt use the proper stock firmware via odin, it fails at begining. I've tried with MDB and NB1 stock but get fail after NAND writes start (Auth). Until now I Can't find NC1 stock to flash it.

Any other suggestion to bring my phone back?

j3ssipr said:
Any other suggestion to bring my phone back?
Click to expand...
Click to collapse
Did you use the nb1 tar file from this
http://forum.xda-developers.com/showthread.php?p=53758227
It's the only firmware that'll work
Sent from my Nexus 5 using XDA Free mobile app

Yes, actually I'm downloading that NB1 to test it.

jd1639 said:
Did you use the nb1 tar file from this
http://forum.xda-developers.com/showthread.php?p=53758227
It's the only firmware that'll work
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Everything good now. My phone it's back with NB1 fw. Thanks a lot.
How yoy knew this one will work?

j3ssipr said:
Everything good now. My phone it's back with NB1 fw. Thanks a lot.
How yoy knew this one will work?
Click to expand...
Click to collapse
Glad your got it working I knew because I've been around
Sent from my Nexus 5 using XDA Free mobile app

Related

Can I remove TWRP without odin?

I have to swap my phone, one problem is that you cannot connect the phone to a computer.
Can I remove TWRP and restore the original recovery without ODIN? Maybe flash the firmware if there is a zip version using recovery?
I belive toy can use Mobile odin. There may also be a flashable zip.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
billinaz said:
I have to swap my phone, one problem is that you cannot connect the phone to a computer.
Can I remove TWRP and restore the original recovery without ODIN? Maybe flash the firmware if there is a zip version using recovery?
Click to expand...
Click to collapse
I swapped my phone, rooted and TWRP installed. Not one phone call. Not one charge. That was on AT&T.
But if you wanna be safe, do what he^^ suggested.
Sent from my Galaxy S4 using Tapatalk
danny39 said:
I swapped my phone, rooted and TWRP installed. Not one phone call. Not one charge. That was on AT&T.
But if you wanna be safe, do what he^^ suggested.
Sent from my Galaxy S4 using Tapatalk
Click to expand...
Click to collapse
I think I should try that just to be safe. Do I need to flash the entire rom ( Im on amdl) or just the stock recovery?
Just the stock recovery. Best thing to do is to search the forums for triangle away, flash your stock recovery after running triangle away. Follow the prompts for that, btw. Then use SuperSU's built in unroot.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
graydiggy said:
Just the stock recovery. Best thing to do is to search the forums for triangle away, flash your stock recovery after running triangle away. Follow the prompts for that, btw. Then use SuperSU's built in unroot.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks! Im searching for the stock recovery now....I have the amdl firmware but not the recovery.
Any idea where I can grab it?
Is the firmware a zip or an odin file?
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
graydiggy said:
Is the firmware a zip or an odin file?
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5
mobile odin is saying that the device isnt compatible? It asks for a dump, I did that and it said successful.
I restarted the phone, and it still says the same thing?
Looks like mobile odin is not supported for the AT&T Model.
billinaz said:
I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5
Click to expand...
Click to collapse
You could extract the recovery.img from the tar and then create a zip file from that. I think it would work, but I've never tried it.
I guess the only thing I can do now is either find an AMDL firmware or stock recovery that I can use a zip file to flash it using TWRP.....
Has anyone seen this anywhere?
billinaz said:
I guess the only thing I can do now is either find an AMDL firmware or stock recovery that I can use a zip file to flash it using TWRP.....
Has anyone seen this anywhere?
Click to expand...
Click to collapse
Sammobile.com has the stock firmware. You'll have to register but it's free. You'll download a zip file. Use 7-zip to extract the .tar.md5 file from it. Use that in odin.
jd1639 said:
Sammobile.com has the stock firmware. You'll have to register but it's free. You'll download a zip file. Use 7-zip to extract the .tar.md5 file from it. Use that in odin.
Click to expand...
Click to collapse
That would be good except I cannnot connect to a computer.
Can I use the zip file and flash it using TWRP
billinaz said:
That would be good except I cannnot connect to a computer.
Can I use the zip file and flash it using TWRP
Click to expand...
Click to collapse
I don't know of any way to do it without a computer. Why can't you connect to a computer?
jd1639 said:
I don't know of any way to do it without a computer. Why can't you connect to a computer?
Click to expand...
Click to collapse
There is something wrong with the phone, Im sending it back to ATT for a replacement.
billinaz said:
There is something wrong with the phone, Im sending it back to ATT for a replacement.
Click to expand...
Click to collapse
You should be ok, I don't think they really check anything. You might do more harm right now than its worth. I've sent two devices into them. Got a refurb back. Your biggest worry is it'll probably be mf3 firmware.
jd1639 said:
You should be ok, I don't think they really check anything. You might do more harm right now than its worth. I've sent two devices into them. Got a refurb back. Your biggest worry is it'll probably be mf3 firmware.
Click to expand...
Click to collapse
Did you send them rooted with TWRP still there?
I alradyhave resigned myself to getting stuck with the MF3 firmware. Hopefully that gets worked out soon!
billinaz said:
Did you send them rooted with TWRP still there?
I alradyhave resigned myself to getting stuck with the MF3 firmware. Hopefully that gets worked out soon!
Click to expand...
Click to collapse
Yes, but mine wouldn't boot so it would have been hard to tell what was on it.
billinaz said:
Did you send them rooted with TWRP still there?
I alradyhave resigned myself to getting stuck with the MF3 firmware. Hopefully that gets worked out soon!
Click to expand...
Click to collapse
Did you return yours too with TWRP still on it? Mine just started not charging or connecting to the PC... :banghead:
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Yes, I did.
Either they didnt see it or they didnt care.

[Q] Noob problems with my I337

Hi everyone, I have been a fan of the xda website for a long time and you guys have always helped me solve my problems with my phones.
This is the first time I need something that I havenĀ“t been able to find. Forgive me if it is already answered but I cannot find it.
Basically my problem is that I was trying to rom my phone for the first time and it failed.... miserably. I did not brick my phone; it still works, starts up and functions normally except for a few key things: a few programs do not function any more, most notably the wifi, contacts and dialer app, the lock screen widgets and some others.
What I did was installed safestrap, then downloaded the gravitron rom. I put everything in the right place, created the extra rom slot, then is where the noob came in. I forgot to switch over to the rom slot and instead installed over the main rom... Wow much noob, right?
Anyway, what I want to know is if there is any way to salvage my phone? I am on baseband mf3 and with the research I have done, I have concluded I am screwed until odin files for mf3 come out. But if there is any way I can get my phone back to normal I would appreciate it so very much.
Thank you all in advance for your help. I apologize if i have left anything out but I will give any info on request.
No love for the guy with busted wi-fi?
Please help me! I'm killing my data plan... and it's really annoying to not be able to use my dialer or contacts.
Zytiko said:
No love for the guy with busted wi-fi?
Please help me! I'm killing my data plan... and it's really annoying to not be able to use my dialer or contacts.
Click to expand...
Click to collapse
Sounds like you're on mf3 firmware? If so, I'd flash that firmware and start over. Google mf3 tar files xda
If on MF3 you will need to flash the modules provided in the development thread. If on MK2, you will need to manually place them because there is no flashable modules yet AFAIK. No need to start from scratch unless you want it back to complete stock.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
jd1639 said:
Sounds like you're on mf3 firmware? If so, I'd flash that firmware and start over. Google mf3 tar files xda
Click to expand...
Click to collapse
I am on mf3 baseband, i forgot to add that to the op.
I have tried flashing them with odin already, it instantly fails. Though I did it again just now to be sure with the same results.
Any other suggestions?
You don't flash the modules in Odin... You flash them in the SS recovery.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
graydiggy said:
You don't flash the modules in Odin... You flash them in the SS recovery.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
How would I go about doing that? I have tried copying the jellybean folder from the mf3 tar files on to my phone and going to install in SafeStrap, but I cannot install them as they dont even appear. Should I be going to a different place to install?
The modules are in the SS development thread. It is a zip file.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
graydiggy said:
The modules are in the SS development thread. It is a zip file.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Ahhh fantastic, you're a lifesaver! My wifi works now! Woot!
So now, is there any way I can get my phone back to stock? because my calendar and my dialer and contacts still don't work for me...
I think something happened when i installed the rom over my stock rom. whoops.
There are MF3 tar files. You can flash with Odin.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
graydiggy said:
There are MF3 tar files. You can flash with Odin.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Ok that's the one I was trying to do but it fails instantly. I downloaded the mf3 tar files from xda, loaded them up like the thread suggested, put the phone into recovery mode but it instantly fails.
Any thoughts on why?
Drivers, USB port, cable. My money is on drivers though. Check all three.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app

[Q] Which bootloader do I have?

Is there any easy way to tell without being able to boot fully? There isn't anything immediately obvious on google. I'm trying to help out a friend, his phone doesn't get past the boot animation anymore and he doesn't know which version he has. I can boot into download/recovery modes but don't see anything that screams MF3, MK2 or any of the others.
Updates: I can get to sideload but don't know if I can install any Roms through sideload without a custom recovery. The recovery right now is stock 3e I think.
StevenInMichigan said:
Is there any easy way to tell without being able to boot fully? There isn't anything immediately obvious on google. I'm trying to help out a friend, his phone doesn't get past the boot animation anymore and he doesn't know which version he has. I can boot into download/recovery modes but don't see anything that screams MF3, MK2 or any of the others.
Updates: I can get to sideload but don't know if I can install any Roms through sideload without a custom recovery. The recovery right now is stock 3e I think.
Click to expand...
Click to collapse
Can't do anything from there. If recovery doesn't say NB1 in the corner then it's something before that. Only other way is to just try and flash only part of each one through Odin.
Sent from my SGH-I337 running GPE
DeadlySin9 said:
Can't do anything from there. If recovery doesn't say NB1 in the corner then it's something before that. Only other way is to just try and flash only part of each one through Odin.
Sent from my SGH-I337 running GPE
Click to expand...
Click to collapse
OK well it isn't nb1 so that's good I guess. Which part should I be flashing in odin? I can brick it by flashing an older version through Odin than is currently on there, can't I?
StevenInMichigan said:
OK well it isn't nb1 so that's good I guess. Which part should I be flashing in odin? I can brick it by flashing an older version through Odin than is currently on there, can't I?
Click to expand...
Click to collapse
no, you can't brick. Odin will just fail
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
no, you can't brick. Odin will just fail
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Excellent to hear. Guess I'll just start with the oldest I can get and work my way newer.
StevenInMichigan said:
Excellent to hear. Guess I'll just start with the oldest I can get and work my way newer.
Click to expand...
Click to collapse
Has your friend ever had a custom recovery on, twrp or cwm? Or flashed any custom roms?
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Has your friend ever had a custom recovery on, twrp or cwm? Or flashed any custom roms?
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
He was rooted at one point and then unrooted. Never any custom roms/recoveries. The phone was working after he unrooted it but for some reason will no longer pass the boot animation.
He was on android 4.3 so does that only correspond to MK2? As far as I can tell it does.
StevenInMichigan said:
He was rooted at one point and then unrooted. Never any custom roms. The phone was working after he unrooted it but for some reason will no longer pass the boot animation.
Click to expand...
Click to collapse
Do you know if he took any ota updates? My opinion is you should just flash the nb1 tar file in Odin. It's doesn't sound like he is still on mdl firmware.Which would be the only reason he'd not want to go to nb1
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Do you know if he took any ota updates? My opinion is you should just flash the nb1 tar file in Odin. It's doesn't sound like he is still on mdl firmware.Which would be the only reason he'd not want to go to nb1
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
If my goal is to get CM or any other aosp based rom on the phone will nb1 be any more restrictive than MK2? I haven't found anything breaking the differences between MKx/Nxx down yet.
StevenInMichigan said:
If my goal is to get CM or any other aosp based rom on the phone will nb1 be any more restrictive than MK2? I haven't found anything breaking the differences between MKx/Nxx down yet.
Click to expand...
Click to collapse
If he's not on mdl you're not going to get cm or any aosp rom. Nb1 is no more restrictive than mf3, or mk2. In any case you'll have to use safestrap and only touch wiz based roms.
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
If he's not on mdl you're not going to get cm or any aosp rom. Nb1 is no more restrictive than mf3, or mk2. In any case you'll have to use safestrap and only touch wiz based roms.
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Is there no odin flashable mdl file? I found a link to a tmobile one but since it's not the same phone I'm not about to try and flash that without checking. http://forum.xda-developers.com/showthread.php?t=2258628 <- TMobile, not ATT but linked from ATT faq thread.
StevenInMichigan said:
Is there no odin flashable mdl file? I found a link to a tmobile one but since it's not the same phone I'm not about to try and flash that without checking. http://forum.xda-developers.com/showthread.php?t=2258628 <- TMobile, not ATT but linked from ATT faq thread.
Click to expand...
Click to collapse
Go to sammobile.com
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Go to sammobile.com
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks for all the help c:
StevenInMichigan said:
Thanks for all the help c:
Click to expand...
Click to collapse
No problem
Sent from my Nexus 5 using XDA Free mobile app

[Q] 4.3 MJ6 brick problem.

Okay so here is my problem:
-Bought AT&T phone off ebay Hong Kong. Using phone in Australia.
-SGH-I337
-4.3 MJ6
-Rooted it.
-Installed Safestrap.
-Backed up with Safestrap.
-Flashed GOLDENEYE v49.1
-*BRICKED*
-Safestrap recovery is GONE
-Stock recovery and download modes BOTH still work. When booted, the phone gets stuck on the Samsung logo/pulsating blue LED.
I've spent around 5 hours reading everything I can, but can't seem to find much regarding 4.3 MJ6.
Do I need to flash a 100% stock 4.3 MJ6 ROM to get up and running again? Does anybody know where I can find that ROM?
I've been using custom ROMs on HTCs for a couple of years, this is my first Samsung.
Thanks in advance.
jks8496956 said:
Okay so here is my problem:
-Bought AT&T phone off ebay Hong Kong. Using phone in Australia.
-4.3 MJ6
-Rooted it.
-Installed Safestrap.
-Backed up with Safestrap.
-Flashed GOLDENEYE v49.1
-*BRICKED*
-Safestrap recovery is GONE
-Stock recovery and download modes BOTH still work. When booted, the phone gets stuck on the Samsung logo/pulsating blue LED.
I've spent around 5 hours reading everything I can, but can't seem to find much regarding 4.3 MJ6.
Do I need to flash a 100% stock 4.3 MJ6 ROM to get up and running again? Does anybody know where I can find that ROM?
I've been using custom ROMs on HTCs for a couple of years, this is my first Samsung.
Thanks in advance.
Click to expand...
Click to collapse
Do you have an i337m? If you do you don't need safestrap. Go to sammobile.com and download the latest firmware and flash that in Odin. It should get you up an running again.
Sent from my Nexus 9 using XDA Free mobile app
jd1639 said:
Do you have an i337m? If you do you don't need safestrap. Go to sammobile.com and download the latest firmware and flash that in Odin. It should get you up an running again.
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
Model is SGH-I337 no 'm' in the model number.
KIES does not accept the phone serial number, btw.
Thanks.
jks8496956 said:
Model is SGH-I337 no 'm' in the model number.
KIES does not accept the phone serial number, btw.
Thanks.
Click to expand...
Click to collapse
When you boot into download mode what does it say your device is? Mj6 is not firmware for the i337
Sent from my Nexus 9 using XDA Free mobile app
jd1639 said:
When you boot into download mode what does it say your device is? Mj6 is not firmware for the i337
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
It says 'SGH-I337'
It's definitely MJ6, it seems to be an uncommon one which is a pita to work with.
Thanks.
jks8496956 said:
It says 'SGH-I337'
It's definitely MJ6, it seems to be an uncommon one which is a pita to work with.
Thanks.
Click to expand...
Click to collapse
Ok, here's what I'd do, flash the nb1 tar file in Odin. It should get your device up and running again. http://forum.xda-developers.com/showthread.php?p=50912149. You'll have to re-setup everything again afterwards so backup first.
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Ok, here's what I'd do, flash the nb1 tar file in Odin. It should get your device up and running again. http://forum.xda-developers.com/showthread.php?p=50912149. You'll have to re-setup everything again afterwards so backup first.
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
I will try this now, thank you very much.
Worked a treat, I owe you a beer/donation.
jks8496956 said:
Worked a treat, I owe you a beer/donation.
Click to expand...
Click to collapse
Glad you got it working.
Sent from my Nexus 9 using XDA Free mobile app

[Q] Couple of Queries, plz help

I have acquired an S4 i337 from At&t, it's on the MF3 4.2.2, i have used towel root to root it and installed safestrap as well...
i wanted to upgrade to 4.4, should i just odin the firmware onto it by putting it into download mode? which 4.4 is best for it in terms of stability and stuff...? i think only stock touchwiz is recommended since i don't know whether it's bootloader is locked or not...
second
can i root the 4.4 through towel root easily or is there a problem with it... which in your opinion is the best for the i337? I won't be able to downgrade again yeah?
I would flash the nb1 tar file in Odin and then go from there. You can root everything including oc3. Read through this and you'll find ask your answers, http://forum.xda-developers.com/showthread.php?p=53758227
Sent from my Nexus 9 using XDA Free mobile app
jd1639 said:
I would flash the nb1 tar file in Odin and then go from there. You can root everything including oc3. Read through this and you'll find ask your answers, http://forum.xda-developers.com/showthread.php?p=53758227
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
thank you for replying, that's very helpful. Also if i may, i need to flash 4.3 before 4.4 or just go directly towards 4.4?
since it says from any base... ?
it's just downloading the firmware (NB1) then putting the phone into download mode, start Odin and wait for the phone to reboot? that's it?
jafferkhan said:
thank you for replying, that's very helpful. Also if i may, i need to flash 4.3 before 4.4 or just go directly towards 4.4?
since it says from any base... ?
it's just downloading the firmware (NB1) then putting the phone into download mode, start Odin and wait for the phone to reboot? that's it?
Click to expand...
Click to collapse
Yes it's as simple as that. Put the tar in PDA or AP slot depending on what version of Odin you're using. Only have f.reset and auto reboot checked.
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Yes it's as simple as that. Put the tar in PDA or AP slot depending on what version of Odin you're using. Only have f.reset and auto reboot checked.
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
so i can flash 4.4.2 directly from 4.2.2?
jafferkhan said:
so i can flash 4.4.2 directly from 4.2.2?
Click to expand...
Click to collapse
Yes you can with Odin, but do your know the bootloader version of 4.2.2 you're on? If you're on mdb or mdl you probably don't want to update. On 4.2.2 you can use twrp or cwm custom recoveries and flash any roms your want. Once you're on 4.4.4 you'll be limited.
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Yes you can with Odin, but do your know the bootloader version of 4.2.2 you're on? If you're on mdb or mdl you probably don't want to update. On 4.2.2 you can use twrp or cwm custom recoveries and flash any roms your want. Once you're on 4.4.4 you'll be limited.
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
okay that's kinda uncool of samsung to lock the bootloader, how would i know which bootloader i have? how do i check? i have installed safestrap by the way... any help?
jafferkhan said:
okay that's kinda uncool of samsung to lock the bootloader, how would i know which bootloader i have? how do i check? i have installed safestrap by the way... any help?
Click to expand...
Click to collapse
Go into setting, about device. Look at the last three characters build number. That's a good indication of what your bootloader is. If your rooted the best way is in a terminal emulator type
su
getprop ro.bootloader
Sent from my Nexus 9 using XDA Free mobile app
OK I did that it says MF3 in the last three for the build number...
And thanks again man for helping me out... I really appreciate it
jafferkhan said:
OK I did that it says MF3 in the last three for the build number...
And thanks again man for helping me out... I really appreciate it
Click to expand...
Click to collapse
Ok, mf3 already has a bootloader that you can't do much with. Definitely update to nb1 by flashing the tar file in Odin.
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Ok, mf3 already has a bootloader that you can't do much with. Definitely update to nb1 by flashing the tar file in Odin.
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
so will have to unlock the phone for carriers after i upgrade to NB1?
jafferkhan said:
so will have to unlock the phone for carriers after i upgrade to NB1?
Click to expand...
Click to collapse
If the device is already sim unlocked it'll remain so after flashing the stock firmware.
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
If the device is already sim unlocked it'll remain so after flashing the stock firmware.
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
first of all, i wanted to thank you for your swift replies and help, you've been very generous, thank you ...
final question, is 4.4.2 a good upgrade from 4.2.2? is it worth it? i've read 4.4.2 had some issues with the S4... should i remain on 4.2 or upgrade to 4.4? what do you suggest? i've got the firmware (NB1) downloaded alongwith Odin... should i go for it?
jafferkhan said:
first of all, i wanted to thank you for your swift replies and help, you've been very generous, thank you ...
final question, is 4.4.2 a good upgrade from 4.2.2? is it worth it? i've read 4.4.2 had some issues with the S4... should i remain on 4.2 or upgrade to 4.4? what do you suggest? i've got the firmware (NB1) downloaded alongwith Odin... should i go for it?
Click to expand...
Click to collapse
I would. It has bug fixes and you can update to lollipop if you want. You can still have root and safestrap if you want. There really is no downside to it.
Sent from my Nexus 5 using XDA Free mobile app
Hey man just wanted to say thanks for your guidance. You've been very helpful. I'm running 4.4.2 and it's great, smoother and better than 4.2.2... Thanks for the prompt replies.
Cheers
Sent from my SAMSUNG-SGH-I337 using XDA Free mobile app
jafferkhan said:
Hey man just wanted to say thanks for your guidance. You've been very helpful. I'm running 4.4.2 and it's great, smoother and better than 4.2.2... Thanks for the prompt replies.
Cheers
Sent from my SAMSUNG-SGH-I337 using XDA Free mobile app
Click to expand...
Click to collapse
Glad it's working for you
Sent from my Nexus 5 using XDA Free mobile app
I'm glad you were around to assist me. I know I'm bad but could you tell me about the the S5 launcher? Can I use it on the stock NB1? Also another thing, is it true the Nj4 is better than NB1?
Sent from my SAMSUNG-SGH-I337 using XDA Free mobile app

Categories

Resources