Unroot for Note 3 (NC4) - Galaxy Note 3 Q&A, Help & Troubleshooting

So last night I just rooted my Note using towelroot, and decided I didn't want it since it had an issue with updating SU Binarys and that b.s. so I ended up installing Root Checker, Ginger Unroot (which I paid $0.99 for) and Busy box Installer.....well before I decided against thay I didn't want to keep root and was trying to fix the SU, I instlled.the.lastest busy box on to my phone, then turned around and removed busy box from my phone again with the same app.....well after I used Ginger Unroot, I finally check my phone with.Root Checker and it.said in of course did not have any kind of root whatsoever. So I was all happy until u rebooted my phone about 3 or 4 tines and realized the "Custom" under the open padlock icon never disappeared. Meaning I still got modded files on my phone ???? So now I'm really rely irritated that this Icon will not go away on boot up and that somewhere I still got modded files on my phone! I even used 2 or 3 different root checkers and they all say my phone ain't rooted! So can someone please help me out here and see what I'm doing wrong?

I think that everything associated with towelroot is removed by factory reset

RECKLESS PAIN said:
So last night I just rooted my Note using towelroot, and decided I didn't want it since it had an issue with updating SU Binarys and that b.s. so I ended up installing Root Checker, Ginger Unroot (which I paid $0.99 for) and Busy box Installer.....well before I decided against thay I didn't want to keep root and was trying to fix the SU, I instlled.the.lastest busy box on to my phone, then turned around and removed busy box from my phone again with the same app.....well after I used Ginger Unroot, I finally check my phone with.Root Checker and it.said in of course did not have any kind of root whatsoever. So I was all happy until u rebooted my phone about 3 or 4 tines and realized the "Custom" under the open padlock icon never disappeared. Meaning I still got modded files on my phone ???? So now I'm really rely irritated that this Icon will not go away on boot up and that somewhere I still got modded files on my phone! I even used 2 or 3 different root checkers and they all say my phone ain't rooted! So can someone please help me out here and see what I'm doing wrong?
Click to expand...
Click to collapse
hard reset need to back phone to normal. After hard reset i think your system will be official.

RECKLESS PAIN said:
So last night I just rooted my Note using towelroot, and decided I didn't want it since it had an issue with updating SU Binarys and that b.s. so I ended up installing Root Checker, Ginger Unroot (which I paid $0.99 for) and Busy box Installer.....well before I decided against thay I didn't want to keep root and was trying to fix the SU, I instlled.the.lastest busy box on to my phone, then turned around and removed busy box from my phone again with the same app.....well after I used Ginger Unroot, I finally check my phone with.Root Checker and it.said in of course did not have any kind of root whatsoever. So I was all happy until u rebooted my phone about 3 or 4 tines and realized the "Custom" under the open padlock icon never disappeared. Meaning I still got modded files on my phone ???? So now I'm really rely irritated that this Icon will not go away on boot up and that somewhere I still got modded files on my phone! I even used 2 or 3 different root checkers and they all say my phone ain't rooted! So can someone please help me out here and see what I'm doing wrong?
Click to expand...
Click to collapse
I think you should flash Stock NC4 firmware. It'll remove your root

OK so I just did a factory reset on my phone and iis still throwing up the "Custom" padlock on boot up. So if wth to do. And how do you flash stock firmware? I don't know of my Note 3 came with the 4.4.2 Kitkat update when it came out of the box or if it had the 4.3 firmware. So if which file to use for Odin. Also what is an Hard Reset? Can you explain that to me?
hhai2pth said:
I think you should flash Stock NC4 firmware. It'll remove your root
Click to expand...
Click to collapse

RECKLESS PAIN said:
OK so I just did a factory reset on my phone and iis still throwing up the "Custom" padlock on boot up. So if wth to do. And how do you flash stock firmware? I don't know of my Note 3 came with the 4.4.2 Kitkat update when it came out of the box or if it had the 4.3 firmware. So if which file to use for Odin. Also what is an Hard Reset? Can you explain that to me?
Click to expand...
Click to collapse
What version are you in? you can check your lastest firmware on sammobile.com. Just download it and flash via Odin

I'm running Kitkat 4.4.2 on my NC4
hhai2pth said:
What version are you in? you can check your lastest firmware on sammobile.com. Just download it and flash via Odin
Click to expand...
Click to collapse

Stock Rom
Where would I go to get the stock ROM 4.4.2 for a Telus Note 3 (SM N900W8)?

RECKLESS PAIN said:
OK so I just did a factory reset on my phone and iis still throwing up the "Custom" padlock on boot up. So if wth to do. And how do you flash stock firmware? I don't know of my Note 3 came with the 4.4.2 Kitkat update when it came out of the box or if it had the 4.3 firmware. So if which file to use for Odin. Also what is an Hard Reset? Can you explain that to me?
Click to expand...
Click to collapse
I cant find it on sammobile. You can check here: http://samsung-updates.com/device/?id=SM-N9005
Find your ROM and flash via Odin
---------- Post added at 01:22 PM ---------- Previous post was at 01:21 PM ----------
Pulprat said:
Where would I go to get the stock ROM 4.4.2 for a Telus Note 3 (SM N900W8)?
Click to expand...
Click to collapse
Your lastest Firmware: http://www.sammobile.com/firmwares/3/?download=26669

Related

Need Some Help Real Bad Real Fast

Alright so I've been at this for hours and I'm starting to get frustrated and tired. I have a I337M Rogers phone I bought off Kijiji second hand and was already unlocked for rogers. I noticed the "Device Status: Custom" today but to my knowledge I'm not sure if it has been rooted or not in the past. Seeing as I had no way of updating OTA or through Kies I decided to try and fix it by rooting through Odin with CF-Auto-Root and then use Triangle Away to reset the flash counter. After that I tried to re-flash the stock rom I downloaded off here. Sadly that didn't change the Device Status back to "Normal". I then re-rooted, did Triangle Away again but instead went into Superuser app and tapped the permanent unroot option. I then through ES File Explorer deleted the Triangle Away app and the super user app. After that I re-flashed the stock rom again.... Still **** all. As of now I am about to smash this phone to bits. All I want to do is get it back to normal stock so I can bring it in for a repair. ANY help is greatly appreciated.
Have you odin'd the stock firmware and then used triangleaway?
jd1639 said:
Have you odin'd the stock firmware and then used triangleaway?
Click to expand...
Click to collapse
It's alright, I realized after all this crap that I could just factory reset within the settings. That worked so now I am downloading the new OTA update it's also confirming "Official" as the status. Can't believe it was that simple haha.
Cool

[Q] [i9500] Burnt by 4.3 (Knox) - Can't root or downgrade - Options?

I am using the International GSM Galaxy s4 (i9500). I am one of the foolish people who rushed into 4.3 (the Russian ROM doing the rounds - I9500XXUEMJ5_I9500SEREMJ5_SER) without doing sufficient research. Initially it wouldn't even boot properly, and apps would keep crashing, but after a factory reset 4.3 is working okay. I knew that the device would get unrooted, but I didn't know Samsung had a giant turd hiding up its sleeve named Knox. Now in Odin Mode it shows "warranty bit" as "1" I have tried rooting, and everything seems to go as per plan, but it doesn't root it. When I boot the phone I get these annoying notifications - "SuperSu attempted to access system on your device without authorisation" and that the attempt was blocked blah blah blah.
Things I have tried:
I have tried rooting it using crossfire (CF-Auto-Root-ja3g-ja3gxx-gti9500), and everything goes smoothly. It downloads it in Odin mode and then goes to the red screen (recovery mode) where all the messages seem to be okay. It then boots up fine. Everything in dandy. But no root. SuperSU says "There is no SU binary installed, and Super SU cannot install it. This is a problem! If you just upgraded to Android 4.3, you need to manually re-root - consult the relevant forums for your device." The only thing I have found on forums / google is to try using the CF-Auto-Root file mentioned before).
I have tried flashing CWM and using the root option in the recovery mode menu. It says it's rooted and asks me to reboot. But same thing - no root.
Frustrated by this, I decided to go back to the way things are (If it ain't broke, don't fix it - stupid me!!!) I downloaded a 4.2.2 stock ROM firmware file which a lot of people online are recommending (INU-I9500XWUBMG5-20130726135330) but now when I try to flash it using Odin 3.9, it gives me a couple of error messages in the box in Odin and on the phone something like "Unsupported Version" comes and then it does nothing. I have to pull out the battery, and no progress.
While Knox is a horrible thing Samsung has done, it will probably not affect my day to day usage, so I am fine waiting for a solution to reset it if and when it ever comes and hope that I don't need to use the warranty or alternatively they don't enforce that stuff here in India (more out of ignorance than goodness of heart)). But not having root on my phone is very tough. Unfortunately I can't use many of my apps that require root (Titanium, Avast etc.) - and I don't see what business it is of Samsung if I want to use legit apps that require root in order to enhance my experience.
What are my options (if any )? I am open to using any other (stable) ROMs like cyanogenmod etc. if that provides a solution. Or do I just have to wait till the geniuses (crossfire etc.) figure it out?
Same problem here. I'm waiting for someone to fix it.
Seems like a lot of people around the world have the same problem as I do. I guess we will have to wait. Meantime, I guess I will try flashing the Indian firmware that just came out today (if only I had waited a day!). The Indian one seems to have Knox too, but I feel kind of like in the walking dead - we are all infected, and can't do **** about it.
I imagine whenever crossfire comes out with the root file for 4.3, it should be applicable for all region 4.3 firmwares?
no problem with root
This is interesting to me because i downloaded the mentioned 4.3 Russia rom and flashed it. After i flashed the cf auto root and now i have root. The only thing i have is i cant seem to install knox which it is saying your device is not authorised to enter knox mode. Not sure but i suspect it is because i have root. In download mode it says custom and warranty is 1.
sorry.. i forgot to mention i have the i-9500 international version.
solved!
I don't know, will it be working on update that installed by OTA, but i know that it works if you flashed update by ODIN. Now i have fully functional rooted russian 4.3 firmware.
First, you must know that this method will void your warranty, because it will activate warranty bit counter.
1. Flash the update and wipe data and cache.
2. Do not setting up your device.
3. Enter to downlod mode again, and flash the cofface recovery.
4. Enter to recovery and install the special Chainfire's supersu for 4.3 (look in attachment of this post.)
5. Reboot and setup your phone, but anyway DON'T TRY to use knox, and if you will see dialog window, where it is written about some protection - decline it every time as you see it!
6. Now, you need to stop knox services in application manager. Just stop all aplications that have "knox", and some agent that hase different name, but same icon.
7. Now you can use root, but you need to uninstall all knox services before reboot, because knox will be running again and block su binary. I used RootAppDelete.
megacrash said:
I don't know, will it be working on update that installed by OTA, but i know that it works if you flashed update by ODIN. Now i have fully functional rooted russian 4.3 firmware.
First, you must know that this method will void your warranty, because it will activate warranty bit counter.
1. Flash the update and wipe data and cache.
2. Do not setting up your device.
3. Enter to downlod mode again, and flash the cofface recovery.
4. Enter to recovery and install the special Chainfire's supersu for 4.3 (look in attachment of this post.)
5. Reboot and setup your phone, but anyway DON'T TRY to use knox, and if you will see dialog window, where it is written about some protection - decline it every time as you see it!
6. Now, you need to stop knox services in application manager. Just stop all aplications that have "knox", and some agent that hase different name, but same icon.
7. Now you can use root, but you need to uninstall all knox services before reboot, because knox will be running again and block su binary. I used RootAppDelete.
Click to expand...
Click to collapse
My friend your post is really helpful but there is a glitch knox is integrated in some system apps so when u try to remove system ui FC's so to stop knox interrupting freeze it with titanium backup cz when u freeze knox this will not crash ur system ui and u can use root even u restart your device purposely as many times you want
nickboy360 said:
My friend your post is really helpful but there is a glitch knox is integrated in some system apps so when u try to remove system ui FC's so to stop knox interrupting freeze it with titanium backup cz when u freeze knox this will not crash ur system ui and u can use root even u restart your device purposely as many times you want
Click to expand...
Click to collapse
still no luck bro ... I have removed all Knox related files through aroma file manager. installed root binary provided by you . installed auto root ... but still no luck
seems some problem with my phone
do I have to do factory reset ?
Yeah... I doubt that method would work. Plus after spending hours manually reinstalling apps and setting up accounts etc. I don't want to factory reset unless it's a sure thing. (Since I don't have root, I can't use Titanium Backup to restore my apps + data).
Is there any news on any method to root the i9500 on 4.3?
I flashed the Indian firmware, and it's working very well! (apart from the Knox b.s.)
4.2.2 downgrade from 4.3 Official Russian
Hi Friends,
I need your help.
I have upgraded to 4.3 Russian FW through ODIN. When i connected to KIES it says 'This device is not supported by KIES"
When i try Firmware upgrade and initialization, it says that it can restore to original firmware MG9. Somewhere here i have read that downgrade is not available. So if try will i brick my device. I would like to go back to original 4.2.2 and wait for official update for Africa as i am from Kenya.
Otherwise 4.3 is very fast and smooth and camera app is working very fast, better battery performance and no hanging.
I will appreciate any help. Thanks
pawandeep said:
still no luck bro ... I have removed all Knox related files through aroma file manager. installed root binary provided by you . installed auto root ... but still no luck
seems some problem with my phone
do I have to do factory reset ?
Click to expand...
Click to collapse
Mate i know there is a problem with 4.3 regarding the root i myself tried and failed to get it rooted search for the latest supersu1.60 zip on google flash with 6.0.4.4 cwm u will get ur device rooted but the warranty bits will increase ... and do not install knox if u do u will find knox counter below warranty bits .... the new boot loader with knox have a efuse kinda stuff so @Chanfire is having little trouble dealing with it...so if u have increased ur warranty bits try this link if it might help u http://forum.xda-developers.com/showthread.php?t=2317105
anyways i m currently sticking to stock mistakely updated to 4.3 now just waiting for some magician to give us a way out...
hope u get what u want and if it works give credits to the OP and just hit the thanks button if it helped...
---------- Post added at 01:10 AM ---------- Previous post was at 01:06 AM ----------
kpanand said:
Hi Friends,
I need your help.
I have upgraded to 4.3 Russian FW through ODIN. When i connected to KIES it says 'This device is not supported by KIES"
When i try Firmware upgrade and initialization, it says that it can restore to original firmware MG9. Somewhere here i have read that downgrade is not available. So if try will i brick my device. I would like to go back to original 4.2.2 and wait for official update for Africa as i am from Kenya.
Otherwise 4.3 is very fast and smooth and camera app is working very fast, better battery performance and no hanging.
I will appreciate any help. Thanks
Click to expand...
Click to collapse
Sir download kies 3 http://www.samsung.com/us/kies/#downloadWindows from here and ur device will be fully functional on 4.3
hit thanks if it helped
---------- Post added at 01:28 AM ---------- Previous post was at 01:10 AM ----------
kpanand said:
Hi Friends,
I need your help.
I have upgraded to 4.3 Russian FW through ODIN. When i connected to KIES it says 'This device is not supported by KIES"
When i try Firmware upgrade and initialization, it says that it can restore to original firmware MG9. Somewhere here i have read that downgrade is not available. So if try will i brick my device. I would like to go back to original 4.2.2 and wait for official update for Africa as i am from Kenya.
Otherwise 4.3 is very fast and smooth and camera app is working very fast, better battery performance and no hanging.
I will appreciate any help. Thanks
Click to expand...
Click to collapse
Sir Try KIES 3 its supports 4.3 andu will be able to use it
VebKr said:
I am using the International GSM Galaxy s4 (i9500). I am one of the foolish people who rushed into 4.3 (the Russian ROM doing the rounds - I9500XXUEMJ5_I9500SEREMJ5_SER) without doing sufficient research. Initially it wouldn't even boot properly, and apps would keep crashing, but after a factory reset 4.3 is working okay. I knew that the device would get unrooted, but I didn't know Samsung had a giant turd hiding up its sleeve named Knox. Now in Odin Mode it shows "warranty bit" as "1" I have tried rooting, and everything seems to go as per plan, but it doesn't root it. When I boot the phone I get these annoying notifications - "SuperSu attempted to access system on your device without authorisation" and that the attempt was blocked blah blah blah.
Things I have tried:
I have tried rooting it using crossfire (CF-Auto-Root-ja3g-ja3gxx-gti9500), and everything goes smoothly. It downloads it in Odin mode and then goes to the red screen (recovery mode) where all the messages seem to be okay. It then boots up fine. Everything in dandy. But no root. SuperSU says "There is no SU binary installed, and Super SU cannot install it. This is a problem! If you just upgraded to Android 4.3, you need to manually re-root - consult the relevant forums for your device." The only thing I have found on forums / google is to try using the CF-Auto-Root file mentioned before).
I have tried flashing CWM and using the root option in the recovery mode menu. It says it's rooted and asks me to reboot. But same thing - no root.
Frustrated by this, I decided to go back to the way things are (If it ain't broke, don't fix it - stupid me!!!) I downloaded a 4.2.2 stock ROM firmware file which a lot of people online are recommending (INU-I9500XWUBMG5-20130726135330) but now when I try to flash it using Odin 3.9, it gives me a couple of error messages in the box in Odin and on the phone something like "Unsupported Version" comes and then it does nothing. I have to pull out the battery, and no progress.
While Knox is a horrible thing Samsung has done, it will probably not affect my day to day usage, so I am fine waiting for a solution to reset it if and when it ever comes and hope that I don't need to use the warranty or alternatively they don't enforce that stuff here in India (more out of ignorance than goodness of heart)). But not having root on my phone is very tough. Unfortunately I can't use many of my apps that require root (Titanium, Avast etc.) - and I don't see what business it is of Samsung if I want to use legit apps that require root in order to enhance my experience.
What are my options (if any )? I am open to using any other (stable) ROMs like cyanogenmod etc. if that provides a solution. Or do I just have to wait till the geniuses (crossfire etc.) figure it out?
Click to expand...
Click to collapse
so sorry to hear that but dont worry ..there is always a solution ...what i did was i followed the instructions while INSTALLING WANAM V 3.0 from : http://wanamlite.com/2013/10/21/wanamlite-xxuemj5-v3-0-android-jb-4-3-xposed/ nd after that everything booted normally and i was having the warranty bit to 1 but it was working perfect and thn i there was an annoying message everytime i opened SUPERSU or some rooted apps...the root was working perfect ..knox was not doing anything to it ..just showing the SECURITY INFORMATION that the app is stopped but in real it wasnt ..so i disabled it by installing TERMINAL EMULATOR from playstore and thn opened it and typed the following :
SU (Enter)
pm disable com.sec.knox.seandroid (Enter)
and its gone ...give it a try and tell me if ur problem is solved ...good luck
i got lucky that i dint upgrade 4.3
ll_r1d0_ll said:
so sorry to hear that but dont worry ..there is always a solution ...what i did was i followed the instructions while INSTALLING WANAM V 3.0 from : http://wanamlite.com/2013/10/21/wanamlite-xxuemj5-v3-0-android-jb-4-3-xposed/ nd after that everything booted normally and i was having the warranty bit to 1 but it was working perfect and thn i there was an annoying message everytime i opened SUPERSU or some rooted apps...the root was working perfect ..knox was not doing anything to it ..just showing the SECURITY INFORMATION that the app is stopped but in real it wasnt ..so i disabled it by installing TERMINAL EMULATOR from playstore and thn opened it and typed the following :
SU (Enter)
pm disable com.sec.knox.seandroid (Enter)
and its gone ...give it a try and tell me if ur problem is solved ...good luck
Click to expand...
Click to collapse
Wouldn't uninstalling Knox completely get rid of the issues as well? Check the steps here: http://www.samsung.com/us/support/howtoguide/N0000005/13093/159642
@ll_r1d0_ll
Thanks a lot man, it really worked, although I have I9500UBUEMJ5, now I have 4.3 and root, thanks.
ll_r1d0_ll said:
so sorry to hear that but dont worry ..there is always a solution ...what i did was i followed the instructions while INSTALLING WANAM V 3.0 from : http://wanamlite.com/2013/10/21/wanamlite-xxuemj5-v3-0-android-jb-4-3-xposed/ nd after that everything booted normally and i was having the warranty bit to 1 but it was working perfect and thn i there was an annoying message everytime i opened SUPERSU or some rooted apps...the root was working perfect ..knox was not doing anything to it ..just showing the SECURITY INFORMATION that the app is stopped but in real it wasnt ..so i disabled it by installing TERMINAL EMULATOR from playstore and thn opened it and typed the following :
SU (Enter)
pm disable com.sec.knox.seandroid (Enter)
and its gone ...give it a try and tell me if ur problem is solved ...good luck
Click to expand...
Click to collapse
Mate i cannot find wanam 3.0 for i9500... this procedure is basically for i9505 when is the ETA for i9500 wanam 4.3 @wanam i know ur working hard on i9500, is there anyway where we can reset warranty bits
Sent from my GT-I9500 using XDA Premium 4 mobile app
---------- Post added at 12:40 AM ---------- Previous post was at 12:37 AM ----------
nickboy360 said:
Mate i cannot find wanam 3.0 for i9500... this procedure is basically for i9505 when is the ETA for i9500 wanam 4.3 @wanam i know ur working hard on i9500, is there anyway where we can reset warranty bits
Sent from my GT-I9500 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Sorry i dint checked it throughly ... but y cant i see an updated version in the forum but its on wanam website... :what::what:
Sent from my GT-I9500 using XDA Premium 4 mobile app
dmunera said:
@ll_r1d0_ll
Thanks a lot man, it really worked, although I have I9500UBUEMJ5, now I have 4.3 and root, thanks.
Click to expand...
Click to collapse
ur always welcome
---------- Post added at 12:12 PM ---------- Previous post was at 12:10 PM ----------
nickboy360 said:
Mate i cannot find wanam 3.0 for i9500... this procedure is basically for i9505 when is the ETA for i9500 wanam 4.3 @wanam i know ur working hard on i9500, is there anyway where we can reset warranty bits
Sent from my GT-I9500 using XDA Premium 4 mobile app
---------- Post added at 12:40 AM ---------- Previous post was at 12:37 AM ----------
Sorry i dint checked it throughly ... but y cant i see an updated version in the forum but its on wanam website... :what::what:
Sent from my GT-I9500 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
if u have checked the link i gave u above inside it..it is written that " Welcome to WanamLite Rom for Galaxy S4 I9500" ..I have flashed this rom o my GT I9500 and its working like a charm and it have no idea how to reset the warranty bits and i personally dont care about my warranty
---------- Post added at 12:17 PM ---------- Previous post was at 12:12 PM ----------
ali87 said:
Wouldn't uninstalling Knox completely get rid of the issues as well? Check the steps here: http://www.samsung.com/us/support/howtoguide/N0000005/13093/159642
Click to expand...
Click to collapse
well it depends on your choice i followed the steps given by CHAINFIRE in the I9505 forum
@ll_r1d0_ll mate thanks alot for ur feedback about the rom and when is @indie and @tamirda is releasing their roms beacuse personally i never tried wanam on my previous i9300 n7000 and n7100 ... so if i flash wanamlite v3.1 any problem or bugs till date???
Sent from my GT-I9500 using XDA Premium 4 mobile app
nickboy360 said:
@ll_r1d0_ll mate thanks alot for ur feedback about the rom and when is @indie and @tamirda is releasing their roms beacuse personally i never tried wanam on my previous i9300 n7000 and n7100 ... so if i flash wanamlite v3.1 any problem or bugs till date???
Sent from my GT-I9500 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
i literally have no idea that when they are going to release 4.3 version of their roms :/ ... i was alsoo waiting for their roms but i thought i should give wanam's rom a try and i have found that its great and widout any problem .....i am currently using v3.1 i didnt find any issue i just flashed it over 3.0 and its working perfect !
ASK
VebKr said:
Spoiler: VebKr
I am using the International GSM Galaxy s4 (i9500). I am one of the foolish people who rushed into 4.3 (the Russian ROM doing the rounds - I9500XXUEMJ5_I9500SEREMJ5_SER) without doing sufficient research. Initially it wouldn't even boot properly, and apps would keep crashing, but after a factory reset 4.3 is working okay. I knew that the device would get unrooted, but I didn't know Samsung had a giant turd hiding up its sleeve named Knox. Now in Odin Mode it shows "warranty bit" as "1" I have tried rooting, and everything seems to go as per plan, but it doesn't root it. When I boot the phone I get these annoying notifications - "SuperSu attempted to access system on your device without authorisation" and that the attempt was blocked blah blah blah.
Things I have tried:
I have tried rooting it using crossfire (CF-Auto-Root-ja3g-ja3gxx-gti9500), and everything goes smoothly. It downloads it in Odin mode and then goes to the red screen (recovery mode) where all the messages seem to be okay. It then boots up fine. Everything in dandy. But no root. SuperSU says "There is no SU binary installed, and Super SU cannot install it. This is a problem! If you just upgraded to Android 4.3, you need to manually re-root - consult the relevant forums for your device." The only thing I have found on forums / google is to try using the CF-Auto-Root file mentioned before).
I have tried flashing CWM and using the root option in the recovery mode menu. It says it's rooted and asks me to reboot. But same thing - no root.
Frustrated by this, I decided to go back to the way things are (If it ain't broke, don't fix it - stupid me!!!) I downloaded a 4.2.2 stock ROM firmware file which a lot of people online are recommending (INU-I9500XWUBMG5-20130726135330) but now when I try to flash it using Odin 3.9, it gives me a couple of error messages in the box in Odin and on the phone something like "Unsupported Version" comes and then it does nothing. I have to pull out the battery, and no progress.
While Knox is a horrible thing Samsung has done, it will probably not affect my day to day usage, so I am fine waiting for a solution to reset it if and when it ever comes and hope that I don't need to use the warranty or alternatively they don't enforce that stuff here in India (more out of ignorance than goodness of heart)). But not having root on my phone is very tough. Unfortunately I can't use many of my apps that require root (Titanium, Avast etc.) - and I don't see what business it is of Samsung if I want to use legit apps that require root in order to enhance my experience.
What are my options (if any )? I am open to using any other (stable) ROMs like cyanogenmod etc. if that provides a solution. Or do I just have to wait till the geniuses (crossfire etc.) figure it out?
Click to expand...
Click to collapse
Hi @VebKr, seems like I did same with you, , and now my warranty bit has became 1 already, and I couldn't turn it back to 0, I've searched how to do it, but I couldn't find it. And now, I don't know what to say, but seems like I lost my warranty because of that, I've just bought this phone last month actually. Is there anyone who able to make it back?
engineer24 said:
Hi @VebKr, seems like I did same with you, , and now my warranty bit has became 1 already, and I couldn't turn it back to 0, I've searched how to do it, but I couldn't find it. And now, I don't know what to say, but seems like I lost my warranty because of that, I've just bought this phone last month actually. Is there anyone who able to make it back?
Click to expand...
Click to collapse
Mate you should have read the whole post before flashing the rom frankly now there is nothing you can do as i and @ll_r1d0_ll were discussing about the same so you should have waited for little more time before flashing the wanamlite 3.1 i got a new myself a new s4 so now the old one is having wanamlite which is tremendous i just loved it but still having a second thought on updating my new s4 to custom .. will wait for some time for some of the magician here on xda will turn the wheel, so we might get lucky.

Error while trying to update to 4.4 (D800)

Hey all. I have a rooted D800 (AT&T variant) with stock recovery and on firmware version D80010q. I am trying to update to the KitKat, but It's giving me an error every time I download and try to update. The error is: Err: 0x1111004. When the phone reboots, it says "This device is suspected in rooting. Software update is not available for rooted device".
I have tried using OTA rootkeeper to temporarily unroot, but it doesn't seem to work. Is there any way for me to get the update without having to flash back to stock?
This is my problem too. Hopefully there is a way.
Sent from my LG-D800 using xda app-developers app
Maybe doing a factory reset from stock recovery?
Sent from my LG-D805 using xda app-developers app
rohan611 said:
Hey all. I have a rooted D800 (AT&T variant) with stock recovery and on firmware version D80010q. I am trying to update to the KitKat, but It's giving me an error every time I download and try to update. The error is: Err: 0x1111004. When the phone reboots, it says "This device is suspected in rooting. Software update is not available for rooted device".
I have tried using OTA rootkeeper to temporarily unroot, but it doesn't seem to work. Is there any way for me to get the update without having to flash back to stock?
Click to expand...
Click to collapse
Its due to the custom recovery you have on it..Go back to stock dont root and update...maybe try root keeper to see if that can help
antawnm26 said:
Its due to the custom recovery you have on it..Go back to stock dont root and update...maybe try root keeper to see if that can help
Click to expand...
Click to collapse
nope. as i said in the OP< i have a stock recovery.
rohan611 said:
nope. as i said in the OP< i have a stock recovery.
Click to expand...
Click to collapse
then try root keeper it will disable root but back up root path and reinstate it once the update is done
antawnm26 said:
then try root keeper it will disable root but back up root path and reinstate it once the update is done
Click to expand...
Click to collapse
as i said in the OP...I tried root keeper to temporarily unroot and it didn't work. I'm going back to stock and going from there.
rohan611 said:
as i said in the OP...I tried root keeper to temporarily unroot and it didn't work. I'm going back to stock and going from there.
Click to expand...
Click to collapse
lol..yeah i read each statement in your OP just wanted to get to that last part of you saying your going back to stock and going from there, because thats your next option....
Let us know if you went back to stock then did the update and it worked.
I've read that some people kept root through their OTA. Why are some people able to update and others aren't. I've been reading up on this for the VZW update whenever that happens. I hope I haven't kept all this bloatware on my phone for no reason!!
Sent from my VS980 4G using Tapatalk
hinduboy74 said:
Let us know if you went back to stock then did the update and it worked.
Click to expand...
Click to collapse
I reverted back to stock using the instructions in the Stickied post. I was then able to update to D80010o. I had to call to request a rep to push out the D80010q update again though. They're calling it a "security update" so you should use that phrase when talking to the rep so that they don't get confused and think that you're just requesting that they push out the KitKat update.
Once I got the D80010q update, the KitKat update was available and I was able to update. Unfortunately, I didn't try to root it prior to updating - though to be honest, I don't really feel the need to root anymore. Only reason I had it rooted before was to get the multitasking button, but I'm okay with using an S3 layout (Menu, Home, Back) since that's the phone I'm coming from.
I have posted this in Other thread too.. may be this helps (Or save some time)
1.What ever the phone came with (never saw the version)
2. Rooted: Then just froze the apps I don't need (DID NOT DELETE) NO Exposed Or anything fancy. PURE STOCK just at&T bloat froze.
3. Then the Silent update came... I guess it was 10q (few weeks back), It was fine... ROOT remained.
4. Kitkat update came..
5. I de-froze all the apps before the update..
6. Tried to installed KITKAT after download... (After 1 of 2) it says Err: 0x111004
Once booted it said this update is not for rooted device. (or something similar)
7. I thought may be it recognized SuperSU/Super USer so I Uninstalled (Removed complete ROOT through the app) Download again the Kitkat.. Same ERROR And SAME message. I went it Recovery (Button combo) to complete wipe (Noticed RED Rooted below on the screen on Recovery) did the complete wipe and Still No Luck.
8. Go back to Complete stock through flash method as I realized ROOTED written on recovery so no wipe will help that...
9. chat with AT&T asked them to push 10q the silent updated.
10. once it was done I asked her if she can push Kitkat too.. she did.
The only thing was lost all the data in the process.. But I kept my pic's Auto backup through g+ so they are safe.. rest everything I lost which I don't care anyway. (Chat etc)
SO the BOTTOM LINE IS... If you see ROOTED on your stock recovery NO matter what you do... It will not update. If you dont see it.. then your are fine I Guess ("I guess" is the keyword)
Edit:
Also I'm not sure if there are 2 versions of root methods... So if anyone has Root and was able to update to kitkat.. Can you link which Root method you guys used.. Thanks in advance.
streetsmart999 said:
Also I'm not sure if there are 2 versions of root methods... So if anyone has Root and was able to update to kitkat.. Can you link which Root method you guys used.. Thanks in advance.
Click to expand...
Click to collapse
I used ioroot to root while on D80010d. I think some people who have had success rooted while on D80010o
rohan611 said:
I used ioroot to root while on D80010d. I think some people who have had success rooted while on D80010o
Click to expand...
Click to collapse
That is correct. I was on D80010o all four times I updated to Kit-kat and kept root everytime.
streetsmart999 said:
1.What ever the phone came with (never saw the version)
2. Rooted: Then just froze the apps I don't need (DID NOT DELETE) NO Exposed Or anything fancy. PURE STOCK just at&T bloat froze.
3. Then the Silent update came... I guess it was 10q (few weeks back), It was fine... ROOT remained.
4. Kitkat update came..
5. I de-froze all the apps before the update..
6. Tried to installed KITKAT after download... (After 1 of 2) it says Err: 0x111004
Once booted it said this update is not for rooted device. (or something similar)
7. I thought may be it recognized SuperSU/Super USer so I Uninstalled (Removed complete ROOT through the app) Download again the Kitkat.. Same ERROR And SAME message. I went it Recovery (Button combo) to complete wipe (Noticed RED Rooted below on the screen on Recovery) did the complete wipe and Still No Luck.
8. Go back to Complete stock through flash method as I realized ROOTED written on recovery so no wipe will help that...
9. chat with AT&T asked them to push 10q the silent updated.
10. once it was done I asked her if she can push Kitkat too.. she did.
The only thing was lost all the data in the process.. But I kept my pic's Auto backup through g+ so they are safe.. rest everything I lost which I don't care anyway. (Chat etc)
SO the BOTTOM LINE IS... If you see ROOTED on your stock recovery NO matter what you do... It will not update. If you dont see it.. then your are fine I Guess ("I guess" is the keyword)
Edit:
Also I'm not sure if there are 2 versions of root methods... So if anyone has Root and was able to update to kitkat.. Can you link which Root method you guys used.. Thanks in advance.
Click to expand...
Click to collapse
Same thing happened to me. I followed your advice in the other thread and did a reset using the LG flash tool, following rootjunky's guide on youtube and using the files from his website. Everything went smoothly except for at the end I got the same check flag error thing, but it completed the reset perfectly.
I then chatted with ATT and had him push the update to my phone which brought me up to d80010o. It finally went through the update and didn't get me the root error. So I think I'm in the green now. He said that he didn't have an option to push the kit kat update to my phone but it told him to have me do it through the software update in the settings. Which I tried and it said it was up to date. But he said that since they roll out in batches my phone might just not be ready for it yet. I will keep trying though and I'm one step further than I was before. At least it let me update. Shout out to ATT though, chat service is on point.

[Q] Note 3 Manual Re-Root - no SU binary installed

I rooted my device with Kingo Android root. I am currently running android OS 4.3.
Everything was going just fine until just today when opened SuperSU and it told me that there is no SU binary installed. SuperSU cannot install it.
Pretty much I need to manually re-root my device.
I am not aware of any recovery files that I may have. To clarify, I have never backed up my device in any way. I have only had it for a month, and there is hardly anything on it. I figured, why bother? Well now I know.
I have done quite a few google searches about this, and I can not find any help.
What is my best course of action?
Thank you very much.
Try reflash and re-root with cf-auto root through Odin. A a small question: u still have root right to install some app such root explorer and titanium backup?
Sent from my SM-N9005 using XDA Premium 4 mobile app
hhai2pth said:
Try reflash and re-root with cf-auto root through Odin. A a small question: u still have root right to install some app such root explorer and titanium backup?
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Unfortunatly, I no longer have root. None of my root apps can get root permissions because the SU binary is missing.
I tried flashing my firmware, but now my phone is stuck in an unusable state. The official firmware leaves me unable to boot with a "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
When I flash a different ROM on top of that one, all my spen stuff is messed up.
This is way different from jailbreaking. There are so many rom files I have a hard time finding the one I need.
SM-900A in case anyone wants my number.
DrShenanigan said:
Unfortunatly, I no longer have root. None of my root apps can get root permissions because the SU binary is missing.
I tried flashing my firmware, but now my phone is stuck in an unusable state. The official firmware leaves me unable to boot with a "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
When I flash a different ROM on top of that one, all my spen stuff is messed up.
This is way different from jailbreaking. There are so many rom files I have a hard time finding the one I need.
SM-900A in case anyone wants my number.
Click to expand...
Click to collapse
You need to go on sammobile and download your stock firmware (you probably want to stay on 4.3 unless your particular phone and carrier have root capabilities on 4.4.2 which verizon and att do not yet have) then flash it through odin... just search your model # through sammobile and it will show all the available stock firmwares. That will at least get you running again then u will have to root it again from there
Posted from my beast of a VZW Note 3!!
I downloaded the firmware from that site and have tried to flash it.
I get an Error Meassage:
SW REV CHECK FAIL : [sb1]Fused 2 > Binary 1
DrShenanigan said:
I rooted my device with Kingo Android root. I am currently running android OS 4.3.
Everything was going just fine until just today when opened SuperSU and it told me that there is no SU binary installed. SuperSU cannot install it.
Pretty much I need to manually re-root my device.
I am not aware of any recovery files that I may have. To clarify, I have never backed up my device in any way. I have only had it for a month, and there is hardly anything on it. I figured, why bother? Well now I know.
I have done quite a few google searches about this, and I can not find any help.
What is my best course of action?
Thank you very much.
Click to expand...
Click to collapse
1st : I dunno ur device which version of note 3.
2nd : kingo sometimes for some device not working well. Try avoid to use this method. Try cf-autoroot instead. Easy nd simple, but knox will trip.
3rd : have u tried update to latest supersu?
3rd :
Sent from somewhere under the sky, at the vorner of this rounded earth.
antique_sonic said:
1st : I dunno ur device which version of note 3.
2nd : kingo sometimes for some device not working well. Try avoid to use this method. Try cf-autoroot instead. Easy nd simple, but knox will trip.
3rd : have u tried update to latest supersu?
3rd :
Sent from somewhere under the sky, at the vorner of this rounded earth.
Click to expand...
Click to collapse
Updating SuperSU is what cause this mess, I believe. It's too late for that now anyhow, because my phone does not boot.
I have the SM-900A. There is no cf-autoroot for it. Not that I canfind at least.
DrShenanigan said:
Updating SuperSU is what cause this mess, I believe. It's too late for that now anyhow, because my phone does not boot.
I have the SM-900A. There is no cf-autoroot for it. Not that I canfind at least.
Click to expand...
Click to collapse
Try this, mate
http://forum.xda-developers.com/showthread.php?t=2466423

[Q] Please help a noob out. This is the last time I'm trying :(

Ok. So I've tried to ask this question before, and every time I get people telling me to do things I just don't understand. Sorry. Not trying to spam. If this question goes unanswered I will not post another and I apologize if this is too stupid. Just a noob trying to get help.
All I want is to update my phone (SM-G900F) to the most recent Android version. Like 3 weeks ago I got the prompt to update OTA because a new update was available. I've haven't modified my phone other than Towelrooting in July and having SuperSU and Titanium. Had planned to get way more root stuff but so far I haven't had the time.
OTA Update failed, told me my phone was modified in an unauthorized way and suggested to update through Kies.
Here's my question: What's the simplest, easiest way to update correctly? I'd rather do it one way or the other: Either, I unroot with SuperSU and remove Titanium, then download Kies and try to update, if successful I reroot with Towelroot OR: I can manage to update WITH Towelroot and SuperSU still there, if so, how?
That's all I'm asking. Would the first option work best? Is there a better way? I don't want to use Odin or anything like that, I don't want to use custom roms or anything, I'd just like to have the most recent update and root, that's it. Please put me out of my misery.
tempest22 said:
What's the simplest, easiest way to update correctly?
I don't want to use Odin or anything like that
Click to expand...
Click to collapse
You can't have it both ways. Odin is the easiest, otherwise try Kies.
Download NeatRom and you will get the latest Rom.
http://forum.xda-developers.com/showthread.php?t=2828562
Verstuurd vanaf mijn SM-G900F met Tapatalk
BLuFeNiX said:
You can't have it both ways. Odin is the easiest, otherwise try Kies.
Click to expand...
Click to collapse
So would it work if I unroot with SuperSU, then install Kies on my pc and update to most recent Anroid version?
Or, if I'm already going to unroot first with SuperSU, can I then just try the OTA update and if successful, can I reroot with Towelroot or will that be outdated with the most recent Android version?
Download odin 3.09. Download the latest official firmware for your device, search the forums to find the latest one. Extract the .tar file inside the firmware zip u downloaded. Make sure you have the drivers installed for your phone on your computer. Extract Odin and run the .exe to open the Odin program. Put your phone into download mode> While Powered off hold volume down.. Home.. And power button. Press continue when given the warning plug in your phone to the PC.. Within Odin click the ap slot. Load the .Tar file which is your firmware. Make sure Odin recognizes your phone is plugged. Hit start. Sit back and watch it flash.
Sent from my SM-G900T using XDA Free mobile app
Ok. I hope this does not sound arrogant. But I honestly can't believe why anyone on this forum can't directly answer my question instead of giving me other suggestions. I don't want to use Odin, it's too complex for me and I don't want to mod my phone to hell and back. I just want to get the most recent update released 2 or so weeks ago.
Nobody has said whether the Kies method works (letting Towelroot remain on my phone and trying to download most recent Android version with Kies on my pc), or whether I unroot with SuperSU, remove all root apps (I only have 3), then try the OTA update just with my phone and see if that works. Can somebody please just answer that? PLEASE
..
I think I'm correct in saying the most recent ota comprised on little more than minor tweaks and security updates.
The world's not going to come to an end if you don't have the very latest update.
Perhaps more research BEFORE choosing the root route would have been wise, at least then you would be more informed as to the outcome of your chosen option.
Having read the last few posts it's clear to me, even as a relative S5 noob that your questions been answered quite comprehensively. Just not the install an app and reboot option you were hoping for.
sent from SGS5 running NeatRom 0X1
---------- Post added at 08:07 PM ---------- Previous post was at 08:02 PM ----------
Just before I get stuck into my pizza. .....
.......did you by any chance select ART rather than running a DALVIK system?
I did that before rooting and I got the same can't install ota due to modified yada yada.....
I reverted back to Dalvik and the ota installed no problem. As I said.... This was pre rooting so might not be relevant.
sent from SGS5 running NeatRom 0X1
does.the kies method i asked about.work.
tempest22 said:
does.the kies method i asked about.work.
Click to expand...
Click to collapse
from reading the replies above i think the answer is no it wont but why not just give it a try, if its not going to work it will just tell you so (like the ota update did)
your options as stated above are to either use odin and install the latest update or take it to a shop or find someone who is close to you who knows how to use odin and ask them if they wouldnt mind doing it for you and buy them a beer as a thankyou,
odin isnt hard to use in fact it couldnt be any easier to use for a noob just follow a couple of simple steps and your done
i hope you get this sorted
tempest22 said:
does.the kies method i asked about.work.
Click to expand...
Click to collapse
It should work as I have done that on my old device before but you have to re-root your s5 again after the update.
Sent from my SM-G900F using Tapatalk
Towelroot after latest OTA-Update doesn't work!
I don't know if the idea of an update is so good.
My SM-900F was Towelrooted to run Titanium, too.
My setup was "OTA when in a WIFI network" and clicked "update yes" - I was typing some notes very late,
the message box popped up and --- swoosh --- the Update was running. No need to say my notes weren't saved?
I don't even know what that update contained and what it was good for.
Now I run 4.4.2 ,
Baseband G900FXXU1ANG2
Kernel 3.4.0-2089850 [email protected] #1 July 3rd 2014
Build KOT49H.G900FFXXU1ANG2.
Root access has gone, Towelroot says "device not supported", Titanium doesn't work anymore.
No I have to start Windows only to run KIES - waf.
So be careful.
Dirk
Ok, so I have unrooted with supersu and removed Titanium. Supersu is still there. I've tried to do an OTA update, and surprisingly this time it actually went so far as to actually download the updates. Then after I press install, it goes into boot mode and says like 20% or more installed, then it goes black and reboots, everything is normal but the update failed.
What. Now.
They should really start telling people that rooting will cause updates to become a nightmare. Please help me, this is ridiculous.
tempest22 said:
They should really start telling people that rooting will cause updates to become a nightmare. Please help me, this is ridiculous.
Click to expand...
Click to collapse
Lack of common sense is my diagnosis.
Of course it's not always going to be plain sailing. And early days with any new handset means there are answers we just don't know yet.
That's why pretty much every thread has a precursor from the Dev that says "use at your own risk","read instructions fully before flashing" or " it's not my fault if your dog gets fleas or your nan pegs it" etc etc etc. If you have any doubts rooting your phone wasnt for you..... you shouldn't have rooted.
sent from SGS5 running NeatRom 0X1
tempest22 said:
They should really start telling people that rooting will cause updates to become a nightmare. Please help me, this is ridiculous.
Click to expand...
Click to collapse
Lack of common sense is my diagnosis.
Of course it's not always going to be plain sailing. And early days with any new handset means there are answers we just don't know yet.
That's why pretty much every thread has a precursor from the Dev that says "use at your own risk","read instructions fully before flashing" or " it's not my fault if your dog gets fleas or your nan pegs it" etc etc etc. If you have any doubts rooting your phone wasnt for you..... you shouldn't have rooted.
sent from SGS5 running NeatRom
bump, can somebody tell me conclusively for once and for all if the following will work: I have unrooted with supersu (originally rooted with Towelroot in July) supersu and titanium are removed, OTA update still doesn't work. if i install Kies on my pc, will an update work, AND will I be able to use towelroot again to reroot.
thank you.
please?
tempest22 said:
bump, can somebody tell me conclusively for once and for all if the following will work: I have unrooted with supersu (originally rooted with Towelroot in July) supersu and titanium are removed, OTA update still doesn't work. if i install Kies on my pc, will an update work, AND will I be able to use towelroot again to reroot.
thank you.
Click to expand...
Click to collapse
Did you use Triangle Away to reset the system status and binaries to official? If not reroot with Towelroot again, use Triangle Away to reset the counters (besides the KNOX flag), unroot with the superSU app, then flash a stock rom with Odin and after that factory reset. Your device is official now.
gee2012 said:
Did you use Triangle Away to reset the system status and binaries to official? If not reroot with Towelroot again, use Triangle Away to reset the counters (besides the KNOX flag), unroot with the superSU app, then flash a stock rom with Odin and after that factory reset. Your device is official now.
Click to expand...
Click to collapse
jesus ****ing christ. i'm not that kind of a phone pro guy. I just want to know if updating with Kies with allow me to reroot afterwards again (whether or not with Towelroot or ****ing Odin isn't important anyway). I rooted with towelroot in july, know isn't tripped or whatever. I have unrooted with supersu. Now I just want to know whether or not updating with Kies on my pc will be successful, and if it will allow me to reroot again, like with Towelroot...
PLEASE
tempest22 said:
jesus ****ing christ. i'm not that kind of a phone pro guy. I just want to know if updating with Kies with allow me to reroot afterwards again (whether or not with Towelroot or ****ing Odin isn't important anyway). I rooted with towelroot in july, know isn't tripped or whatever. I have unrooted with supersu. Now I just want to know whether or not updating with Kies on my pc will be successful, and if it will allow me to reroot again, like with Towelroot...
PLEASE
Click to expand...
Click to collapse
Well I know why no one can answer that simple question. Because no one has done it that way. That is why you can't get the answer you seek. So you have a choice, give up and stop asking, or be the first to try it. Then post here if it works or not.
Sent from my HTC One_M8 using Tapatalk

Categories

Resources