Related
I just purchased a new AT&T Galaxy S4 via Amazon. Came with MDB software installed. I used the CASUAL root procedure and was successful. That left me with rooted MDB + TWRP recovery.
I am intending to stay with a stock ROM, not a complete custom ROM.
My question is: Should I try to update to a newer version of software? I believe right now I am two releases behind (MDB -> MDL -> MF3?)
I haven't been able to find much talking about the MDL version, so I don't know if there is anything useful in it (perhaps radio updates?). I did see some references to a performance enhancement which is always good.
I'm assuming I want to stay away from MF3 as there seems to be a lot of rapidly changing/conflicting information at this point about if and how one can get to that release (and keep root).
If I wanted to go to the MDL version, how would I go about it? I found two threads here:
http://forum.xda-developers.com/showthread.php?t=2348859&highlight=mdl
http://forum.xda-developers.com/showthread.php?t=2307157&highlight=mdl
Preferably, this would be done just as an update instead of wiping what I have now. But neither of those threads indicate if a wipe is necessary or if they can simply be installed on top of the stock MDB.
Appreciate any feedback!
cabadam said:
I just purchased a new AT&T Galaxy S4 via Amazon. Came with MDB software installed. I used the CASUAL root procedure and was successful. That left me with rooted MDB + TWRP recovery.
I am intending to stay with a stock ROM, not a complete custom ROM.
My question is: Should I try to update to a newer version of software? I believe right now I am two releases behind (MDB -> MDL -> MF3?)
I haven't been able to find much talking about the MDL version, so I don't know if there is anything useful in it (perhaps radio updates?). I did see some references to a performance enhancement which is always good.
I'm assuming I want to stay away from MF3 as there seems to be a lot of rapidly changing/conflicting information at this point about if and how one can get to that release (and keep root).
If I wanted to go to the MDL version, how would I go about it? I found two threads here:
http://forum.xda-developers.com/showthread.php?t=2348859&highlight=mdl
http://forum.xda-developers.com/showthread.php?t=2307157&highlight=mdl
Preferably, this would be done just as an update instead of wiping what I have now. But neither of those threads indicate if a wipe is necessary or if they can simply be installed on top of the stock MDB.
Appreciate any feedback!
Click to expand...
Click to collapse
You cannot OTA update to MF3 without ODINing back to stock - your custom recovery will prevent the update from working.
If you want to update to MDL, you can ODIN the stock MDL package and redo the CASUAL script.
I would suggest you stay on MDL until MF3 has not only root, but also custom recovery. At this point it's still too early to take the risk, even with a root access exploit now available.
If you want the updates, there are several ROMs available that incorporate updates...there's one that is almost completely stock MF3 without the bootloader (which is the main problem with it)...there's multiple based off of stock MF3 with some optimizations...and even some based on the latest Galaxy S4 International firmware which is several updates ahead of MF3.
Of course all that requires your willingness to install a custom ROM.
+1
I think you confirmed most of what I gathered - thanks for the clarifications.
jeffreii said:
If you want to update to MDL, you can ODIN the stock MDL package and redo the CASUAL script.
Click to expand...
Click to collapse
I did this, and it didn't do quite what I expected (although maybe it is better than I expected). I downloaded the MDL firmware from:
http://galaxys4root.com/galaxy-s4-stock-firmware/
AT&T Galaxy S4 SGH-I337 UCUAMDL (Android 4.2.2)
After flashing it with Odin, and my phone rebooted, I was surprised to note that it didn't actually WIPE my device. Everything was still in place, except now the device reports that it is in fact updated to MDL.
Is that right? I was expecting it to basically be in factory-new state after flashing.
cabadam said:
I think you confirmed most of what I gathered - thanks for the clarifications.
I did this, and it didn't do quite what I expected (although maybe it is better than I expected). I downloaded the MDL firmware from:
http://galaxys4root.com/galaxy-s4-stock-firmware/
AT&T Galaxy S4 SGH-I337 UCUAMDL (Android 4.2.2)
After flashing it with Odin, and my phone rebooted, I was surprised to note that it didn't actually WIPE my device. Everything was still in place, except now the device reports that it is in fact updated to MDL.
Is that right? I was expecting it to basically be in factory-new state after flashing.
Click to expand...
Click to collapse
Yes that's normal. It doesn't wipe your internal or external sd card. The parts you store info on
jd1639 said:
Yes that's normal. It doesn't wipe your internal or external sd card. The parts you store info on
Click to expand...
Click to collapse
Too easy, that basically gave me exactly what I wanted. I think I'm squared away until MF3 settles down.
Thanks for your time!
cabadam said:
Too easy, that basically gave me exactly what I wanted. I think I'm squared away until MF3 settles down.
Thanks for your time!
Click to expand...
Click to collapse
When you ODIN an upgrade to the same firmware, you don't get a wipe. It's nice to keep your settings in those situations!
Now just make sure you root/recovery so you can avoid the OTA...otherwise make sure you freeze the OTA apps.
jeffreii said:
When you ODIN an upgrade to the same firmware, you don't get a wipe. It's nice to keep your settings in those situations!
Now just make sure you root/recovery so you can avoid the OTA...otherwise make sure you freeze the OTA apps.
Click to expand...
Click to collapse
Haha yeah, I had spent some time backing up some settings via TB, nice to know I don't have to deal with that (at least for now )
Already re-applied the CASUAL root process. I froze the "AT&T Software Update" app. Is there anything other than that?
cabadam said:
Haha yeah, I had spent some time backing up some settings via TB, nice to know I don't have to deal with that (at least for now )
Already re-applied the CASUAL root process. I froze the "AT&T Software Update" app. Is there anything other than that?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=44022554&postcount=74
Hmm, so I went and also froze LocalFOTA, but I dont have anything called FW Upgrade
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Good post.
I'm also on MDB. Do you think it's actually worth it to install the MDL update?
I'm currently running Kangabean with 4.3, if it matters.
Do not update ota may bypass mdl and go to mf3
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
deron37129 said:
Do not update ota may bypass mdl and go to mf3
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Nope. Would flash the MDL through Odin and immediately run Motochopper. Just trying to figure out if it's even worth it.
trunzoc said:
Nope. Would flash the MDL through Odin and immediately run Motochopper. Just trying to figure out if it's even worth it.
Click to expand...
Click to collapse
Definitely worth it. MDL irons out the issued that the S4 had upon release.
Sent from my SGH-I337 using Tapatalk 4
sd_N said:
Definitely worth it. MDL irons out the issued that the S4 had upon release.
Sent from my SGH-I337 using Tapatalk 4
Click to expand...
Click to collapse
Thanks!.
Here goes nothing
***EDIT***
Flashed the MDL image. I pulled the SIM to avoid any kind of OTA crap and booted. Got stuck at the AT&T logo though.
I had to go into stock recovery and do a factory reset. Did that and it booted up. Ran Motochopper fine and was able to boot into TWRP.
I restored by backup, but wouldn't boot past the Samsung Logo. Did another factory reset, but still wouldn't boot. Restored a backup I had of rooted stock. That worked.
Reset again and reinstalled Kangabean from scratch. That worked. Went back to recovery again and just restored my data partition. that worked too. yay
Pain in the arse, but let's see if MDL has any noticeable differences.
Thank you ALL!! I am also on MDB firmware and was wondering about all of this.
I do have some questions if you don't mind. (sorry for the thread hijack)
On MDB firmware, can you install a stock modded rom w/o updating the firmware?(such as MDOB and Goldeneye)
Is the MDB modem compatible with these roms or will I have to flash to a newer firmware to use them?
Knowing its working perfectly now, I'd like to stick with my current setup, but Id like the ability to use a stock modded TW rom, as I have a Samsung smart TV and use most of the Samsung bloatware.
Is there really any reason to go to MDL over MDB?
custommx3 said:
Thank you ALL!! I am also on MDB firmware and was wondering about all of this.
I do have some questions if you don't mind. (sorry for the thread hijack)
On MDB firmware, can you install a stock modded rom w/o updating the firmware?(such as MDOB and Goldeneye)
Is the MDB modem compatible with these roms or will I have to flash to a newer firmware to use them?
Knowing its working perfectly now, I'd like to stick with my current setup, but Id like the ability to use a stock modded TW rom, as I have a Samsung smart TV and use most of the Samsung bloatware.
Is there really any reason to go to MDL over MDB?
Click to expand...
Click to collapse
Check the roms you want to use. Most of them require mdl firmware.
sorry if this is an old question.
well im using an sgh i337 at&t,
im in 4.2.2 MF3, it's rooted an using safestrap
my problem is that whenever i try to flash a 4.3 TW rom
(Goldeneye) in another rom slot, it just seems its not working, is not even booting. i also tried flashing an aosp based room. p.a.c or dirty unicorn rooms, same result.
so i just saw a post saying at&t has 4.3 since november 13, i would like to know how to get it. i mean, maybe im doing something wrong with safestrap. what if i try ota upgrading and it briks my phone? i dont even know if 4.3 worths loosing my root, which i dont know if i could achieve to use in 4.3
so resumeing my questions are.
am i missunderstanding safestrap flashing procedures?
is there a root for 4.3?
how can i get 4.3 for my phone? (safestrap room, odin upgrade, ota upgrade)
is there a custom recovery for 4.3?
any help please?
AT&T pulled the 4.3 update to smooth out some "issues." ETA for the re-released update is anyone's guess but will probably happen "soon."
You can only use TouchWiz-based 4.2.2 ROMs on MF3 with Safestrap.
I'd never flash anything more recent than MF3 if you have any desire to ever run custom ROMs or unlock the bootloader. This is pretty much the rule of thumb with any new release with a locked bootloader.
It's a safe assumption each new release from AT&T will only lock this phone down *more.* Unless Samsung comes up with an official bootloader unlock process similar to HTC, it will only get harder to customize the phone after an upgrade.
GRGC25 said:
sorry if this is an old question.
well im using an sgh i337 at&t,
im in 4.2.2 MF3, it's rooted an using safestrap
my problem is that whenever i try to flash a 4.3 TW rom
(Goldeneye) in another rom slot, it just seems its not working, is not even booting. i also tried flashing an aosp based room. p.a.c or dirty unicorn rooms, same result.
so i just saw a post saying at&t has 4.3 since november 13, i would like to know how to get it. i mean, maybe im doing something wrong with safestrap. what if i try ota upgrading and it briks my phone? i dont even know if 4.3 worths loosing my root, which i dont know if i could achieve to use in 4.3
so resumeing my questions are.
am i missunderstanding safestrap flashing procedures?
is there a root for 4.3?
how can i get 4.3 for my phone? (safestrap room, odin upgrade, ota upgrade)
is there a custom recovery for 4.3?
any help please?
Click to expand...
Click to collapse
Update ypu trying to use in slot is not full rom, just like you say UPDATE. This is patch to 100% stock rom. This will not work in SS slot.
auch
i feel like something died inside of me
GRGC25 said:
i feel like something died inside of me
Click to expand...
Click to collapse
It was that taco bell burrito you ate
Sent from my SAMSUNG-SGH-I337 using xda premium
[email protected] said:
It was that taco bell burrito you ate
Sent from my SAMSUNG-SGH-I337 using xda premium
Click to expand...
Click to collapse
Lol. no taco bell in mexico, but i like carnaza tacos
Hello,
What is the best way to get back to complete stock (including locked bootloader). I'm done with playing with custom ROMs (running CM11 right now). I want stock and guaranteed stability then nightmare dealing with nightlies etc.
artisticcheese said:
Hello,
What is the best way to get back to complete stock (including locked bootloader). I'm done with playing with custom ROMs (running CM11 right now). I want stock and guaranteed stability then nightmare dealing with nightlies etc.
Click to expand...
Click to collapse
I'm guessing you're on an I337 since you mentioned locked bootloader. If I were you I'd just flash a 4.4.2 stock ROM so that you can keep the possibility to use AOSP ROMs like the Google Edition ROMs and others. You can flash the ROM from HERE, use the version that doesn't say wBL at the end. Then just flash one of the 4.4.2 modems in RockRatt's I337 modem thread and it should work just fine. You could even reflash the MDL firmware before all of this to make it clean, or even just freeze the updater and stay on MDL.
If you really want to get rid of all possibility of running more than themed and modded TouchWiz ROMs, you can simply go to the General section, find the NB1 ODIN files, and flash them. If you want root after that, take the OTA to NC1 or sideload it and then use towelroot.
DeadlySin9 said:
I'm guessing you're on an I337 since you mentioned locked bootloader. If I were you I'd just flash a 4.4.2 stock ROM so that you can keep the possibility to use AOSP ROMs like the Google Edition ROMs and others. You can flash the ROM from HERE, use the version that doesn't say wBL at the end. Then just flash one of the 4.4.2 modems in RockRatt's I337 modem thread and it should work just fine. You could even reflash the MDL firmware before all of this to make it clean, or even just freeze the updater and stay on MDL.
If you really want to get rid of all possibility of running more than themed and modded TouchWiz ROMs, you can simply go to the General section, find the NB1 ODIN files, and flash them. If you want root after that, take the OTA to NC1 or sideload it and then use towelroot.
Click to expand...
Click to collapse
So if I flash one of NB1 ODIN files my phone will looks like something I get from ATT store if I walk in there today, right? That's what I want to achieve, completely something unadultered.
artisticcheese said:
So if I flash one of NB1 ODIN files my phone will looks like something I get from ATT store if I walk in there today, right? That's what I want to achieve, completely something unadultered.
Click to expand...
Click to collapse
Yes, it will be just like the others in every way, knox bootloader and settings and all, no custom flags or anything.
Just got my I337, using with simple mobile. Managed to sim unlock via this method, and was feeling pretty good. I think I had (have?) MK2. So using the stock ROM, it kept on asking to autoupdate. Didn't know if that would screw anything up, so attempted to install a kitkat venom ROM. I now can't get out of safestrap recovery. I'm not sure if the issue was trying to install a kitkat ROM, or if I mistakenly put it in the primary ROM slot. Anyway, I'm on a linux box without any immediate access to windows, so it looks like ODIN is out of the question. Been scouring the forums, but I have a few questions:
1. What are the limitations of the locked bootloader? Not really sure what I'm sidestepping by using a custom recovery. I had read that it limited me to TW ROMS (which is fine by me actually), but I see AOSP and other ROMs posted...
2. What exactly is meant by MK2, NC1, MF3, etc? I understand that they are progressions of SOMETHING, but not sure what--guessing it's the whole AT&T update, including ROM, modem, kernel? And I can't seem to find what exactly the progression is...
3. Is there a ROM that I should try to flash to get me back up and running before I start trying to screw with something else? Like I said, I have access to safestrap 2.71, adb, and an SD card, so I feel like this shouldn't be TOO hard to fix
nola mike said:
Just got my I337, using with simple mobile. Managed to sim unlock via this method, and was feeling pretty good. I think I had (have?) MK2. So using the stock ROM, it kept on asking to autoupdate. Didn't know if that would screw anything up, so attempted to install a kitkat venom ROM. I now can't get out of safestrap recovery. I'm not sure if the issue was trying to install a kitkat ROM, or if I mistakenly put it in the primary ROM slot. Anyway, I'm on a linux box without any immediate access to windows, so it looks like ODIN is out of the question. Been scouring the forums, but I have a few questions:
1. What are the limitations of the locked bootloader? Not really sure what I'm sidestepping by using a custom recovery. I had read that it limited me to TW ROMS (which is fine by me actually), but I see AOSP and other ROMs posted...
2. What exactly is meant by MK2, NC1, MF3, etc? I understand that they are progressions of SOMETHING, but not sure what--guessing it's the whole AT&T update, including ROM, modem, kernel? And I can't seem to find what exactly the progression is...
3. Is there a ROM that I should try to flash to get me back up and running before I start trying to screw with something else? Like I said, I have access to safestrap 2.71, adb, and an SD card, so I feel like this shouldn't be TOO hard to fix
Click to expand...
Click to collapse
Well, fixed my problem, though still don't have all the answers to my questions. I couldn't find a way to unbork without odin. Luckily my mom was in town visiting, and had a windows box that I used--I think I would have been hosed otherwise. Anyway, managed to revert to MK2 stock, and then upgrade to Goldeneye kit kat ROM via this method (my baseband is now listed as xxxxxxMLD).
I guess that MLD/NC1/NB1/MK2 are just ROM/radio firmware versions (kernel too, or is that completely unchangeable)? Still don't know the exact order of release, and if anyone could enlighten me a bit as to my other questions, I'd appreciate it...
I'll probably hold off on trying to change anything else until I have reliable access to windoze, unless someone can give me the steps using linux/adb.
nola mike said:
Well, fixed my problem, though still don't have all the answers to my questions. I couldn't find a way to unbork without odin. Luckily my mom was in town visiting, and had a windows box that I used--I think I would have been hosed otherwise. Anyway, managed to revert to MK2 stock, and then upgrade to Goldeneye kit kat ROM via this method (my baseband is now listed as xxxxxxMLD).
I guess that MLD/NC1/NB1/MK2 are just ROM/radio firmware versions (kernel too, or is that completely unchangeable)? Still don't know the exact order of release, and if anyone could enlighten me a bit as to my other questions, I'd appreciate it...
I'll probably hold off on trying to change anything else until I have reliable access to windoze, unless someone can give me the steps using linux/adb.
Click to expand...
Click to collapse
The order of firmware versions with Android version - MDB(4.2.x) -> MDL(4.2.x) - > MK2(4.3)->MLD(4.4 leak)->NB1(4.4.x)->NC1(4.4.x)
The bootloader for SGH-I337 was always locked.
1. This means that the stock kernel and recovery cannot be replaced.
2, The bootloader cannot be downgraded.
But, there was a bug in the first 2 releases, that loki exploited and provided a workaround for #1.
When flashing a firmware that contains the bootloader (aboot.mbn), it does a version check. The version check is through a fuse count maintained in the bootloader. MLD and MK2 although are different Android versions, have the same bootloader version. That means you can flash one over the other (go back and forth). The same with NB1 and NC1. But, once you update to NB1, you cannot go back to MK2.
Since the kernel cannot be replaced, all the ROMs we flash have to be compatible with the kernel that we have on the phone. Hence the mention of TW only ROMS. We cannot flash CM/AOSP/AOKP/GPE (most) ROMS. The AOSP ROMS you are seeing are themed TW roms only.
jmjoyas said:
The order of firmware versions with Android version - MDB(4.2.x) -> MDL(4.2.x) - > MK2(4.3)->MLD(4.4 leak)->NB1(4.4.x)->NC1(4.4.x)
The bootloader for SGH-I337 was always locked.
1. This means that the stock kernel and recovery cannot be replaced.
2, The bootloader cannot be downgraded.
But, there was a bug in the first 2 releases, that loki exploited and provided a workaround for #1.
When flashing a firmware that contains the bootloader (aboot.mbn), it does a version check. The version check is through a fuse count maintained in the bootloader. MLD and MK2 although are different Android versions, have the same bootloader version. That means you can flash one over the other (go back and forth). The same with NB1 and NC1. But, once you update to NB1, you cannot go back to MK2.
Since the kernel cannot be replaced, all the ROMs we flash have to be compatible with the kernel that we have on the phone. Hence the mention of TW only ROMS. We cannot flash CM/AOSP/AOKP/GPE (most) ROMS. The AOSP ROMS you are seeing are themed TW roms only.
Click to expand...
Click to collapse
Thanks for that, very enlightening.
nola mike said:
Thanks for that, very enlightening.
Click to expand...
Click to collapse
Just as an update, seems there's a workaround for Odin called heimdall, which is cross platform. . Haven't tried it, but looks like it should work.
I've spent hours searching and I know this is an old phone. Is ther anyway to root the Lollipop and download Jelly Bean (custom or stock) to it? I'm not worried about Warranties. I'm not exactly a newb and I don't like Lollipop at all. I don't mind KitKat, but what I hate is the front facing camera can't be flipped. Dumbest thing ever.
http://forum.xda-developers.com/galaxy-s4-sprint
Search for CF-Autoroot.
Strephon Alkhalikoi said:
http://forum.xda-developers.com/galaxy-s4-sprint
Search for CF-Autoroot.
Click to expand...
Click to collapse
I'm supposedly rooted. I used KingRoot and then switched over yo SuperSU. But I can't seem to get the Rom's to install. This is where I'm probably going wrong. I'm assuming it has to do with the Bootloader.
BikerSk8rKid said:
I'm supposedly rooted. I used KingRoot and then switched over yo SuperSU. But I can't seem to get the Rom's to install. This is where I'm probably going wrong. I'm assuming it has to do with the Bootloader.
Click to expand...
Click to collapse
Ask the right questions if you want the right answer.
You said you're not a newb. So what exactly was the procedure used to to install those ROMs?
Well, you should be using CF-Autoroot, as it's the recommended method to root these devices. That said, unless you have a frankenphone, only AT&T and Verizon models have locked bootloaders. Enter download mode and verify your device's model number please?
GDReaper said:
Ask the right questions if you want the right answer.
You said you're not a newb. So what exactly was the procedure used to to install those ROMs?
Click to expand...
Click to collapse
I was half asleep and stressed out when I posted this. It's been a couple weeks or longer since I messed with the phone. Damn forums weren't resetting my password. When I mean I'm not a newb I mean I'm not like brand new to this and I know how to research. I guess you could say I'm not THAT stupid. haha
I'mma have to try this again and figure out what path's I kept trying. I'm so spaced out I can't remember hard any of it. Just that I tried to flash a stock and rooted rom with old odin and new odin. Spent 2 days straight messing with it and trying to get around it. But I kept getting blocked. I didn't come across CF-Autoroot. So I'll try that.
Strephon Alkhalikoi said:
Well, you should be using CF-Autoroot, as it's the recommended method to root these devices. That said, unless you have a frankenphone, only AT&T and Verizon models have locked bootloaders. Enter download mode and verify your device's model number please?
Click to expand...
Click to collapse
Of all the researching I've done (I couldn't login) that one never showed up in my searchs. haha I'll have to give that one a try. It's been a couple weeks or longer. SPH-L720. I had a few Tri-Bands, but it seemed those were limited compared to the standard model.
Update: I went the CF-AutoRoot route and then tried to use Odin to flash stock mk2 rom. Now that I remember it kept failing everytime and then it would corrupt the current rom. I also tried using TWRP and couldn't get it to work properly.
That's a Sprint device, so your bootloader is unlocked.
Here's something you should note: If you want to flash a ROM, of any kind, you don't necessarily have to be rooted.
Stock ROMs require Odin and custom ROMs require a custom recovery. None of them require root.
Your flash to an older version fails most probably due to the fact that you're trying to downgrade the bootloader (Any stock ROM flash also modifies the bootloader and modem partitions).
But your windows, cable, USB port and windows can also be at fault here.
GDReaper said:
That's a Sprint device, so your bootloader is unlocked.
Here's something you should note: If you want to flash a ROM, of any kind, you don't necessarily have to be rooted.
Stock ROMs require Odin and custom ROMs require a custom recovery. None of them require root.
Your flash to an older version fails most probably due to the fact that you're trying to downgrade the bootloader (Any stock ROM flash also modifies the bootloader and modem partitions).
But your windows, cable, USB port and windows can also be at fault here.
Click to expand...
Click to collapse
For some reason I kept reading that it was locked or thinking it was locked because of not being able to downgrade.
So that's what I thought and I guess that's what I was trying to get at in my first post. Trying to go from Lollipop 5 to Jelly Bean 4.3 or so. Is it possible to do that whether it's custom or not?
I just hate the Lollipop and the KitKat. My Galaxy S2 had the JB and Power Button took a crap. So I ended up getting a S3 and now been sitting on an S4.
I know it's not the cable or at least it shouldn't be because it works to flash the stock current rom everytime I corrupt it. The computer is like brand new and running Windows 8.1
BikerSk8rKid said:
For some reason I kept reading that it was locked or thinking it was locked because of not being able to downgrade.
So that's what I thought and I guess that's what I was trying to get at in my first post. Trying to go from Lollipop 5 to Jelly Bean 4.3 or so. Is it possible to do that whether it's custom or not?
I just hate the Lollipop and the KitKat. My Galaxy S2 had the JB and Power Button took a crap. So I ended up getting a S3 and now been sitting on an S4.
I know it's not the cable or at least it shouldn't be because it works to flash the stock current rom everytime I corrupt it. The computer is like brand new and running Windows 8.1
Click to expand...
Click to collapse
Downgrading sometimes succeeds. There are also guides on how to downgrade, though there aren't any special procedures. Maybe the bootloader version of the firmware-to-be-flashed matters.
With custom ROMs it's definitely possible, as they do not change the bootloader.
GDReaper said:
Downgrading sometimes succeeds. There are also guides on how to downgrade, though there aren't any special procedures. Maybe the bootloader version of the firmware-to-be-flashed matters.
With custom ROMs it's definitely possible, as they do not change the bootloader.
Click to expand...
Click to collapse
I guess I'm more of a newb with this than I expected. :/ It's been years since I've been on the forums or even tinkered with phones. HTC Touch Pro 2 was the last one I believe. haha
So... With that being said. Custom Roms are typically to the current stock rom, correct? or is it possible to get a Custom Jelly Bean and flash/overwrite it to the Lollipop/current? Since I just tripped wit the Knox Warranty with the CF-AutoRoot. LoL
BikerSk8rKid said:
I guess I'm more of a newb with this than I expected. :/ It's been years since I've been on the forums or even tinkered with phones. HTC Touch Pro 2 was the last one I believe. haha
So... With that being said. Custom Roms are typically to the current stock rom, correct? or is it possible to get a Custom Jelly Bean and flash/overwrite it to the Lollipop/current? Since I just tripped wit the Knox Warranty with the CF-AutoRoot. LoL
Click to expand...
Click to collapse
If you can find some viable download links, then yes, you should be able to flash custom jelly bean ROMs. But you need a custom recovery in order to do that.
The recovery can be flashed with Odin. Or, since you're rooted, you can also flash a recovery by using an app called Flashify.
Odin requires a .tar file and Flashify requires a .img file.
Oh, and you also need the gapps package for the Google Apps. You need a package for that specific android version, so it should be jelly bean gapps.
GDReaper said:
If you can find some viable download links, then yes, you should be able to flash custom jelly bean ROMs. But you need a custom recovery in order to do that.
The recovery can be flashed with Odin. Or, since you're rooted, you can also flash a recovery by using an app called Flashify.
Odin requires a .tar file and Flashify requires a .img file.
Oh, and you also need the gapps package for the Google Apps. You need a package for that specific android version, so it should be jelly bean gapps.
Click to expand...
Click to collapse
I'll look into that and give it a shot. Thank you! I knew it wasn't THAT easy. LOL