Database Users

Need enlightening about the version of my note

Hi all!
I bought my Gnote online i sweden and the version of my phone is says this:
PDA:KKA / PHONE: KK5 / CSC: KK5 (AUT)
My question is what is (AUT)
And do I have the latest version?
Thank you
Best regards /equalness
Sent from my GT-N7000 using Tapatalk

Your phone is from austria (aut)
KKA is not the latest firmware but
it's the latest the phone comes shipped with.

There are two ROMs for Austria:
GT-N7000ZBAATO - N7000XXKKA/N7000OXXKK5/N7000XXKK5/N7000XXKKA 12/11/2011
GT-N7000ZBADRE - N7000XXLA4/N7000DREKL1/N7000NELA1/N7000XXLA4 16/01/2012
LA4 is the latest leaked for the moment.

Thanks now I known, but is it possible to change it to the Nordic version and get updates with kies / on the air?
Best regards and thank you for the info!
Sent from my GT-N7000 using Tapatalk

Switch to Nordic countries version
I think you can flash this FW to switch to Nordic countries version (you have to root ur phone first and use CWM Recovery to do flashing). Remember to Backup data!
http://www.hotfile.com/dl/137300051/62531bc/N7000XBKK4_N7000OXXKK5_NEE.zip.html
It's stock rom listed on http://www.samfirmware.com and for that, you can update OTA by Kies.

Thank you! Just another question before I flash.: do you think its necessary for me to flash to the Nordic version, or I can stay with this one?
Thanks in advance
Best regards /Adil
Sent from my GT-N7000 using Tapatalk

equalness said:
Thank you! Just another question before I flash.: do you think its necessary for me to flash to the Nordic version, or I can stay with this one?
Thanks in advance
Best regards /Adil
Sent from my GT-N7000 using Tapatalk
Click to expand...
Click to collapse
Only in case you have to do special things directly with Nordic language. Otherwise, no need to do so if your device is working smoothly. Plus, UK/English versions trend to be updated very soon, if not the soonest.
It's my private opinion.

N8010XXALH2 Firmware

Hi,
I have been waiting for a new firmware for the WiFi version of Note and one was released yesterday.
You can grab it from here - http://samsung-updates.com/device/?id=GT-N8010
Cheers

I'm running the N8013 so I'm guessing that wouldnt be for me. Is there actually anything new in it or just the release firmware?
Sent from my awesome Note 10.1

Superb stuff, will give it a go ASAP.
Thanks
Dc
Sent from my GT-I9300 using Tapatalk 2

Was one released for American wifi version?

Sorry I only found something for the N8010. Isn't the N8013 the same as the European WiFi version anyway?
I flashed N8000 software on my N8010 and it was fine.

limestar said:
Sorry I only found something for the N8010. Isn't the N8013 the same as the European WiFi version anyway?
I flashed N8000 software on my N8010 and it was fine.
Click to expand...
Click to collapse
ill check the Ota option in settings when I get off. does samsung post the drivers/tools needed for manual flashing of firmware?

Guys where can I find the description and differences N8010, N8013, N8000 please?
Is Note 10.1 3G+WiFi 16GB called N8000?

Interestingly I just fired up kies and the update isn't showing.
Still showing :
PDA: LGC
CSC:LG7 (BTU)
On closer look its a BTU region / Germany update.
I've downloaded both files, and one is a kernel, and but what is the other - its a really small file.
Dc
Sent from my GT-N8010 using Tapatalk 2

Here is the Kernel
DC

limestar said:
Hi,
I have been waiting for a new firmware for the WiFi version of Note and one was released yesterday.
You can grab it from here - http://samsung-updates.com/device/?id=GT-N8010
Cheers
Click to expand...
Click to collapse
Great page! Only change the numbers for your version
Gesendet von meinem GT-N8000 mit Tapatalk 2

[UK] Which stock firmware should I use on my P5110?

I have had CyanogenMod 10.x on my P5110 for a month or so now and I miss Samsung's stock firmware.
According to SamMobile, the latest firmware for "United Kingdom - BTU" is XXCLK7 (4.1.1, dated November 2012). This seems old.
4.1.2 is available when you do not choose "United Kingdom - BTU", but is it wise for me to choose non-UK firmware? Will it be in a foreign language etc.? Are there any specific ones to use if I'm based in the UK or speak English?

You can use anyone but i´ll advice you to use the latest one from Holland (PHN) from here http://samsung-updates.com/device/?id=GT-P5110
King Mustard said:
I have had CyanogenMod 10.x on my P5110 for a month or so now and I miss Samsung's stock firmware.
According to SamMobile, the latest firmware for "United Kingdom - BTU" is XXCLK7 (4.1.1, dated November 2012). This seems old.
4.1.2 is available when you do not choose "United Kingdom - BTU", but is it wise for me to choose non-UK firmware? Will it be in a foreign language etc.? Are there any specific ones to use if I'm based in the UK or speak English?
Click to expand...
Click to collapse

CM is my pick for it. But you can try using skin jelly beach.
Sent from my GT-I9505G using xda premium

jamesclinton said:
You can use anyone but i´ll advice you to use the latest one from Holland (PHN) from here http://samsung-updates.com/device/?id=GT-P5110
Click to expand...
Click to collapse
Why the latest Holland ROM specifically?
Also, is that ROM in the English language?

King Mustard said:
Why the latest Holland ROM specifically?
Also, is that ROM in the English language?
Click to expand...
Click to collapse
Because it is the newest European ROM and yes it is in English. I am using it myself with no issues. Don't forget that 4.2.2 is on its way very soon
Sent from my GT-I9300 using Tapatalk 4

Painman1963 said:
Because it is the newest European ROM and yes it is in English. I am using it myself with no issues. Don't forget that 4.2.2 is on its way very soon
Sent from my GT-I9300 using Tapatalk 4
Click to expand...
Click to collapse
Even though Android 4.3 is out? Shame. 4.2.2 came out in February :/
When will stock 4.2.2 be out for the P5110? I know it's out for the Tab 2 7.0 (P3100).

King Mustard said:
Even though Android 4.3 is out? Shame. 4.2.2 came out in February :/
When will stock 4.2.2 be out for the P5110? I know it's out for the Tab 2 7.0 (P3100).
Click to expand...
Click to collapse
It should be part of the same rollout.
Sent from my GT-I9300 using Tapatalk 4

[ROM][N5110] N5110XXDNE1 / 4.4.2 KitKat / UK / May 2014

Model: GT-N5110
Country: United Kingdom
Version: Android 4.4.2
Changelist: 1321607
Build date: 01.05.2014
Product Code: BTU
PDA: N5110XXDNE1
CSC: N5110OXADNE1
MODEM: N5110XXDNE1
Update should include all KitKat features and changes seen on other Samsung devices. Therefore, we should have a better performance, the status bar with white icons, longer battery life, music on the lock screen in full screen mode, support for wireless printing, realistic mode, etc..
DOWNLOAD
Mirror in MEGA - thanks for @entelekia

radekklamzynski7 said:
Model: GT-N5110
Country: United Kingdom
Version: Android 4.4.2
Changelist: 1321607
Build date: 01.05.2014
Product Code: BTU
PDA: N5110XXDNE1
CSC: N5110OXADNE1
MODEM: N5110XXDNE1
Update should include all KitKat features and changes seen on other Samsung devices. Therefore, we should have a better performance, the status bar with white icons, longer battery life, music on the lock screen in full screen mode, support for wireless printing, realistic mode, etc..
DOWNLOAD
Click to expand...
Click to collapse
Thanks! Finally!

Someone tried to root this by CF Auto Root?
Any other ideas?

Thank you been waiting forever, its a great help to have all on same OS version.

CWM AutoRoot seems to work, but be aware of KNOX flag... and if you update to 4.4.2, with new bootloader, you will not be able to downgrade to 4.2.2 again (in a stock way).
Mirror in Mega:
https://mega.co.nz/#!RV0wVQLL!CkqIRBGry5SeczTMVEtcWVXSCPLCmbEbo4uqI1ZLEWI
Regards.

Zaybatzu said:
Someone tried to root this by CF Auto Root?
Any other ideas?
Click to expand...
Click to collapse
Use the cf-auto-root... after reboot go to play store and update the supersu. Disable knox when you got the message from supersu.

entelekia said:
CWM AutoRoot seems to work, but be aware of KNOX flag... and if you update to 4.4.2, with the new bootloader, you will not be able to downgrade to 4.2.2 again (in a stock way).
Mirror in Mega:
https://mega.co.nz/#!RV0wVQLL!CkqIRBGry5SeczTMVEtcWVXSCPLCmbEbo4uqI1ZLEWI
Regards.
Click to expand...
Click to collapse
Thanks ... I can add to OP ?

radekklamzynski7 said:
Thanks ... I can add to OP ?
Click to expand...
Click to collapse
Yes, of course.
Thnx.

so..there is knox varranty void ?

simo.scorpion said:
so..there is knox varranty void ?
Click to expand...
Click to collapse
Yes, the flag is triggered (based on comments from N5100 3G partners).

simo.scorpion said:
so..there is knox varranty void ?
Click to expand...
Click to collapse
yup... if you go to download mode... there will be a knox count line there.

Same old snote or does it update to the new version? Can anyone get screenshots? Are there any noticeable changes in it?

Can I use this on an Australian GT-N5110?
Sent from my SM-N9005 using Tapatalk

citadel.lewis said:
Can I use this on an Australian GT-N5110?
Click to expand...
Click to collapse
Odined just fine on my US model

Jay Evans said:
Odined just fine on my US model
Click to expand...
Click to collapse
hi, did you notice any issue with the alignement of the Spen? like it was upgrading from 4.1.2 to 4.2.2 ?

Jay Evans said:
Odined just fine on my US model
Click to expand...
Click to collapse
Hi, can you let me know what steps you followed for installing this on the US model? Did it wipe your data? Many thanks.

mame3876 said:
hi, did you notice any issue with the alignement of the Spen? like it was upgrading from 4.1.2 to 4.2.2 ?
Click to expand...
Click to collapse
Seems fine to me but then again I'm haven't been a big user of the pen.

Jay Evans said:
Seems fine to me but then again I'm haven't been a big user of the pen.
Click to expand...
Click to collapse
ok thanks, if interested you`ll notice it if using the spen on anote with klines, thepointer does`t exactly overwrite the line but maybe ``decentered`` of 1-2mm

Evilweasel47 said:
Hi, can you let me know what steps you followed for installing this on the US model? Did it wipe your data? Many thanks.
Click to expand...
Click to collapse
Just download the zip file, unzip, Open Odin 3.09, Select the file in the AP slot in Odin, and go.
When it finished, everything was still there and it's just fine sofar. Everything looks like it does in the 5100 version.

Before I saw this thread... There are a bunch of peeps installing this firmware and are falsely reporting improvements.
Please be advised, that the comments given by the OP are hearsay and are not fact.
At this time 4.2.2 Stock firmware with Xposed 2.6 and proper setups is about the same speed wise as 4.4.2.
As for battery... 4.4.2 won't beat 8 hours with streaming video, and if any small improvement will probably be with apps hibernation. Wireless printing works on all Androids, and full screen as well. SD card is best served by 4.2.2, though some improvements are being made to allow such function with 4.4.2.
4.4.2 is too buggy with apps and what not for me to be happy with such an upgrade. Gosh, it took 4 months since owning my 4110 and 4100 to get apps that function well with 4.2.2. I can imagine another year or so for 4.4.2.
You can root 4.4.2 without KNOX flag... though many are too misled about how to root, and are using old root tools, not the latest and greatest.
Just hate to see someone blindly move to 4.4.2 without really understanding pros and cons. Seems like peeps are wanting what others have on newer devices. There is a reason Windows XP users scoff at upgrading. Not that I am pro 4.2.2, just find it more useful to my expectations than the upgrade, one being SD card compatibility... over 7,000 MP3 songs and video, with mapped system folders to SD.

[SM-G920F] S6 Firmware Thread

Hi, Let's start
All of them are stock roms for SM-G920F. Please help me to upload stock roms. Just upload your file storage space (MEGA, Google Drive, etc.) and share here. I will update 2nd post.
You can flash stock roms via Odin.
I thank you all.

Model SM-G920F
Model name GALAXY S6
Country France
Version Android 5.0.2
Changelist 4497415
Build date Thu, 09 Apr 2015 05:45:19 +0000
Product code XEF
PDA G920FXXU1AOD9
CSC G920FOXA1AOD9
Google Drive
----------------------------------
Model SM-G920F
Model name GALAXY S6
Country Germany
Version Android 5.0.2
Changelist 4497415
Build date Sat, 28 Mar 2015 10:51:21 +0000
Product code DBT
PDA G920FXXU1AOCV
CSC G920FDBT1AOCN
MEGA

This is the updated FW, right? Were you able to root it?

levikus said:
This is the updated FW, right? Were you able to root it?
Click to expand...
Click to collapse
No we have to wait until chainfire updates it.

CSC: XEF (FRANCE)
The update came through this morning.

perikach said:
CSC: XEF (FRANCE)
The update came through this morning.
Click to expand...
Click to collapse
Leave the link from Drive....
https://docs.google.com/file/d/0ByTCOFw_f5w4UkxIRThCejFoRk0/edit?usp=docslist_api
:thumbup:

Axel 11 said:
Leave the link from Drive....
https://docs.google.com/file/d/0ByTCOFw_f5w4UkxIRThCejFoRk0/edit?usp=docslist_api
:thumbup:
Click to expand...
Click to collapse
Added on 2nd post. Thank you.

If I buy the 920F, Is there anyway I can flash the T-Mobile Rom on there so I can use Wifi Calling? Thanks

gosh darnit!
every time i get my custom G920F rom ready for upload I find another version to base it on..........:silly:

echelonx said:
Hi, Let's start
All of them are stock roms for SM-G920F. Please help me to upload stock roms. Just upload your file storage space (MEGA, Google Drive, etc.) and share here. I will update 2nd post.
You can flash stock roms via Odin.
I thank you all.
Click to expand...
Click to collapse
Or you could just go to sammobile and get all of them there in one place.
http://www.sammobile.com/firmwares/database/SM-G920F/

nookcoloruser said:
Or you could just go to sammobile and get all of them there in one place.
http://www.sammobile.com/firmwares/database/SM-G920F/
Click to expand...
Click to collapse
And wait a week with their download speeds!
Sent from my SM-G920F using XDA Premium 4 mobile app

Some link for 5.1.1 BTU?
Enviado de meu SM-G920F usando Tapatalk

http://http://www.sammobile.com/firmwares/database/SM-G920F/

Just my curiosity. I'm getting SM-G920S 64GB soon later this week. Can I flash SM-920S with SM-920F stock firmware?
Kind of away from Samsung devices since GS4.
I am living outside South Korea and I don't need those bloat on my phone.

can i please know that, can i flash g920az with g920f official rom. im using a g920az

rdioz said:
Just my curiosity. I'm getting SM-G920S 64GB soon later this week. Can I flash SM-920S with SM-920F stock firmware?
Kind of away from Samsung devices since GS4.
I am living outside South Korea and I don't need those bloat on my phone.
Click to expand...
Click to collapse
Make a FULL TWRP backup, and try for yourself. You may get away with it.
I'm currently using a 920FD (Dual Sim), and have a 920F ROM, Kernel, Bootloader and Modem... And everything is working fine.
Just... Backup...

g.lewarne said:
gosh darnit!
every time i get my custom G920F rom ready for upload I find another version to base it on..........:silly:
Click to expand...
Click to collapse
I have a custom Rom i Would like to know if there is a way to update my firmware without loosing my root and custom Rom! Im using SM-G920F! !!

torchec said:
I have a custom Rom i Would like to know if there is a way to update my firmware without loosing my root and custom Rom! Im using SM-G920F! !!
Click to expand...
Click to collapse
Flashing a firmware will make you lose root and will wipe your phone so you will lose custom rom.

ashabry12 said:
can i please know that, can i flash g920az with g920f official rom. im using a g920az
Click to expand...
Click to collapse
If you flash diff model no firmware there is no guarantee will It work or not.
So just back up and try for yourself.

torchec said:
I have a custom Rom i Would like to know if there is a way to update my firmware without loosing my root and custom Rom! Im using SM-G920F! !!
Click to expand...
Click to collapse
You need to get a new version if your custom ROM. That's the only and easy way to update.