Nexus 4 dead on 4.4.3 official - Nexus 4 Q&A, Help & Troubleshooting

Hello, i whant to put 4.4.3 on N4 and with normal flash-all.bat(did it many times before on 4.4.2) and then phone was flashing booloader..waiting devices...and nothing.Phone screen is black only a sound on windows when i connect it.
How can i fix my nexus?
Edit: 1)if i shutdown with pwrbutton 10 sec and turn on via pwr+volume i hear as i connected the phone
2)if turn on normal red light a few sec..
Bricked???

Are you able to get to bootloader? Was it unlocked before you flashed the 4.4 3 image
Sent from my HTC One using Tapatalk

mrao said:
Are you able to get to bootloader? Was it unlocked before you flashed the 4.4 3 image
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
1)I had PA before on it
2)Yes i was unlocked
3)Black screen...nothing.Just a beep like i connect it to pc....and a red dot a few seconds.

krystyuc said:
1)I had PA before on it
2)Yes i was unlocked
3)Black screen...nothing.Just a beep like i connect it to pc....and a red dot a few seconds.
Click to expand...
Click to collapse
Just a wag, but have you tried letting it charge first?
Sent with my Nexus® 10 minus 3

Berrydroidcafe said:
Just a wag, but have you tried letting it charge first?
Sent with my Nexus® 10 minus 3
Click to expand...
Click to collapse
Yes.
Edit: If i plugit into a new pc it shows me
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After some serch i think it's bricked....only Jtag can fix it

Don't think its bricked. Try type "fastboot devices" in a command prompt in your fastboot folder. If it shows up under listed devices its not bricked. I've had this happen where just the file that makes the screen light up didn't get installed. Just have to reinstall the bootloader. No big deal.
Scratch that!
I'll buy it from you for $5

M3drvr said:
Don't think its bricked. Try type "fastboot devices" in a command prompt in your fastboot folder. If it shows up under listed devices its not bricked. I've had this happen where just the file that makes the screen light up didn't get installed. Just have to reinstall the bootloader. No big deal.
Scratch that!
I'll buy it from you for $5
Click to expand...
Click to collapse
1)Already tryed that and the adb devices...no luck
2)Nothing is displayed on my n4 screen,absolutly black,but it's still on
3)my pc dose a sound when i connect/disconnect the phone
I found something
"Seems that while flashing that ROM you have managed to destroy parts of the Bootloader, wich finaly results in the device doing nothing. (Black Screen etc)
Partitialy you are right yes "QHS-USB Mode" means your device is hard bricked an in the so called QHS-USB Download Mode
but this mode is meant for vendors to flash bootloaders etc on the devices.
To access the device in a propper way u need some "non-public" tools wich QCOM usaly only supplies to vendors not to endusers!
Without thoose programs u will be not able to access the device in any way, even with thoose tools without the expierience and knowledge and files u need, i guess u will not be able to recover it yourself.
I do not want to risk some trouble with QCom at all so i do not can point u to the propper tools to use but i'm sure when using google u will be able to find out what tools i'm talking about.
In my mind the best way for you to recover that device is a JTAG
So my suggestion is to search for a JTAG in your region a JTAG in europe usaly is arround 30 euro but price can differ in your country"

So.....no luck till now,the phone is hardbricked.I'll send it monday to warranty,maybe they will fix it for free if not....then this is an excuse to buy N5

Related

Need to turn on Moto X Pure *without* power button (not rooted)

Hello all,
I'm in a jam here and hoping one of you can help me out.
The power button on my Moto X Pure Edition, which is not rooted, has stopped working completely. The battery died overnight and, obviously, the phone powered off. Now I can't turn it back on. I'd like to get it turned on or at least get my personal data off of it. Does anyone have any ideas?
I have figured out how to get it into AP Fastboot Flash Mode by holding down the Volume Up & Volume Down buttons simultaneously while plugging it into a power source. But, I cannot select "START" (or anything else) from Fastboot because my power button doesn't work.
Hoping I can figure out how to do this without taking apart the phone, which will void my warranty and probably won't result in me being able to fix it anyway.
Thanks so much for your help!
lowbar said:
Hello all,
I'm in a jam here and hoping one of you can help me out.
The power button on my Moto X Pure Edition, which is not rooted, has stopped working completely. The battery died overnight and, obviously, the phone powered off. Now I can't turn it back on. I'd like to get it turned on or at least get my personal data off of it. Does anyone have any ideas?
I have figured out how to get it into AP Fastboot Flash Mode by holding down the Volume Up & Volume Down buttons simultaneously while plugging it into a power source. But, I cannot select "START" (or anything else) from Fastboot because my power button doesn't work.
Hoping I can figure out how to do this without taking apart the phone, which will void my warranty and probably won't result in me being able to fix it anyway.
Thanks so much for your help!
Click to expand...
Click to collapse
Do you have fastboot installed on your computer? If you do then issue the following command : fastboot reboot
Your phone will now start up.
If you don't, install it. You will have to research how to do it for your system. I'm on Arch Linux, so won't know how to help you, but there will be a google guide.
sr.perro said:
Do you have fastboot installed on your computer? If you do then issue the following command : fastboot reboot
Your phone will now start up.
If you don't, install it. You will have to research how to do it for your system. I'm on Arch Linux, so won't know how to help you, but there will be a google guide.
Click to expand...
Click to collapse
Thank you for the suggestion. Got fastboot installed (used this: http://forum.xda-developers.com/showthread.php?p=48915118#post48915118) but it doesn't appear to be recognizing my device. See attached image. Still working on it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
lowbar said:
Thank you for the suggestion. Got fastboot installed (used this: http://forum.xda-developers.com/showthread.php?p=48915118#post48915118) but it doesn't appear to be recognizing my device. See attached image. Still working on it.
Click to expand...
Click to collapse
Hilarious. After an hour of fumbling around I figured out the USB port I had the phone plugged into was bad. Plugged it into one on the other side of the computer, recognized, rebooted, good to go.
Thanks so much for your help.
lowbar said:
Hilarious. After an hour of fumbling around I figured out the USB port I had the phone plugged into was bad. Plugged it into one on the other side of the computer, recognized, rebooted, good to go.
Thanks so much for your help.
Click to expand...
Click to collapse
Glad you sorted it.
sr.perro said:
Glad you sorted it.
Click to expand...
Click to collapse
hey man. Im having the same issue with my phone, but no matter what i do my pc still wont detect my phone. i don tknow what to do please help.

Bricked my A2017G

Hello guys,
I tried to update my phone to Nougat and I guess I totally failed.
First I just tried to flash this rom: https://forum.xda-developers.com/axon-7/development/rom-purefusionos-official-t3670580 and it did not work. So I thought I might have to update the firmware first and installed the A2017UV1.1.0B32 NOUGAT Update from this thread: https://forum.xda-developers.com/axon-7/development/rom-guide-updates-to-stock-files-via-t3469484. I found out I had to flash (with TWRP) the firmware's G version so I took the A2017G_N_Modem.zip from this https://androidfilehost.com/?w=files&flid=148464.
Now I only get the "your device software can't be checked for corruption. Please lock the bootloader".
Can somehow help me and tell me if and how I can get a rom working again?
Thanks in advance.
Check forum. There are topics to unbrick your device.
Yes, I read the forums. My Problem is that I cannot enter the EDL mode for example. When I git Power + Vol Up + Vol down nothing happen except a shot red LED.
EDIT: I cannot get into fastboot aswell.. Always that screen with lock your bootloader. Pretty much the only mode I can enter is recovery with TWRP.
multimill said:
Yes, I read the forums. My Problem is that I cannot enter the EDL mode for example. When I git Power + Vol Up + Vol down nothing happen except a shot red LED.
EDIT: I cannot get into fastboot aswell.. Always that screen with lock your bootloader. Pretty much the only mode I can enter is recovery with TWRP.
Click to expand...
Click to collapse
When led blinked you are on EDL mode. Screen is black on edl mode.
Yeah I got that an now i completely **** up -.-
I made it to go back to stock. I saw yeah got that B10 version now so I tried to flash PureFusionOS and Beans GApps. Now the screen is just black when I start the phone and my computer (and one other I tested) cannot flash the the edl version via Miflash because the phone is not recognized.
When I try to enter EDL the led is not blinking anymore. Its just showing red.
multimill said:
Yeah I got that an now i completely **** up -.-
I made it to go back to stock. I saw yeah got that B10 version now so I tried to flash PureFusionOS and Beans GApps. Now the screen is just black when I start the phone and my computer (and one other I tested) cannot flash the the edl version via Miflash because the phone is not recognized.
When I try to enter EDL the led is not blinking anymore. Its just showing red.
Click to expand...
Click to collapse
Do you see your device on Device Management? If yes, it is on edl mode. go on other steps
BTW, use this guide.
WesTD said:
Do you see your device on Device Management? If yes, it is on edl mode. go on other steps
BTW, use this guide.
Click to expand...
Click to collapse
Where should I see in the device manager?
EDIT: I do hear a sound when connecting. But I dont know where to find it in the device manager. In which category.
EDIT2: Well I see one device here, but neither the Axontool nor Miflash regonize it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
multimill said:
Where should I see in the device manager?
EDIT: I do hear a sound when connecting. But I dont know where to find it in the device manager. In which category.
EDIT2: Well I see one device here, but neither the Axontool nor Miflash regonize it.
Click to expand...
Click to collapse
Good luck. Your device on DFU Mode. There another guide about it.
multimill said:
Where should I see in the device manager?
EDIT: I do hear a sound when connecting. But I dont know where to find it in the device manager. In which category.
EDIT2: Well I see one device here, but neither the Axontool nor Miflash regonize it.
Click to expand...
Click to collapse
4th category brick repair manual, google it

Huawei p8lite ALE-L21 total hard brick or can fix?Tried all solutionsns..pls help.

Hi.
I tried to update my mother in law Huawei p8 lite,phone in settings showed there is a firmaware update available,so I done a backup then download via wifi android 6.0,after download complete its asked me to procced so i click to yes,phone restart to upgrade mode but was stuck on 0% progress for very long time so I tried to restart the phone via power off button but after that phone doesnt start again any more.
So I readed a lot what to do but nothing work for me.
I download android 6.0 to pc then copy dload folder to sd card,then when card in phone I pressed volume + and - and power the same time but nothing happend,phone just vibrate once for very short time and nothing.
I tried also using adb procedure but phone is not recognized in my laptop with windows 8,all drivers installed I believe,I have mined all internet for proper drivers,all adb and fastboot drivers installed,included huawei drivers and HiSuite softaware and even Handset WinDriver installed and windows 8 only seen device like on picture below:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I plugged phone to laptop via usb cable,short vibrate and nothing,so I press power off and volume down same time and laptop see something but not properly,please check below:
ADB not seen any adb device after command "adb devices" .
I can manulally choose driver for that like e.g ADB interface device but ADB still not see anything.
Tried also with disconnected battery couse read on this forum its help sometimes but nothing,still same.
After doing all that just realize sometimes red led blinking so its mean battery is down,and wont charge via usb on the phone,so I charged battery via external charger connected straight to the wires on battery,now red led not blinking.
Tried also on another laptop with windows xp,same ,nothing happend,adb not see anything,but sometimes in device manager phone is recognized as below:
On other forum when is recognized like that its possible to fix but need special usb box,which I ovcourse dont have.
What else I can try?
Summary:
phone not recognized in laptop,even with unplugged battery
phone wont start,no logo nothing
wont update from sd card wiht dload
is it totally brick?
pls help/
Hi!
i think your phone board was damage in process, happened to me on a Alcatel Idol... The same thing. I think the phone was already a bit laggi, no?
.
Phone was not worked properly,thats what my mother in law said.
Its sometimes show just white screen after unlock,or camera wont switch on.
And battery draining fast.I thought firmware upgrade will fix it but its brick now(
Update:I have fixed the phone with dc phoenix software-Installed new board firmware and then stock rom and its all ok now.
alsat1 said:
Update:I have fixed the phone with dc phoenix software-Installed new board firmware and then stock rom and its all ok now.
Click to expand...
Click to collapse
It would be useful if you did a little tutorial with links.
Thank you
MARCOSOFT said:
It would be useful if you did a little tutorial with links.
Thank you
Click to expand...
Click to collapse
I found informations and tutorial on xda forum so its all here
alsat1 said:
I found informations and tutorial on xda forum so its all here
Click to expand...
Click to collapse
Did you have to pay for the phoenix software?
MARCOSOFT said:
Did you have to pay for the phoenix software?
Click to expand...
Click to collapse
Yes 15 euro for 72hours.

My LeEco Le Pro 3 restarts after 20 seconds.

Hello everyone,
I have a big problem and I can't find a solution.
My phone reboots after 20 seconds.
I just see the logo LeEco and 20 seconds after, it restarts continuously. it does not stop.
I can enter in the fastboot but the usb debugging mode is not enabled so I can' t do anything.
Please, what is the solution ?
Thank you very much
naovich said:
Hello everyone,
I have a big problem and I can't find a solution.
My phone reboots after 20 seconds.
I just see the logo LeEco and 20 seconds after, it restarts continuously. it does not stop.
I can enter in the fastboot but the usb debugging mode is not enabled so I can' t do anything.
Please, what is the solution ?
Thank you very much
Click to expand...
Click to collapse
Are you stock?
Sent from my SM-A730F using xda premium
Yes.
I am on the official Rom. I have never installed any other ROMs and I have never flashed the phone.
Thank you for your reply
naovich said:
Yes.
I am on the official Rom. I have never installed any other ROMs and I have never flashed the phone.
Thank you for your reply
Click to expand...
Click to collapse
You can try to do a hard reset I hope does it but it could be hardware issue.
Sent from my SM-A730F using xda premium
The hard reset doesn't work because the phone reboots when I enter to the recovery mode.
Someone told me it may be because I let the phone go to 0%. Do you think it's possible? If that's right, what do you think I can do now?
Thank you
naovich said:
The hard reset doesn't work because the phone reboots when I enter to the recovery mode.
Someone told me it may be because I let the phone go to 0%. Do you think it's possible? If that's right, what do you think I can do now?
Thank you
Click to expand...
Click to collapse
In that case leave it plugged in for a day and then retry reseting. You calibration could be out of whack.
If you are using the Leeco supplied usb C cable, replace it with a higher quality cable.
naovich said:
The hard reset doesn't work because the phone reboots when I enter to the recovery mode.
Someone told me it may be because I let the phone go to 0%. Do you think it's possible? If that's right, what do you think I can do now?
Thank you
Click to expand...
Click to collapse
I am experiencing the exact same thing. So is someone else in another thread.
Completely stock now it's stuck in a boot loop and Recovery mode shows no options at all. Leaving it in Recovery mode leads to a reboot within 2-3 seconds.
Same as like me, i bought from bangggood 6months ago with problem sometimes restart again that ithink the issue from the software and then i try the Rom that iforget,after that hardbrick ohh no,a good news qfil is coming and i happy,even thought my device is turn on but the problem is same my device sometimes restart again,,,yeahhh at least my device is turn on
i try geneys 26s and root
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Genesys 26s Root
Thanks before
me to...somebody pls help me...:crying:

Custom Binary (SYSTEM) Blocked by OEM lock

hey guys i recently had an update on my s10+ and mid through the update the phone just powered off(it was plugged to the charger) and since then ive been stuck on a blue screen saying i have to use the emergency recovery function in the smart switch pc app so i downloaded the app and tried to do that but the app wont recognize my phone. i searched all over the internet i tried flashing with odin a previous version and even the version it was trying to update to but it all failed. it gets stuck around 50% through the install and just sits there for hours without continuing. i am hopeless and have no idea what else i can do i even took the phone to a repair shop and they also failed to fix this problem. my last resort would be changing motherboard but i doubt its worth it. anyone has ideas what else i can do in order to fix this issue?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Are you able to get in to oden mode Google this to see how it's done.....
Sent from my CPH1951 using Tapatalk
stinka318 said:
Are you able to get in to oden mode Google this to see how it's done.....
Sent from my CPH1951 using Tapatalk
Click to expand...
Click to collapse
no i am unable to get into download mode i tried everything possible but the phone wont respond its stuck on a blue screen saying " An error has occurred while updating the device software. use the Emergency recovery function in the smart switch pc software.
also the phone only power on when its plugged to charger or a pc but it has battery for sure
Here is something to try......no guarantee.
https://drfone.wondershare.com/android-issue/android-blue-screen-of-death.html
Sent from my CPH1951 using Tapatalk
stinka318 said:
Here is something to try......no guarantee.
they dont have the latest phones on their list. latest version available they have is s9 plus
Click to expand...
Click to collapse
MrJoni94 said:
stinka318 said:
Here is something to try......no guarantee.
they dont have the latest phones on their list. latest version available they have is s9 plus
Click to expand...
Click to collapse
Email them to see if they can help in some way not sure if they'll can but it is worth a try but as I said no guarantee.......
Click to expand...
Click to collapse
Not sure if you've tried this but maybe it will work...
1) Hold bixby, volume down and while holding these, put the usb-c cable in the s10 when connected to the PC. This will (hopefully) get you into download mode if the other method fails
2)If Odin is still recognizing your phone, you have hope.
3)Make sure you use the latest version of Odin. I have previously tried to flash a new firmware with an old Odin and failed
4)Once you have the right Odin, try flash the latest stock firmware you can find. You may not be able to downgrade once upgraded

Categories

Resources