Related
Okay, I was able to get into pink screen by erasing the dload folder, removing the battery, and connecting to my PC via the USB cable. I then copied CWM 5.0.2.7 over and then flashed Stallion-51-ICS onto the phone. I now have a very fast, rooted and customized U8800-51, BUT no mobile service. IMEI and APN info is correct but it won't access the mobile service that our other phones access, SIM is the same one that I use in my current phone.
I know you are supposed to back up the IMEI partition and APN before flashing a custom ROM, but since my phone got broke trying to restore a full backup done with CWM I was caught off guard.
Still looking for any suggestions you all might have.
Seriously???
pastorbob62 said:
Okay, I was able to get into pink screen by erasing the dload folder, removing the battery, and connecting to my PC via the USB cable. I then copied CWM 5.0.2.7 over and then flashed Stallion-51-ICS onto the phone. I now have a very fast, rooted and customized U8800-51, BUT no mobile service. IMEI and APN info is correct but it won't access the mobile service that our other phones access, SIM is the same one that I use in my current phone.
I know you are supposed to back up the IMEI partition and APN before flashing a custom ROM, but since my phone got broke trying to restore a full backup done with CWM I was caught off guard.
Still looking for any suggestions you all might have.
Click to expand...
Click to collapse
Not to be negative or anything but I think this is the least responsive forum on this site. I have spent hours searching for possible solutions to various problems I've encountered over the past several months, asked several questions and received little if any help. I was only able to get back from a bricked phone to where I am now by using information found on other websites. Pretty sad if you ask me.
In contrast, whenever I have asked a question on my tablet's forum I've received fast workable solutions/answers to my problems/queries. The threads are informative, well organized and contain answers to any situation I have encountered.
Granted, my current problem with my phone is my own fault for trying to customize it. And I suspect part of the problem is due to the age of this phone thus most of the "experts" have moved on to other ventures. It is also hindered by the lack of information available from Huawei and the service providers.
All of that said, if anybody has any suggestions for how I can repair the ESF partition or whatever is causing this lack of mobile service issue I would be extremely grateful. It isn't the end of the world since i have a new phone (Consumer Cellular) that I am currently using but it would be great to get this one working since it's much faster and more streamlined than my stock Consumer Cellular version.
I have experienced something similar on my regular U8800, and it seemed like there was a baseband & modem partitions conflict. In stock 2.3, there should be some kind of hwefsupdate tool, it may be renamed though. This tool gets run on the first boot after 2.3 and it restarts the phone shortly after. Try to reinstall the stock ROM, see what happens. It can be fixed in strange ways - for example, my original U8800 got a USB failure, so I sent it to the repair. I had 2.3 installed. When I got it back, they tried to write over some old 2.2 firmware, which softbricked the phone. Being clueless, I wrote the 4GB image of some other phone's image on my phone, and got everything working again. Then, when I tried to write back my original IMEI, I got the same issue as you. The only way to get it right was to rewrite the "other phone's imei".
The baseband/modem errors are actually very hard to debug, hence no replies. And since it's a Huawei, these guys have even failed to provide a good update system, as seen from the IMEI getting nulled issues. The mmcblk0p5 stores the OEMInfo of the phone, it contains serial numbers & other information about the phone (like accelerometer position up/down for example). It also has the boot image (the very first splash screen). The data is loaded onto modem processor, which provides an API to let userspace access it.
Blefish said:
I have experienced something similar on my regular U8800, and it seemed like there was a baseband & modem partitions conflict. In stock 2.3, there should be some kind of hwefsupdate tool, it may be renamed though. This tool gets run on the first boot after 2.3 and it restarts the phone shortly after. Try to reinstall the stock ROM, see what happens. It can be fixed in strange ways - for example, my original U8800 got a USB failure, so I sent it to the repair. I had 2.3 installed. When I got it back, they tried to write over some old 2.2 firmware, which softbricked the phone. Being clueless, I wrote the 4GB image of some other phone's image on my phone, and got everything working again. Then, when I tried to write back my original IMEI, I got the same issue as you. The only way to get it right was to rewrite the "other phone's imei".
The baseband/modem errors are actually very hard to debug, hence no replies. And since it's a Huawei, these guys have even failed to provide a good update system, as seen from the IMEI getting nulled issues. The mmcblk0p5 stores the OEMInfo of the phone, it contains serial numbers & other information about the phone (like accelerometer position up/down for example). It also has the boot image (the very first splash screen). The data is loaded onto modem processor, which provides an API to let userspace access it.
Click to expand...
Click to collapse
Thank you very much for your reply. It seems that you have found the answer to my problem. But unfortunately, I don't have a copy of the original stock ROM. My phone is the -51 version and any links I have found to the stock ROM are broken. There is a version I found but it is for Venezuela and I don't think it will work. I am leery to try it and totally brick my phone. My backup is apparently corrupted. I backed up my new working phone with Disk Image and attempted to restore it to the broken phone but all that did was cause it to come up to the ATT logo screen for a few seconds and then shut down. It wouldn't do anymore than that. So I restored the Stallion 3.5 image I made and am back to a great fast tablet with no phone service. I also tried backing up my IMEI on the working phone and restoring it to the broken phone but that had no effect.
It is my understanding that the -Pro version of the ROM will work, but I don't have the stock image of that either. I suspect it work might since I was able to use the -Pro version of GB on it. All of my internet searches have only turned up custom ROMs and other desperate people looking for fixes for similar problems or worse. I agree 100% with your assessment of Huawei's lack of meaningful support. It really is a shame, because these phones aren't half bad when they have been customized and OC'ed a little.
I have just about given up on it and resigned myself to using it as an MP3 player for my car system. I have learned my lesson and am leaving the working phone stock. It is rooted and I have cleaned off all of the bloatware, and set it up so most apps run from my SD card, so it really isn't half bad. At least it works.
Again, thank you for your reply and advice.
Blefish said:
I have experienced something similar on my regular U8800, and it seemed like there was a baseband & modem partitions conflict. In stock 2.3, there should be some kind of hwefsupdate tool, it may be renamed though. This tool gets run on the first boot after 2.3 and it restarts the phone shortly after. Try to reinstall the stock ROM, see what happens. It can be fixed in strange ways - for example, my original U8800 got a USB failure, so I sent it to the repair. I had 2.3 installed. When I got it back, they tried to write over some old 2.2 firmware, which softbricked the phone. Being clueless, I wrote the 4GB image of some other phone's image on my phone, and got everything working again. Then, when I tried to write back my original IMEI, I got the same issue as you. The only way to get it right was to rewrite the "other phone's imei".
The baseband/modem errors are actually very hard to debug, hence no replies. And since it's a Huawei, these guys have even failed to provide a good update system, as seen from the IMEI getting nulled issues. The mmcblk0p5 stores the OEMInfo of the phone, it contains serial numbers & other information about the phone (like accelerometer position up/down for example). It also has the boot image (the very first splash screen). The data is loaded onto modem processor, which provides an API to let userspace access it.
Click to expand...
Click to collapse
@Blefish
hi there, can you please give me the exact steps do to so, because im experience the exact same problem.
I've lost the imei in the upgrade process, and them flashed the 4GB image from a user, and then when i try to update to gingerbread, i can't have 3G signal, only 2G.
in the past, i had made a backup of the imei after flashing that .img file, and i think that after update to gingerbread had restored the imei and the 3g was working nice. But this time i cannot acomplish the same, don't remember very well the exact steps that i've made.
I already tried with the B517 and B518, and can't get it to work...
Can you give me some help please?
Thanks in advance
ggunzio said:
@Blefish
hi there, can you please give me the exact steps do to so, because im experience the exact same problem.
I've lost the imei in the upgrade process, and them flashed the 4GB image from a user, and then when i try to update to gingerbread, i can't have 3G signal, only 2G.
in the past, i had made a backup of the imei after flashing that .img file, and i think that after update to gingerbread had restored the imei and the 3g was working nice. But this time i cannot acomplish the same, don't remember very well the exact steps that i've made.
I already tried with the B517 and B518, and can't get it to work...
Can you give me some help please?
Thanks in advance
Click to expand...
Click to collapse
In my case, I restored the full 4GB from some russian community's provided image (it was named Huawei_U8800_FullFlash.bin), which returned my device to stock 2.2. From there I installed 2.3, and everything still worked. The problem in my case was that I could not restore my own IMEI, it never gave me connection & failed to register to a network. The only solution was to use the "wrong" IMEI that came with the 4GB image.
Huawei has some sort of backup mechanism if they think the "data" is corrupted. I can't tell how it works, but it likes to break things that were working before.
Blefish said:
In my case, I restored the full 4GB from some russian community's provided image (it was named Huawei_U8800_FullFlash.bin), which returned my device to stock 2.2. From there I installed 2.3, and everything still worked. The problem in my case was that I could not restore my own IMEI, it never gave me connection & failed to register to a network. The only solution was to use the "wrong" IMEI that came with the 4GB image.
Huawei has some sort of backup mechanism if they think the "data" is corrupted. I can't tell how it works, but it likes to break things that were working before.
Click to expand...
Click to collapse
i have exactly the same phone than you, because i installed that backup too. After installed it, the IMEI SV is 36, after installing B518 it says it is 18, but before it was 17, and i had 3g signal, but not now.
My question is, wich SV is your phone reporting?
Thank you
I also have a problem like this, but I think it's a bit more severe. My phone got stuck while charging. Couldn't reboot. Was getting stuck on the aurora loading screen(using DZO 5u20). Than reinstalled whole rom. But now I don't any signal and the phone doesn't even see a SIM card. Showing 'baseband unknown' and the IMEI and IMEI SV are also unknown. Not 0's but just unknown. Is this is a similar problem? And can something be done to fix it.
I had some backups on my sd card, untill the sd-card got fried in the phone a couple of months ago.
Alright so... I got this N900T and rooted it and tripped the knox warrenty bit.
I installed the latest DomPop and read how the efs partrition had some issues and it being easily borked, and well I didn't wanna risk it. Rather than look into how to back it up properly using better tools, I had remembered a command from the S3, su reboot nvbackup, which is supposed to back up the efs stuff to a safe place on the phone. However, upon finishing that command it bootlooped. Well, i then ODINed back to 5.0. my baseband version is unknown, IMEI is unknown, all of the typical EFS is messed up stuff. So i tried, stupidly, the other command to restore the backup, su reboot nvrestore, and upon running that command it forced itself in download mode unable to boot.
i odined back to the 5.0 firmware about 4 more times and nothing happened.
I searched and searched and i tried following http://forum.xda-developers.com/showthread.php?t=2567133, i tried the the script it links to remake the partrition for the EFS.
My serial is still on the phone, i skipped down to the part about repairing the imei. I put my phone in RMNET+DM+MODEM, however it doesnt get picked up by EFS Professionals NV Tools. Any more ideas or help?
Also, is it safe to flash the 4.4 Kitkat without the phone bricking?
If there is anything i cannot do on my computer, are there services cheapish i can send them to and have them flash my IMEI back onto my phone?
Thanks in advance!
Me can not follow
Okay, so I used "reboot nv backup" without first researching to to back up my EFS partitions. Upon reading further into the stuff, I have found that that method destroys your partitions and shouldn't be used. I then, kind of freaking out used the other function "reboot nv restore" which is supposed to restore the backup, but instead it caused my phone to not be able to boot. So I odined back to stock 5.0. I have tried flashing just the modem, I have tried downgrading to NK3(4.4) but that had not helped me either. My baseband is still unknown and my IMEI is still null.
Is the only way to fix this with a UART cable and box? Are there any paid services I can use online to repair those partitions? I attempted to use EFS Professional, however it couldn't talk to my phone, either the SPC Code or the 16 digit security code wouldn't work so I couldn't write the IMEI back that way.
Ravenjolly said:
Alright so... I got this N900T and rooted it and tripped the knox warrenty bit.
http://forum.xda-developers.com/showthread.php?p=46436273
Not sure how is this going to help but there was a user (other than the poster) managed to recover his imei. I believe you could use any help at this moment.
Click to expand...
Click to collapse
Rosli59564 said:
http://forum.xda-developers.com/showthread.php?p=46436273
Not sure how is this going to help but there was a user (other than the poster) managed to recover his imei. I believe you could use any help at this moment.
Click to expand...
Click to collapse
Sorry, I have tried this and it didn't work. Thank you for looking for me.
Have seen many people with IMEI unknown and none of the threads I have read managed to get it back. As far as I know you are now hard bricked, at least regarding the actual phone part of your phone.
So, I'm having a particularly strange issue here. I recently got this Sprint Note 4 and activated it. However, there appears to be a missing option under settings. Tethering and Hotspot is straight up gone. To clarify, I have pictures attached showing the item listing, and one without it.
Clarifications of troubleshooting I've tried so far:
I have attempted a factory reset of the device
I have attempted to do a reset with ##72786#
I have tried updating Profile, PRL,
I am using a DeOdexed PH4 6.0.1 ROM. I have tried reflashing per instruction (triple wiping Cache, Dalvik, Internal, System, etc)
I have tried flashing a STOCK OTA PH4 ROM to see if it would show up there. It does not.
I called Sprint technical support to reprovision my phone. They pushed out a a reprovisioning that I accepted. No change.
At one point, Wanam/Xposed was attempted to be installed. I checked for system/csc/features.xml. It was not there
http://forum.xda-developers.com/note-4-sprint/development/rom-stock-ph4-bloated-deodexed-t3473610/ is the custom ROM i'm using. However, it doesn't seem like a ROM specific issue.
If I use Activity Launcher or itools, i can access the actual wifi hotspot MENU (the toggle off and on, LAN settings, etc). I can enable it and the system will broadcast the SSID. However, if I try connecting to it, no devices are able to successfully connect.
here is the Activity Launcher referenced, for other readers:
http://forum.xda-developers.com/showpost.php?p=66713935&postcount=7
but anyways, regarding devices not being able to connect, sometimes the data connectivity (through hotspot only, not for the entire phone) will go dead if you don't start using it immediately after first unlocking and activating tether.
in my experiences, if you keep data alive by immediately connecting a device after your first time turning tether on (after unlock) by downloading a large file or somewhat frequently reloading web pages (on the connected device!) -- anything that will keep data sending and receiving -- it will stick, and the data service to connected device issues will stop.
it's not foolproof, it's not a silver bullet, but this is the method to the madness I have learned and worked for me many times when changing roms and even getting new phones.
it's been a couple months since I had to fiddle with it last, so I can't remember if it was necessary to re-unlock after a failed attempt at keeping data alive. you might only have to toggle data off then back on for another attempt.
when I had the problem of connected devices losing internet access, it would only happen after having worked for a few seconds to a few minutes. it'd work then abruptly stop, and this is my "fix"
My issue seems more in line with the devuces failing to validate to begin with. Not losing connection.
I had something like this before, I vaguely recall it having to do with using Odin vs. OTA stock. So did you try wiping your phone completely then Odin the stock PH4 tar, or did you OTA to PH4?
beezar said:
I had something like this before, I vaguely recall it having to do with using Odin vs. OTA stock. So did you try wiping your phone completely then Odin the stock PH4 tar, or did you OTA to PH4?
Click to expand...
Click to collapse
The very very very first time, I OTA'd to PH4. The next two tries were wiping completely and using the PH4 tar file. So both methods have been attempted.
I was referring to loss of internet connection, not signal related. I thought that was clear, sorry
Sterist said:
I was referring to loss of internet connection, not signal related. I thought that was clear, sorry
Click to expand...
Click to collapse
I thought you meant loss of internet connection in the sense of anti-tether provisioning from Sprint. My phone's LTE never goes down (and I am able to still browse the internet from the mobile device while tethering).
The connected devices never successfully "connect". They aren't listed as connected devices under the mobile hotspot. My other Android phone (without mobile data) is forever connecting. My macbook claims it has an assigned IP but is "unable to access the internet". So I'm not sure what the hell is going on with that.
At this point, I have restored my Note 3 as my active device until I get this resolved. I'm willing to re-write everything down to the barest metal I can.
Somebody in another topic mentioned something about PIT. I don't know anything about that sort of thing. My knowledge extends about as far as installing recovery and flashing ROMs.
I'm confident I could follow procedure, but could use a guiding hand on where to go from here.
sounds like the tether unlock method you used was not done correctly, whether by whoever made it or yourself
method 2 in Galaxy Tools should work just fine. there are several threads in the Sprint note 4 seconds that contain the apk or ppl that will pm it to you. the author discontinued the public/free version of the app and now chargers $35+ per person for a 1 time use lol once you get a copy of the free one, make copies and store on multiple devices forever.
it's primarily for Sprint Sammy devices, so you prob won't see much if anything about it here in the collective note 4 forum.
may work on some boost or even tmo, but yeah.
edit:
you'll want either 3.1.5, easy install n msl read broken on MM and less features
or 3.1.8, troublesome install with msl read working but unreliably, more features.
Sterist said:
sounds like the tether unlock method you used was not done correctly, whether by whoever made it or yourself
method 2 in Galaxy Tools should work just fine. there are several threads in the Sprint note 4 seconds that contain the apk or ppl that will pm it to you. the author discontinued the public/free version of the app and now chargers $35+ per person for a 1 time use lol once you get a copy of the free one, make copies and store on multiple devices forever.
it's primarily for Sprint Sammy devices, so you prob won't see much if anything about it here in the collective note 4 forum.
may work on some boost or even tmo, but yeah.
edit:
you'll want either 3.1.5, easy install n msl read broken on MM and less features
or 3.1.8, troublesome install with msl read working but unreliably, more features.
Click to expand...
Click to collapse
Came back around to this, as I am running a multi-rom and am still encountering this issue. I never attempted any hotspot unlockers. The hotspot was missing from the get-go.
Gamemaster1379 said:
Came back around to this, as I am running a multi-rom and am still encountering this issue. I never attempted any hotspot unlockers. The hotspot was missing from the get-go.
Click to expand...
Click to collapse
Just a thought and question: when you Odin stock tar to recover from this condition, are you using the rooted extended power menu to boot to download mode? Or, do you prevent the auto reboot of stock tar flash with Odin options?
A noted developer, @idone from Galaxy Tool app, once shared with me that rooted shortcut or preventing auto reboot can prevent the normal flash of Odin booting to recovery momentarily to set csc options. csc options flashed may not restore on any boots if you skip that initial auto boot.
The suggested method is to power down and pull battery for 30 seconds our more before reinserting battery and manually booting to downloaded mode. And do not uncheck auto reboot or pull battery but use Odin defaults and let phone auto boot. Doing this allows the phone to boot into recovery to do its thing briefly before booting system. I usually just let it perform the setup wizard and didn't activation just in case.
I rarely do the the data profile update or PRL because if letting the phone setup this way and phone prompts to reboot later, I believe this all done. But since this may allow ItsOn to bootstrap initialize, after flashing TWRP and backing up, I wipe internal memory and factory reset before flashing a custom ROM. Data format is optional; I don't always do that.
But if you do all that and don't see hotspot in Settings of stock, that's a problem. Maybe from dead stock, try KIES or Smart Switch to restore latest stock and check again?
Sent from my SM-N920P using Tapatalk
The Story
Don't even know where to start. Okay so I have a SM-935W8 (Canadian Version) and it was working perfectly fine running Project Dream rom the S8 one. I decided to flash angelo's Pixel rom for S7 Edge and for some reason when it booted, the network had a cancel sign meaning no network. Once I finished the initial setup, calling, messaging , and data weren't working. Luckily I have a backup for EFS and RADIO in tar, img. and tar.gz formats. So I downloaded the Partitions Backup app and restored the EFS and Radio files, it said successfully restored. I rebooted my device and the issue was still there, no network. So then I installed the stock ROGERS (Provider) rom from SAM MOBILE and it came up with some DRK error and my phone would not boot. So then I quickly used ODIN to flash twrp and then flash Superman Rom (Love it) and use dm-verity bypass.zip to get past the drk error. Then I attempted many other things but to no avail such as flashing the EFS tar through ODIN which caused a "Software Error" and phone to be stuck on a light blue software error screen so I had to use smart switch to FULLY restore the phone back to booting up, then once again I flashed twrp and Superman rom with dm-verity so I atleast have root and a decent rom to work from.
The Problem and What I Have at Disposal
So essentially, I currently have a new section in settings under Connections called "SIM card manager" for managing sim cards even tho I only have 1 slot, it shows that the SIM is ROGERS and LTE/3G/2G in there, but it can't connect to a network and keeps saying Not Registered on a Network. Also, there are 2 IMEI's since my phone thinks theres 2 SIM slots but I really only have 1 slot. BUT HERE IS THE MAIN ISSUE, THE ROOT OF ALL PROBLEMS, the IMEI is reading as "000000000000000" and the IMEISV is "01". Hence im getting Not Registered on a Network. No secret codes such as *#06# are working, keeps giving the Not Registered on a Network error.
I have the EFS and RADIO backups in img, tar, and tar.gz formats as well as screenshots of all my MAC and Bluetooth addresses, IMEI and Serial #'s and all that information. So essentially I feel fully ready to solve the problem but everything I try keeps failing. My EFS restoration says successful in the APP but upon reboot, theres no change. Flashing the EFS through ODIN messes up phone harder. When I use EFS Professional Tool, where do I place the partitions so they show up in the tool?
I used this post to try to fix it: https://forum.xda-developers.com/s7-edge/how-to/guide-how-to-fix-check-drk-imei-issues-t3379516
BUT when I'm flashing the combination through ODIN in AP, it goes to NAND write or whatever and gets stuck, sometimes it gets stuck on Analyzing files or something. I tried every single ODIN version. I really could use some expertise on this issue. A step by step written tutorial, some method anything!!!! Help on this post or even teamviewer or skype for live help would be appreciated. Please help and I'm willing to compensate for successfully helping me fix my issue..
Did you ever sort this out? I'm in a similar situation, except that it does occasionally show my IMEI but also 'baseband unknown'. But still no network access.
i hope i dont risk a warning, but you can use xposed and with root you can change your imei and baseband info.
012345678 said:
i hope i dont risk a warning, but you can use xposed and with root you can change your imei and baseband info.
Click to expand...
Click to collapse
Thanks, I've done so much to this phone now...
I did try xposed and have tried a different IMEI, it seems like it's a modem issue but there doesn't seem to be a firmware solution - I have tried so many stock roms(All the way back to the first Marshmallow and a bunch in between) and different custom roms too but in the end the error is always there: Not registered to Network.
I saw somewhere in my troubleshooting that some kind of cert needs to be patched because the phone did an update on a modified rom without the OEM unlock being on and then the EFS data was messed up or something like that (all of the research and troubleshooting is starting to blur). It seems like that fix isn't doable without a rather expensive piece of hardware (expensive if your just fixing your one phone I guess) and there isn't any firmware-only fix that can accomplish this patch so I'm stuck again.
jamesroodney said:
Thanks, I've done so much to this phone now...
I did try xposed and have tried a different IMEI, it seems like it's a modem issue but there doesn't seem to be a firmware solution - I have tried so many stock roms(All the way back to the first Marshmallow and a bunch in between) and different custom roms too but in the end the error is always there: Not registered to Network.
I saw somewhere in my troubleshooting that some kind of cert needs to be patched because the phone did an update on a modified rom without the OEM unlock being on and then the EFS data was messed up or something like that (all of the research and troubleshooting is starting to blur). It seems like that fix isn't doable without a rather expensive piece of hardware (expensive if your just fixing your one phone I guess) and there isn't any firmware-only fix that can accomplish this patch so I'm stuck again.
Click to expand...
Click to collapse
i think i can help you out with that. install that with odin, it should get your efs and imei back:
Samsung S7 Edge Cert and Efs (SM-G935F)
https://drive.google.com/file/d/0B5829G4TER3CZmZYVU9PY21qT2c
012345678 said:
i think i can help you out with that. install that with odin, it should get your efs and imei back:
Samsung S7 Edge Cert and Efs (SM-G935F)
https://drive.google.com/file/d/0B5829G4TER3CZmZYVU9PY21qT2c
Click to expand...
Click to collapse
Sorry, I should have clarified. I have an S7 (SM-G930W8). I only tried this thread because the issue was identical to mine and I couldn't find anything similar referencing the S7 specifically.
For anyone coming across this thread in the future, although mine was an S7 I think the issue would apply to both. I ended up ordering a z3x in order to use the patch certificate. But it wasn't that easy; the firmware had to be downgraded to marshmallow first which wouldn't work in Odin until I tried just flashing the BL and CP files first, then rebooting and flashing the AP and CSC files separately. In fact, the AP file froze the first time but passed on the second attempt. After that, everything was downgraded to android 6 and then the patch certificate option worked and my s7 connects to the network again.
I'm having a similar problem with my sm-g935w8 Rodgers but has been unlocked. A couple days ago i looked at my phone and it was showing a no signal symbol and I look for my phones information and it showed unknown in all categories, the imei say unknown, and it's not reading the sim. Help me
I am having the same problem after installing TGP ROM.
Graschuk said:
I am having the same problem after installing TGP ROM.
Click to expand...
Click to collapse
Did u Found any solution? am still in the same position as u r in.. i have also installed TGP ROM ... I Have Also Posted there my issue that i selected the latest bootloader nd modem blah blah
Wipe everything in twrp advanced and..
Flash latest stock rom for your model and it'll fix the issue
I think u need to see this
https://forum.xda-developers.com/showthread.php?p=78868375#post78868375
These two threads are the fountains of info :
https://forum.xda-developers.com/s7-edge/how-to/guide-how-to-fix-check-drk-imei-issues-t3379516
This one specifically for S7 edge, whole lots of info.
https://forum.xda-developers.com/note-4/general/fix-drk-dm-verity-factory-csc-serial-t3422965
This one for advanced users who know what they are doing.. it isn't specifically for s7 series but has a universal approach to understand concepts.. don't use the provided drk (prov data) and csc restoring files, they aren't for s7 edge.
Always backup efs and all radio/serial related info firstly after rooting. Good luck
Sent from my S7 Edge using XDA Labs
Greetings Folks
I have a N910C and as mentioned in title recently I got stuck in to this issue
How it happened
I had CF-Rooted my phone and Odin flashed TWRP for custom ROMS so I tried a few and was not getting the perfomance thought SimplROM would do it for me in order to install that ROM it said in instructions to install latest Modem and Bootloader
So i tried downloading the ones given in v6C BL was downloaded but CP kept on giving me errors getting stuck at 7% on mega so being stupid I downloaded DPCB(MODEM) While ROM was offering DPK4
So everything went fine until after boot I realized am facing Not Registered to Network
Since I had experienced this before on other phone I went ASAP in dialer to check my IMEI & SN both are still intact
I knew about EFS unfortunately I backed it up on Phone Storage which was wiped for ROM and I forgot (So dont have EFS Backup )
I do recall years ago back when I had S3 I experienced this and sometimes flashing different firmware(CSC ,Modem) fixed it
What I have tried so far
I have already tried several stock ROMs most of em had DPI1 Baseband except 2 other ROMS no luck
tried combination file method too (the one that helps downgrade to kitkat i believe ) no luck
Tried XEO repair Firmware no luck
any suggestions ??
and on that contrary now that I am not on stock is there any way to find out which CSC and Stock ROM this phone originally was one or came with with IMEI or Serial I believe ?
Thanks in Advance
Anyone??
under the battery there's the serial number
install on your pc samsung smart switch program
run it with option of emergency software recovery - device initialisation
input the model of your phone
input the serial number
start
have patience and a good connection
your phone will (eventually) get the latest official firmware
https://www.blogtechtips.com/2017/06/24/easily-restore-samsung-device-firmware-with-smart-switch/
at least you'll have a working phone with stock rom
from here on you can try again and get informed better on what to do
good luck
w41ru5 said:
under the battery there's the serial number
install on your pc samsung smart switch program
run it with option of emergency software recovery - device initialisation
input the model of your phone
input the serial number
start
have patience and a good connection
your phone will (eventually) get the latest official firmware
https://www.blogtechtips.com/2017/06/24/easily-restore-samsung-device-firmware-with-smart-switch/
at least you'll have a working phone with stock rom
from here on you can try again and get informed better on what to do
good luck
Click to expand...
Click to collapse
Hey there bud I have almost tried most of fixes I could I'll give Smart Switch a try as I recall I checked before it didn't have initialization just the recovery mode, while in Kies 3 I did try initialization method by model and SN but it prompted device doesn't support initialization
Anyways do you think it could fix network?
Sent from my Pixel 2 XL using Tapatalk
crossmedia said:
Hey there bud I have almost tried most of fixes I could I'll give Smart Switch a try as I recall I checked before it didn't have initialization just the recovery mode, while in Kies 3 I did try initialization method by model and SN but it prompted device doesn't support initialization
Anyways do you think it could fix network?
Click to expand...
Click to collapse
Maybe restore the efs from recovery, if you have a backup that was working.
w41ru5 said:
Maybe restore the efs from recovery, if you have a backup that was working.
Click to expand...
Click to collapse
Jist checked not getting initialization option on smart switch ill see a work around it if its a version thing , as for working backup I lost it mate it was in twrp folder in phone storage it got wiped recovery softwares out there only help recovering media mostly if mass storage mount was option could have tried recovering for PC but that has been long gone since ICS
Sent from my Pixel 2 XL using Tapatalk
Yep. Same problem as mine. Im kinda lost now since i dont have anything; even in stock rom it cannot go beyond connecting to my carrier. It only able to read my contact.
Im guessing its a motherboard problem? Isnt it @w41ru5?
VannM said:
Yep. Same problem as mine. Im kinda lost now since i dont have anything; even in stock rom it cannot go beyond connecting to my carrier. It only able to read my contact.
Im guessing its a motherboard problem? Isnt it @w41ru5?
Click to expand...
Click to collapse
I don't know. Usually it's a modem issue when not recognizing the sim.
If it's a 910F snapdragon it might be the infamous eMMC issue.
If you have an EFS backup try to restore it from recovery TWRP.
Assuming its modem problem, its related to motherboard i guess, right?
Finally got the phone working, only to discovered that SIM not working. Really wasting my time and hype!
Plus, its hard to search for n910c replacement board here.
VannM said:
Assuming its modem problem, its related to motherboard i guess, right?
Finally got the phone working, only to discovered that SIM not working. Really wasting my time and hype!
Plus, its hard to search for n910c replacement board here.
Click to expand...
Click to collapse
The firmware, not the physical one.
Did you try to flash the 4 files repair firmware?
This is an example, I don't know what phone you have
https://firmware.gem-flash.com/index.php?a=downloads&b=folder&id=7081
Did you try the SmartSwitch pc program?
"...4 file repair..."- what? Ive google it until im almost run out of data here and you have a possible solution? You must be active in note4 forum.
One thing i noticed that, the IMEI and Serial Number are different from the sticker included.
I will try it, but not immediately; waiting for thurday-friday for data renewal.
My phone is n910c
EDIT : just checked the page you gave. I have few question;
What should i do with the files? What are the step? What are the program needed?
Is it related to SmartSwitch as you mention; need to use it?
Thanks!
VannM said:
"...4 file repair..."- what? Ive google it until im almost run out of data here and you have a possible solution? You must be active in note4 forum.
One thing i noticed that, the IMEI and Serial Number are different from the sticker included.
I will try it, but not immediately; waiting for thurday-friday for data renewal.
My phone is n910c
EDIT : just checked the page you gave. I have few question;
What should i do with the files? What are the step? What are the program needed?
Is it related to SmartSwitch as you mention; need to use it?
Thanks!
Click to expand...
Click to collapse
1. It's good you still have the IMEI. Not so important if they're different from the sticker. Where did you buy the phone from?
2. So if you go to check the 4 files repair, you need to search on that site the files for a 910C.
3. Did the phone worked on your country provider? If yes, maybe you need to search for the 4files corresponding to your region code.
4. These 4files have to be flashed with Odin
https://zfirmware.com/download-samsung-repair-firmwares/
5. SmartSwitch is an alternative to get the latest firmware for your phone according with the model and serial number.
https://www.sammobile.com/forum/threads/29914-SmartSwitch-Install-amp-update-or-replace-firmware
the "firmware.gem" are useless. the error says i need another package (i assume a quota) to download the needed files.
im currently testing "zfirmware", but have a doubt since it only give 1 type file (which country is it i dunno). but yeah, since my phone like that, it wouldnt hurt to try
EDIT : yep, nothing changed. the device not even bricked.
VannM said:
the "firmware.gem" are useless. the error says i need another package (i assume a quota) to download the needed files.
im currently testing "zfirmware", but have a doubt since it only give 1 type file (which country is it i dunno). but yeah, since my phone like that, it wouldnt hurt to try
EDIT : yep, nothing changed. the device not even bricked.
Click to expand...
Click to collapse
If something does not work, why do you give up so easy?
http://www.mediafire.com/file/a2fdo0xm9nat5jt/N910CXXS2DPJ3_N910CZTO2DPE2_ZTO.zip - this is marshmallow
https://androidfilehost.com/?fid=24269982087001472 - this is for lolipop
Put the phone in download mode, open Odin and try.
And try the smartswitch also.
w41ru5 said:
If something does not work, why do you give up so easy?
Click to expand...
Click to collapse
That hurts. A lot. Explanation below.
w41ru5 said:
http://www.mediafire.com/file/a2fdo0xm9nat5jt/N910CXXS2DPJ3_N910CZTO2DPE2_ZTO.zip - this is marshmallow
https://androidfilehost.com/?fid=24269982087001472 - this is for lolipop
Put the phone in download mode, open Odin and try.
And try the smartswitch also.
Click to expand...
Click to collapse
I tried files from LP and MM. It didnt work. And also smartswitch.
I was hoping that it will brick the phone (if i ever missed a step or incorrect file) but it didnt.
Might as well try looking for replacement board (or even a refurbished note4).
Thanks though for the suggestion @w41ru5!
Greetings again folks reading your replies above I have been trying almost every fix there is out there
First of all about Emergency Calls Only/Not Registered on Network
It can be due to several causes its can be Hardware ie faulty modem
it can be bad network coverage
it can be bad simcard
it can be SW with EFS problems or maybe even on rare occasion a modem file that you flashed
EFS can be either bad IMEI with CERT : FAIL or Just Network with IMEI and SN intact
just dial *#0011*# and see if you have CERT : PASS ( also someone with good IMEI/CERT and working network can share screenshot so i can compare whats wrong)
I am certain mine is EFS related because it happened after flashing modem DPCB modem via ODIN (I had TWRP EFS backup but the blunder I made was backing it up on phone storage and being careless forgot it was there and was wiped for custom ROM flashing process)
So far what I have tried
Combination File Method (and even downgrade to KK 4.4.4 )
Repair Firmware that include AP,BL,CP,CSC and even PIT
Kies 3 or Older Smart Switch says (Device doesn't support initialization ) since initialization feature was removed by Samsung on newer Smartswitch(since it was being used for wrong reasons? read somewhere)
Several different firmware's
OTA update
My IMEI CERT says PASS if only we had a network patch like Ariza Patch (for Galaxy S3) for Note 4 then we would be in luck so far at this point I dont think flashing ROM's would even help with bad EFS our only luck is Box e.g Z3x or Octo dont know if we are allowed to talk about those here (ill edit post if not)
these box applications have Network Patch for most Samsung models but I don't see one for N910C in most versions
for those with bad IMEI they can try writing good cert or efs on note 4 since they have already lost it I am sitting on it because my EFS is good on that part and for some reason box app isnt allowing me to back up my CERT if I am able to back up current cert then ill give those a try but I would prefer current IMEI since in my country IMEI should be verified to use the phone or you have to pay tax
I know its Bad EFS for sure because using Box application I chose reset EFS(after backing up current faulty EFS with good IMEI) upon reboot phone's imei was changed with no SN network came back for few seconds then gone again ,this happened to many users that have tried resetting EFS so I restored my original EFS
if anyone here with N910C and root can give me EFS folder I can corelate if any file required for network is missing since i have good IMEI
Cheers!