Wrong AutoRec version ... now stuck - G2 Q&A, Help & Troubleshooting

i had been distracted and downloaded and installed the wrong version of autorec. now i am stuck in the fast boot loader screen , i cant format to factory , the download mode blinks then goes right into fast boot mode. im left with not many options. does anyone anyone out there know how to fix this and can help me ... i really ned my phone back asap..
thank you for your time ...

tankcircuit said:
i had been distracted and downloaded and installed the wrong version of autorec. now i am stuck in the fast boot loader screen , i cant format to factory , the download mode blinks then goes right into fast boot mode. im left with not many options. does anyone anyone out there know how to fix this and can help me ... i really ned my phone back asap..
thank you for your time ...
Click to expand...
Click to collapse
Set up adb using this guide
Then use this to bring back download mode and restore stock firmware

Art Vanderlay said:
Set up adb using this guide
Then use this to bring back download mode and restore stock firmware
Click to expand...
Click to collapse
i actually did do this with these steps . now i am stuck on just a lg logo and will not do anything except go into download mode. but my issue now is that im having a hard time getting the drivers to install . cdc modem ect. and will not push a kdz file on to it

tankcircuit said:
i actually did do this with these steps . now i am stuck on just a lg logo and will not do anything except go into download mode. but my issue now is that im having a hard time getting the drivers to install . cdc modem ect. and will not push a kdz file on to it
Click to expand...
Click to collapse
it seems like the phone is completely blank now. with nothing on it .. no partitions anything.

Maybe you should charge your phone and downloand the drivers and setup on your pc. Than try to flash kdz

when you try entering download mode is it entering dld mode or are there just the blue circles ?

Related

[Q] lge400 bricked need help im a newbie

hi, im new here and i need help i've got a problem on my lg optimus l3. I think my phone was bricked. i can no longer access recovery mode but i still can go to emergency mode. then i tried to use kdz and it try to bring it back to the old l3 which is ginger bread.. oh by the way im using cm9 and sdmerge that time when suddenly my phone restarted and open then restart again.. non stop restarting.. so i decided to format it.. but when i reformat it my memory became 15mb only..
thats the time i tried to use kdz.. but when i used kdz to flash the old firmware im getting an error.. that was the time i can no longer acess my recovery mode. and also when im in emergency mode my pc is not recognizing my phone.. ive redownload and reinstall all the drivers but still no luck..
now i cant open my phone.. it always stuck in lg logo and go to white screen and back to lg logo again..
please someone help me..:crying::crying:
LGE400Addict said:
hi, im new here and i need help i've got a problem on my lg optimus l3. I think my phone was bricked. i can no longer access recovery mode but i still can go to emergency mode. then i tried to use kdz and it try to bring it back to the old l3 which is ginger bread.. oh by the way im using cm9 and sdmerge that time when suddenly my phone restarted and open then restart again.. non stop restarting.. so i decided to format it.. but when i reformat it my memory became 15mb only..
thats the time i tried to use kdz.. but when i used kdz to flash the old firmware im getting an error.. that was the time i can no longer acess my recovery mode. and also when im in emergency mode my pc is not recognizing my phone.. ive redownload and reinstall all the drivers but still no luck..
now i cant open my phone.. it always stuck in lg logo and go to white screen and back to lg logo again..
please someone help me..:crying::crying:
Click to expand...
Click to collapse
does your phone come-up with blank (black but backlit) screen ?
if it does then you will be able to use kdz updater in attached link LG-RDTT_1.0.5.4 (needs included windows enabler for this version)
use THIS GUIDE to flash just skip the hosts file editing steps
and let us know
LG-RDTT_1.0.5.4
IGGYVIP said:
does your phone come-up with blank (black but backlit) screen ?
if it does then you will be able to use kdz updater in attached link LG-RDTT_1.0.5.4 (needs included windows enabler for this version)
use THIS GUIDE to flash just skip the hosts file editing steps
and let us know
dl.xda-developers.com/attachdl/8c343b1d694e531790a4bedc4a0d3dc3/530e4e21/2/5/9/9/9/3/9/LG-RDTT_1.0.5.4.zip
Click to expand...
Click to collapse
ok i will try thanks.. i will let you know immediately. where can i get that LG-RDTT something?
sorry for the bad english
LGE400Addict said:
ok i will try thanks.. i will let you know immediately. where can i get that LG-RDTT something?
sorry for the bad english
Click to expand...
Click to collapse
my computer doesnt recognizing my phone when in emergency mode..
i dont know what to do in the files ive downloaded.. i followed all the instruction..
can you give me pictures or videos...
my phone is not booting and its going white screen and back to lg logo again..
when i try to use VOLUME - plus home and POwer button.. its stuck in lg logo..
when i connect it in pc in that situation the computer reconize my phone but with some failed installing deivce..
i know im doing something wrong but i cant figure it out.. coz im not an expert..
im losing hope that i can bring back my long time lge400 friend..

STUCK at LG Logo, NO Download mode..Please HELP!!

hi all,
I have posted my G2 problem in another thread but was hoping more people can see it and help me...
PHONE Stuck at LG Logo after power up.
NO Download Mode,
here goes..
Believed I was conned... and this could be what happened to my LG G2 'D802':
my mobile is actually a D801 phone (motherboard) NOT D802 but loaded with D802 ROM
Phone was flashed (by me) with D802 ROM to remove error "Unfortunately, the process com.android.systemui has stopped" caused by corrupted Build.Prop system file during some editing.
touch screen error after new ROM was flashed (tried many diff roms), likely due to incompatible phone settings.
unable to flash D801 kdz since the phone was configured to 'D802', incorrect model detected while trying to flash.
managed to get a D801 TOT file that can resolved the incompatible model issue
Flash completed, phone rebooted..STUCKED at LG LOGO!
pressed Vol+ and USB cable, cannot enter download mode...stucked..
Factory reset using hardware keys, same problem..
please help ! any suggestion/s would be greatly appreciated!! thank you!!
TEDET123 said:
hi all,
I have posted my G2 problem in another thread but was hoping more people can see it and help me...
PHONE Stuck at LG Logo after power up.
NO Download Mode,
here goes..
Believed I was conned... and this could be what happened to my LG G2 'D802':
my mobile is actually a D801 phone (motherboard) NOT D802 but loaded with D802 ROM
Phone was flashed (by me) with D802 ROM to remove error "Unfortunately, the process com.android.systemui has stopped" caused by corrupted Build.Prop system file during some editing.
touch screen error after new ROM was flashed (tried many diff roms), likely due to incompatible phone settings.
unable to flash D801 kdz since the phone was configured to 'D802', incorrect model detected while trying to flash.
managed to get a D801 TOT file that can resolved the incompatible model issue
Flash completed, phone rebooted..STUCKED at LG LOGO!
pressed Vol+ and USB cable, cannot enter download mode...stucked..
Factory reset using hardware keys, same problem..
please help ! any suggestion/s would be greatly appreciated!! thank you!!
Click to expand...
Click to collapse
use flashtool with another *dll
His download mode is not functional.
When in factory reset - connect to pc(does it throw errors or add a new device?)
If yes..then - read this
If no then still read it.
bender_007 said:
His download mode is not functional.
When in factory reset - connect to pc(does it throw errors or add a new device?)
If yes..then - read this
If no then still read it.
Click to expand...
Click to collapse
thanks for replying guys..appreciate it!
yes..download mode is not functional.
When connect to pc at 'Factory hard reset mode' screen (vol- and pwr pressed, letgo and pressed)..nothing happens on either PC or Mobile..
After Hard reset, phone continue stuck at LG LOGO.. PC detected mobile as "LGE AndroidNet USB Serial Port (COM41)", see attached.
I have tried the method in the link above but the PC seems cannot detect phone during cmd "ls /dev/sd*" and "gdisk -l /dev/sdb" .
someone please help..
TEDET123 said:
someone please help..
Click to expand...
Click to collapse
Hey,
I'm currently having some issue too but not the same it seems ..
Have you tried this: http://forum.xda-developers.com/showthread.php?t=2656275 ?
Hope it will help!
shark_max said:
Hey,
I'm currently have some issue too but not the same it seems ..
Have you tried this: http://forum.xda-developers.com/showthread.php?t=2656275 ?
Hope it will help!
Click to expand...
Click to collapse
hey thanks!
i have tried the method in the link but mobile cannot get into download mode...:crying::crying:
TEDET123 said:
hey thanks!
i have tried the method in the link but mobile cannot get into download mode...:crying::crying:
Click to expand...
Click to collapse
But you did in one of your screenshot ...
Anyway, when you let the phone continue to boot, what happend? lot of force close?
Edit : Antoher solution : have you tried to use the official LG Support tool? I did once when my device was completely f****ed up and it restored it by itself!
TEDET123 said:
hey thanks!
i have tried the method in the link but mobile cannot get into download mode...:crying::crying:
Click to expand...
Click to collapse
Just plug your cable to usb. Turn off phone and inmediately hold the button up and ull be in download mode.
Or If U have 801 rom try to root your phone and do recovery as 801 phone, after flash 802 rom !
shark_max said:
But you did in one of your screenshot ...
Anyway, when you let the phone continue to boot, what happend? lot of force close?
Edit : Antoher solution : have you tried to use the official LG Support tool? I did once when my device was completely f****ed up and it restored it by itself!
Click to expand...
Click to collapse
the screenshot stays forever (trying to get into download mode) and did not enter the actual download screen.
if continue to boot, the phone will just hang at LG Logo.
shark_max said:
But you did in one of your screenshot ...
Anyway, when you let the phone continue to boot, what happend? lot of force close?
Edit : Antoher solution : have you tried to use the official LG Support tool? I did once when my device was completely f****ed up and it restored it by itself!
Click to expand...
Click to collapse
LG Support tool was unable to detect my phone..
patriky said:
Just plug your cable to usb. Turn off phone and inmediately hold the button up and ull be in download mode.
Or If U have 801 rom try to root your phone and do recovery as 801 phone, after flash 802 rom !
Click to expand...
Click to collapse
I did this but phone just stays at the 2nd screenshot...
before it was bricked, I have no problem get it into download mode with vol+ and usb cable.
TEDET123 said:
LG Support tool was unable to detect my phone..
Click to expand...
Click to collapse
Wait so what can you do? Hard reset? Download mode? Nothing?
Can you plug your phone and check that your phone is not detected in device manager?
All the drivers are installed?
Same issue
I am having the same exact issue as TEDET123. !!! installed ubunto in one of my PC, tried the same procedure as explain at
http://forum.xda-developers.com/showthread.php?t=2582142&highlight=even+disconnect+lg+phone.
the ubuntu doesn't show any SDB !! need help!!! went to the famous lg software guy in my town. He said MMC chip needs to be replaced ! I knw he doesn;'t have its solution and trying to demotivate me thats it! I knw there must be a solution to this issue!
I would try to force the phone into qhsusb mode then flash only laf.img,aboot.img and boot.img
In qhsub mode you should be able to see the SDB partition
http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
FaseehUllah said:
I am having the same exact issue as TEDET123. !!! installed ubunto in one of my PC, tried the same procedure as explain at
http://forum.xda-developers.com/showthread.php?t=2582142&highlight=even+disconnect+lg+phone.
the ubuntu doesn't show any SDB !! need help!!! went to the famous lg software guy in my town. He said MMC chip needs to be replaced ! I knw he doesn;'t have its solution and trying to demotivate me thats it! I knw there must be a solution to this issue!
Click to expand...
Click to collapse
Same problem.
Same problem
now can i go back to fast boot mode?
someone please help..
Same problem, please helpp
Same Problem ...... flashing unknown rom and now stuck on LG logo and not entering to download mode please help !! Experts ??

Lg g2 stuck in boot loop, vzw i have tried everything need serious help!!!!!!!!!!!

Been running pac rom, tried installing a custom ROM that was almost stock kitkat for Verizon. Forgot to wipe i think, and now i have been screwed since. Stuck in boot loop. Factory reset can be reached, but screen goes black everytime and doesnt allow me to get into TWRP. Only thing accessiable is download mode. But device is not recongized in adb, only when its bootlooping. But it is recognized in devices and printers in bootloop. New computer also, no RSA authentication, while in bootloop ive tried to adb boot recovery commands, but no authorization. Im completly stuck and have been for days, ive read so many posts but everything i have found doesnt match all my problems. and most people dont read the entire post or problem before submitting a dumb answer, which is a duh i tried that kind of thing thanks for nothing. SO PLEASE HELP IF YOU CAN THINK OF ANYTHING ELSE. IM GOING CRAZY OVER HERE AND LOOSING MY MIND> WHO EVER CAN HELP ME, IS GOD AND SHOULD BE CONSIDERED TOP DOG GENIOUS>
When you get to the white Factory Reset screen, pressing the power button 3 or 4 times won't get you back into TWRP?
Well u press it once to give conform option, and the second time, turn it black
lg flash tool
that doesnt work because it thinks its got the latest version. I need some real help bad, its so hard not having my phone. This would be easy if my laptop didnt get stolen that had authorization to do cmd commands. Anyways, really need some brain power put togeaher on this on and \fast. Is anyone down with maybe skyping with me, to visually see whats going on and troubleshoot it as if you were remoting into a computer. Just tell me what to do!!!> Please you have no idea how much I would love someone if they did. Its been driving me balls for weeks now. I NEED SOMEONES HELP
seriously, no one can help?
millzdog said:
seriously, no one can help?
Click to expand...
Click to collapse
lg tool works.. can u go into download mode?? just need to tweak lg tool with offline script
33709
Croize said:
lg tool works.. can u go into download mode?? just need to tweak lg tool with offline script
Click to expand...
Click to collapse
Yes i can go into download mode, please show me how to tweak
millzdog said:
Yes i can go into download mode, please show me how to tweak
Click to expand...
Click to collapse
Use the official lg support tool to restore it if you can enter downloadmode!!!!
http://forum.xda-developers.com/showthread.php?t=2432476
vs98010b stock rooted

D800 I'm sure it's bricked, just want clarification

Alright, so I'm stuck in boot loop, the only recovery I can boot into is stock, which doesn't help obviously. I can't get into download mode, and my computer doesn't detect it. Just tell me the bad news.
Have you removed the LG drivers completely and reinstalled them? How did you get into the bootloop in the first place?
Sent from my LG-D800 using XDA Premium 4 mobile app
whynottry said:
Alright, so I'm stuck in boot loop, the only recovery I can boot into is stock, which doesn't help obviously. I can't get into download mode, and my computer doesn't detect it. Just tell me the bad news.
Click to expand...
Click to collapse
Let me see.. If by download mode you mean the blue dots(circles) then - no, you're not in download mode. But if you can enter teh real download mode (it should go past the circles) then you can flash it ( you should be able to flash it).
More info please.
bender_007 said:
Let me see.. If by download mode you mean the blue dots(circles) then - no, you're not in download mode. But if you can enter teh real download mode (it should go past the circles) then you can flash it ( you should be able to flash it).
More info please.
Click to expand...
Click to collapse
There's a lot of info in his previous posts. We went through hell and back trying to fix it. Hopefully you can give some better guidance.
Art Vanderlay said:
There's a lot of info in his previous posts. We went through hell and back trying to fix it. Hopefully you can give some better guidance.
Click to expand...
Click to collapse
Damn. I've read "I CAN get into download mode and ...." :/
will look into it to help out
one question : how did you brick it ?
Let me copy paste my previous three posts.
"When I originally tried to install TWRP, I was rooted in a stock rom, or whatever you call it when you're rooted and haven't installed a rom yet. When I tried originally, I went through CWM and installed it through that, but whenever I rebooted into recovery, I got the android with the caution sign in its chest. I kept trying to install it, and eventually I believe I used the flashify app to install it(the version I believe was 2.6.3.3) and I tried to boot again and it went into a boot loop, and began making a bunch of drives. I used this http://forum.xda-developers.com/show....php?t=2582142to get me into TWRP, and it worked. Problem is, I have no roms, no backups, no download mode, and my computer only recognizes my phone as 'g2'. I tried to install adb drivers manually so that the computer would recognize it as an adb device, but it gave me error:closed, and that's where we are right now. Quite a hole I have dug myself into, huh?"
"Ok, so I went back into linux -- I have dual boot for windows 7 and ubuntu -- and for some reason adb worked there, so I was able to adb sideload a cwm .img. But of course, I got excited because I thought it would just fix it but now I'm stuck in fastboot mode, and still can't get into download mode."
"I tried it, and now it is stuck in a bootloop and isn't detected by my computer. Only thing I can boot into is stock recovery. Looks like this is the end of my G2.."
I truly do think there's nothing that can be done, just from a logical standpoint. It isn't detected by anything on the computer and can only boot stock recovery which doesn't help at all. I do appreciate the help, though.
bender_007 said:
Damn. I've read "I CAN get into download mode and ...." :/
will look into it to help out
one question : how did you brick it ?
Click to expand...
Click to collapse
Ugh..so no fastboot either :/
fastboot was good.

Hard brick SM-N910F

Tried installing custom recovery didn't work out like I had hoped now im stuck with a phone that isn't detected by odin or kies but by MiFlash
Please tell me there is something I can do to fix it or get it to some sort of working order..? Is there a jtag tool or usb jig I can use?
Update - I found out the phone was still under warranty so I sent it away to be repaired. It was repaired and I now have a working phone !
ylmcc said:
Tried installing custom recovery didn't work out like I had hoped now im stuck with a phone that isn't detected by odin or kies but by MiFlash
Please tell me there is something I can do to fix it or get it to some sort of working order..? Is there a jtag tool or usb jig I can use?
Click to expand...
Click to collapse
What have you done to reach that state? I know that you're desperate but you must give some details if you want help.
It was given to me with 5.1.1 installed however it failed mid process and while on 5.1.1 it kept freezing and acting weird such as boot with weird errors and they only appeared after it was updated, I decided to root it with odin and it never fully rebooted after the was root applied. I finally got it to boot to stock and rooted and decided to install a custom recovery which was twrp while selecting the recovery it said if its a wrong location it will brick, with this in mind I checked the model with the one on their site and it seemed to make sense and applied it.
This caused the original problem which made it boot straight to download mode with it saying it could not normal boot. I then googled the problem and one said the pit was corrupted and downloaded the correct file. I then applied this through odin with stock firmware and it refuse to flash. At the time I was thinking a restart on the device would help, but it resulted in not booting at all and not being detected....
It does not light up or make a vibration when its connected or powered on if there is any solution it would be great...
Can anyone help or point in the right direction?
Hard brick SM-910F
Hello! If this is the good recovery for the N910F he would have from start.
Try to boot via the recovery flight up + home + power.
If you TWRP flash a custom in a first time rom
[email protected] said:
Hello! If this is the good recovery for the N910F he would have from start.
Try to boot via the recovery flight up + home + power.
If you TWRP flash a custom in a first time rom
Click to expand...
Click to collapse
Nothing however the pc did detect a new driver called qualcomm hs-usb qdloader 9008
ylmcc said:
Nothing however the pc did detect a new driver called qualcomm hs-usb qdloader 9008
Click to expand...
Click to collapse
qualcomm emergency download mode. is it called.
Tunestwo said:
qualcomm emergency download mode. is it called.
Click to expand...
Click to collapse
Anything I can do to get some sort of os on the phone now?
in this case via Odin tries to reinstall the tar of the official rom N910F .
ylmcc said:
Anything I can do to get some sort of os on the phone now?
Click to expand...
Click to collapse
Can you tell us if you can get on recovery screen, either TRWP or stock, or download mode.
You could try installing these drivers:
https://www.androidfilehost.com/?fid=24499762636000789
Reboot just in case and try to connect your device again.
(In download mode, with the key combination)
mangui said:
Can you tell us if you can get on recovery screen, either TRWP or stock, or download mode.
Click to expand...
Click to collapse
The phone does not display or respond when the keys are pressed, just a black screen..
Battlehero said:
You could try installing these drivers:
https://www.androidfilehost.com/?fid=24499762636000789
Reboot just in case and try to connect your device again.
(In download mode, with the key combination)
Click to expand...
Click to collapse
Chrome detected a virus in the rar
ylmcc said:
The phone does not display or respond when the keys are pressed, just a black screen..
Chrome detected a virus in the rar
Click to expand...
Click to collapse
Really? I just scanned it with VirusTotal and it is clean.
Virus Total Results
32Bit.exe scan results
64Bit.exe scan results
Battlehero said:
Really? I just scanned it with VirusTotal and it is clean.
Virus Total Results
32Bit.exe scan results
64Bit.exe scan results
Click to expand...
Click to collapse
I'll download it again but windows defender detected it too.
Edit - Yep did it again, here is a link to a photo of what I get but from virus total I don't get why its being flagged perhaps false positive ??
Update
Found a jtag service that is cheap will update once I get it back...
sm-n910f
I got a brick note 4 and i want to fix it
I search over the internet for this solution and found a method
Sd card repair boot but it did not work at all
I need help
thank you in advance

Categories

Resources