Database Users

[Q] NEED HELP! My S4 doesn't like ROMs above 4.2.2. WHY ???

Hi,
It looks like my phone doesn't like ROMs above 4.2.2. All the ROMs i flashed, have a signal problem and occasionally, the WiFi doesn't work.
I've tried to change the modem but whatever version i try... i cannot change it. My baseband (XXUBMG7) is the same.
Now i have flashed via ODIN (as a last resort cause i didn't know what else to flash or try) and lost root and all, the official version available for my country (Romania) hoping for a resolution but... no chance :crying:.
As you can see in the picture... when i turn the screen on, i have no signal. Tho i can receive calls when my screen is off.
After a while my signal appears and i can make phone calls.
I can's stay like this... please help! Any suggestions ?

- Install Custom recovery (CWM or Philz Touch or TWRP) with Odin
------------
- Open Odin
- Shutdown ur phone and go to Download Mode
- Untick Autoreboot
- Flash modem -> HERE via Odin (button PDA/CP)
- Take the battery off and put it in again
- Reboot into Download Mode using (Vol Down plus Home button combi) again
- Flash Modem once more
- Once done, unplug then reboot device manually (Take the battery off and put it in again)
- It will change ur BASEBAND

I tried to flash alot of modems but none of them work (
Sometimes it sais it is installed, sometimes it asks for the PIT file.
I am stuck on baseband XXUBMG7 (

Joku1981 said:
- Install Custom recovery (CWM or Philz Touch or TWRP) with Odin
- Flash this file -> HERE with the recovery
- Reboot ur phone
- Tell us how it works
Click to expand...
Click to collapse
via Odin !
MamaDraq said:
I tried to flash alot of modems but none of them work (
Sometimes it sais it is installed, sometimes it asks for the PIT file.
I am stuck on baseband XXUBMG7 (
Click to expand...
Click to collapse
Okey listen mate , Download and extract this file http://www.mediafire.com/downloady/kyx5khowhd7yzel/I9505XXUEMKF_MODEM.zip When your done "Turn Of your Phone manually" Remove your battery for 10 sec and put it back ! Press and hold Power+Volume Down In order to reach Download mode , Open odin select Phone/CP (Find the file you extract) put both cable and (check odin if it says com4 with blue color on it) press start and let it do its job , once done your phone will reboot and remove the cables.Now go to your phone setting > More> Device info> and check the baseband if it change. Have a nice day.

MamaDraq said:
I tried to flash alot of modems but none of them work (
Sometimes it sais it is installed, sometimes it asks for the PIT file.
I am stuck on baseband XXUBMG7 (
Click to expand...
Click to collapse
when you are flashing a modem, flash twice the same modem and then reboot manually

Can't flash any modem?

Hello guys,
I don't know how and why I can't flash any modems with odin.
I tried many times on many roms and every time it was successful. But when I check my baseband it's always MJ5 modem.
How can that be?
Sorry for my bad English. I'm german.
Sincerely MrClaver
Sent from my GT-I9505 using xda app-developers app

mrclaver said:
Hello guys,
I don't know how and why I can't flash any modems with odin.
I tried many times on many roms and every time it was successful. But when I check my baseband it's always MJ5 modem.
How can that be?
Sorry for my bad English. I'm german.
Sincerely MrClaver
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
Try this one mate
Turn off your phone and Boot into downloadmode
Open Odin
Untick Autoreboot
Select Phone/CP (.Tar file)
Connect both cables
Flash modem
Reboot once again into Download Mode using (Power+Voldown)
Flash Modem once more
Once done,unplug then reboot device manually.
If this doesn't work, try repeating the flash process again while rebooting manually and with auto-reboot option turned off.

The important thing is (as Repulsa says) to MANUALLY boot into download mode, do NOT use any options from an extended power menu.

Repulsa said:
Try this one mate
Turn off your phone and Boot into downloadmode
Open Odin
Untick Autoreboot
Select Phone/CP (.Tar file)
Connect both cables
Flash modem
Reboot once again into Download Mode using (Power+Voldown)
Flash Modem once more
Once done,unplug then reboot device manually.
If this doesn't work, try repeating the flash process again while rebooting manually and with auto-reboot option turned off.
Click to expand...
Click to collapse
Hey wow,
it worked for me! You're the best! :good:
SSThing said:
The important thing is (as Repulsa says) to MANUALLY boot into download mode, do NOT use any options from an extended power menu.
Click to expand...
Click to collapse
Thank you.

[Q] Grand Prime boot problem

I have Galaxy Grand prime duos stuck at booting animation
I try to enter recovery mode (press and hold the Volume Up, Home and Power buttons together till Samsung logo flash twice then leave Power button) but it keeps restarting and i can't reach recovery mode
any help plz

No one answered me
my mobile still dying :crying:

I think u have to press volume - instead of volume +..
if still it don't open.
Try to flash a new rom from download mode..

Your rom get corrupted you been to flash a New rom trought odin and download Mode in the device

Fixing
Hello ..
*Your current firmware is looks to be damaged or corrupted
*You need to flash the official Firmware again using ODIN software
------------------------------------------------------------------------------------
*Download the latest Compatible ODIN Version With Galaxy Grand Prime
---> goo.gl/cjglQW
*Download the latest Firmware available for the Galaxy Grand Prime [25/1/2015]
---> goo.gl/Vq8dvt
-------------------------------------------------------------------------------------
*Download Both files ..
*Run ODIN
*Put your device into the Download mode (Power+Home+Volume Down)
*Flash your new Firmware
*Wait ..! Done !
*Enjoy

check url
louis0 said:
I have Galaxy Grand prime duos stuck at booting animation
I try to enter recovery mode (press and hold the Volume Up, Home and Power buttons together till Samsung logo flash twice then leave Power button) but it keeps restarting and i can't reach recovery mode
any help plz
Click to expand...
Click to collapse
AmGaD-SaLaH said:
Hello ..
*Your current firmware is looks to be damaged or corrupted
*You need to flash the official Firmware again using ODIN software
------------------------------------------------------------------------------------
*Download the latest Compatible ODIN Version With Galaxy Grand Prime
---> goo.gl/cjglQW
*Download the latest Firmware available for the Galaxy Grand Prime [25/1/2015]
---> goo.gl/Vq8dvt
-------------------------------------------------------------------------------------
*Download Both files ..
*Run ODIN
*Put your device into the Download mode (Power+Home+Volume Down)
*Flash your new Firmware
*Wait ..! Done !
please check URL website
Click to expand...
Click to collapse

kindly give again the website of the firmware.. thankyou

Look at my grand prime original developers where I show to flash and from where to downloads firmware

You'd better download a firmware backup of your Handheld and install Odin in your PC in case there's something wrong happens in your device.
Sent from my SM-G530H using XDA Free mobile app

i have hold the power botton and home botton but it only boot to factory mode please help me

nelvicv3 said:
i have hold the power botton and home botton but it only boot to factory mode please help me
Click to expand...
Click to collapse
Home, Volume Down and Power buttons.

Abd El -Rahman Alswaf said:
AmGaD-SaLaH said:
Hello ..
*Your current firmware is looks to be damaged or corrupted
*You need to flash the official Firmware again using ODIN software
------------------------------------------------------------------------------------
*Download the latest Compatible ODIN Version With Galaxy Grand Prime
---> goo.gl/cjglQW
*Download the latest Firmware available for the Galaxy Grand Prime [25/1/2015]
---> goo.gl/Vq8dvt
-------------------------------------------------------------------------------------
*Download Both files ..
*Run ODIN
*Put your device into the Download mode (Power+Home+Volume Down)
*Flash your new Firmware
*Wait ..! Done !
please check URL website
Click to expand...
Click to collapse
Go here http://www.sammobile.com/firmwares/
Make account and search your model number ie; sm-g531h
Click to expand...
Click to collapse

grand prime 4g
nelvicv3 said:
i have hold the power botton and home botton but it only boot to factory mode please help me[/QUO
check once by changing touch display...or remove touch connector from display and try on.....
Click to expand...
Click to collapse

EXACTLY!!!!!
louis0 said:
I have Galaxy Grand prime duos stuck at booting animation
I try to enter recovery mode (press and hold the Volume Up, Home and Power buttons together till Samsung logo flash twice then leave Power button) but it keeps restarting and i can't reach recovery mode
any help plz
Click to expand...
Click to collapse
Yes bro i am facing same problem i cant reach my bootloader option. plz help us guyz

Devansh11 said:
Yes bro i am facing same problem i cant reach my bootloader option. plz help us guyz
Click to expand...
Click to collapse
Try to enter download mode. HOME+VOLUME DOWN + POWER
Also when entering either recovery or download mode I find it helps to hold HOME+VOLUME UP and then press POWER.
If you can enter download mode but not recovery maybe your recovery is corrupt, reflash your firmware using ODIN

Well that literally happened to me and I fixed it by installing a custom recovery but its cuz of installing a wrong root version for android. U can flash a custom recovery and tell us.

ty bro
u0aol said:
Home, Volume Down and Power buttons.
Click to expand...
Click to collapse
CAN u plz tell how to reinstall flash

Devansh11 said:
CAN u plz tell how to reinstall flash
Click to expand...
Click to collapse
www.sammobile.com/tag/galaxy-grand-prime - Download the correct firmware for your device.
Ensure all of the Samsung USB drivers have been installed on your computer.
Place your phone into download mode (Home+Volume Down+ Power)
Open ODIN on your computer (Version 3.10 works best for the Grand Prime, but the newest version would be optimal)
Plug your USB cable into your cellphone and into your computer.
ODIN will say *ADDED* in its text output.
Press AP or PDA (Depending on ODIN version)
Select your downloaded firmware packet (It is either a .md5 file or a .md5.tar)
Press start and ODIN will automatically flash your firmware for you.
ODIN will say *SUCCESS* if completed and will automatically restart your phone.
Wait until your phone boots.
That is how you flash firmware using ODIN. I hope it helps.
Please in future search these forums as there are a hundred different tutorials on flashing.
:good::good:
---------- Post added at 04:46 AM ---------- Previous post was at 04:36 AM ----------
Honex98 said:
Well that literally happened to me and I fixed it by installing a custom recovery but its cuz of installing a wrong root version for android. U can flash a custom recovery and tell us.
Click to expand...
Click to collapse
Corrupting your recovery is NOT an issue that would happen because of a bad flash of root files.
Flashing a custom recovery such as TWRP will NOT solve issues with root or any issues caused by flashing the wrong root file.
Firmware corruption caused by flashing an incorrect root file is only fixable by reflashing your firmware and starting from the begining, custom recovery has nothing to do with that.
TWRP makes it easier to fix the issue, but it is not itself a fix for the issue.

hi i am using grand prime galaxy . but i got some text with blue and red it shows muticore odin mode etc

i am not able to enter recovery mode of smG530h
i can enter recovery mode of my smg 530h dous it just reboot and also dont show anything after rebooting black screen appears it is going in download mode pls help me :crying::crying::crying::crying:

Issue regarding flash twrp recovery

I`m not able to flash twrp recovery in my phone Odin pass flashing process but phone wont boot in twrp recovery please help

Salmaster007 said:
I`m not able to flash twrp recovery in my phone Odin pass flashing process but phone wont boot in twrp recovery please help
Click to expand...
Click to collapse
See atfirst check that twrp is for ur android version or not.means there is different twrp available for different version.else mention ur model no i ll give u that link.before that in development mode unlock the oem.else it will show custom binary by frp lock.then flash the recovery twrp via odin 12.3 for mm or odin 10.6 for lollipop.enjoy

aslam4580 said:
See atfirst check that twrp is for ur android version or not.means there is different twrp available for different version.else mention ur model no i ll give u that link.before that in development mode unlock the oem.else it will show custom binary by frp lock.then flash the recovery twrp via odin 12.3 for mm or odin 10.6 for lollipop.enjoy
Click to expand...
Click to collapse
developer option is enable
OEM unlock is enable
USB debugging is enable
Model no. is SM-J500F.Device is currently running on marshmallow 6.0.1
please help

Salmaster007 said:
developer option is enable
OEM unlock is enable
USB debugging is enable
Model no. is SM-J500F.Device is currently running on marshmallow 6.0.1
please help
Click to expand...
Click to collapse
Ok bro.as ur information,here i have attached both odin and recovery twrp for ur mobile.just download both file and copy to ur pc.then extract odin and run as adminstrator.in ap select that recovery file afterwards put ur mobile in download mode and start.afterwards it will reboot then again turnoff ur phone and press (power off+middle button+volume up) button together.
Then u ll get twrp...nd enjoy bro
Download link for recovery:https://mega.nz/#!MkMlXS7Q!KoTmoNDKE_Ok1T2sEG4GA-1SBJXsnz6y1zV2iRTLbZk
Download link for odin:https://mega.nz/#!sxkXRSaJ!eP9mI8y4Z9Mxqu2cKLm4vjQ1PcoXE_iyq7eiKQtuUlg
Its for 2015 j500f mm version and i have checked both file is working fine.

aslam4580 said:
Ok bro.as ur information,here i have attached both odin and recovery twrp for ur mobile.just download both file and copy to ur pc.then extract odin and run as adminstrator.in ap select that recovery file afterwards put ur mobile in download mode and start.afterwards it will reboot then again turnoff ur phone and press (power off+middle button+volume up) button together.
Then u ll get twrp...nd enjoy bro
Download link for recovery:https://mega.nz/#!MkMlXS7Q!KoTmoNDKE_Ok1T2sEG4GA-1SBJXsnz6y1zV2iRTLbZk
Download link for odin:https://mega.nz/#!sxkXRSaJ!eP9mI8y4Z9Mxqu2cKLm4vjQ1PcoXE_iyq7eiKQtuUlg
Its for 2015 j500f mm version and i have checked both file is working fine.
Click to expand...
Click to collapse
Still Im facing same issue

Which recovery are you using ? The one from Nick Verse won't work with the secure bootloader of the latest Mashmallow updates , when I tried i could not boot into recovery using that one ...
The one from this thread is working perfectly for me at the moment :
http://forum.xda-developers.com/galaxy-j5/development/recovery-samsung-galaxy-j500f-t3416960

Try the twrp made by ganesh varma.

1-in odin Untick Auto reboot option.
2-After flushing twrp by Odin, remove the battery and insert it again .
3- press volume up+ home+power button to go to twrt.
4- install supersu.zip
I had this issue on j5h but after doing that i could root my phone.

Thanks Guys for your help..

S3 neo GT-I9301I wont boot after wrong firmware

Hi
How are you?
I have flashed my phone with wrong firmware accidentally.
This the firmware i have used
https://androidfilehost.com/?fid=746163614322275276
I can only go to Download mode (No recovery mode or boot)
but when i go to download mode the product name is GT-I9300I
Any help

I manage to solve the product name in Download Mode and now it's showing GT-I9301I
but the phone is still not boot with booloop and no recovery mode.
Any help

alaa92 said:
I manage to solve the product name in Download Mode and now it's showing GT-I9301I
but the phone is still not boot with booloop and no recovery mode.
Any help
Click to expand...
Click to collapse
download the right rom and flash it with odin

abdullah1038 said:
download the right rom and flash it with odin
Click to expand...
Click to collapse
I have tried to flahs it with multiple rom but same problem
Also i have tried a repair firmware (4 files) but same problem
It's just keep rebooting with blue text on top (Recovery booting.....)
Any help

any help please

alaa92 said:
any help please
Click to expand...
Click to collapse
try this it might work
download this file and extract it
http://allmobilesoft.com/zip/uploads/2016/12/I9301I-PIT-File-allmobilesoft.com_.rar
connect your phone with odin and click pit
and select the extracted file
click on repartition
click on pda and select the right rom for your phone
then click start it will take about 20 minutes.
remember i am not responsible if you bricked your device.

Finally i have managed to fix the phone.
I have extract the boot.img from firmware then flash it using odin without reboot
then install repair firmware
this the firmware i have used
i9301iXXUANF5_OJVUANF1_Arabic_v4.4.2_Repair_Firmware_FULL_4Files.zip
The method i have found it:
1- flash the phone with repair firmware. (i9301iXXUANF5_OJVUANF1_Arabic_v4.4.2_Repair_Firmware_FULL_4Files.zip)
2- after flashing the phone will dead (Black screen without rcovery mode or download mode or any thing). so i have insert the usb cable then remove the battery then reinsert the battery with keep pressing volume up + home button
3- you will enter the recovery mode.
4- then you have to wipe/factory reset data then reboot.

alaa92 said:
Finally i have managed to fix the phone.
I have extract the boot.img from firmware then flash it using odin without reboot
then install repair firmware
this the firmware i have used
i9301iXXUANF5_OJVUANF1_Arabic_v4.4.2_Repair_Firmware_FULL_4Files.zip
The method i have found it:
1- flash the phone with repair firmware. (i9301iXXUANF5_OJVUANF1_Arabic_v4.4.2_Repair_Firmware_FULL_4Files.zip)
2- after flashing the phone will dead (Black screen without rcovery mode or download mode or any thing). so i have insert the usb cable then remove the battery then reinsert the battery with keep pressing volume up + home button
3- you will enter the recovery mode.
4- then you have to wipe/factory reset data then reboot.
Click to expand...
Click to collapse
i9300I= dual sim
i9301i= one sim
download mod or model label under battery is not matter
if your phone dual sim flash i9300i or if one sim flash by i9301i file. just thish

Worng Firmware I9300I, right firmware is I9301I
I Have Same Problem
Please Help Me
---------- Post added at 02:15 PM ---------- Previous post was at 02:09 PM ----------
Hi
How are you?
I have flashed my phone with wrong firmware accidentally.
This the firmware i have used
I9300I
I can only go to Download mode (No recovery mode or boot)
but when i go to download mode the product name is GT-I9300I
Any help

kernel is not seandroid enforcing galaxy s3 neo I9301I
Accidentally Flash complied Firmware I9300I file
When I am Downloading Mode Their Is Product Nam : I9300I
how to flash it
Please
Help Me