I flashed The JasmineRom , in settings the kernal version says>>( 3.4.0 [email protected]) , I also have SS 3.75 installed and the app says safe strap system : not active , so now I have to go into the app in order to boot into recovery, how do I activate SS ? so that I can go boot into recovery in the shut down menu ? Also I tried to flash a rom in rom slot 2 and the flash failed what did I do wrong ? I thank you in advance for your help and advice.
wilspeak said:
I flashed The JasmineRom , in settings the kernal version says>>( 3.4.0 [email protected]) , I also have SS 3.75 installed and the app says safe strap system : not active , so now I have to go into the app in order to boot into recovery, how do I activate SS ? so that I can go boot into recovery in the shut down menu ? Also I tried to flash a rom in rom slot 2 and the flash failed what did I do wrong ? I thank you in advance for your help and advice.
Click to expand...
Click to collapse
Do you have the 3.75 B04 version or the B03? Is the app installed? If it is, have you opened it and installed recovery from app?
Are you installing the rom from your external sd card? I have noticed since upgrading from 3.65 that I can no longer install roms from the External sd card. If it is on the internal storage, then it works.
strider5236 said:
Do you have the 3.75 B04 version or the B03? Is the app installed? If it is, have you opened it and installed recovery from app?
Are you installing the rom from your external sd card? I have noticed since upgrading from 3.65 that I can no longer install roms from the External sd card. If it is on the internal storage, then it works.
Click to expand...
Click to collapse
Hello @strider5236, I installed SS on the internal storage and when I opened the app at the bottom it said 3.72 I am not sur if it was B04 or B03
wilspeak said:
Hello @strider5236, I installed SS on the internal storage and when I opened the app at the bottom it said 3.72 I am not sur if it was B04 or B03
Click to expand...
Click to collapse
Okay, you are on an older version. You need to update to 3.75 B04, or if there is a newer one at this point, us it.
You will need to go to safestrap app and uninstall the current build. Then open up the apk of the new version and install it. Open the app up after install and have it install Safestrap recovery. All set and all should work again with rom slots.:good:
strider5236 said:
Okay, you are on an older version. You need to update to 3.75 B04, or if there is a newer one at this point, us it.
You will need to go to safestrap app and uninstall the current build. Then open up the apk of the new version and install it. Open the app up after install and have it install Safestrap recovery. All set and all should work again with rom slots.:good:
Click to expand...
Click to collapse
Help Im in trouble...was on the 3.72 downloaded the 3.75 B04 uninstalled the 3.72 then installed the 3.75 now i'm bootlooping help!
ilpleasu said:
Help Im in trouble...was on the 3.72 downloaded the 3.75 B04 uninstalled the 3.72 then installed the 3.75 now i'm bootlooping help!
Click to expand...
Click to collapse
The last time I had a boot loop on NC2, I just reflashed the modem to get everything back. If that does not work, you may have to reflash stock MJE and start over with root and upgrade to NC2.
strider5236 said:
The last time I had a boot loop on NC2, I just reflashed the modem to get everything back. If that does not work, you may have to reflash stock MJE and start over with root and upgrade to NC2.
Click to expand...
Click to collapse
Got it to work, just just put the phone in download mode and canceled the reboot and it booted up in the new 3.75 recovery no problem. az_biker gave me the scope....
ilpleasu said:
Got it to work, just just put the phone in download mode and canceled the reboot and it booted up in the new 3.75 recovery no problem. az_biker gave me the scope....
Click to expand...
Click to collapse
Sweet. A lot easier then my fix.:good:
strider5236 said:
Okay, you are on an older version. You need to update to 3.75 B04, or if there is a newer one at this point, us it.
You will need to go to safestrap app and uninstall the current build. Then open up the apk of the new version and install it. Open the app up after install and have it install Safestrap recovery. All set and all should work again with rom slots.:good:
Click to expand...
Click to collapse
ok @strider5236 I got it from here >>>>>http://forum.xda-developers.com/devdb/project/dl/?id=7190, I am going to try now Thank You and will let you know how it goes .
ilpleasu said:
Got it to work, just just put the phone in download mode and canceled the reboot and it booted up in the new 3.75 recovery no problem. az_biker gave me the scope....
Click to expand...
Click to collapse
Hello brother @ilpleasu I just seen that you got your device back online, The same thing happened to me , but I re flashed the rom from a back up , thats why its important to make a back up of the rom when its in good condition , just in case of a brick or bootloop . Seeking light in the East, Sons Of Wadley Lodge 129 ^<V>^
strider5236 said:
Okay, you are on an older version. You need to update to 3.75 B04, or if there is a newer one at this point, us it.
You will need to go to safestrap app and uninstall the current build. Then open up the apk of the new version and install it. Open the app up after install and have it install Safestrap recovery. All set and all should work again with rom slots.:good:
Click to expand...
Click to collapse
I just installed the 3.75 B04 apk and the results are the same , its works , but remains disabled and I have to go into the app in oder to boot into recovery. I was told thats because I am on the NC4 build
wilspeak said:
I just installed the 3.75 B04 apk and the results are the same , its works , but remains disabled and I have to go into the app in oder to boot into recovery. I was told thats because I am on the NC4 build
Click to expand...
Click to collapse
Ahhh, I am on NC2 so that may be why I do not experience that problem. You may have to wait for next build for it to be fixed. That is unless someone else comes up with a fix for you.
If you do just a normal reboot, and once rebooted, does Safestrap menue come up? Or does it just boot directly to the rom?
wilspeak said:
Hello brother @ilpleasu I just seen that you got your device back online, The same thing happened to me , but I re flashed the rom from a back up , thats why its important to make a back up of the rom when its in good condition , just in case of a brick or bootloop . Seeking light in the East, Sons Of Wadley Lodge 129 ^<V>^
Click to expand...
Click to collapse
Greetings to you my Brother @wilspeak, it was so simple in my case, it was just some sort of glitch is all. Took like 1 sec to solve. then after all that work i realized that i didn't have to go through updating ss. I'm not gonna use the slots 1-4 anyways. Only doing 1 Rom at a time....O well...
Theirs always help for TWS....I hail from The Most Worshipful Sons Of Light Grand Lodge. Oasis Of Nevada. I AM!
---------- Post added at 11:24 PM ---------- Previous post was at 11:21 PM ----------
wilspeak said:
Hello brother @ilpleasu I just seen that you got your device back online, The same thing happened to me , but I re flashed the rom from a back up , thats why its important to make a back up of the rom when its in good condition , just in case of a brick or bootloop . Seeking light in the East, Sons Of Wadley Lodge 129 ^<V>^
Click to expand...
Click to collapse
wilspeak said:
I just installed the 3.75 B04 apk and the results are the same , its works , but remains disabled and I have to go into the app in oder to boot into recovery. I was told thats because I am on the NC4 build
Click to expand...
Click to collapse
So you took the OTA update or did you purchase a new Note3 with NC4 on it?
Hey Brethren, past master of George H. Taber lodge Fairhaven Massachusetts here
Sent from my SM-N900V using XDA Premium 4 mobile app
I can't get safe strap to boot into recovery. I've tried both 03 & 04 versions. I am running Beantown's NC2 build when KK first launched. Every other method I used to boot into recovery gives me a bootloop. Might just have to ODIN back to stock and start from scratch. Any ideas while I'm at work?
Related
Anyone figure out how to root the new OTA? It wont allow root with the old flash way since its new OTA
timenewton said:
Anyone figure out how to root the new OTA? It wont allow root with the old flash way since its new OTA
Click to expand...
Click to collapse
Yes use the new IOROOT15 to root the device. But I have been unsuccessful in flashing any roms, however I did get twrp to work with FreeGee app in the android market.
I appreciate your help very much, thank you
jea508 said:
Yes use the new IOROOT15 to root the device. But I have been unsuccessful in flashing any roms, however I did get twrp to work with FreeGee app in the android market.
Click to expand...
Click to collapse
What version of twrp? Sounds like you may need to update.
Sent from my LG-D800
btm fdr said:
What version of twrp? Sounds like you may need to update.
Sent from my LG-D800
Click to expand...
Click to collapse
Im still using the twrp that was flashed with freegee. i'm a newb to all this. Maybe i should flash new version of twrp and try. I was trying to install the mal 4.2.2 rom and just got lg screen, then black.
jea508 said:
Im still using the twrp that was flashed with freegee. i'm a newb to all this. Maybe i should flash new version of twrp and try. I was trying to install the mal 4.2.2 rom and just got lg screen, then black.
Click to expand...
Click to collapse
I've been unsuccessful in getting any roms to work. I tried 4.2.2 rom and got lg screen then black, had to restore nand backup from twrp recovery but it was hellish to get into, had to do the hold vol+pwr precisely, almost gave up. So, reverted to a backup just fine.
Next tried to loki_flash recovery 2.6.3.1 (then was going to do them in order-2.6.3.2>2.6.3.3 [have not tried going directly to 2.6.3.3) and was hit with an unsupported aboot error (device mismatch).
So now i'm going to try and use flash tool to revert back to 11A, root, install twrp (I hope this is possible and I don't brick my phone [i'm new to all of this])
Anyone tell me if this is an acceptable option to proceed? Thank's in advance.
Acceptable. KDZ to 11A.
Just wanted to post I was successful using lg flash tool to revert to 11A, rooted, freegee twrp, flashed 2.6.3.3, flashed OSE ROM. Everything is well ATM!
Sent from my LG-VS980 using Tapatalk
I'm relatively new to rooting and recovery.
I was on rooted 4.2.2, I took the ora and locked my bootloader like an idiot. But did manage to do the safestrap workaround and got myself up to a rooted rom of NC2. I'm finally back to a functional setup with accounts and apps where I want them. So I thought I'd do a back up in Twrp.
I deleted my old backup and the other twrp file in the directory. I tried but it failed. Gave the error...unable to mount /system.
Any tthoughts on how I could get a full backup of my system? Thanks in advance.
georgshah said:
I'm relatively new to rooting and recovery.
I was on rooted 4.2.2, I took the ora and locked my bootloader like an idiot. But did manage to do the safestrap workaround and got myself up to a rooted rom of NC2. I'm finally back to a functional setup with accounts and apps where I want them. So I thought I'd do a back up in Twrp.
I deleted my old backup and the other twrp file in the directory. I tried but it failed. Gave the error...unable to mount /system.
Any tthoughts on how I could get a full backup of my system? Thanks in advance.
Click to expand...
Click to collapse
Install Safestrap 3.72 or flash the 4.3 kernel just to make a backup and then back to 4.4.2 kernel.
Sent from my SGH-I337 running BlackBox 3.0
DeadlySin9 said:
Install Safestrap 3.72 or flash the 4.3 kernel just to make a backup and then back to 4.4.2 kernel.
I tried safestrap 3.72. But couldn't get into recovery. Do I need to install recovery again from within safestrap 3.72?
Click to expand...
Click to collapse
georgshah said:
DeadlySin9 said:
Install Safestrap 3.72 or flash the 4.3 kernel just to make a backup and then back to 4.4.2 kernel.
I tried safestrap 3.72. But couldn't get into recovery. Do I need to install recovery again from within safestrap 3.72?
Click to expand...
Click to collapse
Yes. Safest way is to uninstall recovery in your current version, install the 3.72 apk, and then install. Installing the APK alone doesn't update Safestrap, you always have to hit install.
Click to expand...
Click to collapse
DeadlySin9 said:
georgshah said:
Yes. Safest way is to uninstall recovery in your current version, install the 3.72 apk, and then install. Installing the APK alone doesn't update Safestrap, you always have to hit install.
Click to expand...
Click to collapse
I had a version that was for another platform. I found the right version and all is well now.
Thanks
Click to expand...
Click to collapse
DeadlySin9 said:
Install Safestrap 3.72 or flash the 4.3 kernel just to make a backup and then back to 4.4.2 kernel.
Sent from my SGH-I337 running BlackBox 3.0
Click to expand...
Click to collapse
i'm encountering the same problem....getting unable to mount /system in safestrap. i'm on 3.72 using a 4.4.2 rom. if i flash the 4.3 kernel, will i still be able to run a 4.4.2 custom rom?
syqe said:
i only have found that keeeeyyyyyybbbooooarrrdddd issue :S
noone else noticed it?
edit:
btw, is there a way to blink the red light when we hv a new sms?
Click to expand...
Click to collapse
I had a problem similar to yours. I found out that my Sdcard was bad or KitKat damaged it. I got a new card I am able to backup and flash roms without losing any data.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
---------- Post added at 01:09 PM ---------- Previous post was at 01:07 PM ----------
netomel said:
I had a problem similar to yours. I found out that my Sdcard was bad or KitKat damaged it. I got a new card I am able to backup and flash roms without losing any data.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
georgshah said:
I'm relatively new to rooting and recovery.
I was on rooted 4.2.2, I took the ora and locked my bootloader like an idiot. But did manage to do the safestrap workaround and got myself up to a rooted rom of NC2. I'm finally back to a functional setup with accounts and apps where I want them. So I thought I'd do a back up in Twrp.
I deleted my old backup and the other twrp file in the directory. I tried but it failed. Gave the error...unable to mount /system.
Any tthoughts on how I could get a full backup of my system? Thanks in advance.
Click to expand...
Click to collapse
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Looking for the same answer and couldnt find it so I played with terminal in safestrap AT&T i337 4.4.2 and found that you can work around in order to mount system. Go to advanced terminal select root then type mount /dev/block/mmcblk0p16 system rw and it works dont know yet if it allows me to fix installing to system but I did click filemanager to see if /system was mounted and it is!
EDIT: Not a fix still wont install to /system but it lets me edit files in the file manager
Dont ask me how I fixed but I did... just continue messing with it till it works
Hi Folks. I followed the instructions on the ATT All Things thread to get to NC1 update, then rooted using towlroot and all that works great. I can't get SafeStrap to work using the instructions though. I can install it, click install to install recovery and it says Installation Complete but State shows Not Installed and Safe System shows not active as well. Not sure what to do from here. I see nothing on the main thread about this. When I open Rom Manager it says I have ClockworkMod and TWRP installed as well from what i can tell. Not sure what is going on here. Help appreciated. Thanks.
fuzzyreets said:
Hi Folks. I followed the instructions on the ATT All Things thread to get to NC1 update, then rooted using towlroot and all that works great. I can't get SafeStrap to work using the instructions though. I can install it, click install to install recovery and it says Installation Complete but State shows Not Installed and Safe System shows not active as well. Not sure what to do from here. I see nothing on the main thread about this. When I open Rom Manager it says I have ClockworkMod and TWRP installed as well from what i can tell. Not sure what is going on here. Help appreciated. Thanks.
Click to expand...
Click to collapse
You mentioned that ALL Thing ATT and NC1 so you have SGH-I337 with NC1 firmware.
For NC1 firmware you can not use the CWM and TWRP anymore. The only recovery you can use is Safestrap.
Did you check your root access before you install the Safestrap.
Try to restart your phone with regular reboot (not to recovery) and see whether the safestrap pop up in the boot process.
sway8966 said:
You mentioned that ALL Thing ATT and NC1 so you have SGH-I337 with NC1 firmware.
For NC1 firmware you can not use the CWM and TWRP anymore. The only recovery you can use is Safestrap.
Did you check your root access before you install the Safestrap.
Try to restart your phone with regular reboot (not to recovery) and see whether the safestrap pop up in the boot process.
Click to expand...
Click to collapse
Nothing out of the ordinary pops up during boot. Just standard Samsung & ATT splashscreens.
Also I just reset the phone, confirmed root, reinstalled safestrap and still the same. It does nothing to the phone even though it says Installation Complete.
Do I have to have the SIM in? I can't imagine I do but I currently do not. Just running off of wifi.
fuzzyreets said:
Do I have to have the SIM in? I can't imagine I do but I currently do not. Just running off of wifi.
Click to expand...
Click to collapse
You have to use SELinux mode changer and set it to permissive.
Sent from my SGH-I337 running GPE
DeadlySin9 said:
You have to use SELinux mode changer and set it to permissive.
Sent from my SGH-I337 running GPE
Click to expand...
Click to collapse
Thank you. That worked. I have no idea why that isn't on the original instruction page. VERY MUCH appreciated. Do I have to do that every time I reboot with the selinux change app?
fuzzyreets said:
Thank you. That worked. I have no idea why that isn't on the original instruction page. VERY MUCH appreciated. Do I have to do that every time I reboot with the selinux change app?
Click to expand...
Click to collapse
It was because original instruction page was written before the towlroot method.
You do not need to use that selinux change app every time you reboot unless your SE for Android status is changed.
I had rooted my phone using the downgrade method a while back (MK2 -> NB1?) For whatever reason, I decided I wanted to flash a clean ROM. I went ahead and flashed I337UCUFNB1_Rootable_Full_Odin and rooted with Towelroot (I never wiped cache or data with Safestrap before...completely forgot about it). I am now on rooted NB1 with superuser installed, however Safestrap refuses to install. After I install the recovery, even though it states the installation was complete, the status of Safestrap is still "Not Installed".
Did I make a booboo by not wiping/uninstall safestrap beforehand? Is the old version and the new conflicting? halp
Unistall the recovery using the previous version of the app and then install the new version
jmjoyas said:
Unistall the recovery using the previous version of the app and then install the new version
Click to expand...
Click to collapse
Meaning install 3.71, uninstalling, rebooting, installing 3.72, then installing again? That didn't do anything for me
Outta the loop
Possibly stupid question, but what is Safestrap? I haven't been around here in a year or so
FlashThisB said:
Possibly stupid question, but what is Safestrap? I haven't been around here in a year or so
Click to expand...
Click to collapse
What seems to be a very simple and on the surface recovery mode for phones with locked bootloaders.
SELinux Mode Changer solved my problem.
FlashThisB said:
Possibly stupid question, but what is Safestrap? I haven't been around here in a year or so
Click to expand...
Click to collapse
If you are on MDL build, you don't need it. You can read up on it in Development, HashCode has a thread there--
Q&A for [RECOVERY LOCKED/NCG] Safestrap Recovery v3.75 [2014-06-26 B03]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Safestrap does not work
Hi, this is my first time ask for help. I have verizon samsung galaxy s4 and currently with hyperdrive 18.1 and safestrap 3.75. For some reason, I found my safesrtrap does not work. I touch the screen, nothing happened. I lock screen and swip to unlock, nothing happened. Feel like touch screen does not work. Could anybody help me? Thanks
doubletong said:
Hi, this is my first time ask for help. I have verizon samsung galaxy s4 and currently with hyperdrive 18.1 and safestrap 3.75. For some reason, I found my safesrtrap does not work. I touch the screen, nothing happened. I lock screen and swip to unlock, nothing happened. Feel like touch screen does not work. Could anybody help me? Thanks
Click to expand...
Click to collapse
are you using the safestrap from the s4 or from the s5 thread? if so, try using the s4 ss apk
Sent from my SM-G900V using XDA Free mobile app
Splash screen shows after apk removal of SS 3.75
I have read numerous threads and can not find a clearly define method for removing all traces of safe strap 3.75 if there is one kindly point me to it.
device VZW Note 3, running Kit kat, rooted via geohot towelroot method, Su pro version 1.99
1. I have removed SS by uninstalling recovery then uninstalling the app.
2. On initial start up no safe strap screen.
3. On reboots "custom "pad lock shows as if Safe Strap is still installed.
4.After Safe Strap apk removal SU binaries wont update either even after the 5 reboots attempts
I have seen the manual remove method for SafeStrap versions 3.62 and lower:
su
mount -o remount,rw /system
mv /system/etc/init.qcom.modem_links.sh.bin /system/etc/init.qcom.modem_links.sh
rm -rf /system/etc/safestrap
rm /system/etc/firmware/q6.mdt
ln -s /firmware/image/q6.mdt /system/etc/firmware/q6.mdt
mount -o remount,ro /system
Can I do this manually for the 3.75 version of safe strap? I just want to remove all traces of safe strap (all splash screens ) and update SU binaries post its removal.
Thanks!
Backups being removed
I installed SafeStrap 3.75 on my s5 and it runs, and says it backs up properly to the sd card, but when I reboot back into Android, the backup file is no where to be found. The TWRP folder on the sdcard is empty. Does anyone know why the file would that it exists inside safestrap, but disappear after reboot?
I've got NCG installed, I've rooted, installed SuperSU, Installed the latest busybox and I've installed and run sdfix to fix the permissions on the SD Card, yet every backup I make is removed from the sd card.
It DOES backup successfully to the internal device storage, thoughts?
did not find delete option for posts...
ahbeeneverywhereman said:
did not find delete option for posts...
Click to expand...
Click to collapse
You can not remove your own posts. It has to be deleted by someone with the authority to do so.
Verizon Galaxy S5 Safestrap and NI2 ROMS
Hello everyone,
First time poster, long time lurker.
I usually just lurk until I find the answers to my questions. I figured I can become an active member of the community now.
I have a rooted Galaxy S5 running on the NCG build. I want to install a custom ROM using Safestrap 3.75. Then I want to install Optimal ROM which is running on NI2. For which I believe I will have to install the NI2 firmware tar.
What exactly is the NI2 firmware tar (is this the kernal)? And if I install it, will it remove root (I'm logically assuming no but I need some confidence on the quesion)?
Much appreciated!
safestrap help!
i have a verizon galaxy s5, model number sm-g900v, android version 4.4.4, baseband version ending in ank2, kernel version 3.4.0, build number ending in ank2. i have flashed back to baseband NCG via odin v3.09, rooted via towelroot, verified root via root check lite, flashed back to baseband version ending in ANK2 via odin v3.09, verified root via root check lite, installed superSU by chainfire, installed busybox by jrummy apps inc, installed titanium backup and performed backup.... so my question is, will the current safestrap for verizon gs5 work with my phone? the thing that kinda worries me is the link >> Safestrap-KLTEVZW-NCG-3.75-B03.apk<< shows "NCG". does this mean NCG and up or NCG only? if it means NCG only, where is the ANK2 safestrap? what are my options for a recovery?
LLG BAD HABIT CC said:
i have a verizon galaxy s5, model number sm-g900v, android version 4.4.4, baseband version ending in ank2, kernel version 3.4.0, build number ending in ank2. i have flashed back to baseband NCG via odin v3.09, rooted via towelroot, verified root via root check lite, flashed back to baseband version ending in ANK2 via odin v3.09, verified root via root check lite, installed superSU by chainfire, installed busybox by jrummy apps inc, installed titanium backup and performed backup.... so my question is, will the current safestrap for verizon gs5 work with my phone? the thing that kinda worries me is the link >> Safestrap-KLTEVZW-NCG-3.75-B03.apk<< shows "NCG". does this mean NCG and up or NCG only? if it means NCG only, where is the ANK2 safestrap? what are my options for a recovery?
Click to expand...
Click to collapse
No worries SafeStrap works fine with all the kernels so far. Just use the updated one here.
thanks!
Misterxtc said:
No worries SafeStrap works fine with all the kernels so far. Just use the updated one here.
Click to expand...
Click to collapse
thats what i assumed but didnt want to try until i got a confidence boost (its my only phone at the moment). i tried downloading your beta but got a 404 not found error. again, i assume thats because its out of beta with known issues having been fixed as its kind of an old post. the one i downloaded (from the same thread) seems to be working just fine (have yet to flash a rom... that will come tomorrow). thanks for the quick response; thats part of what makes great communities. BTW i hit that thanks button.
LLG BAD HABIT CC said:
thats what i assumed but didnt want to try until i got a confidence boost (its my only phone at the moment). i tried downloading your beta but got a 404 not found error. again, i assume thats because its out of beta with known issues having been fixed as its kind of an old post. the one i downloaded (from the same thread) seems to be working just fine (have yet to flash a rom... that will come tomorrow). thanks for the quick response; thats part of what makes great communities. BTW i hit that thanks button.[/QUOT
Did you try SS on ANK2? did it work? I just got the phone back from Samsung, don't wanna mess it up Thanks!
Click to expand...
Click to collapse
dj_ox said:
LLG BAD HABIT CC said:
thats what i assumed but didnt want to try until i got a confidence boost (its my only phone at the moment). i tried downloading your beta but got a 404 not found error. again, i assume thats because its out of beta with known issues having been fixed as its kind of an old post. the one i downloaded (from the same thread) seems to be working just fine (have yet to flash a rom... that will come tomorrow). thanks for the quick response; thats part of what makes great communities. BTW i hit that thanks button.[/QUOT
Did you try SS on ANK2? did it work? I just got the phone back from Samsung, don't wanna mess it up Thanks!
Click to expand...
Click to collapse
Yes sir. Worked fine. NK2 baseband, android version 4.4.4
Sent from my SM-G900V using XDA Free mobile app
Click to expand...
Click to collapse
outpost785
Sorry if this has been asked already ,safestrap for s5 on rooted stock 5.0 .Safestrap says its installed but will not work.Thanks inadvance.
outpost785 said:
Sorry if this has been asked already ,safestrap for s5 on rooted stock 5.0 .Safestrap says its installed but will not work.Thanks inadvance.
Click to expand...
Click to collapse
I had to run the SS and SuperSu step again.
Rapunzl said:
I had to run the SS and SuperSu step again.
Click to expand...
Click to collapse
Are you saying that you are able to access the safestrap recovery while running the 5.0 kernel? All reports state that ss will no longer work on the 5.0 kernel.
That's what I have found myself that ss is a no go on 5.0 hopefully someone finds a work around, I can't boot into stock recovery
outpost785 said:
That's what I have found myself that ss is a no go on 5.0 hopefully someone finds a work around, I can't boot into stock recovery
Click to expand...
Click to collapse
The ss recovery will work on a 5.0 build by downgrading the kernel back to nk2.
But can/can't run 5.0 on nk2 kernel?
outpost785 said:
But can/can't run 5.0 on nk2 kernel?
Click to expand...
Click to collapse
5.0 will not boot on the NK2 kernel.