normally using my droid razr m suddenly locks up and restarts, is there any solution please help
c_v_S said:
normally using my droid razr m suddenly locks up and restarts, is there any solution please help
Click to expand...
Click to collapse
Details? Stock ROM? Rooted? etc.
Have you done anything to lead up to the reboots? Flash anything new... mod any system files? Try to root and unlock? Hard drop to damage any internal components? Water spill? I got a phone off eBay that did this listed as new lol... As well as the reboots everything was foreclosing when it wasn't rebooting... I believe a simple rsd or house of moto would have fixed it but that wasn't an option for me so I just put in a new logic board... I would say flash stock with house of moto or rsd...
Sent from my XT907 using xda app-developers app
Related
This is my bad day . My Droid 2 Global got stuck on M logo when I tried to root and install the new ROM . I have tried alot of SBF from the Droid 2 but it's seem nothing fix my phone. So, anyone can help me with the new SBF for Droid 2 Global
Which SBF did you use? I'm not aware of one being released for the D2G and using the one for the D2 will certainly screw up your phone.
There isn't a SBF for the D2G yet. You should have waited for it before trying anything like this.
If the sbf did work after you sbf you need to:
1. Pull your Battery.
2. Replace battery and power on while holding down the X key.
3. Wait for the android triangle to load.
4. Press the Search key (the magnifying glass)
5. Use down arrow and navigate to wipe data/factory reset and press OK.
6. Reboot phone.
If that doesn't work than you might be SOL.
If you get the M logo and you have a backup. (always try and restore a backup before you SBF)
Pull your battery and place it back in after 5 seconds or so (we just want the phone completely off)
(while completely off) Plug your phone into the wall charger.
Then turn your phone on. If you get the charging screen press power again.
now you should be in clockwork recovery so you can do a restore if you made a backup.
I've used all the sbf that I searched in this forum but it wasn't work. I think there are a different SBF for Droid 2 Global.
hamabucon said:
I've used all the sbf that I searched in this forum but it wasn't work. I think there are a different SBF for Droid 2 Global.
Click to expand...
Click to collapse
I assumed so but I also assumed that if the boot loader hasn't changed one could /theoretically/ flash the 2.3.2 sbf and /possibly/ be okay. I wouldn't recommend any D2 G users to flash ROMs or anything until the SBF specifically for the D2 Global is released. I would suggest rooting and getting a backup made if the user want's to eventually flash ROMs.
newk8600 said:
I assumed so but I also assumed that if the boot loader hasn't changed one could /theoretically/ flash the 2.3.2 sbf and /possibly/ be okay. I wouldn't recommend any D2 G users to flash ROMs or anything until the SBF specifically for the D2 Global is released. I would suggest rooting and getting a backup made if the user want's to eventually flash ROMs.
Click to expand...
Click to collapse
I have tried to flash the 2.3.2 but everything seem wrong and I have the Critical error 0047
hamabucon said:
I have tried to flash the 2.3.2 but everything seem wrong and I have the Critical error 0047
Click to expand...
Click to collapse
Did you make a backup with koush's bootstrapped clockwork recovery? if so you should try and restore it. otherwise you might be out of luck until the sbf drops.
Maybe I'm out of Luck . But is there a chance to update the new ROM using the stock Recovery ? . I saw there are the option apply: update.zip
It will only work if you have the rom signed with moto's keys or it won't get through. That's why we use koush's bootstrapped clockwork. Because it doesn't have signature verification. Well it does but we can toggle it off.
Sent from my DROID2 using XDA App
Can you estimate when the SBF for D2 G release ?
newk8600 said:
If the sbf did work after you sbf you need to:
1. Pull your Battery.
2. Replace battery and power on while holding down the X key.
3. Wait for the android triangle to load.
4. Press the Search key (the magnifying glass)
5. Use down arrow and navigate to wipe data/factory reset and press OK.
6. Reboot phone.
If that doesn't work than you might be SOL.
If you get the M logo and you have a backup. (always try and restore a backup before you SBF)
Pull your battery and place it back in after 5 seconds or so (we just want the phone completely off)
(while completely off) Plug your phone into the wall charger.
Then turn your phone on. If you get the charging screen press power again.
now you should be in clockwork recovery so you can do a restore if you made a backup.
Click to expand...
Click to collapse
I have the same problem with the droid 2, except i mistakenly flashed with the droid 2 global without really thinking about it. I'm stuck at the M logo, and i've tried doing all of the above but i cannot get into clockwork recovery. Any suggestions? if I bricked my phone, how would i go about getting it fixed from verizon?
I remembered that i install the stock ROm deodexed for Droid 2 Global . But why my phone bricked ? Is that the problem from my phone?
dotmike said:
I cannot get into clockwork recovery. Any suggestions? if I bricked my phone, how would i go about getting it fixed from verizon?
Click to expand...
Click to collapse
You should sbf your droid 2 with the 2.3.2 sbf. Search in droid 2 android development section. There are two ways to flash it. One in windows the other in linux. I made a tool so people can use any computer to flash in linux. Search in the android development section for the droid 2 and it's there if you need it. I recommend reading and reading and reading then flash it. You'll be wiser and you'll know each step before you do it. It's not difficult and if you are going to flash ROMs you need to need to know how to sbf.
If your phone boots it's not bricked. And read every post here before trying to return it to verizon. If you have the desire to flash ROMs to your phone you can to the research to fix any mishaps. If after you read every post and you still have no idea or the methods applied haven't worked then you have my permission to take it back to verizon with the excuse that the update messed up your phone. Thanks and happy fixing!
Sent from my DROID2 using XDA App
I have just bought another Droid 2 Global , is that work if I have a nandroid backup from the new one and use for the bricked one ?
newk8600 said:
You should sbf your droid 2 with the 2.3.2 sbf. Search in droid 2 android development section. There are two ways to flash it. One in windows the other in linux. I made a tool so people can use any computer to flash in linux. Search in the android development section for the droid 2 and it's there if you need it. I recommend reading and reading and reading then flash it. You'll be wiser and you'll know each step before you do it. It's not difficult and if you are going to flash ROMs you need to need to know how to sbf.
If your phone boots it's not bricked. And read every post here before trying to return it to verizon. If you have the desire to flash ROMs to your phone you can to the research to fix any mishaps. If after you read every post and you still have no idea or the methods applied haven't worked then you have my permission to take it back to verizon with the excuse that the update messed up your phone. Thanks and happy fixing!
Sent from my DROID2 using XDA App
Click to expand...
Click to collapse
The phone is Droid 2 Global. There is no sbf available for D2G yet. More and more users are getting confused. Please vote in the thread for dedicated section for D2G @XDA!
Sent from my Milestone using Tapatalk
hamabucon said:
I have just bought another Droid 2 Global , is that work if I have a nandroid backup from the new one and use for the bricked one ?
Click to expand...
Click to collapse
You could try, but you need to get into cw recovery on the broken one first...
Sent from my Milestone using Tapatalk
leobg said:
The phone is Droid 2 Global. There is no sbf available for D2G yet. More and more users are getting confused. Please vote in the thread for dedicated section for D2G @XDA!
Sent from my Milestone using Tapatalk
Click to expand...
Click to collapse
I was not commenting to hamabucon I was talking to dotmike who it seems has an Orginal Droid 2 (not global) and the advice is NOT for the Droid 2 Global. I'm sorry if it's confusing he posted in a thread about the D2 G and I was trying to help him where he posted his problem. I have not suggested that there is an Sbf for the D2 G. Sorry for the confusion but if we all read what each post relates to will help.
Sent from my DROID2 using XDA App
, Still wait for my little hopeness
leobg said:
The phone is Droid 2 Global. There is no sbf available for D2G yet. More and more users are getting confused. Please vote in the thread for dedicated section for D2G @XDA!
Sent from my Milestone using Tapatalk
Click to expand...
Click to collapse
newk8600 said:
I was not commenting to hamabucon I was talking to dotmike who it seems has an Orginal Droid 2 (not global) and the advice is NOT for the Droid 2 Global. I'm sorry if it's confusing he posted in a thread about the D2 G and I was trying to help him where he posted his problem. I have not suggested that there is an Sbf for the D2 G. Sorry for the confusion but if we all read what each post relates to will help.
Sent from my DROID2 using XDA App
Click to expand...
Click to collapse
Yes, apologies for taking over a thread with my question, however to newk8600, I didn't know that holding the up key on the keyboard booted into the bootloader! I managed to sbf from there since RSDLite read the phone then.
Apologies for any confusion, and thank you again for the help.
My father inlaw balled up his Droid x and went and bought a new one. Looking at the supposedly bricked phone I can try to manually boot it says
Bootloader
30.04
battery ok
OK to program
Connect USB
Data Cable
Is the phone savable. Please help ! Current phone is HTC incredible running incredibly re-engineered z
Sent from my ADR6300 using XDA App
Yes, if you are at the screen you see, you can sbf (system boot file)to factory original software.
There are is a Windows way and an Ubuntu way to sbf. I prefer the Ubuntu way personally, and I have never used any Linux b4 that.
Search these forums 'SBF Droid X'
I have also found some independant electronic stores willing to do the process.
Sent from my DROID2 using XDA App
i have droid x on ntelos i rooted but didnt change bootstrap flashed a rom and ofcourse bootlooped so i flashed sbf VRZ_MB810_2.3.34_1FF_01.sbf and now it comes up as verizon any ideas how to get back to ntelos..i have searched xda droidlife google and i cant find any kind of answer..the phone was purchased thru ntleos
Personally, I have royally screwed up my Droid X in the past. At one point, RSD Lite could not bring my phone back to life. However, Ubuntu saved my buttocks. Highly recommend using Ubuntu if you need to SBF your phone. Just speaking from experience.
nygbaby91 said:
i have droid x on ntelos i rooted but didnt change bootstrap flashed a rom and ofcourse bootlooped so i flashed sbf VRZ_MB810_2.3.34_1FF_01.sbf and now it comes up as verizon any ideas how to get back to ntelos..i have searched xda droidlife google and i cant find any kind of answer..the phone was purchased thru ntleos
Click to expand...
Click to collapse
I'm pretty sure you're outta luck until someone leaks ntelos SBF file, or.. take it into ntelos and see if they can help you They might.
Hi i just recently bought a motorola droid x. It had 2.1 android on it. So i uploaded the 2.2 spl file thorugh rsdlite. I just found out the bootloader version is 12.03. Now i tried flashing 2.1 and 2.2 both. after it says manually restart the phone. i restart it and it gets stuck on motorola screen. i tried clearing cache and factory reset it keeps getting stuck at the motorola screen. can somone please help me out here :/. Please help asap
Not sure about the bootloader as 12.03 . When I had 2.1 the bootloader was 30.01, then it changed as updates for 2.2 and finally 2.2.1 . Now the bootloader is 30.04 .
Do a little more research before flashing this, but the newest official built for a SBF file is 2.3.340. You can find it by google. This will change your bootloader to 30.04 and bring you up to date.
Good luck.
What OS are you using?
+1 on the bootloader. That is an odd one, unless that phone didn't originate in the U.S. I think the chinese x had a bootloader of 80.something.
I would start here however:
http://1kds.net/SBF-Page.php
Sent from my DROIDX
Well the battery died while i was trying to run it again. And it wont charge so i just used the splice wire trick. Ill get back to u guys on tht one., either way i tried googling the bL but nothing came up
Sent from my HTC Glacier using XDA App
Well upon further research i found out it was a preproduction droid x :/... i can not find the sbf for it anywhere. Can anyone please help me with this? I'd really appreciate it
bump ^ anyone able to help regarding this please?
are you using the full sbf? not system only sbf
I am not positive, but you should still be able to use the 2.3.340 full sbf to get up to date. You just can't use an sbf to go backwards.
Sent from my DROIDX
im downloading the files right now, but i dont think the boot loader gets updated when i try i tried once already but its worth another shot or as many as it takes :/
Full sbf didnt work its a pre-production phone
Sent from my HTC Glacier using XDA App
god i hate this 5 minute anti spam rule...
I know how to RSD, I've done it before... Just not with the RAZR M. And from what I understand, it's called XML now...
I'm looking here http://sbf.droid-developers.org/scorpion_mini_xt907/list.php for XML files, but I don't want to install one that will prevent me from unlocking the bootloader... My RAZR M came with 98.16.1, which I think is 4.1.2.
I would be very grateful if someone would help me, I'm sure if I googled enough I could figure it out, I just really don't know what I'm doing here, first day with the RAZR M. Thank you!
jimmyco2008 said:
I know how to RSD, I've done it before... Just not with the RAZR M. And from what I understand, it's called XML now...
I'm looking here http://sbf.droid-developers.org/scorpion_mini_xt907/list.php for XML files, but I don't want to install one that will prevent me from unlocking the bootloader... My RAZR M came with 98.16.1, which I think is 4.1.2.
I would be very grateful if someone would help me, I'm sure if I googled enough I could figure it out, I just really don't know what I'm doing here, first day with the RAZR M. Thank you!
Click to expand...
Click to collapse
I'm pretty sure the update is .78. However, just unlock the bootloader now, and you'll be safe.
Thank you.
Yes, for anyone that visits this thread, that linked update was the one I needed (98.16.1 I'm guessing since that's what it came with), RSD lite took it and the update worked.
It seemed to hang on flashing system, just give it 5 minutes or so!
Sent from my XT907 using xda app-developers app
Two things to keep in mind, once the phone has been unlocked, it cannot be undone, and once it has been updated to .78, you cannot unlock the boot loader if you did not do so prior to the update. You can't simply RSD back to the older version and unlock it later if you change your mind.
Sent from my Droid Razr M using Tapatalk 4 Beta
Thanks, I knew enough to avoid the 78 update, but I didn't know RSDing didn't relock the boot loader!
Sent from my XT907 using xda app-developers app
Hello all.
I have come into the possession of a broken MB525. The touch screen was completely broken so I sent it in for repairs. They replaced the touch and everything and they even needed to reheat the motherboard and do some work on it in order to get the phone to start since that was cracked as well.
Well the phone is currently working but apparently it is loaded with a 2.3.6 MB526 stock rom, so it basically reads it as a Defy+ which is wrong. The first problem with it would be the restarts. It has moments when it works fluidly and it has moments when it restarts every 30 seconds. Is this due to the damaged board or is this due to the battery? If it's due to the board I'd rather know about it now so I can just take it easy with it.
The second problem is that I can't get the Internal Storage detected. Even if I put it in USB mass storage, I have no access to the internal SD card. Is this normal?
The third problem is that I can't root. SuperOneClick or any other program that I have tried does not work, getting stuck in Shell root step 7. Is this because of the MB526 firmware? If so, how do I flash a MB525 firmware and which one exactly do I flash for Romania, Europe? I'm going to replace it anyway, I just want the phone rooted with CWM and then I'm going to get CM11.
Thanks guys.
Use this app for root http://forum.xda-developers.com/showthread.php?p=37508806
Then install Quarx CM10 Rom it's the most stable with everything working. After this come back here and tell us if you have other problems.
Sent from my MB526 using XDA Premium 4 mobile app
cyrusct82 said:
Use this app for root http://forum.xda-developers.com/showthread.php?p=37508806
Then install Quarx CM10 Rom it's the most stable with everything working. After this come back here and tell us if you have other problems.
Sent from my MB526 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
It won't root like this. Only one of the versions of the above program works and the Gimli exploit just crashes to home screen while the other one doesn't work. I have the MB526 Retail Central Europe 2.3.6 Version. What about my internal storage? Why doesn't it show up?
Luppertazzi said:
It won't root like this. Only one of the versions of the above program works and the Gimli exploit just crashes to home screen while the other one doesn't work. I have the MB526 Retail Central Europe 2.3.6 Version. What about my internal storage? Why doesn't it show up?
Click to expand...
Click to collapse
Try another SBF, Retail Nordic worked well for me.
sbf (dot) droid-developers (dot) org.
leonardo.porro said:
Try another SBF, Retail Nordic worked well for me.
sbf (dot) droid-developers (dot) org.
Click to expand...
Click to collapse
So everything's about the SBF? Will I be able to root with another SBF? What about the other issues?
Luppertazzi said:
Hello all.
I have come into the possession of a broken MB525. The touch screen was completely broken so I sent it in for repairs. They replaced the touch and everything and they even needed to reheat the motherboard and do some work on it in order to get the phone to start since that was cracked as well.
Well the phone is currently working but apparently it is loaded with a 2.3.6 MB526 stock rom, so it basically reads it as a Defy+ which is wrong. The first problem with it would be the restarts. It has moments when it works fluidly and it has moments when it restarts every 30 seconds. Is this due to the damaged board or is this due to the battery? If it's due to the board I'd rather know about it now so I can just take it easy with it.
The second problem is that I can't get the Internal Storage detected. Even if I put it in USB mass storage, I have no access to the internal SD card. Is this normal?
The third problem is that I can't root. SuperOneClick or any other program that I have tried does not work, getting stuck in Shell root step 7. Is this because of the MB526 firmware? If so, how do I flash a MB525 firmware and which one exactly do I flash for Romania, Europe? I'm going to replace it anyway, I just want the phone rooted with CWM and then I'm going to get CM11.
Thanks guys.
Click to expand...
Click to collapse
Use rooted sbf file.
arora.ujjwal said:
Use rooted sbf file.
Click to expand...
Click to collapse
Can you point me towards a good one? I already am on 2.3.6 so can't go back.
Luppertazzi said:
Can you point me towards a good one? I already am on 2.3.6 so can't go back.
Click to expand...
Click to collapse
Here you go http://www.mediafire.com/download/7...U3_4.5.1-134_DFP-231_CEE_ROOTED_No_Signed.rar
Extract the rar and use sbf
It's 2.3.6 and rooted ^-^