I've been trying using KDZ to install a rootem V20D rom on my phone. I've installed msxml (until sp3), Windows Enabler, USB driver and all, but during the installation, I get Wparam:100 Lparam:1010 error
The phone gets stucked into Emergency Mode and I don't know how to go on. What should I do?
Related
Hi all,
Maybe someone find a solution...current issues
Phone is LG G2 D802 32GB
1.Only LG Logo is visible while phone is powered on
2.I can turn on download mode but it's not work on pc (device is not recognized)
3.Recovery Mode not available
4.I can do a factory reset but nothing happens
5.ADB,Fastboot device not found (Trying various drivers for connecting to pc)
6.When I connect phone to PC is recognized as LGE Mobile USB Serial port
7.in LG Flash Tool 2014 I can do something.Changed port to 41 in device manager.Yesterday when I tried to flash it was typing "Model information check failed"
I think I've tried everything any help pls?
No one
help
i have the some problem help please:crying:
I'm able to start software update in LG Mobile support tool via Flash tool (KDZ Method) only up to 4% and only while CSE Flash / CDMA is checked then I've got an some error which I can't read due to bad letter format.Maybe it's because I'm not in download mode, but in normal mode (only way to recognized by pc as LGE USB MODEM)?
starshar said:
i have the some problem help please:crying:
Click to expand...
Click to collapse
Maybe I've found a solution here .I will try this method soon...
Hi Guys,
When updated my LG L5 E610v with LG Mobile support tool, it stucks in 'Download is in progress. Don not disconnect cable.
Tried a lot to fix this problem, no results.
I figured out that using adb, fastboot, PDAnet, LG suite, LG mobile support tool, kdz updater, a lot of different usb cables, button combinations, shake the phone, etc, my pc (and all software I used to connect) do not recognice my phone properly or not. For example: using adb, i get: device not found, etc.
I installed the right lg usb driver properly and see on device manager 'Modem' and 'usb device' installed. Seems to me, no proble at all !!!
Who wants to help me to figured out this problem ??? To say this, I am a noob with this problem.
Thx in advanced,
Ron
The Netherlands
HELLO everyone, i have a big problem in my phone LG OPTIMUS L3 E400
i use KDZ UPDATER and update my phone with wrong kdz file and now My phone does not work and not allowed to go to EMERGENCY MODE
I hope you will give me the solution to back my phone and thank you guys and i will wait for the answer....
I was having problems with my l5 going into emergency mode. It was working, then stopped working for an unknown reason. I believe the device has to detect the correct handshake with the PC before it will enter into emergency download mode. Windows 7 has a hard time managing many things, LG Android drivers are one of them. Try uninstalling and reinstalling LG unified drivers (try older versions?) different usb ports, rebooting PC, etc.
I spent untold hours trying to get my phone to do what it had done previously, only to mysteriously work again.
my g2 stuck on the lg logo
I can access download mode
but the computer doesnt recognize the device
I installed the lg drivers and its didnt change a thing
i got error that these drivers are not found:
"lge android phone"
"cdc serial"
"cdc ecm"
if I can pass that problem then i could flash new rom and fix the phone
how do i fix it?
Hey there guys!!!
Can you please help me with this?
Yesterday i tried to install a new ROM on my LG Android phone (My LG phone is not working properly, it has a reboot loop). I tried to do a factory reset without success -> the dead Android logo appeared :/
I put my phone in Download Mode and connected to the pc but Windows does not recognize my phone.. it says: "USB device not recognized.. the last USB device you connected to this computer malfunctioned and Windows does not recognize it"
I do not know what to do now.. when i try to flash a ROM with the LG Flash Tool it fails because LG program does not recognize my device..
PS: LG Support Tool recognizes my phone (it shows the model) but i cannot flash a ROM
Thanks!!:fingers-crossed: