Seeking best advice - Verizon Galaxy Note 3 Q&A, Help & Troubleshooting

I just recently purchased a Verizon Note 3 and would like some takeoff advice with this device. It came loaded with JB 4.3 and MJE baseband. I would like to upgrade the present stock JB 4.3 to KK 4.4.2 utilizing the best tools for the job. With root, a new recovery, and a reliable wifi hotspot apk too. I have found that it helps to get advice from an experienced user before potentially taking a wrong first step in unknown territory... Been there, done that.

Lexus One said:
I just recently purchased a Verizon Note 3 and would like some takeoff advice with this device. It came loaded with JB 4.3 and MJE baseband. I would like to upgrade the present stock JB 4.3 to KK 4.4.2 utilizing the best tools for the job. With root, a new recovery, and a reliable wifi hotspot apk too. I have found that it helps to get advice from an experienced user before potentially taking a wrong first step in unknown territory... Been there, done that.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2543386
This is the method I used it worked perfectly, I came from sprint sammy GS3 so this was a bit different but its great now! if you go under your devices and go to the android development forum you will see how to update to 4.4.2 after you obtain your 4.3 root with safestrap. this is the safest method so follow the link i posted and you should have no problems:good: also if you miss the aosp feel the eclipse rom is amazing..Good Luck
---------- Post added at 06:11 PM ---------- Previous post was at 06:08 PM ----------
Lexus One said:
I just recently purchased a Verizon Note 3 and would like some takeoff advice with this device. It came loaded with JB 4.3 and MJE baseband. I would like to upgrade the present stock JB 4.3 to KK 4.4.2 utilizing the best tools for the job. With root, a new recovery, and a reliable wifi hotspot apk too. I have found that it helps to get advice from an experienced user before potentially taking a wrong first step in unknown territory... Been there, done that.
Click to expand...
Click to collapse
Oh also I stayed on the NC2 firmware when I went to kit kat from what I gathered in research its better than the NC4 for now

More importantly, is there anything that I MUST do while running JB4.3 that I can't do afterwards on 4.4.2? Like root with survival mode or something? Otherwise (from JB4.3) it looks like I could just install the OTA to 4.4.2 NC4 ... run Towelroot, install busybox, and then SafeStrap 3.72. So, is this a good or bad idea ???

Lexus One said:
More importantly, is there anything that I MUST do while running JB4.3 that I can't do afterwards on 4.4.2? Like root with survival mode or something? Otherwise (from JB4.3) it looks like I could just install the OTA to 4.4.2 NC4 ... run Towelroot, install busybox, and then SafeStrap 3.72. So, is this a good or bad idea ???
Click to expand...
Click to collapse
There is nothing special you need to do while on 4.3. You can do just as you said but you also need to install SuperUser.

Update, run the alpha root, install busybox, su, and safestrap. Download your ROM and flash it on the stock slot.
Sent from my SM-N900V using Tapatalk

leyvatron said:
Update, run the alpha root, install busybox, su, and safestrap. Download your ROM and flash it on the stock slot.
Click to expand...
Click to collapse
Could you help me find the "alpha root" method? I don't see it anywhere.

Lexus One said:
Could you help me find the "alpha root" method? I don't see it anywhere.
Click to expand...
Click to collapse
its not called alpha. [emoji12]
http://towelroot.com/
Sent from my SM-N900V using Tapatalk

I've been doing some reading in various places and have noticed that there are a good many people complaining about the 4.4.2 upgrade. Things like reception and battery issues...and the list goes on. They basically are saying that things were better before the update.
Would it be better (less problems overall) to upgrade via odin to 4.4.2 NC4...or just take the OTA route from the retail version 4.3 MJE...or should I stay on 4.3 and put up with the alleged GPS headaches...and bypass all the reception and battery issues?

Lexus One said:
I've been doing some reading in various places and have noticed that there are a good many people complaining about the 4.4.2 upgrade. Things like reception and battery issues...and the list goes on. They basically are saying that things were better before the update.
Would it be better (less problems overall) to upgrade via odin to 4.4.2 NC4...or just take the OTA route from the retail version 4.3 MJE...or should I stay on 4.3 and put up with the alleged GPS headaches...and bypass all the reception and battery issues?
Click to expand...
Click to collapse
Don't use the NC4 Odin or the OTA, root MJE then install a 4.4.2 ROM. That way you have the ability to go back to MJE if you want to, you can also try the different modems once you're on NC4 and find the one that works best for you.

airmaxx23 said:
Don't use the NC4 Odin or the OTA, root MJE then install a 4.4.2 ROM. That way you have the ability to go back to MJE if you want to, you can also try the different modems once you're on NC4 and find the one that works best for you.
Click to expand...
Click to collapse
Thanks airmaxx, but I thought I read that I could use odin to go back if I wanted to after rooting the OTA NC4 with towelroot. Besides, if there are problems (as I've read) with 4.4.2 NC4, then it would make more sense not to upgrade at all. Or is NC4 really that much better even with the poorer reception and battery issues? Now I'm wondering what makes the NC4 upgrade worth the time and effort. Thanks again for your thoughts.

Lexus One said:
Thanks airmaxx, but I thought I read that I could use odin to go back if I wanted to after rooting the OTA NC4 with towelroot. Besides, if there are problems (as I've read) with 4.4.2 NC4, then it would make more sense not to upgrade at all. Or is NC4 really that much better even with the poorer reception and battery issues? Now I'm wondering what makes the NC4 upgrade worth the time and effort. Thanks again for your thoughts.
Click to expand...
Click to collapse
You can downgrade from 4.4.2 (NC4) if you root MJE and install a pre-rooted version (ROM). The OTA and NC4 tar file have a different bootloader which prevents downgrading. I've had no problems with battery or signal on NC4, keep in mind that people usually post when they have problems but rarely pay when things are working fine.

airmaxx23 said:
You can downgrade from 4.4.2 (NC4) if you root MJE and install a pre-rooted version (ROM). The OTA and NC4 tar file have a different bootloader which prevents downgrading. I've had no problems with battery or signal on NC4, keep in mind that people usually post when they have problems but rarely pay when things are working fine.
Click to expand...
Click to collapse
Now that is good to know. Thanks. So I can assume that the bootloader from retail 4.3 MJE is what I want to keep...even if I move to a 4.4.2 NC2 or NC4 rom?

Lexus One said:
Now that is good to know. Thanks. So I can assume that the bootloader from retail 4.3 MJE is what I want to keep...even if I move to a 4.4.2 NC2 or NC4 rom?
Click to expand...
Click to collapse
The NC2 bootloader is really the one to be on. The basic steps can be found in the install instructions in this ROM thread, you can use any ROM, it doesn't have to be Jasmine. Just use steps 1-12. More detailed instructions can be found in this thread but use the Odin files from the first thread.

Related

Retaining root from MF3 to 4.3?

Hey guys, I've done a lot of searching in this forum and found a lot of conflicting answers, so decided to start a fresh thread. I've been on 4.2.2/MF3 for a while now running Safetrap. I'm looking to take the OTA from AT&T and upgrade to 4.3.
I havent seen any root methods for 4.3 yet, but the question is, can I upgrade to 4.3 and retain root if I am running the latest version of SuperSU Pro with survival mode enabled?
A custom recovery with the option for installing ROMs is not needed, especially since I havent been able to do that since I updated to MF3. All I need is to keep root under 4.3 and I'll be more than happy, thanks!
kevinco1 said:
Hey guys, I've done a lot of searching in this forum and found a lot of conflicting answers, so decided to start a fresh thread. I've been on 4.2.2/MF3 for a while now running Safetrap. I'm looking to take the OTA from AT&T and upgrade to 4.3.
I havent seen any root methods for 4.3 yet, but the question is, can I upgrade to 4.3 and retain root if I am running the latest version of SuperSU Pro with survival mode enabled?
A custom recovery with the option for installing ROMs is not needed, especially since I havent been able to do that since I updated to MF3. All I need is to keep root under 4.3 and I'll be more than happy, thanks!
Click to expand...
Click to collapse
This is my exact question. I just need some concrete answer as to yes or no... but as you said way too many conflicting answers!
YES.
I used "Survival mode" and it worked for me.
ROOTED ATT MK2 using Tapatalk
Hi so there is a way to update stock to 4.3 and continue using safestrap to run 4.2.2 roms????I would doubt that with what Ive read so far.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
jball said:
YES.
I used "Survival mode" and it worked for me.
Click to expand...
Click to collapse
I too can confirm this works using Survival Mode from SuperSU Pro (https://play.google.com/store/apps/details?id=eu.chainfire.supersu.pro&hl=en).
Now, that being said, being a very big noob myself (switching over from heavily tweaked jailbroken iPhone 5), I did this, all was well, I thought I had some issues with some apps and thought 'hmm... maybe I'll just downgrade to MF3 and see if the problem is fixed'. Yeah, attempting to do that with Odin has left me soft-bricked, but for all intents and purposes (that I can tell) it's actually hard-bricked 'cause Kies did nothing, Odin does nothing, if I understand things correctly the only thing that could possibly help is if we had the MD5's available to us for MK2, which, my searching is coming up empty. So, point is according to what I can tell, if you go MK2, there is NO going back to 4.2.2, so use caution.
So just an important safety tip there (unless someone wants to correct my noobness).
Yes. I can confirm that enabling "survival mode" in SuperSU and updating will keep your root; i did this on my pphone coming from MF3.
However, with that being said, i quickly unrooted from there because i had issues with MMS/messaging and phone calls not being recieved, and i did not want to reset my phone. If you run into similar issues as i am not the only one reporting those issues you can so a reset on your data (your root will not be affected, you will be rooted after the reset) or an unroot will work.
happy updating
kevinco1 said:
Hey guys, I've done a lot of searching in this forum and found a lot of conflicting answers, so decided to start a fresh thread. I've been on 4.2.2/MF3 for a while now running Safetrap. I'm looking to take the OTA from AT&T and upgrade to 4.3.
I havent seen any root methods for 4.3 yet, but the question is, can I upgrade to 4.3 and retain root if I am running the latest version of SuperSU Pro with survival mode enabled?
A custom recovery with the option for installing ROMs is not needed, especially since I havent been able to do that since I updated to MF3. All I need is to keep root under 4.3 and I'll be more than happy, thanks!
Click to expand...
Click to collapse
First with Safestrap you CAN flash Roms. It is just limited to about 10 or so Roms that will work as they need to be 4.2.2 based.
Now with that said for those that ONLY want root on MK2 then someone in the Verizon thread has a WORKING ROOT available for MK2 4.3 firmware here http://forum.xda-developers.com/showthread.php?t=2565758 and it DOESN'T come with the maliscious code that Kango and VRoot does. This DOES NOT give you recovery but it does give root. So thank the OP in that thread for helping out the community. I did and I HOPE I will never need to use it!!!
Good luck and Happy Rooting...
Sent From My Spiderman,Ironman,Red,Dark Blue,Green, GreyedOut BadAss Themed I337

MJ7 to MJE help

Hi, already rooted, and have been running cleanrom on my MJ7 N3 for awhile now, and I see that many of the newer roms require MJE.
What would be the easist way to update to MJE, and could I just flash a MJE rom anyways?
(also I have deleted the stock rom for more space, worst case I'll odin back to stock, just wondering if there is a faster way than going back to stock, updating, then installing another custom rom.)
brex91 said:
Hi, already rooted, and have been running cleanrom on my MJ7 N3 for awhile now, and I see that many of the newer roms require MJE.
What would be the easist way to update to MJE, and could I just flash a MJE rom anyways?
(also I have deleted the stock rom for more space, worst case I'll odin back to stock, just wondering if there is a faster way than going back to stock, updating, then installing another custom rom.)
Click to expand...
Click to collapse
You CAN flash MJE roms but you'll likely have wifi and signal issues. SOme have done it and worked around the issues.
Use Odin to flash MJE tar is best way to get to MJE. If Kingo is still slow, use Vroot.
For any help or links, check Note 3 link in my sig
OTA Survival?
az_biker said:
You CAN flash MJE roms but you'll likely have wifi and signal issues. SOme have done it and worked around the issues.
Use Odin to flash MJE tar is best way to get to MJE. If Kingo is still slow, use Vroot.
For any help or links, check Note 3 link in my sig
Click to expand...
Click to collapse
Using paid version of SuperSU 1.93, (updated binaries) will it survive OTA? from MJ7 to MJE?
Mr. HQ said:
Using paid version of SuperSU 1.93, (updated binaries) will it survive OTA? from MJ7 to MJE?
Click to expand...
Click to collapse
The results are kinda split on this. Some have said they survived OTA and many have said they lost root and had to Odin MJE anyway.
I usually tell folks to just Odin MJE and that way you only have to flash MJE ONCE

root and safestrap ?,?

I am about to buy a used verizon note 3 its running 4.5 can this version be rooted and safestrapped to run custom roms? ??
Anyone know if this phone with version 4.5 android can be rooted and use safestrap so I can run custom roms
DizzyFox said:
Anyone know if this phone with version 4.5 android can be rooted and use safestrap so I can run custom roms
Click to expand...
Click to collapse
Android 4.3, yes safestrap and root will work. I think 4.5 must be a typo. Try rooting with Kingo or Vroot.
I would also double check what version of JellyBean the device is running. Also, what is the Baseband version? Is it: MI9, MJ7 or MJE?
Misterxtc said:
Android 4.3, yes safestrap and root will work. I think 4.5 must be a typo. Try rooting with Kingo or Vroot.
Click to expand...
Click to collapse
I'm sorry it was 4.3 which do you think is better progam to root with
Kingo seems to be more safe but no problems have been reported with either. I have used both with no problems. So if Kingo dose not work for you use Vroot and then replace the Chinese superuser with Chainfires supersu.
tw1n5nak35 said:
I woversionalso double check what version of JellyBean the device is running. Also, what is the Baseband version? Is it: MI9, MJ7 or MJE?
Click to expand...
Click to collapse
ok so it matters what baseband version its running when you root and safestrap it?
DizzyFox said:
ok so it matters what baseband version its running when you root and safestrap it?
Click to expand...
Click to collapse
It's for the radio's and modem. If it's updated to MJE, then you will just have to root, install safestrap and flash roms. But if you want to run the latest and greatest of the best rom's, the devs recommend that you be on the updated baseband MJE.
As suppose to if the phone is MI9 or MJ7, you can stay on that baseband or you can ODIN and update to MJE.
Your mileage may very. I've seen users who have updated and have tethering, wifi and gps issues. Some who have updated do not have these issues on the updated baseband and users like me who are on MI9 have not experienced any of these and decided to stay on the default baseband.
If you decide to go ahead and purchase the phone, here is a link with better info on how to ODIN and update baseband, coming from either MI9 or MJ7 and updating to MJE. Best of luck, hopefully you can get the phone, root, install safestrap, flash the roms that you like and happy testing. Here is the link
http://forum.xda-developers.com/showthread.php?t=2528707
tw1n5nak35 said:
It's for the radio's and modem. If it's updated to MJE, then you will just have to root, install safestrap and flash roms. But if you want to run the latest and greatest of the best rom's, the devs recommend that you be on the updated baseband MJE.
As suppose to if the phone is MI9 or MJ7, you can stay on that baseband or you can ODIN and update to MJE.
Your mileage may very. I've seen users who have updated and have tethering, wifi and gps issues. Some who have updated do not have these issues on the updated baseband and users like me who are on MI9 have not experienced any of these and decided to stay on the default baseband.
If you decide to go ahead and purchase the phone, here is a link with better info on how to ODIN and update baseband, coming from either MI9 or MJ7 and updating to MJE. Best of luck, hopefully you can get the phone, root, install safestrap, flash the roms that you like and happy testing. Here is the link
http://forum.xda-developers.com/showthread.php?t=2528707
Click to expand...
Click to collapse
Thanks this has been great information.
DizzyFox said:
Thanks this has been great information.
Click to expand...
Click to collapse
Your welcome

Difference of NC4

Apology if I sound like a noob, but the more I read the more confused I get. What is the difference between these two scenarios? Which one is preferred?
1. Take OTA all the way to NC4, use Towrlroot.
2. From any rooted rom, flash Beanstown NC4 ROM and ODIN updated NC2 firmware.
openwheelracing said:
Apology if I sound like a noob, but the more I read the more confused I get. What is the difference between these two scenarios? Which one is preferred?
1. Take OTA all the way to NC4, use Towrlroot.
2. From any rooted rom, flash Beanstown NC4 ROM and ODIN updated NC2 firmware.
Click to expand...
Click to collapse
You don't want to take the official OTA for NC4 if you haven't. Although it can be rooted - you can't roll back from it to other firmwares. NC2 is supposed to be the best as far as being able to make modifications to your phone from what I understand.
Having said that I am on official NC4. I used to really enjoy flashing roms but as of late I do not find that they offer much advantage - and often times are more buggy than the stock firmware.
Thank you for the reply. So I am on Beanstowns latest NC4 ROM with NC2 firmware. I was curious if this setup may be less optimal than 100% NC4. I don't like to flash ROMs, I just need to be rooted with Wanam Xposed
openwheelracing said:
Thank you for the reply. So I am on Beanstowns latest NC4 ROM with NC2 firmware. I was curious if this setup may be less optimal than 100% NC4. I don't like to flash ROMs, I just need to be rooted with Wanam Xposed
Click to expand...
Click to collapse
Well that is your call. The guys that like flashing roms swear you should stay on NC2. I personally just grew out of it after 5 years of this stuff. I'm on stock unrooted NC4. But I did root NC4 with TowelRoot. And then I Odined back to stock unrooted. I did not however try to install Xposed or the Wanam module. So you may want to check into that before you make the leap. I've never been on NC2 so I can't really make a comparison to which firmware runs better. But my guess is since they did not release NC2, but created and released NC4 - that it is better than NC2. But then again, it may just be that they patched the exploits in NC2 and called that release NC4.
Is Wanam pretty awesome? I have heard some pretty good stuff about it. If I do test it out I'll report back here.
thepolishguy;53612317
Is Wanam pretty awesome? I have heard some pretty good stuff about it. If I do test it out I'll report back here.[/QUOTE said:
Wanam covers pretty much everything that I would want out of a custom ROM. I like stock android, I don't need a total replacement. I just want to be able to tweak the little nags, and Wanam covers just about all of them. The ones that can't be done through Wanam can be done through other means. In the end, I basically have my own custom ROM, but tailored to my tastes and not someone else's.
Click to expand...
Click to collapse

[Q] Proper Rooting and SafeStrap Process NC4

Okay so I've been browsing through the forums and been reading up on this phone (even contacted Samsung about info on unlocking the bootloader, no go on that. Had to try though)
Basically I want to know what's the proper procedure for installing custom roms on an NC4 device 4.4.2
Things I know:
Bootloader is unlockable at the moment (hoping for some good news in the future)
Towelroot for rooting
Safestrap for recovery
(Both just download and install the apk)
Things I don't know:
Kernel?
Somebody said I had to flash the NC2 kernel via Odin?
Knox?
What is this? What trips it?
I did see the list of guides and I did read and watch all the necessary ones, but the date on those are from 2 years ago and I just need confirmation on if I'm going about this right.
Any help is appreciated. I thank you in advance for taking the time to read this.
Please excuse my lack of knowledge, this is my first Samsung device.
Also, what would happen if somebody were to flash the DE stock files via Odin to a Retail N3?
If you upgraded to NC4 or NK1, you're stuck until Samsung unlocks the bootloader or Verizon stops lying to their customers. There is no root available after upgrade at this moment in time.
Dravekx said:
If you upgraded to NC4 or NK1, you're stuck until Samsung unlocks the bootloader or Verizon stops lying to their customers. There is no root available after upgrade at this moment in time.
Click to expand...
Click to collapse
I didn't upgrade to NC4, it came like this.
rdar_93 said:
I didn't upgrade to NC4, it came like this.
Click to expand...
Click to collapse
That sucks. You can't do anything about it at the moment. I was forced to upgrade and lost root. Custom ROMs won't be available to you or me until someone finds a hole to unlock the bootloader. Welcome to our Verizon Note 3 rooting dilemma.
mirrin said:
You do not have a dev version so cm 11 or 12 is a far off dream you won't get. Your bootloader is locked there is no unlock.
You are in luck nc4 is root able using towel root then safe strap and the unified firmware. You will need odin and a pc for flashing a few things the NK1 modem towel root and the unified firmware. Pick a rom from the development thread i suggest jasmine 1.x or eclipse.
Click to expand...
Click to collapse
Copied from another post I had.
I don't know much about the device which is why I'm trying to find out.
Dravekx said:
That sucks. You can't do anything about it at the moment. I was forced to upgrade and lost root. Custom ROMs won't be available to you or me until someone finds a hole to unlock the bootloader. Welcome to our Verizon Note 3 rooting dilemma.
Click to expand...
Click to collapse
I actually just got root on my phone, I felt adventurous and installed towelroot and voila it rooted my phone.
I should state that I'm on 4.4.2, not 4.4.4.
Checked root status with Titanium Backup Pro, everything checked out a-okay.
rdar_93 said:
Okay so I've been browsing through the forums and been reading up on this phone (even contacted Samsung about info on unlocking the bootloader, no go on that. Had to try though)
Basically I want to know what's the proper procedure for installing custom roms on an NC4 device 4.4.2
Things I know:
Bootloader is unlockable at the moment (hoping for some good news in the future)
Towelroot for rooting
Safestrap for recovery
(Both just download and install the apk)
Things I don't know:
Kernel?
Somebody said I had to flash the NC2 kernel via Odin?
Knox?
What is this? What trips it?
I did see the list of guides and I did read and watch all the necessary ones, but the date on those are from 2 years ago and I just need confirmation on if I'm going about this right.
Any help is appreciated. I thank you in advance for taking the time to read this.
Please excuse my lack of knowledge, this is my first Samsung device.
Also, what would happen if somebody were to flash the DE stock files via Odin to a Retail N3?
Click to expand...
Click to collapse
Ahhhh... You're good to go then! Find a good custom ROM and follow the instructions. Whatever you do.. Don't upgrade!
rdar_93 said:
I actually just got root on my phone, I felt adventurous and installed towelroot and voila it rooted my phone.
I should state that I'm on 4.4.2, not 4.4.4.
Checked root status with Titanium Backup Pro, everything checked out a-okay.
Click to expand...
Click to collapse
Dravekx said:
Ahhhh... You're good to go then! Find a good custom ROM and follow the instructions. Whatever you do.. Don't upgrade!
Click to expand...
Click to collapse
Lol I still need clarification on the Kernel information that I don't know about.
What do I need to flash?
Do I flash it after I install a custom rom or before?
rdar_93 said:
Lol I still need clarification on the Kernel information that I don't know about.
What do I need to flash?
Do I flash it after I install a custom rom or before?
Click to expand...
Click to collapse
My opinion: If you're doing a custom kernel, make sure it works with whatever ROM you're flashing. I suggest sticking with the stock kernel* until you get the hang of things OR do a little research and learn a bit before you attempt anything. There's a lot of forums with details and help here. I've installed kernels before and after installing ROMs with little or zero problems, but I'm more of a dabbler than a professional.
I would suggest backing up your current setup in case you need to reflash. That's a definite.
Dravekx said:
My opinion: If you're doing a custom kernel, make sure it works with whatever ROM you're flashing. I suggest sticking with the stock kernel* until you get the hang of things OR do a little research and learn a bit before you attempt anything. There's a lot of forums with details and help here. I've installed kernels before and after installing ROMs with little or zero problems, but I'm more of a dabbler than a professional.
I would suggest backing up your current setup in case you need to reflash. That's a definite.
Click to expand...
Click to collapse
Lol that doesn't really answer the question. I hope somebody sees it and clears it up for me
rdar_93 said:
Lol that doesn't really answer the question. I hope somebody sees it and clears it up for me
Click to expand...
Click to collapse
The kernel can't be changed...although it can be "tuned" if you have root.
http://forum.xda-developers.com/showthread.php?p=58813428
Sent from my Note 3 via Tapatalk
Still hoping somebody helps me out and posts a short but precise guide to install a custom rom on 4.4.2 NC4
I don't want to end up bricking my device on the first try. I've been there already and it sucks lol
rdar_93 said:
Still hoping somebody helps me out and posts a short but precise guide to install a custom rom on 4.4.2 NC4
I don't want to end up bricking my device on the first try. I've been there already and it sucks lol
Click to expand...
Click to collapse
It really depends on the ROM, there is no set guide for all ROMs.
Did you install busybox? I like using busybox on rails. Just download the app and click install.
Download the safestrap apk (3.75 B04) and install that, open it and install recovery.
I'm currently running Clean ROM. I am on NC4. I downloaded the rom, and moved it to my SD card. I rebooted to safestrap, wiped data, cache and dalvik then installed the ROM to the stock slot. Then, following the instructions for Clean ROM, I rebooted to download mode from recovery and flashed the NC2 Kernel with odin.
The main thing is to read the installation instructions for the particular ROM you want to flash.
Don't forget to use Titanium backup to freeze SDM app (I think that's what its called) so your phone will stop trying to update.
---------- Post added at 05:29 PM ---------- Previous post was at 05:23 PM ----------
rdar_93 said:
Still hoping somebody helps me out and posts a short but precise guide to install a custom rom on 4.4.2 NC4
I don't want to end up bricking my device on the first try. I've been there already and it sucks lol
Click to expand...
Click to collapse
If you're at all proficient with Odin it is really REALLY hard to brick these phones.
BladeRunner said:
It really depends on the ROM, there is no set guide for all ROMs.
Did you install busybox? I like using busybox on rails. Just download the app and click install.
Download the safestrap apk (3.75 B04) and install that, open it and install recovery.
I'm currently running Clean ROM. I am on NC4. I downloaded the rom, and moved it to my SD card. I rebooted to safestrap, wiped data, cache and dalvik then installed the ROM to the stock slot. Then, following the instructions for Clean ROM, I rebooted to download mode from recovery and flashed the NC2 Kernel with odin.
The main thing is to read the installation instructions for the particular ROM you want to flash.
Don't forget to use Titanium backup to freeze SDM app (I think that's what its called) so your phone will stop trying to update.
---------- Post added at 05:29 PM ---------- Previous post was at 05:23 PM ----------
If you're at all proficient with Odin it is really REALLY hard to brick these phones.
Click to expand...
Click to collapse
Thanks man, I was supposed to update this thread saying that I got through with the proper procedure for installing Jasmine Rom
Although I was running Eclipse before, and I wanted to try going back to stock but it just got stuck on the Verizon splash screen
I'm thinking it's because I had the NC2 kernel active when I should have gone back to the NC4 kernel
I looked for a NC4 kernel to flash but I only saw the modems and tar files, so not knowing if those were the same as kernels I decided to just try Jasmine. So far, I like it.
I have crazy battery drain though. I think it's because I'm running it in Slot 1
just picked up a verizon note 3 android 4.4.2 NC4
one of the very first posts above says you cant do anything on NC4 and then another post says NC4 is ok but just not android 4.4.4
NC4 is the latest update as of this writing isnt it?
what can actually be done with this vzw note 3 on android 4.4.2 NC4?
non dev edition of course
what about knox?
if rooting can be done with this phone on this OS is there any safe way not to trip knox?
en11gma said:
just picked up a verizon note 3 android 4.4.2 NC4
one of the very first posts above says you cant do anything on NC4 and then another post says NC4 is ok but just not android 4.4.4
NC4 is the latest update as of this writing isnt it?
what can actually be done with this vzw note 3 on android 4.4.2 NC4?
non dev edition of course
what about knox?
if rooting can be done with this phone on this OS is there any safe way not to trip knox?
Click to expand...
Click to collapse
I'd be happy to answer your questions
If you have an NC4 device that's running 4.4.2, you are able to gain root access and install safestrap recovery on your device. However, if the android version is 4.4.4, you cannot root or install safestrap.
NC4 is just our last build number, but there are two versions I think, the 4.4.2 and the 4.4.4. In the 4.4.4, they blacklisted every single compatible kernel that could work on the device. They forgot to do it in the 4.4.2 version, that's why we're able to gain root.
On our NC4 4.4.2 Verizon Note 3, we can root, install safestrap recovery and install a very limited amount of roms from the non developer edition selection on the XDA forums.
Rooting via towelroot, to my knowledge, does not trip knox. However, installing safestrap recovery does. But if you're worried about your warranty being voided, I wouldn't panic too much because with our bootloader being locked, it is very easy to flash the original Stock Verizon files through Odin to go straight back to factory settings so it looks like if you just pulled it out the box. The knox code would be reset and you would have a device that looked like if it has never been rooted or modified.
rdar_93 said:
I'd be happy to answer your questions
If you have an NC4 device that's running 4.4.2, you are able to gain root access and install safestrap recovery on your device. However, if the android version is 4.4.4, you cannot root or install safestrap.
NC4 is just our last build number, but there are two versions I think, the 4.4.2 and the 4.4.4. In the 4.4.4, they blacklisted every single compatible kernel that could work on the device. They forgot to do it in the 4.4.2 version, that's why we're able to gain root.
On our NC4 4.4.2 Verizon Note 3, we can root, install safestrap recovery and install a very limited amount of roms from the non developer edition selection on the XDA forums.
Rooting via towelroot, to my knowledge, does not trip knox. However, installing safestrap recovery does. But if you're worried about your warranty being voided, I wouldn't panic too much because with our bootloader being locked, it is very easy to flash the original Stock Verizon files through Odin to go straight back to factory settings so it looks like if you just pulled it out the box. The knox code would be reset and you would have a device that looked like if it has never been rooted or modified.
Click to expand...
Click to collapse
Safestrap does not trip knox.
mjh68 said:
Safestrap does not trip knox.
Click to expand...
Click to collapse
Thanks. I must have tripped mine somehow cause my device says "custom" when booting.
I'm guessing it might be Xposed but I'm not too sure.
rdar_93 said:
Thanks. I must have tripped mine somehow cause my device says "custom" when booting.
I'm guessing it might be Xposed but I'm not too sure.
Click to expand...
Click to collapse
It will say custom, but that isn't tripping knox. Custom can be removed with the triangle away app. Custom just gets flagged like you were saying by changing the recovery , but it doesn't trip the knox counter.
mjh68 said:
It will say custom, but that isn't tripping knox. Custom can be removed with the triangle away app. Custom just gets flagged like you were saying by changing the recovery , but it doesn't trip the knox counter.
Click to expand...
Click to collapse
Then I must be confused about what knox really is.
What is "Knox" then?

Categories

Resources