So this morning, on my ATT GS4 NC1, I went into safestrap and created a new installation on rom slot 1. I guess that's what you call it. I pressed rom slot 1, then wiped, then installed hyperdrive. The install went fine and afterwards, I installed the NC1 module.zip and the SU zip file (both found in the "all things att" thread under "NC1 instructions".
Once it was done, I rebooted but what it did was boot to the regular stock rom. All my screens were the same (app placements, settings, etc) but I noticed I had no cell signal. I went to settings>mobile network and it said something about needing to install a sim card. Sorry I can't remember exactly what it said.
Anyhow, I went into safestrap, rebooted and then activated the stock rom slot and booted. Everything is fine.
What happened? Any ideas as to what happened? As of right now, I am running on the stock slot using the stock rom pending suggestions from you all.
Thanks!
KitKat ROMs will work only when flashed to stock slot.
jmjoyas said:
KitKat ROMs will work only when flashed to stock slot.
Click to expand...
Click to collapse
Ok, that makes sense. I just did it using the stock slot and it works. thanks!
burgertime78 said:
Ok, that makes sense. I just did it using the stock slot and it works. thanks!
Click to expand...
Click to collapse
Hmm I've been wondering this since I've not had success in doing so either. So what your saying is that it HAS to be done on STOCK slot in order for the rom to work? I've been scratching my head to why it refused to work for me. So it's safe? I had accidentally erased my stock rom cause I wiped that slot by mistake. So what's the procedure? Wipe the stock slot then install the rom on it then reboot? And how would I go about getting the stock back by clearing it again and installing the back up on the same slot? Please enlighten us cause I already got stuck on the black galaxy screen losing the safestrap and I had to odin the stock tar again.
I'm on NB1 4.4.2 and off course SS 3.72 beta. Thanks.
Wanabedev83 said:
Hmm I've been wondering this since I've not had success in doing so either. So what your saying is that it HAS to be done on STOCK slot in order for the rom to work? I've been scratching my head to why it refused to work for me. So it's safe? I had accidentally erased my stock rom cause I wiped that slot by mistake. So what's the procedure? Wipe the stock slot then install the rom on it then reboot? And how would I go about getting the stock back by clearing it again and installing the back up on the same slot? Please enlighten us cause I already got stuck on the black galaxy screen losing the safestrap and I had to odin the stock tar again.
I'm on NB1 4.4.2 and off course SS 3.72 beta. Thanks.
Click to expand...
Click to collapse
Not really sure how 'safe' it is. What I did was use safe strap to create rom slot 1 and installed the rom there. It didn't work so I just went back and installed the rom in the 'stock' slot the same way - wiping first. that worked.
before I did anything, I did a full backup in safestrap. I backed up to my SD card. I'm glad I did because the rom I installed - hyperdrive - did a couple things I didn't like so I was able to reboot to recover(safestrap) and restore my backup to the stock slot. now I am back the way I Was before I messed around.
I'm still looking at other roms but I feel good I Was able to restore the backup.
here are the steps I took (I'm a noob, this may not be perfect)
1) boot to recovery in safestrap
2) make sure 'stock' is active - this means that the 'install button' is red
3) perform advanced wipe on stock slot - all but external sd card
4) press 'install' and install the rom
5) exit installer and then install NC1 ATT module
6) then install SU module
7) reboot - all is good
Awesome!
burgertime78 said:
Not really sure how 'safe' it is. What I did was use safe strap to create rom slot 1 and installed the rom there. It didn't work so I just went back and installed the rom in the 'stock' slot the same way - wiping first. that worked.
before I did anything, I did a full backup in safestrap. I backed up to my SD card. I'm glad I did because the rom I installed - hyperdrive - did a couple things I didn't like so I was able to reboot to recover(safestrap) and restore my backup to the stock slot. now I am back the way I Was before I messed around.
I'm still looking at other roms but I feel good I Was able to restore the backup.
here are the steps I took (I'm a noob, this may not be perfect)
1) boot to recovery in safestrap
2) make sure 'stock' is active - this means that the 'install button' is red
3) perform advanced wipe on stock slot - all but external sd card
4) press 'install' and install the rom
5) exit installer and then install NC1 ATT module
6) then install SU module
7) reboot - all is good
Click to expand...
Click to collapse
Holy freaking crap dude thanks! I had feeling that was the way to do it. Thanks allot man, I'm currently organizing the folders, widgets and what not so i don't have to do it again if anything. I'll venture into it tomorrow. Again thanks! You answered a long awaited question.
Just tried a tmobile rom using a "SuperSU-v1.93.Zip" and got caught in a bootloop on the set up screen and even after on the main screen. Is that the same zip you used? If not can you link me? I wonder what the hell or if anyone else has been successful with a Damn tmobile rom, i used (the warp drive rom and 2 others on the list). God it was so cool when i saw the tmobile boot screen, ugh. And to make matters worse i found out that i have a faulty motherboard with the (no Sim, phone will reboot message). Damn I'm loving this stuff, just been running into some bad luck.
Related
So.. After owning this phone for a year, I still love it to death..
But after many roms and such its been kinda slowing down on me..
what I would like to do, because I heard it helps a lot, is to revert back to the original software, then put a rom on fresh..
I'm running Synergy Rom now.. And it just locked on me.. It keeps rebooting, so I figure now is the time I do this..
Questions..
I will no have to lose my root? right?
How do I do this now? I'm using clockwork and assume I put the original rom(or zip?) on my sdcard, then go into recovery, and run it?
Correct?
I also ran a script file (v6supercharged)
I assume I will have to redo that as well?
Thanks guys!!
Have no phone right now, so would like to get started asap..
Again!! MUCH THANKS!!
As long as you fully wipe using Amon Ra, you should be able to make most updated ROMs run fast on your phone. Perhaps try reflashing Synergy. I also recommend flashing a new ROM, but reinstalling apps without data. Perhaps that is contributing to the sluggishness.
Sent from my PC36100 using XDA App
Thanks.. But I've been told over and over, its sometimes good to revert back to stock..
Wipe/clear, Install stock rom (or its an .exe. or something?) then wipe/clear again, and put the rom on..
Anyone have the stock file??
Do I let it update or no ??
fastfed said:
Wipe/clear, Install stock rom (or its an .exe. or something?) then wipe/clear again, and put the rom on..
Click to expand...
Click to collapse
That's ridiculous. A wipe is a wipe.
In fact, using the RUU (.exe) is riskier since it flashes radios and such, and if something goes wrong during, you have a bricked phone. Just do a full wipe including cache/dalvik cache and install your ROM of choice, along with a good kernel.
fastfed said:
So.. After owning this phone for a year, I still love it to death..
But after many roms and such its been kinda slowing down on me..
what I would like to do, because I heard it helps a lot, is to revert back to the original software, then put a rom on fresh..
I'm running Synergy Rom now.. And it just locked on me.. It keeps rebooting, so I figure now is the time I do this..
Questions..
I will no have to lose my root? right?
How do I do this now? I'm using clockwork and assume I put the original rom(or zip?) on my sdcard, then go into recovery, and run it?
Correct?
I also ran a script file (v6supercharged)
I assume I will have to redo that as well?
Thanks guys!!
Have no phone right now, so would like to get started asap..
Again!! MUCH THANKS!!
Click to expand...
Click to collapse
If you rooted with unrevoked or revolutionary, you will need this file to return to stock, and yes, you will temporarily lose root.
http://dl.dropbox.com/u/38127313/Un....15.00.0808_NV_2.15_release_220182_signed.zip
Change the name to PC36IMG and run it from the root of your SD card through the bootloader. You will lose your root, but your security flag should still be off (S-OFF) so that you can quickly regain root after running this file, after changing it to PC36IMG in place of the first one. (It is Amon-RA and not clockwork. You can reflash clockwork later if you want, which I don't recommend.
http://dl.dropbox.com/u/38127313/Root 2.3.3/PC36IMG3.08.zip
Also, you might need to flash a superuser app, in case you need root inside the stock ROM. Here is an old one, but it should still work for you.
http://dl.dropbox.com/u/38127313/Root 2.3.3/su-2.3.6.2-efgh-signed.zip
Like the previous users said, it's probably not necessary, but I'm just giving you what you asked for.
hmmm.. so now its not necessary ? I was always under that impression..
Ok..
Anyone know what the new HOT rom is ??
Gigerbread please ?
Like I said I was using Synergy..
Used Fresh before and a couple others..
whats the hot rom ??
FYI I also partitioned my SD card, or whatever its called.. For the gigerbread thing..
Put MikG 3.0 on it and call it done. Rock solid ROM, great battery life, and awesome tweaks built in. It will be like an all new phone. Enjoy
Sent from my PC36100 using xda premium
This is why I stress making a nandroid of your stock/rooted immediately after Rooting.
You may want to simply reformat your SD Card. I've been having a few issues and realized it's been months since I cleaned up and reformatted/repartitioned my SD Card, so I plan on doing that tomorrow and flashing a new ROM
Use "Best Method" for Cleanest way (Wiping)
OLDER: Froyo v2.2 (3.70.651.1) http://keetsa.com/files/RUU_SuperSo...15.00.11.19_NV_1.90_release_161482_signed.exe
Most Current version is "Gingerbread v2.3.3 (4.54.651.1).EXE" http://www.multiupload.com/LLV12N2WU8
with "xxx.EXE file", You'll need to Run it on Widows and install on Phone thru Micro USB plug.
BEST Method to install Most Current STOCK ROM:
1. Download + Rename to "PC36IMG.zip" on SDCARD + (Boot into Recovery +Install) "AmonRa Recovery v3.11-gnm" http://dl.dropbox.com/u/34586908/PC36IMG-ra-supersonic-3.11-gnm.zip
2. (Boot into Recovery), WIPE these 8 lines (All data/factory Reset, /data, /cache, /sdcard/.android_secure, /system, Dalvik-cache, battery stats, rotate settings)
3. Download + Rename to "PC36IMG.zip" on SDCARD + (Boot into Recovery +Install) "GB v4.54.651.1.ZIP" http://db.tt/Ck6AB18E
If you want non Stock Recovery + Rooted:
1. Rename your "(AmonRa Recovery v3.11-gnm) PC36IMG.zip" to "PC36IMG.zip" again. (Boot into Recovery +Install). (cus Stock Rom changed you to STOCK Recovery)
2. (Boot into Recovery + Install) "Root (Superuser-3.0.7-efghi-signed).zip" www.mediafire.com/?16a07x3800wvak6
No need to revert to stock.
Use vr superwipe
Save the contents of your sd card to a computer, then reformat the sd card
Wipe everything on the wipe menu, then flash a new ROM.
copy the titanium backup directory back to your sd card and restore apps without data first, then restore data of any games or what not.
Problems should be fixed.
Sent from my PC36100 using Tapatalk
You have a lot of options here. As the preceding posts may have eluded to. Depending on how consistent and deep your issues are, there are different steps that need to be taken.
You can always wipe the ROM and reflash. Do a dirty flash, by just wiping cache and dalvik, then reflashing. That tends to be my temp work around sometimes.
Worst case I've seen is reverting to stock. Unrooting. And starting back over.
With any new ROM you'll need to reflash your mods. Becareful tho of what mods you're using. Not all are compatible across the board.
HipKat said:
This is why I stress making a nandroid of your stock/rooted immediately after Rooting.
You may want to simply reformat your SD Card. I've been having a few issues and realized it's been months since I cleaned up and reformatted/repartitioned my SD Card, so I plan on doing that tomorrow and flashing a new ROM
Click to expand...
Click to collapse
Did reformatting the SD card help? I just realized and did the same thing. It had been a good 3-4 from changes and about a year since I formatted my card.
It helps a lot. I reformat mine about every 3-6 months
Swyped From The Hippest MIUI'd phone Using XDA Premium
I'm running an S4 and have this very weird issue where after installing a custom rom, the phone would reboot and load the rom successfully, but if I ever reboot it, it never wants to go past the Samsung logo.
If I try entering TWRP and fixing permissions or factory reset, it just comes up with errors and fails. The only way around it is to format data, then reflash the rom.
But now I have a nandroid backup so everytime I reboot, I basically have to reflash the rom.. It's happened on at least 2 roms!
I've used the search function on the forums and found a thread was inconclusive so I've made this thread.
Thanks in advance
(This is my first Android phone too, so I'm not 100% familiar with all the different software and techniques, but I can definitely learn!)
Try flashing the ROM with the latest stock CWM. TWRP can cause issues.
Kesh09 said:
I'm running an S4 and have this very weird issue where after installing a custom rom, the phone would reboot and load the rom successfully, but if I ever reboot it, it never wants to go past the Samsung logo.
If I try entering TWRP and fixing permissions or factory reset, it just comes up with errors and fails. The only way around it is to format data, then reflash the rom.
But now I have a nandroid backup so everytime I reboot, I basically have to reflash the rom.. It's happened on at least 2 roms!
I've used the search function on the forums and found a thread was inconclusive so I've made this thread.
Thanks in advance
(This is my first Android phone too, so I'm not 100% familiar with all the different software and techniques, but I can definitely learn!)
Click to expand...
Click to collapse
go into the wipe options on twrp - go to advanced and select - cache, dalvik, system, data - swipe
then do a normal full wipe
reflash the chosen rom
power off rather than reboot
then power up
something gets fracked with the wipes somewhere and thats how i fixed it.
either that or flash philz recovery through odin and do a "new rom" wipe
Gotcher said:
Try flashing the ROM with the latest stock CWM. TWRP can cause issues.
Click to expand...
Click to collapse
For some reason, whenever I install CWM, it keeps getting stuck at "recovery booting" and once in maybe 30 times it works, haven't got it to work in a while.. Not sure what's happening, but if I flash TWRP again, it boots up fine. Am I doing anything wrong? Using Philz touch..
scottyf79 said:
go into the wipe options on twrp - go to advanced and select - cache, dalvik, system, data - swipe
then do a normal full wipe
reflash the chosen rom
power off rather than reboot
then power up
something gets fracked with the wipes somewhere and thats how i fixed it.
either that or flash philz recovery through odin and do a "new rom" wipe
Click to expand...
Click to collapse
This hasn't worked for me, and yeah, I can't seem to get CWM to like my phone..
Kesh09 said:
For some reason, whenever I install CWM, it keeps getting stuck at "recovery booting" and once in maybe 30 times it works, haven't got it to work in a while.. Not sure what's happening, but if I flash TWRP again, it boots up fine. Am I doing anything wrong? Using Philz touch..
This hasn't worked for me, and yeah, I can't seem to get CWM to like my phone..
Click to expand...
Click to collapse
try flashing the rom twice in succession. it will stick eventually but its just getting the right combo. these S4's are a right pain in the ass just now.
also another option would be downloading a rom with Aroma installer onto a micro sd and see if that gets you out of the problem. ive found on other devices ive had that a rom with Aroma can sometimes get you moving (id suggest Omega rom as a good solid base)
scottyf79 said:
try flashing the rom twice in succession. it will stick eventually but its just getting the right combo. these S4's are a right pain in the ass just now.
also another option would be downloading a rom with Aroma installer onto a micro sd and see if that gets you out of the problem. ive found on other devices ive had that a rom with Aroma can sometimes get you moving (id suggest Omega rom as a good solid base)
Click to expand...
Click to collapse
The rom I'm flashing (twice) now is Omega actually!
I'll see how this goes! Hoping it's okay!
..
try to install another rom clean & stable and do full wipe or trust me the best to turn the phone to default firmware.
Kesh09 said:
The rom I'm flashing (twice) now is Omega actually!
So are you suggesting I install Omega, get it run, then install Aroma installer and reinstall it?
Click to expand...
Click to collapse
no i just meant flash the rom twice IF it didnt have Aroma.
try GoldenEye rom from micro sd (obviously downloaded and placed on the card through a pc and put back in the phone).
Or as above - you might have to start from scratch and use Odin to revert back to stock and re-root etc again.
Although i said Aroma sometimes helps, being honest it was a rom with Aroma that started causing me a similar issue in the first place (Not Omega or Foxhound though)
No luck guys... I think I'd rather start from a stock rom too. When I created my stock rom backup, it was through nandroid and an CWM format, but CWM did work, it froze when it was checking for MD5 or something...
But now I'm trying to find the right firmware for my phone, is there any thing I need to look out for? Gt-i9505 from Australia?
http://forum.xda-developers.com/showthread.php?t=2265477
In that thread, there's two of them, I'm downloading the one closest to when I bought it which was June
Hello, I just recently rooted my note 3 and used safestrap to install roms. So far I have tried to install Hyperdrive and Jelly beans. neither will flash correctly. They go through the entire process and say sucessful. But then they say "unable to mount '/system," and "unable to mount '/systemorig."
Any help would be greatly appreciated.
Oh hell, now it wont even let me restore my backup. It was before. When i try now it says E: Unable to mount '/system. 5 times. Ugh. This blows. Cant reboot either. tells me no os installed.
Are you trying to install on the stock slot?
Sent from my SM-N900V using Tapatalk
DJ0224 said:
Oh hell, now it wont even let me restore my backup. It was before. When i try now it says E: Unable to mount '/system. 5 times. Ugh. This blows. Cant reboot either. tells me no os installed.
Click to expand...
Click to collapse
Did this on my tablet formatted the system and my internal memory on accident. Try downloading via a computer or tablet or other phone a ROM onto a Micro SD card then flash your ROM that way, that's what I had to do hopefully that will work for you. Sounds like your running with no ROM installed at all and you might of erased or corrupted your back up. Good luck!
ODIN... its not the end of the world.... at least not that i think so.
z06mike said:
Are you trying to install on the stock slot?
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
Yes, I am installing on the stock slot. I fixed everything with odin and re rooted and everything. Roms will install successfully now but will not boot When I start the phone i get a black screen. That's it.
What version of SS do you have installed?
Sent from my SM-N900V using Tapatalk
z06mike said:
What version of SS do you have installed?
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
SS 3.72. I took the nc4 OTA. I used towel root, the newest version of chainfire supersu, installed busy box, then I installed SS 3.72. Everything worked great. I read that romslots will not work in 3.72 so I did a backup and i've tried to install Hyperdrive, Jelly beans (which i learned will not work since its 4.3 based BUT it still installs), and Eclipse. They all install but do not boot at all. Restoring my backup works fine though,
DJ0224 said:
Yes, I am installing on the stock slot. I fixed everything with odin and re rooted and everything. Roms will install successfully now but will not boot When I start the phone i get a black screen. That's it.
Click to expand...
Click to collapse
That is pretty much what i am encountering as well. I have stock backed up and i can boot into that if i need to but installing another rom on the stock slot or slot 1 is fine but the problem is booting. It will go up to the screen where it shows safestrap screen and then i just get a blank black screen. I left on for over 10min and nothing.
I got slot 1 to work by toggling the memory allocation to maximum. I believe it is unsupported at this point 3.72? somewhere I read that. You can only install rom on stock slot at this time. I tried installing on both but nada.
The system not mounting I get as well but sometimes it lets me check it and sometimes it does not let me check it. Dunno why.
I had the system not mounting problem, I returned to stock with odin and I dont have that issue anymore. The only problem I have now is the roms not booting.
Bump.
Anybody find anything useful? Im still having the same issue.
running stock rom on stock rom slot everything works fine, when i install a custom rom to rom slot 1 and boot to custom rom the rom works and does everything it should but i am not able to reboot or power off my phone. it does this if i am on custom rom or stock rom. when rebooting or powering off it gets stuck right after logo of rom goes away and stays there with led light, back arrow and open apps keys lit up. i have to remove battery and boot that way. after i wipe/ delete custom rom from rom slot 1 and everything works fine ??????
Dpike698 said:
running stock rom on stock rom slot everything works fine, when i install a custom rom to rom slot 1 and boot to custom rom the rom works and does everything it should but i am not able to reboot or power off my phone. it does this if i am on custom rom or stock rom. when rebooting or powering off it gets stuck right after logo of rom goes away and stays there with led light, back arrow and open apps keys lit up. i have to remove battery and boot that way. after i wipe/ delete custom rom from rom slot 1 and everything works fine ??????
Click to expand...
Click to collapse
If you would have read numerous threads on the issue you would have known. Instead you found out the same way I did some weeks ago!! There are known bug issues with Safestrap that cause the problems you are experiencing when using a rom slot. Use the stock slot only and all will work well. Yes, this means you have to wipe out your stock S5 system, but you can always odin back to stock.
Chopstix9 said:
If you would have read numerous threads on the issue you would have known. Instead you found out the same way I did some weeks ago!! There are known bug issues with Safestrap that cause the problems you are experiencing when using a rom slot. Use the stock slot only and all will work well. Yes, this means you have to wipe out your stock S5 system, but you can always odin back to stock.
Click to expand...
Click to collapse
With our build you pretty much have to treat safestrap like any other custom recovery. Most other recoveries that I'm aware of don't have various slots for you to dual boot stock and custom roms. Making a backup within safestrap is definitely recommended before you wipe the stock rom slot that way if you want to go back, you won't need to recover with odin. Not saying that's a bad way to go, just a little inconvenient.
Sad to say the developer of our recovery if off doing other things. I don't know if this rom slot one issue is something that can be patched within the recovery, or it's it's more of a ROM developer kind of thing, but I don't see that getting fixed any time soon.
DJNads said:
With our build you pretty much have to treat safestrap like any other custom recovery. Most other recoveries that I'm aware of don't have various slots for you to dual boot stock and custom roms. Making a backup within safestrap is definitely recommended before you wipe the stock rom slot that way if you want to go back, you won't need to recover with odin. Not saying that's a bad way to go, just a little inconvenient.
Sad to say the developer of our recovery if off doing other things. I don't know if this rom slot one issue is something that can be patched within the recovery, or it's it's more of a ROM developer kind of thing, but I don't see that getting fixed any time soon.
Click to expand...
Click to collapse
No it won't... Hash said in the safestrap thread that he was shutting down deveopment work on it... the only hope would be that another dev dives in to it.
Chopstix9 said:
No it won't... Hash said in the safestrap thread that he was shutting down deveopment work on it... the only hope would be that another dev dives in to it.
Click to expand...
Click to collapse
Considering it's open source, I'm hoping it won't be too long before another developer picks it up. (PlayfulGod maybe? )
Hi,
I have now rooted my phone and seemed to have removed the issue I was encountering. (IMS Framework)
However I have a few issues since rooting and am a bit unsure if what to do next
Any help to the following points is greatly appreciated. I am complete noob so only plain English and links to idiots guides please!
1) as a recent post states, I am also suffering from frequent restarts. They are quick restarts, only a few seconds (not like a hard reset etc) however there seems to be no specific reason or app causing it.
Posts suggest removing Knox might help?
I have a few root removal apps installed now so can someone tell me which Knox apps/programs can be safely removed???
2) when I press side button to unlock the phone, the screen sometimes freezes and doesn't respond. I have to press lock button again to lock, again to unlock then it works again
Not a major problem but annoying none the less
Any ideas??
3) I rooted to save battery by deleting the vodafone virus IMS framework however battery is still not as it good as it was before IMS framework. It doesn't drain within a few hours but again it's annoying.
Android system and OS are currently using more battery than the screen
So being a noob I'm. It sure where to go from here....
I've done a backup from nandroid manager app (in a cwm format it seems) and downloaded rom manager however CWM installer hasn't worked (something on the install guide says something about Samsung devices needing to install something but I can't find a guide on it)
(Please also confirm, the back up I did to external sd card has a few files including an md5 file, a few tar files and recovery img file. Is this correct? Is this the folder I would use to restore if I encounter issues later on??)
So I'm thinking I unroot and reinstall factory settings through kies etc (guide how to do this would be useful??!!)
Then root again and install a new rom (a nice clean one without the bloatware etc)
EDIT. IVE READ HOW TO INSTALL CWM FROM ODIN SO WILL TRY THAT.
QUESTION THEN BECOMES : WILL INSTALLING A CUSTOM ROM FIX POINTS 1,2 and 3????
Am I overthinking this or is there a quicker fix to my issues above?
Any help appreciated!!
1. If you have a custom recovery then flash knox removal script. Then you don't have to delete it manually. For example > http://forum.xda-developers.com/galaxy-s4/general/scriptknoxout-complete-brutal-knox-t2807172
2. Could be related to point 1.
Flash the script and it should solve most of your problems.
For your last question. There is no point in unrooting and using Kies if you want a custom rom. A custom rom will fix point 1, 2 and 3.
HELP!
so i install the Knox Zip (through teamwin)
Phone said "updating apps" then stuck on samsung screen.
Rebooted again.
Done multiple reboots through TWRP. Still same - stuck on samsung screen
I wiped data/factory reset but issue is still same.
I can get to the screen by holding down power volume up and home button but reboot not working.
I looked for restore but it is blank (i did a restore on SD but its not showing!!!)
I need help!
rootromnoob said:
so i install the Knox Zip (through teamwin)
Phone said "updating apps" then stuck on samsung screen.
Rebooted again.
Done multiple reboots through TWRP. Still same - stuck on samsung screen
I wiped data/factory reset but issue is still same.
I can get to the screen by holding down power volume up and home button but reboot not working.
I looked for restore but it is blank (i did a restore on SD but its not showing!!!)
I need help!
Click to expand...
Click to collapse
Either reflash the stock rom you are on
or
Flash a custom rom that you want.
Lennyz1988 said:
Either reflash the stock rom you are on
or
Flash a custom rom that you want.
Click to expand...
Click to collapse
Im guessing that has to be via Odin as there is no ROM file on my phone??
(or could i put a ROM on my External SDcard and flash via TWRP?)
rootromnoob said:
Im guessing that has to be via Odin as there is no ROM file on my phone??
(or could i put a ROM on my External SDcard and flash via TWRP?)
Click to expand...
Click to collapse
Stock ROM (download it on your pc) -> Flash it via ODIN
or
Custom ROM having it in your SDCARD -> Install it via TWRP (Custom Recovery)
Took a while messing around with sd card but managed to flash liquid smooth and all working
Annoyingly Odin didn't recognise phone but that's ill sort that out another time
Thanks for help