Hi,
on my HTC TD I can choose with the touchflo 3d the sound profile settings. When I choose for example the "Normal" profile, the ringtone loudness goes on 80%.
Is it possible to change the default loudness of the "Normal" profile to example 90%?
Thanks for your help!
Best regards,
Double-You
Dear all,
I'm currently enjoying the SRS WOW plugin which an be found here:
http://forum.xda-developers.com/showpost.php?p=2291468&postcount=81
However, after each soft-reset, my settings go back to default. I checked tru the registry settings and these seem to be associated with this plugin:
HKEY_LOCAL_MACHINE\SOFTWARE\SRS\WOWXT\BtA2dpSnd
HKEY_LOCAL_MACHINE\SOFTWARE\SRS\WOWXT\WaveDev
The thing is, the values do not change when I change my SRS settings. It seems disconnected. I was hoping to find working registry settings, so I can probably create a cab to run each time I soft-reset.. but like I mentioned, the registry keys seem disconnected.
Anyone else who uses it experiences the same problem?
I've been on a few 6.1 ROMs, from Duttys and now Shaks. Same issue.
Thanks for reading.
bump......
Create 2 new keys with a registry editor
1.InputGain=0
2.OutputGain=0
HKEY_LOCAL_MACHINE\SOFTWARE\SRS\WOWXT\BtA2dpSnd
HKEY_LOCAL_MACHINE\SOFTWARE\SRS\WOWXT\WaveDev
xenkato said:
Create 2 new keys with a registry editor
1.InputGain=0
2.OutputGain=0
HKEY_LOCAL_MACHINE\SOFTWARE\SRS\WOWXT\BtA2dpSnd
HKEY_LOCAL_MACHINE\SOFTWARE\SRS\WOWXT\WaveDev
Click to expand...
Click to collapse
Thanks for the reply, but it doesn't seem to work.
I added the 2 keys you mentioned into the 2 paths (total 4 keys) and they seem to be disconnected with the SRS control panel.
The thing is, I usually set the Input Gain and Output Gain to max (rest is default), but sadly these are the 2 settings which go back to default after a soft reset.
Wait a min.. Although I notice the regisry keys dont get updated each time i edit the gain settings.. it does remain at max settings after reset! (that is if the registry keys are set to zero)
Thanks again!!
Can someone please explain exactly what to do, for my settings to keep the same after Soft Reset ...
I tried changing those values to 0, but the problem is really that the setting are always at maximum after soft reset, they don`t stay as a previously configured them.
Someone found the solution to this already ?
Thank you in advanced !!!
Bump
Well for me, the maximum settings for TruBass is what I want, so I'm ok with it. I'm not sure if it stays in other settings.
Here are my personal settings (headphones):
3D Effect: 100%
Center Effect: 40%
Focus level: 0%
Definition level: 0%
TruBass level: 40%
Speaker size: 100Hz (40Hz for internal)
Input gain: 0dB
Output gain: 0db
I can confirm that these settings do stay that way after soft-reset.
The Headphone/Internal setting doesn't matter as that's the mode selection, meaning the headphone setting will be used when you plug-in your headphones.
I have created a cab that incorporates the extra registry settings and all for convenience. You might wanna try it and see if it helps:
Thank you for all your help ! It works perfect now !
Hi guys ...
I want to change a setting voice in a ROM (based on DESIRE HD) or remove it completely. How I can do? I want to remove this setting "G-Sensor Calibration" (in Display Settings) or make it launches another program.
Thank you very much
help please..
Galaxy S2 "Increase the microphone for incoming calls and outgoing" (excuse me for the translation but i m italian).
settings:
Enter the numeric keypad of the phone the following command: * # * # 197328640 #*#*, A screen with the following items:
Service Mode
Click on the item
[5], then click AUDIO
[1] NB (Voice Call)
[3] and then on SPEAKER VOLUME
Enter the following values :
SPEAKER:
[1] SRC Speech RX Volume I put:
* Lvl 4: 95
* Lvl 5: 100
[4] DST TX Speech Volume I put: 98
TO ENTER THE VALUES ON PLUG VOICE YOU WANT CHANGE, BY CLICKING THE SOFT LEFT THAT IS ON THE DISPLAY AND THEN CLICK ON KEY INPUT.
AFTER ENTERING VALUES, RETURN BACK MORE 'TIMES TO RETURN TO THE VOICE HANDSET!
THE SAME APPLIES ARE FOR HANDSET AND HEADSET!
HANDSET:
[1] SRC Speech RX Volume I put:
Lvl 4: 90
Lvl 5: 100
HEADSET:
[1] SRC Speech RX Volume I put:
Lvl 4: 90
Lvl 5: 100
CLICK ON SOFT LEFT BUTTON THAT IS ON THE PHYSICAL AND PRESS "AND".
IN THIS WAY WE HAVE SAVED PERMANENTLY SETTING THE AUDIO CALL!
With these settings will have an increased audio for incoming calls and outgoing!
The values could increase beyond those I mentioned but it could distort the audio!
Make a test x to see your opinion what are the best settings if you want!
Note: each time you reboot the terminal the following settings are lost!
Find a way to save these settings in your rom and keep them permanently without losing on every reboot.
I have been searching for a solution to these settings being reset after boot for awhile now. Has anyone got a clue as to where these settings are modded? I think that the servicemode.apk saves the settings in a file somewhere???
Maybe values in?
/data/soundbooster.txt
/data/stream_earpeiece.txt
/data/stream_headset.txt
/data/stream_bluetooth.txt
Anywho, I hope someone knows how to make these setting changes permanent.
Thanks, I will test these out.
good. Im doing know
Now it would be cool if someone was able to put this into a simple app so that settings can be changed from a UI (perhaps with presets such as 'High', 'Medium', 'Low').
amuneer said:
Now it would be cool if someone was able to put this into a simple app so that settings can be changed from a UI (perhaps with presets such as 'High', 'Medium', 'Low').
Click to expand...
Click to collapse
that really sound great i wish for this also
Thanks.....
Looking forward to a permanent solution for this
Gonna try these settings out. Thanks!
thank you fosseperme,
this is great info and i also agree that somebody should do apk for this (i wish i could )
It would be great to have this fix implemented automatically maybe a small app or some sort of auto execute script on boot?
this increase the volume you hear or the volume the other party hear?
Isnt Tx responsible for transmit and Rx for receive, in this case only heard volume is louder on our end right?
Can anyone else confirm and test if this is working ?
Non e stato risolto il problema del riavvio?
Inviato da Galaxy S II from Italy
Still no fix. For onlookers - save your time and money, just buy a phone that isn't buggy in such a critical area. This problem plagues all sgs2 users.
Madmax what problem it plaques you doesn't mean it does everyone. My sgs2 is plenty loud enough.
Sent from my GT-I9100 using xda premium
what problem it plaques you doesn't mean it does everyone. My sgs2 is plenty loud enough
Click to expand...
Click to collapse
yes , But ... there are many situations and places where we all can use a little boost in volume , especially outdoors where public activity is loud .
i'm another voter for an app for this
On my XWKI4 stock no brand tapping menu (5)audio it says : CAUTION!! Menu being blocked.....why?
Please help me
saso75 said:
On my XWKI4 stock no brand tapping menu (5)audio it says : CAUTION!! Menu being blocked.....why?
Please help me
Click to expand...
Click to collapse
Come on everyone. I am having the same problem. Surely someone knows how to get around this problem.
Where can i enter this code? (I am using a Huawei Y625)
hi brothers
how to increase volume loadspeaker to maximum ?
i found a solution for j700h by changing mixer_path in system/etc with another mixer_path
can i use it in my grand2? or a solution?
i use motion rom 16.6
thx
I adjust mixer_path.xml by change value of speaker to 95.
powerp said:
I adjust mixer_path.xml by change value of speaker to 95.
Click to expand...
Click to collapse
can u tell me exactly where should i change value
coz there is RXr digital volume
SPK DRV volume
compo switch
if u can with screen shot
thx