Related
Since I'm a newbie here I can't post this problem to "[N10] CF-Auto-Root". If some kind person with permissions could alert the people there to this problem I'd really appreciate it.
I installed CF-Auto-Root on my Nexus 10, and after an OTA upgrade to 4.3 the tablet is seriously bricked. The sequence was as follows:
* Started from stock 4.2.2
* Downloaded the latest CF-Root (July 29)
* Manually re-rooted (as instructed on first page)
* Everything is peachy. su in adb shell works, get root prompt, etc. Browsed directories but made no changes.
* Attempted an OTA upgrade to 4.3 (Forgot to re-lock the bootloader). Upgrade failed, giving some generic (as in uninformative) error message. I think it was something about file check failed,
Now the tablet boot-up doesn't get past the colored X. I can get into bootloader/fastboot mode (robot on back with panel open). The device information is as follows:
Product Name: manta
Variant: wifi
H/W Version: 8
Bootloader Version: MANTALJ12
Carrier Info: NONE
Serial Number: <looks okay>
Lock State: UNLOCKED
Reboot Mode Flag: NONE
This is where I was when I first loaded CF-Root. However, now "adb devices" on the PC (Arch Linux) gives a blank list of devices. When I try to load the factory 4.3 image with "fastboot -w flashall" the PC prints the message:
< waiting for device >
and sits there. Not surprising since adb can't see the device.
I can get into recovery mode (robot on back with red triangle), and can access the menu. Performing wipe data / factory reset hasn't helped. From my PC "adb devices" still shows a blank list of devices.
When I start the "Apply update from ADB" utility from recovery mode, "adb devices" on the PC shows:
???????????? no permissions
If I then enter "adb sideload <file>" on the PC as the prompt on the tablet suggests (the file I used was an Android 4.3 upgrade zip file), the PC responds with:
error: insufficient permissions for device
Does anyone have any idea how I can get my tablet out of this mess? Right now all I want is to get my tablet working again. Any ideas are most welcome.
There's no point in running CF-Autoroot -before- updating to 4.3. You lose root after the update.
Also, just because you don't know what the error message means, doesn't mean it's not informative. What exactly was the error? Try fastboot mode and use the Nexus 10 toolkit located here: http://forum.xda-developers.com/showthread.php?t=2001868 to do a full flash. At this point it sounds like you've manually flashed a bunch of stuff so the regular update zip file is probably insufficient and you should be using the full factory image.
Solved
Got it solved (whew!). Had to run fastboot as root on the PC.
plastikowl said:
There's no point in running CF-Autoroot -before- updating to 4.3. You lose root after the update.
Also, just because you don't know what the error message means, doesn't mean it's not informative. What exactly was the error? Try fastboot mode and use the Nexus 10 toolkit located here: http://forum.xda-developers.com/showthread.php?t=2001868 to do a full flash. At this point it sounds like you've manually flashed a bunch of stuff so the regular update zip file is probably insufficient and you should be using the full factory image.
Click to expand...
Click to collapse
Yeah, I knew I'd lose root, but I'd already installed CF-Autoroot. Figured it would be easy to root again after. Foolish me!
Afraid I forgot to write down the error so it's lost. I was trying to do a full flash but failing (see my "solved post"). The update attempt was desperation, trying to get to the tablet somehow.
Anyway, I managed to do a full flash to the 4.3 factory image, so my tablet is no longer an expensive paperweight.
Thanks very much for yout input.
I tried the Wintool program and ended up getting bootloop forcing me to restore to stock 5.1.1. Problem is now I can take the OTA to 6.0 because the bootlock. I've done some searching and saw the fastboot commands used after I download the clark 5.1.1 file but I don't see those commands listed in the data folder. Secondly I'm not 100% sure how exactly to use fastboot commands with win10. I have asked Motorola to allow me to relock it but no word back from them. Any ideas? I really don't want to be stuck on 5.1.1
If you're wanting to stay stock, you need to:
1. have fastboot downloaded from the Android SDK
2. open administrator command window (start -> enter 'cmd' in search window -> right click on cmd -> select 'Run as administrator'
3. navigate to fastboot.exe location
4. reboot phone to bootloader (power down, then power up holding the volume down button)
5. enter 'fastboot oem lock'
This assumes you have the drivers installed properly, which you should have if you were able to use Wintool.
That will re-lock the bootloader. Depending on what else you may have done (custom recovery, etc.) this may or may not allow you to install the OTA update.
I'll try that again but wintool didn't work very well the first time, it hard crashed at the M. It totally locked up the phone. I found a thread that does the fastboot files, did all that phone boots up fine then locks up and reboots. Get the set up and locks up again. Lesson learned to leave motorola garbage alone and stick with Nexus line next time.
It booted up, but the relock command will not work says the build isn't officially signed
Locking has nothing to do with getting mm.
lafester said:
Locking has nothing to do with getting mm.
Click to expand...
Click to collapse
Maybe you're right, but everytime I took the OTA it failed to install. I finally found and got MM installed and working, but it's now wanting to update the security patch. The LAST time I tried it bootlooped at the warning screen. I would try the root/custom rom again but that I got all kinds of issues when it tried to install the SuperSU, I guess its not right file IDK. So, right now I'm sitting on 6.0 and a message to update but I wont take it. Not sure what to do next.
On my ZF3, I'm on Nougat with the bootloader unlocked and I've confirmed that.
Followed instructions on the XDA ZF3 ROOTING GUIDE thread & ZF3 Toolkit, I can't seem to flash TWRP due to an error.
"
sending 'recovery' (26636 KB)...
OKAY [ 0.912s]
writing 'recovery'...
FAILED (status read failed (Too many links))
finished. total time: 1.075s
"
I've enabled USB debugging and even restarted, redownloaded drivers, changed USB ports and re did again but still the same error.
Any tips and solution?
Try booting TWRP first, then flashing from within TWRP.
The command is "fastboot boot <path to TWRP image>".
sensi277 said:
Try booting TWRP first, then flashing from within TWRP.
The command is "fastboot boot <path to TWRP image>".
Click to expand...
Click to collapse
Just tried right now, did the command but its stuck at booting. My zf3 didn't boot the .img
Prev was too blurry
Have you been able to flash anything via fastboot from that computer?
Which OS are you using, windows? Firewall disabled? Do you have another computer you can try it on? From what I've read, it's a driver issue causing this and since you've tried reinstalling them, I'd try downloading the USB bootable version of Linux and try again. The commands are the same.
You may be able to flash it through an adb shell too, but I'd try the Linux USB first. On the ze552kl, the recovery partition is #59, so the command would be "dd if=/sdcard/TWRP.bin of=/dev/block/mmcblk0p59".
Edit: I see you posted in the other section you tried other computers so i guess try the DD command. Only thing is, you should back up your original partition first just in case because something is definitely bizarre. Run "dd if=/dev/block/mmcblk0p59 of=/sdcard/recoverybak.bin" first so you can revert if it goes awry.
wang1chung said:
Have you been able to flash anything via fastboot from that computer?
Which OS are you using, windows? Firewall disabled? Do you have another computer you can try it on? From what I've read, it's a driver issue causing this and since you've tried reinstalling them, I'd try downloading the USB bootable version of Linux and try again. The commands are the same.
You may be able to flash it through an adb shell too, but I'd try the Linux USB first. On the ze552kl, the recovery partition is #59, so the command would be "dd if=/sdcard/TWRP.bin of=/dev/block/mmcblk0p59".
Edit: I see you posted in the other section you tried other computers so i guess try the DD command. Only thing is, you should back up your original partition first just in case because something is definitely bizarre. Run "dd if=/dev/block/mmcblk0p59 of=/sdcard/recoverybak.bin" first so you can revert if it goes awry.
Click to expand...
Click to collapse
How do you restore that ".bin" if anything fails? And if it does fail, what's the "problem" that I'll be having to fix?
TiTAN-O-One said:
How do you restore that ".bin" if anything fails? And if it does fail, what's the "problem" that I'll be having to fix?
Click to expand...
Click to collapse
You restore it with the same DD command you used to flash the TWRP recovery bin (dd if=/sdcard/recovery.bin of=/dev/block/mmcblk0p59)
No access to recovery is the problem you'll have.
edit: wait, do you get the warning screen on bootup now since unlocking? The one where you hit the volume keys to get to recovery/bootloader mode?
wang1chung said:
You restore it with the same DD command you used to flash the TWRP recovery bin (dd if=/sdcard/recovery.bin of=/dev/block/mmcblk0p59)
No access to recovery is the problem you'll have.
edit: wait, do you get the warning screen on bootup now since unlocking? The one where you hit the volume keys to get to recovery/bootloader mode?
Click to expand...
Click to collapse
I unlocked my ZF3 via the "0.unlock_ze522kl.bat" way. Some people complained that the official way of unlocking frm the Asus website broke their devices or smth.
Got me a "No such file or directory" when I dd. "Failed to open /sdcard/TWRP.bin"
No warning screen as far as ik. I unlock unofficially. Am I right to say that under the Asus bootloader, a barcode will be seen when it is unlocked?
Im on Nougat officially.
TiTAN-O-One said:
Got me a "No such file or directory" when I dd. "Failed to open /sdcard/TWRP.bin"
No warning screen as far as ik. I unlock unofficially. Am I right to say that under the Asus bootloader, a barcode will be seen when it is unlocked?
Im on Nougat officially.
Click to expand...
Click to collapse
Not sure about the unofficial way but with the official way you get that bootup menu I mentioned along with a warning screen that your phone isn't secure or something. I believe the unofficial way only works on marshmallow, did you use it on nougat?
You have to take the TWRP bin and place it in the root of your sdcard and then try the command.
wang1chung said:
Not sure about the unofficial way but with the official way you get that bootup menu I mentioned along with a warning screen that your phone isn't secure or something. I believe the unofficial way only works on marshmallow, did you use it on nougat?
You have to take the TWRP bin and place it in the root of your sdcard and then try the command.
Click to expand...
Click to collapse
Okay i can confirm the "Bootup and device is insecure" screen is the official way to Unlock your bootloader. I didn't do via that way cos I'm on Nougat. I did the unofficial way cos that's meant for nougat.
As for the TWRP flash, i did everything and still the same. TWRP.bin is at the chosen directory. Just to confirm, its all done under ADB right? And then simply use the dd command right?
TiTAN-O-One said:
Okay i can confirm the "Bootup and device is insecure" screen is the official way to Unlock your bootloader. I didn't do via that way cos I'm on Nougat. I did the unofficial way cos that's meant for nougat.
As for the TWRP flash, i did everything and still the same. TWRP.bin is at the chosen directory. Just to confirm, its all done under ADB right? And then simply use the dd command right?
Click to expand...
Click to collapse
We're talking internal sdcard, right? While in the adb shell, cd to /sdcard and do an ls and verify you can see your TWRP.bin there.....I think it's case sensitive too.
Also, remember I said to back your original one up just in case, so try to do that and verify everything is working.
I was under the impression the unofficial unlock didn't work on nougat and the official did? I thought it was some people doing the unofficial unlock that bricked their phones, which is why I chose the official, lol.
wang1chung said:
We're talking internal sdcard, right? While in the adb shell, cd to /sdcard and do an ls and verify you can see your TWRP.bin there.....I think it's case sensitive too.
Also, remember I said to back your original one up just in case, so try to do that and verify everything is working.
I was under the impression the unofficial unlock didn't work on nougat and the official did? I thought it was some people doing the unofficial unlock that bricked their phones, which is why I chose the official, lol.
Click to expand...
Click to collapse
Right guess what m8. I realised that I didnt and now couldn't unlock my bootloader. Here's what I did for the Unofficial Nougat way of unlocking ZF3 bootloader
Download this Zip file containing a folder called RootZenfone3-master.
Inside this folder contains 4 .bat files that is automated and named orderly so users can easily unlock and root their ZF3.
1st bat file being UnlockzeXXX.bat
2nd bat FlashRecovery.bat
3rd bat GetRoot.bat
Now 1st bat is obvly the bat file to unlock bootloader, ran it, followed the instructions to boot to bootloader etc and waited, only to know that unlocking the bootloader was unsuccessful.
Neermind that, if the bat file wasnt working, you can manually "Fastboot flash all" a file called unlock_ze552kl.raw that i believe contains a partition to unlock the bootloader.
So yes I ran the command but now i have an error that says
"FAILED (remote: Partition flashing is not allowed)"
Same error for both my Linux and Windows machine.
Found a thread here and a user says
"The ASUS Zenfone 3 comes shipped encrypted by default. This is required by Google's Play Services agreement for phone OEMs. You cannot remove decryption on the Zenfone 3 without using a custom ROM"
I had this annoying "reboot and type my pin password" whenever I restart my phone.
Any idea how to remove or decrypt this? I believe this is the issue to all the failed and permission denied errors i guess.
TiTAN-O-One said:
Right guess what m8. I realised that I didnt and now couldn't unlock my bootloader. Here's what I did for the Unofficial Nougat way of unlocking ZF3 bootloader
Download this Zip file containing a folder called RootZenfone3-master.
Inside this folder contains 4 .bat files that is automated and named orderly so users can easily unlock and root their ZF3.
1st bat file being UnlockzeXXX.bat
2nd bat FlashRecovery.bat
3rd bat GetRoot.bat
Now 1st bat is obvly the bat file to unlock bootloader, ran it, followed the instructions to boot to bootloader etc and waited, only to know that unlocking the bootloader was unsuccessful.
Neermind that, if the bat file wasnt working, you can manually "Fastboot flash all" a file called unlock_ze552kl.raw that i believe contains a partition to unlock the bootloader.
So yes I ran the command but now i have an error that says
"FAILED (remote: Partition flashing is not allowed)"
Same error for both my Linux and Windows machine.
Click to expand...
Click to collapse
That "FAILED (remote: Partition flashing is not allowed)" error means you're bootloader isn't unlocked. I believe that is the root cause of your issue.
Use the official unlock, works every time.
The pin at the beginning bootup is a security setting. I believe there was a thread where someone said to disable security lock and then reenable it but chose "no" when it asks to use pin to start device. Give that a shot first and see.
For the official bootloader unlock, is it compatible with Nougat?
Good news, it IS compatible with Nougat. Now my bootloader is unlocked and TWRP is installed successfully. However, i don't seem to get any root access despite flashing the latest supersu.zip nunerous of times. Any ideas why?
TiTAN-O-One said:
Good news, it IS compatible with Nougat. Now my bootloader is unlocked and TWRP is installed successfully. However, i don't seem to get any root access despite flashing the latest supersu.zip nunerous of times. Any ideas why?
Click to expand...
Click to collapse
Do you see the SuperSU icon in your app drawer?
Did you follow this guide and install all four zips?
I had an issue and needed to update busybox, but that was easily done from the playstore.
wang1chung said:
Do you see the SuperSU icon in your app drawer?
Did you follow this guide and install all four zips?
I had an issue and needed to update busybox, but that was easily done from the playstore.
Click to expand...
Click to collapse
Great! Everything is settled and Im unlocked and rooted successfully too. Thanks for the help.
Glad you got it sorted, now make a TWRP backup of all your partitions and go crazy flashing lol
Did not find any post mentioning rooting for 5C on EMUI. If there are any, let me know and I will take down this thread.
Note-
Applicable for Windows 7, Windows 8 and Windows 10
Similar steps are applicable for EMUI 4.X as well but TWRP file will change.
Saw many user on Honor 5C FB page and on XDA struggling to get root working on EMUI 5. most of the cases I saw, were for EMUI 5.X. I followed the steps mentioned or as applicable for any devices and I did not face any issue so though of compiling this guide for new users who may have faced issue or not able to root the phone. (may be mainly because of correct and working TWRP issue) . I will just simplify the steps so that any new users can do this without any problem and without any prior experience to rooting, it may be long but will be the simple enough for all the users.
Prerequisites-
Enable the developer option in settings-
Go to Settings--> About Phone-->Tab build number 7 times to enable this setting.
Go back in setting page, just above system update, you will see a new menu as -Developer Options
Scroll for the debugging section and enable the USB Debugging
You will be prompted for the confirmation with RSA key, just accept it.
Enable OEM Unlock in Developer Options (just above the USB debugging option) – Most probably this option will not be there on EMUI 5.0 (only few have seen on EMUI but it was there on EMUI 4.1 for all but rarely on EMUI 5.0 or may be because I have used dload most of the time which grayed out this)
Installation of required Drivers.
Connect your phone to PC and install Hi Suite on PC and it will additionally install all the necessary drivers to PC and HiSUite on Mobile.
Download and Install ADB from Link
Accept all the prompts and install ADB drive system wise.
Once installation is completed, if default options are chosen, it will be under C:\adb
Downloading the necessary files.
Download TWRP from Link Thanks to @OldDroid for his Original Thread . Rest of the contributor and credit in original thread by OldDroid.
Move the downloaded file under C:\adb or wherever you have installed the ADB.
Download the SuperSU file from this Link and put it in SD card or keep handy on PC so that you can copy to internal memory later.
Get the unlock as mentioned in this thread
Actual Procedure
Unlocking the bootloader-
Backup all your data as unlocking the bootloader will reset the device and all your data will be erased.
On windows machine, go to folder C:\adb or wherever you installed the adb drivers.
Press shift+right click together and select Open command prompt here
Run - adb reboot bootloader (this command may prompt for acceptance of RSA key if not already accepted)
This will boot the phone into bootloader mode.
Run - fastboot oem unlock <16 digit unlock code- Put your actual code you obtained from Huawei site > (This step will unlock the bootloader and will erase all your data)
Phone will restart automatically.
Installing TWRP
Once on the system, open the PowerShell or command prompt again in ADB folder (can use the previous instance as well)
Run - adb reboot bootloader
Once in bootloader, Run - fastboot flash recovery twrp-3.1.1-0-venus.img (This will install the TWRP recovery for EMUI 5.0 on your phone)
Once done with the flashing the TWRP, Run - fastboot reboot
Rooting
Once booted to system, open the PowerShell or command prompt in ADB folder (can use the previous instance as well)
Run - adb reboot recovery
And your phone will boot into the TWRP recovery.
Copy the SuperU file downloaded to SD card or Internal memory.
Install the SuperSU zip.
Reboot and enjoy.
Happy Flashing.
working twrp on NEM-L21 https://github.com/OpenKirin/android...0-2-hi6250.img
working supersu on NEM-L21 https://drive.google.com/file/d/0BxW...9ZRGxBTUE/view
Voutsjude said:
working twrp on NEM-L21 https://github.com/OpenKirin/android...0-2-hi6250.img
working supersu on NEM-L21 https://drive.google.com/file/d/0BxW...9ZRGxBTUE/view
Click to expand...
Click to collapse
Page not found for first and file not found for 2nd.
The links and the files mentioned in this thread will work on any honor 5C and are live files.
Nice and Thankssss
shashank1320 said:
did not find any post mentioning rooting for 5c on emui. If there are any, let me know and i will take down this thread.
note-
applicable for windows 7, windows 8 and windows 10
similar steps are applicable for emui 4.x as well but twrp file will change.
saw many user on honor 5c fb page and on xda struggling to get root working on emui 5. Most of the cases i saw, were for emui 5.x. I followed the steps mentioned or as applicable for any devices and i did not face any issue so though of compiling this guide for new users who may have faced issue or not able to root the phone. (may be mainly because of correct and working twrp issue) . I will just simplify the steps so that any new users can do this without any problem and without any prior experience to rooting, it may be long but will be the simple enough for all the users.
prerequisites-
enable the developer option in settings-
go to settings--> about phone-->tab build number 7 times to enable this setting.
go back in setting page, just above system update, you will see a new menu as -developer options
scroll for the debugging section and enable the usb debugging
you will be prompted for the confirmation with rsa key, just accept it.
enable oem unlock in developer options (just above the usb debugging option) – most probably this option will not be there on emui 5.0 (only few have seen on emui but it was there on emui 4.1 for all but rarely on emui 5.0 or may be because i have used dload most of the time which grayed out this)
installation of required drivers.
connect your phone to pc and install hi suite on pc and it will additionally install all the necessary drivers to pc and hisuite on mobile.
download and install adb from link
accept all the prompts and install adb drive system wise.
once installation is completed, if default options are chosen, it will be under c:\adb
downloading the necessary files.
download twrp from link thanks to @olddroid for his original thread . Rest of the contributor and credit in original thread by olddroid.
move the downloaded file under c:\adb or wherever you have installed the adb.
download the supersu file from this link and put it in sd card or keep handy on pc so that you can copy to internal memory later.
get the unlock as mentioned in this thread
actual procedure
unlocking the bootloader-
backup all your data as unlocking the bootloader will reset the device and all your data will be erased.
on windows machine, go to folder c:\adb or wherever you installed the adb drivers.
press shift+right click together and select open command prompt here
run - adb reboot bootloader (this command may prompt for acceptance of rsa key if not already accepted)
this will boot the phone into bootloader mode.
run - fastboot oem unlock <16 digit unlock code- put your actual code you obtained from huawei site > (this step will unlock the bootloader and will erase all your data)
phone will restart automatically.
installing twrp
once on the system, open the powershell or command prompt again in adb folder (can use the previous instance as well)
run - adb reboot bootloader
once in bootloader, run - fastboot flash recovery twrp-3.1.1-0-venus.img (this will install the twrp recovery for emui 5.0 on your phone)
once done with the flashing the twrp, run - fastboot reboot
rooting
once booted to system, open the powershell or command prompt in adb folder (can use the previous instance as well)
run - adb reboot recovery
and your phone will boot into the twrp recovery.
copy the superu file downloaded to sd card or internal memory.
install the supersu zip.
reboot and enjoy.
Happy flashing.
Click to expand...
Click to collapse
works perfect at me , thank you so much
here is my phone model and android version
Thank you so much... Love ya for this! I wish u all the success for future works..
shashank1320 said:
Did not find any post mentioning rooting for 5C on EMUI. If there are any, let me know and I will take down this thread.
Note-
Applicable for Windows 7, Windows 8 and Windows 10
Similar steps are applicable for EMUI 4.X as well but TWRP file will change.
Saw many user on Honor 5C FB page and on XDA struggling to get root working on EMUI 5. most of the cases I saw, were for EMUI 5.X. I followed the steps mentioned or as applicable for any devices and I did not face any issue so though of compiling this guide for new users who may have faced issue or not able to root the phone. (may be mainly because of correct and working TWRP issue) . I will just simplify the steps so that any new users can do this without any problem and without any prior experience to rooting, it may be long but will be the simple enough for all the users.
Prerequisites-
Enable the developer option in settings-
Go to Settings--> About Phone-->Tab build number 7 times to enable this setting.
Go back in setting page, just above system update, you will see a new menu as -Developer Options
Scroll for the debugging section and enable the USB Debugging
You will be prompted for the confirmation with RSA key, just accept it.
Enable OEM Unlock in Developer Options (just above the USB debugging option) – Most probably this option will not be there on EMUI 5.0 (only few have seen on EMUI but it was there on EMUI 4.1 for all but rarely on EMUI 5.0 or may be because I have used dload most of the time which grayed out this)
Installation of required Drivers.
Connect your phone to PC and install Hi Suite on PC and it will additionally install all the necessary drivers to PC and HiSUite on Mobile.
Download and Install ADB from Link
Accept all the prompts and install ADB drive system wise.
Once installation is completed, if default options are chosen, it will be under C:\adb
Downloading the necessary files.
Download TWRP from Link Thanks to @OldDroid for his Original Thread . Rest of the contributor and credit in original thread by OldDroid.
Move the downloaded file under C:\adb or wherever you have installed the ADB.
Download the SuperSU file from this Link and put it in SD card or keep handy on PC so that you can copy to internal memory later.
Get the unlock as mentioned in this thread
Actual Procedure
Unlocking the bootloader-
Backup all your data as unlocking the bootloader will reset the device and all your data will be erased.
On windows machine, go to folder C:\adb or wherever you installed the adb drivers.
Press shift+right click together and select Open command prompt here
Run - adb reboot bootloader (this command may prompt for acceptance of RSA key if not already accepted)
This will boot the phone into bootloader mode.
Run - fastboot oem unlock <16 digit unlock code- Put your actual code you obtained from Huawei site > (This step will unlock the bootloader and will erase all your data)
Phone will restart automatically.
Installing TWRP
Once on the system, open the PowerShell or command prompt again in ADB folder (can use the previous instance as well)
Run - adb reboot bootloader
Once in bootloader, Run - fastboot flash recovery twrp-3.1.1-0-venus.img (This will install the TWRP recovery for EMUI 5.0 on your phone)
Once done with the flashing the TWRP, Run - fastboot reboot
Rooting
Once booted to system, open the PowerShell or command prompt in ADB folder (can use the previous instance as well)
Run - adb reboot recovery
And your phone will boot into the TWRP recovery.
Copy the SuperU file downloaded to SD card or Internal memory.
Install the SuperSU zip.
Reboot and enjoy.
Happy Flashing.
Click to expand...
Click to collapse
Thank you so much... Love ya for this! I wish u all the success for future works..
tahahaiyat said:
Thank you so much... Love ya for this! I wish u all the success for future works..
Click to expand...
Click to collapse
Thanks for lovely wishes
Hi all.
I need help with installation ADB. Download file, start installation, accept all the prompts but 0 files copied and dont have file under C:\adb.
What is wrong? How install ADB?
Thanks
outcastWBC said:
Hi all.
I need help with installation ADB. Download file, start installation, accept all the prompts but 0 files copied and dont have file under C:\adb.
What is wrong? How install ADB?
Thanks
Click to expand...
Click to collapse
Method is same as given in instructions. It shoukd install without issue buddy
Hello,
I had the NEM-L51 from my mother running EMUI 4.0x, and decided to upgrade it to the latest version.
It was unlocked, with TWRP as recovery, and rooted.
I did flash back the stock recovery (from HuaweiUpdateExtractor/Update.app), rebooted the device, and applied the OTA (B350 first, then latest B357).
Until then everything is fine, but when I try to flash the TWRP recovery, it doesn't work :
D:\Android\platform-tools>fastboot flash recovery D:\Downloads\twrp-3.1.1-0-venus.img
target reported max download size of 471859200 bytes
sending 'recovery' (24464 KB)...
OKAY [ 0.719s]
writing 'recovery'...
FAILED (remote: Command not allowed)
finished. total time: 0.734s
D:\Android\platform-tools>fastboot flash recovery D:\Downloads\twrp-3.2.1-0-nemo.img
target reported max download size of 471859200 bytes
sending 'recovery' (21972 KB)...
OKAY [ 0.672s]
writing 'recovery'...
FAILED (remote: Command not allowed)
finished. total time: 0.672s
D:\Android\platform-tools>fastboot flash recovery D:\Downloads\twrp-3.1.1-0-nemo.img
target reported max download size of 471859200 bytes
sending 'recovery' (21918 KB)...
OKAY [ 0.641s]
writing 'recovery'...
FAILED (remote: Command not allowed)
finished. total time: 0.656s
Click to expand...
Click to collapse
Neither the recommended Venus one, or the current / previous nemo one can be flashed.
Phone and FRP status in fastboot mode both shows Unlocked / Unlock, and the OEM Unlock option in EMUI Developper Settings is also enabled (I toggled it just to be sure).
I'm not sure what's wrong.
Would the update mess with the OEM unlock (by relocking and showing a wrong status) ?
I'd rather not try fastboot OEM unlock with the code (still have it somewhere) and lose data.
Thanks for any advice
Fr33L4nc3r said:
Hello,
I had the NEM-L51 from my mother running EMUI 4.0x, and decided to upgrade it to the latest version.
It was unlocked, with TWRP as recovery, and rooted.
I did flash back the stock recovery (from HuaweiUpdateExtractor/Update.app), rebooted the device, and applied the OTA (B350 first, then latest B357).
Until then everything is fine, but when I try to flash the TWRP recovery, it doesn't work :
Neither the recommended Venus one, or the current / previous nemo one can be flashed.
Phone and FRP status in fastboot mode both shows Unlocked / Unlock, and the OEM Unlock option in EMUI Developper Settings is also enabled (I toggled it just to be sure).
I'm not sure what's wrong.
Would the update mess with the OEM unlock (by relocking and showing a wrong status) ?
I'd rather not try fastboot OEM unlock with the code (still have it somewhere) and lose data.
Thanks for any advice
Click to expand...
Click to collapse
This should work fine but if not, can try Hassan's recovery
shashank1320 said:
This should work fine but if not, can try Hassan's recovery
Click to expand...
Click to collapse
Before trying that recovery, I just tried to flash the stock one from NEM-L51C432B357 full OTA package, and it doesn't work either
D:\Android\platform-tools>fastboot flash recovery D:\Android\HuaweiUpdateExtractor_0.9.9.5\RECOVERY.img
target reported max download size of 471859200 bytes
sending 'recovery' (35570 KB)...
OKAY [ 0.932s]
writing 'recovery'...
FAILED (remote: Command not allowed)
finished. total time: 0.954s
Click to expand...
Click to collapse
So it's not a recovery issue.
How useful is the HiSuite backup ?
If I make a backup with it, will it be able to restore most user app's and system's data ?
I'd rather not re set everything up, and I'm afraid I'll have to retry to OEM unlock the device (so force wipe), even if it says it's unlocked (which it should have remained in the first place)
Fr33L4nc3r said:
Before trying that recovery, I just tried to flash the stock one from NEM-L51C432B357 full OTA package, and it doesn't work either
So it's not a recovery issue.
How useful is the HiSuite backup ?
If I make a backup with it, will it be able to restore most user app's and system's data ?
I'd rather not re set everything up, and I'm afraid I'll have to retry to OEM unlock the device (so force wipe), even if it says it's unlocked (which it should have remained in the first place)
Click to expand...
Click to collapse
Hisuite can be used for back.. reliable one but not same as titanium backup. Backup WhatsApp on local and g drive. Zip the WhatsApp folder in internal memory and then copy to pc.
Rest other apps, via hisuite (can backup WhatsApp as well here).
Fr33L4nc3r said:
Before trying that recovery, I just tried to flash the stock one from NEM-L51C432B357 full OTA package, and it doesn't work either
So it's not a recovery issue.
How useful is the HiSuite backup ?
If I make a backup with it, will it be able to restore most user app's and system's data ?
I'd rather not re set everything up, and I'm afraid I'll have to retry to OEM unlock the device (so force wipe), even if it says it's unlocked (which it should have remained in the first place)
Click to expand...
Click to collapse
You file should be in path D:\Android\platform-tools\ and not D:\Android\HuaweiUpdateExtractor_0.9.9.5\
I hope adb is installed under D:\Android\platform-tools\, if not, it will be udner C drive as C:\adb\
copy the recovery file whereever the adb is installed and then run the command
fastboot flash recovery twrp-3.1.1-0-venus.img (replace name with your actual file name)
Ok, so in fact fastboot OEM unlock status was not accurate, and something I didn't notice was the absence of dm-verity warning when booting (showing when it's actually unlocked)
Fr33L4nc3r said:
Ok, so in fact fastboot OEM unlock status was not accurate, and something I didn't notice was the absence of dm-verity warning when booting (showing when it's actually unlocked)
Click to expand...
Click to collapse
May be. try moving the files and then flashing from that folder and see if it works.
stopin phone
hello.please help me.last night i unlocked my gt3 and reseted factory data.but after these my phone stopped in page that typed "your device is booting now..." . but nothing going change.
when i hold power key or power key with volume up down , my phone get restart and show huawei mark and after that show the pervious page that i stoped in it and nothing change again.what can i do? :crying::crying::crying::crying:
please help me, my device is Huawei GT3 (honor 5c) (NMO L31) it was unlock bootloader before i bought it and now i want to install twrp, so i have to learn a lot of website and Follow me, I downloaded and installed Adb, installed the driver, then downloaded the twrp version with nemo honor for honor 5c, then open CMD or powershell to write commands like adb reboot bootloader then adb fastboot flash recovery twrp.img is under the writing that says Failed (remote: image verification error), I previously copied the twrp 3.0 file ... into the adb folder and renamed to twrp. Now I have to do to install twrp on my device. Please help me.
Hello, I have an NMO_L31 (honor 5c - huawei gr5 mini) device and I have experienced a Failed (remote: image verification error) error when installing TWRP while my phone was unlocked before. have searched from a lot of technology pages to find remedies but all failed. But my God, Jehovah listened to my plea and brought me to @shashank123, I contacted him through XDA and I got him a phone number to make friends on the telegram, he helped me out I and I have overcome the above error. I would like to explain how to overcome the error that I tried. First, I went back to emui 4.1.2 (you can see the instructions then allow OEM unlock, then I update the OTA to emui 5, allow usb debugging when the update is complete. Shift + Right click on CMD (or powershell) and enter "adb devices" to see the connected device, then enter "adb reboot bootloader" then enter "fastboot oem get-bootinfo" To check if the bootloader has been unlocked, then enter the command "fastboot oem unlock (code)" to unlock if the relock bootloader, then if the bootloader has been unlocked then the purpose of the command to factory reset. If that is the case, then go to the phone and see if factory reset is complete. Then develop and reconnect to adb, check the device connected to the "adb devices" command then go to the "adb reboot bootloader" command to get to the fastboot and then use the command "fastboot flash recovery recovery_name.img" (for example : Twrp) "Finally, if the word OKEY appears, you are successful. If you can not solve this problem, please send a message to @shashank123 in XDA and ask for his phone number to make friend through telegram and regular help message because he does not often use XDA. Thank you very much Shashank for helping me. Thanks be to my god JESU CHRIST and JEHOVAH.
tanhoang1702 said:
Hello, I have an NMO_L31 (honor 5c - huawei gr5 mini) device and I have experienced a Failed (remote: image verification error) error when installing TWRP while my phone was unlocked before. have searched from a lot of technology pages to find remedies but all failed. But my God, Jehovah listened to my plea and brought me to Shashank123, I contacted him through XDA and I got him a phone number to make friends on the telegram, he helped me out I and I have overcome the above error. I would like to explain how to overcome the error that I tried. First, I went back to emui 4.1.2 (you can see the instructions then allow OEM unlock, then I update the OTA to emui 5, allow usb debugging when the update is complete. Shift + Right click on CMD (or powershell) and enter "adb devices" to see the connected device, then enter "adb reboot bootloader" then enter "fastboot oem get-bootinfo" To check if the bootloader has been unlocked, then enter the command "fastboot oem unlock (code)" to unlock if the relock bootloader, then if the bootloader has been unlocked then the purpose of the command to factory reset. If that is the case, then go to the phone and see if factory reset is complete. Then develop and reconnect to adb, check the device connected to the "adb devices" command then go to the "adb reboot bootloader" command to get to the fastboot and then use the command "fastboot flash recovery recovery_name.img" (for example : Twrp) "Finally, if the word OKEY appears, you are successful. If you can not solve this problem, please send a message to Shashank123 in XDA and ask for his phone number to make friend through telegram and regular help message because he does not often use XDA. Thank you very much Shashank for helping me. Thanks be to my god JESU CHRIST and JEHOVAH.
Click to expand...
Click to collapse
No problem at all mate. Helping through telegram was quick in real time rather multiple post or message and then waiting for response from each other. Due to time crunch, I opted to quick help rather keep you waiting all day long
Good you got your phone as per your requirement and able to do what you wanted. Thanks and Enjoy.
You can edit your comment to say "@shashank1320" (use without double quotes) rather Shashank123 as users may send message or qoute him and get no response as that user may or may not exist :silly:
grand.mohammad said:
hello.please help me.last night i unlocked my gt3 and reseted factory data.but after these my phone stopped in page that typed "your device is booting now..." . but nothing going change.
when i hold power key or power key with volume up down , my phone get restart and show huawei mark and after that show the pervious page that i stoped in it and nothing change again.what can i do? :crying::crying::crying::crying:
Click to expand...
Click to collapse
Boot to bootloader again and see the bootloader state if locked or unlocked. Try unlocking it again.
Red Magic 5G Bootloader Unlock Guide: OR get ROOT & TWRP without unlocking the BL!!!
***Bootloader Unlock Instructions for the Nubia Redmagic 5G + installing TWRP:***
WARNING: ANY BOOTLOADER UNLOCK METHOD INVOLVES THE RISK OF BRICKING YOUR DEVICE PERMANENTLY. WHILE THERE IS USUALLY A WAY TO RECOVER, DO NOT ATTEMPT THIS PROCEDURE IF YOU DO NOT KNOW WHAT YOU ARE DOING. BAD THINGS CAN HAPPEN. YOU HAVE BEEN WARNED!!! YOU MAY BE LEFT WITH A USELESS BRICK!!! READ ALL FURTHER WARNINGS EXPERIMENTAL METHOD IN ORIGINAL DOWNLOAD FILE WORKS, I'M USING IT
If you want a NOOB guide look at this post: https://forum.xda-developers.com/nu...beginner-tutorial-unlock-bootloader-t4131585/
Also note a user has managed to fix the FP sensor post BL unlock, see this post here: https://forum.xda-developers.com/nu.../guide-calibration-finger-print-loss-t4132961
Still, I suggest root bypass it's better.
MegaNZ Link for Root without unlocking the Bootloader, and without breaking the FP, also includes instructions for installing BlackMagic5G (explanation below), adding HD VOLTE, how to restore from a brick, and some other cool tricks: https://mega.nz/file/igphSCTD#OybJo9t1zwvJ0bdbAcN2BCqxWXAfHdhk3JFB4_5xkVc
I suggest you flash my BlackMagic5G and don't unlock your bootloader at all - just root. It's CN 2.52 ROM based. You'll get VOLTE, , GApps installed, Rooted with Magisk, TWRP, debloated, YouTube Vanced, AdAway, SmartPack Kernel Manager, etc. - looks like the Global / NA variant of the ROM. Almost perfect except still uses Messages and Phone from Nubia. Plus you will enable Face Unlock not available in the Global or NA versions of the ROM, and FP will still work! Click on the Google Search bar widget and the mic icon takes you to the Google Assistant, the left icon is Google Feed, type in the middle bar for a Google Search. Has 1Weather Free weather widget that looks great, and Google Calendar widget for your whole month of activities. Translate, Lens, Chrome, all the Google Apps are there. And the Chinese Nubia apps are nearly all GONE!
MegaNZ Link for BlackMagic5G Beta - IT'S ONLY THE DATA PARTITION + ROOTED KERNEL + NA SPLASH SCREEN, you NEED to 1) install the Red Magic 2.52 ROM below FIRST 2) Root using the first link posted above 3) Flash restore this from TWRP: https://mega.nz/file/r9hF2BwS#RrAXiFWSBNX8dLqfrH8nNHo_uigPC8uYXonwhALhGbo
MegaNZ Link for the Red Magic 5G CN 2.52 ROM: https://mega.nz/file/aoxBFAqY#EDt2OZBGTME4ZGKnERKpK_t-aJT_rWgD0aqBFkilRcY
*** NOW THE BOOTLOADER UNLOCK INSTRUCTIONS ***
Go to Settings / About phone / Build Number (NX659_J_ENCommon_V3.08 on North American Variant), click 7 times, Now you are a developer message appears, go back a menu to Settings / Other system settings / Developer options.
Enable:
OEM unlocking "Allow the bootloader to be unlocked"
USB debugging "Debug mode when USB is connected"
Install Minimal ADB and Fastboot (Windows 10 in this example): https://www.androidfilehost.com/?fid=746010030569952951
Default install path is:
C:\Program Files (x86)\Minimal ADB and Fastboot\
Go to the Search button on the bottom on Windows 10, type cmd, Command Prompt will appear in the menu. Right click it and Run as Administrator. All commands to be typed will be run in this Command Prompt window (referred to as terminal) unless otherwise stated to run on the phone.
Now Terminal window appears (it says Administrator: Command Prompt in the heading):
Text displayed is:
Microsoft Windows
(c) 2020 Microsoft Corporation. All rights reserved.
C:\WINDOWS\system32>
Typed in terminal:
cd "c:\Program Files (x86)\Minimal ADB and Fastboot"
I now connected the phone to a USB port on the PC.
On the phone, a Window appeared:
"Allow USB debugging?"
The computer's RSA key fingerprint is:
[36 digit code] Example:
C8:A17:E2:01:F6:A1
:368:10:E8:33:20:FB:
93:7D
Always allow from this computer (it's my computer so I clicked it since I trust the computer)
CANCEL / ALLOW (I clicked ALLOW)
Typed in terminal:
adb reboot bootloader
The phone reboots. Once the phone screen boots, in the center it says: Now you are in fastboot mode.
From the terminal I typed:
fastboot oem nubia_unlock NUBIA_NX659J
The terminal now displayed:
...
(bootloader) START update nubia fastboot unlock flag!!!
(bootloader) START set state to 1 ok!!!
In the terminal I typed:
fastboot flashing unlock *** DO NOT TYPE THIS IF YOU WANT TO KEEP A WORKING FP!!! READ TOP OF POST!!! AVOID THIS WITH THE EXPERIMENTAL METHOD OF ROOT WITH NO BL UNLOCK ***
Now a screen appeared on the phone with a big <!> red icon in the left corner. The rest in white text is a warning message. "By unlocking the bootloader, you will be able to install custom operating system on this phone. A custom OS is not subject to the same level of testing as the original OS, and can cause your phone and installed applications to stop working properly-
Software integrity cannot be guaranteed with a custom OS, so any data stored on the phone while the bootloader is unlocked may be at risk.
To prevent unauthorized access to your personal data, unlocking the bootloader will also delete all personal data on your phone.
Press the Volume keys to select whether to unlock the bootloader, then the Power Button to continue."
I selected UNLOCK BOOTLOADER and my device was completely erased. The factory OS loaded then. This process takes some time to complete.
Now the device rebooted with a warning message, and a big <!> yellow icon in the left corner.
"The boot loader is unlocked and software integrity cannot be guaranteed. Any data stored on the device may be available to attackers. Do not store any sensitive data on the device.
Visit this link on another device:
g.co/ABH"
Now the device reloads the firmware apparently and wipes all user data. Upon setting up the phone, the fingerprint display registration comes up and asked to place my finger on the back of the phone. There is no fingerprint sensor on the back of the Redmagic 5G! It is under the screen! So this step must be skipped. The ROM setup is corrupt or incomplete, a beta possibly. I setup the phone then went into Settings / Security to try to add a fingerprint. The button to add fingerprint then appears. Once I click the button, I get this error:
Loss of fingerprint calibration data
Loss of fingerprint calibration data was detected.
Currently unable to complete fingerprint entry,
please contact Nuia after-sales service via
4007006600
See the XDA post for recalibrating the FP: https://forum.xda-developers.com/nu.../guide-calibration-finger-print-loss-t4132961
ROOT FOR ALL DEVICES:
(These files are included in the tools download zip, Magisk 20.4 and MagiskManager-v7.5.1.apk, but this is the official source as updates post): Go to XDA and Download Magisk Manager and install the APK. Download the latest Magisk as well from the Manager. You can then reboot to Recovery (volume up + power, release the power button once the screen shows it loading, hold the volume up down until you see TWRP pop up). Flash Magisk from TWRP Install / Zip / sdcard / Magisk.zip reboot and you'll have root.
BL unlock first method was tested on North American variant and it works. But it breaks your FP sensor and gives you an annoying boot prompt.
If at any time you want to remove the OEM Bootloader unlock, you plug into the PC, go to the terminal for Minimal ADB and Fastboot, type:
adb reboot fastboot
fastboot oem nubia_unlock NUBIA_NX659J
fastboot flashing lock (screen will prompt to relock BL, choose to Relock)
The phone should reboot and install the original software. BUT...
If it says you are corrupted well, you have more issues.
You'll have to reflash the stock recovery.img, reboot to stock recovery, wipe data, wipe cache, and flash the CN update.zip rom to a flash drive FORMATTED TO FAT32 (annoying as hell) But you NEED a USB-C to OTG Adapter to attach a Flash Drive / SDCARD this way). If you don't have one, you better reflash TWRP using the prior instructions and flash the update.zip from there. Install, select the update.zip, flash. Wipe Data, Cache, ART/Dalvik. Reboot.
Now it should WIPE the entire phone and be back to normal Android 10 setup non rooted, no unlocked bootloader. Always beware of data loss doing root functions!!! Always be prepared to setup your phone entirely over again. Google Backup is very good to turn on before you do any of this stuff if you have already installed apps.
*** WARNING - THIS BYPASS METHOD COULD GO AWAY AT ANYTIME. IT SHOULD EVENTUALLY BE FIXED BY NUBIA ***
mslezak said:
{Mod edit}
***Bootloader Unlock Instructions for the Nubia Redmagic 5G + installing TWRP:***
Settings / About phone / Build # click 7 times, now your a dev message appears, good back a menu, go to Additional Settings / Developer Options
Enable:
ADB debugging, + OEM unlock
Connect phone to PC, approve device on phone RSA key for USB debugging
From Minimal ADB and Fastboot:
adb reboot bootlader
fastboot oem nubia_unlock NUBIA_NX659J
fastboot flashing unlock
(approve on phone with volume keys to unlock and hit the power button, now you'll get an annoyng mesage on boot as insecure unlocked BL) *ALL YOUR DATA WILL BE WIPED*
Next:
fastboot flash recovery recovery-TWRP-3.4.1B-0324-NUBIA_REDMAGIC_5G-CN-wzsx150.img
fastboot reboot recovery
Enter TWRP, set to not be removed by updates if prompted.
Boot up the device, setup as a new device. You're on stock ROM / kernel now unlocked.
Once you get up and running you'll want APK Mirror app to install stuff on the China Variant it's in the Nubia Playstore. Gboard download as well and set as default it's a lot easier than the Chinese keyboard that swaps between Chinese and English. Set size extra tall for this huge phone (I prefer anyhow). Chrome go download it from APK Mirror app as well. Then go to XDA and Download Magisk Manager and download it and install the APK. Download the latest Magisk as well from the Manager. You can then reboot to Recovery (volume up + power). Flash Magisk from TWRP reboot and you'll have root.
Note on my testing the fingerprint did not work after unlocking the bootloader. It says to contact Nubia support at some odd number. Hopefully they fix this.
Click to expand...
Click to collapse
You were able to actually install TWRP? Not just boot it? I thought A10 devices cant have twrp permanently installed?
That is a very good question my friend. I had to reflash it several times while rooting so it appears you are correct.
Now a window when I FIRST installed popped up and said make Recovery read only so a system update. can't overwrite it, to this I didn't even pay attention. So assuming that question does lock down recovery, it should stick.
mslezak said:
That is a very good question my friend. I had to reflash it several times while rooting so it appears you are correct.
Now a window when I FIRST installed popped up and said make Recovery read only so a system update. can't overwrite it, to this I didn't even pay attention. So assuming that question does lock down recovery, it should stick.
Click to expand...
Click to collapse
So its not permanent? Thats what I thought.
Well it could be permanent...
VZTech said:
So its not permanent? Thats what I thought.
Click to expand...
Click to collapse
What I was trying to say is that I've never had a phone where I had to select "prevent recovery from being overwritten" so I just clicked off the message. Had I selected "keep TWRP from being overwritten" then possibly it sticks. It's just a matter of making the recovery partition READ ONLY.
mslezak said:
What I was trying to say is that I've never had a phone where I had to select "prevent recovery from being overwritten" so I just clicked off the message. Had I selected "keep TWRP from being overwritten" then possibly it sticks. It's just a matter of making the recovery partition READ ONLY.
Click to expand...
Click to collapse
The issue with that could be any future updates though. Rm uses there own recovery for that. They don't provide fastboot images either I believe
Can anyone send me backup of the super partition?
I accidentally flashed an image to the super partition with twrp thinking it was the system partition (it technically is tho) and it bricked my phone and messed up twrp.
Only stock recovery works but the stock recovery cannot fix it by installing a full ota from a otg drive.
I do have a backup on my phone but it is inaccessable.
Could anyone please send me a backup of the super partition or have any idea on how to fix this?
(I tried to use edl and backup my data to recover my backup of the super partition but it seemed like it needed a programmer binary from qualcomm)
Future updates...
VZTech said:
The issue with that could be any future updates though. Rm uses there own recovery for that. They don't provide fastboot images either I believe
Click to expand...
Click to collapse
Yes what I've been told by prior Redmagic Users 3 and 3S is the ROM is released, as long as your boot.img is not patched with Magisk, it can be installed through the menus in Settings / About Phone / Update or someplace like that. You just download the ROM to the appropriate folder on the phone.
So far I have 1 link to a China ROM update here: https://ui.nubia.cn/rom/detail/65
Now on how to install the ROM, I use the Chrome browser set to autotranslate webpages. Most of the Chinese will be translated from here: https://bbs.nubia.com//thread-1136030-1-1.html
Basically it's going to wipe your device clean, and you can use a Nubia backup tool which will save all your items to a folder. Which then you should copy to your PC before installing the new ROM. Then it gives you instructions to get that data back onto your updated device.
apersomany said:
I accidentally flashed an image to the super partition with twrp thinking it was the system partition (it technically is tho) and it bricked my phone and messed up twrp.
Only stock recovery works but the stock recovery cannot fix it by installing a full ota from a otg drive.
I do have a backup on my phone but it is inaccessable.
Could anyone please send me a backup of the super partition or have any idea on how to fix this?
(I tried to use edl and backup my data to recover my backup of the super partition but it seemed like it needed a programmer binary from qualcomm)
Click to expand...
Click to collapse
Your probably screwed. I had this issue on a rm3s. You will need an unbrick tool. It was released for the rm3s about 4 mos after release. NUBIA should have true fastboot images available for download, but they dont.
VZTech said:
Your probably screwed. I had this issue on a rm3s. You will need an unbrick tool. It was released for the rm3s about 4 mos after release. NUBIA should have true fastboot images available for download, but they dont.
Click to expand...
Click to collapse
That's because of the super (dynamic) partition, see from the latest (and only) ROM:
Excerpt of the ROM installation script where it delineates the dynamic vs non dynamic partitions - you have product w/ a file transfer list, then vendor, system, and odm, The other files (boot.img, dtbo.img, splash.img, etc. and other various files) should be flashable with fastboot.
# Update dynamic partition metadata
assert(update_dynamic_partitions(package_extract_file("dynamic_partitions_op_list")));
unmap_partition("product");
block_image_update(map_partition("product"), package_extract_file("product.transfer.list"), "product.new.dat.br", "product.patch.dat");
unmap_partition("vendor");
block_image_update(map_partition("vendor"), package_extract_file("vendor.transfer.list"), "vendor.new.dat.br", "vendor.patch.dat");
unmap_partition("system");
block_image_update(map_partition("system"), package_extract_file("system.transfer.list"), "system.new.dat.br", "system.patch.dat");
unmap_partition("odm");
block_image_update(map_partition("odm"), package_extract_file("odm.transfer.list"), "odm.new.dat.br", "odm.patch.dat");
# --- End patching dynamic partitions ---
apersomany said:
I accidentally flashed an image to the super partition with twrp thinking it was the system partition (it technically is tho) and it bricked my phone and messed up twrp.
Only stock recovery works but the stock recovery cannot fix it by installing a full ota from a otg drive.
I do have a backup on my phone but it is inaccessable.
Could anyone please send me a backup of the super partition or have any idea on how to fix this?
(I tried to use edl and backup my data to recover my backup of the super partition but it seemed like it needed a programmer binary from qualcomm)
Click to expand...
Click to collapse
You should be able to flash the latest ROM via EDL mode if you've ever used EDL mode before, it usually requires shorting pins together in the device, although some recoveries will let you just boot into EDL mode if the phone still boots. It will be detected. Although on this device with the dynamic partition, I don't know how you would flash these in EDL mode... dynamic partitions - you have product w/ a file transfer list, then vendor, system, and odm that do not look like fastboot flashable parts. Possibly the unbrick tool for Redmagic 3/3S could be modified to do this for you.
mslezak said:
That's because of the super (dynamic) partition, see from the latest (and only) ROM:
Excerpt of the ROM installation script where it delineates the dynamic vs non dynamic partitions - you have product w/ a file transfer list, then vendor, system, and odm, The other files (boot.img, dtbo.img, splash.img, etc. and other various files) should be flashable with fastboot.
# Update dynamic partition metadata
assert(update_dynamic_partitions(package_extract_file("dynamic_partitions_op_list")));
unmap_partition("product");
block_image_update(map_partition("product"), package_extract_file("product.transfer.list"), "product.new.dat.br", "product.patch.dat");
unmap_partition("vendor");
block_image_update(map_partition("vendor"), package_extract_file("vendor.transfer.list"), "vendor.new.dat.br", "vendor.patch.dat");
unmap_partition("system");
block_image_update(map_partition("system"), package_extract_file("system.transfer.list"), "system.new.dat.br", "system.patch.dat");
unmap_partition("odm");
block_image_update(map_partition("odm"), package_extract_file("odm.transfer.list"), "odm.new.dat.br", "odm.patch.dat");
# --- End patching dynamic partitions ---
Click to expand...
Click to collapse
Yes those .img files can easily be fastboot flashed. Unfortunately it wont solve his problem. He needs the nubia unbrick tool, which is tough to get. I dont understand why Nubia makes things difficult. They should provide proper Fastboot files.
I already tried edl (not to flash, but to recover my backup of the super partition) but it seems like it needed a firehose binary. I still can use bootloader, fastbootd, recovery. It's just that the recovery fails at assert dynamic partition update thing with a error 7 (probably because my super partition turned into a normal partiton). I tried to flash a super empty image made with lpmake and try flashing the ota but that didn't work. I think if someone gives me a backup of the super partition I could flash that and that could work. I also had an idea of flashing a super partition of another devices factory image to make my super partition a dynamic partition, but I couldn't find any online.
apersomany said:
I already tried edl (not to flash, but to recover my backup of the super partition) but it seems like it needed a firehose binary. I still can use bootloader, fastbootd, recovery. It's just that the recovery fails at assert dynamic partition update thing with a error 7 (probably because my super partition turned into a normal partiton). I tried to flash a super empty image made with lpmake and try flashing the ota but that didn't work. I think if someone gives me a backup of the super partition I could flash that and that could work. I also had an idea of flashing a super partition of another devices factory image to make my super partition a dynamic partition, but I couldn't find any online.
Click to expand...
Click to collapse
I get a Global Device on Monday. I'll try to use Qualcomm tools to make a brick restore image of Global. If I get one made I'll post all the tools to restore the device on Mega.nz. Because of the super partition it has to be done this way. Not via TWRP as you know. I'm working on Dev tools for this device as fast as possible.
mslezak said:
I get a Global Device on Monday. I'll try to use Qualcomm tools to make a brick restore image of Global. If I get one made I'll post all the tools to restore the device on Mega.nz. Because of the super partition it has to be done this way. Not via TWRP as you know. I'm working on Dev tools for this device as fast as possible.
Click to expand...
Click to collapse
Thank you so much!
Okay I can't add anything special but daaamn this community is amazing. So much help I love you all
To relock BL repeat the instructions with 1 different command
Just replace
fastboot flashing unlock
with
fastboot flashing lock
Again you approve to lock on the phone prompt with the volume keys and your phone will be wiped and all will be back to normal, you'll be locked. And back to phone setup.
I'd edit the original post but the moderators took away my rights!!! Because I posted a Telegram link WHY - how do you expect development to get better???
BTW anyone with a NEW phone arriving that can record the FP failures and all errors please contact me so I can send to Nubia. They are waiting for me to reproduce the error but I already setup my new phone... Thinking I wouldn't be the ONLY ONE to contact [email protected] ... Guys you want developer support on this phone or not. Contribute please.
mslezak said:
{Mod edit}
***Bootloader Unlock Instructions for the Nubia Redmagic 5G + installing TWRP:***
Settings / About phone / Build # click 7 times, now your a dev message appears, good back a menu, go to Additional Settings / Developer Options
Enable:
ADB debugging, + OEM unlock
Connect phone to PC, approve device on phone RSA key for USB debugging
From Minimal ADB and Fastboot:
adb reboot bootlader
fastboot oem nubia_unlock NUBIA_NX659J
fastboot flashing unlock
(approve on phone with volume keys to unlock and hit the power button, now you'll get an annoyng mesage on boot as insecure unlocked BL) *ALL YOUR DATA WILL BE WIPED*
Next:
fastboot flash recovery recovery-TWRP-3.4.1B-0324-NUBIA_REDMAGIC_5G-CN-wzsx150.img
fastboot reboot recovery
Enter TWRP, set to not be removed by updates if prompted.
Boot up the device, setup as a new device. You're on stock ROM / kernel now unlocked.
Once you get up and running you'll want APK Mirror app to install stuff on the China Variant it's in the Nubia Playstore. Gboard download as well and set as default it's a lot easier than the Chinese keyboard that swaps between Chinese and English. Set size extra tall for this huge phone (I prefer anyhow). Chrome go download it from APK Mirror app as well. Then go to XDA and Download Magisk Manager and download it and install the APK. Download the latest Magisk as well from the Manager. You can then reboot to Recovery (volume up + power). Flash Magisk from TWRP reboot and you'll have root.
Note on my testing the fingerprint did not work after unlocking the bootloader. It says to contact Nubia support at some odd number. Hopefully they fix this.
Click to expand...
Click to collapse
Just in case if somebody need a Chinese version of official ROM v2.46 for RedMagic 5G.
Code:
https://mega.nz/file/vc0DiabR#npahTop-JXZ9Mwv-lA7G6DxTG2qqOOAf6AwW8NdEEKw
mslezak said:
Just replace
fastboot flashing unlock
with
fastboot flashing lock
Again you approve to lock on the phone prompt with the volume keys and your phone will be wiped and all will be back to normal, you'll be locked. And back to phone setup.
I'd edit the original post but the moderators took away my rights!!! Because I posted a Telegram link WHY - how do you expect development to get better???
BTW anyone with a NEW phone arriving that can record the FP failures and all errors please contact me so I can send to Nubia. They are waiting for me to reproduce the error but I already setup my new phone... Thinking I wouldn't be the ONLY ONE to contact [email protected] ... Guys you want developer support on this phone or not. Contribute please.
Click to expand...
Click to collapse
we found out that using the cn rom it all works without even unlocking the bootloader, even while oem unlock was disabled in dev options but there is some kind of vbmeta img required. a full guide is incoming.
VZTech said:
The issue with that could be any future updates though. Rm uses there own recovery for that. They don't provide fastboot images either I believe
Click to expand...
Click to collapse
You can flash their NX659J-update.zip files directly from TWRP that's how we restored our bricked devices already. So OTA updates no, but you can download them anyway and flash from TWRP directly. Yes we have to figure out a concrete restore method which isn't 100% working yet. I.e. all your data is lost this way apparently AT THIS MOMENT... MORE TO COME.