Here's the new update that came out today - XNPH25R. This has the assert junk removed so you can flash it in TWRP.
NOTHING has been changed in this other than the ability to flash it in TWRP.
Reboot to recovery, flash .zip. Reboot to system. Nothing fancy required. *Flash SuperSU if you want root access.
https://www.4shared.com/download/4UoLVwKIce/cm-bacon-XNPH25R_fix.zip?lgfp=3000
I'm getting binary update script error by flashing with TWRP
I flashed the stock OTA in TWRP right from my phone. Go to Developer settings adn uncheck the update CM recovery setting and OTA will flash in TWRP. I kept root. I'm not sure if the 4.4 update will kill root, but I doubt it. Thanks for providing the zip!
With the option to update CM recovery via OTAs does that mean we can take OTAs with TWRP installed?
Hey Guys Can I flash this zip file through CWM ???? Please suggest...........
Update = flashed the official cm-11.0-XNPH22R-bacon-signed file & then received the OTA & it's installed successfully even with CWM install.
iamacronym said:
With the option to update CM recovery via OTAs does that mean we can take OTAs with TWRP installed?
Click to expand...
Click to collapse
I think you have to disable that option in developer settings menu, if you want to be able to flash the OTA with TWRP.
Works for me
Updated it using TWRP but once booted it tells me there's an udpate, over and over... update in TWRP seems to work (no fails, only message is "radio image updated")
I flashed the file and when I reboot i´m still on XNPH22R and it also does prompt for the update. I flashed it on twrp, everything seemed ok
Flashed the file with both TWRP and Philz, no error but the Rom version is still 22R !
Can someone post the stock recovery img please?
ToRvaLDs said:
Flashed the file with both TWRP and Philz, no error but the Rom version is still 22R !
Can someone post the stock recovery img please?
Click to expand...
Click to collapse
Yeah I get the same issue where it shows as the flashing being successful,but reboots back to 22R.
housry23 said:
I flashed the stock OTA in TWRP right from my phone. Go to Developer settings adn uncheck the update CM recovery setting and OTA will flash in TWRP. I kept root. I'm not sure if the 4.4 update will kill root, but I doubt it. Thanks for providing the zip!
Click to expand...
Click to collapse
Which folder was the OTA located in? Is it the cache one at root level?
Sent from N5 or OPO
truckroot said:
Which folder was the OTA located in? Is it the cache one?
Sent from N5 or OPO
Click to expand...
Click to collapse
I couldn't tell you. I got a notification that an update was available, tapped install and it booted into twrp and installed the update. I had to reinstall xposed but kept root and twrp.
Sent from my OnePlus One
housry23 said:
I couldn't tell you. I got a notification that an update was available, tapped install and it booted into twrp and installed the update. I had to reinstall xposed but kept root and twrp.
Sent from my OnePlus One
Click to expand...
Click to collapse
OK thx. Wasn't sure if u had to navigate to a certain folder when twrp booted up. Stock OTAs in a custom recovery is new territory for me.
Sent from N5 or OPO
truckroot said:
OK thx. Wasn't sure if u had to navigate to a certain folder when twrp booted up. Stock OTAs in a custom recovery is new territory for me.
Sent from N5 or OPO
Click to expand...
Click to collapse
I would say it's new territory for all of us. I do have the option to update cm recovery unchecked in developer settings.
Sent from my OnePlus One
housry23 said:
I would say it's new territory for all of us. I do have the option to update cm recovery unchecked in developer settings.
Sent from my OnePlus One
Click to expand...
Click to collapse
True. I have that unchecked and also had the system update apk frozen just out of habit.
Leave it to CM to allow OTAs to be installed thru twrp/cwm. Living this phone more and more each day.
Sent from N5 or OPO
Is it supposed to be about 23.55 mb only? Everytime i flash nothing changes...
Sent from my One using XDA Free mobile app
truckroot said:
Which folder was the OTA located in? Is it the cache one at root level?
Sent from N5 or OPO
Click to expand...
Click to collapse
The downloaded OTA is located in \cache and can be flashed trough TWPR. Unfortunately I get an error of missing apks in \system due to deleting some of them (CM File Manager, PrintSpooler, ...).
I'll try to throw them back to \system and retry flashing.
Nope nope nope, doesn't work. He says blabla build.prop because of changed DPI, but it gave me an error on executing the update binary anyway.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is what happens when you try to flash the original OTA .zip in TWRP. When flashing the provided zip in OP I don't get an error but like everybody said it doesn't update to 25.
fiz:ik said:
Nope nope nope, doesn't work. He says blabla build.prop because of changed DPI, but it gave me an error on executing the update binary anyway.
Click to expand...
Click to collapse
Someone has the original build.prop? We can try to restore it and update.
ToRvaLDs said:
Someone has the original build.prop? We can try to restore it and update.
Click to expand...
Click to collapse
I've got it. Do you need? Texdroider DPI makes an backup of the original build.prop. I restored it and the issue is solved but nevertheless the update binary can't be executed.
Flashed CWM over TWRP: with CWM same problem. I restored original build.prop and it's still complaining about in the build prop.
Okay, seems that my backup of build.prop isn't the stock build.prop but an updated version with DPI of 380, damn. Can anyone upload the original one?
Can you upload the original build.prop please? Are you sure that the old file has the correct cm revision?
Inviato dal mio One utilizzando Tapatalk
Related
I keep getting notification that 4.3 is downloaded, but I cant seem to install it with my custom recovery mod. Do I need to do it a different way?
Thanks all.
m374llic4 said:
I keep getting notification that 4.3 is downloaded, but I cant seem to install it with my custom recovery mod. Do I need to do it a different way?
Thanks all.
Click to expand...
Click to collapse
theres numerous info on this already but im feeling helpful
answer a few questions please:
cwm or twrp?
any modifications tu build.prop? ( this would include the fix to enable LTE)
stock kernel?
stock radio?
I'll jump in as op has gone awol.
Stock everything bar unlocked and rooted twrp
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
uploder said:
theres numerous info on this already but im feeling helpful
answer a few questions please:
cwm or twrp?
any modifications tu build.prop? ( this would include the fix to enable LTE)
stock kernel?
stock radio?
Click to expand...
Click to collapse
Sorry, have been busy at work.
CWM 6.0.2.3
Only modification besides running the SU app is I just recently installed the .33 modem with the sound fix for 4g. Stock kernel.
m374llic4 said:
Sorry, have been busy at work.
CWM 6.0.2.3
Only modification besides running the SU app is I just recently installed the .33 modem with the sound fix for 4g. Stock kernel.
Click to expand...
Click to collapse
I'm in the same boat. I'm running stock 4.2.2. ROM. Rooted, CWM 6.0.3.5, and I installed the AIO LTE .zip (I can't remember if I'm currently on the .33 or .27 radio). I received the 4.3 update OTA and just tried to install. I put me in CWM and asked me if I want to "install unkown zip" . I assumed that was the OTA update and selected yes. It seemed to do the install and reboot. However, I'm still on 4.2.2. Stranger still, when check for updates, it says I'm current.
SHPhone said:
I'm in the same boat. I'm running stock 4.2.2. ROM. Rooted, CWM 6.0.3.5, and I installed the AIO LTE .zip (I can't remember if I'm currently on the .33 or .27 radio). I received the 4.3 update OTA and just tried to install. I put me in CWM and asked me if I want to "install unkown zip" . I assumed that was the OTA update and selected yes. It seemed to do the install and reboot. However, I'm still on 4.2.2. Stranger still, when check for updates, it says I'm current.
Click to expand...
Click to collapse
The OTA won't install with a non-stock radio (I think) & the AIO flashable makes changes to the build.prop which will also prevent the OTA from installing.
3rdstring said:
The OTA won't install with a non-stock radio (I think) & the AIO flashable makes changes to the build.prop which will also prevent the OTA from installing.
Click to expand...
Click to collapse
Bingo! The AIO enabler does in fact make changes to your build prop which will cause the update to fail every time. Here's what I did. Flashed the stock 4.2.2 boot and system imgs via fastboot.(used the toolkit ) after which I manually flashed the stock radio (.48) and stock kernel. It worked after that. Gimmie a few and I'll link the files needed.
Sent from my Nexus 4 using xda app-developers app
ok here they are. of course before you do anything make a nandroid backup just incase.
stock kernel, and image are here. http://forum.xda-developers.com/showthread.php?t=2145848
you want to download the stock 4.2.2 image and extract the boot and system imgs to be flashed via fastboot.
also since my initial ota failed and I didnt want to wait for my phone to get it again I just downloaded the stock 4.3 image.
its the first link "4.3-JWR66V-from-4.2.2 JDQ39"
stock radio is here. you want .48 and you just flash in cwm
http://forum.xda-developers.com/showthread.php?t=2087227
---------- Post added at 02:17 AM ---------- Previous post was at 01:59 AM ----------
almost forgot. after you flash the 4.3 upgrade you also need to flash the latest superuser in cwm. after that once you reboot cwm will ask if you want to disable recovery flash. select yes
uploder said:
almost forgot. after you flash the 4.3 upgrade you also need to flash the latest superuser in cwm. after that once you reboot cwm will ask if you want to disable recovery flash. select yes
Click to expand...
Click to collapse
you mean select No
ksilver89 said:
you mean select No
Click to expand...
Click to collapse
I mean yes. disable recovery flash so he keeps cwm. but if he wanted stock recovery then he'd select no
uploder said:
I mean yes. disable recovery flash so he keeps cwm. but if he wanted stock recovery then he'd select no
Click to expand...
Click to collapse
That way he'd lose root, right? or they have not using install-recovery.sh to root anymore?
Just re root again after
Hello guys,
New CM11S OTA Released ...
XNPH25R Incremental, -- FIX : NFC & Gyroscope.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi,
I've unlocked the bootloader, instaled TWRP as recovery and rooted it, now, when the OTA message appears and I click on it, it reboot into recovery, but the updated is not performed... any idea how should I apply the update with the custom recovery?
Thanks
ICEM4N99 said:
Hi,
I've unlocked the bootloader, instaled TWRP as recovery and rooted it, now, when the OTA message appears and I click on it, it reboot into recovery, but the updated is not performed... any idea how should I apply the update with the custom recovery?
Thanks
Click to expand...
Click to collapse
Hi,
I've red in the Opo Forum that OTA currently only works with Stock Recovery or Clockworkmod Recovery, but not TWRP.
Greetz
Uludag
Uludag said:
Hi,
I've red in the Opo Forum that OTA currently only works with Stock Recovery or Clockworkmod Recovery, but not TWRP.
Greetz
Uludag
Click to expand...
Click to collapse
Take backup
1) do a full-wipe and try again..
2) do a full-wipe and install CM11S -- 22R freshly from fastboot and try... (install TWRP & root )
3) Try ota zip and flash... from
http://forum.xda-developers.com/oneplus-one/development/ota-stock-xnph25r-ota-t2804155
https://www.4shared.com/download/4UoLVwKIce/cm-bacon-XNPH25R_fix.zip?lgfp=3000
Uludag said:
Hi,
I've red in the Opo Forum that OTA currently only works with Stock Recovery or Clockworkmod Recovery, but not TWRP.
Greetz
Uludag
Click to expand...
Click to collapse
Not really , my opo is rooted and has TWRP , OTA was successfully installed through TWRP and the phone is still rooted
Make sure that "Update CM recovery" in developer options is unchecked and try again
king1990 said:
Not really , my opo is rooted and has TWRP , OTA was successfully installed through TWRP and the phone is still rooted
Make sure that "Update CM recovery" in developer options is unchecked and try again
Click to expand...
Click to collapse
I didn't even received my Opo, will hopefully arrive today :laugh:fingers-crossed: I just wanted to tell what I heard.
Updated it using TWRP but once booted it tells me there's an udpate, over and over... update in TWRP seems to work (no fails, only message is "radio image updated")
I'm rooted unlocked and using TWRP and it worked fine for me...
Mnt-XDA said:
Hello guys,
New CM11S OTA Released ...
XNPH25R Incremental, -- FIX : NFC & Gyroscope.
Click to expand...
Click to collapse
Apparently, that's not all:
People who have received a OnePlus One through one means or another are now receiving an over-the-air software update that addresses a charging issue affecting the device. Sometimes the phone would think it's plugged into USB when it's actually plugged into AC power and, as a result, charge only half as fast, if not slower. The handset would display Charging (USB) instead of Charging (AC).
Click to expand...
Click to collapse
Source: Android Police
Seems to TWRP has been removed after OTA update. First time it run update with TWRP but update notification still stay in tray. And after second try it disappear but together with TWRP
Works for me too. Using TWRP as Recovery. Press the OTA update then reboot into Recovery Mode automatically and process the rest upgrade command
hi guys, i have a problem istalling this ota update... in the previous version i cancelled cclock app and now when i try to update it fails do to system cant find the app. i tried also to manually istall the app without result... so i cant update!!! anyone know hot to solve without flash the firmware?
thank you!
CafeKampuchia said:
Apparently, that's not all:
Source: Android Police
Click to expand...
Click to collapse
You are right .... Charger AC/USB bug is also fixed ... I have mentioned the same on my OnePlusOne Forum Thread.. yesterday
Mnt-XDA said:
You are right .... Charger AC/USB bug is also fixed ... I have mentioned the same on my OnePlusOne Forum Thread.. yesterday
Click to expand...
Click to collapse
I haven't received the update yet
Wish I hadn't taken the "update". My phone came rooted so I thought that was the default setting. This update killed root so I had the hassle of re-rooting my new phone. Also missing a few features now.
I just happened to do a software check, and it is downloading a new version. Any ideas? I was already on Lollipop.
Milkman00 said:
I just happened to do a software check, and it is downloading a new version. Any ideas? I was already on Lollipop.
Click to expand...
Click to collapse
More than likely security update for stagefright vulnerability. S5 got theirs a week or so ago.
pre4speed said:
More than likely security update for stagefright vulnerability. S5 got theirs a week or so ago.
Click to expand...
Click to collapse
400 megs for Stagefright? That seems pretty big.
OC2
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Milkman00 said:
400 megs for Stagefright? That seems pretty big.
Click to expand...
Click to collapse
Yeah it was 380 for the S5 too.
Thanks for the info. This was the only site that had ANY information about the update.
I'm on Lollipop, but Rooted. Will this update take away root by any chance?
My question exactly!
sibenj said:
I'm on Lollipop, but Rooted. Will this update take away root by any chance?
Click to expand...
Click to collapse
Typically these updates do remove root. Best to wait until someone has a root method figured out for the new update.
sibenj said:
I'm on Lollipop, but Rooted. Will this update take away root by any chance?
Click to expand...
Click to collapse
I just updated via the OTA method on AT&T. Rebooted twice. I still have root (verified by Root Checker). Here's my About page:
Here's the root checker pic:
I now have OC2. Update OTA with confidence!
I originally rooted OC1 (Lollipop) by following the Root/OC1 method.
EDIT: I just checked for stagefright vulnerability (via Stagefright detector). It reports that my device is NOT VULNERABLE. Nice.
I took the chance because this site has helped me in sooo many ways. It's the least I could do. Thanks everyone.
I'm rooted and my update failed at 26%
Sent from my SAMSUNG-SM-N900A using Tapatalk
Update failed for me at 25% too. I'm rooted OC1.
Does this update do more than just fix the stagefright exploit?
If not, then kmokhtar already posted a flashable update fix for stagefright which works great.
Could you post a link to that? I have been unable to find it via xda search, google search, browsing in note 3 forums...
Why is this 'update' 5.0? I could have sworn it was just up to 5.1.1
KestrelX said:
Could you post a link to that? I have been unable to find it via xda search, google search, browsing in note 3 forums...
Click to expand...
Click to collapse
http://forum.xda-developers.com/gal...stagefright-vulnerability-fix-note-3-t3175087
Can confirm that the update worked for me on rooted OC1, now shows OC2 and I retained full root on my phone.
ATT Ota file
https://mega.nz/#!TdE02KwJ!m4pkNivN9q2ZB7hGuXFiq872UoB8D-F-QpiPVX4sWI0
mine worked I am still rooted no problems no failure
peterson65 said:
mine worked I am still rooted no problems no failure
Click to expand...
Click to collapse
Those like me who have installed modded apps like S6 and have mixed in deodexed files, the OTA will fail. the OTA installer MD5 checks the system files and if any fail it will abort the Update. Any deodexed system files will also abort the Update
How to updated to OC2 if your OTA failed
1. Download and unzip and copy this Folder to OC1 stock root backup to your TWRP backup folder,
\TWRP\BACKUPS\0b70b440\N900A_OC1_Lollipop_Stock_Rooted_Backup
2. Copy OC1 kernel recovery installer to your sdcard SM-N900A_N900AUCUEOC1_KERNEL_Recovery-Flashable.zip
*** You can also go ahead and copy Safestrap-HLTEATT-NC2-3.75-B03[1].apk and NC2 Flasher to your sdcard ***
3 Download the OC2 OTA 2400258.cfg
rename the 2400258.cfg OC2 to 2400258.zip and copy to your sdcard
4 Install the OC1 backup,
N900A_OC1_Lollipop_Stock_Rooted_Backup.zip
5. Install OC1 Kernel
SM-N900A_N900AUCUEOC1_KERNEL_Recovery-Flashable.zip
6. (I did a factory wipe , but Warning you will loose UserData settings and Apps you installed) You might try without but if you had a custom SystemUI and Touchwiz as I did it might FC because you have setting in Userdata pertaining to the Custom apps that you will over write with the OC1 backup.
7. Select Reboot and then select Recovery to boot to stock recovery and install as a update from external storage. mine installed with no issues.
8. To get safe strap back working Download and copy Safestrap-HLTEATT-NC2-3.75-B03[1].apk to sdcard (if you have not done yet)
9. Download and copy NC2 Flasher by benwaffle
10. Install Safestrap-HLTEATT-NC2-3.75-B03, run app and install recovery ( do not press reboot to recovery, it will only take you to stock recovery)
11. Install NC2 Flasher app and then use it to boot to recovery.
12. Do a backup of your new OC2
Now you can customized and do what you want
When i root my S7 Edge, how to get OTA updates?
Is there any page to download it?
You can't get ota updates with root, you have to go into the dev section and basically download a rom with the current updates already installed.
crack00r said:
When i root my S7 Edge, how to get OTA updates?
Is there any page to download it?
Click to expand...
Click to collapse
1. You can't get OTA updates if you are rooted.
2. You have to flash the correct firmware via ODIN if you are rooted. One page to download the firmwares is this ONE.
crack00r said:
When i root my S7 Edge, how to get OTA updates?
Is there any page to download it?
Click to expand...
Click to collapse
never trust an OTA update it will just patch your FW and in time your device will become too slow,I always used this site to download and install the latest full updates using Odin.
http://www.sammobile.com/firmwares/database/SM-G935F/
http://www.sammobile.com/firmwares/
I installed TRWP and rooted my S7 Edge. What happens if I download the new stock rom from sammobile.com and flash it using TWRP or ODIN? Will I loose all apps/settings and will the phone still be rooted?
hagba said:
never trust an OTA update it will just patch your FW and in time your device will become too slow,I always used this site to download and install the latest full updates using Odin.
http://www.sammobile.com/firmwares/database/SM-G935F/
http://www.sammobile.com/firmwares/
Click to expand...
Click to collapse
I don't understand this. Isn't OTA full updates and flashes firmware, ROM and everything to newest versions?
Sent from my A0001 using Tapatalk
MrMooselover said:
I installed TRWP and rooted my S7 Edge. What happens if I download the new stock rom from sammobile.com and flash it using TWRP or ODIN? Will I loose all apps/settings and will the phone still be rooted?
Click to expand...
Click to collapse
If somebody would like to answer this guy, I'd be the happiest.
I'm wondering the same thing. Though I get by with Titanium Backup for now (even though I don't trust it that much anymore, it just swallowed all my backups when I moved the files through the app, I had to reinstall evything by hand, and I lost most of my SMS/MMS).
Actually you can get OTA updates when you are rooted there is option in xTouchWiz Module when you have Xposed installed that changes the device status from Custom to Official and for me it worked and then i can install the update using flashfire. But i dont know if it works you too
jark99 said:
I don't understand this. Isn't OTA full updates and flashes firmware, ROM and everything to newest versions?
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
OTA is a Over the air package.
Contains just the nessesery code to patch the current firmware.
You cannot flash a OTA, Simple.
What you can do, is what others have advised. Download the full Firmware and flash away.
There is two ways to do this. Flash everything and have the device wipe all data.
Flash the necessary files for odin with a patched csc file (This will avoid any data being wiped)
Second method:
Flashfire.
You can download the whole firmware package from Sammy (Link the guys posted above)
Then use flashfire to flash these packages straight on the device.
You will retain all Data and Settings etc. You can also replace bootloader
and then flash TWRP again after.
(If i have used flashfire since i have had the device. I have updated Dirty (Dirty is when i dont wipe and keep all Data)
I have done this around 5 times, and noticed my device starting to become slow at responding.
Today i installed the latest Firmware with a Full wipe. (Its advisable once in a while)
Iradj said:
Actually you can get OTA updates when you are rooted there is option in xTouchWiz Module when you have Xposed installed that changes the device status from Custom to Official and for me it worked and then i can install the update using flashfire. But i dont know if it works you too
Click to expand...
Click to collapse
Can you explain how you did it i have all installed flashfire, xtouchwiz, ota how do i flash it where is the file?
tonyafc said:
Can you explain how you did it i have all installed flashfire, xtouchwiz, ota how do i flash it where is the file?
Click to expand...
Click to collapse
Its Simple in XTouchWiz go to Security Hacks and then tick the Box "Fake System Status" Now close XTouchWiz and go to Settings and Status, now it should be Official and Thats it. You can download your OTAs but obviously you can't install it, Open Flashfire go to Flash Zip or OTA.... Done.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Your OTAs should be saved in DATA -> FOTA
Iradj said:
Its Simple in XTouchWiz go to Security Hacks and then tick the Box "Fake System Status" Now close XTouchWiz and go to Settings and Status, now it should be Official and Thats it. You can download your OTAs but obviously you can't install it, Open Flashfire go to Flash Zip or OTA.... Done.
Your OTAs should be saved in DATA -> FOTA
Click to expand...
Click to collapse
Thanks for replying done all above couldn't locate the file in data but found it in cache but the file has corupted in brackets?
tonyafc said:
Thanks for replying done all above couldn't locate the file in data but found it in cache but the file has corupted in brackets?
Click to expand...
Click to collapse
Yeah, I tested it myself and there is now chance to flash the update.zip from the fota folder. It did what is recommended: Just flash the whole firmware with the home_csc.
GerasVille said:
Yeah, I tested it myself and there is now chance to flash the update.zip from the fota folder. It did what is recommended: Just flash the whole firmware with the home_csc.
Click to expand...
Click to collapse
I did that with the last update i got it from sammobile but it wiped my phone
tonyafc said:
I did that with the last update i got it from sammobile but it wiped my phone
Click to expand...
Click to collapse
Really? Even with the home_csc file? Did the device ask you for a pin or something or did it just a wipe after flashing?
GerasVille said:
Really? Even with the home_csc file? Did the device ask you for a pin or something or did it just a wipe after flashing?
Click to expand...
Click to collapse
No pin i downloaded file from sammobile and got 6 files using odin i put them all in labelled boxes and it wiped my phone there was another csc file
TWRP (NO ROOT) and Official Firmware with OTA updates possible (S7 EDGE 935FD)
Hey, If I am posting here irrelevant, please guide me to the best Thread where I should post it.
I recently installed Resurrection Remix rom on s7 edge. Them ram was good, however, camera wasn't working with stock rom as well as open camera and candy camera apps. It was just showing blank screen when I open any camera app. I reinstalled the stock rom via Smart Switch.
I require a few solutions:
1. How can I get my camera working with Resurrection Remix? Is there anyone who had the same problem?
2. Can I install TWRP to have custom recovery with official rom? And while having TWRP (without root), would I be able to have OTA?
3. How can I use smart switch backup via any other app or software to get it into my phone (which is installed with custom rom) because custom rom do not catch smart switch.
Thanks!
crack00r said:
When i root my S7 Edge, how to get OTA updates?
Is there any page to download it?
Click to expand...
Click to collapse
Give it a try
https://forum.xda-developers.com/ga...dates-root-t3837898/post77519099#post77519099
Alright.
I had this problem for a while and I figured out how to flash the update without the need to factory reset or change the update script of the update file.
Even if you get the user/release-keys error message. EXAMPLE:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You have to be using the latest lollipop release before updating. That means you have to be on YOG7DAS2K1 before attempting.
This worked out for me. But it might not work for you. I do not believe it can destroy your phone and switch some satellites off, but still, not responsible if it did so.
Requirments:
You have to have TWRP now or you at least have ROOT and any flashing app like flashify.
Download COS 13 update file. here https://www.androidfilehost.com/?fid=24459283995316311
Download the latest CyanogenMod Recovery https://download.cyanogenmod.org/?device=bacon
Download the cm-12.1-YOG7DAS2K1 full ROM [url]https://www.androidfilehost.com/?fid=24369303960686198[/URL]
Guide:
Make sure the update cyanogen recovery option is checked in developer options.
Flash CyanogenMod Recovery downloaded before.
Reboot into it.
Use the update function in CyanogenMod Recovery and choose cm-12.1-YOG7DAS2K1 as the update file. It might take a while.
Now reboot to your phone. When booted and running, reboot to recovery.
Now you are running COS recovery. Update with the incremental.
That is it.
I hope this works out for you.
EXTRA: How to ROOT and have TWRP as a recovery:
Requirements:
A laptop.
Download TWRP and adb drivers on the laptop and the SuperSU and TWRP on your phone
Download Oneplus One TWRP Recovery [url]https://dl.twrp.me/bacon/twrp-3.0.2-0-bacon.img.html[/URL]
Get any adb divers. This one suffice [url]http://forum.xda-developers.com/google-nexus-5/development/adb-fb-apx-driver-universal-naked-t2513339[/URL]
Download the latest SuperSu [url]https://download.chainfire.eu/921/SuperSU/UPDATE-SuperSU-v2.65-20151226141550.zip[/URL]
Guide:
Reboot into bootloader: you can do this in many ways. A simple google search will show you how. Easiest way is to turn the phone off and hold the volume up and power long enough for the phone to boot into bootloader.
Connect your phone to your laptop
Run the adb: I assume you are using windows of course. First put the TWRP .img file in this folder. Hold shift and right click in the folder downloaded above. A 'Open command window here' option will be there. Click it and write in the window
Code:
fastboot boot twrp-3.0.2-0-bacon.img
. A hint: you can just write twrp and hit TAB, it will complete the filename. Or you can rename the downloaded file to just twrp.img
Check your phone, you will be running TWRP temporarily. You now have the option to ROOT only by flashing the SuperSU file downloaded on your phone. If you reboot now you will lose TWRP and get back to the official COS Recovery. If you want TWRP for good flash the TWRP file downloaded on your phone before.
I hope this is easy. It actually is. just follow it step by step.
If you could provide us the guide to root and come back to twrp I would be extremely happy
bisio971 said:
If you could provide us the guide to root and come back to twrp I would be extremely happy
Click to expand...
Click to collapse
fastboot flash latest twrp and flash SuperSU BETA
THANK the post if I deserve
bisio971 said:
If you could provide us the guide to root and come back to twrp I would be extremely happy
Click to expand...
Click to collapse
if you need a guide to root, this means you are not rooted, and if you are not rooted most probably you already have stock recovery, which means you can just install the OTA update without any issues.
bisio971 said:
If you could provide us the guide to root and come back to twrp I would be extremely happy
Click to expand...
Click to collapse
Added as requested. I hope you find it easy.
y2kkingboy said:
Added as requested. I hope you find it easy.
Click to expand...
Click to collapse
Thank you, you made my life easier, but when I tried to run the twrp through fastboot I got an error and I got the solution writing "fastboot boot twrp.img" (after renaming the file).
bisio971 said:
Thank you, you made my life easier, but when I tried to run the twrp through fastboot I got an error and I got the solution writing "fastboot boot twrp.img" (after renaming the file).
Click to expand...
Click to collapse
Yeah. I mad a mistake there. Thank you and glad it helped.
If I do this what happens to my data?? I'm on cm 12. 1.1, rooted & running twrp.
---------- Post added at 12:20 AM ---------- Previous post was at 12:18 AM ----------
Link for cos13 that works with this method?
thinleytsering9 said:
If I do this what happens to my data?? I'm on cm 12. 1.1, rooted & running twrp.
---------- Post added at 12:20 AM ---------- Previous post was at 12:18 AM ----------
Link for cos13 that works with this method?
Click to expand...
Click to collapse
As I stated before you have to be on COS 12.1 YOG7DAS2K1. This method should not format your phone or remove any data as there is no factory reset step.
As for the link they are all over the place now. I used the official one. I'll link it for your convenience.
can anyone please pull the stock recovery from COS 13, not 12. I kinda screwed up while updating and now stuck in bootloop.
Update: The issue is resolved. The issue was because of SuperSu 2.46. Installing the latest TWRP and SuperSu 2.66 fixed it. Marshmallow is now rooted!
Thank you very much! After going back to stock and still not receiving the update for more than a week (well at least it felt like a week, Lol) I decided to flash a full COS 13 zip floating around. Instantly liked the new ROM but it had root/symlink issues only to be resolved when flashing a custom kernel it seems. Not what I really wanted so then I stumbled onto your thread and this technique worked 100%! I was on DAS2K1 (flashed thru a custom recovery) already and had several failed attempts flashing just the incremental outright (thru stock recovery)., but by flashing DAS2K1 thru stock recovery first as you suggest then the incremental seems to do the trick.
I did it all the steps, but my phone doesn't not start. After optimizing aplications I have bootloop at "cyanogen modready".
L.E. I think the problem was one of old aplications. After a clean install everything works.
This is the best thing Oneplus one i ever experience.COS13 give my Oneplus one a new breathe of life .This update better than crap lolipop.No Bug for me until now,only google play service need to update twice in play store,its auto reboot itself twice and wholla,super speed UX.The best thing i ever have.I apply update from CM-12-0-YNG1TAS17L Build LRX22G using this method and it works flawlessly
I don't need to factory reset or wipe cache .
I flash full stock ROM cm-12.1-YOG7DAS2K1 and apply update through CyanogenMod Recovery only and nothing else.
Now my oneplus one is rooted and TWRP install using ADB and its fly.All rooted apps is working together with Adaway.
Thanks Cyanogen team for make this 2 years old flagship killer a beast .
Only thing not satisfied is gone signal and wifi status (connectivity indicator ).I need to swipe down to see my transfer data working (what a bummer ).
Thanks so much for this magical guide (y2kkingboy) Yours truly Oneplus one diehard fan.
I was already on cm-12.1-YOG7DAS2K1, however rooted. So even if I had been offered the OTA it would have failed.
Your guide got me updated, first time with no problems.
6.0.1 is such an improvement on 5.1.1, I tried a couple of other 6.0 roms, however this has by far been the most stable and bug free.
Cheers for the tutorial!
u can also add a trick i saw online i.e to remove lines of code from assets to - in updater file
#sychrome# said:
u can also add a trick i saw online i.e to remove lines of code from assets to - in updater file
Click to expand...
Click to collapse
Can you provide more info? i've always had trouble updating when rooted.
InsaneNutter said:
Can you provide more info? i've always had trouble updating when rooted.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2522762
u can also add a trick i saw online i.e to remove lines of code from assets to - in updater file
Click to expand...
Click to collapse
Can you provide more info? i've always had trouble updating when rooted.
Click to expand...
Click to collapse
I had tried this before and it did not work for me. Kept getting an error saying "the signature file was not a complete file" and therefore it didn't flash. But it may have been editing error on my part. This method works just fine and no need to give up your data either.
Having tried many other ways, I got it done with this instruction.
Thank you!
marxu said:
Having tried many other ways, I got it done with this instruction.
Thank you!
Click to expand...
Click to collapse
Glad I helped.