Note 3 softbricked ! Totally depressed ;( . - Galaxy Note 3 Q&A, Help & Troubleshooting

[EDIT] : softbrick has been fixed but now I have Baseband UNKNOWN and IMEI NULL
currently on stock 4.4.2 Poland.
So I have a SM-9005 note 3. Just recently bought it. Came with 4.3 stock. I decided to jump on the custom rom bandwagon (for which I feel like killing myself). Anyways it shows the "firmware upgrade encountered an issue screen" .
Here is what I did:
1) rooted the stock 4.3
2) tried installing CWM which probably tripped my knox and now I have 0x01
3) I wanted to install the X-NOTE 4.4.2 build rom
4) Came to know that official 4.4.2 update is required to use Xnote 4.4.2 rom
5) Followed this thread -> http://forum.xda-developers.com/showthread.php?t=2608178
6) Tried to flash the stock poland 4.4.2 fw using odin .
7) Got -> invalid exr4 image !!
Now , I'm not sure if the bootloader has been updated to 4.4.2 . I think I screwed up after this:
Managed to get CWM Recovery running. I tried to flash the X-Note 4.4.2 zip thinking that the bootloader may have updated to 4.4.2 in the previous failed flash. The process stopped half-way and I got back the CWM recovery scree. So it did not work.
Now the odin mode shows the following:
PRODUCT NAME : SM-N9005
CURRENT BINARY : Custom
REACTIVATION LOCK : OFF
KNOX KERNEL LOCK : 0X0
KNOX WARRANTY VOID : 0X1
I can access CWM recovery. I have no idea how to proceed . Please help :crying: . Currently I'm downloading the X-Note jellybean version. Will try to flash that via recovery . Will that be fine

akshayarajdayal said:
So I have a SM-9005 note 3. Just recently bought it. Came with 4.3 stock. I decided to jump on the custom rom bandwagon (for which I feel like killing myself). Anyways it shows the "firmware upgrade encountered an issue screen" .
Here is what I did:
1) rooted the stock 4.3
2) tried installing CWM which probably tripped my knox and now I have 0x01
3) I wanted to install the X-NOTE 4.4.2 build rom
4) Came to know that official 4.4.2 update is required to use Xnote 4.4.2 rom
5) Followed this thread -> http://forum.xda-developers.com/showthread.php?t=2608178
6) Tried to flash the stock poland 4.4.2 fw using odin .
7) Got -> invalid exr4 image !!
Now , I'm not sure if the bootloader has been updated to 4.4.2 . I think I screwed up after this:
Managed to get CWM Recovery running. I tried to flash the X-Note 4.4.2 zip thinking that the bootloader may have updated to 4.4.2 in the previous failed flash. The process stopped half-way and I got back the CWM recovery scree. So it did not work.
Now the odin mode shows the following:
PRODUCT NAME : SM-N9005
CURRENT BINARY : Custom
REACTIVATION LOCK : OFF
KNOX KERNEL LOCK : 0X0
KNOX WARRANTY VOID : 0X1
I can access CWM recovery. I have no idea how to proceed . Please help :crying: . Currently I'm downloading the X-Note jellybean version. Will try to flash that via recovery . Will that be fine
Click to expand...
Click to collapse
You can certainly try it, it's actually very difficult to hard brick any device.
Soft-bricked my ex-device (a S4) so many times I can't count them anymore. You've got Odin, so worry not!
My advice: go back to full stock 4.3, update like a normal person would to 4.4, then do like a normal XDA member and root it, and go from there.

akshayarajdayal said:
So I have a SM-9005 note 3. Just recently bought it. Came with 4.3 stock. I decided to jump on the custom rom bandwagon (for which I feel like killing myself). Anyways it shows the "firmware upgrade encountered an issue screen" .
Here is what I did:
1) rooted the stock 4.3
2) tried installing CWM which probably tripped my knox and now I have 0x01
3) I wanted to install the X-NOTE 4.4.2 build rom
4) Came to know that official 4.4.2 update is required to use Xnote 4.4.2 rom
5) Followed this thread -> http://forum.xda-developers.com/showthread.php?t=2608178
6) Tried to flash the stock poland 4.4.2 fw using odin .
7) Got -> invalid exr4 image !!
Now , I'm not sure if the bootloader has been updated to 4.4.2 . I think I screwed up after this:
Managed to get CWM Recovery running. I tried to flash the X-Note 4.4.2 zip thinking that the bootloader may have updated to 4.4.2 in the previous failed flash. The process stopped half-way and I got back the CWM recovery scree. So it did not work.
Now the odin mode shows the following:
PRODUCT NAME : SM-N9005
CURRENT BINARY : Custom
REACTIVATION LOCK : OFF
KNOX KERNEL LOCK : 0X0
KNOX WARRANTY VOID : 0X1
I can access CWM recovery. I have no idea how to proceed . Please help :crying: . Currently I'm downloading the X-Note jellybean version. Will try to flash that via recovery . Will that be fine
Click to expand...
Click to collapse
Is your Note 3 from Hong Kong?
If it is 32GB, try the second link in my signature.

FeralFire said:
Is your Note 3 from Hong Kong?
If it is 32GB, try the second link in my signature.
Click to expand...
Click to collapse
The funny part is that how do I know its from hong kong ? UPDATE: Managed to boot up CM 11

akshayarajdayal said:
The funny part is that how do I know its from hong kong ? UPDATE: Managed to boot up CM 11
Click to expand...
Click to collapse
Well, if you bought it in Hong Kong, it might give you a clue.
Anyway, is your device a 32 GB varient?
Also, is CM working fine?
What bootloader do you have?

Take a look at my post from a few days ago, it should fix it.
edit/ Just noticed there is new version out, so you can try that one.

FeralFire said:
Well, if you bought it in Hong Kong, it might give you a clue.
Anyway, is your device a 32 GB varient?
Also, is CM working fine?
What bootloader do you have?
Click to expand...
Click to collapse
Phone Info app from Samsung tells me that the device is Made in China.
Bootloader Version: N9005ZHUDMK1
Baseband Version : N9005ZHUDMJ9
Original CSC Code: XSI
CM11 is working without any problems so far. Google apps and downloading also works.
My device is the 32gigs version.

Also one more thing : i totally do not understand why X-NOTE 4.4.2 kitkat version is not starting up. I'm stuck on the samsung logo screen after installing the ROM from CWM recovery. Also, only the JellyBean version of CWM works and not the KitKat version. Does it have something to do with it. Anyways I installed TWRP but still failed to boot up X-Note 4.4.2 version. I am so badly missing the Touch Wiz features ... :crying:

X-Note Jelly Bean works !! I confer that my Bootloader is still 4.3 . Now how do I go about upgrading safely to Kitkat ? I have the Hong Kong version I think .

akshayarajdayal said:
X-Note Jelly Bean works !! I confer that my Bootloader is still 4.3 . Now how do I go about upgrading safely to Kitkat ? I have the Hong Kong version I think .
Click to expand...
Click to collapse
Follow the instructions on this thread by FeralFire.

hey_joe said:
Follow the instructions on this thread by FeralFire.
Click to expand...
Click to collapse
Already tried that. It does not work for me. Still get the 'invalid ext4 image' error.

akshayarajdayal said:
Already tried that. It does not work for me. Still get the 'invalid ext4 image' error.
Click to expand...
Click to collapse
The ZH baseband is from Hong Kong only.
And MK1 is Jellybean.
At which step do you get the invalid ext4 image error while following my instructions?

FeralFire said:
The ZH baseband is from Hong Kong only.
And MK1 is Jellybean.
At which step do you get the invalid ext4 image error while following my instructions?
Click to expand...
Click to collapse
While doing all the four files together. Errors while flashing system.

akshayarajdayal said:
While doing all the four files together. Errors while flashing system.
Click to expand...
Click to collapse
I think I might have been doing a stupid thing here. The 4.4.2 kitkat i was trying to flash is from here-> http://forum.xda-developers.com/showthread.php?t=2608178 . Is it the wrong one?

SOLVED : For those with the Hong Kong version , do not use the odin version mentioned here -> http://www.youtube.com/watch?v=WXTzqhUrzw0
Thanks for your help people

akshayarajdayal said:
SOLVED : For those with the Hong Kong version , do not use the odin version mentioned here -> http://www.youtube.com/watch?v=WXTzqhUrzw0
Thanks for your help people
Click to expand...
Click to collapse
SIM NOT WORKING !! help !

akshayarajdayal said:
SIM NOT WORKING !! help !
Click to expand...
Click to collapse
So now the Baseband is UNKNOWN and IMIE is blank. What now ??

Someone please someone ... help ! :crying:

And I do not have the EFS backup . I do have the twrp backup while I was on jelly bean though. Don't think that included efs .

Bootloader Ver: N9005XXUENA6
Baseband Version : Blank
PDA Version : N9005XXUENA6
CSC Version: N9005OXXENA5

Related

Solution for soft-bricked N9005 after flashing Hong Kong's TGY firmware

I am posting this to help people who ran across the same problem I did the past 24 hours, which drove me crazy and it was quite difficult to find any info on it.
I bought my N9005 on eBay from a Hong Kong seller. I just updated it with Kies and noticed that sammobile.com has a newer MJ8 firmware, so I figured I'd just download it and flash it via Odin.
Kies shows my mobile as XME (Malaysia region), but I guessed it should work just fine, and boy was I wrong.
Moments after trying to flash it, it failed, but it did manage to flash the beginning of the firmware, which was the new MJ bootloader. That newer bootloader does not allow any other firmware with older bootloader be flashed on the phone. Not even Kies's emergency recovery was able to revive my phone which was stuck in emergency download mode.
When trying to flash I got all sorts of errors, such as:
invalid ext4 image
and
CHECK FAIL : fused : 2 , Binary : 1. (when trying to install the older XME Malaysian Firmware on top of the new bootloader)
To make a very long story short, after almost giving up and start waiting for a Malaysian firmware with the new bootloader to be released, I ran across the UK MJ6 BTU rom which does have the new bootloader too and decided to try flashing it. To my amazement - this worked and my phone is back to life! phewwwww!
This is a download link to the BTU MJ6 firmware:
http://www.hotfile.com/dl/252753467/b379b8f/N9005XXUDMJ6_N9005OXADMJ4_BTU.zip.html
Hope this helps others!
P.S. If this information helped you, please click the "THANKS" button below. It's free of charge.
doclucas said:
I am posting this to help people who ran across the same problem I did the past 24 hours, which drove me crazy and it was quite difficult to find any info on it.
I bought my N9005 on eBay from a Hong Kong seller. I just updated it with Kies and noticed that sammobile.com has a newer MJ8 firmware, so I figured I'd just download it and flash it via Odin.
Kies shows my mobile as XME (Malaysia region), but I guessed it should work just fine, and boy was I wrong.
Moments after trying to flash it, it failed, but it did manage to flash the beginning of the firmware, which was the new MJ bootloader. That newer bootloader does not allow any other firmware with older bootloader be flashed on the phone. Not even Kies's emergency recovery was able to revive my phone which was stuck in emergency download mode.
When trying to flash I got all sorts of errors, such as:
invalid ext4 image
and
CHECK FAIL : fused : 2 , Binary : 1. (when trying to install the older XME Malaysian Firmware on top of the new bootloader)
To make a very long story short, after almost giving up and start waiting for a Malaysian firmware with the new bootloader to be released, I ran across the UK MJ6 BTU rom which does have the new bootloader too and decided to try flashing it. To my amazement - this worked and my phone is back to life! phewwwww!
This is a download link to the BTU MJ6 firmware:
http://www.hotfile.com/dl/252753467/b379b8f/N9005XXUDMJ6_N9005OXADMJ4_BTU.zip.html
Hope this helps others!
P.S. If this information helped you, please click the "THANKS" button below. It's free of charge.
Click to expand...
Click to collapse
Thanks buddy for helping me, got me up and running again :good:
You're welcome, mate!
Softbrick
Thank you thank you thank you thank you .
I always liked Hong Kong roms on note one and two and I thought I can continue the tradition .
Softbricked it , and no solution anywhere . I installed this and voila . Back in business . I also installed MJ7 on top now all is good .
Have I said thank you ?
Well thank you !
budalica said:
Thank you thank you thank you thank you .
Have I said thank you ?
Well thank you !
Click to expand...
Click to collapse
You're welcome. Did you press the "Thank you" button?
Thanks a lot. Without your post, my phone will still be bricked.
hh
That day! ! Me too
Useful info, I'm sure this will be of use in many situations.
Thankyou.
Sent from my GT-I9100 using Tapatalk 4
uscool said:
Thanks buddy for helping me, got me up and running again :good:
Click to expand...
Click to collapse
could someone please upload that firmware again on some other hoster? because hostfile isnt working anymore. couldnt find the file on any other server by myself.
lalahamid said:
could someone please upload that firmware again on some other hoster? because hostfile isnt working anymore. couldnt find the file on any other server by myself.
Click to expand...
Click to collapse
Here is the newer version from UK BTU: N9005XXUDMJ7_N9005OXADMJ4_BTU.zip
http://terafile.co/29f621508415
doclucas said:
I am posting this to help people who ran across the same problem I did the past 24 hours, which drove me crazy and it was quite difficult to find any info on it.
I bought my N9005 on eBay from a Hong Kong seller. I just updated it with Kies and noticed that sammobile.com has a newer MJ8 firmware, so I figured I'd just download it and flash it via Odin.
Kies shows my mobile as XME (Malaysia region), but I guessed it should work just fine, and boy was I wrong.
Moments after trying to flash it, it failed, but it did manage to flash the beginning of the firmware, which was the new MJ bootloader. That newer bootloader does not allow any other firmware with older bootloader be flashed on the phone. Not even Kies's emergency recovery was able to revive my phone which was stuck in emergency download mode.
When trying to flash I got all sorts of errors, such as:
invalid ext4 image
and
CHECK FAIL : fused : 2 , Binary : 1. (when trying to install the older XME Malaysian Firmware on top of the new bootloader)
To make a very long story short, after almost giving up and start waiting for a Malaysian firmware with the new bootloader to be released, I ran across the UK MJ6 BTU rom which does have the new bootloader too and decided to try flashing it. To my amazement - this worked and my phone is back to life! phewwwww!
This is a download link to the BTU MJ6 firmware:
http://www.hotfile.com/dl/252753467/b379b8f/N9005XXUDMJ6_N9005OXADMJ4_BTU.zip.html
Hope this helps others!
P.S. If this information helped you, please click the "THANKS" button below. It's free of charge.
Click to expand...
Click to collapse
my brick story in short is------ brought note 3 sm-n9005 from ebay from a Hong Kong based seller. pics of ap, cp and csc are attached. rooted with chainfire's and installed cwm6 by chenglu. A few days back, flashed bobcat rom version 2(mj7) and later 3( mk2 ) without problems. Was looking for different themes .yesterday flashed balckchrome from s4 forum that also went smooth. Unfortunatly flashed another theme for s4 which was not meant for andriod version 4.3. Pretty stupid .went into bootloop. Had nandroid backup tried to restore but couldn't.
Flashed another rom mk2 from cwm. again bootloop .took the odin route and flashed stock deodesk mj7 by Djembey from this thread.
http://forum.xda-developers.com/show....php?t=2461929
Failed again. Then downloaded latest mk2 from sammobile website. The same error (invalid ext4 img) in short failed on all ccounts. Have run out of options. The last thing in mind is to wait for some new bootloader after mk2 which might rescue me as mentioned in this thread that new bootloaders might help... Any guidance will be appreciated. Thanks
@pyarajaani
Try this:
1) Get X-Note v6 custom rom.
2) Use Odin to install CWM recovery.
3) boot the phone into CWM recovery and copy the X-NOTE rom (MK2 based) to your phone or card.
4) Do a complete wipe/factory-reset from CWM
5) Install the X-NOTE rom from CWM
And let me know how it went
doclucas said:
@pyarajaani
Try this:
1) Get X-Note v6 custom rom.
2) Use Odin to install CWM recovery.
3) boot the phone into CWM recovery and copy the X-NOTE rom (MK2 based) to your phone or card.
4) Do a complete wipe/factory-reset from CWM
5) Install the X-NOTE rom from CWM
And let me know how it went
Click to expand...
Click to collapse
Why did you suggest X-Note but not another ROM?
3 reasons:
- It's MK2 based
- I am using it
- It's excellent
And besides, if the method I suggested works, he can always replace a ROM later on if he wishes.
doclucas said:
3 reasons:
- It's MK2 based
- I am using it
- It's excellent
And besides, if the method I suggested works, he can always
replace a ROM later on if he wishes.
Click to expand...
Click to collapse
Thanks for the suggestion. ..tried twice with both stock n Civato kernels.. didn't go beyond Samsung logo screen....With Civato there appears some error above the logo...pics i m attaching. .Thanks again.
doclucas said:
3 reasons:
- It's MK2 based
- I am using it
- It's excellent
And besides, if the method I suggested works, he can always replace a ROM later on if he wishes.
Click to expand...
Click to collapse
Nope, I didnt mean what is the best rom to use.
The problem is that how to bypass the bootloop issue.
pyarajaani said:
Thanks for the suggestion. ..tried twice with both stock n Civato kernels.. didn't go beyond Samsung logo screen....With Civato there appears some error above the logo...pics i m attaching. .Thanks again.
Click to expand...
Click to collapse
No need to mess with kernels.
Were u able to install cwm via odin and then boot into cwm?
doclucas said:
No need to mess with kernels.
Were u able to install cwm via odin and then boot into cwm?
Click to expand...
Click to collapse
yes...I did that n installed X note rom from cwm. BUT I suspect that cwm is not fully functional. Why I m saying this is that I have a nandroid backup of bobcat mj7 rom...which cwm isn't able to detect even. ..nevertheless. .cwm is installed.
1) Which CWM version do you have installed?
2) Did you do a full wipe/factory-reset?
3) Did you try also advanced formatting (of system partition together with the full wipe) and then install the ROM?
4) Did you try all the above with the latest TWRP recovery instead of CWM?
http://forum.xda-developers.com/showthread.php?t=2467255
Try to flash this file by cwm first and then flash any rom after you want
https://www.dropbox.com/s/bibytggk2m8npw8/Brick_Loop_FIX_Fix.zip
Sent from my SM-N9005 using Tapatalk

[Q] Bricked SM-N9005

Hi Guys
Ive bricked my phone I think.
Long story short I flashed a stock ROM of 4.4.2 I believed would work on my SM-N9005 and it failed with the ext4 image error in odin.
I then tried to install the latest CWM which wanted to attempt to root my device. When the device rebooted it brought me to a samsung page advising the device needed restored to factory settings which continually loops.
Now I have tried to put a stock firmware back on the device but it is giving me error
SW REV CHECK FAIL : [aboot]Fused 3 > Binary 2
Any advice or help would be great as I'm now really unsure what to do.
Thanks
Richie
richie1888 said:
Hi Guys
Ive bricked my phone I think.
Long story short I flashed a stock ROM of 4.4.2 I believed would work on my SM-N9005 and it failed with the ext4 image error in odin.
I then tried to install the latest CWM which wanted to attempt to root my device. When the device rebooted it brought me to a samsung page advising the device needed restored to factory settings which continually loops.
Now I have tried to put a stock firmware back on the device but it is giving me error
SW REV CHECK FAIL : [aboot]Fused 3 > Binary 2
Any advice or help would be great as I'm now really unsure what to do.
Thanks
Richie
Click to expand...
Click to collapse
Did u turn Reactivation off?
I hop u r not trying to put 4.3 stock rom back.
Sent from my SM-N9005 using xda app-developers app
Flash stock 4.4 firmware from your carrier or if not available yet check in the general section which is flash-friendly release for your phone.
richie1888 said:
Hi Guys
Ive bricked my phone I think.
Long story short I flashed a stock ROM of 4.4.2 I believed would work on my SM-N9005 and it failed with the ext4 image error in odin.
I then tried to install the latest CWM which wanted to attempt to root my device. When the device rebooted it brought me to a samsung page advising the device needed restored to factory settings which continually loops.
Now I have tried to put a stock firmware back on the device but it is giving me error
SW REV CHECK FAIL : [aboot]Fused 3 > Binary 2
Any advice or help would be great as I'm now really unsure what to do.
Thanks
Richie
Click to expand...
Click to collapse
In all topics of forum the same issue, people dont understand this
SW REV CHECK FAIL : [aboot]Fused 3 > Binary 2
This means you trying to downgrade your phone
FUSED 3 = you have 4.4 installed already
Binary 2 = this means you trying to put 4.3 SW
exprxp said:
In all topics of forum the same issue, people dont understand this
SW REV CHECK FAIL : [aboot]Fused 3 > Binary 2
This means you trying to downgrade your phone
FUSED 3 = you have 4.4 installed already
Binary 2 = this means you trying to put 4.3 SW
Click to expand...
Click to collapse
ah I see I tried to flash this onto the phone initially which caused the problem
3IE-N9005XXUENA6-20140218154049
can someone elaborate on how to tell which is a flash friendly version for the phone ?
the phone is from Vodafone in the UK if that helps.
richie1888 said:
ah I see I tried to flash this onto the phone initially which caused the problem
3IE-N9005XXUENA6-20140218154049
can someone elaborate on how to tell which is a flash friendly version for the phone ?
the phone is from Vodafone in the UK if that helps.
Click to expand...
Click to collapse
3IE-N9005XXUENA6-20140218154049 4.3
http://samsung-updates.com/device/?id=SM-N9005 here you have to find 4.4 SW
exprxp said:
3IE-N9005XXUENA6-20140218154049 4.3
http://samsung-updates.com/device/?id=SM-N9005 here you have to find 4.4 SW
Click to expand...
Click to collapse
is there any restriction on which 4.4 firmware I use ?
I'm currently downloading N9005XXUDMJ7_N9005OXADMJ4_BTU
richie1888 said:
is there any restriction on which 4.4 firmware I use ?
I'm currently downloading N9005XXUDMJ7_N9005OXADMJ4_BTU
Click to expand...
Click to collapse
NA6 is 4.4, if u have international sm-n 9005 download from below link latest poland firmware NB3, what u r downloading is 4.3
http://www.sammobile.com/firmwares/3/?download=25440
jdomadia said:
NA6 is 4.4, if u have international sm-n 9005 download from below link latest poland firmware NB3, what u r downloading is 4.3
http://www.sammobile.com/firmwares/3/?download=25440
Click to expand...
Click to collapse
thanks for the help I know have a polish rom on the device so ive made progress.
I know tried to flash n900s-cwm-recovery-6.0.4.7-kk(0125).tar which tells me the device is not rooted and asked do I want to attempt to root.
I select the return key and the phone reboots and goes back to the stock polish rom.
Any ideas how to flash a custom rom onto the device now. Sorry for the questions been working on this with no success
richie1888 said:
thanks for the help I know have a polish rom on the device so ive made progress.
I know tried to flash n900s-cwm-recovery-6.0.4.7-kk(0125).tar which tells me the device is not rooted and asked do I want to attempt to root.
I select the return key and the phone reboots and goes back to the stock polish rom.
Any ideas how to flash a custom rom onto the device now. Sorry for the questions been working on this with no success
Click to expand...
Click to collapse
Thanks to all involved I am now running Omega KK Rom.
This was a major pain just glad its sorted.

(Help)(Q) Downgrade Lollipop To Kitkat

can we downgrade safely 5.0.1 Lollipop to Kitkat 4.4.2 ???
model - S4 I9506 LTA
if any1 know it then plz share it step by setp....
bcoz i m noob and as far as i know that downgrading is very risky ?
edit
cant be bothered
DSA said:
edit
cant be bothered
Click to expand...
Click to collapse
please give me solution ??
Take a 4.4.2 package unpack it and remove bootloaders, then repack and test.
You can opposedly to SGY firmwares (s5360) open S4 firmwares with Winrar / 7-Zip.
Killnolife said:
Take a 4.4.2 package unpack it and remove bootloaders, then repack and test.
You can opposedly to SGY firmwares (s5360) open S4 firmwares with Winrar / 7-Zip.
Click to expand...
Click to collapse
Thanks for reply.... but it is safe to repack the firmware? and flash after repack?
sorry for ask but some users said there is IMEI null or wifi problem after downgrading? ? is it right?
I m little bit confused. ... if anything goes wrong... my mom kill me ; )
C00l.vishu.ar0ra said:
Thanks for reply.... but it is safe to repack the firmware? and flash after repack?
sorry for ask but some users said there is IMEI null or wifi problem after downgrading? ? is it right?
I m little bit confused. ... if anything goes wrong... my mom kill me ; )
Click to expand...
Click to collapse
User who say that are user who don't even care about their country code nor their CSC
If your CSC is XEF then you have to flash a non-knox 4.4.2 XEF ROM, if wifi/IMEI is null it's most likely a MODEM mismatch.
Just reflash the modem by using Odin3's CP section :good:
EDIT :
Or you may just try Mobile Odin Pro, for a buck it downgrades the phone a simple way.
imei null after downgrading to kitkat on GT-I9500
C00l.vishu.ar0ra said:
can we downgrade safely 5.0.1 Lollipop to Kitkat 4.4.2 ???
model - S4 I9506 LTA
if any1 know it then plz share it step by setp....
bcoz i m noob and as far as i know that downgrading is very risky ?
Click to expand...
Click to collapse
I first rooted and installed SUPERSU on my device with lollipop 5.0.1 to get x mode games. Since xmodgames doesn't support lollipop currently I decided to downgrade my Samsung GT-I9500 from lollipop 5.0.1 to Kit Kat via ODIN after doing a complete wipe via philz_touch_6.12.8-i9500.tar but after the install My mobile had null imei. I was able to successfully root the device and install SUPERSU and Xmodgames also worked fine but without any mobile network due to NULL Imei.
I tried all forums some had software to remove the null state and some had service code etc, but nothing worked and a techie told me that this can now be restored only through some box available only with professionals and asked me a very high fee almost 30% cost of the device.
I finally figured it out and restored my phone back to lollipop 5.0.1 after doing a wipe by PHILZ (without root selected) and my phone was back to its original state.
Hope this helps.
rschauhan said:
I first rooted and installed SUPERSU on my device with lollipop 5.0.1 to get x mode games. Since xmodgames doesn't support lollipop currently I decided to downgrade my Samsung GT-I9500 from lollipop 5.0.1 to Kit Kat via ODIN after doing a complete wipe via philz_touch_6.12.8-i9500.tar but after the install My mobile had null imei. I was able to successfully root the device and install SUPERSU and Xmodgames also worked fine but without any mobile network due to NULL Imei.
I tried all forums some had software to remove the null state and some had service code etc, but nothing worked and a techie told me that this can now be restored only through some box available only with professionals and asked me a very high fee almost 30% cost of the device.
I finally figured it out and restored my phone back to lollipop 5.0.1 after doing a wipe by PHILZ (without root selected) and my phone was back to its original state.
Hope this helps.
Click to expand...
Click to collapse
thnx for reply but as i said about downgrading lollipop to kitkat
i want kitkat back on my phone .. lollipop sucks... worst battery backup , working slow , no silent mode, no fully root , no xposed , no greenfy ( rooted) and many more :crying:
and plz some1 make a new thread for guide downgrading LP to KK step by step ....
The easy way:
1. Flash custom recovery
2. Flash custom 4.4.2
3. Amazing it works.
Killnolife said:
User who say that are user who don't even care about their country code nor their CSC
If your CSC is XEF then you have to flash a non-knox 4.4.2 XEF ROM, if wifi/IMEI is null it's most likely a MODEM mismatch.
Just reflash the modem by using Odin3's CP section :good:
EDIT :
Or you may just try Mobile Odin Pro, for a buck it downgrades the phone a simple way.
Click to expand...
Click to collapse
where to find MODEM and how to check that which modem file work for my device?
Lennyz1988 said:
The easy way:
1. Flash custom recovery
2. Flash custom 4.4.2
3. Amazing it works.
Click to expand...
Click to collapse
thnks .. is it safe ? i mean IMEI null or Wifi or any other issues comes after custom rom?
i am scare
C00l.vishu.ar0ra said:
thnks .. is it safe ? i mean IMEI null or Wifi or any other issues comes after custom rom?
i am scare
Click to expand...
Click to collapse
It's safe.
Lennyz1988 said:
It's safe.
Click to expand...
Click to collapse
ok let me try ... and i will tell u after this...

please Help Me !!!! My phone SM-G530H and I Want to flash stock rom but always fail !

please Help Me !!!! My phone SM-G530H and I Want to flash stock rom or any rom from Download Mode but every thing Fail !!!! :crying::crying::crying::crying:
it's show "KNOX Check Fail : aboot" any thing i want to flash it failed ! why ??!! :crying::crying:
is this problem Cause KNOX Bootloader ?? and " Download secure : ENABLE " is this problem because my download protected ?
my mobile android version is KitKat 4.4.4 if i delete aboot.mbn and bootloader files from stock russian lollipop and flashed it will break my phone ?????????? and i will no be able to return to stock rom kitkat because i can't install anyrom ?
same here, but my problem is SECURE CHECKFAIL : recovery...
download correct rom. check baseband xxu or xcu ..
Killwish said:
download correct rom. check baseband xxu or xcu ..
Click to expand...
Click to collapse
I tried but no luck and i want to install anything like custom recovery or stock russian Lolipop is this bootloader problem ? how to unlock knox bootloader in galaxy grand prime ? or flash anything
mohamedfaky said:
I tried but no luck and i want to install anything like custom recovery or stock russian Lolipop is this bootloader problem ? how to unlock knox bootloader in galaxy grand prime ? or flash anything
Click to expand...
Click to collapse
" Could not be normal boot " ?!!!!!!!!!!!!!!! :crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
download this firmware as long as it matches whats originally on the phone.
http://www.sammobile.com/firmwares/download/35758/G530HXXU1ANI8_G530HSER1ANI8_SER/
use the newest odin and flash it in the ap slot with stock settings
silentgumm said:
download this firmware as long as it matches whats originally on the phone.
http://www.sammobile/firmwares/download/35758/G530HXXU1ANI8_G530HSER1ANI8_SER/
use the newest odin and flash it in the ap slot with stock settings
Click to expand...
Click to collapse
Thank you but my mobile can't install any rom from another country so i downloaded stock rom from my country and flashed it success and my problem has solved but i want to install stock lollipop rom what should i do ? Lollipop stock rom only russian country and odin always fail if you know how to install lollipop from russian country please tell me ( in my phone show " KNOX Check fail : aboot " and Thank you

Dead Phone :/

I have samsung Galaxy S4 ( I9500 )
i have installed cm-12.1-20160918-NIGHTLY-i9500.zip With philz_touch_6.48.4-i9500 and it worked Well but there was a problem i call I can't here or the other here me unless open speaker and close it again it works well .. then i got OTA update i started to download it with CMUpdater and download speed wasn't well i canceled the download and Downloaded ( cm-12.1-20161002-NIGHTLY-i9500.zip ) manually and Flash it with the same Recovery after this flash process my phone started normally but when i Lock the screen and try to wake it up again it won't wake up but the device still working :/ .. and other problem is Back, menu Keys didn't work any more After this flash .. and Recovery Won't Boot :/ tried to change ( CWM - Phliz ) it and nothing happen .. TWRP is the only recovery Work But other problem still .. and i flash Stock Rom With ODIN and Problems Still i flash Kit kat and Lolipop .. nothing help :"3 ..
any help ??
ahmed44251 said:
I have samsung Galaxy S4 ( I9500 )
i have installed cm-12.1-20160918-NIGHTLY-i9500.zip With philz_touch_6.48.4-i9500 and it worked Well but there was a problem i call I can't here or the other here me unless open speaker and close it again it works well .. then i got OTA update i started to download it with CMUpdater and download speed wasn't well i canceled the download and Downloaded ( cm-12.1-20161002-NIGHTLY-i9500.zip ) manually and Flash it with the same Recovery after this flash process my phone started normally but when i Lock the screen and try to wake it up again it won't wake up but the device still working :/ .. and other problem is Back, menu Keys didn't work any more After this flash .. and Recovery Won't Boot :/ tried to change ( CWM - Phliz ) it and nothing happen .. TWRP is the only recovery Work But other problem still .. and i flash Stock Rom With ODIN and Problems Still i flash Kit kat and Lolipop .. nothing help :"3 ..
any help ??
Click to expand...
Click to collapse
Get the i9500 lollipop firmware from the sammobile and flash it via odin. Please get the firmware which is the same or newer then your bootloader.
sway8966 said:
Get the i9500 lollipop firmware from the sammobile and flash it via odin. Please get the firmware which is the same or newer then your bootloader.
Click to expand...
Click to collapse
i flashed it several times before and worked well .. but now i don't know what's happening
sway8966 said:
Get the i9500 lollipop firmware from the sammobile and flash it via odin. Please get the firmware which is the same or newer then your bootloader.
Click to expand...
Click to collapse
tell me how to know My Device Bootloader
ahmed44251 said:
tell me how to know My Device Bootloader
Click to expand...
Click to collapse
Just install phone info app from play store
Arpit Aggarwal said:
Just install phone info app from play store
Click to expand...
Click to collapse
it said the same bootloader in version i flash .. can i know the original or some thing like this ?
ahmed44251 said:
it said the same bootloader in version i flash .. can i know the original or some thing like this ?
Click to expand...
Click to collapse
When I was in kitkat I did not check the bootloader version and flashed older version which tripped the knox counter. That was why I I asked you to check the bootloader .
If you flashed the correct firmware via odin, believe that the firmware download has no problem, and flashing odin did not give any errors and yet you still have some problem, then your problem likely to be a hardware failure rather than software.
check the checksum of the downloaded firmware, flashing from different usb port or different computer, flashing with different version of odin, etc.. are the tries you can do.
sway8966 said:
When I was in kitkat I did not check the bootloader version and flashed older version which tripped the knox counter. That was why I I asked you to check the bootloader .
If you flashed the correct firmware via odin, believe that the firmware download has no problem, and flashing odin did not give any errors and yet you still have some problem, then your problem likely to be a hardware failure rather than software.
check the checksum of the downloaded firmware, flashing from different usb port or different computer, flashing with different version of odin, etc.. are the tries you can do.
Click to expand...
Click to collapse
i'll try
i downloaded Jelly bean, Kitkat and i'll flash each
Nothing Worked it still same things
ahmed44251 said:
i'll try
i downloaded Jelly bean, Kitkat and i'll flash each
Click to expand...
Click to collapse
Could you tell me your bootloader version of your phone and also give me the link of the lollipop firmware that you downloaded from the sammobile.
if it is possible could you tell me what message you have when you flash that lollipop firmware via odin.
If your phone is on lollipop, flashing kit-kat or jelly beam wont help and it could harm your phone.
sway8966 said:
Could you tell me your bootloader version of your phone and also give me the link of the lollipop firmware that you downloaded from the sammobile.
if it is possible could you tell me what message you have when you flash that lollipop firmware via odin.
If your phone is on lollipop, flashing kit-kat or jelly beam wont help and it could harm your phone.
Click to expand...
Click to collapse
bootloader Version : I9500XXUHPH3
Frimware link : http://www.sammobile.com/firmwares/download/93065/I9500XXUHPH3_I9500SERHPH1_SER/
Odin didn't Gave me any Error Messages .. it work Like charm
Kitkat Solve Original Recovery Problem .. and two other problems still ...but lollipop all 3 still
Could 4Files Firmware Help ??
ahmed44251 said:
bootloader Version : I9500XXUHPH3
Frimware link : http://www.sammobile.com/firmwares/download/93065/I9500XXUHPH3_I9500SERHPH1_SER/
Odin didn't Gave me any Error Messages .. it work Like charm
Kitkat Solve Original Recovery Problem .. and two other problems still ...but lollipop all 3 still
Click to expand...
Click to collapse
Well ph1/ph3 is the latest firmware for i9500 . It was released a week ago. It is for Russia. I am using the firmware released in 2015. Try to download it again and flash it.
4 files Frimware and I9500XXUHPH3 Didn't help :/
this maybe Hardware problem (board .. )

Categories

Resources