Related
The title basically says it all. I have a rooted mytouch 3g and the phone works perfectly fine when you are using it. The problem comes when the screen turns off to go to sleep. when I try to turn the screen back on to wake it up, it goes all berserk. I get these horizontal black and grey, monochromatic lines that pop up and move all around the screen. If it gets back, it kinda freezes on there, then the screen turns black again. I have to try to wake the phone back up and it keeps happening still. It's only after the fifth or sixth try that the screen still does it, but then my lock screen FINALLY comes up and I can unlock my phone. However, at times, this does not happen at all, not even a little bit. I'm stumped. i have reflashed my cyanogenmod that I had on it and it is running the latest because I thought maybe that was it, though I doubted it because I have two other mytouch's and a g1 that are running the same ROM and have no problem like that whatsoever. can anyone shed some light on this issue please. I would really appreciate it. I have been worrying over this all day trying to fix it to no avail. Once again, thank you for any help I get.
LOOOONNNNGGGG shot from a noob! Factory rest? pull the battery for 5 min? What vs of ROM r u running?
X-i-phoner said:
LOOOONNNNGGGG shot from a noob! Factory rest? pull the battery for 5 min? What vs of ROM r u running?
Click to expand...
Click to collapse
I did a wipe. Reformatted the memory card as well. I had cyanogen 4.0.1 then 4.0.2 and now 4.0.3 but had the same problem with all of them. Just havent pulled the battery but i doubt it will affect it.
Had the same issue when using a few of the Hero roms. would hit the button and the screen would flash some junk on the screen and then go back out. Had to hit the button about four times before it would finaly come back on. Have not had that problem with Cyanogen's though.
This is kind of a retarded question but its worth asking. Has the phone ever been wet? Have you takin into the bathroom while you shower? I have been thinking long and hard about disassembling my MyTouch just too see how its built (it still has a warranty, DAMN void stickers). Just by looking at the back with the cover off it is very suseptable to humitity. I do alot of phone repair and i have seen this problem many of times when there is corrosion on the flex cable. its only spazzes out when theres a sudden power surge. Have you tried a factory ROM
The MyTouch i use to flash roms on to "test" em out use to belong to a freind. She had droped it into her cranberry juice and vodka one night (I'm sure it was a great night). After disassembly to remove all the sugar before reboot i took a good long look. They are EXTRMELY easty to dissasemble and reassemble. about eight screws total for removing back cover and boards. Few connections. Give me a bit and I'll see if i can figure out how to post pics.
AS promised. sorry for the bad quality. By the way, After cleaning all the syrup from the boards with 91% rubbing alcohol, I have flashed it about 12 times looking for a good rom.
Hello all. First let me state that I rather not make a thread to ask help on a problem that seems to have happened to a few owners, but my knowledge as to how I could resolve the issue is severely lacking..
At some point today my phone was ringing but the screen would not show. I thought about taking the battery out and turning it back on but there would be no HTC, Bootanimation, anything. It was Just a black-lit screen which responds due to tactile feedback and the four touchkeys light up as usual. At first there was an odd sound that would play after a few minutes so I decided to charge it but again there was nothing. Even tried to access bootloader with -Vol and Power still no screen.
I asked a friend of mine to call my phone to see if it would ring but they said it instantly goes to voicemail as if my phone was off. Note that I WAS SURE IT WAS ON.
Adb seems to work with it as it seems whatever I need to do I have to do it through there.
G2 rooted with gfree method
CM7.1 RC1
Clockwork Recovery
Again i am sorry if I bothered those with posting something others would think is "too common of a problem" as I have no experience in fixing this issue. Plus I would like to try any option available as I would not like to try and have my phone replaced (because of the risk of discovering root and obtaining a G2 with stock gingerbread which is currently not rootable)
Please help..
It sounds like you're suffering from some sort of hardware failure. You need to send your phone in for repair/replacement.
The Unnamed Time Lord said:
Hello all. First let me state that I rather not make a thread to ask help on a problem that seems to have happened to a few owners, but my knowledge as to how I could resolve the issue is severely lacking..
At some point today my phone was ringing but the screen would not show. I thought about taking the battery out and turning it back on but there would be no HTC, Bootanimation, anything. It was Just a black-lit screen which responds due to tactile feedback and the four touchkeys light up as usual. At first there was an odd sound that would play after a few minutes so I decided to charge it but again there was nothing. Even tried to access bootloader with -Vol and Power still no screen.
I asked a friend of mine to call my phone to see if it would ring but they said it instantly goes to voicemail as if my phone was off. Note that I WAS SURE IT WAS ON.
Adb seems to work with it as it seems whatever I need to do I have to do it through there.
G2 rooted with gfree method
CM7.1 RC1
Clockwork Recovery
Again i am sorry if I bothered those with posting something others would think is "too common of a problem" as I have no experience in fixing this issue. Plus I would like to try any option available as I would not like to try and have my phone replaced (because of the risk of discovering root and obtaining a G2 with stock gingerbread which is currently not rootable)
Please help..
Click to expand...
Click to collapse
A. They don't care if its rooted.
B. You can root stock Gingerbread.
Same issue here...
I'm facing the same issue, when i try to unlock the phone (power button or trackpad) the screen lights but stays black, and the buttons are also backlit. I have to lock again with power button and unlock again to get to the actual screen.
It first happened a few days ago, and since i didn't reboot/restart in weeks i tried to reboot but the same issue comes back.
then i shut it down, pulled the battery and then back, and restarted: the phone goes directly to that black backlit screen, i tried several times and tried recovery with no luck, so i thought my phone was messed up although i did have some haptic feedback, well in fact the phone was actually booting, but just not showing anything else than the backlit screen; i waited a minute or so to the booting completes (still shows nothing), then i lock/unlock the screen again and there it is, asking for the pin code.
I tried to go to the recovery again to try to wipe dalvik-cache, i know for sure it goes to recovery, but with a totally black screen, not even backlit this time; the trackpad is too sensitive in the recovery to just blindly navigate in the menu, so it is not useable at all.
Then i had the idea to go to Rom Manager, i reflashed the rom from my sd-card, and enabling wipe dalvik-cache, which worked (all through a black screen). After a few minutes i "felt" it rebooting (vibrating) but still back to that black backlit screen, and i locked/unlocked it again and back it was asking pin code...
I also tried to roll back recovery to 3.0.2.4, since i remember i updated it a few weeks ago, but still the same issue.
I don't know what else to do without accessing the recovery, i wanted to try another kernel, or remove the trackpad wake... is there a way to do it via a script? I guess it's what Rom manager does...
Next step will be a total wipe, but i need to make some room on my sdcard for backup purposes first...
If anyone has an idea to sort this out, i'm highly interested...
I'll try to get a logcat, maybe could give a hint
Edit: Virtuous sense 2.0.0 (used it with no issue since it came out, could it be a hw issue?)
Edit2 : attached logcat
Is the pin screen differant than the usual one ie white number keys? If it is that's the sim lock screen you need to call the carrier to get the code or find out the default. Or just get a new sim lol
nah it's the 4 digit pin code, i didn't lose it btw, it's still working and i can use the phone, but i have a black backlit screen whenever i want to wake the phone, and thus when i receive a phone call, i don't know who it is and i blindly press/swipe the screen to answer, because if i want to use the same trick of locking /unlocking, it doesnt work as the lock button is also used to reject a call...
Maybe rip and reinstall the phone app?
asim0 said:
I'm facing the same issue, when i try to unlock the phone (power button or trackpad) the screen lights but stays black, and the buttons are also backlit. I have to lock again with power button and unlock again to get to the actual screen.
It first happened a few days ago, and since i didn't reboot/restart in weeks i tried to reboot but the same issue comes back.
Click to expand...
Click to collapse
I have the same exact problem as this EXCEPT, it's intermittent. Sometimes when I wake the phone I get an all black but backlight screen, and other times it's fine. I'm on CM7.1.
But a superwipe and reflash will probably fix it. Also don't restore system data on TB
I know i still can use wipe data + cache + dalvik through rom manager, and i always used to superwipe before switching roms, but how can i do that now when the recovery is all blacked out?
can anyone guide me to a script or something i could do while the phone is active, to tell him to reboot to recovery and flash that superwipe?
anyway i'll try the regular wipe and keep the thread updated
---------- Post added at 02:42 PM ---------- Previous post was at 02:35 PM ----------
SuperDave81 said:
EXCEPT, it's intermittent.
Click to expand...
Click to collapse
On my side if i leave the phone locked more than 30 seconds, it happens 100% of the time; also I noticed that now the backlight blinks 2 or 3 times (1 second blinking) when locked, first a few minutes after locking, and then randomly, about 3 or 4 times per hour; I guess it's getting worse;
I've read on another thread that it could be video cable getting loose, but since mine is still under guarantee, i won't open it right now just to check, if i can't fix by wiping / superwiping (when i know how to), i'll use that guarantee, which is one month left (lucky me)
EDIT: one other thing that makes me think it's no hardware, when the black screen appears because of a phone call or a message, the ringtone and notification sound are both half as loud as they should be, this is all really strange
after backing up my data, i reflashed the rom via Rom Manager, and I wiped data and cache (which equals to factory reset) this time: the first screen that should show the pin code numpad was already a black (backlit) screen!!
Also, thinking about it, i realised that the "flash rom from sdcard" menu in Rom Manager is in fact "Flash ZIP from sdcard": the zip doesn't have to be a ROM!!
So I tried flashing a new kernel this way, also some framework modifications (extended settings, removed TP wake, etc...) they all install Ok, but still this black screen...
Also I was about to flash SuperWipeG2.zip this way, but if it doesn't fix my problem, I will be stuck with a blacked out recovery, as SuperWipe wipes everything including /system; so if anyone has an idea to tell Rom Manager to flash two zips (Superwipe then Rom) i'll be willing to try, or a script to do that;
Maybe i'll have a look of the scripts in Superwipe and in the rom, and put both zips together... don't know if it's possible?
Maybe I'll try the Superwipe alone if I can get a spare phone, just in case...
Other thing:I used the phone's gps for more than 5 hours with the screen lit, and it never flickered even once; so it's hard to believe it's a screen connection issue...
Just to keep this updated, everything i did, including superwipe didn't change this issue, so i sent it back to the technical support (under guarantee) and I got it back today; the report that came with it says the screen has been replaced; so it was hardware finally...
Hi, i have same problem.. Black screen in recovery and during the boot. When the system boots, screen is OK. Sometimes i have also blackscreen when I want to use HW keyboard. I tried 4ext, reflash older versions of CW but still the same. I can see a screen through Android Screen Monitor and I can cotrol it. But phone is blak, only backlight. Can somebody say, how to solve this issue?
So, for other, if you cant see screen, you can use Android Screen Monitor for Windows and connect phone through USB and see a screen.
G1ForFun said:
A. They don't care if its rooted.
B. You can root stock Gingerbread.
Click to expand...
Click to collapse
WAIT one minute... they don't care? where was I when this meeting took place?
I had this issue as well on a spare G2 I had.
The screen was just black but you could tell it was lit, hardware keys were lit as well.
The phone was actually my brothers and it rooted w/ CM7.
I ended up selling the phone as is on Ebay but after some research it was a failure in the hardware for the screen and I found extensive instructions on how to replace it that I didn't wish to do.
I never attempted to get it replaced and kind of wish I did now if they don't care about the device being rooted.
I purchased my G2 before he had his, and it's never had the issue so not sure what to think of it.
Saintfyre said:
I ended up selling the phone as is on Ebay but after some research it was a failure in the hardware for the screen and I found extensive instructions on how to replace it that I didn't wish to do.
Click to expand...
Click to collapse
I think I have similar issue, can you post where you found those instructions?
Thanks in advance!
http://www.youtube.com/watch?v=u-dR8CHEGjY&feature=youtube_gdata_player
Sent from my HTC Vision using XDA Premium App
I used the same tutorial to change the LCD but after I put the new its just the backlight but nothing else... I will give it another go maybe and have a look again at those ribbon cables! I guess...
---------- Post added at 10:59 AM ---------- Previous post was at 10:09 AM ----------
I found on ebay: HTC-Desire-Z-T-Mobile-G2-A7272-Slide-Flex-Cable-Ribbon
or I found also with the chassis for a bit more.
Thinking to buy this, it would be great if anyone could confirm that it would help "my condition" ?
THanks in advance!
In terms of cables, yes the flex cables are what you want.
Sent from my T-Mobile G2
Hi guys. My almost brand new Samsung Galaxy S4 has just stopped working.
I was doing homework and one of my friends text me I look at the text and lock my phone screen and that was the last time I saw my screen working properly.
I later tried to turn on the screen but I had no luck, the screen wouldn't show anything, it was just blank but surprisingly it recognised my touch and made the sound. I could unlock my phone and even turn on apps by guessing where I kept them. I could turn on music and it would work but the screen would remain completely blank.
My phone was rooted and it had the stock rom but it had a custom kernel which enabled over clocking to 2.3 ghz (Ktweakers kernel I think) but the limit was set to 1.89 so I don't that that was the cause.
When I restart my phone the screen where it says "Samsung Galaxy S4 GT-I9505", I think its called the splash screen? I'm not sure, anyways instead of it being black with white writing, its really weird and is bright white with very light white writing. This is the only time the screen actually works, and the other time it works is when you try to put it into download mode but both times the screen is bright white and everything is very light and faded. After the "GT-I9505" screen goes away the screen goes black the blue LED still flashes and you can hear the samsung boot sound and the phone boots up properly without the screen.
What could be the cause of all this? I have literally kept this phone on top of my head. I have done nothing to harm it in any way what so ever. I have never dropped it. From day one I had a thick case incase I bumped it and damaged it. Anyone else having this problem? Or am I the only one? Do you guys think I'll be able to fix this or will I have to take it back to the store?
Thank you!
- Nafis A
*I will try to add a picture in a bit when I can get hold of a camera
NafisAhmed said:
Hi guys. My almost brand new Samsung Galaxy S4 has just stopped working.
I was doing homework and one of my friends text me I look at the text and lock my phone screen and that was the last time I saw my screen working properly.
I later tried to turn on the screen but I had no luck, the screen wouldn't show anything, it was just blank but surprisingly it recognised my touch and made the sound. I could unlock my phone and even turn on apps by guessing where I kept them. I could turn on music and it would work but the screen would remain completely blank.
My phone was rooted and it had the stock rom but it had a custom kernel which enabled over clocking to 2.3 ghz (Ktweakers kernel I think) but the limit was set to 1.89 so I don't that that was the cause.
When I restart my phone the screen where it says "Samsung Galaxy S4 GT-I9505", I think its called the splash screen? I'm not sure, anyways instead of it being black with white writing, its really weird and is bright white with very light white writing. This is the only time the screen actually works, and the other time it works is when you try to put it into download mode but both times the screen is bright white and everything is very light and faded. After the "GT-I9505" screen goes away the screen goes black the blue LED still flashes and you can hear the samsung boot sound and the phone boots up properly without the screen.
What could be the cause of all this? I have literally kept this phone on top of my head. I have done nothing to harm it in any way what so ever. I have never dropped it. From day one I had a thick case incase I bumped it and damaged it. Anyone else having this problem? Or am I the only one? Do you guys think I'll be able to fix this or will I have to take it back to the store?
Thank you!
- Nafis A
*I will try to add a picture in a bit when I can get hold of a camera
Click to expand...
Click to collapse
U can try to go to stock recovery and try to wipe cache and see if it boots up
If u have custom recovery wipe cache / dalvik/ fix permissn and reboot
else u should download a stock firmware and flash it using odin it will work incase even after u flash a firmware and again stuck at Logo etc go to stock recovery and wipe cache and reboot
123hiten said:
U can try to go to stock recovery and try to wipe cache and see if it boots up
If u have custom recovery wipe cache / dalvik/ fix permissn and reboot
else u should download a stock firmware and flash it using odin it will work incase even after u flash a firmware and again stuck at Logo etc go to stock recovery and wipe cache and reboot
Click to expand...
Click to collapse
Thank you for replying! I had cwm recovery installed but I reverted back to stock mod through odin. Now I am trying to wipe cache through stock recovery but the problem is that I can't see anything that I am doing. I am relying on pictures of the stock recovery. I know that my phone goes into recovery mode but it does not show anything on the screen. I am assuming I get stuck on the part where there are lots of no's and one yes.
Would It be possible if you could post a picture of that (The screen with all the no's and the one yes) because maybe then I can wipe the cache.
And I am already downloading the stock firmware, but it is taking forever because if the extremely slow internet. But the thing is that I don't see any logos, it boots fine but it doesn't show anything on the display. But I also know that the display is working because it still shows the "GT-I9505" screen. I'll post my progress here.
NafisAhmed said:
Thank you for replying! I had cwm recovery installed but I reverted back to stock mod through odin. Now I am trying to wipe cache through stock recovery but the problem is that I can't see anything that I am doing. I am relying on pictures of the stock recovery. I know that my phone goes into recovery mode but it does not show anything on the screen. I am assuming I get stuck on the part where there are lots of no's and one yes.
Would It be possible if you could post a picture of that (The screen with all the no's and the one yes) because maybe then I can wipe the cache.
And I am already downloading the stock firmware, but it is taking forever because if the extremely slow internet. But the thing is that I don't see any logos, it boots fine but it doesn't show anything on the display. But I also know that the display is working because it still shows the "GT-I9505" screen. I'll post my progress here.
Click to expand...
Click to collapse
I dont have a s4 with me now using htc one for while flash the firmware Stock one using Odin and wait for better result
123hiten said:
I dont have a s4 with me now using htc one for while flash the firmware Stock one using Odin and wait for better result
Click to expand...
Click to collapse
Okay so I downloaded the stock rom and flashed it with odin and it basically did nothing. Rather before flashing the stock rom, the splash screen would show (the screen that says "Samsung Galaxy S4 GT-i9505") but now it does not show anything. It turns on normally like it should, it makes the boot sound but does not show anything on the screen. If you have the lights turned off, you can see a flicker when it turns on and thats the only time the screen actually lights up. What do you think I should do? I still think it might be a software issue. Also I don't think I have warranty because I have flashed my phone a few times. Its still very upsetting that this has happened because honestly I haven't done anything to this phone.
- Nafis A
You steel have the garantee ? .. if you know what i mean
Sent from my GT-I9505 using xda app-developers app
karimdag said:
You steel have the garantee ? .. if you know what i mean
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
Haha no I don't think so Well I'm still taking it back to Singapore but I will probably have to pay for the repair.
Does your screen not have cracked (from the inside ) ?
MichelN said:
Does your screen not have cracked (from the inside ) ?
Click to expand...
Click to collapse
I don't think it does. Because before flashing stock rom, the splash screen would show and it had no cracks. So no actual damage, I still think it is a software issue but I don't know how to fix it :/ I still can't decide if I should take it to Samsung (which will take like a few months) or I can take it to a local repair shop and they can look at it which shouldn't take more than a week.
NafisAhmed said:
I don't think it does. Because before flashing stock rom, the splash screen would show and it had no cracks. So no actual damage, I still think it is a software issue but I don't know how to fix it :/ I still can't decide if I should take it to Samsung (which will take like a few months) or I can take it to a local repair shop and they can look at it which shouldn't take more than a week.
Click to expand...
Click to collapse
For repairs it takes 2 weeks before you get your device back (at least in my country)
MichelN said:
For repairs it takes 2 weeks before you get your device back (at least in my country)
Click to expand...
Click to collapse
Repairing it doesn't take very long, taking it to the repair centre will take time. I bought my phone from Singapore and I have to take it there if I want to get it repaired. I took it to the Samsung repair centre in Bangladesh, they said they can't repair my model because they don't support it here :/
NafisAhmed said:
Repairing it doesn't take very long, taking it to the repair centre will take time. I bought my phone from Singapore and I have to take it there if I want to get it repaired. I took it to the Samsung repair centre in Bangladesh, they said they can't repair my model because they don't support it here :/
Click to expand...
Click to collapse
The samsung centre here will send it to a repair centre. Here i will lose the phone for max. 2 weeks.
same problem
The same exact thing happened to me yesterday. Opened a text from a friend, tried turning on the screen and black screen. Thinking of sending it to samsung but do you have a solution yet? Was the problem diagnosed?
My Samsung galaxy s4 i9505 screen is dead--
I woke up this morning and my phone is still charging... But I cannot see my any data in the screen.. But my phone is still working.. I can receive phone call with my headset.. I cannot see anything in my screen.. It gone black.. Can anybody help me to fix this.. Or is this a firmware issue.. My phone has been rooted and installed official android 4.3 jellybean. Please help!!!
Just today I spend the same, except that the screen starts flashing, and at times the picture and the picture looked twice was very unstable, it restarts, and for the image of the i9505 without problem.
He ruled out a physical problem as it starts each. Device failure begins after displaying the Device Model
.
The touch and other features of the device, work perfectly. Try booting in recovery mode and I could not look very bad image.
In trying to backup my data with titanium to try to do a factory reset, began to regain normalcy. And right there my device works perfectly.
Bring 7 hours working normally my device. But I have fear of failing again. And now looking for information about possible solution. No warranty now.
What do you recommend? It's failure is becoming common. My device is doomed to die without remedy? Thank you very much for your answers in advance. Use translator apologies. Speak Spanish
hello guys, i got mine i9505 lte version 4 months ago. yesterday i pull it out of my pocket i tried to wake the device up but nothing .. just black screen just like the guys before me here. so today i opened the phone and pulled out and push it back the display connector... AND VOALA WORKS AGAIN! but after 5-10 minutes and everything is again black?! wtf i said!?! its not normal! my screen is working flawlessly colors touch response... everything! do i have to reconnect the display connector every time? i think its not normal. what must cause this bug/glitch/issue?!?!
i am rooted with cwm and cyanogenmod 11... i dont think its caused by the rom? what do you think guys? give me suggestion before i try to demolish the phuking fone))
radibg said:
hello guys, i got mine i9505 lte version 4 months ago. yesterday i pull it out of my pocket i tried to wake the device up but nothing .. just black screen just like the guys before me here. so today i opened the phone and pulled out and push it back the display connector... AND VOALA WORKS AGAIN! but after 5-10 minutes and everything is again black?! wtf i said!?! its not normal! my screen is working flawlessly colors touch response... everything! do i have to reconnect the display connector every time? i think its not normal. what must cause this bug/glitch/issue?!?!
i am rooted with cwm and cyanogenmod 11... i dont think its caused by the rom? what do you think guys? give me suggestion before i try to demolish the phuking fone))
Click to expand...
Click to collapse
Hello Guys, this issues is very common when you rooted the device and install Wanam Xposed.
You can try flash a stock Rom and stock Kernel with odin, try to swipe cache and dalvin using ADB.
Good Luck!
I've had this Motorola Droid RAZR for like two years now and a friend of mine took it and worked on it, adding something called "Cyanogen Mod" and he 'rooted' it I believe? Ever since, phone has worked great. However, today I tapped the home button and the whole screen had a weird visual glitch where the wallpaper was entirely intact but the icons and such were only half appearing, like someone scratched them out with fingernails or something. It would go away and come back so I got frustrated and rebooted my phone. It starts up normally and goes to this screen where you can do different stuff with Cyanogen mod (like changing the rom? or changing boot options) and usually I just continue past that because for 1) I know nothing about it and 2) It always was fine. But when it did the typical boot up, it just skipped back to the first screen you get when you turn the phone on and repeats. It never goes to the second part of the Cyanogen Mod where the words appear and the little thing spins, it simply skips back to the screen you get when you power up and repeats. It keeps doing this and I looked online how to fix it, tried about twelve different things (like restoring different aspects and using different roms or making new roms) and it just didn't work. Eventually it got bugged out where the screen was just black, couldn't get it to do anything but reboot and go back to black. I let it sit until the battery ran dry I believe and now I'm at a brick wall.
Is there a way I can totally just revamp and start fresh? Like remove all of it and reinstall Cyanogen mod/the OS and all that jazz? I don't mind losing everything if I can just keep the phone, I don't pay for a cellphone and I don't want one I just use the droid for texting apps/games/reddit/etc. If anyone could help me save this thing I'd appreciate it.
Hi there,
Please stand by until mods will move this thread to the related forum for Droid RAZR.
For reply or ask other questions you must register an account.
Stand by
Hello? Can Somebody help me out, I've waited a couple days now and no one has said a thing?
You have safestrap installed, correct? If so, what version?
Dr. Mario said:
You have safestrap installed, correct? If so, what version?
Click to expand...
Click to collapse
How would I know if I had it installed? I remember when I booted up the phone something came on with a picture of a little robot that said "Safestrap Enabled" and then when I had this problem it was saying "Safestrap Disabled". I can't get the phone to turn on right now though, is there a way I can check what version I have another way?
Ah. I see. First. try entering Safestrap menu upon rebooting, instead of allowing it to boot normally, and look at ROM slot and see if custom OS' ROM slot is active. If it's there and is not active try reactivate it. If it won't budge, get microSD card and find XT910 (RAZR - spyder) CM 11. If you don't know what to pick, I will look in a bit.
Dr. Mario said:
Ah. I see. First. try entering Safestrap menu upon rebooting, instead of allowing it to boot normally, and look at ROM slot and see if custom OS' ROM slot is active. If it's there and is not active try reactivate it. If it won't budge, get microSD card and find XT910 (RAZR - spyder) CM 11. If you don't know what to pick, I will look in a bit.
Click to expand...
Click to collapse
Just tried booting it up, nothing is working I think the phone is dead. I plug it into the charger and only the notification light on the top left goes on a blueish white and stays on as long as it is plugged into the charger. Nothing will turn on at all and the phone doesn't seem to respond to anything. Is my phone just dead..?
Soft bricked. Try pushing both volume down and up button while plugged into either computer or charger, and hold down power button until it boots. I hope you won't need to buy Motorola factory cable at this point.
Let your device charge for a few hours until it boots up. Then boot it into APfastboot and flash the stock firmware with RSDLite.
ATTACK said:
Let your device charge for a few hours until it boots up. Then boot it into APfastboot and flash the stock firmware with RSDLite.
Click to expand...
Click to collapse
In English please?
Edit: Just plugged it in like you said and instantly the boot screen came on rather than simply that silly light so I think my phone is improving but I still would like to entirely revamp it or redo it or whatever you wanna call it so that everything is fresh and new and my phone is okay.
Good. I think it could be because the battery died somehow. Good thing the protection mechanism on the bootloader didn't have the wild idea of disabling the phone.
I've had a VS995 for about two months. One of the first things I did when I got it was root(dirty santa) and install custom firmware. After doing this I noticed that watching any type of video on the phone would lag extremly bad (<10 fps), unless I held my finger on the screen, and I would get different screen glitches (turn black, turn all static, half and half, etc). I then decided to go back to stock so I flashed a stock KDZ with lgup. This didn't fix the problem. After several weeks of putting up with it, It's gotten to the point where the phone is unusable. It freezes constantly. To get the screen to unfreeze I have to lock then unlock the screen, and half the time it freezes again instantly. Attempting to watch a video (or even a GIF) stutters and chokes after 1-2s and turns the whole screen into static.
At first I was thinking something might be corrupted so today I re-rooted but once I tried to get into twrp the screen kept turning to static. So I flashed back to stock KDZ with no change in performance. Also I can not boot into recovery or fastboot, I've tried several times. Does KDZ upgrade also flash the bootloader?
I'm starting to think it might be something bad on the main board, has anyone ever reflowed one?
I bought the phone used online and it only came with a 30 day warrenty, so no luck there.
Any input would be greatly appreciated.
Thank you
SmokeyMP said:
I've had a VS995 for about two months. One of the first things I did when I got it was root(dirty santa) and install custom firmware. After doing this I noticed that watching any type of video on the phone would lag extremly bad (<10 fps), unless I held my finger on the screen, and I would get different screen glitches (turn black, turn all static, half and half, etc). I then decided to go back to stock so I flashed a stock KDZ with lgup. This didn't fix the problem. After several weeks of putting up with it, It's gotten to the point where the phone is unusable. It freezes constantly. To get the screen to unfreeze I have to lock then unlock the screen, and half the time it freezes again instantly. Attempting to watch a video (or even a GIF) stutters and chokes after 1-2s and turns the whole screen into static.
At first I was thinking something might be corrupted so today I re-rooted but once I tried to get into twrp the screen kept turning to static. So I flashed back to stock KDZ with no change in performance. Also I can not boot into recovery or fastboot, I've tried several times. Does KDZ upgrade also flash the bootloader?
I'm starting to think it might be something bad on the main board, has anyone ever reflowed one?
I bought the phone used online and it only came with a 30 day warrenty, so no luck there.
Any input would be greatly appreciated.
Thank you
Click to expand...
Click to collapse
Yes upgrade in lgup flashes EVERYthing, bootloader, modem, recovery, even the download mode partition. Have to use partition dl mode to be picky (needs the modified lg up files from the mismatched variant thread). The static screen sounds like you need a custom kernel or a new twrp, depending on where its occuring (its related to the dirtysanta bootloader and theres workarounds to fix it builtinto custom kernels and recent twrp)
It's prolly water damage. My V20 was doing exactly the same thing after rooting. I opened the phone and noticed the LCD plug to the Mobo had corrosion on it, I unplugged the LCD from the Mobo and got a clean cheap brand new toothbrush and gently brushed and blew debris off then followed with cleaning with a ear Qtip with a bit of alcohol. Check the seal around the LCD and make sure any gaps are closed with slices of clear tape. I don't know how rooting messed up my phone, it's something strange with resetting the phone, the glitches kicked in from the corrosion on the gold parts. After my first boot from cleaning, my phone was totally normal again. A month later I got screen retention..... Lol but that's a whole other Obvious story everybody shares and knows about lol. I hope you get your situation solved.