Hi Guys,
I am using Verizon S5 rooted with Xposed installed along with two modules SwipeBack and Wanam with root rights granted. I am able to go into both modules and configure settings and etc., but nothing happens. The modules are checked off in Xposed.
Anything I missed? Much appreciated.
flyaway718 said:
Hi Guys,
I am using Verizon S5 rooted with Xposed installed along with two modules SwipeBack and Wanam with root rights granted. I am able to go into both modules and configure settings and etc., but nothing happens. The modules are checked off in Xposed.
Anything I missed? Much appreciated.
Click to expand...
Click to collapse
Did you install the xposed framework on the first tab in the program? it won't do anything even if they're enabled if the xposed framework isn't installed. It installs xposedbridge.jar and appprocess.jar i think.
thachosenone said:
Did you install the xposed framework on the first tab in the program? it won't do anything even if they're enabled if the xposed framework isn't installed. It installs xposedbridge.jar and appprocess.jar i think.
Click to expand...
Click to collapse
i'm having the same issues with some modules on moars rom ne5
Related
I cannot get GravityBox 2.9.2 (haven't tried other versions yet) to work on rooted stock 4.2.2. I've seen several posts about users having successfully activated GravityBox, but it seems like most of them are on custom ROMs.
When I try to open GravityBox settings, it just says that the system framework not responding. Other modules I have are working just fine.
Anyone have this issue and found a solution yet?
Gravity box is working fine for me on rooted stock 11a vzw g2. Other modules are working fine also.
Sent from my VS980 4G using xda app-developers app
transient_itch said:
I cannot get GravityBox 2.9.2 (haven't tried other versions yet) to work on rooted stock 4.2.2. I've seen several posts about users having successfully activated GravityBox, but it seems like most of them are on custom ROMs.
When I try to open GravityBox settings, it just says that the system framework not responding. Other modules I have are working just fine.
Anyone have this issue and found a solution yet?
Click to expand...
Click to collapse
So you have exposed framework installed and clicked the install update button?...then installed gravitybox and wen into xposed framework and clicked modules and checked gravitybox....and reboot?.....hope this helps ...these steps should have you working
RubbleTea said:
So you have exposed framework installed and clicked the install update button?...then installed gravitybox and wen into xposed framework and clicked modules and checked gravitybox....and reboot?.....hope this helps ...these steps should have you working
Click to expand...
Click to collapse
Yep I did all of that. Still same issue.
i need unrooted rom because of one app of my provider not working with root... since short it is impossible to use it with rooted devices and i use it every day....
Xposed framework and Rootcloak module may help as an alternative......
All available on XDA......
http://i.imgur.com/rVnFwJM.jpg
keithross39 said:
Xposed framework and Rootcloak module may help as an alternative......
All available on XDA......
http://i.imgur.com/rVnFwJM.jpg
Click to expand...
Click to collapse
i will try it but i have tryed many root hiders and not working at all....
i think because now its working with Microsoft PlayReady DRM?thx
I'm an xda n00b just trying to get the XHaloFloatingWindow working on my S4.
So far I've rooted my phone and created a backup image (saved on my PC), but now I've got to install the Xposed framework. I'm a bit confused after reading the boards though because the older posts say I have to deodex my ROM first, but rovo89's recent posts don't mention this requirement before linking to the installers.
Please let me know: do I need to deodex before installing the Xposed framework on my Sprint S4 5.0.1?
Thanks!
uncleGe said:
I'm an xda n00b just trying to get the XHaloFloatingWindow working on my S4.
So far I've rooted my phone and created a backup image (saved on my PC), but now I've got to install the Xposed framework. I'm a bit confused after reading the boards though because the older posts say I have to deodex my ROM first, but rovo89's recent posts don't mention this requirement before linking to the installers.
Please let me know: do I need to deodex before installing the Xposed framework on my Sprint S4 5.0.1?
Thanks!
Click to expand...
Click to collapse
Yes.
You also need the special TouchWiz xposed version.
Hello, is there a Android 5.0 ROM without many features but compatible with Xposed modules? I am not looking to overclock my Galaxy S4 i9500, I just want some programs to run on my phone, thanks in advance!
Justm2010 said:
Hello, is there a Android 5.0 ROM without many features but compatible with Xposed modules? I am not looking to overclock my Galaxy S4 i9500, I just want some programs to run on my phone, thanks in advance!
Click to expand...
Click to collapse
All ROMs are compatible with Xposed. Developers don't encourage the use.
I'm not sure how helpful this will be, but there are some unofficial Xposed frameworks that work on odexed systems. I have a stock ROM Note 4 (custom kernel) i.e. odexed, and also have Xposed (I use xprivacy, batterymon, SU, GPS spoofer, Flashify, Adaway, and BusyBox with a terminal so to probe various system peculiarities (PIDs, file handles, etc.)).
I can't remember the link for the Xposed framework my phone currently runs, but it was from XDA forums. Maybe it's worth searching for an unofficial framework for an odexed S4.
So as the thread states, I'm looking to bypass the root check for Pokemon go. We all know Pokemon go now uses safetynet to check for rooted configurations. Where my issue lies, is I'm using CM13 a custom ROM on my device. It has root, as well as Xposed Framework. I want to install Magisk but I'm not fully sure if it is compatible with my device at its current settings. Any help guys? (I do apologize if I'm in the wrong section. I'm new here)
Cryptocution said:
So as the thread states, I'm looking to bypass the root check for Pokemon go. We all know Pokemon go now uses safetynet to check for rooted configurations. Where my issue lies, is I'm using CM13 a custom ROM on my device. It has root, as well as Xposed Framework. I want to install Magisk but I'm not fully sure if it is compatible with my device at its current settings. Any help guys? (I do apologize if I'm in the wrong section. I'm new here)
Click to expand...
Click to collapse
it should work as the systemless root is device transparent you will need to do systemless xposed too
Have you had any luck trying to get magisk on CM13? I have not been successful with jasmine yet.
nIkbot said:
Have you had any luck trying to get magisk on CM13? I have not been successful with jasmine yet.
Click to expand...
Click to collapse
Actually, I have. I broke because I wanted to play Pokemon go. It actually does work, you just have to fully unroot, delete xposed, check xbin and bin in /system with es file explorer, reboot to be sure your phone isn't brick. If that works, follow the instructions on the magisk thread I did exactly in that order and its pretty good. But if you play Pokemon go, you'll have to turn off xposed when you install it as safety net detects it.
Hello, I am curious to know if anyone has tried the Xposed Framework on a G7-L01 and if so, what if any issues they have come across?
I've been following Xposed Framework v82-Huawei for EMUI 3.1/4.0 and I'm about ready to jump in and install the framework, but just want to check with other users first
Any advice would be appreciated :good:
Hi, I successfully installed Xposed on my G7 and it is working without issues. Just not getting CM13 installed somehow but at least am on rooted stock version.
frosty76 said:
Hi, I successfully installed Xposed on my G7 and it is working without issues. Just not getting CM13 installed somehow but at least am on rooted stock version.
Click to expand...
Click to collapse
Excellent, held off on mine just till the weekend, but can I ask you, for the G7 did you use the ARM or the ARMx64 zip? I'm thinking the ARM is correct, but might be wrong.
install systemless xposed
ech0 said:
Excellent, held off on mine just till the weekend, but can I ask you, for the G7 did you use the ARM or the ARMx64 zip? I'm thinking the ARM is correct, but might be wrong.
Click to expand...
Click to collapse
Correct, it is ARM, not the 64bit version.
aStRaL_dRaGoN said:
install systemless xposed
Click to expand...
Click to collapse
Had a go with Magisk, v7 went on no problem. I then flashed the modded Xposed and lost root. I had put SuperSU as user app, but was not interested in using the systemless SuperSU and suhide, but by not using them, that possibly led to the root going. Will keep an eye on Magisk though, interesting development.
Restored backup and went with the ARM version of Xposed Framework v86 proper and so far OK, root stayed anyway which was main thing.
I've only tried XToast module, to test and it is not fully working for me. Will try another few modules before I decide if I want to try systemless again.
frosty76 said:
Correct, it is ARM, not the 64bit version.
Click to expand...
Click to collapse
Thanks for confirming, appreciated :good:
Any recomendations for good working Xposed modules for the G7?
Main reason I want to try it, is lack of custom roms for this device, so might as well mod the stock rom to suit myself.
I have Viper4Android, on and working, but looking for a way to automate the selinux enforcing for it through an Xposed module, but any other suggestions are welcome
u want systemless or u want normal root and xposed?
like me im playing pokemongo so i need systemless root and xposed in order to be able to play pokemongo
reply me which one that u want and i will teach u what i know
aStRaL_dRaGoN said:
u want systemless or u want normal root and xposed?
like me im playing pokemongo so i need systemless root and xposed in order to be able to play pokemongo
reply me which one that u want and i will teach u what i know
Click to expand...
Click to collapse
Hey aStRaL_dRaGoN, thanks for the reply and the offer. I went with normal Xposed and normal root in the end and so far all is OK.
I don't play Pokémon Go or have any banking apps that would require me to go fully systemless just yet. I did try it out though and Magisk, went on OK, no problems, the issue arose when I flashed the modded Xposed zip, I lost root then. I can only assume it was because I did not have SuperSU, fully systemless, I had just not made it a system app, I left it as a user app. Maybe some other time though I'll go back to the Magisk route and if I have any problems, I'll ask you, thank you :good: