Related
Hey!
I have a Bell SGH-I337M. First off, my big mistake is I forgot to backup my stock firmware. I would like to return my phone to Stock so I can back it up but I can not.
I originally installed CM10.1 nightly as directed on cyanogenmod.org
Wasn't happy with the nightly, and decided to install Google Play Edition ROM. I like the way it works, except I can not Root or see my phone in ODIN when its in download mode.
So far from what I've read is I can only flash the stock firmware back through ODIN.
When I try to root it with motochopper it always comes up failed.
The version of Google Play Edition Rom is for the GT-I9505G but thats the one that Galaxy4root.com said to use for the Canadian version. I'm thinking this might be the issue for not being able to see the phone in ODIN or be able to root.
*I can see the phone in ODIN when my phone is booted up as normal*
*I had root when I had CM10.1, but its gone now that I have Google Play Edition*
Also, I downloaded I337M/I337MVLUAMDJ_I337MOYAAMDJ_BMC.zip and when I try to use CWM to Install from .ZIP it says:
Can't open /external_sd/I337M/I337MVLUAMDJ_I337MOYAAMDJ_BMC.zip (bad)
I've tried downloading this stock firmware from multiple sites and always get the same message.
Please any help would be greatly appreciated!
Thanks!
Bender
Use chainfire's cf-auto root method.
Sounds silly, but try a different usb plug and or input spot. That was my problem once.
Sent from my SGH-I337 using XDA Premium 4 mobile app
xBeerdroiDx said:
Use chainfire's cf-auto root method.
Click to expand...
Click to collapse
According to this thread: [SGH-I337M] CF-Auto-Root [CANADIAN MODELS ONLY]
It states:
"Check your device model ! Settings -> About device -> Model number. See the third post for exact supported model numbers. If your device is a totally different model, it will not work (may even brick) !"
Since my device is now showing as the GT-I9505G, I'm worried this may brick my phone.
douggiephresh said:
Sounds silly, but try a different usb plug and or input spot. That was my problem once.
Sent from my SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hi,
Thank you, but I have tried this as well as using my wifes cable from her galaxy s3
benderf1 said:
Hi,
Thank you, but I have tried this as well as using my wifes cable from her galaxy s3
Click to expand...
Click to collapse
First, try what beerdroid suggested.
Second, the stock firmware zip you downloaded is only usable in kies. You cannot use it in your recovery.
jd1639 said:
First, try what beerdroid suggested.
Second, the stock firmware zip you downloaded is only usable in kies. You cannot use it in your recovery.
Click to expand...
Click to collapse
Ok, thanks I will try this.........but can I use CF-AUTO Root with out using ODIN because like I said, when my phone is in download mode there is nothing in the com window in ODIN
jd1639 said:
First, try what beerdroid suggested.
Second, the stock firmware zip you downloaded is only usable in kies. You cannot use it in your recovery.
Click to expand...
Click to collapse
jd1639 !! you mentioned Kies and it lit a light bulb in my head..............since I was running the Google Play Edition I9505 version, I realized that the samsung drivers that were installed on my computer were still for the SGH-I337M. I uninstalled Kies and reinstalled, and it installed the I9505 drivers. I was then able to see my phone in ODIN mode!!!
I have been working at this for a month now off and on, and I just couldn't figure it out.........Thanks so much for your help!
Stock firmware is back on my phone!
benderf1 said:
jd1639 !! you mentioned Kies and it lit a light bulb in my head..............since I was running the Google Play Edition I9505 version, I realized that the samsung drivers that were installed on my computer were still for the SGH-I337M. I uninstalled Kies and reinstalled, and it installed the I9505 drivers. I was then able to see my phone in ODIN mode!!!
I have been working at this for a month now off and on, and I just couldn't figure it out.........Thanks so much for your help!
Stock firmware is back on my phone!
Click to expand...
Click to collapse
Glad to hear it helped. Good luck to you!
Hello. I have been searching for hours like a mad man on Google for a solution to my problem, but i'm having no luck. Excuse the nooby nature of this post please. So I rooted my Galaxy S4 and I am trying to get it back to stock by flashing the AT&T md5 onto my phone (Galaxy S4 SGH-I337) through ODIN and it fails every single time. Initially, with ODIN 3.07, it would return something like fail (auth). Then I tried with ODIN 1.85, but that version returns "Complete(Write) operation failed." In addition, I attempted Kies but it too failed (no specific error code), and now the phone wont boot. It says that the firmware upgrade encountered an issue. I am not able to access stock recovery or TWRP because it will automatically go to Download Mode with "Could not do normal boot" in the top left corner if I in any way attempt to access it. I am using the stock cable with USB Debugging enabled. I also tried two different computers, two different cables (one being stock of course), and tried every single usb port on both computers. What went wrong? I will give you my upmost respect if you can solve this. I also am absolutely willing to supply any information you may need. Just ask. (Please don't be bricked. Please don't be bricked)
-With kind regards, Branden.
Let me guess you had the att mf3 firmware and tried retoring by flashing the MDL firmware via odin? You said md5 so I assume mdl? You might at this point still be able to fix it visiting a best buy near you if it has a samsung center. Also att store can reflash mf3.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
Click Here throw this thread in the MF3 pile... guys we got another noob here, take a trip to your closest best buy and hope the samsung experience will flash the mf3 update for u
You mention md5, which as febby assumed I'll assume to be mdl, and twrp. Do you have mdl firmware on your phone and did you have twrp installed. Assuming you had twrp you were probably on mdl firmware. If so, I would re-download the firmware and try again. It would help if you could explain where Odin is failing too.
jd1639 said:
You mention md5, which as febby assumed I'll assume to be mdl, and twrp. Do you have mdl firmware on your phone and did you have twrp installed. Assuming you had twrp you were probably on mdl firmware. If so, I would re-download the firmware and try again. It would help if you could explain where Odin is failing too.
Click to expand...
Click to collapse
I never actually got TWRP working. I flashed it through Goo Manger and I was never able access it (It went to download mode with "Could not do normal boot" in the corner). Does this change the type of firmware I was on? In both cases of ODIN, the newer version (3.07) fails immediately after you start the process at around NAND Write start. It returns Fail (auth). In the older version (1.8.5), it reports that the write operation failed. I attached screenshots of both cases.
If you never got twrp to work then I'm almost positive you have mf3 firmware. You're best bet is best buy and have them re-flash the firmware.
Astrophysicist789 said:
I never actually got TWRP working. I flashed it through Goo Manger and I was never able access it (It went to download mode with "Could not do normal boot" in the corner). Does this change the type of firmware I was on? In both cases of ODIN, the newer version (3.07) fails immediately after you start the process at around NAND Write start. It returns Fail (auth). In the older version (1.8.5), it reports that the write operation failed. I attached screenshots of both cases.
Click to expand...
Click to collapse
There is no way to fix your problem currently so like jd1639 said, take it to best buy to the Samsung Experience area and tell them Samsung Kies firmware update fail and it did this to your phone. Thats what I did yesterday, they flashed it and I have my phone working again.
gandes said:
There is no way to fix your problem currently so like jd1639 said, take it to best buy to the Samsung Experience area and tell them Samsung Kies firmware update fail and it did this to your phone. Thats what I did yesterday, they flashed it and I have my phone working again.
Click to expand...
Click to collapse
Okay. I thank everybody for their assistance. You are very helpful people. I will head down to best buy and see what they can do for me.
Astrophysicist789 said:
Okay. I thank everybody for their assistance. You are very helpful people. I will head down to best buy and see what they can do for me.
Click to expand...
Click to collapse
Your welcome
And just so everyone knows...md5 is part of the package name I believe... (.tar.md5) or could be referring to md5 checksum...anyways as was mentioned and you acknowledged, best buy is your best bet
Sent from my SGH-I337 using Tapatalk 4
Hey guys I used oden to flash back to stock amdl and then a att update keep trying ro come threw durring the night I noticed.it downloadwd went into recovery and was on flash update I hit no instead and rebooted now I noticed my baseband changed to amdb . update is back again and I now hit remind me later is this the update witch will lockbootloader
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
ralphie1267 said:
Hey guys I used oden to flash back to stock amdl and then a att update keep trying ro come threw durring the night I noticed.it downloadwd went into recovery and was on flash update I hit no instead and rebooted now I noticed my baseband changed to amdb . update is back again and I now hit remind me later is this the update witch will lockbootloader
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Yeah it is the dreaded one! Root your device and flash a custom ROM or use titanium backup to freeze the update apps.
Sent from my SGH-I337 using Tapatalk 2
Hello,
Problem:
I own a Samsung Galaxy S4 I337 model from AT&T with a locked bootloader. While using safestrap I accidentally checked the /system folder while wiping the STOCK ROM. I didn't yet have another working ROM loaded onto the phone (Safestrap allows you to boot from multiple different ROMS). My phone now freezes at the Samsung logo when I try to boot normally, and I can't reflash the stock ROM in download mode as the bootloader is still locked (I can, however, boot into download mode).
My phone is recognized by ADB which (theoretically) means I can push files back to the device. I haven't yet tried although I'm afraid it may not work as only 2/3 drivers successfully install on my computer when I plug the phone in.
My request from the great tech gods at XDA Forums:
1) If anyone can please reply with any ideas/solutions to my problem I would greatly appreciate it. (PLEASE, ANYTHING. I'M DESPERATE!)
2) If anyone could supply me with a download for the Galaxy s4 I337 /system folder I could attempt to use ADB to push it onto the phone and reboot. WARNING: I'm not an expert on Android and know nothing about the /system folder. Using the /system folder from your personal phone could supply me with very personal information about you/your phone. Please only do this if you know what you're doing!
My ideas:
1) Use android ADB to push the missing files back to my phone, although I don't know if I deleted the entire /system folder or just select things inside it. Also I can't find any downloads for a /system folder anywhere on the Internet.
2) Take it back to AT&T and play dumb. Hopefully they can at least temporarily unlock the bootloader to reflash the stock ROM for me.
Any ideas are GREATLY appreciated,
JT
PS: If you need any more information please leave a reply and I will update the post ASAP. :good:
EDIT: I am running 4.3 Jellybean. Also in answer to your response, I can't flash the firmware again as the bootloader is locked. (Unless I'm missing something and you know more than me, I'm no expert.)
EDIT 2: Looks like I may be wrong and you can reflash the stock ROM on my locked bootloader. Also, for future responses, my S4 has the MF3 baseband although I'll try the thread you suggested. (With the files for my device of course)
EDIT 3: Having trouble flashing stock firmware again with ODIN even though I've now been told that it's possible, read below for more details. I think it's due to the PIT file or the fact that I was running 4.3 and I believe I am trying to flash back to 4.2.2. Please help!
SOLVED: Thanks to ted77usa, I flashed the MK2 stock ROM to my phone through ODIN and this time everything went without a hitch. THANKS A TON!
Also if any mods want to move/delete/do whatever with this post feel free to do so, I don't see this post being very useful for educational purposes as my logic on locked bootloaders was wrong and I don't want people getting the wrong idea.
What firmware are you on? I'd Odin flash the tar files for that firmware.
JTrocks said:
Hello,
Problem:
I own a Samsung Galaxy S4 I337 model from AT&T with a locked bootloader. While using safestrap I accidentally checked the /system folder while wiping the STOCK ROM. I didn't yet have another working ROM loaded onto the phone (Safestrap allows you to boot from multiple different ROMS). My phone now freezes at the Samsung logo when I try to boot normally, and I can't reflash the stock ROM in download mode as the bootloader is still locked (I can, however, boot into download mode).
My phone is recognized by ADB which (theoretically) means I can push files back to the device. I haven't yet tried although I'm afraid it may not work as only 2/3 drivers successfully install on my computer when I plug the phone in.
My request from the great tech gods at XDA Forums:
1) If anyone can please reply with any ideas/solutions to my problem I would greatly appreciate it. (PLEASE, ANYTHING. I'M DESPERATE!)
2) If anyone could supply me with a download for the Galaxy s4 I337 /system folder I could attempt to use ADB to push it onto the phone and reboot. WARNING: I'm not an expert on Android and know nothing about the /system folder. Using the /system folder from your personal phone could supply me with very personal information about you/your phone. Please only do this if you know what you're doing!
My ideas:
1) Use android ADB to push the missing files back to my phone, although I don't know if I deleted the entire /system folder or just select things inside it. Also I can't find any downloads for a /system folder anywhere on the Internet.
2) Take it back to AT&T and play dumb. Hopefully they can at least temporarily unlock the bootloader to reflash the stock ROM for me.
Any ideas are GREATLY appreciated,
JT
PS: If you need any more information please leave a reply and I will update the post ASAP. :good:
EDIT: I am running 4.3 Jellybean. Also in answer to your response, I can't flash the firmware again as the bootloader is locked. (Unless I'm missing something and you know more than me, I'm no expert.)
Click to expand...
Click to collapse
You can use ODIN just fine on the locked bootloaders. Follow the directions in the MK2 TARs thread in the general section.
RE: ODIN on locked bootloader
DeadlySin9 said:
You can use ODIN just fine on the locked bootloaders. Follow the directions in the MK2 TARs thread in the general section.
Click to expand...
Click to collapse
My phone has the MF3 baseband although I'll try the thread you suggested. (With the files for my device of course) Thanks!
Firmware Number
jd1639 said:
What firmware are you on? I'd Odin flash the tar files for that firmware.
Click to expand...
Click to collapse
I'm on 4.3 Jellybean although I don't believe I can reflash the firmware because of my locked bootloader.
EDIT: According to the above post, I can reflash it. Can someone please clarify what files I will need to do so?
JTrocks said:
I'm on 4.3 Jellybean although I don't believe I can reflash the firmware because of my locked bootloader.
EDIT: According to the above post, I can reflash it. Can someone please clarify what files I will need to do so?
Click to expand...
Click to collapse
You need the mf3 tar files. Have you found then?
Flashing tar files with ODIN
jd1639 said:
You need the mf3 tar files. Have you found then?
Click to expand...
Click to collapse
I'm downloading them now from here. Can you verify for me that this is up to date/correct? I previously tried to flash the .tar.md5 file for my phone although I got a "write error" and after researching it I found that you can't flash files in download mode with a locked bootloader. Apparently this is wrong though, thanks for the all the help so far!
JTrocks said:
I'm downloading them now from here. Can you verify for me that this is up to date/correct? I previously tried to flash the .tar.md5 file for my phone although I got a "write error" and after researching it I found that you can't flash files in download mode with a locked bootloader. Apparently this is wrong though, thanks for the all the help so far!
Click to expand...
Click to collapse
Yep, those are the ones. Read the thread on how to use them
Flashing with ODIN
jd1639 said:
Yep, those are the ones. Read the thread on how to use them
Click to expand...
Click to collapse
I followed the thread exactly as it said but it failed. Then I included the the PIT file but still failed. I've attached a screenshot of ODIN after I tried with the PIT file.
EDIT: My phone is giving a message that reads: "SECURE CHECK FAIL : PIT" I read that PIT files have to be signed with a device-specific key to work, although it seems that most people aren't having a problem using one found off of the Internet. Any ideas?
EDIT 2: I believe those files are for 4.2.2, I was running 4.3, is this the issue? Also I don't know if my phone was updated OTA or not, I bought it from eBay. :/
JTrocks said:
I followed the thread exactly as it said but it failed. Then I included the the PIT file but still failed. I've attached a screenshot of ODIN after I tried with the PIT file.
EDIT: My phone is giving a message that reads: "SECURE CHECK FAIL : PIT" I read that PIT files have to be signed with a device-specific key to work, although it seems that most people aren't having a problem using one found off of the Internet. Any ideas?
EDIT 2: I believe those files are for 4.2.2, I was running 4.3, is this the issue? Also I don't know if my phone was updated OTA or not, I bought it from eBay. :/
Click to expand...
Click to collapse
@JTrocks ....If u are on 4.3 rom it mean that either u took OTA to MK2 firmware and then someone either u or the seller from ebay flash the modem back to MF3 to complete SIM UNLOCKED( if u ever sim unlocked ) .........either way just follow my thread..........
| ★ MK2 ★ FULL ODIN TAR FILES ★ MK2 ★ | ★ UNBRICKED ★ Jan.31.2014 ★ | u can restore to stock 4.3 MK2 firmware or even update to MK2 if u coming from MF3.....tested my self and others confirmed as well....:good::good: Check post #2 for guide on how to ,......BUT IF U STILL WANT TO FLASH THAT MF3.TAR .....TRY TO UN-CHECK RE-PARTITION FROM ODIN ONLY AUTO REBOOT AND F.RESET TIME ARE CHECK.....U DONT HAVE TO LOAD THAT PIT FILE.....JUST BOOTLOADER,PDA,MODEM AND CSC IS ENOUGH....ALSO TRY DIFFERENT ODIN VERSION FROM MY THREAD POST#2 THERE IS ODIN3 V1.85 ....GOODLUCK.....LET ME KNOW HOW IT GO....:good::good:
ted77USA
ted77usa said:
@JTrocks ....If u are on 4.3 rom it mean that either u took OTA to MK2 firmware and then someone either u or the seller from ebay flash the modem back to MF3 to complete SIM UNLOCKED( if u ever sim unlocked ) .........either way just follow my thread..........
| ★ MK2 ★ FULL ODIN TAR FILES ★ MK2 ★ | ★ UNBRICKED ★ Jan.31.2014 ★ | u can restore to stock 4.3 MK2 firmware or even update to MK2 if u coming from MF3.....tested my self and others confirmed as well....:good::good: Check post #2 for guide on how to ,......BUT IF U STILL WANT TO FLASH THAT MF3.TAR .....TRY TO UN-CHECK RE-PARTITION FROM ODIN ONLY AUTO REBOOT AND F.RESET TIME ARE CHECK.....U DONT HAVE TO LOAD THAT PIT FILE.....JUST BOOTLOADER,PDA,MODEM AND CSC IS ENOUGH....ALSO TRY DIFFERENT ODIN VERSION FROM MY THREAD POST#2 THERE IS ODIN3 V1.85 ....GOODLUCK.....LET ME KNOW HOW IT GO....:good::good:
Click to expand...
Click to collapse
Thanks for the reply, but before I go any further I should clarify some information about my phone. I bought an AT&T Samsung Galaxy S4 from eBay, when I got the phone it was running 4.3. The catch: My phone isn't actually on AT&T service OR SIM unlocked (I think), I'm with a cell provider called NET 10. How NET 10 works is that it pays AT&T to run off of their service, NET 10 is cheaper for the customers because it isn't as fast as AT&T. AT&T and Net 10 have an agreement where you can take any phone from AT&T and hook it up to NET 10 without unlocking it. Although I think that NET 10 may unlock your phone when you hook it up to their service, I'm not sure. What makes my think that is that when I booted my phone up after transferring to NET 10, a picture of an open padlock appeared under the Samsung logo.
Being on NET 10 may have changed some of that, specifically the MF3/MK2 baseband. Not being an expert on basebands and how they correlate to your cell service provider, will following your instructions result in not being able to connect to NET 10's service? It's probably a stupid question, I know, but with my minimal knowledge I figured I should ask before I followed through with anything.
JTrocks said:
Thanks for the reply, but before I go any further I should clarify some information about my phone. I bought an AT&T Samsung Galaxy S4 from eBay, when I got the phone it was running 4.3. The catch: My phone isn't actually on AT&T service OR SIM unlocked (I think), I'm with a cell provider called NET 10. How NET 10 works is that it pays AT&T to run off of their service, NET 10 is cheaper for the customers because it isn't as fast as AT&T. AT&T and Net 10 have an agreement where you can take any phone from AT&T and hook it up to NET 10 without unlocking it. Although I think that NET 10 may unlock your phone when you hook it up to their service, I'm not sure. What makes my think that is that when I booted my phone up after transferring to NET 10, a picture of an open padlock appeared under the Samsung logo.
Being on NET 10 may have changed some of that, specifically the MF3/MK2 baseband. Not being an expert on basebands and how they correlate to your cell service provider, will following your instructions result in not being able to connect to NET 10's service? It's probably a stupid question, I know, but with my minimal knowledge I figured I should ask before I followed through with anything.
Click to expand...
Click to collapse
It shouldn't. Your phone is the same model, and the firmware appears to be the same. At most you might have to put in an APN to get your mobile data back.
Continuing with Instructions
DeadlySin9 said:
It shouldn't. Your phone is the same model, and the firmware appears to be the same. At most you might have to put in an APN to get your mobile data back.
Click to expand...
Click to collapse
Thanks, I'm aware of the APN. I had SEVERAL issues with NET 10 when I first set that up. (THEY MISSPELLED THE F****** IP ADDRESS ON THEIR WEBSITE!) Still frustrated about that one. D:<
I'm now preparing to follow through with ted77usa's instructions. Sorry if I respond slow, I have to wait 5 minutes after each post/edit as I haven't been approved by a mod yet.
EDIT: I may have to continue this tomorrow, the site ted77usa used to host the .tar files is pretty slow. The download is going to take an hour and it's getting late here. I can't believe how much support I'm getting from everyone, thanks a TON! I'm clicking the thanks button on everyone who's helped me, it's the least I can do!
JTrocks said:
Thanks, I'm aware of the APN. I had SEVERAL issues with NET 10 when I first set that up. (THEY MISSPELLED THE F****** IP ADDRESS ON THEIR WEBSITE!) Still frustrated about that one. D:<
I'm now preparing to follow through with ted77usa's instructions. Sorry if I respond slow, I have to wait 5 minutes after each post/edit as I haven't been approved by a mod yet.
EDIT: I may have to continue this tomorrow, the site ted77usa used to host the .tar files is pretty slow. The download is going to take an hour and it's getting late here. I can't believe how much support I'm getting from everyone, thanks a TON! I'm clicking the thanks button on everyone who's helped me, it's the least I can do!
Click to expand...
Click to collapse
While u waiting. ... try to read all the thread so that would give u an idea what others issue incase u run same problem..... As long as u check md5 if they match then u should good to go. ... and seem to me u know usb debugging. ...all the driver already installed....PM me if u need more help ....:thumbup::thumbup:
Swyped From MK2 Dark Venom SS Edition
All Good!
ted77usa said:
While u waiting. ... try to read all the thread so that would give u an idea what others issue incase u run same problem..... As long as u check md5 if they match then u should good to go. ... and seem to me u know usb debugging. ...all the driver already installed....PM me if u need more help ....:thumbup::thumbup:
Swyped From MK2 Dark Venom SS Edition
Click to expand...
Click to collapse
AMAZING! Everything went without a hitch!! My phone now indicates that it is running Android 4.3, Baseband version MK2, and calls/texts are working just fine. I have to enter my APN settings again as DeadlySin9 mentioned, but I expect everything should work fine. Thanks to everyone who helped me out (especially ted77usa with the link to his thread), if there's anything I can do to help any of you out in return just let me know! THANKS A TON!!!
JTrocks said:
AMAZING! Everything went without a hitch!! My phone now indicates that it is running Android 4.3, Baseband version MK2, and calls/texts are working just fine. I have to enter my APN settings again as DeadlySin9 mentioned, but I expect everything should work fine. Thanks to everyone who helped me out (especially ted77usa with the link to his thread), if there's anything I can do to help any of you out in return just let me know! THANKS A TON!!!
Click to expand...
Click to collapse
Glad that u got your phone back..... and u also got great community in here...... the best place to learn and give back .....:thumbup::thumbup:
Swyped From MK2 Dark Venom SS Edition
atnt splash screen
JTrocks said:
AMAZING! Everything went without a hitch!! My phone now indicates that it is running Android 4.3, Baseband version MK2, and calls/texts are working just fine. I have to enter my APN settings again as DeadlySin9 mentioned, but I expect everything should work fine. Thanks to everyone who helped me out (especially ted77usa with the link to his thread), if there's anything I can do to help any of you out in return just let me know! THANKS A TON!!!
Click to expand...
Click to collapse
Hey, i had a similar problem. MK2 safe root method. became rooted and everything was great. downloaded xposed framwork/installer. selected fast boot option by accident been stopping at the atnt splash screen ever since. i am able to boot into download/odin mode as well as recovery. I have tried mutiple wipes and facotry resets but same outcome, hangs at atnt screen. i creeped around the threads and found this. My first question is did Ted77usa files from his link take forever for you also? and second how many attmepts did it take with odin?
semarj said:
Hey, i had a similar problem. MK2 safe root method. became rooted and everything was great. downloaded xposed framwork/installer. selected fast boot option by accident been stopping at the atnt splash screen ever since. i am able to boot into download/odin mode as well as recovery. I have tried mutiple wipes and facotry resets but same outcome, hangs at atnt screen. i creeped around the threads and found this. My first question is did Ted77usa files from his link take forever for you also? and second how many attmepts did it take with odin?
Click to expand...
Click to collapse
@semarj If you follow my thread and guide on post#2 it should get u back on stock MK2 less then 6 minutes. .... As long as u have usb debugging check. ... Good usb cable. ....Good driver installed and make sure ONLY auto reboot and F. Reset Time CHECK from Odin..... GOODLUCK. ....PM ME IF YOU NEED MORE HELP. ....:thumbup::thumbup:
Swyped From MK2 Dark Venom SS Edition
semarj said:
Hey, i had a similar problem. MK2 safe root method. became rooted and everything was great. downloaded xposed framwork/installer. selected fast boot option by accident been stopping at the atnt splash screen ever since. i am able to boot into download/odin mode as well as recovery. I have tried mutiple wipes and facotry resets but same outcome, hangs at atnt screen. i creeped around the threads and found this. My first question is did Ted77usa files from his link take forever for you also? and second how many attmepts did it take with odin?
Click to expand...
Click to collapse
It took about an hour for me to download ted77usa's files but I have relatively fast internet (16 mb/ps). As soon as the files downloaded it worked first try, are you in download mode? If you are and it's still not working you may need the PIT file and to make sure that re-partition is checked along with the 2 others that ted77usa mentioned.
drivers finished
ted77usa said:
@semarj If you follow my thread and guide on post#2 it should get u back on stock MK2 less then 6 minutes. .... As long as u have usb debugging check. ... Good usb cable. ....Good driver installed and make sure ONLY auto reboot and F. Reset Time CHECK from Odin..... GOODLUCK. ....PM ME IF YOU NEED MORE HELP. ....:thumbup::thumbup:
Swyped From MK2 Dark Venom SS Edition
Click to expand...
Click to collapse
I will post back asap. the drivers were taking forever to download so i started a kias emergency firmware recovery. thats taking forever also. its only at 79% but have been running for an hour. should i let finish? and if unsuccessful try odin or just quit and do odin?
I cannot boot my phone whenever i do it says "System software not authorized by AT&T has been found on your phone." I have tried every solution for about 5 hours. I have tried the odin stock tar.md5 files i have the Galaxy s4 AT&T i337.
http://forum.xda-developers.com/showthread.php?t=2616221
This thread has the stock MK2 and NB1 firmware.
Sent from my SAMSUNG-SGH-I337 using Tapatalk
lookin4tna said:
I cannot boot my phone whenever i do it says "System software not authorized by AT&T has been found on your phone." I have tried every solution for about 5 hours. I have tried the odin stock tar.md5 files i have the Galaxy s4 AT&T i337.
Click to expand...
Click to collapse
Try a different kernel, that message appears when you flash the wrong kernel....good luck!
lookin4tna said:
I cannot boot my phone whenever i do it says "System software not authorized by AT&T has been found on your phone." I have tried every solution for about 5 hours. I have tried the odin stock tar.md5 files i have the Galaxy s4 AT&T i337.
Click to expand...
Click to collapse
If you were on MDL, you need to use Loki. Try a different kernel too and if not you probably need a different firmware.
Sent from my SGH-I337 running Blackbox 3.0
One last thing
This is how it happened:
1: App store didnt work
2: Restored to factory settings from my settings section
3: Still didnt work
4: Another restore from boot menu
5: Looked how to unroot then installed a new PDA and BootLoader from ODIN
6: Phone locked and gives the error
lookin4tna said:
This is how it happened:
1: App store didnt work
2: Restored to factory settings from my settings section
3: Still didnt work
4: Another restore from boot menu
5: Looked how to unroot then installed a new PDA and BootLoader from ODIN
6: Phone locked and gives the error
Click to expand...
Click to collapse
A while back I had something similar happen to myself as well. The only way I was able to revive my phone was by performing an emergency firmware upgrade via Kies. This will bring you back to your original stock firmware so you will have to re-root your phone.
Hope this helps
I cannot boot my;phone reboot &open , it says "System software not authorized by AT&T has been found on your phone." I have tried every solution for about 5 hours. I have tried the odin stock tar.md5 files i have the Galaxy s4 AT&T i337.
If you were on MDL and installed a new bootloader, then say goodbye to custom ROMs like CyanoGen Mod and AOSP.
This may help with restoring the rom: https://forum.xda-developers.com/galaxy-s4-att/general/guide-odin-to-stock-updating-rooting-t2926642
Hi, I started a thread needing help with my wifi but it has developed into not even being able to boot at all; it stops at the galaxy logo and either freezes or keeps booting. I have gone to the Odin page with all the different things to do and flashed the file to get back to the original rom but that is really where the trouble began. right now the only thing I can do with my phone is get into download mode, I can't even get into recovery. I have flashed a pit file that worked the first time but I don't know if that is part of the problem or not. Can someone please give me some directions, thanks
Also the phone won't boot at all unless hooked up to a power supply, the battery alone doesn't do anything.
nate39 said:
Hi, I started a thread needing help with my wifi but it has developed into not even being able to boot at all; it stops at the galaxy logo and either freezes or keeps booting. I have gone to the Odin page with all the different things to do and flashed the file to get back to the original rom but that is really where the trouble began. right now the only thing I can do with my phone is get into download mode, I can't even get into recovery. I have flashed a pit file that worked the first time but I don't know if that is part of the problem or not. Can someone please give me some directions, thanks
Click to expand...
Click to collapse
More info is needed. What firmware / bootloader are you on? Was it rooted? Did you have a custom recovery installed? What version of ODIN are you using?
StoneyJSG said:
More info is needed. Which GS3 do you have? What firmware / bootloader are you on? Was it rooted? Did you have a custom recovery installed? What version of ODIN are you using?
Right now, it sounds like you might need to use enewman17's ODIN debrick file.
Click to expand...
Click to collapse
It is the AT&T s4. To be honest I don't know what firmware I am on, it is the one the Odin page said to use if you want to go back to stock. I never rooted it. The bootloader would be whatever the latest update was for this phone. I can't get into it to tell you anymore. I am using ODIN 10, the latest one. thanks
Well I finally got into recovery and did a factory reset, now it boots into the AT&T white splash screen before it just turns off. I am also wondering if my battery just died for some reason?
nate39 said:
It is the AT&T s4. To be honest I don't know what firmware I am on, it is the one the Odin page said to use if you want to go back to stock. I never rooted it. The bootloader would be whatever the latest update was for this phone. I can't get into it to tell you anymore. I am using ODIN 10, the latest one. thanks
Click to expand...
Click to collapse
ODIN 10? Try using ODIN 3.09 and see if that helps. The latest update would be Android 4.4.4 NJ4 firmware. This link should help you, it will give you root with safe strap recovery though: http://forum.xda-developers.com/galaxy-s4-att/general/guide-odin-to-stock-updating-rooting-t2926642
I meant 3.10, I will try the older version. What file should I flash?
nate39 said:
I meant 3.10, I will try the older version. What file should I flash?
Click to expand...
Click to collapse
Check out the link I posted in my last post. It should help you get your phone fixed.
I have been there. I went to the very last option which seems to be what I need unless I am missing something.
Neither odin 3.09 or 3.10 will even flash any file now. it either says invalid md5 or fails when it attempts it.
Well, I finally got it to boot into android but it is flaky at best. It is android 4.3 instead of 4.4 where it was initially. The wifi still doesn't work and now the keyboard keeps crashing everytime I do something. The build is jss15j1337ucuemk2 which I know is older than I had before. Does this give anyone a better idea of what I need to do? If I can get a stable flash then can I flash a modem file to fix the wifi? I really need some direction, thanks
Turns out the battery was completely drained which was causing some of the boot problems, I don't now how that happened but I am charging it now.
Well after using odin 3.8* I got it to install some older firmware ending in mk2 rather than the nc1 or nf4 that I had before the trouble. After I got it to boot, I went back into download mode and flashed the modem file and now everything works execpt I had to force stop Samsung keyboard and use swype. I would like to upgrade my firmware but since for a couple of more weeks it won't have a sim card I can't upgrade OTA. For some reason Kies says that firmware upgrade and initialization isn't supported with this model which makes no sense to me. It also says my firmware is up to date
Does anyone know how to flash to the latest firmware without me going through this nightmare again? thanks
nate39 said:
Well after using odin 3.8* I got it to install some older firmware ending in mk2 rather than the nc1 or nf4 that I had before the trouble. After I got it to boot, I went back into download mode and flashed the modem file and now everything works execpt I had to force stop Samsung keyboard and use swype. I would like to upgrade my firmware but since for a couple of more weeks it won't have a sim card I can't upgrade OTA. For some reason Kies says that firmware upgrade and initialization isn't supported with this model which makes no sense to me. It also says my firmware is up to date
Does anyone know how to flash to the latest firmware without me going through this nightmare again? thanks
Click to expand...
Click to collapse
If I were in your shoes I'd flash the nb1 tar file in Odin, any vein should work. See this for the tar file http://forum.xda-developers.com/showthread.php?p=56453100. You can then ota to the latest firmware which is 4.4.4, nj4
Sent from my Nexus 9 using XDA Free mobile app
thanks, and as far as you know this doesn't mess wifi up?
nate39 said:
thanks, and as far as you know this doesn't mess wife up?
Click to expand...
Click to collapse
I assume you ment WiFi and not wife? Can't help you with the wife but Wi-Fi should work fine
Sent from my Nexus 9 using XDA Free mobile app
nate39 said:
Well after using odin 3.8* I got it to install some older firmware ending in mk2 rather than the nc1 or nf4 that I had before the trouble. After I got it to boot, I went back into download mode and flashed the modem file and now everything works execpt I had to force stop Samsung keyboard and use swype. I would like to upgrade my firmware but since for a couple of more weeks it won't have a sim card I can't upgrade OTA. For some reason Kies says that firmware upgrade and initialization isn't supported with this model which makes no sense to me. It also says my firmware is up to date
Does anyone know how to flash to the latest firmware without me going through this nightmare again? thanks
Click to expand...
Click to collapse
Download a firmaware for your region from sammobile and flash it via odin 3.10. It will solve most of your problems
Muthumbi said:
Download a firmaware for your region from sammobile and flash it via odin 3.10. It will solve most of your problems
Click to expand...
Click to collapse
Sammobile isn't going to have anything for the i337 unless you're on mdl
Sent from my Nexus 9 using XDA Free mobile app
jd1639 said:
Sammobile isn't going to have anything for the i337 unless you're on mdl
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
I agree. But google has basically all he needs. More so rapidgator
I haven't found anything from Samsung to download. If I flash a newer build, do I also need to flash a modem file and a bootloader or can I just flash the PDA? thanks for explaining this to me.
And can I do a dirty flash so I don't have to lose everything again?
well, now I see that there is no sound. so I guess I will have to flash again.
nate39 said:
well, now I see that there is no sound. so I guess I will have to flash again.
Click to expand...
Click to collapse
There's. Something I'm yet to understand. Did you finally manage to boot into recovery? If so, flash a custom recovery (I recommend philz touch recovery) then use it to make complete wipe.
Then boot into download mode and flash latest pda firmware in the compressed file you downloaded. Ps: make sure it's from your region.
May be if you provided me with your region I'd get you all the files required