So I recently had my phone die (SGS4 32GB Black mist with old BL) and had to get a replacement from AT&T. Of course the new one came with it completely updated as far as it can be to 4.4.2. I read through the info on how to do safestrap since I hadn't had to deal with it before on my other phone. Was able to downgrade it to MK2, root it, and install safestrap. Then ended up updating back up to NB1 then to NC1. Well being the flash junky I was, wasn't content with that so I tried Safestrap Golden Eye. Had issues, wiped the phone and tried to start things over. Now, no matter what I do I cant get back down to MK2 because it will never boot past the ATT sphere and the boot up sound. It just stays at that screen. SO I go back to NB1 and it boots. I can't get safestrap to install on NB1 or NC1 no matter what I do. I also cant write to my external MicroSD card. This phone is going to slam against some concrete very soon, I'm really getting annoyed. Anyone have some info on what I should try??. Here is a screen shot of what's on my phone right now.
Re: Can't get Safestrap
Check out http://forum.xda-developers.com/showthread.php?t=2783335 (especially page 3)
This is the thread I followed to at least get rooted but it also has instructions on how to set up safestrap. The downgrade method is no longer necessary with towelroot. Just head over to http://towelroot.com/ and click the lambda to download towelroot and make it ra1n.
To get safestrap, download https://mega.co.nz/#!61hyXCgS!hxerBG...mscEBlsP0VlaWM (Thanks to @Maribou)
Install supersu (included in that zip), install SELinux, set it to permissive, and then install safestrap. All of these are included in that zip along with the kernel modules. Now if you reboot, you should have SafeStrap.
Hope that works for you.
I already have all that. I'm also already rooted. When I go to install safestrap it says installed but says Safe System not active.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
highaltitude said:
I already have all that. I'm also already rooted. When I go to install safestrap it says installed but says Safe System not active.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Sure SELinux is permissive? It says Enforcing in that screenshot, don't know if that was before you did it or if you missed that. The issue of it not going past the boot animation when you downgrade makes it sound like it didn't flash the MK2 kernel, but I'm not sure how or why that would occur.
DeadlySin9 said:
Sure SELinux is permissive? It says Enforcing in that screenshot, don't know if that was before you did it or if you missed that. The issue of it not going past the boot animation when you downgrade makes it sound like it didn't flash the MK2 kernel, but I'm not sure how or why that would occur.
Click to expand...
Click to collapse
According to SELinux it says "permissive" Not sure if it was on at the time of the screenshot, but I have tried it quite a few times. The phone is rooted, but the safestrap never says active.
Where do I get the Mk2 kernel by itself?
highaltitude said:
According to SELinux it says "permissive" Not sure if it was on at the time of the screenshot, but I have tried it quite a few times. The phone is rooted, but the safestrap never says active.
Where do I get the Mk2 kernel by itself?
Click to expand...
Click to collapse
It's one of the files included in the MK2 downgrade package, but I think in the MK2 ODIN thread you can also get just the kernel.
Got it all working finally, thanks for the help guys.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Related
Rooting my Galaxy S4 has been one of the biggest pains in my rear ever and now I'm bricked and need a bit of help.
Normally, when I want to root a phone, I come here, to XDA, and follow a nice well written up-to-date thread on how to do it and it works. For the S4 however, I can't find any such threads that are not either old, out-of-date, or they use so many abbreviations for things I have no clue what they are talking about.
I started out with a totally stock Samsung Galaxy S4, was a VPUAMDL.
I used ODIN to push TWRP tarball. I then used TWRP to install the CWM SuperSU zip file.
I noticed when it started up that I had no root, I had the SuperSU program however, it nor another program I got on the marketplace, could confirm root.
Bit of looking I found this: galaxys4root (DOT) com/galaxy-s4-root/sprint-vpuamdl-firmware-update-root-fix/
(sorry, can't post full links yet)
Which basically informed me that VPUAMDL needs a new kernel to remove the SetUID restrictions.
I downloaded that file, and put it on my SD card. Booted into TWRP and installed. now my phone is bricked. gets to the "Samsung Galaxy S4" startup splash screen on black background
I am looking for a kernel that will work, either the stock kernel or not.
I am also looking for a good tut on rooting the S4, as all the tuts I have used have been utter wasted time.
I have ODIN, and can boot TWRP, ODIN mode, etc on my phone.
have no clue where to go from here and Im afraid to start trying to download random files and get everything mixed and confused.
Thanks for any help at all.
CF Auto Root
http://forum.xda-developers.com/showthread.php?t=2291827
Sent from my SPH-L720 using xda app-developers app
FanOfSkynyrd said:
CF Auto Root
http://forum.xda-developers.com/showthread.php?t=2291827
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
I followed that page, pushed it, installed fine, 100% no errors.
still bricked at GS4 startup splashscreen.
It did finish successfully and I saw the screen with the red android.
It removed TWRP and replaced it with the stock recovery as it should have.
I am actually surprised myself that it is still bricked at the GS4 splash.
Odin stock everything. See if it boots. Then try to root after that.
Stealyourface said:
Odin stock everything. See if it boots. Then try to root after that.
Click to expand...
Click to collapse
I am failing to find stock everything to push.
I think I stated that, not sure... hmm
none the less. I do not have a stock kernel or recovery on hand. I can not find one either as there seem to be a plethora of kernels and threads and pages all for different files and downloads. Sifting through trying to find something is becoming harsh. Thus this thread.
You are not bricked if your phone can turn on and go to download mode or recovery.
Sent from my Sprint Galaxy S4 using Tapatalk 2
GiantJay said:
You are not bricked if your phone can turn on and go to download mode or recovery.
Sent from my Sprint Galaxy S4 using Tapatalk 2
Click to expand...
Click to collapse
Well then its whatever you want to call it when it wont boot the operating system and is totally un-usable as a phone or mobile device.
I would go HERE
That is the thread for stock MDL stuff.
Download and flash the kernel and full wipe rom for MDL.
Then upgrade to MF9.
+2 ^^^^ to what he said :edit:
Nice tut on rooting the s4 thanks to mudavo here http://forum.xda-developers.com/sho...to Full Stock [MF9] w/ Root & Custom Recovery
There is also a video tutorial stickied in android devolpment
Sent from myself SPH-L720 using xda app-developers
Thanks guys, going to try some of the stuff from there. Hope i get it going. Need mah phone back! lol
Wooo, those links where just what I needed. Thanks a lot.
Got my phone back on and now I have a stock file in case I muck things up again.
Just make a nand back up and restore when something bad happens ive mucked up alot and it has always saved me
Sent from my SPH-L720 using xda app-developers app while smoking
Hello developers.
I'm trying to reroot my phone after the latest 4.3 update via ODIN for my Indian handset.
I'm trying using CF-AutoRoot via ODIN and the it says PASS and the phone restarts normally as it should but the root is simply not happening.
there were 2 android 4.3 updates for my device and i installed the latest (you can see the post title for the exact version)
after everything completed properly i simply tried CF-AutoRoot via ODIN and nothing is happening.
Till 4.2.2, it got rooted properly without such or any other problems.
Kindly assist me out in getting my phone rooted.
Regards.
Here too
avineshwar said:
Hello developers.
I'm trying to reroot my phone after the latest 4.3 update via ODIN for my Indian handset.
I'm trying using CF-AutoRoot via ODIN and the it says PASS and the phone restarts normally as it should but the root is simply not happening.
there were 2 android 4.3 updates for my device and i installed the latest (you can see the post title for the exact version)
after everything completed properly i simply tried CF-AutoRoot via ODIN and nothing is happening.
Till 4.2.2, it got rooted properly without such or any other problems.
Kindly assist me out in getting my phone rooted.
Regards.
Click to expand...
Click to collapse
Yep, I can´t re-root it again it seems the CF-Auto-Root-ja3g-ja3gxx-gti9500.tar its not working for the i9500XXUEMJ8 versión, well time to wait to an updated CF-Auto Root :crying::crying::crying:
I9500XXUEMJ5 root working (almost working)... i cant run some app, without root all apps working great ;/
Weird. I rooted using CF Auto Root after flashing 4.3 MJ8, it always worked! I never did OTA update though, always used Odin and full wipe.
avineshwar said:
Hello developers.
I'm trying to reroot my phone after the latest 4.3 update via ODIN for my Indian handset.
I'm trying using CF-AutoRoot via ODIN and the it says PASS and the phone restarts normally as it should but the root is simply not happening.
there were 2 android 4.3 updates for my device and i installed the latest (you can see the post title for the exact version)
after everything completed properly i simply tried CF-AutoRoot via ODIN and nothing is happening.
Till 4.2.2, it got rooted properly without such or any other problems.
Kindly assist me out in getting my phone rooted.
Regards.
Click to expand...
Click to collapse
The rooting worked so far for me. Have you enabled KNOX? They enhanced the security features and as far as I heard KNOX-enabled devices can't get full root. Verify whether it is enabled or not. I'm not sure whether the user enables it or not but that may be the reason. I'm also not sure whether this KNOX security really affects I9500 models. I9505 models are definitely affected.
jujuburi said:
Weird. I rooted using CF Auto Root after flashing 4.3 MJ8, it always worked! I never did OTA update though, always used Odin and full wipe.
Click to expand...
Click to collapse
Probably I never full wiped.
The apps and all other data is retained (normally all is retained when we update rom via odin).
Factory reset (full wipe) was never required earlier to get root to work.
Knox is not on from my side though I get some notifications always that some app tried to access something and Knox blocked that. But I guess that is something else because we need to manually activate Knox after opening the Knox app.
Sent from my GT-I9500 using xda app-developers app
kci83 said:
I9500XXUEMJ5 root working (almost working)... i cant run some app, without root all apps working great ;/
Click to expand...
Click to collapse
It did worked for me too but only at times.
When I updated rom switcher app, root was gone and it never happened again!
Sent from my GT-I9500 using xda app-developers app
anyone with any solution for this?
anyone with any solution for this?
Solved!
Sent from my GT-I9500 using xda app-developers app
what was the solution? did you need to do a fullwipe? or used another method for rooting?
im on 4.2.2 MG9 and would like to update to 4.3 and have root without the know issue.
thanks.
Backup and Factory reset and cache clear after updating to 4.3
Then you'll get stock Samsung 4.3
Follow the same method to root (auto root) or alternatively flash super su via cwm/twrp/stock recovery.
resitm said:
what was the solution? did you need to do a fullwipe? or used another method for rooting?
im on 4.2.2 MG9 and would like to update to 4.3 and have root without the know issue.
thanks.
Click to expand...
Click to collapse
avineshwar said:
Backup and Factory reset and cache clear after updating to 4.3
Then you'll get stock Samsung 4.3
Follow the same method to root (auto root) or alternatively flash super su via cwm/twrp/stock recovery.
Click to expand...
Click to collapse
Thank you. Will this trip the knox thing?
After using CF-AUto root you need to update Super SU App on first boot.
Then Open SuperSU app and choose to install SU Binary without using a custom recovery.
Then reboot.
Then install Titanium backup pro and use it to free all Knox related files.
There are 7 of them and you need to remove all of them.
Remember you need to install a custom recovery to install busybox. (atleast in my case)
Install http://forum.xda-developers.com/showthread.php?t=2489234 via ODIN.
Once you are on custom recovery.
Use busybox installer to install busybox.
reboot.
You are done.
resitm said:
Thank you. Will this trip the knox thing?
Click to expand...
Click to collapse
No mate.
Wait for a future update to trip that.
In the mean time, I'm trying to trip that since it isn't very difficult just lazy to try everything since everytime 1 thing fails, I need to restore the whole data and if takes much of my bandwidth.
Hope you understand.
And the device status will also remain custom.
P.S. Touchwiz UI from Samsung will hang on a later date due to some app compatibility issue (I'm not sure which app but I can tell a large set of apps and it will hang due to any one from that list) so it is preferred to shift to some other launcher on pre hand.
Sent from my GT-I9500 using xda app-developers app
thank you both avineshwar and ajhavery.
i really wanted to update but i guess i am going to wait for a while. lots of issues seem to be happening once rooted. also dont want to lose warranty with the knox thing.
it seems the custom roms such as arrow and crash also have sound issues, FC issues on some apps.
i guess ill wait and see. maybe once the nexus 5 is out i can sell the i9500 and get the nexus 5.
resitm said:
thank you both avineshwar and ajhavery.
i really wanted to update but i guess i am going to wait for a while. lots of issues seem to be happening once rooted. also dont want to lose warranty with the knox thing.
it seems the custom roms such as arrow and crash also have sound issues, FC issues on some apps.
i guess ill wait and see. maybe once the nexus 5 is out i can sell the i9500 and get the nexus 5.
Click to expand...
Click to collapse
Waiting is good.
Don't sell your phone though (for obvious reasons).
You've got much to explore.
When it comes to selling, you'll get money whenever you do that so keep that option as your last bet.
Custom roms aren't really preferred from my side until you are a die hard modification fan!.
Rooting is the only problem (which is solved now I guess) on the latest firmware.
Rooting won't do any problem, believe me (except warranty).
Sent from my GT-I9500 using xda app-developers app
avineshwar said:
Waiting is good.
Don't sell your phone though (for obvious reasons).
You've got much to explore.
When it comes to selling, you'll get money whenever you do that so keep that option as your last bet.
Custom roms aren't really preferred from my side until you are a die hard modification fan!.
Rooting is the only problem (which is solved now I guess) on the latest firmware.
Rooting won't do any problem, believe me (except warranty).
Sent from my GT-I9500 using xda app-developers app
Click to expand...
Click to collapse
hello again, i am asking this question because i cant post in the development forum yet.
i downloaded 3 files from the OP http://forum.xda-developers.com/showthread.php?t=2317105
the PDA, CSC and modem. all for MJ8, downloaded PDA is odex.
when i flashed 3 of the files with ODIN like shown in op my device. After i restarted i got errors for Unfortunately, the process com.google.process.gapps .
i searched on google and did what was suggested, like clearing dalvik cache, resetting default apps, uninstalling the play store update etc.
the phone was unusable, the errors popedup every second.
I had to go back to the MG9 4.2.2 firmware.
What did i do wrong?
have you guys tried the method mentioned in the post. it prerooted and knox free 4.3 firmware.
resitm said:
hello again, i am asking this question because i cant post in the development forum yet.
i downloaded 3 files from the OP http://forum.xda-developers.com/showthread.php?t=2317105
the PDA, CSC and modem. all for MJ8, downloaded PDA is odex.
when i flashed 3 of the files with ODIN like shown in op my device. After i restarted i got errors for Unfortunately, the process com.google.process.gapps .
i searched on google and did what was suggested, like clearing dalvik cache, resetting default apps, uninstalling the play store update etc.
the phone was unusable, the errors popedup every second.
I had to go back to the MG9 4.2.2 firmware.
What did i do wrong?
have you guys tried the method mentioned in the post. it prerooted and knox free 4.3 firmware.
Click to expand...
Click to collapse
Probably you want to upgrade to 4.3?
If so goto sammobile.com and find the latest firmware for your device from there, download and flash the same via odin.
You're now on 4.3!
Once done you can root from the auto root method by chain fire.
Sent from my GT-I9500 using xda app-developers app
avineshwar said:
Probably you want to upgrade to 4.3?
If so goto sammobile.com and find the latest firmware for your device from there, download and flash the same via odin.
You're now on 4.3!
Once done you can root from the auto root method by chain fire.
Sent from my GT-I9500 using xda app-developers app
Click to expand...
Click to collapse
that would be the easiest and best solution but i am worried about the knox issue, losing the warranty and also having to sell the phone later on for a lower price.
I was on MJE rooted and safestrapped. No problems. I put SuperSu in survival mode, took the OTA...knowing full well the bootloader issue (I had played with NC2 with NC4 modem for a while and had tons of issues)...I am still rooted on NC4 no problems doing anything rootlike...except Safestrap 3.72 will not set the boot up to give me the choice to recover or continue no matter what. So I even tried Safestrap 3.73...when I install the recovery...3.73 says it completed and shows "installed" But still no choice at boot time.
Has anyone gotten this to work?
Sent from my Note 3 via Tapatalk
This is like playing with fire lol
Root is to precious to me to mess around like this. Good luck tho!
Inkedadrenaline said:
This is like playing with fire lol
Root is to precious to me to mess around like this. Good luck tho!
Click to expand...
Click to collapse
Yea...I am for sure still rooted, just not safestrapped, I am still playing with it and was just wondering if anyone had already done so.
Sent from my Note 3 via Tapatalk
donc113 said:
Yea...I am for sure still rooted, just not safestrapped, I am still playing with it and was just wondering if anyone had already done so.
Sent from my Note 3 via Tapatalk
Click to expand...
Click to collapse
That's pretty cool. I respect you for taking the plunge. Def have more testicular fortitude than me
donc113 said:
I was on MJE rooted and safestrapped. No problems. I put SuperSu in survival mode, took the OTA...knowing full well the bootloader issue (I had played with NC2 with NC4 modem for a while and had tons of issues)...I am still rooted on NC4 no problems doing anything rootlike...except Safestrap 3.72 will not set the boot up to give me the choice to recover or continue no matter what. So I even tried Safestrap 3.73...when I install the recovery...3.73 says it completed and shows "installed" But still no choice at boot time.
Has anyone gotten this to work?
Sent from my Note 3 via Tapatalk
Click to expand...
Click to collapse
How did you get SS 3.73? It's not even listed in Hash's thread...
LeftyGR said:
How did you get SS 3.73? It's not even listed in Hash's thread...
Click to expand...
Click to collapse
Google search...it was actually for a different phone....but what the heck...tried it anyway.
Sent from my Note 3 via Tapatalk
Please see the mini guide I just posted at http://forum.xda-developers.com/showthread.php?t=2762999 for information on how to go from a STOCK MJE non rooted phone to one with KitKat 4.4.2 rooted (odex or deodex). As well as move to a custom non stock rom.
donc113 said:
I was on MJE rooted and safestrapped. No problems. I put SuperSu in survival mode, took the OTA...knowing full well the bootloader issue (I had played with NC2 with NC4 modem for a while and had tons of issues)...I am still rooted on NC4 no problems doing anything rootlike...except Safestrap 3.72 will not set the boot up to give me the choice to recover or continue no matter what. So I even tried Safestrap 3.73...when I install the recovery...3.73 says it completed and shows "installed" But still no choice at boot time.
Has anyone gotten this to work?
Sent from my Note 3 via Tapatalk
Click to expand...
Click to collapse
U need to have busybox installed for kitkat safestrap
donc113 said:
Google search...it was actually for a different phone....but what the heck...tried it anyway.
Sent from my Note 3 via Tapatalk
Click to expand...
Click to collapse
Why on earth would you try one that was deved for a different phone?
SirBindy said:
Why on earth would you try one that was deved for a different phone?
Click to expand...
Click to collapse
Because I was thinking I would try a reflash with Odin if needed. I've been "trying stuff" with UNIX based servers since the early 80's. I have no problem reflashing a phone.
Sent from my Note 3 via Tapatalk
RomsWell said:
U need to have busybox installed for kitkat safestrap
Click to expand...
Click to collapse
BusyBox is installed, and active, and SafeStrap checks for it and Safestrap says it's installed...but even hitting the Reboot to Recovery button does a "normal" reboot and I don't get the recover/continue option.
Sent from my Note 3 via Tapatalk
donc113 said:
Yea...I am for sure still rooted, just not safestrapped, I am still playing with it and was just wondering if anyone had already done so.
Sent from my Note 3 via Tapatalk
Click to expand...
Click to collapse
After reading your post I went ahead and tried to take the NC4 OWA with supersu in survival mode. It Worked! I was on stock mje, rooted with kingo and had a modded framework for tethering. I restored the backup of my stock framework file, then unfroze all of my apps. I put supersu in survival mode, disabled superuser, and turned default access to deny. I then enabled the install of the OWA and after the reboot I enabled supersu and just like that I still had root. So far no issues.
As far as safestrap goes, I didn't have safestrap before but I may try to install it to see if it works now. I'll let you know.
donc113 said:
BusyBox is installed, and active, and SafeStrap checks for it and Safestrap says it's installed...but even hitting the Reboot to Recovery button does a "normal" reboot and I don't get the recover/continue option.
Sent from my Note 3 via Tapatalk
Click to expand...
Click to collapse
Third time is a charm I guess. I uninstalled the recovery, rebooted, reinstalled the recovery, hit the reboot to recovery and got to Safestrap just fine. And it now gives me the choice during reboot.
Sent from my Note 3 via Tapatalk
RicksROMbuild8/NC4
Im on "RicksROMbuild8" with NC4,root and safestrap still.
Hey guys, so I tried to root and install a custom ROM, but I failed and now my phone is really messed up.
AFAIK I have I337UCUFNC1 and JSS15J.I337UCUEMK2. Not my original, I found these on this guide and have those installed. http://forum.xda-developers.com/showthread.php?t=2663545
I didn't backup my original ROM as the guide I was following didn't notify me of that and kinda screwed myself over.
I basically tried to root my phone using saferoot then followed with safestrap 3.71, seemed to go well. I then went into safestrap recovery and tried to install Mapleleaf 72314, got stuck on samsung boot screen. So I tried Goldeneye XXUGNG4-37, and got the same results. I read about the ATT modules and tried again with the NC1 as that should be the one I needed. Still no avail, I tried the MK2 deadly venom tool, said it failed and then required a reinstall as it just hung on the system download menu even if I restarted.
As of now I just reinstalled the default ROM I got from a guide and can't turn on Wifi, can't download from the app store using mobile data, and who knows what else problems.
All I want is to either go back to stock working android, or have someone put it in laymans terms on how to install a custom ROM as I seem to have no luck with it. I'm still currently rooted if that helps
Thank you
Koreankoga said:
Hey guys, so I tried to root and install a custom ROM, but I failed and now my phone is really messed up.
AFAIK I have I337UCUFNC1 and JSS15J.I337UCUEMK2. Not my original, I found these on this guide and have those installed. http://forum.xda-developers.com/showthread.php?t=2663545
I didn't backup my original ROM as the guide I was following didn't notify me of that and kinda screwed myself over.
I basically tried to root my phone using saferoot then followed with safestrap 3.71, seemed to go well. I then went into safestrap recovery and tried to install Mapleleaf 72314, got stuck on samsung boot screen. So I tried Goldeneye XXUGNG4-37, and got the same results. I read about the ATT modules and tried again with the NC1 as that should be the one I needed. Still no avail, I tried the MK2 deadly venom tool, said it failed and then required a reinstall as it just hung on the system download menu even if I restarted.
As of now I just reinstalled the default ROM I got from a guide and can't turn on Wifi, can't download from the app store using mobile data, and who knows what else problems.
All I want is to either go back to stock working android, or have someone put it in laymans terms on how to install a custom ROM as I seem to have no luck with it. I'm still currently rooted if that helps
Thank you
Click to expand...
Click to collapse
You can look up this link....http://www.androidrootz.com/2014/03/how-to-unrootunbrick-at-galaxy-s4-sgh.html
there might be some on XDA as well...I did not look
Koreankoga said:
Hey guys, so I tried to root and install a custom ROM, but I failed and now my phone is really messed up.
AFAIK I have I337UCUFNC1 and JSS15J.I337UCUEMK2. Not my original, I found these on this guide and have those installed. http://forum.xda-developers.com/showthread.php?t=2663545
I didn't backup my original ROM as the guide I was following didn't notify me of that and kinda screwed myself over.
I basically tried to root my phone using saferoot then followed with safestrap 3.71, seemed to go well. I then went into safestrap recovery and tried to install Mapleleaf 72314, got stuck on samsung boot screen. So I tried Goldeneye XXUGNG4-37, and got the same results. I read about the ATT modules and tried again with the NC1 as that should be the one I needed. Still no avail, I tried the MK2 deadly venom tool, said it failed and then required a reinstall as it just hung on the system download menu even if I restarted.
As of now I just reinstalled the default ROM I got from a guide and can't turn on Wifi, can't download from the app store using mobile data, and who knows what else problems.
All I want is to either go back to stock working android, or have someone put it in laymans terms on how to install a custom ROM as I seem to have no luck with it. I'm still currently rooted if that helps
Thank you
Click to expand...
Click to collapse
Return to stock using Odin and this from the general forum http://forum.xda-developers.com/showthread.php?p=50912149
You can flash the rootable version and then user towel root to root
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Return to stock using Odin and this from the general forum http://forum.xda-developers.com/showthread.php?p=50912149
You can flash the rootable version and then user towel root to root
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Thank, its was somewhat able to get it back to normal, but now basic messaging app doesn't work. Any ideas?
Koreankoga said:
Thank, its was somewhat able to get it back to normal, but now basic messaging app doesn't work. Any ideas?
Click to expand...
Click to collapse
Try doing a factory reset in the stock recovery
Sent from my Nexus 5 using XDA Free mobile app
I have a Samsung galaxy s4 running 4.2.2 AT&T, Recently I used triangle away and SuperSu to get rid of root and to get the official device status. I went into Odin and it said failure and I noticed that it said custom in the device status. So then I went to motorchopper how I rooted in the first place and did that and it also said "rooting... Failure" so now the questions is how do I get root access back so I can unroot it and then flash the official 4.2.2 and then get 4.4.2?
Flashing 4.2.2 in Odin will remove root. Why do you want to go to 4.4.2? You will no longer be able to use twrp or cwm if you do.
Sent from my Nexus 5 using XDA Free mobile app
Oh I didn't know that well thanks for the info, I'll stay on 4.2.2 then. Now my problem if when I goto motorchopper after it installs the SuperSu it waits and then fails. From what I read that means I'm still technically rooted but idk. Also idk if the status has anything to do with it but it still says custom instead of offical
OhDreamsNo said:
Oh I didn't know that well thanks for the info, I'll stay on 4.2.2 then. Now my problem if when I goto motorchopper after it installs the SuperSu it waits and then fails. From what I read that means I'm still technically rooted but idk. Also idk if the status has anything to do with it but it still says custom instead of offical
Click to expand...
Click to collapse
I don't know what the current status of your device is or what you're ultimately trying to achieve. But I would recommend you stay on 4.2.2, mdl, firmware and flash a 4.4.2 custom rom.
Sent from my Nexus 5 using XDA Free mobile app
Well OK here is what I want to do now, I want to re-root my 4.2.2. Thought when I use the moterchopper method it says failure right after it installs SuperSU for you. Now I'm stuck and don't really know what to do! I would love to know some way to fix this
OhDreamsNo said:
Well OK here is what I want to do now, I want to re-root my 4.2.2. Thought when I use the moterchopper method it says failure right after it installs SuperSU for you. Now I'm stuck and don't really know what to do! I would love to know some way to fix this
Click to expand...
Click to collapse
Does the device boot and can you check if you still have a custom recovery and whether you're rooted or not
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Does the device boot and can you check if you still have a custom recovery and whether you're rooted or not
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
The device does boot, root checker says I have not root, and I believe I don't have a custom. Recovery b/c when I do power/down volume it bring me to download mode and power/up brings me into the regular recovery menu
OhDreamsNo said:
The device does boot, root checker says I have not root, and I believe I don't have a custom. Recovery b/c when I do power/down volume it bring me to download mode and power/up brings me into the regular recovery menu
Click to expand...
Click to collapse
I think at this point I'd flash the stock 4.2.2 firmware from sammobile.com in Odin and start over. But watch out for the device wanting to update itself after the Odin flash. If it does you'll lose the ability to use twrp or cwm. To avoid it, root with motorchopper, but on a custom recovery and flash a custom Rom. There also three files you can freeze our delay on the device that neuteres the updates. I only remember one of them, FWUpgrade
Sent from my Nexus 5 using XDA Free mobile app