A problem with my note 2 -_- - Galaxy Note II General

My note 2 is all working , but several times when i lock it or put it on charge n leave it for a while n try to open it again , it doesn't open n i must take off the battery n put it again , i need an answer please -_-

aboodah said:
My note 2 is all working , but several times when i lock it or put it on charge n leave it for a while n try to open it again , it doesn't open n i must take off the battery n put it again , i need an answer please -_-
Click to expand...
Click to collapse
In my point of view you would need a factory reset. If that won't solve your problem perhaps a clean install..
Let me know after it..
Cheers mate
Sent from my GT-N7105 using Tapatalk

DiogoCV said:
In my point of view you would need a factory reset. If that won't solve your problem perhaps a clean install..
Let me know after it..
Cheers mate
Sent from my GT-N7105 using Tapatalk
Click to expand...
Click to collapse
i did a factory reset twice bro , but when i put some music files or sucha these things , the problem starts i dunno why

What ROM and device variant do you have?
Sent from my GT-N7105 using Tapatalk

DiogoCV said:
What ROM and device variant do you have?
Sent from my GT-N7105 using Tapatalk
Click to expand...
Click to collapse
ROM : 4.4.2 Kitkat
Device variant : N7100

Fresh install and stock rom equals great device.

Related

[Q] Having serious Problem so required to flash Stock ROM

Hello Friends,
Actually since last 8-10 days my galaxy y s5360 is not working. When i switch ON my mobile it just continously blink the Force Close screen and doesn't allow me to do any work.
So i want to flash my stock ROM and again Install the stock ROM. So friends please help me to solve my problem by telling how to flash old stock ROM and install new Stock ROM
Reply ASAP..
Thanks in advance..
http://cleanimport.xda/index.php?THREADs
Buddy go here:
http://forum.xda-developers.com/showthread.php?t=1465800
Now search for ur country firmware package.then flash it.
Flashing instruction are given there.....
LilSasa said:
http://cleanimport.xda/index.php?THREADs
Click to expand...
Click to collapse
Odin will help
@lilsasa Please stop posting random things to complete your 10 posts
Sent from my Galaxy Y - A phone with Small Screen and Big Buttons
tjsgy said:
@lilsasa Please stop posting random things to complete your 10 posts
Sent from my Galaxy Y - A phone with Small Screen and Big Buttons
Click to expand...
Click to collapse
No, I don't post random things. When I first got to XDA, I just went through sections and I didn't need to ask anything.
There are just many lazy people.
Droidlover123 said:
Buddy go here:
http://forum.xda-developers.com/showthread.php?t=1465800
Now search for ur country firmware package.then flash it.
Flashing instruction are given there.....
Click to expand...
Click to collapse
Hey thnx a lt 4 ur kind help....
Saying thanx isnt enough just press it yaar!
Sent from my GT-S6102 using xda premium
BLACKSTAR said:
Saying thanx isnt enough just press it yaar!
Sent from my GT-S6102 using xda premium
Click to expand...
Click to collapse
ohk..????
jus ran out of ma mind to press it..

[Q] Can Chainfire 3D causes your phone to not boot?

I installed Chainfire 3D apk. But im afraid to install it to my system, because it says that "Installing the CF3D driver may cause your device to not boot. In that case you will need to re-flash your firmware, or restore a CWM backup. Are you sure you want to continue?".
Is there someone out there who encountered a problem when installing the CF3D driver?
btw, I tried to search it here, but still nothing.
!..Sent from my awesome phone..!
anyone? please?
!..Sent from my awesome phone..!
Don't worry it will boot without a problem.
I've never ever read a complaint by a galaxy y user claiming CF3D made his galaxy y not able to boot back up after driver installation.
Yes, depending on rom/tweaks, I tried it on my sensation once and I had to reflash my rom.
thanks for the replies.
Btw, my phone is in stock ROM.
So, it won't cause a problem?
Thanks!!
!..Sent from my awesome phone..!
SGYves said:
thanks for the replies.
Btw, my phone is in stock ROM.
So, it won't cause a problem?
Thanks!!
!..Sent from my awesome phone..!
Click to expand...
Click to collapse
Nop there wont be any problem....
Just enjoy hd games
Press thanx if i helped u
Sent from my GT-S5360 using xda app-developers app
SGYves said:
thanks for the replies.
Btw, my phone is in stock ROM.
So, it won't cause a problem?
Thanks!!
!..Sent from my awesome phone..!
Click to expand...
Click to collapse
installing it on stock rom doesnt have any problem...
so install it.....
i installed it on like every custom rons here and it works...
MUFFINS¡¡
Muffin..or muffin u cant see
Im sorry to tell u.....u are MUFFINIZED...
the biggest problem i got just stuck at Y logo.
simply pull out battery,reinsert,and turn it on
Sent by a Schoolar Boy
Question? Better go to [Help Thread] by Deadly
root first ur lovely SGY,,your stock right?
yeah. Im stock.
!..Sent from my awesome phone..!
SGYves said:
yeah. Im stock.
!..Sent from my awesome phone..!
Click to expand...
Click to collapse
Nothing to worry no bricks and all especially if you are running stock - so go ahead :good:
But there are problems like blurry images and all that could crop if you reduce texture quality or change other things to play games but these are easily solved by reverting back those settings so not a biggie
help me i download this chainfire 3d now my mobile wont booting
help me guys :crying: i had downloaded chainfire 3d app and i did install and after that my mobile boot its stuck in logo,its wont switch on ,i tried reinsert battry and aslo swipe factory data but no use :crying: many times i had tried like that but its hang on at logo ,what i do now ? my mobile is a indian brand name is lava iris 504q plz plz help me guys
syed.abdul said:
help me guys :crying: i had downloaded chainfire 3d app and i did install after mobile boot its stuck in logo,its wont switch on ,i tried reinsert battry and aslo swipe factory data but no use :crying: many times i had tried like that but its hang on at logo ,what i do now ? my mobile is a indian brand name is lava iris 504q plz plz help me guys
Click to expand...
Click to collapse
1. Flash stock ROM (DON'T use Odin!).
2. Restore previous Nandroid backup.
3. Bring your phone to the service center.
Sent from my GT-S5300 using Tapatalk 2
thank you for replay bro ,i dont know about flash stock
luqman98 said:
1. Flash stock ROM (DON'T use Odin!).
2. Restore previous Nandroid backup.
3. Bring your phone to the service center.
Sent from my GT-S5300 using Tapatalk 2
Click to expand...
Click to collapse
but bro problem is i dont know abot flash stock plz can you tell me cleary how to do ?? i just rooted my mobile with fomaroot app thats not with pc ,i sucesfully rooted ,after that i downloded chainfire 3D. so plz help me bro
Depending on rom.kernals.tweaks if ur on nenemesis one and stock rom then not cause ur.phone
Shadman0 If I help U Pls Give Thanks
My Work http://forum.xda-developers.com/showthread.php?t=2521867
syed.abdul said:
but bro problem is i dont know abot flash stock plz can you tell me cleary how to do ?? i just rooted my mobile with fomaroot app thats not with pc ,i sucesfully rooted ,after that i downloded chainfire 3D. so plz help me bro
Click to expand...
Click to collapse
Why you don't google it instead asking here?
Sent from my GT-S5300 using Tapatalk 2
shadman0 said:
Depending on rom.kernals.tweaks if ur on nenemesis one and stock rom then not cause ur.phone
Click to expand...
Click to collapse
@shadman0 he told he is using a lava iris 504q phone, not galaxy y. So how will he be able to use nemesis one???? Read properly before posting. You are confusing a lot of people.
@syed.abdul Your phone has android 4.2, that is, jellybean and chainfire 3d is only for android 2.2(froyo) and 2.3(gingerbread).
Check this website : http://iris504qdevelopment.blogspot.in/2013/11/how-to-unbrick-your-phone-iris-504q-and.html
@SGYves Don't use chainfire 3d with ppsspp. It bricked my phone when i tried it. Even one of my friend faced the same problem.
don't worry it will naver brick your take it from me

[Q] My Ideos S7 Slim Bricket help

Bricket my tablet, how to get into recovery mode how to please me ..
what should i take it to service center??
sorry my bad english, I'm from Indonesia
please help me..
Why don'tyou give us more information? .. In what way is broken. We have more way to recover depends on what is broken. You can always flash a stock firmware and have your tablet at factory status.
Sent from my GT-N7100
goodoane said:
Why don'tyou give us more information? .. In what way is broken. We have more way to recover depends on what is broken. You can always flash a stock firmware and have your tablet at factory status.
Sent from my GT-N7100
Click to expand...
Click to collapse
at first i install its tablet customrom CM10 paranoid, and I'm trying to compile the script cameranya, when completed and I rebooted, suddenly bootloop I do not know the combination to the recovery and cwm.
thank's
sorry my bad english
I've been doing it this way but the result is the same still can not work
link : http://forum.xda-developers.com/showthread.php?t=1043349
menu + green key + power is for fat7 or search for QtADB install in windows and under tools you can boot in recovery if tablet is seen on your PC.
Sent from my S7
My tablet ideos s7 slim not ideos s7..
BANOUNDROID said:
My tablet ideos s7 slim not ideos s7..
Click to expand...
Click to collapse
I see... you wanted to compile something for the tablet, but you do not know the basics how to get out of trouble..?? alright!
JotaMG said:
I see... you wanted to compile something for the tablet, but you do not know the basics how to get out of trouble..?? alright!
Click to expand...
Click to collapse
yes indeed I try to compile a script for my slim Ideos S7 tablet, and is there a way out other than taken to the service center ..:crying::crying:
BANOUNDROID said:
Bricket my tablet, how to get into recovery mode how to please me ..
what should i take it to service center??
sorry my bad english, I'm from Indonesia
Click to expand...
Click to collapse
This is what I did when I bricked.
http://bijopaul.blogspot.in/2011/12/bricking-and-unbricking-my-ideos-s7.html
It is OK if you have no time to hit thanks button
Sent from my Nexus 4 using xda app-developers app
ddz334 said:
This is what I did when I bricked.
http://bijopaul.blogspot.in/2011/12/bricking-and-unbricking-my-ideos-s7.html
It is OK if you have no time to hit thanks button
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
That way I have done but still failed.. is there another way, besides brought to the service center ..
BANOUNDROID said:
That way I have done but still failed.. is there another way, besides brought to the service center ..
Click to expand...
Click to collapse
Have you searched around on android tablets forum. They have more content on slim one. I am 90% sure you can solve this problem yourself as long as there is no hardware error.
It's OK if you have no time to hit thanks button
Sent from my Nexus 4 using xda app-developers app
ok I will try again to learn step by step ..
thanks for the help
friend my tablet bricked..
help please..

[Q] any fix for auto reboot ??

hii
i have the last firmware and the problem not fix ..my device suddenly reboot i don't know .. i try to make full wipe and flash stock room again and the same problem ... please can you help me :cyclops:
my device model : i9500
UP
Did u wipe cache too when u reflashed the rom?
yas
altajer67 said:
yas
Click to expand...
Click to collapse
If you power up the phone U will see a Samsung LOGO, when ur phone is restarting? please give me more info.
(At home im doing S4 I9505 want to know everythin about this model)
Thanks.
AvelonTs said:
Did u wipe cache too when u reflashed the rom?
Click to expand...
Click to collapse
exprxp said:
If you power up the phone U will see a Samsung LOGO, when ur phone is restarting? please give me more info.
(At home im doing S4 I9505 want to know everythin about this model)
Thanks.
Click to expand...
Click to collapse
it work very good and i can use all the app .. but suddenly when i use an app like Facebook app it restart suddenly ... maybe i have fix it by use task killer ... i will see if it work

Any tester to try one untested rom?

Hi, I'm moludo, one of devs from nuclearom. I have one rom to this device, but I can't to test it because I don't have the device. I don't know if it boots... I hope someone can help me.. If you want to try it, just tell me and I send you a link.
Sent from my A0001 using Tapatalk
@logosA
and where can I find, rom, what gapps do you need, SU or magisk needed? Any more information?
It's built with su. I'm uploading the rom... In a few minutes I put the link. And more information....if boots.. It's nuclear...
http://nuclearom.com/download/nuclearom-v1-official7-1-2-n7100-20170517-1507-zip/
Sent from my A0001 using Tapatalk
i just want to say thank you really !
weather it boots or not .. it is working or not ...has bugs or not .
thank u for providing this beautiful room for our community and for free
(sorry for my english)
And install the romnuclear rom goes very well sound radio sim bluethoo works very well
Ohhh... Nice ee... I'm gonna open a official thread.. Thanks people!!
Sent from my A0001 using Tapatalk
iskanderalex222 said:
i just want to say thank you really !
weather it boots or not .. it is working or not ...has bugs or not .
thank u for providing this beautiful room for our community and for free
(sorry for my english)
Click to expand...
Click to collapse
Don't worry about your English, I'm from bilbao.. I understand you very well
Sent from my A0001 using Tapatalk
Tested for few days, everything very well. Perfect rom.
Rom is very good,saw this thread just now, using it for the past 2 hrs no issues
moludo said:
Don't worry about your English, I'm from bilbao.. I understand you very well
Click to expand...
Click to collapse
Sir I have been using this rom for quite some time
It's wonderful...
Full substratum support, no issues whatsoever
I have one bug
MTP is working but is buggy...
After flashing my rom I copied my entire 30gb SD card to my PC using the phone...it worked...
No issues .but now it doesn't detect my phone...
After copying the entire thing...I removed it...
When I put it back it stopped working ..
I reinstalled drivers
Restarted both my phone and PC numerous times...
Changed settings in developer settings...
However file transfer via the recovery works...
Wonderful rom
Thanks a lot
Update 1
On my computer I went to device manager and noticed that note 2 was unable to start..seems it was a problem with my computer and not with the rom
I uninstalled the driver and let it reinstall automatically with a restart and it seems to work now..
So even mtp works...
Wonderful Ron..looking forward to the original thread
....
Thanks for this great ROM,
where is the official thread ? @moludo
Edit : - Got it
This thread can request any rom right??
xress7 said:
This thread can request any rom right??
Click to expand...
Click to collapse
What?...i dont understand you
Sent from my A0001 using Tapatalk
nothing
xress7 said:
This thread can request any rom? Is that right. Because I wanted crdroid rom. If you do sir.
Click to expand...
Click to collapse
Noooooo
This thread is closed now...
The Dev of the rom nucleaROM didn't have a note 2 and was kind enough to build one of the best note 2 roms....
And asked if anyone could test it....
There is an official thread now...
Please , one admin...can close this thread??? Thanks
Sent from my A0001 using Tapatalk
@sawdoctor
Mod Edit
Thread closed at the request of the [OP]
malybru
Senior Moderator

Categories

Resources