HELLO
He's only a day old.
I was trying to unlock the bootloader with fastboot but something must have gone wrong. Now will not turn on, is not recognized by the PC.
What can I do?
Hi,
Can you give some more detail on what happened? And by won't turn on is it nothing or just Google logo?
Also see the first few posts here
http://forum.xda-developers.com/showthread.php?t=2670400
Sent from my Nexus 4 using XDA Premium 4 mobile app
demkantor said:
Hi,
Can you give some more detail on what happened? And by won't turn on is it nothing or just Google logo?
Also see the first few posts here
http://forum.xda-developers.com/showthread.php?t=2670400
Sent from my Nexus 4 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I wanted to unlock the bootloader.
The error I think is that I used fastboot for Nexus S
Now the phone is always black (off)
If I connect it to my PC, it is not recognized.
If I hold down the power button with the USB cable connected,the battery symbol appears on the screen. The battery symbol turns on and off intermittently. When i release the power button, the symbol does not appear
There isn't a different fastboot binary for different devices, what all did you type into PC? Was it just fastboot oem unlock , or was there more that happened before tablet went dead?
Sent from my Nexus 7 using XDA Premium 4 mobile app
demkantor said:
There isn't a different fastboot binary for different devices, what all did you type into PC? Was it just fastboot oem unlock , or was there more that happened before tablet went dead?
Sent from my Nexus 7 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
maybe i typed "fastboot usb"(with fastboot Nexus 10) or "fastboot-windows oem unlock"(with fastboot nexus s)
I'm not sure if I'm still following, none of this would cause your tablet to brick, was there anything else that happened?
Try other USB cables and chargers, try charging it over night and try again tomorrow
Sent from my Nexus 7 using XDA Premium 4 mobile app
Now the tablet i connected to the electrical outlet.
Now Is is on. it is booted.
I read battery charging (0%)
It's possible?
Before powering off, the battery charge was at 65%
You may have a bad battery or just a fluke, either way charge it full and try again
Sent from my Nexus 4 using XDA Premium 4 mobile app
demkantor said:
You may have a bad battery or just a fluke, either way charge it full and try again
Sent from my Nexus 4 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
My device is updated to 4.4.3
I unlocked the bootloader with toolkit 1.8.3
To reboot my tablet is blocked by a 15-minute loading. It's locked during movements of the colored balls
Why did not it work fastboot?
When I run a command, for example "fastboot oem lock", it remains blocked <waiting for device>?
A guide to format everything and reinstall the stock rom?
This means your PC isn't detecting your tablet, if on windows more than likely a driver issue
Sent from my Nexus 4 using XDA Premium 4 mobile app
demkantor said:
This means your PC isn't detecting your tablet, if on windows more than likely a driver issue
Sent from my Nexus 4 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Windows 7 detects tablet and installs the drivers, but fastboot does not detect it.
Tried with 2 computers.
Both with windows 7 64bit
Than you don't have the proper drivers installed or you don't have fastboot installed properly or you have a bad USB cable or your not in bootloader on tab.
Most likely issue is windows installed the wrong drivers, download the appropriate ones and manually install and then try again
Sent from my Nexus 4 using XDA Premium 4 mobile app
demkantor said:
Than you don't have the proper drivers installed or you don't have fastboot installed properly or you have a bad USB cable or your not in bootloader on tab.
Most likely issue is windows installed the wrong drivers, download the appropriate ones and manually install and then try again
Sent from my Nexus 4 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
1)Drivers are installed correctly
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2)I installed fastboot from SDK Tools
However, I installed 32-bit Java because Java 64-bit did not go on installing the SDK TOOLS
3)The Tablet is in Downloading Mode
when I restart the tablet and remains stationary here
start the installation of these drivers
but the installation failed
UPDATING
I have installed Universal Naked Driver 0.72 while the tablet was in loading infinite (view photo)
Now what do I do?
So when in bootloader mode and you open cmd on PC and type
fastboot devices
Do you see your serial #, if so you are good and can get the tablet all fixed up, if not you'll need to try to get the right drivers
Sent from my Nexus 4 using XDA Premium 4 mobile app
Hi,
I second @demkantor, it's very likely it's a driver issue. First! Don't Panic!! You're only with a bootloop now, it's the less of concerns. A bootloop is quite easy to fix. Did you check the first three posts in Manta Help Thread?
http://forum.xda-developers.com/showthread.php?t=2670400
They may be very useful for you!
~Lord
Friends, THANKS
But i resolved
fashion_live said:
Friends, THANKS
But i resolved
Click to expand...
Click to collapse
Nice! You have a galaxy nexus too?
Sent from my Galaxy Nexus using XDA Free mobile app
Related
I am not familiar with the assembly and disassebly of tablets/phones but i have played around with the disassebly of a car's ecu. When a definition or usb cable is bad when flashing the ecu, bricking the ecu happens instantly but 95% of the time the bricked ecu can be recovered very easily with a power supply.
If i happened to brick the Nexus 7, can it be easily recovered?
rrkpitt15 said:
I am not familiar with the assembly and disassebly of tablets/phones but i have played around with the disassebly of a car's ecu. When a definition or usb cable is bad when flashing the ecu, bricking the ecu happens instantly but 95% of the time the bricked ecu can be recovered very easily with a power supply.
If i happened to brick the Nexus 7, can it be easily recovered?
Click to expand...
Click to collapse
Even though I have a bricked unit, it was because I was doing something stupid. 99% of the time, you can't really brick your tablet. Even if you screw it up where it won't boot, you can still connect it to the PC and push a factory reset to it and have it restored.
I've already done this a few times. The first time I freaked out, but once you restore it the first time you find out it's all gravy.
As long as you can get into the bootloader (power+ volume buttons when powered off) , and you have the factory image from here you can reflash it
how can you push it? if it wont get past the screen. I can get into recovery btw
extract the factory image to your folder with fastboot (typically platform-tools) then go into the bootloader and use the commands here
Beagan said:
how can you push it? if it wont get past the screen. I can get into recovery btw
Click to expand...
Click to collapse
fastboot or adb from the PC is the short answer.
I couldn't even get into the Bootloader. It just stayed off. The screen wouldn't come on. The only thing I could do was get an APX connection on the PC which is completely useless at this point. Nothing worked.
I couldn't even get the screen to come on thus NO FASTBOOT commands. If anyone knows how to restore a N7 without adb or fastboot commands, I'd be thankful.
I returned mine back to Staples. If your screen turns on and gets stuck at the Google Logo or you can get into Recovery, then it isn't bricked and easily fixable.
Try the nexus toolkit. Worked for me!!
Sent from my GT-I9100 using xda premium
I've had to use my jig several times. It boots up fine after that.
Beagan said:
Try the nexus toolkit. Worked for me!!
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
I think I may have finally killed mine.
I was flashing back to stock (woke up at 3am and couldn't get back to sleep. What else was there to do?) and in the middle of the toolkit sending "system" my data cable came loose. Fun! So I rebooted and had toolkit push again...waited 20 minutes with no luck.
So I did it all again and left the bastard on while I'm at work. Unless its pregnant...it shouldn't need more than 9 hours to push right?
rudeguy said:
I think I may have finally killed mine.
I was flashing back to stock (woke up at 3am and couldn't get back to sleep. What else was there to do?) and in the middle of the toolkit sending "system" my data cable came loose. Fun! So I rebooted and had toolkit push again...waited 20 minutes with no luck.
So I did it all again and left the bastard on while I'm at work. Unless its pregnant...it shouldn't need more than 9 hours to push right?
Click to expand...
Click to collapse
Try using fastboot commands rather than the toolkit so we know where it's erroring out and can potentially help.
Jubakuba said:
Try using fastboot commands rather than the toolkit so we know where it's erroring out and can potentially help.
Click to expand...
Click to collapse
can do
I know its not bricked...just didn't have enough time to get into really trying to fix it. My rule with Android devices is if its not smoking, its not dead yet.
hmmmm...so apparently I'm having some system img issues.
I downloaded the one linked to earlier and I also tried using the one included with Nexus Tools. What am I missing?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
well that was messed up
Had to uninstall every single thing associated with my Nexus (drivers, Nexus Tool, all files) and restart from scratch. Now I'm good and I have 4.5 gigs free again!
omar411269 said:
Hey man. I think I bricked my Nexus 7 by accidentally erasing the bootloader. I can't turn it on at all (press power, press power and volume). I can connect it via USB and I get a pop-up "USB Device has malfunctioned" so I know something is sparking somewhere.
I am stupid. I know.
Is there anyway to save my N7?
Click to expand...
Click to collapse
How did you accidentally erase the bootloader? Don't you have to type it in?
I think i've bricked mine.
Not booting to anything even bootloader. When i attach power to it all i get is 'static' type stuff
any ideas?
ajg007 said:
I think i've bricked mine.
Not booting to anything even bootloader. When i attach power to it all i get is 'static' type stuff
any ideas?
Click to expand...
Click to collapse
try power botton and volume down keep them hold in
f1kid said:
try power botton and volume down keep them hold in
Click to expand...
Click to collapse
yep, all i get is the static!
---------- Post added at 08:15 PM ---------- Previous post was at 07:47 PM ----------
NVM
sorted it.
carefully opened it up and found the battery cable not fully inserted.
loading up to bootloader now
My nexus has been rooted. I up rom 4.3 by nexus 7 toolkit failed. When it change to fastboot mode, recovery failed, start failed so i choose power off. Now it won't boot just black screen forever (. Somebody help me please !
minhpro9xhp said:
My nexus has been rooted. I up rom 4.3 by nexus 7 toolkit failed. When it change to fastboot mode, recovery failed, start failed so i choose power off. Now it won't boot just black screen forever (. Somebody help me please !
Click to expand...
Click to collapse
Just manually try flashing recovery through fastboot .
Code:
fastboot flash recovery recovery.IMG
There are tons of similar threads like this . please try to search before posting.
Red Devil said:
Just manually try flashing recovery through fastboot .
Code:
fastboot flash recovery recovery.IMG
There are tons of similar threads like this . please try to search before posting.
Click to expand...
Click to collapse
Thank for your help but i tried and it just show "waiting for devices". My nexus still not display
minhpro9xhp said:
Thank for your help but i tried and it just show "waiting for devices". My nexus still not display
Click to expand...
Click to collapse
Oh did you install the drivers that are required on Windows from Asus ? Make sure you install them.
Code:
fastboot devices
will let you know if your device is connected well.
Red Devil said:
Oh did you install the drivers that are required on Windows from Asus ? Make sure you install them.
Code:
fastboot devices
will let you know if your device is connected well.
Click to expand...
Click to collapse
yes, i insalled driver from asus and i tried to press POWER ON and VOLUME DOWN so it change to APX mode. So, i update driver, pick driver from my computer>C:user/minh/download/usb_driver and nexus 7 still on APX mode with "ASUS Transformer prime APX interface" driver.
fastboot devices--->nothing
adb devices-->nothing
hi same thing happened to me
can you post the link of where to get the asus drivers from
any luck with your nexus yet??
Driver from Asus? Pretty sure you just use the one from the Android SDK.
GldRush98 said:
Driver from Asus? Pretty sure you just use the one from the Android SDK.
Click to expand...
Click to collapse
thanks for that
and do you have any idea on how to get the nexus back up and running
or anyone else
Can you get in to fastboot? If so, you can flash a recovery or system imaged or anything from there. Fastboot should always work (volume up + volume down + power all at the same time)
GldRush98 said:
Can you get in to fastboot? If so, you can flash a recovery or system imaged or anything from there. Fastboot should always work (volume up + volume down + power all at the same time)
Click to expand...
Click to collapse
yes i was, when in fastboot mode i choosed start and recovery mode but all failed so i choosed power off (very stupid thing). Now my device is brick.
minhpro9xhp said:
yes i was, when in fastboot mode i choosed start and recovery mode but all failed so i choosed power off (very stupid thing). Now my device is brick.
Click to expand...
Click to collapse
Tried plugging it in to the a/c adapter and charging for a few hours?
minhpro9xhp said:
fastboot devices--->nothing
adb devices-->nothing
Click to expand...
Click to collapse
^ This sounds like a driver issue if you are not getting anything to show up. You could try the zip I have attached its the google drivers I use and they work fine.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
View attachment google-usb_driver.zip
GldRush98 said:
Tried plugging it in to the a/c adapter and charging for a few hours?
Click to expand...
Click to collapse
i tried
dpdurst said:
^ This sounds like a driver issue if you are not getting anything to show up. You could try the zip I have attached its the google drivers I use and they work fine.
Click to expand...
Click to collapse
i don't thing the driver issue, i tried many driver but it not working.
google nexus 7 ADB interface
google nexus ADB interface
google nexus 7 BootLoader interface
google nexus bootloader interface
asus fastboot interface
...
thanks for replying
i tried many times to do various combinations o fholding down the power and up,down volume...nothing
i will try later when i am on my desktop to look at fastboot...and update the drivers
right now when i plug the nexus into the pc it comes up as not recognised...
if the nexus were completely dead would it still even come up in the device manager??
i also tried to pull the battery for a few minutes and then try again....nothing
i charge it into the mains with cable and nothing...
i will need to check it when i get home on my main pc in a few hours
please wirte any further siggestions or any web video/links which may help in this situation
THIS is the point where i turned the power off in the FIRST SCREEN
http://loewald.com/blog/?p=5198
i am on my main pc right now
i have downloaded the SDK manager and installed the Android SDK platform tools and Google USB driver
nothing happens when i plug the nexus into the PC
do i need to actually manually install these drivers or they are already installed when i ran the SDK manager...
the nexus shows as unknown device right now
Try to install WugFresh's toolkit. http://www.wugfresh.com/
Follow the driver installation guide and make sure thet the previous drivers is removed.
Choose the recomended driver.
If you can start your device in fastboot mode (bootloader) it should be salvageable.
If you use Windows 8, getting a working driver can be quite a struggle.
it was wugfresh toolkit that i was using
so i uninstalled all drivers and installed the drivers from his toolkit
sadly the usb device is still not recognised
well, i searched google and they said there was one way to fix hard brick nexus 7. It is using "JIG usb". If somebody used "JIG usb" please reply me.
I think I'm having the same problem as you, but I am still able to get into bootloader mode. It may take up to around 20 seconds holding the volume down and power button to get back into bootloader mode. In fastboot bootloader, going into recovery freezes (freezes on the "Teamwin" screen), "start" freezes on the "Google" screen with padlock unlocked. Used Wug's to try to go back to factory setting (but to 4.3 instead of 4.2.2), failed to write 'bootloader' and device never boots back up when it says "waiting for device". Then tried using Nexus 7 toolkit (not Wug's) to lock it back up and now I can't unlock again...same thing..."waiting for device" and device never boots back up.
any update for this problem?
any update for this problem?
i try alot of solution but nothing change
i saw N7 can connect to APX with correct Driver however we can do anything
i try connect power about 8 h but nothing change
what the F *K with OTA update ........
Hello, first sorry for my english, i come here because i don't find help on my mother language forum for this.
After a update fail, my lg is stuck on lg logo, i don't have access to download or recovery mode. Just "fastboot mode started" when i plug the phone and i hold volume up... So i want to follow the tutoriel with the adb and fastboot application on cmd but that don't detect my phone...
If i look on Device Manager, my phone is detect by Windows as "LGE AndroidNet USB Serial Port " when the phone is stuck on LG LOGO, and if the phone is in fastboot mode (vol up + plug'in) is detect in other devices as "Android?"
I open a cmd, i go to the folder with "c /adb", after i searched for the devices with "adb devices", but no result in the list...if i try directly "fastboot erase boot" the terminal say me "waiting for the device"
I have install ubuntu, and the same...with " ls /dev/sd*" no result..
i hope somebody can help me !!!! thanks in advance
I finally managed to apply fastboot method, but now I 'm stuck on a black screen and the computer detect qhsusb_bulk
in fact, nobody help nobody here !?..
Does your phone show up as multiple disk drives if so download srk tool for lg g2 and unbrick your phone using that app.
Sent from my LG-D800 using XDA Free mobile app
hi, thanks,
no i don't have the multiple disk drives, I still tested but it did not work... and my phone isn't detect by my ubuntu, how i can fix it ? when i enter the ls /dev/sd* i have no device
do you think the "shortcut connector" method can help me ?
xmayhemreturnsx said:
Does your phone show up as multiple disk drives if so download srk tool for lg g2 and unbrick your phone using that app.
Sent from my LG-D800 using XDA Free mobile app
Click to expand...
Click to collapse
Do you have team viewer? Pm me.
Sent from my LG-D800 using XDA Free mobile app
Hi, i have fix the fastboot error et copy files, and now my phone have a black screen and is identify as QHSUSB_BULK.
Generally that is accompagned with multiple disk but not for me, i have tested srktool but that make nothing.
Any ideas ? th8
You must be in Qualcomm 9008 mode then. You need windows xp and Qualcomm drivers, tot for your phone, and lg drivers. There is a thread on XDA for Qualcomm 9008 go check it out.
Sent from my LG-D800 using XDA Free mobile app
thank you @xmayhemreturnsx
on the xda thread that you give me they said : Please NOTE. DO NOT TRY this unlesss you are 100% sure you are in Qualcomm HS-USB QDLoader 9008 mode ,
this is different from the qhsusb_bulk....
Download the LGG2_9008_FIX.zip LGG2_9008_FIX.zip
Updated version available : BoardDiag3.99c.zip , you could try either one of these!
Click to expand...
Click to collapse
These files are adapted for my D800 ? Can you help me about the tot file i must take ( can i take the latest version of d800 ou another ) ?
And about the qhsusb_driver that you send me, that is a 64bits ? because i'm 32bits.. i don'k know very well what to do with that, after i selected the driver in device manager, that make a popup and i return in qhsusb mode
You need to install Qualcomm drivers in order to know if you have qhs-usb 9008 but since you do not have multiple disk drives it's safe to assume that you are in 9008 mode.
Sent from my LG-D800 using XDA Free mobile app
---------- Post added at 03:54 AM ---------- Previous post was at 03:51 AM ----------
http://storagecow.eu/index.php?dir=Xda/LG+G2/Stock/AT&T/
This is where you can get the tot file download the one for October.
Sent from my LG-D800 using XDA Free mobile app
---------- Post added at 04:02 AM ---------- Previous post was at 03:54 AM ----------
http://www.mediafire.com/download/xn...ualcommDrv.zip
Driver
Sent from my LG-D800 using XDA Free mobile app
thanks you. the download just finish. i try this !
i have extract the files from .tot files => OK
i go Step 3: Test AP & EMMC and => failed !
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ps: i have already test with the other version "boardDiag3.99" and same issues...
hi all
i got a LG G2 d801 that i flash on it a 802 stock rom and now its stuck on the LG logo
and when i try to get into its stuck on the download mode with the 3 blue circles and not switch to the update software screen
all thow it do enter to the update software screen and i flash the d802 stock rom and after the time i flashed the lollipop stock rom it didnt enter anymore
what i do manage to get in the update with the sideload
i really dont know what else to do
i really thank you all
I'll be grateful to those who will solve my problem
tvruikuzui123 said:
hi all
i got a LG G2 d801 that i flash on it a 802 stock rom and now its stuck on the LG logo
and when i try to get into its stuck on the download mode with the 3 blue circles and not switch to the update software screen
all thow it do enter to the update software screen and i flash the d802 stock rom and after the time i flashed the lollipop stock rom it didnt enter anymore
what i do manage to get in the update with the sideload
i really dont know what else to do
i really thank you all
I'll be grateful to those who will solve my problem
Click to expand...
Click to collapse
Do you know how to use the Snipping Tool in Windows?
If you do,connect your g2 to the pc,go to Device Manager,expand all connections,and take a ss with the Snipping tool.
Sent from my LG-D802 using XDA Forums Pro.
The Marionette said:
Do you know how to use the Snipping Tool in Windows?
If you do,connect your g2 to the pc,go to Device Manager,expand all connections,and take a ss with the Snipping tool.
Sent from my LG-D802 using XDA Forums Pro.
Click to expand...
Click to collapse
Snip when its stuck on the lg logo?
tvruikuzui123 said:
Snip when its stuck on the lg logo?
Click to expand...
Click to collapse
Snipping Tools is an application in Windows. It lets you make a screenshot of your screen in WINDOWS.
It is just like the screenshot taken on Android,but this Windows app makes a screenshot of your Windows Desktop/apps.
You can also Google the term "Windows Snipping Tool"
And you can also look for a video of a person using it,if you still do not know how to use it.
Sent from my LG-D802 using XDA Forums Pro.
The Marionette said:
Snipping Tools is an application in Windows. It lets you make a screenshot of your screen in WINDOWS.
It is just like the screenshot taken on Android,but this Windows app makes a screenshot of your Windows Desktop/apps.
You can also Google the term "Windows Snipping Tool"
And you can also look for a video of a person using it,if you still do not know how to use it.
Sent from my LG-D802 using XDA Forums Pro.
Click to expand...
Click to collapse
this is all i pics of the problem
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
tvruikuzui123 said:
this is all i pics of the problem
]
Click to expand...
Click to collapse
I need the shot of the device manager when you connect your phone NORMALLY,not in download mode!!!!
The Marionette said:
I need the shot of the device manager when you connect your phone NORMALLY,not in download mode!!!!
Click to expand...
Click to collapse
this is shot when i connect it normaly
its not getting out of the "lg" logo
i gave the shot of the download mode its not getting to the "Software Update" screen its stuck on the 3 blue circles
where is some way to recover the phone with the "apply update from adb" fanction
tvruikuzui123 said:
this is shot when i connect it normaly
its not getting out of the "lg" logo
i gave the shot of the download mode its not getting to the "Software Update" screen its stuck on the 3 blue circles
where is some way to recover the phone with the "apply update from adb" fanction
Click to expand...
Click to collapse
POWER OFF THE PHONE BY HOLDING THE POWER BUTTON FOR 30 seconds
CONNECT THE POWERED-OFF PHONE TO THE PC
THERE WILL BE THE LG LOGO,AND THAT IS WHAT YOU NEED
THEN TAKE AN SS OF THE DEVICE MANAGER
DO NOT CONNECT IN DOWNLOAD MODE
The Marionette said:
You seriously have trouble understanding English...
POWER OFF THE PHONE BY HOLDING THE POWER BUTTON FOR 30 seconds
CONNECT THE POWERED-OFF PHONE TO THE PC
THERE WILL BE THE LG LOGO,AND THAT IS WHAT YOU NEED
THEN TAKE AN SS OF THE DEVICE MANAGER
DO NOT CONNECT IN DOWNLOAD MODE
Click to expand...
Click to collapse
this tha you want
tvruikuzui123 said:
this tha you want
Click to expand...
Click to collapse
Which OS are you running? Because my Device Manager doesn`t look like yours(here is the ss of mine)
Can you connect the powered-off g2 to a PC which has Windows 7/8?
Also,download the USB Drivers for the G2:http://androidxda.com/download-lg-usb-drivers
look for the G2 ones in the list and install them on a Windows PC
EDIT
Okay,that is Windows that you are using...
Also,download ADB Fastboot drivers.
The Marionette said:
Which OS are you running? Because my Device Manager doesn`t look like yours(here is the ss of mine)
Can you connect the powered-off g2 to a PC which has Windows 7/8?
Also,download the USB Drivers for the G2:http://androidxda.com/download-lg-usb-drivers
look for the G2 ones in the list and install them on a Windows PC
EDIT
Okay,that is Windows that you are using...
Also,download ADB Fastboot drivers.
Click to expand...
Click to collapse
im using windows 7 its on hebrow
now there is somethig strange i install your usb drivers and every 1 or 2 minuits the computer try to install drivers
tvruikuzui123 said:
im using windows 7 its on hebrow
now there is somethig strange i install your usb drivers and every 1 or 2 minuits the computer try to install drivers
Click to expand...
Click to collapse
is the phone connected?
If it is,that isnt bad.
The thing is,while that lg logo stands and the phone is conncted to the PC,its connecting all the partitions(there are more than 10 of the partitions),so let your pc install those drivers and do not disconnect your phone from the pc!
EDIT
Also,if you can,on a pc you never connected your g2 to,install the LG usb drivers and the adb fastboot drivers.
And then connect the g2(but first let the current pc you are using install the drivers.
EDIT#1
I will be away for 2 hours,but I can give you the link to this thread:
http://forum.xda-developers.com/showthread.php?t=2432476&page=1030
I suggest you post your problem there.
The OP is extremely,and definitely more capable than me.
The Marionette said:
is the phone connected?
If it is,that isnt bad.
The thing is,while that lg logo stands and the phone is conncted to the PC,its connecting all the partitions(there are more than 10 of the partitions),so let your pc install those drivers and do not disconnect your phone from the pc!
EDIT
Also,if you can,on a pc you never connected your g2 to,install the LG usb drivers and the adb fastboot drivers.
And then connect the g2(but first let the current pc you are using install the drivers.
Click to expand...
Click to collapse
so i just need to connect the phone and let my PC install the drivers?
then what?
tvruikuzui123 said:
so i just need to connect the phone and let my PC install the drivers?
then what?
Click to expand...
Click to collapse
Yes,leave it to install the drivers.
Then you should see something like QHUSB BULK in the "Device Manager",and there should be many drives visible in "My Computer".
Hey guys,
Back May when dp3 came out, I went ahead and installed it. Now I'm stuck without a working twerp because I'm encrypted. Problem is I can get dab to work when the phone is on but cant connect to it from bootloader. I'm using the same pc from when I first rooted it...so I know that end is ok. Here's what I've done so far.....I've uninstalled all other drivers and have installed and checked with googles usb driver and clockwork mod universal drivers. I've used usbdeviw to make sure I had no conflicts there. I've tried all usb ports and different cables. I'm using win10, sdk is system wide, everything is up-to-date.
jaysway said:
Hey guys,
Back May when dp3 came out, I went ahead and installed it. Now I'm stuck without a working twerp because I'm encrypted. Problem is I can get dab to work when the phone is on but cant connect to it from bootloader. I'm using the same pc from when I first rooted it...so I know that end is ok. Here's what I've done so far.....I've uninstalled all other drivers and have installed and checked with googles usb driver and clockwork mod universal drivers. I've used usbdeviw to make sure I had no conflicts there. I've tried all usb ports and different cables. I'm using win10, sdk is system wide, everything is up-to-date.
Click to expand...
Click to collapse
One more way to confirm is by connecting your device to another PC, and check if fastboot works while your device is in bootloader mode, and adb, when your device is booted in the operating system.
DJBhardwaj said:
One more way to confirm is by connecting your device to another PC, and check if fastboot works while your device is in bootloader mode, and adb, when your device is booted in the operating system.
Click to expand...
Click to collapse
It wont work on my desktop either...same story. I have not done any of the steps i listed though either. Did all that on my laptop and no dice.
jaysway said:
It wont work on my desktop either...same story. I have not done any of the steps i listed though either. Did all that on my laptop and no dice.
Click to expand...
Click to collapse
While it is booted in the operating system, can you get it connect through MTP?
DJBhardwaj said:
While it is booted in the operating system, can you get it connect through MTP?
Click to expand...
Click to collapse
Yes
jaysway said:
Yes
Click to expand...
Click to collapse
Weird. Did you try switching to a different cable?
DJBhardwaj said:
Weird. Did you try switching to a different cable?
Click to expand...
Click to collapse
Yep....still no dice. I feel as if I've exhausted all my known options. Not sure where to go from here.
jaysway said:
Yep....still no dice. I feel as if I've exhausted all my known options. Not sure where to go from here.
Click to expand...
Click to collapse
So while in operating system, and USB debugging enabled, you cannot detect it through the "adb devices" command?
DJBhardwaj said:
So while in operating system, and USB debugging enabled, you cannot detect it through the "adb devices" command?
Click to expand...
Click to collapse
Yes I can
This is while phone is on, usb debug enabled.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And while in bootloader
xx
jaysway said:
This is while phone is on, usb debug enabled.
And while in bootloader
Click to expand...
Click to collapse
ADB doesn't work in the bootloader, only in recovery and booted in Android. You must use "fastboot" <command>, like "fastboot devices" while in the bootloader.
Sent from my Nexus 5X using Tapatalk
jaysway said:
This is while phone is on, usb debug enabled.
And while in bootloader
Click to expand...
Click to collapse
Mate you are doing it wrong here. ADB only operates when Android is loaded into the operating system or when sideloading. While in the bootloader, you need to operate over fastboot. So the right command command would be:
Code:
fastboot devices
Ya just realized. I'm a dumb ass.
jaysway said:
Ya just realized. I'm a dumb ass.
Click to expand...
Click to collapse
No one is. It's a phase we all have gone through. :good: