hello my friends.
I have a devil problem.
i have the g2 with G Flex port rom. and after that i deside to flash the OptimusG3 port rom. Whene i see that it lost recovery , i tried to reistall it with autorec . apk.
Then a security error boot image apears .
so i start the downgrade with the offline fix. everythig works. except that whene i boot into device the Gapps FC all of them and i cant do nothing.
i tried again both of 10A and 20D kzr. but same problemm... i dont have recovery so i cant reflash gapps. or any other rom. I cant either hard reset . or wipe anyrything ....
any suggestion ??
thanks. and sorry for my terrible english.
Jason.
verikioc said:
hello my friends.
I have a devil problem.
i have the g2 with G Flex port rom. and after that i deside to flash the OptimusG3 port rom. Whene i see that it lost recovery , i tried to reistall it with autorec . apk.
Then a security error boot image apears .
so i start the downgrade with the offline fix. everythig works. except that whene i boot into device the Gapps FC all of them and i cant do nothing.
i tried again both of 10A and 20D kzr. but same problemm... i dont have recovery so i cant reflash gapps. or any other rom. I cant either hard reset . or wipe anyrything ....
any suggestion ??
thanks. and sorry for my terrible english.
Jason.
Click to expand...
Click to collapse
Ηι, you can try to use the official lg support tool to restore your phone...just click Error recovery upgrade in additional features!!!
pk940 said:
Ηι, you can try to use the official lg support tool to restore your phone...just click Error recovery upgrade in additional features!!!
Click to expand...
Click to collapse
thanks for your answer. but i have already done this. sorry for not mension it.
verikioc said:
thanks for your answer. but i have already done this. sorry for not mension it.
Click to expand...
Click to collapse
you can try also lg flashtool with .tot files
pk940 said:
you can try also lg flashtool with .tot files
Click to expand...
Click to collapse
damn that WORKED!!!! thanks dude.
verikioc said:
damn that WORKED!!!! thanks dude.
Click to expand...
Click to collapse
.
Related
Hello! sorry for bad english,
i have TWRP on my LG G2 D802 and i am trying to install CM 11 but it fails all the time! Some people say that its all about TWRP and i have to flash CWM... so, how can i do it? i tried to flash via Rom Manager over it but nothing! plz anyone?
https://www.dropbox.com/s/4clnin9y9xdgt7m/IMG_20131212_222152.jpg
A Pain
disme547 said:
Hello! sorry for bad english,
i have TWRP on my LG G2 D802 and i am trying to install CM 11 but it fails all the time! Some people say that its all about TWRP and i have to flash CWM... so, how can i do it? i tried to flash via Rom Manager over it but nothing! plz anyone?
Click to expand...
Click to collapse
I have been trying to do the same, over and over again, I think the only way is to go back to stock, but since the Root method I used required TWRP, that won't help either and that I had to install via ADB, I would love to find an answer to this too
Here is your answer!
disme547 said:
Hello! sorry for bad english,
i have TWRP on my LG G2 D802 and i am trying to install CM 11 but it fails all the time! Some people say that its all about TWRP and i have to flash CWM... so, how can i do it? i tried to flash via Rom Manager over it but nothing! plz anyone?
Click to expand...
Click to collapse
Which version of TWRP are yours?
You can download the newest one (2.6.3.4) here
I downloaded the flashable one and then installed CM 11 just fine.
My phone is D802 too.
Hope I can help! :fingers-crossed:
i flashed it with flashify using this copy of CWM
hmm didnt see that you were using the d802...not sure if this will work or not. If you want to try it be my guest. otherwise get on the AndIRC channel and ask around thats what I did.
Also you can replace the recovery from terminal.
Here is the link. Just did it and tested successfully.
http://forum.xda-developers.com/showthread.php?t=2468858
albsat said:
Also you can replace the recovery from terminal.
Here is the link. Just did it and tested successfully.
http://forum.xda-developers.com/showthread.php?t=2468858
Click to expand...
Click to collapse
nothing is working..... :crying::crying:
Now that i flashed latest CWM i realized that even now i cant flash CM 11......
https://www.dropbox.com/s/4clnin9y9xdgt7m/IMG_20131212_222152.jpg[/QUOTE]
try to install philz touch from twrp https://www.dropbox.com/s/tskgz4ei8262s61/philz_touch_6.07.6-d802.zip
My Phone model is LG L7 P700 but then flashing it says taht its P705. How to change it Back?
EX. This package is for "p700" devices; this is "p705". I try to install "cpa_p700-CrystalPA-5.00-20140709.zip"
Hi !
Try to flash recovery for P700
Recovery
F4uzan said:
Hi !
Try to flash recovery for P700
Click to expand...
Click to collapse
You Mean rrecovery with KDZ? Tell me more about it? Meybe can share link wath to do? Thanks.
Paulenzas said:
You Mean rrecovery with KDZ? Tell me more about it? Meybe can share link wath to do? Thanks.
Click to expand...
Click to collapse
No, I mean recovery flashed with recovery (may sounds weird, but it really is).
Example is TWRP P700 recovery by tudorsirb, link here :
CLICK !
Or you can try PhilZ CWM recovery by ali.filth, link here :
Thread Link
Download Link
To install these recovery, just flash directly in recovery. After that, reboot the recovery (either by selecting 'reboot recovery' menu or turning off your device then entering back recovery).
f4uzan said:
no, i mean recovery flashed with recovery (may sounds weird, but it really is).
Example is twrp p700 recovery by tudorsirb, link here :
click !
or you can try philz cwm recovery by ali.filth, link here :
thread link
download link
to install these recovery, just flash directly in recovery. After that, reboot the recovery (either by selecting 'reboot recovery' menu or turning off your device then entering back recovery).
Click to expand...
Click to collapse
thank you!!! You saved my life :d
Paulenzas said:
thank you!!! You saved my life :d
Click to expand...
Click to collapse
Happy to help ^_^
Come back if you got into some problem again
#F4UZAN : Team Optima
is this one flash able and stable, i have tried to use autorec to install recovery twrp, but i got security error and boot. also, i can even find the rom to restore it back ? any ideas ?
Rootable ? yes, you can use Kingroot it worked for me http://kingroot.fr.uptodown.com/android if this did not work try the PC version it will for sure.
is it stable ?, i cannot help on this.
kamel-kgb said:
Rootable ? yes, you can use Kingroot it worked for me http://kingroot.fr.uptodown.com/android if this did not work try the PC version it will for sure.
is it stable ?, i cannot help on this.
Click to expand...
Click to collapse
i used king root, but i tried install twrp and i get a security error now, where do i find stock rom for ls980zvi ?
droid3923 said:
is this one flash able and stable, i have tried to use autorec to install recovery twrp, but i got security error and boot. also, i can even find the rom to restore it back ? any ideas ?
Click to expand...
Click to collapse
You can try this guide regarding fail to install autorec by me : http://forum.xda-developers.com/verizon-g2/general/how-to-install-twrp-lg-g2-noob-friendly-t3396596
Its working on verizon variant but you it should work for sprint as well.
LMK how it went.
iubjaved said:
You can try this guide regarding fail to install autorec by me : http://forum.xda-developers.com/verizon-g2/general/how-to-install-twrp-lg-g2-noob-friendly-t3396596
Its working on verizon variant but you it should work for sprint as well.
LMK how it went.
Click to expand...
Click to collapse
i am stuck at boot screen, i get security error in a loop. but i can boot to twrp
droid3923 said:
i am stuck at boot screen, i get security error in a loop. but i can boot to twrp
Click to expand...
Click to collapse
Did you have a nandroid backup? If so, you can boot to twrp and restore. Or just go back to stock firmware.
iubjaved said:
Did you have a nandroid backup? If so, you can boot to twrp and restore. Or just go back to stock firmware.
Click to expand...
Click to collapse
thanks for helping, i just reinstalled the stock.
hello,
so i was installing cm13 while installing i wiped entire partition(data,including system)
now i can only boot into recovery , i installed cm13, cm-12.1-YOG4PAS9IG-ham-signed-d4fc2c5394 , after installing if i reboot it will again go to reovery only wont boot into phone..
please help
thank you
ancilary said:
i installed cm13, cm-12.1-YOG4PAS9IG-ham-signed-d4fc2c5394 , after installing ..
Click to expand...
Click to collapse
That's doesn't make sense, can you explain what it means? Which recovery, which rom was installed and was working? You wipes system and data, ok. What did you do then?
strongst said:
That's doesn't make sense, can you explain what it means? Which recovery, which rom was installed and was working? You wipes system and data, ok. What did you do then?
Click to expand...
Click to collapse
hi , thanks for reply
i was using nought rom 7.0 & TEAMWIN recovery
i performed wipe ( data , cache , system , internal storage)
then installed cm13
it booted only to recovery , after that i tried flashing different rom , no use everytime it goes only to recovery..
What's with your other request? http://forum.xda-developers.com/zuk-z1/help/how-to-make-device-stock-t3515921
You need cm13 or stock rom? It's annoying to open several threads..
strongst said:
What's with your other request? http://forum.xda-developers.com/zuk-z1/help/how-to-make-device-stock-t3515921
You need cm13 or stock rom? It's annoying to open several threads..
Click to expand...
Click to collapse
that was different but i tried this and now im stuck here
ancilary said:
that was different but i tried this and now im stuck here
Click to expand...
Click to collapse
And what you need is a running cm13 now?
strongst said:
And what you need is a running cm13 now?
Click to expand...
Click to collapse
ya running cm or any other rom is fine..
ancilary said:
ya running cm or any other rom is fine..
Click to expand...
Click to collapse
seems you don't know what you need cm isn't the same as cos, the difference is huge.
For cos12.1 stock rom you can get it here http://forum.xda-developers.com/zuk-z1/help/how-to-make-device-stock-t3515921/post70007487
Flash it with all in one tool, it's the easiest way.
Cm13 you can flash it though twrp.
strongst said:
seems you don't know what you need cm isn't the same as cos, the difference is huge.
For cos12.1 stock rom you can get it here http://forum.xda-developers.com/zuk-z1/help/how-to-make-device-stock-t3515921/post70007487
Flash it with all in one tool, it's the easiest way.
Cm13 you can flash it though twrp.
Click to expand...
Click to collapse
i flashed cm-12.1-YOG4PAS3AJ-ham-signed.zip with twrp still i get booted to recovery only
ancilary said:
i flashed cm-12.1-YOG4PAS3AJ-ham-signed.zip with twrp still i get booted to recovery only
Click to expand...
Click to collapse
You didn't understand or read my post... You need to flash stock firmware with fastboot. I didn't wrote flash it with twrp.
Use the all in one tool. It's called so, because you can do all with it. Like downloading stock rom and flash it :good:
strongst said:
You didn't understand or read my post... You need to flash stock firmware with fastboot. I didn't wrote flash it with twrp.
Use the all in one tool. It's called so, because you can do all with it. Like downloading stock rom and flash it :good:
Click to expand...
Click to collapse
i tried flashing stock recovery using All in one tool but now its not booting to recovery only
ancilary said:
i tried flashing stock recovery using All in one tool but now its not booting to recovery only
Click to expand...
Click to collapse
Sorry mate, why you do that? It said to flash stock rom with all in one tool, not stock recovery
strongst said:
Sorry mate, why you do that? It said to flash stock rom with all in one tool, not stock recovery
Click to expand...
Click to collapse
i read it as recovery my bad...
now i cannot boot into recovery/fastboot.
powers on rarely too just shows zuk logo and goes off
ancilary said:
i read it as recovery my bad...
now i cannot boot into recovery/fastboot.
powers on rarely too just shows zuk logo and goes off
Click to expand...
Click to collapse
Use all in one tool to boot into bootloader. Read carefully or your next step is qfil method
Here's a good guide in case you're don't get it through aoi tool: http://forum.xda-developers.com/zuk-z1/general/qpst-method-how-to-unbrick-to-stock-t3506833
But better to check again if you can flash stock cos rom with tool
strongst said:
Use all in one tool to boot into bootloader. Read carefully or your next step is qfil method
Here's a good guide in case you're don't get it through aoi tool: http://forum.xda-developers.com/zuk-z1/general/qpst-method-how-to-unbrick-to-stock-t3506833
But better to check again if you can flash stock cos rom with tool
Click to expand...
Click to collapse
Nothing is happening in phone , no respone for any button press . its wont turn on also now
ancilary said:
Nothing is happening in phone , no respone for any button press . its wont turn on also now
Click to expand...
Click to collapse
Can you charge it?
Hello,
Recently i installed flumics rom on my phone and everything was fine but today i wanted to go back to stock rom and it seems i can't.
I installed the latest lg usb drivers and downloaded the latest lgup with uppercut
When i try to install the kdz file from the lgup everything is working fine and it finished 100% then the phone reboots and stucks at lg logo then after a while it reboots again and same thing stucks again.
ALso when i try to flash the kdz file again in the lgup it shows Fulmics rom 1.6
Tried to do a factory reset from lg recovery as well didn't help
Don't know how to turn off the device fully so i have some battery left.
Anyone can help me with this? do i need to send it back to lg?
If you have TWRP still just flash stock rom and bootloader
basicreece said:
If you have TWRP still just flash stock rom and bootloader
Click to expand...
Click to collapse
Sadly the kdz files i flashed restored the stock recovery.
Also i tried the lg bridge as well but that didn't work either.
I have left the phone doing its thing for more than 45 mins, i guess that is not normal.
Use LGUP and Uppercut to flash stock. Need drivers and put phone in download mode. It will find the port and then flash the firmware.
basicreece said:
Use LGUP and Uppercut to flash stock. Need drivers and put phone in download mode. It will find the port and then flash the firmware.
Click to expand...
Click to collapse
But that's what i already did like i mentioned above.
Make sure downloads are good, do you get an errors etc?
basicreece said:
Make sure downloads are good, do you get an errors etc?
Click to expand...
Click to collapse
I downloaded 3 different kdz files for h870 and none of them worked.
The strange thing is why after i flash the kdzs the lgup shows Fulmics Rom v1.6 under the version category.
Is there any way to flash recovery via download mode?
Enter bootloader and try to flash twrp again. Then flash the stock rom and all will be fine.
mprovi_15 said:
Enter bootloader and try to flash twrp again. Then flash the stock rom and all will be fine.
Click to expand...
Click to collapse
That's what i am asking xD
How do to that?
John X. said:
That's what i am asking xD
How do to that?
Click to expand...
Click to collapse
The same way you did it the first time?....
basicreece said:
The same way you did it the first time?....
Click to expand...
Click to collapse
The first time was from a working phone, anyway managed to installed it and all working great now!
How did you do it? Im in the same boat but I havent made any backup files
I've hit upon the same problem too, would love to know the workaround