Related
Disclaimer
What's posted here is tested before sharing
but if something bad happens, it's not my problem.Originally posted @MotoModTR by »CanERYVZ« to restore the stock firmware of any XT1033 converted to XT1032 GPE 4.4.2 with deej_roamer's instructions posted here,then OTA'd to GPE 4.4.4. I'm just sharing, all credits to »CanERYVZ« :good:
Your device will be restored to XT1033 Asia.retail 4.4.2 successfully
TESTED and WORKS for XT1033 Asia Retail Dual-Sim version.
1- Download 4.4.2 stock version for your device RETAIL-AS_FALCON_KXB20.25-1.31_cid7_CFC_1FF.xml.zip
1a- Extract firmware to c:\retail
2- Download stock OTA 4.4.4 file for XT1033 Blur_Version.171.44.31.falcon_umtsds.AsiaRetail.en.03.zip
2a- Extract just the 3 files "gpt.bin", "logo.bin" and "emmc_appsboot.mbn" to c:\retail and overwrite the old ones.
3- Download mfastboot-adb.rar
3a- Extract mfastboot-adb.rar to c:\retail
4- Open CMD (command prompt) and go to C:\retail (type cd c:\retail in cmd)
Note: you need to run command prompt as administrator.
4a- Type the following commands one by one:
Code:
mfastboot flash aboot emmc_appsboot.mbn
mfastboot flash partition gpt.bin
mfastboot reboot-bootloader
mfastboot getvar max-sparse-size
mfastboot oem fb_mode_set
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot oem fb_mode_clear
mfastboot reboot
5- Go to stock recovery. Wipe data / factory reset and wipe cache for a clean start.
ps : motoboot partition will result error because we don't have it in the moto 4.4.4 ota file, just don't worry and continue. :good:
Greetings. :highfive::good:
So, this will restore the mobile from GPE to Stock 4.4.4 with dual sim capability ?
When does the android s friends
No,
This will restore XT1033 from GPE 4.4.4 to Moto 4.4.2 , but if you like you can OTA to Moto 4.4.4.
When does the android l friends
Awesome, but i have a question.
Some people just take the gpt.bin, replace it to 4.4.2 firmware pakage and flash without flashing motoboot.img.then ok.
Some people take logo.bin too.
But i did not see anyone take the emmc_appsboot.mbn. can u explain what is emmc_appsboot.mbn
Sorry for being noob.
Btw, how many devices did u test?
Sent from my SM-G900F using Tapatalk
@windylawyer.1712,
Hi,
i need to say that i'm a noob when it comes to qualcomm platform but after a little research in google, i got some results and to my understanding ;
emmc_appsboot.mbn which is flashed into aboot partition keeps information about the emmc file system structure. So what's aboot partition ? I'll quote from Master Dan Rosenberg here.
aboot loads the kernel and ramdisk into memory at the addresses requested by the boot image header, and then signature validation is performed after this loading is complete. Because the boot image header is read straight from eMMC flash prior to any signature validation, it contains essentially untrusted data. As a result, it's possible to flash a maliciously crafted boot image whose header values cause aboot to read the kernel or ramdisk into physical memory directly on top of aboot itself!
Click to expand...
Click to collapse
Other methods that i've seen without the " emmc_appsboot.mbn " flashing step, seems to halt the phone on startup and returns to bootloader menu, then you need to press Normal Powerup to boot the device.
However the method in OP, the phone just boots fine. Hope this helps and if there's something to be corrected, i'd be more than happy to learn something new.
fatihtpr said:
When does the android l friends
Click to expand...
Click to collapse
Hello fatih,
I think XT1032 GPE will get Android L after a month for the Nexus Line. XT1033 or XT1032 moto editions might get it about 3 months...
Semseddin said:
Hello fatih,
I think XT1032 GPE will get Android L after a month for the Nexus Line. XT1033 or XT1032 moto editions might get it about 3 months...
Click to expand...
Click to collapse
Hello şemseddin thank for as ne.
What is the difference between xt 1033 xt1032 and wonder?
fatihtpr said:
Hello şemseddin thank for as ne.
What is the difference between xt 1033 xt1032 and wonder?
Click to expand...
Click to collapse
Xt1032 is one sim version.
Xt1033 is dual sim version
Gửi từ GT-N7105 của tôi bằng cách sử dụng Tapatalk
Thanks windylawyer
Thanks OP...
THANKS!!!
thank youuu good sir! this is total life saver!!
Preflash validation failed
I have got a 1032. Used to have GPE, installed as 4.4.2, OTA upgraded to 4.4.4.
I want to get back the Motorola ROM, 4.4.2, or 4.4.4.
When I tried, I got a few "Preflash validation failed" errors, bootloader complains: "version downgraded for xxx". After the "downgrade" I have got just bootloader and recovery. No sstem can be booted/installed.
I have also tried this script (first few steps), but I have got the same errors for the first 2 commands
Tried with 4.4.2 and 4.4.4 xml.zip versions as well.
Code:
mfastboot flash aboot emmc_appsboot.mbn
mfastboot flash partition gpt.bin
mfastboot reboot-bootloader
mfastboot getvar max-sparse-size
mfastboot oem fb_mode_set
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot oem fb_mode_clear
mfastboot reboot
... and after the whole thing ran, boot process stops in logo (bootloader is open blahblahblah...)
bootloader / recovery can be started, nothing more.
is this method working successfully??
jbanti said:
is this method working successfully??
Click to expand...
Click to collapse
Yes
can i ota after following this procedure to restore to xt1033 firmware?
pfufle said:
can i ota after following this procedure to restore to xt1033 firmware?
Click to expand...
Click to collapse
YES... u can its fully Stock
Sent from my XT1033
Bootloader unlocked flashing and stuck
Semseddin said:
@windylawyer.1712,
Hi,
i need to say that i'm a noob when it comes to qualcomm platform but after a little research in google, i got some results and to my understanding ;
emmc_appsboot.mbn which is flashed into aboot partition keeps information about the emmc file system structure. So what's aboot partition ? I'll quote from Master Dan Rosenberg here.
Other methods that i've seen without the " emmc_appsboot.mbn " flashing step, seems to halt the phone on startup and returns to bootloader menu, then you need to press Normal Powerup to boot the device.
However the method in OP, the phone just boots fine. Hope this helps and if there's something to be corrected, i'd be more than happy to learn something new.
Click to expand...
Click to collapse
please somebody help.....after doing all this my screens blink with logo of BOOTLOADER UNLOCKED........and when i go to the fastbootboot and connect usb it now doesnt recognize it........plz help me save my moto g....plzzzzzzzzzzzzzzzz
The title should have "update"... Thanks autoincorrect.
Sent from my XT1052 using XDA Free mobile app
Mine's just on the way down.
Just got mine but it won't update. I have no idea why. Maybe it's because I have a custom recovery?
It says it's expected to have a version ie victara and I have cm_victara. Any one know how to get this to update? My phone is currently rebooting constantly unless I turn it off myself.
Custom recovery is why. Look for guides to reflash
kboya said:
Custom recovery is why. Look for guides to reflash
Click to expand...
Click to collapse
I just used multi tool to install the stock recovery and wipe but it still won't work. Any ideas?
Please can someone upload the GB Retail firmware for the XT1092 if they have now got this successfully. Thanks!
Thats interesting, so the EU and GB versions have the same baseband.
Might be alright to stick to the EU firmware for now then, maybe it gets the next update faster
There's nothing on the surface to mark it out as being GB specific.
To be fair, I'm not sure a week's update difference is enough for me to care.
transmission1 said:
Please can someone upload the GB Retail firmware for the XT1092 if they have now got this successfully. Thanks!
Click to expand...
Click to collapse
Here you go: http://forum.xda-developers.com/showpost.php?p=57591807&postcount=36
Diesel779 said:
Here you go: http://forum.xda-developers.com/showpost.php?p=57591807&postcount=36
Click to expand...
Click to collapse
Hey any ideas how i can go about installing that? Ive tried to use Multi tool to get stock but now it says my phone is xt1095 but it was originally xt1092 :/ ive tried to find the uk stock firmware but no luck.
AllenLoyola23 said:
Hey any ideas how i can go about installing that? Ive tried to use Multi tool to get stock but now it says my phone is xt1095 but it was originally xt1092 :/ ive tried to find the uk stock firmware but no luck.
Click to expand...
Click to collapse
It's a factory image you can flash it over anything you currently have running. Open the Multi tool folder and you will see some called 'msfastboot' Make a new folder on your desktop and place that in there, then download the factory image I gave you the link for and extract it into the same folder you placed the msfastboot into. Then, whilst in that folder hold the shift key on your keyboard and then right click on your mouse and select 'open a command window here' Then put your phone in fastboot by turning it off and holding the power and volume down keys at the same time. Then, in the terminal you opened earlier type these commands one at a time:
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin (REMOVES YOUR CUSTOM BOOTLOGO (Not neccessary))
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash system system.img_sparsechunk.5
mfastboot flash system system.img_sparsechunk.6
mfastboot flash system system.img_sparsechunk.7
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata (FACTORY RESETS YOUR FLASH MEMORY (Not neccessary))
mfastboot erase customize (REMOVES MOTOMAKER CUSTOMIZATIONS (Not neccessary))
mfastboot erase clogo (REM
mfastboot reboot
AllenLoyola23 said:
Hey any ideas how i can go about installing that? Ive tried to use Multi tool to get stock but now it says my phone is xt1095 but it was originally xt1092 :/ ive tried to find the uk stock firmware but no luck.
Click to expand...
Click to collapse
Multi-Tool is made for the XT1095, so that's probably why. It even says that in the title.
You can use my guide here, to convert your phone back to XT1092 and get RETEUALL instead.
Lafenear said:
Multi-Tool is made for the XT1095, so that's probably why. It even says that in the title.
You can use my guide here, to convert your phone back to XT1092 and get RETEUALL instead.
Click to expand...
Click to collapse
Diesel779 said:
It's a factory image you can flash it over anything you currently have running. Open the Multi tool folder and you will see some called 'msfastboot' Make a new folder on your desktop and place that in there, then download the factory image I gave you the link for and extract it into the same folder you placed the msfastboot into. Then, whilst in that folder hold the shift key on your keyboard and then right click on your mouse and select 'open a command window here' Then put your phone in fastboot by turning it off and holding the power and volume down keys at the same time. Then, in the terminal you opened earlier type these commands one at a time:
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin (REMOVES YOUR CUSTOM BOOTLOGO (Not neccessary))
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash system system.img_sparsechunk.5
mfastboot flash system system.img_sparsechunk.6
mfastboot flash system system.img_sparsechunk.7
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata (FACTORY RESETS YOUR FLASH MEMORY (Not neccessary))
mfastboot erase customize (REMOVES MOTOMAKER CUSTOMIZATIONS (Not neccessary))
mfastboot erase clogo (REM
mfastboot reboot
Click to expand...
Click to collapse
Thanks guys. I'm stuck tho. It says I'm missing AdbWinApi.DLL which is a driver right? I've got AndroidSDK tho so I don't why that's popping up.
AllenLoyola23 said:
Thanks guys. I'm stuck tho. It says I'm missing AdbWinApi.DLL which is a driver right? I've got AndroidSDK tho so I don't why that's popping up.
Click to expand...
Click to collapse
I wouldn't bother with the RETEU version if you're in the UK, the link I gave you is to the official RETGB factory image. As regards your problem try putting the msfastboot in your ADB folder and also extract your RETGB zip into the same folder, then open up a terminal in that folder and run the commands. Also, have you put your phone in fastboot and let Window automatically install the fastboot driver for your device?
Edit to add: If you are having problems though the RETEU is the same and you'll still receive official OTA's in the future. Just try what I typed above and if all else fails follow the other posters guide to install rthe RETEU version.
Diesel779 said:
I wouldn't bother with the RETEU version if you're in the UK, the link I gave you is to the official RETGB factory image. As regards your problem try putting the msfastboot in your ADB folder and also extract your RETGB zip into the same folder, then open up a terminal in that folder and run the commands. Also, have you put your phone in fastboot and let Window automatically install the fastboot driver for your device?
Edit to add: If you are having problems though the RETEU is the same and you'll still receive official OTA's in the future. Just try what I typed above and if all else fails follow the other posters guide to install rthe RETEU version.
Click to expand...
Click to collapse
Got it. I actually almost couldn't find my ADB folder. Somehow I didn't have in C: and had it installed in my documents folder. dumb.
But yeah I managed to get it. This means I get all future OTAs right? and Even if I don't I could still use that method to update? And thanks so much guys. Really appreciate it, I thought I was never going to get Lollipop on this.
AllenLoyola23 said:
Got it. I actually almost couldn't find my ADB folder. Somehow I didn't have in C: and had it installed in my documents folder. dumb.
But yeah I managed to get it. This means I get all future OTAs right? and Even if I don't I could still use that method to update? And thanks so much guys. Really appreciate it, I thought I was never going to get Lollipop on this.
Click to expand...
Click to collapse
Yes, you will get all future OTA's. This is an official RETGB retail image. It's exactly what you would have got if you had received the OTA normally, but instead of upgrading you've done a fresh install.
Diesel779 said:
Yes, you will get all future OTA's. This is an official RETGB retail image. It's exactly what you would have got if you had received the OTA normally, but instead of upgrading you've done a fresh install.
Click to expand...
Click to collapse
Is there a way to flash 4.4.4 images again? i went straight to L when i got my phone and didn't get a chance to test it out on kitkat, but it fails to flash the partition or motoboot image as the current version is too high, do you know how to bypass the checks?
IINexusII said:
Is there a way to flash 4.4.4 images again? i went straight to L when i got my phone and didn't get a chance to test it out on kitkat, but it fails to flash the partition or motoboot image as the current version is too high, do you know how to bypass the checks?
Click to expand...
Click to collapse
don' t worry about this
Diesel779 said:
It's a factory image you can flash it over anything you currently have running. Open the Multi tool folder and you will see some called 'msfastboot' Make a new folder on your desktop and place that in there, then download the factory image I gave you the link for and extract it into the same folder you placed the msfastboot into. Then, whilst in that folder hold the shift key on your keyboard and then right click on your mouse and select 'open a command window here' Then put your phone in fastboot by turning it off and holding the power and volume down keys at the same time. Then, in the terminal you opened earlier type these commands one at a time:
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin (REMOVES YOUR CUSTOM BOOTLOGO (Not neccessary))
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash system system.img_sparsechunk.5
mfastboot flash system system.img_sparsechunk.6
mfastboot flash system system.img_sparsechunk.7
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata (FACTORY RESETS YOUR FLASH MEMORY (Not neccessary))
mfastboot erase customize (REMOVES MOTOMAKER CUSTOMIZATIONS (Not neccessary))
mfastboot erase clogo (REM
mfastboot reboot
Click to expand...
Click to collapse
Thank you for your link.
Could I ask, If i flash this over my european moto x will it turn it into a GB version in settings and receive future OTA updates? I assume it should.
Likewise do I need to unlock my boot loader to flash this, or will putting into fast boot do.
Thanks for your advice in advance.
nookcoloruser said:
Thank you for your link.
Could I ask, If i flash this over my european moto x will it turn it into a GB version in settings and receive future OTA updates? I assume it should.
Likewise do I need to unlock my boot loader to flash this, or will putting into fast boot do.
Thanks for your advice in advance.
Click to expand...
Click to collapse
Yes and yes and no you don' t need to unlock. But why do this as the reteu model received the update before the retgb model, you can just sideload the ota if you didn't get it yet?
Read Before You Flash
A cautionary advice. If you unlock your bootloader the warranty of all non eu devices are lost. Also to claim warranty of an unlocked EU device you'll need to live in the European Union. Also locking the bootloader won't give back the warranty.
If you came on xda to root and modify your phone, you'll probably need to follow these guides first
For instructions regarding installation of stock firmware head over here
To Restore back to stock head over here
Please keep the discussion regarding each topic separate in their individual threads itself. It'll make managing the threads a lot more easier. This thread is for posting stock firmware only
Happy Flashing
Stock Firmware Files for Moto E
Hi guys, this thread is for official stock firmwares for the device Moto E (2015)
Downloads
XT1524 (4G-LTE)
XT1524_RETEUALL_MOTOE2 (4G-LTE) _5.0.2_LXI22.50-13_cid7_subsidy-DEFAULT_CFC.xml
Credits
@lohanbarth for lte firmware
thanks @Lucas Eugene
here are the fastboot code:
mfastboot oem fb_mode_set
mfastboot flash partition gpt.bin
mfastboot flash bootloader bootloader.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash system system.img_sparsechunk.5
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot erase customize
mfastboot oem config carrier vzw
mfastboot oem fb_mode_clear
MOTOEFLASHALL.bat
lohanbarth said:
thanks @Lucas Eugene
here are the fastboot code:
mfastboot oem fb_mode_set
mfastboot flash partition gpt.bin
mfastboot flash bootloader bootloader.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash system system.img_sparsechunk.5
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot erase customize
mfastboot oem config carrier vzw
mfastboot oem fb_mode_clear
MOTOEFLASHALL.bat
Click to expand...
Click to collapse
Thanks I forgot to correct it after seeing the firmware images. Thanks a lot for making the parts more clear
any stock firmware for the XT1527? Its the lte US varient i suppose.
Any firmware for XT1526? 4G US Boost Mobile LTE.
phliptrip said:
Any firmware for XT1526? 4G US Boost Mobile LTE.
Click to expand...
Click to collapse
Not sure this thread is being updated or not but no im afraid.
fix-this! said:
Not sure this thread is being updated or not but no im afraid.
Click to expand...
Click to collapse
Bro at least let the firmware images be released or leaked.
Lucas Eugene said:
Bro at least let the firmware images be released or leaked.
Click to expand...
Click to collapse
i know but i said currently there is no cdma nor US based stock firmware yet from moto. i think users should know that before they try to root or flash anything.
fix-this! said:
i know but i said currently there is no cdma nor US based stock firmware yet from moto. i think users should know that before they try to root or flash anything.
Click to expand...
Click to collapse
Ah! My fault but from what I heard Motorola never releases the firmwares they leak. Also the site as sfdev is down so I think it'll probably take longer
Lucas Eugene said:
Stock Firmware Files for Moto E
Hi guys, this thread is for official stock firmwares for the device Moto E (2015)
Downloads
XT1524 (4G-LTE)
XT1524_RETEUALL_MOTOE2 (4G-LTE) _5.0.2_LXI22.50-13_cid7_subsidy-DEFAULT_CFC.xml
Click to expand...
Click to collapse
@Lucas Eugene
my device is moto e 2015 3g
I unlocked bootloader to root it, after that i read carefully that it meant for LTE version, i then locked the bootloader again without doing anything at same time,
Then when i reboot it gives me "invalid system image" error, and refuses to boot. Then again i unlocked bootloader, it went well, its working
I want to make my device as it was when i purchased it.
Any stock firmware available for my device.
Please suggest some workaround to overcome the above problem.
santoshvaza said:
@Lucas Eugene
my device is moto e 2015 3g
I unlocked bootloader to root it, after that i read carefully that it meant for LTE version, i then locked the bootloader again without doing anything at same time,
Then when i reboot it gives me "invalid system image" error, and refuses to boot. Then again i unlocked bootloader, it went well, its working
I want to make my device as it was when i purchased it.
Any stock firmware available for my device.
Please suggest some workaround to overcome the above problem.
Click to expand...
Click to collapse
You can't reverse time and go back to the original Bootloader state ever. If you lock after unlocking it would just give you a code 1 instead of 3. Also if you live outside the EU your warranty is void as soon as you unlock.
There's no harm to unlock if you don't go further to install unstable operating systems.
Also the firmware for the non lte hasn't been leaked yet
@lohanbarth
can you arrange stock for moto e 2nd gen 3g version?
How about Unlock Bootloader !!
Lucas Eugene said:
Stock Firmware Files for Moto E
Hi guys, this thread is for official stock firmwares for the device Moto E (2015)
Downloads
XT1524 (4G-LTE)
XT1524_RETEUALL_MOTOE2 (4G-LTE) _5.0.2_LXI22.50-13_cid7_subsidy-DEFAULT_CFC.xml
Click to expand...
Click to collapse
Nice!
Now if we could get the stock US version (XT1527_RETUSALL_MOTOE2 (4G-LTE) _5.0.2_LXI22.50-13_cid7_subsidy-DEFAULT_CFC.xml)
will this XT1524 version work for a US 4G-LTE variant XT1527? Would it be possible to flash to this, then unlock the bootloader/root/etc?
Moto E xt1514
Moto E2 xt1514 please
I can help
juniklx said:
Moto E2 xt1514 please
Click to expand...
Click to collapse
I have a New device, non-rooted and original bootloader.
I can help, but, don't knew how.
How make a backup, of all??
Moto E xt1514
juliovieira said:
I have a New device, non-rooted and original bootloader.
I can help, but, don't knew how.
How make a backup, of all??
Click to expand...
Click to collapse
yes please
I have found that the new update is not a newer Android version but a security patch according to identifications made in July 2016.
Total size of update is 508.4 MB.
Some people have reported problems with notification sounds.
Do we have any more news about this update.?
Please upload stock rom for indian variant moto g4plus xt1643
i have installed a stock rom and it was US but now my phone is unable to connect to any wifi or mobile network plz upload anywhere else than filefactory
I have installed the update and everything is working fine for me.
help
jack_04 said:
I have installed the update and everything is working fine for me.
Click to expand...
Click to collapse
can u backup ur rom nd upload
navi74644 said:
can u backup ur rom nd upload
Click to expand...
Click to collapse
My phone is not rooted. So I guess I can not take ROM backup.
no need to be rooted
jack_04 said:
My phone is not rooted. So I guess I can not take ROM backup.
Click to expand...
Click to collapse
just put it in fastboot mode and pull the rom
navi74644 said:
just put it in fastboot mode and pull the rom
Click to expand...
Click to collapse
Can You Tell Me How To pull the rom In fastboot mode?
I hv installed updates..
There is a problem after that..
Sim 1 is automatically Off after sm time..
How is your phone working now?
jack_04 said:
I have installed the update and everything is working fine for me.
Click to expand...
Click to collapse
Motorola claims that they have solved all the reported issues except heating because of its board.
Many people have found that notification volume is decreased to 30%.
Could you share detailed information about what is included in update?
Have you reported this with Motorola?
Milan Samani said:
I hv installed updates..
There is a problem after that..
Sim 1 is automatically Off after sm time..
Click to expand...
Click to collapse
If you are using unrooted phone the I would suggest you to report this with Motorola. Let us know how do they respond and if they are willing to offer any quick solution to this issue.
first thing first: I have rooted using systemless root method. so if I update to this latest patch will I have to root it again? and will it be a complete factory reset or I can expect my apps persisting after update?
Sent from my Moto G (4) using Tapatalk
is there any way to update my unlocked bootloader phone ? I tried everything.. Flashed stock recovery... Unroot my phone.. Flash fire etc. nothing works.. Any suggestion will be appriciate.
navi74644 said:
i have installed a stock rom and it was US but now my phone is unable to connect to any wifi or mobile network plz upload anywhere else than filefactory
Click to expand...
Click to collapse
Same thing happened to me ! What I did is I just gave my mobile to service centre they flashed original firmware( don't forget to remove warning image )
I got this update and after updating, I am facing low notification sound.
Sent from my Moto G (4) using Tapatalk
By my ear notification sound is about 60% what it was before (this is sitting two devices next to each other and comparing the updated device at max volume with the non-updated device, when the nud's volume bar was at ~60℅ they sounded equal). Incidentally 100℅ on the non-updated device was probably a bit too loud.
I've contacted Moto and requested they acknowledge the issue and provide a timeframe for a solution; I have threatened to return both devices to my supplier. I'll share the reply.
The US unlocked XT1644 didnt get any updates. Anybody expecting android 7.0 before the holidays is going to be disappointed.
Pranav Kumar said:
Same thing happened to me ! What I did is I just gave my mobile to service centre they flashed original firmware( don't forget to remove warning image )
Click to expand...
Click to collapse
how to remove warning nd here did get it flashed again i mean which service centre
navi74644 said:
how to remove warning nd here did get it flashed again i mean which service centre
Click to expand...
Click to collapse
relock the bootloader and flash the stock rom again.
steps:
Flashing Stock Firmware:
1) Download firmware for XT1643 from https://drive.google.com/file/d/0B1N...tsRU1RTVk/view
2) Download mfastboot from https://drive.google.com/file/d/0B5j...ew?usp=sharing
3) Extract the firmware into the folder containing mfastboot.
4) Reboot the phone into Bootloader (power off, then press the power and volume down buttons simultaneously).
5) Execute these commands and make sure you receive an 'OKAY' after each command.
Code: just type first mfastboot oem lock,then enter this commands
mfastboot oem lock
mfastboot flash partition gpt.bin
mfastboot flash bootloader bootloader.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash dsp adspso.bin
mfastboot flash oem oem.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash system system.img_sparsechunk.5
mfastboot flash system system.img_sparsechunk.6
mfastboot flash system system.img_sparsechunk.7
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot erase customize
mfastboot erase clogo
mfastboot oem lock
mfastboot reboot
anhoxhrs said:
relock the bootloader and flash the stock rom again.
steps:
Flashing Stock Firmware:
1) Download firmware for XT1643 from https://drive.google.com/file/d/0B1N...tsRU1RTVk/view
2) Download mfastboot from https://drive.google.com/file/d/0B5j...ew?usp=sharing
3) Extract the firmware into the folder containing mfastboot.
4) Reboot the phone into Bootloader (power off, then press the power and volume down buttons simultaneously).
5) Execute these commands and make sure you receive an 'OKAY' after each command.
Code: just type first mfastboot oem lock,then enter this commands
mfastboot oem lock
mfastboot flash partition gpt.bin
mfastboot flash bootloader bootloader.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash dsp adspso.bin
mfastboot flash oem oem.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash system system.img_sparsechunk.5
mfastboot flash system system.img_sparsechunk.6
mfastboot flash system system.img_sparsechunk.7
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot erase customize
mfastboot erase clogo
mfastboot oem lock
mfastboot reboot
Click to expand...
Click to collapse
brother the given link doest not exist plz update ur drive download link it will be highly thankful to u
navi74644 said:
brother the given link doest not exist plz update ur drive download link it will be highly thankful to u
Click to expand...
Click to collapse
Lol this guy who mentioned the stepd just did a copy paste.the url he provided is incomplete.the complete url is - https://drive.google.com/file/d/0B1N6dGU7FEXsSjR3QUtsRU1RTVk/view
Hi, I have looked for this problem, but cannot find any answers. I tried to flash a copy of the official rom on my phone, The bootloader is unlocked but not rooted. It seemed to go well, but now is on a permante startup loop.
I can get into fastboot and recovery, is there any way I can recover from this?
in fastboot it says baseband not found.
Any help will be really appreciated
First I need to know which firmware exactly do you flashed on your device?
Baseband not found is normal...
WoKoschekk said:
First I need to know which firmware exactly do you flashed on your device?
Baseband not found is normal...
Click to expand...
Click to collapse
I'm not sure, can you tell me how to find it,
Sorry for being so stupid
Barb28n said:
I'm not sure, can you tell me how to find it,
Sorry for being so stupid
Click to expand...
Click to collapse
Ok... I guess you flashed the wrong firmware. But that's no problem. Just answer the questions below and you'll get a link to the correct firmware. Once you flash it your device will be fine again.
do you have a moto g6 plus?
where are you from? there are different firmwares
e.g. for Europe, India, etc.
It is the moto g6 plus, international version,
WoKoschekk said:
Ok... I guess you flashed the wrong firmware. But that's no problem. Just answer the questions below and you'll get a link to the correct firmware. Once you flash it your device will be fine again.
do you have a moto g6 plus?
where are you from? there are different firmwares
e.g. for Europe, India, etc.
Click to expand...
Click to collapse
It is the moto g6 plus, international version, bought from Amazon, Just wondering if I had the right firmware, and put it on the sd card,could I flash it from there? the bootloader is unlocked, but not rooted.
Thanks for any help
Barb28n said:
It is the moto g6 plus, international version, bought from Amazon, Just wondering if I had the right firmware, and put it on the sd card,could I flash it from there? the bootloader is unlocked, but not rooted.
Thanks for any help
Click to expand...
Click to collapse
No, you have to flash it via fastboot. However you can also try the Lenovo moto flash tool that does it for you
Barb28n said:
Hi, I have looked for this problem, but cannot find any answers. I tried to flash a copy of the official rom on my phone, The bootloader is unlocked but not rooted. It seemed to go well, but now is on a permante startup loop.
I can get into fastboot and recovery, is there any way I can recover from this?
in fastboot it says baseband not found.
Any help will be really appreciated
Click to expand...
Click to collapse
What exactly have you done...? Do you know how to flash a new firmware or not??
---------- Post added at 05:53 AM ---------- Previous post was at 05:19 AM ----------
A little guide to get the correct firmware for your device:
1. go to fastboot mode
2. type the following command
Code:
fastboot getvar ro.carrier
the output will be:
Code:
ro.carrier: [I]your software channel[/I]
3. follow this link:
https://mirrors.lolinet.com/firmware/moto/evert/official/
and choose "your software channel"
(e.g. reteu / retail / retin, etc.)
4. download the latest firmware
***********************************************
How to flash a new firmware
https://forum.xda-developers.com/g6-plus/how-to/firmware-moto-g6-g6plus-t3789274
But do not use the firmware from this page!!
!!Only use the firmware you downloaded in step 4. !!
juampapo546 said:
No, you have to flash it via fastboot. However you can also try the Lenovo moto flash tool that does it for you
Click to expand...
Click to collapse
Can you explain how to do that please, I think I tried the moto flash tool,and it couldn't find my phone.
Barb28n said:
Can you explain how to do that please, I think I tried the moto flash tool,and it couldn't find my phone.
Click to expand...
Click to collapse
https://forum.xda-developers.com/g6-plus/how-to/firmware-moto-g6-g6plus-t3789274
WoKoschekk said:
https://forum.xda-developers.com/g6-plus/how-to/firmware-moto-g6-g6plus-t3789274
Click to expand...
Click to collapse
Thanks, I will try it, I have done it before,but not for a while. Trying to keep this a se
cret from Hubby as he will go ballistic!! LOL
WoKoschekk said:
https://forum.xda-developers.com/g6-plus/how-to/firmware-moto-g6-g6plus-t3789274
Click to expand...
Click to collapse
Thank you, thankyou, it worked, now I have to try and get rid of the warning message about the bootloader being unlocked, You are an absolute star !!!
Barb28n said:
Thank you, thankyou, it worked, now I have to try and get rid of the warning message about the bootloader being unlocked, You are an absolute star !!!
Click to expand...
Click to collapse
Download and extract the logo.zip attachment. It contains a logo.bin file. Copy logo.bin to /sdcard (internal storage), open terminal app and type:
Code:
su
dd if=/sdcard/logo.bin of=/dev/block/by-name/logo`getprop ro.boot.slot_suffix`
Reboot and enjoy your new logo!
On the top left corner you'll see the 'Verity mode is set to disabled' message which is quiet normal.
I am having the same exact problem as the OP (except I haven't done anything to my phone lately, it just ran out of battery, shut down, and went into endless bootloop after I charged it up).
I tried following the above instructions (my software channel is RETLA) and found two "latest" versions as of this posting (and both zip files were found identical by the diff command, as were their contents after I unzipped them)-- XT1926-6_EVERT_RETLA_SS_9.0_PPWS29.116-11-13_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip and XT1926-7_EVERT_RETLA_DS_9.0_PPWS29.116-11-13_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip.
I tried flashing the XT1926-7 one and my phone is still in a boot loop. Since the other file is identical, I'm not expecting it to work either. So, which version of these firmwares is the correct one to use?
I thought that the point was that all these would work with a G6plus in the RETLA channel and some were just newer than others.
Thanks.
---------- Post added at 07:00 AM ---------- Previous post was at 06:07 AM ----------
I tried an earlier one, XT1926-7_EVERT_RETLA_DS_9.0_PPWS29.116-11-8_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip and got...
Can't load Android system. Your data may be corrupt. If you continue to get this message, you may need to perform a factory data reset and erase all user data stored on this device.
Click to expand...
Click to collapse
I went back to the earliest available 9.0 firmware, XT1926-7_EVERT_RETLA_9.0_PPW29.116-11_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip, flashed that, and still the above message.
Can anybody help?
Thanks.
---------- Post added at 07:03 AM ---------- Previous post was at 07:00 AM ----------
I do have TWRP installed on my SD card. Can that be used to unbrick the phone?
---------- Post added at 07:20 AM ---------- Previous post was at 07:03 AM ----------
...and wiping the cache from TWRP didn't fix it either -- still the same message about data being corrupt. Now I'm truly out of ideas.
Boot into fastboot mode to see which FW is the correct one for you.
Barb28n said:
Hi, I have looked for this problem, but cannot find any answers. I tried to flash a copy of the official rom on my phone, The bootloader is unlocked but not rooted. It seemed to go well, but now is on a permante startup loop.
I can get into fastboot and recovery, is there any way I can recover from this?
in fastboot it says baseband not found.
Any help will be really appreciated
Click to expand...
Click to collapse
Well, i read this post and answers till the end, as it describes very well my problem, but no such solution, so if someone could help would be great !
The device is Moto G6 plus XT1926-8 and i still have all acess to fastboot, and recovery by pressing keys, i've already flashed this roms:
XT1926-8_EVERT_RETBR_9.0_PPWS29.116-16-18_subsidy-DEFAULT_regulatory-DEFAULT_CFC
XT1926-8_EVERT_RETBR_9.0_PPWS29.116-16-15_subsidy-DEFAULT_regulatory-DEFAULT_CFC
stockrom.net_XT1926-8_EVERT_RETBR_9.0_PPWS29.116-16-11_subsidy-DEFAULT_regulatory-DEFAULT_CFC
in this order, but always got an infinite bootloop that sometime comes to inicial screens where you can click "start" set wifi, etc, but the device always restart no matter i click into it, or wait till a suposed "end" of restart rotine, that never came, always come to a restart showing my unlocked bootloader screen etc etc. I could suggest now try flashing a android 8 version rom, but for my experience, i have fear (not knowledge) that could something go wrong with radios and i finish not getting signal, so i came here looking for some help, if anyone knows something please help ! i will monitor this page so i can get any answer ! Thanks in advance !
ASPViTo said:
if anyone knows something please help ! i will monitor this page so i can get any answer ! Thanks in advance !
Click to expand...
Click to collapse
I've got some questions:
- did you flash Magisk or other tools like a "disable-dm_verity.zip"?
- userdata erased?
- correct boot slot?
Boot into recovery and try to "wipe (user)data". Maybe this will fix the bootloop.
Barb28n said:
Hi, I have looked for this problem, but cannot find any answers. I tried to flash a copy of the official rom on my phone, The bootloader is unlocked but not rooted. It seemed to go well, but now is on a permante startup loop.
I can get into fastboot and recovery, is there any way I can recover from this?
in fastboot it says baseband not found.
Any help will be really appreciated
Click to expand...
Click to collapse
WoKoschekk said:
I've got some questions:
- did you flash Magisk or other tools like a "disable-dm_verity.zip"?
- userdata erased?
- correct boot slot?
Boot into recovery and try to "wipe (user)data". Maybe this will fix the bootloop.
Click to expand...
Click to collapse
Hi bro, and thanks for the attention !
Answers: No, never used magisk. No other tools for root, if is this your question ! Only tool i have used is "Moto Auto Flash Tool v8.2 By Jamesjerss" that i used to unlock bootloader. All other flash process was done was using that list of commands everyone knows:
mfastboot getvar max-sparse-size
mfastboot oem fb_mode_set
mfastboot flash partition gpt.bin
mfastboot flash bootloader bootloader.img
mfastboot flash modem NON-HLOS.bin
mfastboot flash fsg fsg.mbn
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash bluetooth BTFM.bin
mfastboot flash dsp dspso.bin
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash system_b system_other.img
mfastboot flash oem oem.img
mfastboot flash oem_b oem_other.img
mfastboot flash vendor vendor.img_sparsechunk.0
mfastboot flash vendor vendor.img_sparsechunk.1
mfastboot flash vendor vendor.img_sparsechunk.3
mfastboot flash vendor vendor.img_sparsechunk.4
mfastboot erase carrier
mfastboot erase userdata
mfastboot erase DDR
mfastboot oem fb_mode_clear
mfastboot reboot
About that command "mfastboot erase userdata" you mention,
I found that this command is always used in the list above "user data erased" was used on all tryes of flashsing!
- correct boot slot?
I dont know what you mean about, maybe something like "fix" boot slot, if so, no, i dont know how to do it, if you can provide a link for me to read about, i thank you, if there was a chance of the device stop this infinites restarts.
Boot into recovery and wipe all data, i did every flash attempt, that had fail, as way to recover the device, no sucess so far, phone stills rebooting to unlocked bootloader screen that goes to motorola logo, that goes to briefly entrance of welcome screen, or nor this, restart reboot again, i observed that after various tries it hangs alone and stills a black screen, that only goes out if i long press power button looking a forced shut off, but it doenst stays turned of, this restart process, restart again. Any clues or ideas ?
ASPViTo said:
mfastboot flash vendor vendor.img_sparsechunk.0
mfastboot flash vendor vendor.img_sparsechunk.1
mfastboot flash vendor vendor.img_sparsechunk.3
mfastboot flash vendor vendor.img_sparsechunk.4
Click to expand...
Click to collapse
Did you use exactly the same commands? Apart from the fact that you should count 0,1,2,3 and 4 your firmware has only two vendor.img sparse files.
WoKoschekk said:
Did you use exactly the same commands? Apart from the fact that you count 0,1,2,3 and 4 your firmware has only two vendor.img sparse files.
Click to expand...
Click to collapse
mfastboot getvar max-sparse-size
mfastboot oem fb_mode_set
mfastboot flash partition gpt.bin
mfastboot flash bootloader bootloader.img
mfastboot flash modem NON-HLOS.bin
mfastboot flash fsg fsg.mbn
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash bluetooth BTFM.bin
mfastboot flash dsp dspso.bin
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash system system.img_sparsechunk.5
mfastboot flash system system.img_sparsechunk.6
mfastboot flash system system.img_sparsechunk.7
mfastboot flash system system.img_sparsechunk.8
mfastboot flash system system.img_sparsechunk.9
mfastboot flash system system.img_sparsechunk.10
mfastboot flash system system.img_sparsechunk.11
mfastboot flash system system.img_sparsechunk.12
mfastboot flash system_b system_other.img
mfastboot flash oem oem.img
mfastboot flash oem_b oem_other.img
mfastboot flash vendor vendor.img_sparsechunk.0
mfastboot flash vendor vendor.img_sparsechunk.1
mfastboot flash vendor vendor.img_sparsechunk.3
mfastboot flash vendor vendor.img_sparsechunk.4
mfastboot flash vendor vendor.img_sparsechunk.5
mfastboot flash vendor vendor.img_sparsechunk.6
mfastboot flash vendor vendor.img_sparsechunk.7
mfastboot flash vendor vendor.img_sparsechunk.8
mfastboot flash vendor vendor.img_sparsechunk.9
mfastboot flash vendor vendor.img_sparsechunk.10
mfastboot flash vendor vendor.img_sparsechunk.11
mfastboot flash vendor vendor.img_sparsechunk.12
mfastboot erase carrier
mfastboot erase userdata
mfastboot erase DDR
mfastboot oem fb_mode_clear
mfastboot reboot
used this one, something that can improved ?
ASPViTo said:
used this one, something that can improved ?
Click to expand...
Click to collapse
yes, don't use it!
Where did you get the firmware from?
---------- Post added at 11:00 PM ---------- Previous post was at 10:44 PM ----------
Every single command applies to the corresponding file within the firmware.zip. The first command list you posted is the correct one but those two lines vendor.img...3+4 are useless because the files don't exist and cannot be flashed. Delete them and try again.